Filters

List of ent-unit Tenders

List of latest ent-unit Tenders in Indian Tenders. Click on any ent-unit Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ent-unit Tenders.

All-Tenders (71)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49068720 | 28 May, 2025

Tender Value : 22.00 Lacs

Bikaner - Rajasthan

Tender for tender for periodical services of buildings at af stn bikaner; 1 taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed. 2 m&l for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces of wall and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 3 material and labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of brickor concrete surfaces of wall and finishing the surfaceseven and smooth without using extra cement complete all as specified and directed. 4 m&l for rendering 5 mm thick in cement mortar (1:3) on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 5 m&l for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over & including a coat of alkali resistant primer complete all as specified and directed. 6 m&l for preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applyingtwo coats of white wash (white or tinted) over & including a coat of alkali resistant primer all as specified and directed. 7 m&l for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint (tint as approved by ge )over and including a priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed. 8 materail and labour for preparation of plastered or unplastered old surfaces of walls and applying a coat of oil bound distemper on walls all as specified and as directed by engr-in-charge. 9 m&l complete removal of existing treatment on walls and applying two coats of oil bound distemperover and including one coat of primer over a coat of wall care putty complete all as specified and directed 10 materail and labour for preparation of plastered or unplastered old surfaces of ceiling and applying a coat of white wash on ceiling all as specified and as directed by engr-in-charge. 11 materail and labour for complete removal of existing treatment and preparation of plastered old surfaces of ceiling and applying two coats of white wash on ceiling all as specified and as directed by engr-in-charge. 12 m&l for applying 3 mm thick wall care putty on walls complete all as spd and directed 13 m&l for applying 3 mm thick wall care putty on ceiling complete all as spd and directed 14 materail and labour for preparation of plastered or unplastered old surfaces of walls andapplying a coatofexterior emulsion paint(tint as approved by ge ) on wall height upto 7.5 mt and any in position completeall as specified and directedbyengineer - in- charge. 15 materail and labour for complete removal of exhisting treatment andpreparation of plastered or unplastered old surfaces of walls andapplyingtwocoatsofexterior emulsion paint(tint as approved by ge ) on wall height upto 7.5 mt and in any position completeall as specified and directedbyengineer - in- charge. 16 materail and labour for preparation of plastered or unplastered old surfaces of walls andapplyingtwocoatsofexterior emulsion paint(tint as approved by ge ) on wall height from 7.5m to 15.0 mt and in any position completeall as specified and directedbyengineer - in- charge. 17 m&l for preparation of old decorated surfaces of walls / kerb stone / concrete (plastered or unplastered ) of any description over 10 cm girth or width, by brooming downetc & applying a coat of synthetic enamel paint of approved shade/tint complete all as specified and directed. 18 m&l for preparation of new or previsouly untreared surfaces of walls / kerb stone / concrete (plastered or unplastered ) of any description over 10 cm girth or width, by brooming downetc applying two coat of synthetic enamel paint of approved shade/tint over & including a coat of primer complete all as specified and directed. 19 m&l for preparation of old paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed. 20 m&l for preparation of old paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (1st quality) over filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish complete all as specified & directed. 21 m&l for preparation of old paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) incl for angle iron,fencing post,rolling shutter etc. complete all as specified & directed. 22 m&l forpreparation of old paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (1st quality) incl for angle iron,fencing post,rolling shutter etc. complete all as specified & directed.note: contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of date of commencement of work and shall keep in safe custody as directed by engineer-in-charge for incorporation in the works. 23 m&l for preparation of old decorated surfaces of over head resevoier 50000 gln capacity at 21 metre staging height, and applying two coats of exterior acrylic emulsion paint in camouflage pattern preparation of old decorated surfaces of railing, stair case and ci pipes ofover head resevoir 50000 gln capacity at 21 metre staging height, and appling two coats of synthetic enamel paint and complete all as specified.note:- (a) contractor shall take precaution for safety measures as per mes safety code. contractor shall quote his rates keeping this aspect in mind and nothing extra on this account shall be payable to the contractor.(b) unit rate of this item includes the following aspect:-(i) to provide complete scaffolding including safety belt to the workers as per directions of engineer-in-charge/ge.(ii) nothing extra shall be paid on account of increase in height, hence work shall be carried out for complete surfaces varied at height and no claim on account of more height shall be entertained. tenderer is hereby advised to see this factor before quoting his rate. 24 m&l for applying one coat of aluminium paint on old painted steel surface of chain link fencing including preparation of surface complete all as specified and directed by engineer-in-charge.

State Government

TRN :49069125 | 21 May, 2025

Tender Value : 7.28 Lacs

Kolkata - West Bengal

Tender for repairing of old ac machines at different places of state central library, kolkata- 1 dismantling,taken down of existing ac machines -( 4.5 tr tower ac machine & 1.8/2 tr split/cassette type ac) ( odus, idus and pipe lines)including all acceessories and handed over to the authority. 2 supplying, & fixing of m.s.angle structure for supporting the odus of the ac machines fabricated by fixing one no. additional angle iron of length approx 700 mm of ( 50 mm x 50mm x 5mm) with the existing 2 nos, ms angle whose one end will be duly grouted on wall incl. drilling 2 nos. holes in each channel cutting holes into the wall & gouting the same with cement concrete (1:1.5:3)etc.odus of the ac machine will be fixed on 2 nos. ms angle whereas rest 1 no. angle is to be used for making the platform for inspection purposewith the middle angle with 4 nos. ms flat of (25mm x6 mm) of length approx 460mm to be welded horizontally between those2 nos. grouted angle out of 3 nos. ms angle.whole structure to be painted properly by 2 coats of enamel paint.desing of the structure to be approved from e.i.c before execution of work.the entire structure must be safe to carry out maintenance of odus. 3 supplying,testing & commissioning of suction/ discharge copper pipe line in split air conditioning unit of 1.8 tr/2 tr & 4.5tr capacity tower ac machineincluding brazing, nitrile rubber insulation 6/9mm thick class o, etc complete as required. 4 supply and fixingcopper pipe line 3/8” 5 supply and fixing copper pipe line 1/2” 6 supply and fixing copper pipe line 5/8” 7 supply and fixing copper pipe line 1/4” 8 supply and fixing of 2.5 sq.mm 3 core cable wire for communication between indoor unit to outdoor unit.(brand approved by e.i.c) 9 supply and fixing of 2.5 sqmm 4 core frls copperflexible cable for communication between indoor unit to outdoor unit (brand approved by e.i.c) 10 supply & charging of r-32 gas with all arrangements as per direction of eic. 11 supply & charging of r-22 gas with all arrangements as per direction of eic. 12 system re -operation ,nitrogen gas flashing, after s/dressing, welding of copper pipe jointed line, gas pressure leakage testing with nitrogen gas,pressure holding upto 48 hrs. after leak testingmaking - negative 30psi vacuum for gas charge. 13 supply & fixing of outdoor unit fan blade of1.5 tr split ac machines. 14 checking,repairing of existing faulty pcb circuit with all required equipmentsof 1.5 tr. split ac machine as required as per dirction of eic. 15 checking,repairing of existing faulty pcb circuit with all required equipments of the circuit of 4.5 tr tower ac machine(both idu & odu) as per direction of eic. 16 supply & replacement of damaged fan motor forindoor unit of ( 1.8/2 tr) split type ac machines as per direction of e.i.c 17 s/f 3 phase electrical 3 pole contractor for 4.5 tr tower ac( make- chint ,cat-nc1-1810 or aprove make as per eic) 18 supply & replacement of outdoor unit fan motor of 1.8/2 tr splitac as per direction eic. 19 supply & replacement of outdoor unit fan motor for existing 4.5 tr tower ac(make: picl ac fan motor uh 1109, 250 w) or aprove make as per direction eic. 20 s/f ofrunning capacacitor 40+4 mfd (approved make) 21 supply & fixing of 1.5tr compressor(r-32/r-22) in the place of existing damaged one(aprove make as per direction of eic and suported for existing daikin/hitachi/blustar make ac machine). 22 supply & fixing compressor in the place of damaged one of existing 4.5 tr tower ac with all required arrangements (make: panasonic , model: c -sb373h8f) or aprove make as per direction of eic. 23 supply & laying pvc drain pipe 25mm dia with 6mm thick nitrile rubber insulation (make- supreme/oriplast) 24 hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, , per storey of building per vertical run

