Filters

List of soft-wood Tenders

List of latest soft-wood Tenders in Indian Tenders. Click on any soft-wood Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for soft-wood Tenders.

All-Tenders (19)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35953246 | 12 Dec, 2025

Tender Value : 0

Nainital - Uttaranchal

Tender for gem bids for paint grey 4 ltr pack, paint white 4 ltr pack, paintred 4 ltr pack, paint green ltr pack, paint black 4ltr pack, neel 900gm robin, oil bond distemper 5kg, papco kg pop, tarpin oil, brush double bar 3 to 6inch each, fevicol, wood cutting electric machine, randha wood electric machine, tree cutter, grass cutterbrush cutter oil varient, traditional straw coconut broom, soft bristle grass broom

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

Central Government/Public Sector

TRN :35942667 | 12 Dec, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for wedge soft wood 100x 25x25 mm thick n5110-000526, wedge soft wood 125x 50x25 mm thickn5110-000527, wedge soft wood 150x 75x25 mmthick n5110-000528, wedge soft wood 250x 90x50mm thick n5110-000529, plug round tapered softwood 200x 100x75 mm n5510-001243, plug roundtapered soft wood 300x 150x100 mm n5510-001244, plug sq tapered soft wood 75mmx 25mm x 12mmn5510-001245, plug squared tapered soft wood75x 25 x 18mm n5510-001248, plug squared taperedsoft wood 100x 38 x 25mm n5510-001249, hardwood wedge 200x 150x 75 mm n5510-001251, wooden mallet medium n5120-424701

corporations/Associations/Others

TRN :35943031 | 27 Nov, 2025

Tender Value : 32.03 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of bt road and drain from mandawa road to rakesh pti plot via govt school, ward no 12 -dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by engineer. bituminous courses "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 2.0 km" dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - ii material "providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti-stripping compound wherever required), including loading of material with f.e. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. with bitumen vg-grade 30 providing and applying liquid seal coat type "a" comprising of a layer of bituminous binder @ 9.8 kg/ 10 sqm (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) followed by a cover of stone chipping @ 0.09 cum/10 sqm of specified grading and rolling with power roller 8-10 tonne complete as per clause 513 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. with bitumen vg-grade 30 providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 5.0 km" providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick neat cement punning centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Central Government/Public Sector

TRN :35927921 | 09 Dec, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for vitridied tiles 600x600mm, coarse sand (zone -iii), port land pozolona cement 43 grade, 20 mm stone chips, white cement based putty, water thinalel cement primer, acrylic emulsion paint, acrylic smooth exterior paint, synthetic enamel paint, granite stone 20 mm black/cherry/rubby red, flush door shutter 35 mm thick, aluminium channe, float glass 8 mm, plywood 19mm, plywood 8mm, laminate sheet/sunmica (inner wall) 4x8ft, laminate sheet/sunmica 1.25mm 4x8ft, edge bend, stainless steel l-clamp, screw 19mm (box), screw 32mm (box), ply pin (box), fevicol hyper (2kg), fevicom heatx (kg), softclose hinges 9.5 crank, softclose hinges 0 crank, corner hinges 16 crank, telescopic channel, pvc skirting, pullout and turn for corner, tall pantry unit, adjustable feet, cutlery basket, plain basket (large), thali basket, overhead pulldown system, cup and saucer basket, wicker basket, bottle pullout, gas ventilator, handles, hydraulic pump (20kg), wood cutter blade, starbit, island chimney (900mm)

Central Government/Public Sector

TRN :35918290 | 28 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for h1 b 8030-000059 chlak french technical, h1 b 6850-000041 desiccant silica gel, h1 b 9150-000143 soap soft, h1 b 6810-000575 water for storage bty, h2 8305-000182-casd cloth dasooti cotton scarlet 91 cm, h28305-000084 2 cloth muslin white bleached 91 cm wide, h2 4020-000195 twine jute, h3 5530-400042 plywoodgeneral purpose wwr-ab-5 ply 240, h4 8040-000047 tapeadhesive w proof w 40mm x l 65 transparent waterproofwid, h4 8040-000048 tape adhesive transparentwaterproof wid, h4 8135-000041 paper wrapping735x1120 mm x 0.04 mm, h4 8135-000096 paper wrappingwaterproof plain 1189 mm, h5 1080-000040 1 ec poles, j15110-000461 handles axes pick head straight 915 mm, k67330-000078 u. c 45 men set degchie 305 mm, k6 7330-000053 utensil cooking 4 men set degchie medium, k65120-423117 u.c 4-6 men set slab wooden, f1 5110-000454 handles file 90 mm

Central Government/Public Sector

TRN :35920945 | 04 Dec, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for bees wax, cloth sponge cotton, soap liquid, broomsweeping, broom country, polythene film .05 mm think x 1m, linolium sheet thick brown, soap soft, paint rfumarking golden yellow, paint rfu matt finish olive green, paint rfu black, cotton waste coloured, musline blue 91cm, muslin white bleached, paper wrapping water proofplain 841mm, paper wrapping water proof plain 1189mm, turpentine, surf exel, abrasive paper glass is grit 50 sizeof, paint rfu air dry br spr ena green grass, paint rfugs syn dark brown, paint finishing matt rfu air drying b, bleach poowder stabilished, acid sulphuric pure, steelsheet carbon hot rolled, paint rfu marking white, paintrfu priming red oxide, paint rfu nitrocellulose finishing, paint rfu matrking signal red, paint rfu marking black, nails steel wire round 70mm x 3.15mm, aluminium sheethard 1.22mm, aluminium sheet half hard 1.63mm, wiresteel mild annealed 2.00mm, wire steel mild annealed5.00mm, steel angles 25x25x3mm, steel angles100x100x12mm, steel sheet carbon hot rolled 2500x100, wire steel mild annealed 1.25mm, nails steel wire round25mm x 2mm, nails steel wire round 40mm x 2mm, flannelette, plywood for general purpose mr-abp, plywood general purpose wwr ab 3 ply 240, plywood forgeneral purpose wwr ab 9 ply 240, plywood for generalpurpose mr bb 7ply, plywood for general purpose mr ab 9ply, ply wood marine 7 ply lxbxt 210cmx90cm, ply woodmarine 7 ply lxbxt 180cmx90cm, ply wood marine 5 plylxbxt

State Government

TRN :35921755 | 25 Nov, 2025

Tender Value : 0

Buldhana - Maharashtra

Tender for supply of various types construction materials - 80 mm. metal white-(hand broken metal) with royalty "40 mm metal white- (hand broken metal) with royalty " "40 mm metal black- (crusher broken metal) with royalty " "20 mm metal black- (crusher broken metal) with royalty " "12 mm metal black-(crusher broken metal) with royalty " "6 mm metal black-(crusher broken metal) with royalty " boulders rubbles and masonary stones sand river (unscreen) with royalty sand (nallah bed) soft murum with royalty hard murum with royalty soil cement 53 grade opc cement 53 grade ppc burnt bricks ( ii class) mild steel bars of various sizes tmt steel bars of various sizes oil paint isi mark plastic emulsion paint wall paint isi mark centring tar torpin oil bitumen pack tin 60/70 at mumbai murum carting only weste material carting mixter machine per day with desel and driver water tanker with desel and driver centring rent for drain work centring rent for cement road centring rent for building work rcc pipe 1000 mm rcc pipe 800 mm rcc pipe 600 mm rcc pipe 450 mm rcc pipe 300 mm compaction of earth work in embankment upto layer of 30cm comp machinary charges only compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete transporttion of soft murum on road side etc complete as per analysis "information board 1)size 1.20 x 0.90 " information board 2) size 0.75 x 0.90 transportation of excavated soil from ex-mat. tank to field up to 3km wooden door frame size 6 * 3.25 cement door frame size 63.25 wooden door size 6 3.25 plywood door size 6 * 3.25 door kits per door precost sheet oil engine meter stone ferlong stone jcb per hours rollar per day with desel driver griil work murga pavour block(gattu) quota tyles vetryfied tyles bt pod wc pod nutri trap ms poor ac sheet gi sheet distemper birla white 250mm pvc pipe 6 kg 250mm pvc pipe 4 kg 200mm pvc pipe 6 kg 200mm pvc pipe 4 kg 110mm pvc pipe 6 kg 110mm pvc pipe 4 kg 90mm pvc pipe 6 kg 90mm pvc pipe 4 kg 75mm pvc pipe 6 kg 75mm pvc pipe 4 kg 63mm pvc pipe 6 kg 63mm pvc pipe 4 kg sluice valve 80 mm sluice valve 125 mm sluice valve 150 mm sluice valve 200 mm sluice valve 80 mm air valve 50 mm air valve 80 mm air valve 50 mm reflux valve 80 mm gi pipe 80 mm pvc special tee,bend,coupler,taispeace,pipe gi special hang, nutbolt,rubber shocate, tee, bend solution 3 seater steel chaire 3 seater rcc chaire toilet sheet pump 5 bhp 200 mm & 120 mm head pump 10 bhp 200 mm & 120 mm head gi bend 80 mm gi coupller 80 mm control panal box steel angle chaniling facing primer plywood sheet ceramic tiles handwash basin tap water meter water roof cement paint at. gp gudegaon