State Government

TRN :49020045 | 14 May, 2025

Tender Value : 0

Belagavi - Karnataka

Tender for tender for rate contract supply of drugs items to bims belagavi - zince oxide 20gm cream,zinc syrup 60 ml,xylometazoline 0.1% nasal drops 10ml,white petrolium 100% pure jelly 500gm,white petrolium 100% pure jelly 30gm,wax solvent ear-drops 10ml benzocaine 2.7%w/v+chlorbutol5%w/v+paradichlorobenzene2%w/v+turpentine oil-15%w/v,vitamin-e drops 50mg/1ml-15 ml,vitamin-d3 60000 iusachet,vitamin d3 400-iu 15ml (drops),vitamin b complex 200ml (syrup),vitamin a syrup (60 ml),vitamin a solution (100ml),ultra sound gel (5kg),turpentine oil (100ml),tropicamide- 5ml eye drops,triple combination cream (momethasone 0.25% with tretin 0.1% with hydroquinone 2.0%) 15 gm,triamcinolone 0.1% w/v 5gm oral ointment,tretinoin 0.025% cream,topical5% emla cream 15gm,topical lignocaine 25mg/g, prilocaine 25mg/g cream-5%- 5 gm (cream),tobramycine 0.3%10ml (eye drops),tincture benzoine (100ml),timolol maleate 10ml eye drops,thrombophobe ointment (20gm),theophylline with etophylline (200ml syrup),sucralphate (170ml syrup),soft roll (15cm x3mtr),soft roll (10cm x3mtr),sodium valproate 200mg/100ml (syrup),sodium phosphate enema (100 ml),sodium hypochloride 5-6% solution 5ltr,sodium hypochloride 5-6% solution 20litr,sodium chloride (nasal drops),sodium by carbonet ip 600gms with sodium-chloride ip 230gms t packets 1x830,silymarin l-ornithine l-asparatate (200 ml syp),silver sulphadiazine -15gm cream,silver sulphadiazine -100gm cream,sildenafil oral suspension 10 mg/ml,salbutamol-nebulisation repsules 2.5mg 2.5ml (amp),salbutamol- nebuliser solution (salbutamol 100microgram/actuation pressurised inhalation 200 actuations(pi,cmi)-15ml.,salbutamol 2mg (100ml syrup),prednisolone acetate 1% + hpmc 0.25%-5 ml eye drop,povidone iodine solution in dark plastic bottle 500ml 5% w/v (500ml),povidone iodine ointment 5%w/v (15gm),povidone iodine ointment 5%w/v (125gm),povidone iodine cleansingsolution in dark plastic bottle 7.5 %w/v (500ml),potassium chloride (200ml syrup),pop roll 2.7 mtr x 15 cm (1roll),pop roll 2.7 mtr x 10 cm (1roll),phenytoin sodium 125mg (100ml syp),phenobarbiton 20 mg/5 ml-(100ml syp),permethrin 5% 30gm ointment,paracetamol 125mg/100ml (syrup),ors (who formula) 21gm,orodispersible probiotic sachets 2 gm-10 (sachets.),ondansetron 4mg/5ml 30ml (syrup),nuprep gel (114 gm),normal saline nasal 10ml drops,neomycin sulphate, polymyxin b sulfate and hydrocortisone 5 ml ear drop-,natamycin 5ml eye drops,mupirocin 2% 5gm ointment,multi vitamin with zinc 200ml (syrup),multi vitamin (zinc+b12+b-comp) drop-30ml,moxifloxacin 0.5%5ml eye drops,moxifloxacin 0.5% 5gm eye ointment,mometasone 1% 15gm (cream),micropore plaster size1.25cm x 9.1mtr 0.5 inch1roll (tissue plaster),micropore plaster size 7.5 cm x 9.1mtr 3inch 1roll(tissue plaster),micropore plaster size 2.5 cm x 9.1 mtr 1inch 1roll (tissue plaster),metronidazole 1.5% w/w -20gm gel,mefenamic acid with paracetamol 50+125mg/5ml 60ml (syp),mct oil 100ml (medium chain triglyceride (mct oil (100ml),luliconazole cream 1%w/v (10gm),liquid paraffin (60ml),lignocaine gel 2% (30gm),lignocaine 10% 50ml (spray),levetiracetam 100mg/ml (syrup),lactulose (200ml syrup),ketokonozol 2%with zinc payrithione 1% (100ml),ketoconazole 2% 20gm (cream),iron and folic acid-30 ml (drops),iron and folic acid (200ml syrup),ipratropium(500.0 mcg) + levosalbutamol / levalbuterol(1.25 mg) 3 ml (respules),hydrogen peroxide solution (100ml) amber bottle wrapped with black thick polybag with printed label 6% w/v,hmf sachet 2gm ( (lactodex hmf nutritional supplement sachet, 2 gm/sachet) sachet,haemocoagulase drops (10ml),glycin irrigation- (3ltr),glycerin-(100ml),glycerin & sodium chloride enema (20ml),glucose-sachets 75gm (dipsi-test),frusemide 10mg (30ml syp),framycetin sulphate 1% 10gm (skin cream),formoterol 6mcg with tiotropium 9mcg mdi 200 metered dose (inhalar),formaldehyde (5ltr),fluticasone propionate 50mcg (nasal spary) 120 meter doses,fluticasone propionate 250mcg with salmetero-25mcg mdi (120-metered dose inhalar),fluconazole cream 0.5%w/v-15gm,ferrous sulphate 20 mg/5ml (200ml syp),faropenem 50mg/5 ml (30ml syp),elemental calcium-300mg + elemental magnesium-75mg + elemental phosphorus-150mg + elemental zinc-4mg + vitamin d3-200iu3 (syp),eeg gel (250gm),ecg gel (250gm),dysodium hydrogen 100 ml(syp),dinoprostone gel for endocervical application( 3gm),dihydroxy1.6 dioxyhexane2.5(chemically bound formaldehyde11.2g glutaraldehyde 5gm benzalkonium chloride 5g alkyiureaderivative 3g aqueous base qs solution) (5ltr),digoxin 50mcg/1ml (30ml syp),diclofenac transdermal patch (100mg),diclofenac gel (diclofenac 1%+methyl salicylate 10%+menthol 5.0%) 1.00w/w (30gm),dichlorometaxylenol lotion (1 ltr),dextrose monohydrate s75 powder sachet (75gm),dextrometharphan hbr-10mg + chlorphenarmine maleate-2mg / 5ml100ml (cough syrup),dental oral-gel with lignocaine 2% 15gm,cotrimaxole 60ml (syp),clotrimazole 1%w/w 15gm (cream),clortimazole10ml (ear drops),clobetasol propionate 0.05%w/v salicylic acid3 %w/w 20gm cream,clindamycin hcl 60ml(syp),clasic paraffin gauge dressing 10cmx 10cm (pack of 100 dressings) (cuticell/equivalent),clarithromycine-250mg/5ml (syp),citro-sterile (5ltr),ciprofloxacin0.3%w/v eye/ear 10ml (drops),ciprofloxacin eye 10gm (ointment),ciprofloxacin 0.3%with 0.1%dexamathasone w/v 10ml (eye/ear drops),chlorhexidine mouth wash (100ml),chlorhexidine gluconate+cetrimide lotion+iso propyle alcohol (1ltr bottle),cetirizine hcl 5mg 60ml (syrup),calcium + vitamin d3 200ml (syrup),calamine lotion (60ml),budesonide-nebulisation solutions 0.5mg/2ml,budesonide (400mcg) with formoterol 6mcg mdi (metered dose inhalar),budecort(0.5) nibulisation solution per 2ml,betamethsone valerate cream tube (15gm),betamethasone 0.1% (ointment),benzoyl peroxide-2.5% 20gm (cream),benzoic acid 6% w/w and salicylic acid 3% w/w 15gm (ointment),beclomethasone with fusidicacid (10gm),barium sulphate powder (5kg),barium sulphate (1ltr),bandage cloth individually packed in poly-pack-1mtr x 20mtr (schedule f-ii as per d&c act),amoxycillin 400mg+clavulanate acid 57 mg 30ml (dry syrup),amoxycillin 125mg/1ml (drops),alcoholic hand rub 500ml (hand rub),adhesive tape (10 cm x 10 mtr roll),acyclovir 400mg ( (syp)),acyclovir 1% eye ointment,activated glutaraldehyde (5 litre),acid concentrate low potassium (1x20ltrs),acid concentrate bp with dextrose awa packing (1x20ltr),acetic acid 2% w/v ear dops,absorbent cotton wool (net weight) 500gm,zinc sulphate 20 mg dispersable (tab),xanithol nicotinate 500mg (tab),warfarin sodium-5mg (tab),voglibose-0.2mg (tab),vitamin-b complex(therapeutic) nfi (tab),vitamin -d3 60000 iu (tab),vitamin c chewable-500mg (tab),verapamil hydrichloride (tab) (calaptin) sr-40mg (tab),ursodeoxycholic acid 300mg (tab),trihexy phenidyl hydrochloride 2mg (tab),tinidazole-500 mg (tab),theophylline. with etophylline-23mg /77mg (tab),theophylline with etophylline 35mg/115mg (150 retard) (tab),thalidomide 100mg (tab),terbinafine-250mg (tab),telmisartan-80mg (tab),telmisartan-40mg (tab),telmisartan 40 mg+hydro chloro thiazide 12.5mg (tab),tamsulocin (0.4mg) with tolterodine (4mg) (tab),tamsulocin (0.4mg) with tolterodine (2mg) (tab),tamoxifen (tab),tadalafil 10mg with dapoxetine 30mg (tab),sodium valproate-500mg (tab),sodium valproate-200mg (tab),sildenafil citrate-50mg,sildenafil citrate-25mg,sertraline-50mg (tab),serratiopeptidase-10mg (tab),risperidone-2mg (tab),racecodotril 100mg-cap.,pyridoxine hydrochloride 40mg (tab),propranolol hydrochloride long-acting tab 20mg (ciplar la- 20mg) -tab,prochlorperazine (maleate) 5mg (tab),prednisolone-10mg (tab),prednisolone 40mg (tab),posaconazole-100mg (tab),phenytoin sodium (film coated)- 100mg (tab),phenylepherine 10mg (solvin or equivalant) (tab),phenobarbitone-60mg (tab),phenazopyridine hydrochloride (tab) (pyridium (tab)),pentoxyphilline 400mg (tab),paracetamol ip 500mg (tab),pantoprazole 40mg-(tab),oxybutinin 5mg-(tab),oxybutinin 2.5mg (tab),omeprazole ip 20mg (tab),olanzapine-10mg (tab),olanzapine -5mg (tab),ofloxacin ip 200mg (tab),norfloxacin 400mg-(tab),nitazoxanide-500 mg (tab),nintedanib 150mg (tab),nifedipine-10mg (tab),nifedipine sustained release (tab) 10mg (nicardia retard 10mg (tab)),nicorandil 10mg (tab),nicardia rtd 20mg (tab),naproxane-200 mg (tab),multivitamin-a-800 iu b1-0.5mg b-20.5mg b6-0.5 mg d3-50 iu niacinamide 10mg (tab),moxonidine 0.3 mg (tab),montilukast+levocetirizine-10mg+5mg (tab),misoprostol-200mcg (tab),mifepristone 200mg (tab),metronidazole 400mg-(tab),metoprolol-50mg (tab),metformin-500mg (tab),losartan 50mg (tab),lorazepam-2mg (tab),loperamide-2mg (tab),lithium carbonate-300mg (tab),levofloxacin 500mg (tab),levocetirizine 5mg (tab),levocetirizine 10mg (tab),lactobacillus 120mg (tab),labetalol 100mg (tab),ivermactin 12mg (tab),isoxuprine hydrochloride 20mg (tab),isosorbide dinitrate-10mg (tab),iron-folic acid(adult)containing iron equivalent to 100mg elemental iron and folic acid 0.5mg-335mg and 0.5mg (tab),imipramine hcl-25mg (tab),ibuprofen(film coated)400 mg (tab),hydroxychloroquin hcq 200mg (tab),haloperidol-5mg (tab),griseofulvin 250mg-(tab),glimepiride 1mg (tab),glibenclamide-5mg (tab),ginkgo biloba (tab),gastro-resistant acamprosate calcium 333mg (tab),furosemide (20mg) with spironolactone (50mg) (tab) (lasilactone 50mg),frusemide 40mg-(tab),folic acid 5mg (tab),fluoxetine-20mg (tab),fluconazole-150mg (tab),ethambutol 275mg with isoniazid 75mg with rifampicin 150mg (eg-(tab) akurit 3, tab trac 3),ethambutol 275mg with isoniazid 75mg with pyrazinamide 400mg with rifampicin 150mg (eg-tab akurit 4,tab trac 4) (tab),enalapril maleate 5mg (tab),doxylamine 10mg (tab) (doxylamine succinate pyridoxine folic acid (tab)lets, 20 mg),doxycyclin ip 100mg (cap),domperidone ip 10mg (tab),digoxin-0.25mg (tab),dicyclomine 20mg (tab),diclofenac sodium ip 50mg (tab),diazepam 5mg-(tab),desmopressin (tab)let 0.1mg (tab),darifenacin 7.5mg (tab) (derifenacin hydrobromide extended-release (tab) ip 7.5mg),darifenacin 15mg (tab),cyclophosphamide 50mg (tab),cotrimoxazole ip ds (sulphamethoxazole 800mg+trimethoprim 160mg) (tab),clopidogrel 75mg (tab),clonazepam 0.5mg (tab),ciprofloxacin ip 500mg (tab),chlorpromazine-50mg (tab),chlorpromazine-100mg (tab),chloropheniramine maleate 4mg (tab),chlordiazepoxide-25mg (tab),cetrizine 10mg, phenylephrine 10mg (tab),cetirizine hydrochloride bp 10mg (tab),cefixime 200mg (tab),carveidalol 6.25mg (tab),carbamazepine-200mg (tab),calcium+vitamin d3 500mg (tab),calcium citrate with malate 1000mg (tab) (calcium citrate malate 1000mg, vitamin d3 200 iu, elemental magnesium 100mg and zinc 4mg. (tab),bisacodyl(enteric coated) 5mg (tab),bisacodyl suppositories ip 10mg tab,bethanechol 25mg (tab),betamethasone 0.5mg (tab),azithromycine 500mg (tab),atorvastatin 10mg (tab),atenolol 50mg (tab),aripiprazole 30 mg tab,amoxycillin with pot-clavulanate 625mg (tab),amoxycillin 500mg (cap),amlodipine 5mg(tab),amitriptyline 25mg (tab),amiodarone 200mg (tab),alprazolam 0.25mg (tab),alfuzocin with dutasteride (tab) (alfuzosin hydrochloride 10mg + dutasteride 0.5mg generic drugs),albendazole ip 400mg (tab),acyclovir 400mg (tab),acitretin 25mg (cap),acetyl salicylic acid (enteric coated) 75mg (tab),vitamin k 1mg/1ml (injection),vitamin k 10mg/1ml (injection),vitamin b-complex 500mcg/ml 2ml (injection),vecuronium bromide 4mg 2ml (injection),vancomycin-500mgpantoprozloe 40mg/10ml with sterile water for injection (injection),tryphan blue 0.6% solution (injection),triamcinolone acetate (preservative free) 40mg (injection),triamcinolone 10mg (injection),triamcilone acetonide 80mg (injection),tranexamic acid 100mg/5ml (injection),tramadol 2ml (injection),total parenteral nutrition (tpn) 1500ml (injection iv),thiopental sodium 500mg (injection),thiamine 100mg/ml (injection),theophylline+etophylline 23mg+77mg/1ml (injection),tetanus toxoid 0.5ml amps (injection),tetanus immunoglobulin 500iu (injection),surfactant (each ml contains 25mg of phospholipids) intratracheal suspension sterile-4ml vial (injection),streptokinase 15lakh iu (injection),sterile succinylcholine chloride 20mg/ml (injection),sodium valproate 100mg/ml (injection),sodium tetradecyl sulphate (injection),sodium flourescien 20% 3ml (injection),sodium chondroitin sulfate 40mg with sodium hyaluronate 30mg with monobasic sodium phospate dihydrate (injection),sodium chloride iv 0.9% 3ltrs (injection iv),sodium chloride 3% 100 ml (injection iv),sodium chloride 0.9% w/v 100ml iv (injection iv),sodium chloride 0.9% w/v iv fluid 5ltr (injection iv),sodium chloride 0.9 %w/v 1000ml iv ffs (injection iv),sodium chloride 0.9 % w/v 500ml iv ffs (injection iv),sodium bicarbonate 7.5% w/v amp 10ml (injection),snake venom antiserum ip lyophilized polivalent powder form with sterile water for (injection),sevoflurane 250ml (injection),ropivacain hydrochloride in dextrose injection (ropin 0.75% heavy) 4ml (injection),ringers lactate solution for 500ml iv ffs bottle (injection iv),retiplace 18mg (injection),ranitidine ip 25mg/ml (injection),rabies vaccine-purified tissue culture 2.5 iu im/id 0.5 ml wfi combi pack 1ml x 1ml water for injection (injection),rabies immunoglobulin 1500 iu/5ml (injection),rabies human monoclonal antibody(rdna) 40iu/2.5ml (injection),pure crystalline essential amino acide i.v. infusion 200ml (hermin infusion or equivalent) (injection),protamine sulphate 10mg (injection),propofol 10ml 10ml (injection),promethazine hcl 2ml (injection),pralidoxime chloride 1gm 1gm+1water for injection (injection),potassium chloride 10ml (injection),plasma expander (hydroxy ethyl starch 6%)-500 ml iv (injection iv),piperacillin 4gm+tazobactam 0.5 gm (injection),pilocarpine nitrate 0.5% w/v 1ml (injection),phenytoin sodium 2ml (injection),phenobarbitone sodium 2ml (injection),pheniramine maleate 2ml (injection),pge2 infusion (injection),pentazocine lactate-30 mg1 ml (injection),paracetamol 500mg/100ml (injection iv),pantoprozloe 40mg/10ml with sterile water for injection (injection),oxytocin 1ml 5iu/ml (injection),ondansetron 2mg (injection),ofloxacin 100ml iv ffs (injection iv),octreotide-100mcg-1ml (injection),nor adrenaline-2ml (injection),nitro glycerin 25 mg-5ml (injection),neostigmine methyl sulphate-1ml (injection),multiple electrolytes and dextrose (paediateric)-iv ffs- 5% (injection iv),multi vitamin 10ml (injection),morphine 10mg/2ml (injection),midazolam 5ml vial (injection),metronidazole iv 100ml ffs (injection iv),metoclopramide 2ml (injection),methylprednisolone 1gm with sterile water for injection (injection),methylene blue vial 10ml/10mg (injection),methyl prednisolone 40mg vial with sterile water for injection (injection),meropenam 1gm with sterile water for injection (injection),mephentermine-10ml (injection),mannitol-(positive oral)100ml (injection),mannitol-(nagative oral)100ml (injection),mannitol 20% 100ml iv ffs (injection iv),magnesium sulphate 500mg 2ml (injection),l-ornithine l-aspartate 500mg (injection),lorazepam 2ml (injection),linezolid 300 ml (injection iv),lignocaine 4% 30ml(topical) (injection),lignocaine 20mg with adrenaline 0.01mg 30 ml amber colour vial (injection),lignocaine 2% w/v-30ml vial (injection),lignocaine 2% 50ml vial (equivalent to xylocard) (injection),levofloxacin 500 mg/100ml (injection iv),leveteracetam-5ml (injection),labetalol inj 5mg/20ml vial (injection),ketamine 10ml vial (injection),isoflurane-250ml (injection),iron sucrose-5ml (injection),iohexal 350mg/100ml (omnipaque) (injection),iohexal 300mg/100ml (injection),iodixanol 320 mg/100ml (injection),insulin human (rapid acting) 10ml-40 iu/ml (injection),hyoscine butyl bromide amp-1ml (injection),hydroxy propyl methyl cellulose prefilled syringe-3ml (injection),hydrocortisone sodium succinate 100mg/vial with sterile water for injection (injection),hyaluronidase 1ml amp 1500iu/ml (injection),human albumin 20% -100ml (injection),hepatitis-b vaccine vials (injection),hepatitis b immunoglubin 100 iu-1ml (injection),heparin 5000 iu-5ml (injection),haloperidol-5mg/1ml (injection),haemocoagulase aqueous 1n.i.h thrombin unit/ ml or equivallent unit-1ml (injection),glycopyrrolate 0.2mg/1ml (injection),gentamicin ip each 2ml contains gentamycin 80mg (injection),ganciclovir 250mg (injection),gadodiamide 0.5 mmol/ml 20ml (omniscan) (injection),frusemide inj 2ml (injection),fluphenazine 1ml (injection),fluconazole-100ml iv (injection iv),five-fluoroucracil 500mg/10ml (injection),ferric carboxy maltose- 500mg/10ml (injection),fentanyl citrate 50mcg/ml (injection),fentanyl 100 mcg/2ml (injection),erythropoietin 4000 iu pre filled syringe (pfs) (injection),enoxaparine (lmw prefilled syringe) 40mg (injection),drotaverine-2ml (injection),dopamine hydrochloride-5ml (injection),dobutamine-5ml (injection),diltiazam-5 mg/ml (injection),diclofenac sodium ip 25mg/ml (injection),diazepam-2 ml/5 mg ( (injection),dextrose 500 ml-iv ffs inj 10% w/v (injection iv),dextrose 500 ml-iv ffs 5% w/v (injection iv),dextrose 5% with sodium chloride 0.9%- 500 ml-iv ffs (injection iv),dextrose 25% 25ml (injection),dexamethasone sodium phosphate 2ml (injection),darbepoetin 40mcg/0.4ml (injection),cyno acrylate glue (injection),cyclophosphamide 500mg vials (injection),cyanocobalamin 500 mg+folic acid 15mg+niacinamide 200mg (injection),cloxacillin 500 mg (injection),cloxacillin 250 mg (injection),clindamycin phosphate-150mg/ml (injection),ciprofloxacin iv ffs-iv-100 ml (0.2% w/v) (injection iv),ceftriaxone 1000mg with sterile water for injection (injection),cefotaxime sodium 1000mg with sterile water for injection (injection),carboprost tromethamine 1ml 250mcg (injection),calcium gluconate 10ml (injection),bupivacaine hydrochloride 0.5% 20ml (injection),bupivacaine hcl in dextrose (heavy) 4ml (injection),bleomycin 1510 (injection),biphasic isophane insulin 30/70 (recombinant human monocomponent insulin)-10ml (injection),benzathene penicillin ip-12lakhs with sterile water for injection (injection),atropine sulphate100ml (injection iv),atropine sulphate 1ml amp (injection),atracurium besilate-2.5ml 10mg (injection),artesunate-60mg (injection),anti-d rh immunoglobin vial monoclonal-300mcg (injection),anti diphtheria 10000iu/ serum 10ml,ampicillin 500mg with sterile water for injection (injection),ampicillin 250 mg with sterile water for injection (injection),amphotercin b 50mg(liposomal) (injection),amoxycillin sodium+clavulanate potassium 1200mg with sterile water for injection (injection),amiodarone sterile concentrate-3ml 150mg (injection),aminophylline 10 ml amp (injection),amino acid infusion containing l-arginine histidine hcl isoleucine leucine arginine phenylalanine threonine tryptophan valine glycine sorbitol methionine lysine ffs 200ml (injection iv),amikacin sulphate ip 500mg/2ml (injection),amikacin sulphate ip 250 mg/2ml (injection),amidotrizoate meglumine(urograffin) sodium amidotrizoate 76% (injection),adrenaline 1ml (injection),adrenaline 11000/1ml(epitrate 1ml) (injection),adenosine 6mg (injection),acyclovir 500 mg/10ml (injection),acetylcysteine2ml (injection)

State Government

TRN :49020462 | 15 May, 2025

Tender Value : 0

Akola - Maharashtra

Tender for rate call for ( non dsr) items preparing estimate of under honble balasaheb thackeray haridra research and traning centre,vasmat,dist.hingoli =2 providing & fixing on site 75 mm thick reflexology ( pebbles ) stone flooring etc complete 3 providing & laying of hdpe pond liner of 750 micron thickness as per manufacturer’s specification & instructions from engineer in charge etc. complete. 4 orientation signage pole :- providing & fixing of orientation signage pole made up of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), with the size of 12x4inner frame and 60mm dia for support structure made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. these frp pole is individually crafted) which usually require maintenance and care. the structure will be illuminated from within. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structural stability certificate will be given etc complete 5 identification signage pole :- providing & installation of identification signage pole made up of marine quality composite from 60mm dia for support structure {marine grade corrosion resistant & hydrocarbon solvent resistant) with all fittings fixture, hardwares , all as per design & drawings with all fittings, fixtures etc. complete , with the size of 6x1.5inner frame made of mild steel pipe od 60mm as the main support section is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. these frp pole is individually crafted) which usually require maintenance and care. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structural stability certificate will be given etc complete 6 directional signage -5m single arm frp pole with haldi banner and leaf (signage): the single arm pole shall be made of 68 mm dia with metal hot dipped galvanized pipe support inside the frp cladded pole. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of is:3601 or equivalent, hotdip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. these frp pole is individually crafted which usually require maintenance and care. pride suspended luminaire: 50 watt led suspended luminaire with height 450mm and width 500mm. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structural stability certificate will be given etc complete 7 directional signage post :-providing & fixing of directional signage post (signage) with 5ft height and 700mm wide post and 48 mm dia support pipe with frame having and metal frame to show the directional or location of certain area. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer incharge etc. complete on site. structural stability certificate will be givenv 8 haldi information post :- providing & fixing of haldi information post- farming (signage) with 5ft height and 700mm wide and 48 mm dia support pipe with frame having a metal frame work to be used for provided information regarding the harida haldi project and which type of haldi crop grown on the particular field. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. these frp pole is individually crafted) which usually require maintenance and care. item is also including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structural stability certificate will be given etc complete. 9 pergolas type 1:- providing & fixing of type 1 pergolas with frp column 200mm x 200 mm in ms fabrication use in 88.2 od ms pipe 3 mm thickness. frp beam size 150 mm x 150 mm in ms fabrication 40 mm x 40 mm x 2 mm thickenss tube in framing. frp support for beam and column use in 75 mm x 75 mm x2 mm ms tube with frp cladding. frp thickness minimum 3 to 4 mm . column fittng in 12 mm x 150 mm anchor bolt in foundation. including installation machineries, scaffoldings, electricity, other site utilities in client scope. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. item is including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structure stability certificate will be provided etc complete 10 pergolas type 2( for seating areas ):- providing & fixing of type 2 with frp column 200mm x 200 mm in ms fabrication use in 88.2 od ms pipe 3 mm thickness . frp beam size 150 mm x 150 mm in ms fabrication 40 mm x 40 mm x 2 mm thickness tube in framing. frp support for beam and column use in 75 mm x 75 mm x2 mm ms tube with frp cladding. frp thickness minimum 3 to 4 mm . column fitting in 12 mm x 150 mm anchor bolt in foundation. including installation machineries, scaffoldings, electricity, other site utilities in client scope. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. type 2 (for seating areas ). item is including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. complete on site. structure stability certificate will be provided etc complete. 11 providing & fixing of type 01 module ( with back rest) frp seating with pvc wooden panel (1.5m with wooden panel on top) bench should be made in combination of 80 mm dia and 40mm dia pipe marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant), 2.4m x 0.45m (module) the product should be an all weather proof & maintenance free with long design life. it should be self colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. 12 providing & fixing of type 02 module ( without back rest) frp seating with pvc wooden panel bench should be made in combination of 80 mm dia and 40mm dia pipe marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant), 2.4m x 0.45m (module) the product should be an all weather proof & maintenance free with long design life. it should be self coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life . item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. 13 providing & fixing of type 01 module ( with back rest) frp seating with pvc wooden panel (1.5m with wooden panel on top) bench should be made of 80 mm dia and 40mm dia pipe marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant), 2.4m x 0.45m (module) the product should be an all weather proof & maintenance free with long design life. it should be self colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. 14 providing & fixing of type 02 module ( without back rest) frp seating with pvc wooden panel (1.5m with wooden panel on top) bench should be made of 80 mm dia and 40mm dia pipe marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant), 2.4m x 0.45m (module) the product should be an all weather proof & maintenance free with long design life. it should be self colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. 15 dustbin frp dustbin should be made of marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant) all weather proof & maintenance free with long design life. the product should be 700 x 500 frp planter with basic design and 40 x 20mm sq. pipe to support the section of dustbin. it should be selfcolored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. the glass fiber reinforced polymer camouflage should be of thickness 3 to 4 mm average with sizes 2000x600 mm. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. 16 providing & placing at position type1 of 700mm x 305mm frp plantershould be made of marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant). the product should be 700 x 305 frp planter with basic design and all weather proof & maintenance free with long design life. it should be self-colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. the glass fiber reinforced polymer camouflage shall be of thickness 3 mm average. product should come with a 12 month warranty against any manufacturing defect etc complete 17 providing & placing at position type2 of 610 mm x 254 mm frp planterfrp planter should be made of marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant). the product should 610 x 254 frp planter with basic design and all weather proof & maintenance free with long design life. it should be self-colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. the glass fiber reinforced polymer camouflage should be of thickness 3 mm average. product should come with a 12 month warranty against any manufacturing defect etc complete 18 providing & placing at position type3 of 510 x 200 frp planter frp planter should be made of marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant). the product should 510 x 200 frp planter with basic design and all weather proof & maintenance free with long design life. it should be self-colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. the glass fiber reinforced polymer camouflage should be of thickness 3 mm average. product should come with a 12 month warranty against any manufacturing defect etc complete 19 tree grating:- providing & fixing of frp tree grating of size 1100 x 1100 x 25 mm frp material with various design options. made of marine quality composite (marine grade corrosion resistant & hydrocarbon solvent resistant), the product should be an all weather proof & maintenance free with long design life. it should be self-colored textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint, with long standing life. as per design & drawings with all fittings, fixtures etc. complete. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site.. 20 custom design, supply & installation /surfacing of epdm 6 mm & 19 mm rubber crumbs at site etc complete 21 providing & fixing of tumble twin with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 22 providing & fixing of animal mgr with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 23 providing & fixing of deluxe junior see saw with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 24 providing & fixing double post swing with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site etc complete 25 providing & fixing duck rider with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 26 providing & fixing fun walker single with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 27 providing & fixing step trainer with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 28 providing & fixing chest press double with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 29 providing & fixing shoulder press double with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 30 providing & fixing tai chi cum standing twister with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 31 providing & fixing leg press cum parallel bar with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 32 providing & fixing leg press cum seating twister with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site 33 providing & fixing of cobble stone of basalt 100 mm x 100 mm & 40 to 50mm thick etc complete 34 providing, fixing & installation of 18mm thick grc ( glass reinforcedconcrete ) of high quality iso grade upto 2.4 mtr height with 18mm grc chopped strands includingpure white cement , silica sand for finishingwith coating of sbr liquid or equivalent chemical for bonding work with all fittings, fixtures hardwares, wax polishing, caster, fitter, labour charges, scaffolding etc. complete as per design, drawings & manufacturer’s specification also as per instructions from engineer in charge etc. complete. sbr liquid will be used for bonding of various materials of the structure which also helps in waterproofing and adhesion giving it a long life durability specially multi dies will be made using cnc machine giving it a high precession for the design of the structure. material is made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant). its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life including structural stability certificationetc complete. 35 providing, fixing & installation of 4 mm thick frp ( fiber reinforced polymer) material high quality iso grade. frp material placed above grc of high quality iso grade material as per design, drawings & as per manufacturer’s specification & instructions from engineer in chargeincluding all hardener, fittings, fixtures, welder, patch work,labours charges, scaffolding etc. complete . the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life including structural stability certification etc complete. 36 providing & applying weather finish coating & lackering of 100microns to all surfaces of grc & frp with all rubbing, finishingwith all equipments, labours, scaffolding all as per design, specification & instructions from engineer in charge etc. complete 37 waterproofing cum insulation composite system:-cleaning the surface to make it dust free andsludge free, removing any extended portions by grinding and if required using suitable equipment’s and should be totally dry & have proper slope for free flow of water preparing the surface by spray applying a coat of bitumen primer @0.25-0.35kg/square metre over the entire dust free surface. providing and applying single layer of ultraplast b app- 4mm (atactic polypropylene polymer) modified water proofing membrane reinforced with non-woven polyester matt 160+20 g/m2 having polymer film as a top surface. minimum tensile strength in longitudinal and transverse direction as 750n +150 / 600n +120/5cm (astm d 5147). minimum nail shank tear resistance in longitudinal and transverse direction as 300/300n + 100 n (astm d 4073) elongation in longitudinal and transverse direction 40+8% / 45+9%. softening point of membrane not less than 150 + 5 degree celsius consisting of a coat of technonicol bitumen primer no 01 primer @ 0.25- 0.35 ltr./sq.mtr with a relative viscosity of 15-40 s,. over the primer coat, the layer of membrane shall be laid using butane / lpg torch and sealing all joints with minimum 75 mm side laps & 100 mm end laps to form a monolithic system. the laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane etc complete. 38 providing and laying leed certified carbon prof 300 extruded polystyrene 50mm thick having thermal conductivity of 0.028 w/mk (astm c 177) with compressive strength of > 300 kpa (astm d 1621 en 826) and density of 30-35 kg/m3. long term water immersion astm c 272 (en12087) < 0.7% over the waterproofing membrane having shiplap arrangement. work shall be done through the authorized applicator of the manufacturer of the insulation boardetc complete. 39 prviding & fixing glassreinforced concrete (grc)25mm jali as per deign & details etc completed. 40 providing and fixing heavy gauge galvinsed iron 50”fan with autoopening 10shutters, drop hamper exhaust fan systems with 6 no.ss blades with low noise , cfm:-25890, auto opening shutters damper type 415v,50hz, 1.5hp motor, 3hp with fitting etc complete.cellulose cooling pad 1200mmx600mmx100mmt one pad contain area of 1 0 sqft, leading kit with pipeline upto frame,- bypass, filter flush system etc.6”aluminum frame for the above coolingpads with top water distribution and bottom gutter, aluminum 41 providing & fixing air circulation fans 7 blades ss aluminum powder coated of model gtacf-40-70, size of d320mmxh400, 50hz , 1400 rpm, 220v, 120w, single phase, 70 ft airflow etccomplete. 42 automatictemp humidity controller- providing & fixing microprocessor based temp & humidity controller excluding moisture sensors, electrical control panel for fan,cooling pad, pump, mcb, contractor, olr, auto manual switching on/of fswitches ip55 cabinet, electrical cable 1 .5sqmm 4core for fans and pads,sensor cable 4core 0.5square mm etc complete. 43 providing & fixing controller - plc & hmi based control, drip valves control -2 nos,dosing valves control- 3nos ( a-b,c-acid), filling pump, system pump, air pump control, mixing valve control, phase missing prevention, over current prevention control, operation modes: auto -manual-bypass. 44 providing & fixing dosing unit includes dosing channels - 3nos @400lph with flow indicatiors & regulators, dosing valves - 3 nos (a-b,c-acid ), system pump - 30klph@35m head- ss 316 grade, dosing line filters-3nos 45 providing & fixing flow sensor of 3” as per design & drawing etc complete. 