State Government

TRN :35924416 | 25 Nov, 2025

Tender Value : 0

Buldhana - Maharashtra

Tender for supply of various types construction materials - 80 mm. metal white-(hand broken metal) with royalty "40 mm metal white- (hand broken metal) with royalty " "40 mm metal black- (crusher broken metal) with royalty " "20 mm metal black- (crusher broken metal) with royalty " "12 mm metal black-(crusher broken metal) with royalty " "6 mm metal black-(crusher broken metal) with royalty " boulders rubbles and masonary stones sand river (unscreen) with royalty sand (nallah bed) soft murum with royalty hard murum with royalty soil cement 53 grade opc cement 53 grade ppc burnt bricks ( ii class) mild steel bars of various sizes tmt steel bars of various sizes oil paint isi mark plastic emulsion paint wall paint isi mark centring tar torpin oil bitumen pack tin 60/70 at mumbai murum carting only weste material carting mixter machine per day with desel and driver water tanker with desel and driver centring rent for drain work centring rent for cement road centring rent for building work rcc pipe 1000 mm rcc pipe 800 mm rcc pipe 600 mm rcc pipe 450 mm rcc pipe 300 mm compaction of earth work in embankment upto layer of 30cm comp machinary charges only compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete transporttion of soft murum on road side etc complete as per analysis "information board 1)size 1.20 x 0.90 " information board 2) size 0.75 x 0.90 transportation of excavated soil from ex-mat. tank to field up to 3km wooden door frame size 6 * 3.25 cement door frame size 63.25 wooden door size 6 3.25 plywood door size 6 * 3.25 door kits per door precost sheet oil engine meter stone ferlong stone jcb per hours rollar per day with desel driver griil work murga pavour block(gattu) quota tyles vetryfied tyles bt pod wc pod nutri trap ms poor ac sheet gi sheet distemper birla white 250mm pvc pipe 6 kg 250mm pvc pipe 4 kg 200mm pvc pipe 6 kg 200mm pvc pipe 4 kg 110mm pvc pipe 6 kg 110mm pvc pipe 4 kg 90mm pvc pipe 6 kg 90mm pvc pipe 4 kg 75mm pvc pipe 6 kg 75mm pvc pipe 4 kg 63mm pvc pipe 6 kg 63mm pvc pipe 4 kg sluice valve 80 mm sluice valve 125 mm sluice valve 150 mm sluice valve 200 mm sluice valve 80 mm air valve 50 mm air valve 80 mm air valve 50 mm reflux valve 80 mm gi pipe 80 mm pvc special tee,bend,coupler,taispeace,pipe gi special hang, nutbolt,rubber shocate, tee, bend solution 3 seater steel chaire 3 seater rcc chaire toilet sheet pump 5 bhp 200 mm & 120 mm head pump 10 bhp 200 mm & 120 mm head gi bend 80 mm gi coupller 80 mm control panal box steel angle chaniling facing primer plywood sheet ceramic tiles handwash basin tap water meter water roof cement paint at. gp khatkheda