46 providing & fixing regenerative air blower-385cfm for 2 stocks mixing as per design & drawing etc complete. 47 providing & fixing solenoid valvesof 2” as per design & drawing etc complete. 48 providing & fixing exhaust fans -1.5hp 3phase- 16 nos4 controls ( each control 4 fans) pad pump - 3hp, 3phase- 1no fogging pump-5hp- 1no acf- 0.5hp- 1phase- 32nos - 1 control (3 phase load distribution) temperature sensor - 1no etc complete. 49 providing & fixing pressure release valves of 2” as per design & drawing etc complete. 50 providing & fixing total galvinsed iron structure of column pipes, profile, zig-zag spring, locking, perlins, tie bar, cross, gutter purlin, hockey , hockey memeber, hockey runner, nagarpatta, galvinsed gutter sheet, l, f brcackets, clamps, bolts , nuts, self drilling screw, spring, sliding pulley, netring, curtain clamps, door cup, handle, fiber door, hole pass. above all incudes, complete structure- erection, fixing etc complete. 51 poviding & fixingpoly film, 50% shade net, 30% side net with 6.5m center height,d rain out, israel make ginegar diffuse 200micron. above all incudes, making foundation, completestructure- erection, fixing etc complete. 52 providing & fixing high-tech irrigation system including inline drip lateral, inside main and sub main pvc pipes, fogger system, sand filter, disc-filter, ventury system with instillation & testing. 3024 sqm etc complete. 53 providing &fixingweed control mat 3000 sq mtr 120 gsm as per design & drawing etc completed. 54 providing &fixingplastic trough20:50:20500 micron 6000 running mtr etc complete. 55 providing & supplying low electrical conductivity coco-peat as instructed etc complete. 56 constructing stormwater channel with (random rubble masonary) rrm stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking rrm joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing ci frame in rrm and ci grating (heavy duty) etc. complete. (ci grating and frame make: neco or equivalent) 300mm wide channel, 300mm deep at start with 1:200 slope, heavy duty ci grating and frame etc complete 57 constructing stormwater channel with (random rubble masonary) rrm stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking rrm joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing ci frame in rrm and ci grating (heavy duty) etc. complete. (ci grating and frame make: neco or equivalent) 600mm wide channel, 300mm deep at start with 1:200 slope, heavy duty ci grating and frame etc complete 58 constructing stormwater channel with (random rubble masonary) rrm stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking rrm joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing ci frame in rrm and ci grating (heavy duty) etc. complete. (ci grating and frame make: neco or equivalent) 900mm wide channel, 300mm deep at start with 1:200 slope, heavy duty ci grating and frame etc complete 59 constructing stormwater channel with (random rubble masonary) rrm stone masonry in cement mortar 1:5foundation concrete 1:3:6 mix, raking rrm joints and cement grouting as perstandard design including excavation refilling anddisposalof surplus earth, providing and securely fixing ci frame in rrm and ci grating (heavy duty) etc. complete. (ci grating and frame make: neco or equivalent) 1200mm wide channel, 300mm deep at start with 1:200 slope, heavy duty ci grating and frameetc complete 60 supply, installation, testing, and commissioning of the electrical trench, with dimensions of 1300mm length, 1300mm width, and 1300mm depth, which includes a cover at every 15-meter interval, and also includes all necessary civil work to complete the electrical trenchetc complete 61 providing and fixing of ‘seamless gloss’ tiles of himalyan acoustics / baux / baswa or equivalent20mm thick with square edge made of gloss base panel (non-magnisite) with wood fibre 1mm width cement composites covered with acoustically transparent absorptive microfibers on the front side pasted on site with sprayable glue and colour as per the choice of the architect/ person in charge with seamless finish. has excellent noise absorption of 0.85 nrc as per iso: 354-1985 and astm 423-90 a, stc of 47 as per astm e90/413 for 25mm, density 400 kg/ m3, meets stringent fire ratings astm d- 876 and bs:476 , weather resistance as per is 3308, thermal insulation as per is:3346-1980 with relative humidity of 90% rh at 60o celcius(140o farenhite) for 15 days= no deterioration. conforms to en 131682001 and are rohs complaint and anti-bacterial test as per jis-z2801-2010.to be installed on g.i studs 600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life with a backing of 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002 for excellent results( ceiling absorption nrc 0.85) etccomplete. 62 providing fibrette doodle 20 ceiling tiles of himalyan acoustics / baux / baswa or equivalent made of wood fibre cement composites with an option of colours as per the choice of the architect/ person in charge of size 1200 x 600 mm highly recommend for walls / ceilings. has excellent noise absorption of 1 nrc as per iso: 354-1985 and astm 423-90 a, density 400 kg/ m3, meets stringent fire ratings astmd-876 and fire class -1 and class p-not easily ignitable as per bs-476-part 5,6,7, weather resistance as per is 3308, thermal insulation as per is:3346-1980 with relative humidity of 90% rh at 60° celsius (140° fahrenheit) for 15 days= no deterioration. tested as per en 131682001 and are rohs complaint. to be installed on g.i studs 600x600mm centre to centre2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dippedgalvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life witha backing of himalyan acoustics 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002 for excellent results(ceiling absorption nrc 1 ) etc complete 63 providing and fixing of ‘seamless gloss’ tilesof himalyan acoustics / baux / baswa or equivalent wth 20 mm thick with square edge made of gloss base panel (non-magnisite) with wood fibre 1mm width cement composites covered with acoustically transparent absorptive microfibers on the front side pasted on site with sprayable glue and colour as per the choice of the architect/ person in charge with seamless finish. has excellent noise absorption of 0.85 nrc as per iso: 354-1985 and astm 423-90 a, stc of 47 as per astm e90/413 for 25mm, density 400 kg/ m3, meets stringent fire ratings astm d- 876 and bs:476 , weather resistance as per is 3308, thermal insulation as per is:3346-1980 with relative humidity of 90% rh at 60o celcius(140o farenhite) for 15 days= no deterioration. conforms to en 131682001 and are rohs complaint and anti-bacterial test as per jis-z2801-2010.to be installed on g.i studs 600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life with a backing of 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002 for excellent results (ceiling absorption nrc 0.9 )etc complete. 64 providing wooden micro perforated fr grades 600x600 / 600x1200 16mm made of mdf backed with acouscal fleece providing sound absorpon of abs. coeff. 0.92 @125hz as per (equivalent to iso: 354-1985 & astm 423-90).to be installed with hidden aluminium profile conforms to aluminium alloy 6063-t6.temper as per bs:1474-1987. the density per panel is 750-800 kg/m3. these panel are made from acouscal fibreboard with linear perforaons for excellent uniformity. the perpendicular holes areavailable on the panel. wooden micro perforated can be installed on g.i studs 600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life with a backing of 50mm thick,1000 gsm acousc wool tested as per fire retardant astmd 635- 1991/insulation and is 15061-2002 for excellent result wall treatment upto 8ft height etc completeof himalyan acoustics / baux / baswa or equivalent etc complete. 65 providing and fixing ‘aphony cortex’ splendortiles made of wood fibre 1mm widthcement composites 25 mm thick (non magnesite bonded) and covered with acoustically transparent woven fabric on the front side, with an option of colours as per the choice of the architect/ person in charge of size 1200x600/ 600x600 mm.providing sound absorption of 1 nrc as per iso:354-1985 and astm 423-90 a, stc of 49 as per astm e90/413 meets the stringent fire ratings astmd- 876 and bs:476, weather resistant as per is 3308 thermal conditivity result 45 w/m2/kas per is:3346-1980. conforms to en 131682001.to be installed with pvc h profile on g.i studs600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving ithigh strength, hot dipped galvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life with a backing of himalyan acoustics. 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002 thermal conductivity test , w/mk , as per astm c 518 test result ( sc-6490) -0.03312for excellent results.wall absorption nrc 1 etc complete. 66 providing fibrette doodle 25mm walls himalyan acoustics / baux / baswatiles made of wood fibre cement composites with an option of colours as per the choice of the architect/ person in charge of size 1200 x 600 mm highly recommend for walls / ceilings. has excellent noise absorption of 1 nrc as per iso: 354-1985 and astm 423-90 a, density 400 kg/ m3, meets stringent fire ratings astmd-876 and fire class -1 and class p-not easily ignitable as per bs-476-part 5,6,7, weather resistance as per is 3308, thermal insulation as per is:3346-1980 with relative humidity of 90% rh at 60° celsius (140° fahrenheit) for 15 days= no deterioration. tested as per en 131682001 and are rohs complaint. to be installed on g.i studs 600x600mm centre to centre2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dippedgalvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life witha backing of himalyan acoustics 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002 for excellent results wall absorption nrc 1 etc complete. 67 providing and fixing ‘aphony fibril’ tiles20 mm with himalyan acoustics / baux / baswa or equivalenttaper edge made of compressed wood fibre made with (non-magnesite bonded) inorganic compound with mat blackcolour of size 600x1200/600x600mm. has excellent noise absorption of 0.70 nrc as per iso: 354-1985 and astm 423-90 a, stc of 48 as per astm 90/413 density 650-750 kg/ m3, meets stringent fire ratings astm d- 876 and bs:476 , tested as per astm c 367-99 to be installed on g.i studs 600x600mm centre to centre 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving ithigh strength, hot dipped galvanized steel with 120gsm zinc coating specially designed for acoustic vibration management and long life with a backing of himalyan acoustics. 50mm thick,1000 gsm absorb wool tested as per fire retardant astmd 635-1991/insulation and is 15061-2002for excellent results.make etc complete. 68 providingfloor carpet ofhimalyan acoustics / baux / baswa or equivalent with specification : weight :875 dynamic loading ( bs 4052)nominal thickness ( mm): 4.00color fastness tested as per.is 5641wash ( is 11969)light ( is 0686)flammability test ( is 5641) etc complete. 69 providing and fixing of acoustic door ofhimalyan acoustics / topakustik / baswa or equivalent of 56 mm having an stc rating upto 59.6 @ 100 hz as per iso:140/astm90/413. the door will be filled with high acoustic materials of 2 layers of 8 mm water proof acoustic ply with dampner sheet, 2 layers of 10mm thick absorb wool 300 gsm, sound dampner 12mm 1218x1218 mm made of 10 mm compressed wood cement composites 1250kg/m3 and 2mm dampner sheet 37 stc as per iso 140 (part-iii) - 1995. final finish with teak ply 4mm thick interior and exterior side. door frame will be made of teak wood teak wood/ engineered wood. frame on all four sides or three sides frame and drop seal below will be provided along with the door. high load bearing hinges will be provided along. fr tested as per is:3614 (pt. ii) & bs: 476-(pt.20 & 22). 70 providing and fixing of teak wooden flooring of himalyan acoustics / baux / baswa or equivalent of20mm thickness with polish. teak wooden flooring with tongue and groove system with size 510x90x20mm. termite treated seasoned. to be installed on ply board 16mm.floor polish charges included etc complete. 71 supply & installation of auditorium tip-up chairs:seat to be mounted on center pedestal 75mm x 100mm mounted on ms plate 200mm x 200mm x 6mm thickness. seat & contoured back made in cold injection moulded pu foam of density of 60kg/m3 and 46kg/m3 respectively over metal structure.19 0colored cushion (fabric colour to clients choice) with removable seat cover.seat and backrest frames are made out of metal frame structure black powder coated.upholstered back to with multi angle adjustable mechanism upto 30 degrees inclination.counterweight silent/noiseless tip up seat mechanism, seat shall be able to be removed easily for cleaning and maintenance without the need of any tools. solid armrests laminate finished (wooden appearance) seat number in oval acrylic and row number in metal plate, with provision for wiring to put led illumination. strength & durability of seat to comply to en12727: 2016 for level 4 load test.fire resistance to meet bs5852 & bs 7176warranty 5 years. price inclusive of transportation with all leads and lifts etc, complete. 72 statue- balasaheb thakreproviding statue of 15 ft height in 1st quality fiber material with metal armature (jindal). with internal structure pipe 100mm dia pipe welded together with support pipe in between and arm also with the same pipe of size 1mtr-0.5 mtr the overall height would be 3.5mt from ground. item is including installation with all fittings fixture, hardwares , scaffolding, all as per design & drawings & as per instructions from engineer in charge etc. complete on site. material made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. structural stability certificate will be given. 73 sculpture-1 man sitting providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care. 74 sculpture 2 man with hammer sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care. 75 sculpture 3 women standing- sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care 76 sculpture 4 buffalo- sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care. 77 sculpture-5:- man with calf and calf sculpture -providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care. 78 sculpture-6:- man standing sculpture providing & fixing made of frp material as per 3 to 5 ft heights as per design & drawings with combination of 48 mm and 26mm dia pipe and cage work made up of metal path with 20-25 thickness width made of metal support inside and above marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. item is including installation with all fittings fixture, hardwares , all as per design & drawings & as per instructions from engineer in charge etc. complete on site. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5 viscosity aliphatic paint. with long standing life. require maintenance and care. 79 selfie point i love haldi providing & fixing of 2.8m x 2.8 m with height of 2.8m. frp kiosk. made of frp material with dark wood finish. frp dustbin included in the kiosk. made of marine quality composite {marine grade corrosion resistant & hydrocarbon solvent resistant), inner frame made of mild steel pipe is:3601 or equivalent, hot-dip galvanized 60 microns, post fabrication. its reinforced with glass fibre cs 1040 450gsm e glass matt with a density of 450g/m2 & 300gsm emulsion chopped strand matt with a density of 300g/m2. the product is an all weather proof & maintenance free with long design life. its self-coloured textured surface finish with scratch resistant, aliphatic grade u.v. stabilized pu paint with uv stable polyurethane 120 s+/-5viscosity aliphatic paint. with long standing life. item is including placing, installation with all fittings, fixture, hardwares , all as per design, drawings & as per instructions from engineer in charge etc. complete on site.

State Government

TRN :49021481 | 16 May, 2025

Tender Value : 1.00 Crore

Kotdwara - Uttarakhand

Tender for medicine supply work medicine supply work at govt base hospital kotdwara , list/items of medicine , inj. atropine sulphate injection 0.6 mg/m+b14:b4b14:b580 , adrenaline injection 1 mg/ml , amoxicillin and clavulanic acid injection 1.2 gm , amikacin injection 100mg , amikacin injection 500mg , inj anafortane , atracurium injection 10 mg/ml , aminophylline injection 25 mg/ml , inj atracurium 50mg/5ml , artisunate injection 60 mg (combo pack with 1 ml ampoule of 5% sodium bicarbonate injection and 5 ml ampoule of 0.9% sodium chloride injection , acyclovir injection 250 mg , acyclovir injection 500 mg , adenosine injection 6 mg/2ml , amiodarone hydrochloride injection50mg/ml , amrinone injection 5mg/ml , adinosine injection , bupivacaine hydrochloride in dextrose injection 4 ml amp , bupivacaine hydrochloride injection 0.5% 20ml vial , biphasic isophane insulin injection 30/7040 iu/ml , biphasic insuline aspart , biphasic insuline rapid , insuline glargine100 iu/ml , insuline biphasic degludac , inj b complex 2 ml/amp , betamethasone sodium phosphate injection 4 mg/ml , benzathine benzylpenicillin injection 12 lac units , inj butorphanol tartrate 1mg/ml , inj butorphanol tartrate 2mg/ml , cefotaxime injection 250mg , cefotaxime injection 500 mg , carboprost tromethamine injection 0.25mg/ml , calcium gluconate injection 10 ml , inj carboprost 250 mg , inj cefotaxime 1gm , cefoperazone and sulbactum for injection 0.5 g + 0.5 g , cefotaxime injection 250mg , ceftriaxone 1 gm & sulbactum 0.5gm , ceftriaxone injection 1 g , ciprofloxacin injection 200 mg/100 ml , compound ringer’s lactate injection , ceftazidime injection 250 mg , ceftazidime injection 500 mg , ceftazidime injection 1 g , ceftriaxone injection 250 mg , ceftriaxone injection 500 mg , inj clonidine 150mcg/ml , cisplatin injection 10 mg/10 ml , chlorpromazine injection 25 mg/ml , digoxin injection 0.25 mg/ml , dobutamine injection 50 mg/ml , inj dexmedetomidne100 mc/ml , diazepam injection 10 mg/ 2ml , diclofenac sodium injection- for im and iv 25 mg/ml , dexamethasone injection 4 mg/ml , dried factor viii fraction (iv use)250iu , dried factor viii fraction (iv use)500iu , dried factor vii 1 mg , dried factor ix 500 , dextrose injection 10% , dextrose injection 5% , dopamine hydrochloride injection 40 mg/ml , inj doxyphylline 100 mg , dicyclomine hydrochloride injection 10 mg/ml , drotaverine hydrochloride injection 40 mg/2ml , diltizine injection , ethamsylate injection 250 mg/2ml , etoposide injection 100 mg/ 5ml , enoxaparin sodium injection 60 mg , rh-erythropoetin injection 2000iu , rh-erythropoetin injection 4000iu , inj etomidate 10mg/ml , inj etomidate 40mg/ml , essential amino acid injection , esmolol injection , epinephrines injection , filgrastim injection 300mcg/ml , inj fentanyl 50mcg/ml , fentanyl patch 50mcg/hr , frusemide injection 10 mg/ml , fentanyl citrate injection 50 mcg/ml , glucagon injection 1 mg/ml , inj gentamicin 80 mg 2ml , inj gadodimide 0.5mmol/ml , inj gardinal , inj gravidol 5 mg/ml , glycopyrrolate injection 0.2 mg/ml , inj halothane 250 ml , hydrocortisone sod. succinate injection 100 mg base / vial , hydrocortisone sod. acetate injection 200 mg base / vial , human anti d immunoglobulin injection (im use) 300 mcg , hydroxyprogesterone injection 250 mg/ml , inj hyoscine butyl bromide 20mg/ml , heparin sodium injection 5000 iu/ml , haloperidol injection 5 mg/ml , iohexol ( non ionic contrastmedium in sterile aqueous solution)300 mg iodine/ml. , isoxsuprine injection 5 mg/ml , inj isoprenaline 2mg/ml , iron sucrose injection 20 mg/ml , isoflurane , insulin cartage pen with insuuline cartage , insuline cartage 30/70 , insuline soluble injection , ketamine injection 50 mg/ml , lignocaine injection 2% 30 ml vial , lignocaine and adrenaline injection 20mg + 1:1000 , lignocaine and dextrose injection 50mg/ml , lignocaine 4% injection , leviteracetam injection 1000 mg/100 ml-nacl 0.75% , linezolid injection 200 mg/100 ml , labetalol hydrochloride injection 20 mg/4ml , lorazepam injection 2 mg/ml , inj mantoux fluied 5tu/0.1ml , inj metaprolol 5mh/ml , methylcobalamin injection 500 mcg/ml , methylergometrine injection 0.2mg/ml , methyl prednisolone sodium acetate for injection 40mg/ml , methyl prednisolone sodium acetate for injection 80mg/ml , methyl prednisolone sodium succinate for injection 500 mg , magnesium sulphate injection(50% ) 50mg/ml , meropenem injection 500 mg , meropenem injection 1 g , metronidazole injection 500 mg/ 100ml , multiple electrolytes & dextrose injection type i ip (electrolyte p injection ) , multiple electrolytes & dextrose injection type iiiip (electrolyte m injection) , metoclopramide injection 5 mg/ml , mannitol injection20% , inj mephentermine sulphate , midazolam injection 1 mg/ml , inj multie vitamin iv 10ml/amp , morphine sulphate injection 10 mg/ml , methotrexate injection 50 mg/2ml , noradrenaline injection 2 mg/ml , naloxone injection 0.4 mg/ml , neostigmine injection 0.5 mg/ml , inj neurocetam , inj nalbuphine 10mg/ml , inj nikethamide , inj neurocal , n- acetylcystine injection 200 mg/ml , nitroglycerin injection 5 mg/ml , ofloxacin injection 200mg / 100 ml , oxytocin injection 5 iu/ml , ondansetron injection 2 mg/ml , pentazocine injection 30 mg/ml , propofol injection 10 mg/ml , paracetamol injection 150mg , inj polidocanol 3% , pheniramine maleate injection , promethazine injection 25 mg/ml , phenobarbitone injection 200 mg/ml , phenytoin injection 50 mg/ml , piperacillin and tazobactum for injection4 gm + 500 mg , pantoprazole injection 40 mg , inj pilocarpine , pethidine hcl injection 50 mg/ml , paracetamol injection 10mg/ml infusion(100 ml) , pralidoxime chloride injection 25mg/ml , potassium chloride injection 0.15 mg/ml , progesterone injection 200 mg /2ml , phenylephrine injection , inj rupivacaine 0.75% , inj rocuronium 10mg/ml , ranitidine hcl injection 25 mg/2ml amp , rabies vaccine human (cell culture) (intradermal) 2.5 iu (chick embryo) , rabies vaccine human (cell culture) (intradermal) 2.5 iu (vero cell) , inj solubile insuline , streptokinase injection 15 lac units , sodium chloride and dextrose injection 0.9 % + 5 % , sodium chloride injection ns 100 ml , sodium chloride injection ns 500 ml , sodium bicarbonate injection 1.4% 20ml , snake venom anti serum (polyvalent anti snake venom) lyophillized /vial , succinylcholine injection 50 mg/ml , sevoflurane inhalation 250 ml , sodium valproate injection 100 mg/ml , spiromycine 500mg injection , tetanus vaccine (adsorbed) ip 0.5ml amp , tetanus immuno globuline 250iu , theophylline and etofylline injection 50.6mg + 169.4mg , tramadol injection 50 mg/ml , inj tranexamic acid 5ml , inj triancinolone , thiopentone injection 0.5 g , torsemide injection 10 mg/ml , testosterone injection 25 mg/1ml , urokinase injection 5 lac unit , vdrl antigen (with +ve abd -ve control)/rpr slide kit , verapamil injection 2.5 mg/ml , vinblastine injection 1mg/ml , vincristine injection 10mg/10mlml , vancomycin injection 500 mg , inj vitamin b complex , vancomycin injection1 gm , vecuronium bromide for injection (freeze dried) 4 mg/ 10 mg , inj vitamin k 0.5 ml , water for injection ip , inj xylocard 2 % iv , aceclofenac and paracetamol tablets 100 mg + 325 mg , aceclofenac and paracetamol tablets 100 mg + 325 mg + thicolchicoside 4mg , amoxycillin and potassium clavulanate tabs 500mg + 125mg , azithromycin tablets 250 mg , azithromycin tablets 500 mg , albendazole tablets 400 mg , aspirin delayed release tablets (enteric coated) 75 mg , amlodipine tablets 5 mg , atenolol tablets 50 mg , atorvastatin tablets 10 mg , ascorbic acid tablets 500 mg , alprazolam tablets 0.25mg , tab atrovasin 10mg , tab atenolol 50 mg , allopurinol tablets100 mg , azithromycin tablets (dt) 100 mg , acyclovir tablets 200 mg , acyclovir tablets 800 mg , amoxycillin tabs 250mg , amoxycillin tabs 500mg , amiodarone tablets 100 mg , amlodipine 5mg + telmeisartan 40mg , amlodipine and enalapril maleatetablets5 mg +5mg , amlodipine and lisinopril tablets 5 mg+5mg , amlodipine and atenolol tablets 5 mg+50mg , bilastine tablet 20 mg , betahistine tablets 8mg , betahistine tablets 16 mg , betamethasone tablets 0.5 mg , bromocriptine mesylate tablets 1.25 mg , bisacodyl 5 mg , carbamazepine tablet 200 mg , calcium folinate tablets cal. folinate eq. to folinic acid 15 mg , calcium dobesilate 500 mg , carbamazepine tablets 100 mg , carbamazepine tablets 200 mg , calcium & vitamin d3 tablets 500 mg +250 iu , cefixime tablets 100 mg , cefixime tablets 200 mg , cetirizine tablets 10 mg , chlorzoxazone, diclofenac sodium ¶cetamoltablets 250mg+50mg+325 mg , ciprofloxacin tablets 250mg , ciprofloxacin tablets 500mg , tab calcium , tab caleptin 40 mg (verapaml) , clerithromycine 500 mg , chlorpheniramine maleate tablets 4 mg , cetirizine, phenylephrine & paracetamol tablets 5 mg + 10 mg +325 mg , cefpodoxime dispersible tablets 50 mg , cefuroxime tablets 250mg , cefuroxime tablets 500mg , cephalexin tablets (dt) 125 mg , chloroquine phosphate tablets 250mg , clopidogrel tablets 75 mg , clopidogrel and aspirin tablets 75 mg +75 mg , chloridazepoxide tablets 10 mg , chlorpromazine tablets 25mg , diazepam tablets 5 mg , domperidone tablets 10 mg , diclofenac sodium and paracetamol tablets 50 + 325 mg , diclofenac sodium tablets 50 mg , dicyclomine and paracetamol tablets 20mg + 500mg , domperidone tablets 10 mg , tab deflazacort 6 mg , tab diacerin+glucosamine , tab doxyphylline 400 mg , dexamethasone tablets 0.5 mg , diethylcarbamazine tablets 100 mg , diltiazem tablets 30 mg , digoxin tablets 0.25 mg , drotaverine tablets 40 mg , escitalopram tablets 10 mg , tab ecosprine 10 mg , tab ecosprine 75 mg , essential amino acid tablets , etoricoxib tablets 60 mg , etoricoxib tablets 120 mg , enalapril maleate tablets 2.5 mg , enalapril maleate tablets 5 mg , ebastine tablets 10 mg , cap fenofibrate 40 mg , flunarizine tablet 10 mg , formaline tab , tab foresime 5mg , fluconazole tablets 150 mg , frusemide tablets 40 mg , fexofenadine tab 120 mg , ferrous sulphate and folic acid tablets 100 mg + 0.5 mg , ferrous sulphate with folic acid tab.(paediatric) 20 mg + 0.1 mg , folic acid tablets ip 5 mg , tab glimepride 2mg , tab glucosamine sulphate 750 mg, methylsulfonyimethane 250mg,diacerein 50mg , gabapentin cap/tab 100mg , gabapentin cap/tab 300mg , griseofulvin tablets 125 mg , hydrochlorothizide tab 12.5 mg , hydroxychloroquine sulphate tablets200 mg , hydroxyzine tablets 25 mg , haloperidol tablets 1.5mg , haloperidol tablets 5 mg , imipramine tablets 25mg , indomethacin capsules 75 mg , ibuprofen and paracetamol tablets 400mg + 325 mg , ibuprofen tablets 200 mg , ibuprofen tablets 400 mg , ketorolac 10 mg , levodopa and carbidopa tablets 100 mg+ 10 mg , levodopa and carbidopa tablets 250 mg+ 25mg , levofloxacin tablets 250mg , levofloxacin tablets 500mg , losartan tablets 50 mg , lactic acid bacillus tablets 60 million sporse , tab levo cetrizine 10 mg , tab linezolid 600 mg , losartan tablets 25 mg , labetalol tablet 100 mg , losartan potassium & amlodipine tablets 50 mg + 5mg , losartan potassium & hydrochlorothiazide tablets 50 mg +12.5mg , misoprostol tablets 200 mcg , methotrexate tablets 2.5 mg , melphalan tablets 5 mg , mercaptopurine tablets 50 mg , metformin tablets 500 mg , moxifloxacin 400 mg , tab metoprolol 50 mg , mefenamic 500mg +pcm 300mg tablets , mefenamic acid tablets 500 mg , metronidazole tablets 200 mg , metronidazole tablets 400 mg , methyldopa tablets 250 mg , tab montelukast 10mg+levo ctz 5mg , naproxen tablet 500 mg , nifedipine tablets (sustained release) 10 mg , norflox 400 mg tinidazole 600 mg , norfloxacin tablets 400 mg , nitrofurantoin tablets 100 mg , nicotinamide tablets 50 mg , ofloxacin and ornidazole tablets 200 mg + 500 mg , ornidazole tablets 500 mg , ofloxacin tablets 200mg , ofloxacin tablets 400mg , ondansetron md tablets 4 mg , olanzapine tablets 5 mg , tab phenytoin sodium 50 mg , tab phenytoin sodium 100mg , tab phenytoin sodium 300mg , tab pregabalin+ methylcobalimine , prednisolone tablets 5 mg , tab prebiotic + probiotic , paracetamol 500mg , paracetamol 650mg , pantoprazole & domperidone sr capsules 40mg+ 30mg , promethazine tablets 25 mg , phenobarbitone tablets 30 mg , pantoprazole 40mg , pregabalin cap/tab 75mg , prazosin tablets (extended release) 2.5 mg , propranolol tablets 40 mg , risperidone tablets 1mg , risperidone tablets 2 mg , ramipril tab 2.5 mg , ranitidine tablets 150 mg , serratiopeptidase + accelofenac 100 mg , salbutamol tablets 4 mg , serratiopeptidase 10mg , sodium valproate tablets 500 mg , spiromycine 500mg tablet , sertraline tablets 50 mg , theophylline tablets (sr) 400 mg , terbutaline sulphate tablets 2.5 mg , trifluperazine tablets 5 mg , telmisartan tablets 40 mg , tranexamic acid tablets 500 mg , trihexyphenidyl hydrochloride tablets 2mg , telmisartan40 mg + hydrochlorithiazide tablets 12.5 mg , tinidazole tablets 300mg , tinidazole tablets 500mg , tab tramadol +paracetamol , theophylline and etofylline tablets 23mg + 77mg , thyroxine sodium tablets 100 mcg , thyroxine sodium tablets 50 mcg , tripsin+chymotripsin tablet , ursodeoxychloic acid tablet 150 mg , vitamin – b complex tablet nfi (prophylactic) , verapamil tablets 40 mg , vidagliptin 50 mg tablet , warfarin sod. tablets 5 mg , zinc sulphate dispersible tablets 20mg , amoxycillin capsules 250mg , amoxycillin capsules 500mg , cyclosporin capsules 25 mg , cephalexin capsules 250 mg , cephalexin capsules 500 mg , clindamycin capsules 150 mg , clindamycin capsules 300 mg , clomipramine capsules 25 mg , doxycycline capsules 100 mg , danazol capsules 50 mg , cap essential amino acid , cap enzyme , fenofibrate capsules 200 mg , fluoxetine capsules 20 mg , indomethacin capsules 25 mg , itraconazole capsules 100 mg , nifedipine capsules 5 mg , nifedipine capsules 10 mg , oseltamivir30mg capsule , oseltamivir75mg capsule , omeprazole capsules 20 mg , tramadol capsules 50 mg , atropine eye ointment 1% , atropine sulphate ophthalmic solution 1% , brimonidine tartrate and timolol eye drops 0.15% + 0.5% , carboxymethylcellulose sodium lubricant eye drops 0.50% , ciprofloxacin and dexamethasone eardrops 0.3% + 0.1% , ciprofloxacin eye drops 0.30% , ciprofloxacin ophthalmic ointment 0.3% , clotrimazole with beclomethasone drops 1% , clotrimazole with lignocaine ear drops 1% , fluconazole eye drops 0.3% , neomycin, hydrocortisone & polymixin b ear drops , phenylephrine drops 5% , saline nasal solution (drops)0.65% , timolol eye drops 0.50% , tobramycin and dexamethasone ophthalmic suspension 0.30%+0.10% , tobramycin eye drops 0.30% , tobramycin ophthalmic ointment 0.30% , travoprost ophthalmic solution 0.004% , tropicamide eye drops 1% , wax dissolving ear drops:paradichlorobenzene , benzocaine,chlorobutanol , turpentine oil 2% +2.7% + 5% + 15% , xylometazolinenasal drops 0.1% , acyclovir suspension 400 mg/ 5ml , albendazole oral suspension 400 mg/10ml , amoxycillin& clavulanic acid syrup 200 mg + 28.5 mg / 5 ml , amoxycillin oral suspension(dry syrup) 125 mg/5ml , anticold syrup: phenylephrine hcl ,chlorpheniramine maleate, andparacetamol 2.5 mg+ 1 mg+125 mg/5ml , carbamazepine oral suspension 100 mg/5ml , cefixime oral susp (drops) 25 mg/ml , cephalexin oral suspension (cephalexin dry syrup) 125 mg/ 5ml , cetirizine syrup 5 mg/ml , co-trimoxazole oral suspension 40mg + 200mg per 5ml , cough syrup[each 5ml contains chloropheniramine maleate 3mg ammonium chloride130mg, sodium citrate 65 mg, menthol 0.5 mg] , dicyclomine hydrochloride oral solution 10 mg/5ml , ofloxacin+ornidazole suspention/syrup , domperidone suspension 5 mg/ 5ml , ofloxacin+metronidazole suspention/syrup , drop colicid , eye drop prednisolone , eye gatifloxacin , ibuprofen oral suspension 100 mg/5ml , iron and folic acid syrup 100 mg + 0.5 mg per 5 ml , lactulose solution 10gm/15ml , levo cetirizine syrup 2.5mg/5ml , liquid paraffin ip 400 ml , metoclopramide syrup 5 mg/ 5ml , metronidazole & norfloxacin suspension 100 mg+ 100 mg/ 5ml , montelukast 4 mg+ levo ctz 2.5 mg suspension , ofloxacin suspension 50 mg/5ml , ofloxacin & metronidazole suspension , paracetamoldrops 150 mg/ml , paracetamol & mefenamic acid suspension , paracetamolsyrup 125 mg/5ml , phenytoin oral suspension 25 mg/ml , polygelatine 3.5% solution with electrolytes for i.v. infusion , promethazine syrup 5 mg/ 5ml , salbutamol nebuliser solution 5 mg/ml , sodium valproate oral solution 200 mg/5ml , syp disodium hydrogen citrate , syp lactic acid bacillus , syp cefpodxoime , syp gastika , syp ibu+para , syp liquid paraffin 1.25 ml + milk of magnesia 3.75 ml+ sodium picosulphate 3.33 mg , syp pribiotic+probiotic , syp vit d3 , acyclovir cream 5% , beclomethasone, neomycin and clotrimazole cream 0.025% + 0.5% +1% , betamethasone dipropionate cream 0.05% , clobetasol cream 0.05% , clotrimazole cream 2% , dinoprostone cream 0.5 mg , fusidic acid cream 2% , permethrin cream 5% , silver sulphadiazine cream 1% 250 gm , ors (who) , ispaghula-granules,husk powder200 gm , glass ionomer cement (gic) , gum paint (tannic acid,citramide,zinc chloride) , (savlon) chlorhexidine gluconatesolution 5% , light cure composite , silver amlgam , dithranol ointment 0.50% , formaldehyde solution , zinc oxide euganol , glutaraldehyde solution 2% , glycerin 400 ml , hydrogen peroxide solution 6% , lidocaine hydrochloride topical solution 4% , lysol(cresol with soap solution)(cresol 50% + soap 50%) , potassium chloride oral solution 500 mg/5ml , povidone iodine ointment 5% , povidone iodine scrub solution /cleansing solution 7.5%w/v povidone iodine 7.5% , povidone iodine solution 10% , povidone iodine solution 5% , surgical spirit bp 500 ml , beclomethasone inhaler , salbutamol inhaler , budisonide respules , asthalin solution respule , oflaxacin & metronidazole suspension , inj dextrose25% 100 ml , inj mephentermine sulphate 10 ml , fluticasone furoate nasal spray[ spray ]