Central Government/Public Sector

TRN :35908794 | 09 Dec, 2025

Tender Value : 1.50 Lacs

Visakhapatnam - Andhra Pradesh

Tender for gem bids for flexible coolant pipe half inch 125mmx450mmlength safety goggles venus e102 chc blue knurling tool diamondpatterns14 tpi double roller coarse pitch 175mm knurling tool diamond patterns 21 tpi hacksaw blade hc300mm18tpi hacksaw frame 300mm bent snip 12 inch flat double cut bastard file 12 inch file wooden handle 4inch file wooden handle 6 inch ball pen hammer wood325mm soft hammer wooden 325mm soft hammerbrass 500gm drill drift 150mm presion tryscre 4 inch centre guage three angle in ingle pic 6090120 degree ballpin hamm500g large internal grinding wheel straightod 16mm x l 20mm x id 06mm wa60k8v internalgrinding wheel straignt od 22mm x l 25mm x id 08mmwa60k8v internal grinding wheel straight od 32mm x l32mm x id 10mm wa60k8v grindingwheel straight 200 x20 x 3175 cgc60 k5 vg grinding wheel straight 200 x 20x 3175 aa46 k5v8 allen socket head screws m6 x 50mm allen socket head screws m6 x 125mm allen socket headscrews m6 x 25mm allen socket head screws m5 x 50mm allen socket head screws m5 x 25mm allen socket headscrews m5 x 125mm csk head allen cap machine screwsm5 x 125mm cheese slotted head machine scwres m5 x125mm al snap head revert dia30 x 125mm slot drillhss dia8mm slot drill hss dia10mm end mill cutter hssdia18mm end mill cutter hss dia10mm end mill cutter hssdia12mm end mill cutter hss dia8mm end mill cutter hssdia6mm carbite end mill cutter hss dia5mm carbite ballnose end mill dia5mm carbite center drill bit hss a25x63 center drill bit hss a315x8 counter sink tool straightshank dia12 x 90 counter sink tool straight shank dia12 x120 hss hand remer dia4h7 hss hand remer dia18h7 hss hand remer dia20h7 hss straight taper shank twist drillfor reamer 4 dia39 hss straight taper shank twist drill for bid number gem2025b6900179 dated 17-11-2025 bid document1 65 1 1 reamer 5 dia4.9, hss straight taper shank twist drill forreamer 6 dia5.9, hss straight taper shank twist drill forreamer 8 dia7.85, hss straight taper shank twist drill forreamer 10 dia9.85, hss straight taper shank twist drill forreamer 12 dia11.8, hss straight taper shank twist drill forreamer 18 dia17.75, hss straight taper shank twist drill forreamer 20 dia19.7, tap set metric 60 hss m5 x0.8, tap setmetric 60 hss m6 x1, tap set metric 60 hss m8 x1.25, tapset metric 60hss m10 x1.5, tap set metric 60 hss m12x1.75, hss straight taper shank twist drill for metric tap m5dia4.2, hss straight taper shank twist drill for metric tap m5dia4.4, hss straight taper shank twist drill for metric tap m6dia5.0, hss straight taper shank twist drill for metric tap m6dia5.2, hss straigh taper shank twist drill for metric tap m8dia6.8, hss straight taper shank twist drill for metric tap m8dia7.0, hss straight taper shank twist drill for metric tapm10 dia8.5, hss straight taper shank twist drill for metrictap m10 dia8.8, hss straight taper shank twist drill formetric tap m12 dia10.25, hss straight taper shank twistdrill for metric tap m12 dia10.5, die metric 60 circular splitdie button m5 x0.8, die metric 60 circular split die buttonm6 x1, die metric 60 circular split die button m8 x1.25, diemetric 60 circular split die button m10 x1.5, die metric 60circular split die button m12 x1.75, die stock metric60circular split die handle m5 x0.8, die stock metric 60circular split die handle m6 x1, die stock metric 60 circularsplit die handle m8 x1.25, die stock metric 60 circular splitdie handle m10 x1.5, die stock metric 60circular split diehandle m12 x1.75, valve laping paste iliconcarbide, horning oil stone hbs 150 x 20 x 10 wa 120 v, stonedressr 150 x 25 x 25 sc 24 v, single point diamond dresserwith stan dia12.5 x 100 mm, facemil cutter insert tpkt 1804pdtr-m tt8020, end mil cut insert apkt 09t3 per-emtt9080, vertical boring insert milling wbgt060102, vertical boring insert milling tbgt060102, vertical boringinsert milling tpgt090204, od turnig insert turning cnmg120408 gm ap4135, od turnig insert turning dnmg 150612ap4135, od turnig insert turning vbmt 160408 ap0415, odturniginsert turning tpkn 2204 pdr ap m30, holdersimpclnr 2020 k12 telex holde, cutting playersflexible coolant pipe 1/2 inch 12.5mmx450mmlength, safety goggles venus e-102 -chc blue, knurling tooldiamond patterns14 tpi double roller coarse pitch 1.75mm, knurling tool diamond patterns 21 tpi, hacksaw blade hc300mm, 18tpi, hacksaw frame 300mm, bent snip 12 inch, flat double cut bastard file 12 inch, file wooden handle 4inch, file wooden handle 6 inch, ball pen hammer wood325mm, soft hammer wooden 325mm, soft hammer brass500gm, drill drift 150mm, presion tryscre 4 inch, centreguage three angle in ingle pic 60, 90, 120 degree, ballpinhamm500g large, internal grinding wheel straight od 16mmx l 20mm x id 06mm wa60k8v, internal grinding wheelstraignt od 22mm x l 25mm x id 08mm wa60k8v, internalgrinding wheel straight od 32mm x l 32mm x id 10mmwa60k8v, grindingwheel straight 200 x 20 x 31.75 cgc60k5 vg, grinding wheel straight 200 x 20 x 31.75 aa46k5v8, allen socket head screws m6 x 50mm, allen sockethead screws m6 x 12.5mm, allen socket head screws m6 x25mm, allen socket head screws m5 x 50mm, allen sockethead screws m5 x 25mm, allen socket head screws m5 x12.5mm, csk head allen cap machine screws m5 x 12.5mm, cheese slotted head machine scwres m5 x 12.5mm, al snaphead revert 3.0 x 12.5mm, slot drill hss 8mm, slot drill hss10mm, end mill cutter hss 18mm, end mill cutter hss 10mm, //bid details2 / 65

Related Searched Keywords : soft wood

List of soft-wood Tenders

Get soft wood Tender Alert...

Related Searched Keywords : soft wood

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us