State Government

TRN :49022392 | 13 May, 2025

Tender Value : 31.44 Lacs

Gangapur - Maharashtra

Tender for providing electrical installation in, premises street light, water pump and fire extinguisher for the newly constructed zilla parishad primary health center (p .h .c)main building (g.f+f.f) [under scheme d.p.c. (general) year 2022-23, 34512595 construction expantion & m/ce & repairs of p.h.c/ phsc) at village,lasur stationtq. gangapurdist. chhatrapati sambhajinagar.= 1 supplying and erecting 25 mm dia. corrugated flexiblepolypropyleneconduit 2 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 3 supplying anderectingpvctrunking (pvc casing-n-capping)ofsize20 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 4 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 5 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize40 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 6 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 7 supplying and erecting green earth wire 1x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 8 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 9 supplying and erecting green earth wire 1x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 10 supplying and erecting mains with 4x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 11 supplying and erecting mains with 2x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 12 supplying and erecting mains with 4x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 13 supplying and erecting green earth wire 1x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 14 supplying and erecting mains with 4x6 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 15 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 16 supplying and erecting pvc insulated pvc round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 17 supplying and erectingceiling rose / batten holder / slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6a. erected on filled polypropylene board or polished double wooden block/ pvc junction box. 18 supplying and erectingmodular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. 19 supplying and erectingmodular type switch 16aduly erected on provided plate and box with wiring connections complete. 20 supplying and erectingmodular type bell-push with indicator 2 modules 6a / 10a, duly erected on provided plate and box with wiring connections complete. 21 supplying and erectingmodular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. 22 supplying and erectingmodular type 3 pin 6 / 16amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 23 supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 24 supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. 25 supplying and erecting pvc surface modular switch box with double mounting plate for 2module duly erected. 26 supplying and erecting pvc surface modular switch box with double mounting plate for 3module duly erected. 27 supplying and erecting pvc surface modular switch box with double mounting plate for 6module duly erected. 28 supplying and erecting pvc surface modular switch box with double mounting plate for 12module duly erected. 29 supplying and erecting 16 / 20 / 25 a starter (modular range) 2 module for ac unit on provided box complete & duly concealed with necessary material and connected. 30 point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 31 point wiring for ceiling fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 32 wiring for plug on board withswitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no: wg-pw/cw 33 supplying and erectingled square / circular max. 11 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1200 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 34 supplying and erectingled square / circular max. 14 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1500 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 35 supplying and erectingled square / circular max. 18 w down lighter/ panel light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50, including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 36 supplying and erectingledpanel light(600mm x 600mm) max. 30 whaving crca powder coated housing,polystyrene diffuser havingsystem lumens output of min. 3600 lumens, min. efficacy of 120 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 37 supplying and erecting anodized aluminium corridor / passage / mirror light led fitting (2 feet) max. 12wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%,thd<10%,p.f. >0.95, operating range of200-270v, surge protection of 2 kv, life class of 50,000 hrs. at l70b50, including driver with end caps on provided pvc block / wooden board with 3 years warranty. 38 supplying & erecting inverter led batten 10w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 39 supplying & erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 40 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block/sunmica block of suitable size. 41 supplying and erecting integrated led street light fitting26 to 30w ip65 & ik08 class having single piece pressure die-cast aluminium housing ,having system lumens output of min. 2600 lumens, min. efficacy of 100 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 42 supplying and erecting integrated led street light fitting 40 to 50w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 4400 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k,thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg-odf/fls2. 43 supplying and erecting integratedled street light fitting 100-110w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 11000 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 44 supplying & erecting integral post top lantern fixtures (mushroom type) suitable for led lamp upto 12 w consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. fg-odf/ptl 45 supplying and erecting street light wall bracket made from 40 mm. dia ‘ g.i. pipe 1.2 m. in total length complete as per specification no. fg-bkt/wb 46 supplying & erecting 3w, 230v integral type led lamp suitable for b-22 / e-27 base.(night lamp) 47 supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. fg-fn/cf 48 supplying and erecting bracket fan 400 mm. sweep a. c. 230 volts 50 cycles 1350 rpm. oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘e’ class insulation. 49 supplying and erecting fresh air cum exhaust fan of light duty 250 v a.c. 50 cycles 300mm. 1400 rpm rust proof body & blades, wire mesh, duly erected, complete. 50 supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fg-fn/exf 51 supplying and erectingenergy saving ceiling fan 230 v a.c. 50 cycles 1200 mm complete erected in position as per specification no. fg-fn/cf 52 supplying and erecting fan hook of 10 mm. m.s. round bar grouted in rcc slab with making the site as original. 53 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. 54 supplying & erecting 22 swg g.i sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no fg-fas/msc 55 supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof abs plastic body, high grade ss inner tank & 3kw heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermalcut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250v, 50hz, a.c. supply with inlet and outlet, with 3 core pvc flexible copper wire leads duly tested and marking sr. no. and date of erection complete. 56 supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). 57 supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater. 58 providing fiber reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. 59 supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3tr to 1.6tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 60 supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7tr to 2.0tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 61 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 12mm complete. 62 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigeranthaving 22swg thickness and inner dia/size 16mm complete. 63 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. ap-wcr/wc 64 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap-wcr/wc 65 supplying and erecting ultra violet storage type water purifier (ro+uv+uf) with softener for safe drinking water consisting of uv germicidal tube of 8w capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230v, single phase a.c. supply with uv fail & filter change indication system .(for tds more than 200) 66 supplying, installing, testing and commissioning of single phase, 230v, 50 hz, 1400 to 1600va digital pure sine waveinverter with backup time of ........ hrs. based on insulated gate bipolar transistor (igbt) technology completeas per specification no.ap-inv 67 supplying and erecting 12v/180ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 68 supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160-270v and output voltage 200-250v rated for 3kva maximum load and with voltmeter, selector switch, 6a/16a flush type 3 pin socket for output and with 3 core copper flexible cord and 3 pin 6/16a plug top with overload & short circuit protection complete. 69 supplying and erecting switch disconnector fuse (sdf) switch 415v, 100a,open execution, four poleac23 a rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to is/iec 60947-3 part-1/3hrc - din type fuse, insulation voltage 1000 vfor enclosing in panel with rotary handle for on / off operation (without hrc fuse) 70 supplying & erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a,powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, on/off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation. 71 supplying, erecting & marking spmcb 0.5a to 5a, c-series with rated short - circuit breaking capacity (icn) 10kain provided distribution board as per specification no. sw-swr/mcb 72 supplying, erecting & marking spmcb 6a to 32a, c-serieswith rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 73 supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 74 supplying, erecting & marking dpmcb 6 a to 32 a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 75 supplying, erecting & marking tpmcb 6a to 32a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 76 supplying, erecting & marking tpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 77 supplying, erectingand marking double pole isolator only switch version of miniature circuit breakerof40awith required wiring connections and lugs etc. in provided distribution board. 78 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 40a in provided distribution board. 79 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 63ain provided distribution board. 80 supplying&erectingtriplepole and neutral distribution board (tpndb), sp/tp mcbs total 4 ways /12 poles, with door, 1.2mm thickness surface/flushmounted, ip 43 protection on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb 81 supplyingand erecting single pole and neutral distributionboard (spndb), with 2 ways for incoming and 6 ways (6 poles) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw-swr/mcbdb 82 supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb /tp mcb/fp mcb/rccb/rcbo complete erected on angle iron/gi frame. 83 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (36 poles) or tp mcb of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 84 providing & erecting 4 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (rate of 3 pole mccb +20% for 4 pole mccb= 5309x20%+5309=6370.80) 85 supplying and erecting cupboard for enclosing switchgears orforany other purposemadefromselected marine plywood planks 19 mm thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with keys in duplicate. cupboard shall be duly grouted with suitable size of iron work in wall at the bottom. (size of cupboard 0.5x1x2+0.5x1x2+1x1x2= 4 sq.mtrs.) 86 supplyinganderectingiron, sheet metal work consisting of crcasheets, varioussectionsofiron,plates, chequeredplates,rods,bars,mspipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 50x50x4mm angle @ 3.4 kgs x 6 mtrs.= 20.40 kgs i,e 20 kgs. 87 supplying and erecting 525 v 3 phase, 50 hz., mpp type capacitor having minimum overcurrent capacity of 1.8 in,peak inrush current capacity 300 inand minimum life 150000 hourskvarbank of all polypropylenecondensers (app)withthestandard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kvarunitsofp.f. correctionforoperationon 3 phase 50 hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and providedwithterminalcoverbox completeerected onprovidediron bracketoronfloordulytestedby licensee.( original p.f=0.8 desired p.f = 0.95 for this multiplying factor is 0.421. so 0.421 x 46.440 = 19.55 i.e 10 kvar x 2= 20 kvar) 88 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 2 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 89 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core50 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al (double run) 90 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 91 supplying & erecting g.i. pipe‘a’ class 50 mmdia.erectedfor enclosingxlpearmouredcable on wall/poleas per specification no. cb-ce 92 supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 93 supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mmoutside dia. double wall corrugatedpipes (dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 94 supplying & erectingcast iron cable indicatorplate buried along with route of cable for pvc / xlpe armoured cableas per specification no. cb-cip 95 supplying & erecting frp box of size 150mm x 125mm x 100 mm, 2.7 mm thickcomplete on pole/wallas per specification no. cb-sb 96 providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm a/f, top 70 mm a/f on provided foundation as per specification no. oh-pl/opl 97 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 98 providing and erecting galvanised 1000mm double arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 99 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. ea-ep 100 providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. ea-ep 101 providingpipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea-ep 102 supplying and erecting gi strip of required size used for earthing on wall and/or any other purpose with necessary gi clampsfixed on wall painted with insulating and non-corrosive bond with requiredjointsas per specification no. ea-ep.(25x3mm strip. perpole 1.5 mtrs. so for 13 poles 13nos.x1.5mtrs.= 19.5 mtrs. weight of strip @0.590kgs/mtr. so 19.50mtrs.x0.590kgs.=11.51 kgs.) 103 supplying and erecting minimum three & above star rated 1 phase, 230 v, 50 hz, submersible pump set of 1.5 kw/2hp suitable for erection on open well, pump having delivery head from 29to 7 m and discharge from 30 to 600 litres. . per minute& pipe of suction 50 mm/delivery 50 mm diameter erected with necessary h type clamps as per specification no. wp-osp 104 supplying & erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 105 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. 106 supplying & erecting carbon dioxide (co2) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts routed in wall complete. 107 making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (02x02x02 foundation for main control panel stand and for street light control panel 0.2x0.2x0.2mtr.=0.16 cu.mtrs.) 108 makingm- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical gi pole). 109 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw-plb/gp. 110 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete. 111 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. 112 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. 113 lum sump provision towards service connection charges1 no.3 phase @ rs. 55000/-/per total rs.55,000/-

State Government

TRN :49027866 | 22 May, 2025

Tender Value : 0

Almora - Uttarakhand

Tender for tender for project implementation (piu) almora unit area development of artola junction entry gate & feature wall at jageshwar dham in district almora

Central Government/Public Sector

TRN :49029344 | 14 May, 2025

Tender Value : 0

Gorakhpur - Uttar Pradesh

Tender for auction sale of scrap includes electrical accessories such as light fittings with frames, berth reading light fittings, fl fittings, tube lights, piano switches, button holders, fl chokes, fan regulators, electronic ballasts, emergency light units (without batteries), broken solar plates, capacitors, electronic regulators, various types of mccbs, lccbs and their boxes, led tube lights, d.p. switches, train light fittings, connectors, and more. these items may have negligible (nf) attachments and come in various types and sizes. the lot may also contain other similar, known or unknown electrical components.conditions: (1) the lot will be sold on an as-is, where-is basis, and the provided weight is only an estimate. (2) no claims regarding the quality, quantity, or condition of the material will be entertained after the sale.location: - front of bin no. 02 ? 04, scrap yard area ? a,lbpl, dbaw, gst-18%, tcs -1% , hsn code-72044900 , allocation-20714208

Boards / Undertakings / PSU

TRN :48996540 | 13 May, 2025

Tender Value : 1.47 Crore

Matunga - Maharashtra

Tender for repair, renovation, and reconfiguration of lab 1 at the computer engineering and it engineering department, first floor, vjti, matunga, mumbai.= 1 dismantling of existing partitions, wall paneling, etc., all complete as per site requirements, and stacking the usable materials within building premises as directed by the architect/consultant/ engineer-in- charge, etc. complete. (lead upto 100 meters) 2 removal of cement tiles, existing flooring, wall tiles,marble, polished shahabad flooring, dado with or without bed concrete, including stacking the materials as directed, with all leads, lifts, etc., complete. (lead upto 100 meters) 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. ( lead upto 100 meters) 4 scraping the old paint from the plastered internal surface using a dust-free vacuum paint scraper, followed by coating the entire surface with a mixture of whiting or glue and linseed oil, including the provision of scaffolding, as directed. (the scraping of old paint should be done until the neeru finish of the plaster is achieved.) lead and lift upto 100 meters etc. complete. 5 removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. 6 removing the existing cement plaster of any thickness without causing dust nuisance, stacking the debris up to a distance of 100 meters, cleaning the site, etc. complete. 7 providing and applying an anti-corrosive chemical to exposed reinforcement of r.c.c. members such as beams, columns, and slabs. this includes one coat of alkaline rust converter (feovert, rusticide, or equivalent) after cleaning the surface with a wire brush, followed by two coats of anti-corrosive, epoxy-based, two-component, zinc-rich primer (materemaco p 130 of basf, phenolic ipnet rb, polyalk flxoprime, or equivalent) for rebar protection on exposed reinforcement. additionally, apply a concrete-penetrating corrosive inhibitor (epco kp-100, polalk ep 113, masterseal 1414 of basf, fosroc, or equivalent) over the adjoining concrete surface. etc. complete. 8 providing and applying a bond coat of approved epoxy resin (masterbrace 1414 of basf, epi bond of krishna conchem, or equivalent) before polymer plaster or concrete to ensure a perfect bond between old concrete and new concrete/polymer plaster surfaces. the bond coat should be applied within half an hour after preparation, conforming to astm c881 type 2. this process includes the use of nylon brushes, scaffolding, labor, etc. complete. 9 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 15mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 10 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 30mm-50mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 11 providing and applying a 30mm thick self-curing ceramic polymer microconcrete of an approved make, having a compressive strength above m30, non-shrink, and impermeable, as a filling mortar for load-carrying r.c.c. members in two layers on cleaned concrete surfaces, including honeycomb areas (using manual or mechanical means). the mortar shall be prepared by mixing nicosil c80 and fresh 53-grade cement with the required water-cement ratio to achieve the desired consistency. the application and finishing shall be done by manual trowelling. curing shall be carried out after the initial setting time, in accordance with the manufacturers specifications. the work shall be executed in line with the specifications and as directed by the engineer-in-charge. the work must be carried out by a certified applicator, and the work shall be guaranteed for 5 years. the guarantee shall be provided on a rs. 500/- stamp paper. (the bond coat, as per item no. 08 in the boq, is to be applied before the coating.) 12 providing and applying 12mm thick internal/external ready-mix plaster conforming to is: 4031 (part-4) 1988 and is: 383-1970, in a single coat using cement mortar in a proportion of 1:4, with a special type of polymer additive (approximately 0.4%), on all types of surfaces in all positions, including scaffolding and curing. the plaster shall be followed by a smooth finishing coat of gypsum plaster of 6mm thickness, ensuring an even, smooth surface suitable for painting. complete with necessary curing, scaffolding, and all other related works. 13 providing and applying a priming coat over new/old steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter. the surface shall be scoured with wire brushes, fine steel wool, scrapers, and sandpaper, with scaffolding as required, etc. complete. 14 providing and applying priming coat over new wood and wood-based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter, sanding, knotting, scaffolding, etc., complete. (brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 15 providing and applying two coats of synthetic enamel paint of approved color to new/old structural steel work and woodwork in buildings, including scaffolding if necessary, cleaning, and preparing the surface (excluding primer coat). etc. complete.(brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 16 removing and refixingof doors and windows with frames and stacking the materials as directed, including all leads, lifts, labour, fitting etc., complete. (lead up to 100 meters) 17 providing and laying in pattern 600 mm x 600 mm vitrified tile flooring of 8 to 10 mm thickness and confirming to is 15622-2006 ( group bla) of approved make,quality, shade and pattern for flooring . the tile flooring shall be laid in pattern with 2 mm spacers & tiles fixed in cement mortar of 1:4. the rate shall be including floor chipping to attaining required levels, epoxy grouting of joints using approved matching colour tile grout of epoxy grout, necessary protection of the laid floor, acid wash cleaning for any stains before handover. etc. complete as per the drawing, specification and to complete satisfaction of the engineer. rate to include the wastages as per the pattern indicated in the layouts. brands like kajaria, johnson or similar etc. groove shall be filled with grout of approved shade ( brands like laticrete etc.) as dicectedby the engineer-in-charge. etc. complete. basic rate for tile material- rs. 1440/- per sq.m. 18 providing and fixing skirting, including labor, materials, and all related work, etc., complete. rate for skirting of height up to 150 mm. 19 vinyl flooring for hod cabin:providing and fixing approved color homogeneous flooring, 4mm thick with interlocking system, single-layered flexible spc vinyl flooring (spica by tusker vinyl floorings) in roll form, over the provided i.p.s. or kota stone flooring. the flooring will be fixed using approved adhesive, and all joints will be soldered with pvc rods as per the manufacturer’s specifications. the work will be completed as directed, ensuring proper leveling and cleaning. the roll width will be a minimum of 2.0 meters, and the weight of the pvc flooring will be 90 kg per 30 sqm. as directed and approved by engineer in charge. etc complete. basic rate for vinayl flooring material- rs. 900/- per sq.m. 20 providing and laying vitrified mirror/glossy/matte finish tiles of size 590 mm to 605 mm x 590 mm to 605 mm with a thickness of 8 to 10 mm, conforming to is 15622:2006 (group b1a) from an approved make, shade, and pattern, for dado and skirting in the required positions. the tiles shall be fixed in 1:4 cement mortar, including neat cement float, filling of joints, curing, cleaning, and all related work, etc., complete. basic rate for tile material- rs. 790/- per sq.m. 21 providing second-class burnt brick masonry with conventional/i.s. type bricks in cement mortar 1:6 in the superstructure, including striking joints, raking out joints, watering, scaffolding, and all related work, etc., complete. 22 lowering the debris obtained from breaking and removing cement plaster/burnt brick masonry from the first floor by any means, without causing dust nuisance or damage to the structure. the debris shall be stacked as directed by the engineer-in-charge, including cleaning the site, etc., complete. (lead up to 100 meters.) 23 removing and disposing of debris from the site to a dumping ground outside the vjti premises (in accordance with municipal rules), etc. complete. as directed by the engineer-in-charge. (minimum 6 cu.m debris per trip) 24 providing anti-termite treatment to the wooden frames of doors and windows of the existing building as per i.s. 6313 (part-iii), by drilling 6 mm dia. holes at the four corners on one side and the four corners on the other side, at a downward angle of approximately 45 degrees at the junction of the woodwork and masonry. injecting 150 ml of chlorodane 5% w.c. into each hole and sealing with putty, etc., complete, with a 2-year guarantee on bond paper. 25 providing and applying waterproof melamine polish of the required finish to the woodwork by spray machine, including knotting and preparing an even surface by scraping, applying french polish, scaffolding if required, etc., complete.note: the work is to be executed only with prior approval from the superintending engineer. (brands such as asian paints, mrf melamine or equivalent.) etc. complete. 26 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 8 mm to 12 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 27 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 16 mm to 32 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 28 providing and fixing sign boards foor doors:specification for waterproof signage boards (12 x 4 inch)size: 12 inches (l) x 4 inches (h) (with size tolerance is plus or minus 1%)material: high-quality, durable acrylic or pvc boardfinish: glossy or matte finish for clear readabilitywaterproof: weather-resistant, suitable for both indoor and outdoor usedesign: custom text, graphics, or logo engraving/printingmounting: wall-mountable with adhesive backing or screw mountscolors: available in multiple colors with contrast for visibility (e.g., white, black, silver)application: ideal for office cabins, rooms, labs, and other signage needsthis durable, waterproof signboard ensures clear and professional signage in various environments. including wastage, etc. complete. basic rate for material- rs. 460/- per number. 29 providing and fixing of 3d wall panels that can be painted as well.size of each panel: 2 x 2 feet.colour: any color, design, or pattern.features: lightweight, fire-resistant, easily diy, 100% recycled.made from natural bamboo plant fiber, etc., complete. basic rate for material- rs. 450/- per number. 30 providing and fixing wooden decorative fluted wall panels/louvered wall panels:material: high-quality wood (mdf, plywood, or hardwood) with a decorative veneer finish.dimensions: 8 feet x 4-5 inchesthickness: 8 mm - 12 mmdesign: fluted design with vertical or horizontal grooves for a decorative effect.color: multicolor/any colour. (customizable to match interior themes).shape: rectangular panels for seamless installation, etc., complete. basic rate for material- rs. 850/- per number. 31 providing and fixing machine cut mirror polished 16 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone partition with rounding the edges etc. complete. one side polishbasic rate for granite material- rs. 2530/- per sq.m. 32 providing and fixing oval-type under-counter wash hand basin of 16-inch x 22-inch size and of special color shade, having telephonic black/colored granite of 180mm thick stone black kadappa framework, including chromium-plated coupling bottle trap. the wash basin should be of cera company or equivalent, model no. 3448, as per the detailed drawing or as directed by the engineer-in-charge, etc., complete. (counter size 1.20m x 0.60m). (brands such as jaquar,kohler or equivalent make.) basic rate for wash basin - rs. 6000/- per number. 33 providing and constructing a granite kitchen platform with the installation of a stainless steel sink (600mm x 450mm) as per the detailed drawing, including vertical polished kadappa stone supports (25 to 30mm thick) on both sides, with a kadappa top (35 to 40mm thick) and a polished granite top (16 to 20mm thick). the platform will feature granite strips at the front and both sides, with two vertical granite supports (15 cm height). the top granite will be 75 cm x 40 cm, including cutting and opening for the sink of the required size in both kadappa and granite. the platform size is 5.00 m x 0.60 m, with a height of 0.75 m, etc. complete with all required finishing. basic rate for ss sink- rs. 6000/- per number. 34 supply and installation of 600x600mm modular metal perforated grid ceiling system (cg-01)the ceiling system shall be supplied and installed as per the specifications provided in the tender document, and in accordance with the directions and approval of the engineer-in-charge. the scope includes complete installation with all necessary materials, components, and finishing to ensure proper execution etc. complete. 35 providing and installation of aluminum frame works for partition with ply on both sides and laminate finish: providing and fixing partition aluminum frame work consist of 25mm x 50mm x 1.2mm thick extruded aluminium box section framework at spacing not exceeding 600mm centre to centre both ways (horizontal and vertical). the framework shall be secured at floor structural ceiling and sill/ lintel level with 25 x 50mm x 1.2mm thick horizontal aluminium section. framework to be secured to floor / walls / columns / ceiling / beams using 75mm metal screws and dowels.acoustic infill: providing & fixing acoustic insulation of approved make to g.i./ aluminum/ ms/ wooden frame partition of 50mm thick rockwool of density 48 kg/m with blanket wrapped in rp tissue suitably affixed to partition framework using where necessary gi binding wire duct tape as indicated in the drawing.outer skin:- providing and fixing 18mm plywood of brands like greenply, century or equivalent. finished with 1 mm thick laminate of approved shade applied on plywood of brands like formice, royal touche or equivalent brand.note: rate is as per aluminum framework with both side ply and laminate. etc. complete. 36 providing and fixing of laminate cladding with ply backing:providing and fixing 12mm bwr plywood (brand: greenply, century, or equivalent), directly fixed to the column. a 1mm thickness laminate of an approved shade, applied on the plywood surface. laminate brands: formica, royal touche, or equivalent. etc complete. 37 providing and installation of glass partition (toughened glass): providing 12mm toughened fixed glass partition including all patch fittings, ensuring smooth and even flush joints between glasses, fixing the same in positions to true line and level, finishing the wall joints with clear silicon sealants, cleaning the surface and ensuring that there are no scratch marks on the glass etc. complete as per drawing and specifications, glass brands should be dorma, ozone or equivalent. 38 providing and installation of glass partition (dgu glass): double-glazed unit glass with air spacer of 6 to 16mm, 95% transparency, etc. complete as per drawing and specifications, dorma or ozone or equivalent. 39 providing and installation of 12mm thick clear toughened glass door with film as required. (d2 - 0.91 x 2.10 m) specification:hardware: door to be complete with hardware to each leaf as follows: hinges: 8 nos. ss ball bearing butt hinges. door closer: concealed door closer with hold open. lock set: dead lock as approved.door handles:900mm ht. 36mm dia d type offset handle on both sides in approved powder coating. door stop: floor mounted door stopper as approved seals: drop down floor seal as approved. security system: na note: all the metal profile sections and hardware finish should match the frame. brands like dorma or ozone or equivalent. etc. complete as per drawing and specifications. 40 providing and installation of d1 - double door two-way sliding motorized door, suitable for door openings up to 1.20 meters with a maximum door weight of 100kg (both leaves). the door offers environmental protection with a working temperature range of -20°c to +50°c and is rainproof. it has a standard opening time of 3-8 seconds, with a remote control operating distance of 100 to 200 feet (depending on line of sight). the opening size is 2.4m x 2.10m, and the glass door size is 1.2m x 2.10m. brands like dorma, ozone, or equivalent, to be installed as per drawing and specifications. etc. complete. 41 providing and installation of d3 - 1.09m x 2.10m (single shutter) 12mm toughened glass door with fixed side panels, including all patch fittings, locking mechanisms, and ensuring smooth, even flush joints between the glass panels. the door is to be fixed in position to true line and level, with wall joints finished using clear silicone sealant. the surface should be cleaned and inspected to ensure there are no scratch marks on the glass. installation to be completed as per drawing and specifications, with brands like dorma, ozone, or equivalent. etc. complete. 42 pop punning: providing and applying of plaster of paris punning(1st quality isi approved pop) over plastered with minimum thickness of 8mm-12mm to existingwall surfaces, ceilings & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. rate to be inclusive of edge protection (gi), fibre mesh for service conduits,hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architects/consultant/engineer-in-charges approval. brands like gyproc, armstrong, shera or equivalent etc. complete. 43 plastic emulsion paint (leed compliant, low voc): providing and applying plastic emulsion paint finish to walls, partitions, and ceiling surfaces of approved make, color, texture, and shade in two coats, with surface and finish acceptable to the engineer in charge to be achieved within these two coats. any additional coats, if required, shall be at the contractors cost. the work includes preparing existing surfaces by scraping away loose particles, dust, etc., washing and scrubbing, filling cracks with crack filler and binder, cleaning and making the surface dust-free, applying water-based rj london putty as directed, rubbing with sandpaper to smooth the surface, and applying one coat of primer as recommended by the approved paint manufacturer. the work also includes providing necessary scaffolding, cleaning, and protecting the site until handover, as well as masking and protecting all service devices such as switchboards, detectors, etc. the work is to be completed at all heights and leads, as per specifications or as directed by the architect/engineer in charge/consultant. brands like asian paints, berger, or equivalent are acceptable. etc. complete. 44 providing and applying premium decorative wallpaper high-end or custom designs (special finishes, custom patterns)specifications: material: non-woven fabric or vinylroll size: 21 inches wide x 33 feet long (covers 55 sq ft)pattern: various styles (floral, geometric, etc.)finish: matte, gloss, or texturedinstallation: peel & stick or pastefeatures:scratch & water-resistanteasy to clean (wipeable)fade-resistanteco-friendly, voc-freeideal for: living rooms, offices, and accent wallsmaintenance: clean with a damp cloth, no harsh chemicalscustom options: available in various colors and patterns, custom designs upon request. basic rate for wallpaper rs. 600/- per sqm. 45 standing platform (300-450 mm from ffl):construction of a standing platform at a height of 300 mm to 450 mm from the finished floor level (ffl), as per approved dimensions. the platform will be made of 18 mm thick wood (century, greenlam, or equivalent) and finished with wood polish (asian paint wood tec, mrf, or equivalent).materials:frame: mild steel or aluminum, powder-coated for corrosion resistance.surface: high-quality plywood, mdf, or approved materials with a non-slip finish.support: sturdy metal beams or supports for stability.features:height: 300 mm to 450 mm from ffl, as per design.finish: non-slip surface with smooth edges and protective coating.safety: non-slip tread and optional guardrails. etc. complete. 46 stage flooring: supply and installation of interlocking rubber tile flooring at the stage area as per the specifications and drawings provided. the flooring will consist of a 6.0 mm synthetic sport surface, including a =1.50 mm pur protect® treated vinyl surface layer, calendared and grained, supported by a pvc density single closed-cell foam, and reinforced with a fiberglass grid structure. it will feature sanosol treatment for fungistatic and bacteriostatic properties. the flooring will meet the following standards: weight: 3.7 kg/m², impact resistance (en 1517) =8 n/m, abrasion resistance (en iso 5470-1) =350 mg, shock absorption (en14808) =25% (labosport result = 28%), indentation resistance (en 1516) =0.5 mm, ball bounce (en 12235) =90%, vertical deformation (en 14809) =3.5 mm, sliding coefficient (en 13036-4) 80–110, fire (en 13501-1) cfl-s1, anti-viral activity (human coronavirus 229e) – iso 21702 (99.37% after 2 hours), energy return (nf p 90 203) =0.31 m/s, tvoc after 28 days <100 micrograms/m³ (iso 16000-6), floor score®, ce marking, en14904 compliant for multi-sports use, reach compliant, and singapore green label certified. the supply and installation will include making good any damaged surfaces using standard fillers such as birla white cement, cement-based grout, epoxy grout, or mortar, and repainting to match the color.all work will be completed in accordance with the specifications, design, drawings, and the direction of the engineer-in-charge. 47 providing and fixing of overhead storage as per the specifications and drawings provided in the tender document. etc. complete. 48 providing and fixing of surface storageas per the specifications and drawings provided in the tender document. etc. complete. 49 providing and fixing on-site a lab table as per the specifications and drawings provided in the tender document. etc. complete. 50 providing and fixing of office desk/table in faculty lounge as per the specifications and drawings provided in the tender document. etc. complete. 51 providing and fixing of office desk/table in office for hod as per the specifications and drawings provided in the tender document. etc. complete. 52 supply and installation ofhod cabin chair as per the specifications and drawings provided in the tender document. etc. complete. 53 supply and installation of faculty lounge chairs as per the specifications and drawings provided in the tender document. etc. complete. 54 supply and installation of study chairs for labs as per the specifications and drawings provided in the tender document. etc. complete. 55 supply and installation of foldable desklet tables for the seminar hall as per the specifications and drawings provided in the tender document. etc. complete. 56 removingthe exisitng light fixures, fans, wires, cables, swith boards and distribution boards etc. complete. 57 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 1.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 58 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 2.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 59 supplying and erecting flush type shockproof plug socket 6a & 16a (6 pin) with 16a / 25a switch combined with indicator lamp and fuse with gang box on wooden board.make /brand (roma/ legrand,/ greatwhite) etc. complete 60 supplying and erecting isi mark modular type 3 pin 6a / 16a multi socket with safety shutter, duly erected on providedplate and box with wiring connectionsetc.complete. brand : roma/gretwhite/legrand) etc. complete 61 supplying and erecting pvc surface modular double mounting plate 3 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) 62 supplying and erecting pvc surface modular double mounting plate 4 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 63 supplying and erecting pvc surface modular double mounting plate 6 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 64 supplying and erecting pvc surface modular double mounting plate 8 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 65 supplying and erecting pvc surface modular double mounting plate 12 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 66 supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. fg-fn/cf brand /orient/polycab/crompton etc. complete 67 supplying and erecting flush-type ceiling fan regulators and electronic step regulators for ceiling fans (600mm, 900mm, 1200mm, and 1400mm sweep), complete with installation on the provided switchboard. make/brand: roma, legrand, or greatwhite. 68 providing and fixing 36 watt 2x2 light fitingsupplying and erecting square shaped crca /die-cast aluminium powder coated housing led panel light (slim edge-lit) 600x600mm suitable for 36 w-40w includingmotion sensor led light with provision for plane front frame with translucent cover fixed to the housing etc.complete .brand philips/havels/wipro etc. complete 69 supplying and erecting 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 70 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (24 poles) or tp mcb of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 71 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/tripalarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 72 supplying, erecting & commissioning 4 pole rccb 63a, electromagnetic type with 30/100/300 ma sensitivity with earth leakage trip indication complete as per specification no. sw-rccb/rccb. (make/ brand: legrand/ schneider/ l&t/ indo asian) 73 supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s/ws 113c laid in provided pvc casing capping/conduit as per specification no. wg-tw etc. complete. cables brands should be polycab/finolex/havells. etc. complete 74 supplying and installing cat-6 cable suitable for networking as per specification no. wg-coc/nc. cables brands should be polycab/finolex/havells. etc. complete. 75 supplying & erecting mains with 2 x 2.5 sq.mm. and earth wire 1.5 sq.mm frlsh pvc copper wire in hms pvc conduit min. 20mm dia. as per specification no: wg-ma/pc.etc complete. brand :polycab/finolex/havels) etc. complete 76 supplying, erecting & terminating xlpe armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.cb-lt/cu(brand: polycab/ finolex/ havells)note - the quantity of wires for looping the required number of air conditioning units has to be calculated by the contractor with respect to the provided architectural working drawing. etc. complete 77 providing & erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) gi sheet of 150 mm width & 20 mm height complete with necessary hardware. cable tray brands should be profab or equivalent. etc. complete 78 supplying and erecting pvc box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification no: wg-ma/box. etc. complete (make/ brand: legrand/ schneider/ l&t) 79 supply & fixing of aluminum box section to be laid on the floor with all excavation, re-cementing & refinishing civil works to make good in line with the existing floor level respective junctionbox to be fabricated in 16 swg gi sheet with cut out as required for terminating the box sections. shall include pvc conduits from jb to work station powerpoints i)150 x 150x 50 mmgijunction box with cover & cut outs etc. complete. (make/ brand: legrand/ schneider/ l&t) 80 supply of a.c split unit (2 ton) :supply of ac split unit as per the specifications, and drawings provided in tender document. make (carrier/ voltas/ bluestar/ samsung) etc. complete 81 supply of 2 ton casatte ac:2 ton inverter casette ac. cooling capacity 3200-8000 watt. offers uniform 360 degree round airflow, with 4 star energy rating. etc. complete. make (carrier/ voltas/ bluestar/ samsung) etc. complete 82 installation of 2 ton ac split unit etc. complete 83 installation of 2 ton ac cassette unit etc. complete 84 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 22mm complete. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 85 supply & installation electrical communication cable between indoor to outdoor units.cables brands should be polycab/finolex/havells. etc. complete. 86 providing and fixing in position ms frame stand for a.c. units, floor or wall mounted, with vibration isolation pads and frame to be made out of required ms sections strong enough to hold the weight of the ac unit,and should be lockable, including fixing in position using necessary scaffolding, ladder etc, and painting with two or more coats ofapproved enamel paint on a coat of red oxide etc. complete 87 insulated condensate water drain piping constructed out of pvc / hdpe hard pipeswith 6mm thick nitride insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors fasteners and concealed in brickwork or flooring. etc. complete(make: finolex/ astral/ prince) 88 supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided pc / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/ac system. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 89 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plug top with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. etc. complete 90 carrying out core cutting of size 3 to 5 dia x 15 length in the c.c./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. etc. complete 91 supply and installation of roller blindsas per the specifications and drawings provided in the tender document. etc. complete. basic cost for blind cloth fabric material rs.900/- per sq.m. 92 carrying out test for ceramic tiles / vitrified tileswater absorption, modulus of rupture (set of 6 tiles) etc. complete. 93 carrying out test for plywood: determination of resistance to dry heat,determination of moisture content,determination of density,thickness of plywood. etc. complete. 94 carrying out test for test for glue adhesion for plywood etc. complete. 95 carrying out test for hollow / solid /aac blocksdensity test. (set of 3 blocks), compressive strength. (set of 3 blocks), water absorption test (set of 3 blocks) etc. complete. 96 providing and fixing 15 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 97 providing and fixing 20 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 98 providing and fixing 25 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 99 providing and fixing on walls/ceiling/floor 32mm dia cpvc pipe with necessary fittings, remaking good the demolished portion, etc., complete. including removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 100 providing and fixing 75 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. 101 providing and fixing 100 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 102 providing and fixing 10 cm pvc nahani trap with grating, etc., complete. (brands such as astral, finolex, prince or equivalent make.) basic rate for nahani trap is rs. 380/- 103 providing and fixing c.p. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. basic rate for pillar cock is rs. 1250/- per number 104 providing and fixing of exhaust fan 150mm crompton/havels/usha or equivalent etc. complete. basic rate for exhasut fan is rs.1000/- per number 105 providing and fixing stainless steel round napkin hanger for bathroom/towel holder for wash basin/napkin holder/bathroom (chrome) b. heavymaterial stainless steel product dimensions 17l x 5w x 19h centimetersfinish type chromeinstallation type wall-mounted shape round including fitting etc. completed.basic rate for material is rs. 320/- 106 providing and fixing premium front glass shelf - bathroom shelf/kitchen shelves wall mounted with frosted and toughen (tradition 6 x 18) chrome including fitting etc. complete. basic rate for material is rs. 650/- 107 providing and installation of 6 mm thick mirror with 6 mm thick ply backing, as per design. the mirror will be supported by stainless steel finished buttons, etc., complete. (the glass brand should be saint-gobain, borosil, or an equivalent make) basic rate for mirror is rs. 1250/- per sq.m. 108 supply and installation of nsd make smoke detectormodel:66a, certification: ce & ertl etc. complete. 109 supply and installation of nsd make heat detectormodel:66h, certification: ce & ertl etc. complete. 110 supply and installation of response indicator make: nsdmodel: p.s (mini) etc. complete. 111 supply and installation of manual call point (m.s) make nsd 112 supply and installation of 08 zone fire alarm panel make nsd(excel) etc. complete. 113 supply and installation of flasher hooter make nsdmodel no: ms17flash etc. complete. 114 supply and installation of supply & laying 1.0 sq. mm x 2 core copper armored isi cable for alarmsystem. with accessories per meter. brand/make :polycab/finolex/havellls) etc. complete. 115 supply and installation of high quality co2 fire extinguisher (6 kg)type:carbon dioxide (co2) fire extinguisher (for electrical fires and flammable liquids)capacity: 6 kgfire rating: class b (flammable liquids) class c (electrical fires)material: cylinder: steel or aluminum alloyfinish: red powder-coated for durabilityoperating pressure: 55 bardischarge time: approx. 8-10 secondsdischarge range: 3-5 feettemperature range:operating: -10°c to +60°c storage: -30°c to +60°cmounting: includes wall bracket certification: is 15683 (india) / ul/ce certified etc. complete.note: the rates for all fire safety alarm items include the complete supply, installation, commissioning, transportation, freight, and all associated costs. 116 providing architectural/ interior design services : scope of work as below:drawings preparation: 3d views, floor plans, furniture layout, electrical layout, ceiling layout, and partition layout.color scheme & material selection: guidance on colors and material choices for finishes, flooring, and furniture.quality control: ensure standards for structural, civil, electrical, fire safety, furniture work and hvac work.interior planning: optimize lab functionality and aesthetics, including furniture, partition design, and system planning (electrical, hvac, fire safety).modifications: suggest changes to designs based on site conditions and client feedback.coordination & monitoring: ensure project progress and timely completion by working closely with contractors. deputation of interior designer degree/diploma/certificate course having knowledge of autocad and 3d home or equivalent for the full period of the work. designes. monitor on-site execution, ensuring design adherence. taking joint measurements.preparing statements for extra items and excess quantities.compliance & safety: ensure adherence to safety codes and regulations. etc. complete.

Central Government/Public Sector

TRN :34416469 | 14 May, 2025

Tender Value : 0

Vasco Da Gama - Goa

Tender for gem bids for custom bid for services - revamping of simulator building main entrance comprising installation of panels and unit name board mig 29 k simulator ins hansa

Related Searched Keywords : ent unit

List of ent-unit Tenders

Tender for tender for project implementation (piu) almora unit area development of artola junction entry gate & feature wall at jageshwar dham in district almora

Tender for gem bids for custom bid for services - revamping of simulator building main entrance comprising installation of panels and unit name board mig 29 k simulator ins hansa

Get ent unit Tender Alert...

Related Searched Keywords : ent unit

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us