Filters

List of latest Stone-Cladding Tenders in Indian Tenders. Click on any Stone-Cladding Tenders to view BOQ, NIT and Tender Documents. Get GeM and Bidding Support, Vendor Registration for Stone-Cladding Tenders.

All-Tenders (7)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :19873005 | 21 Jan, 2021

Tender Value : 0

Cochin - Kerala

Tender for cleaning of external surface around all sides of buildings including structural glazing, acp cladding, stone cladding, sunshades

corporations/Associations/Others

TRN :19848590 | 20 Jan, 2021

Tender Value : 0

Beed - Maharashtra

Tender for providing & fixing natural stone in basalt/sandstonedholpur, jodhpur of 150mm thk. in size & 275 x 175 in cement mortor 1:3 for composite masonary install stone member in plumb level & in aligment provide through stone at interval & necessary accessaoris like clips, bars, clamps or necessary are required for errection & stone masonary to supporting back brick wall & back up material. use pigment in mortor for grouting of colour match to natural stone, watering & cleaning etc complete as directed by engineer-in-chrage. providing & fixing natural stone in basalt/sandstonedholpur, jodhpur of75mm thickness in sadguru ghadai for300mm tread & riser with fixing method as per details drawings in 1:3 cement mortor with watering curing complete as directed by engineer-in-charge. providing & fixing cladding to columns & beams surface in natural stone in basalt/sandstonedholpur, jodhpur of 100mm thk. in size of 275 x 175mm in cement mortor 1:3 with necessary accessaries, fixture & adhesive of recommanded brands for fixing to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. sadguru ghadai providing & fixing cladding to round vertical columns in natural stone in basalt/sandstonedholpur, jodhpur of 75mm thk. in size of 275 x 175mm as per design & details in drawing in cement mortor 1:3 with necessary accessaries, fixture to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. sadguru ghadai . with neccessary design and covering as shown in drawing. providing & fixing composite masonary in dholpur stone of 100mm thk. in size of 275 x 175 in cement mortor 1:6 with 230mm thk. brick wall as back wall in super structure in first class. providing first class burnt brick masonary with conventional / i.s. type bricks in cement mortor 1:4 including scaffolding, racking out joints pointing in c.m. 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed complete. spec. no. bd. g. 9a page no. 317 install stone member in plumb level & in aligment provide through stone at interval & necessary are required accessaoris like clips, bars, clamps or necessary are required for errection & stone masonary to supporting back wall & back up material use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. sadguru ghadai providing & fixing cladding to vertical surface in dholpur stone of 75mm thk. in size of 275 x 175mm as per design & details in drawing in cement mortor 1:3 with necessary accessaries, fixture & adhesive of recommonded brands for fixing to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. applicatin: kaman vertical faces. providing & fixing arches of various sizes in 150mm thk. dholpur stone as per design & details in drawing in cement mortor 1:3 with necessary accessaries, fixture & adhesive of recommonded brands for fixing to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. providing & fixing railing in total dholpur stone as per details & design with necessary accessaries & adhesive for fixing & erection. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. providing & fixing mandir with lintel, sill / vertical posts / small brackets of various sizes in dholpur stone as per details & design with necessary accessaries & adhesive for fixing & erection. etc complete as directed by engineer-in-charge. application: main entrance foyer walls. providing & fixing 20mm thk. cladding for sloping chajja on rcc / m.s. frame structure as per details & drawingsin 1:3 mortor / adhesive for joints & also on r.c.c. surfaces as per directed by engineer in charge. providing & fixing brackets in sand stone yellow/pink of 100mm thk. of various sizes as per design & drawings with necessary accessaries & adhesive for fixing & erection as per directed by engineer in charge. application: main entrance kaman small size providing & fixing brackets in sand stone yellow/pink of 100mm thk. of various sizes as per design & drawings with necessary accessaries & adhesive for fixing & erection as per directed by engineer in charge. application: main entrance kaman big size providing & fixing ornamental elements as a frame to window w with lintel, sill / vertical posts / small brackets of various sizes in sand stone yellow/pink as per design & drawings with necessary accessaries & adhesive for fixing & erection as per directed by engineer in charge. small size providing & fixing ornamental elements as a frame to window w with lintel, sill / vertical posts / small brackets of various sizes in sand stone yellow/pink as per design & drawings with necessary accessaries & adhesive for fixing & erection as per directed by engineer in charge. big size providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple window w5 providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple window w1 providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple bracket large providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple bracket small providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple sloping chajja providing, cutting, bending, binding as per desired shape, armature reinforcement as per design drawing for ferrocement double skin elements for both the outer asn inner layer separately, providing and fixing with overlaps as recommended welded and hexagonal meshes on both the layers on both sides as per detailed drawing. providing, cutting, bending, binding as per desired shape armature reinforcement for stiffening ribs as per design drawing for ferrocement ribs, sandwiching 40mm thk. high density thermocol sheets between two layers of meshes, mixing and mortaring the mortor mix as per detailes mix given with 43 grade opc and suggested additives, finishing from both sides, maintaining desired line and level where required, curing using hessian cloth and continuous watering as per detailed specifications and work procedure etc complete. application: dome of ganesh temple/ main temple kalash providing and laying in position inlay work in flooring of granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortor including cement floats striking joints, pointing in c.m. 1:3 curing and cleaning etc complete. spec. no. bd.m.3 b page no. 380. providing and fixing french door with three panel fixed in t.w. frame of 125x75mm thk. all rails in 12mm thk. double ply & both side 6mm ply with laminate finish both panels are in 12mm thk. double ply with laminate finish as per detail drawings with all necessary fixtures fitting & polishing etc. complete approved by architect. fd-1. providing and fixing french door of a single panel fixed in t.w. frame of 150x100mm thk. with all rails of 12mm thk. double ply & both side 6mm ply with laminate finish with 10mm thk. m.s. square bars from outside & 8mm thk. plain glass from inside lower panel with 12mm thk. double ply with laminate finish from both side as per detail drawings with all necessary fixtures fitting & polishing etc. complete approved by architect. fd-2. providing and fixing 35mm thk solid core flush door with both side laminate & 12mm thk. teakwood moulding with 8mm thk glass fixed in 7mm lipping with both side 3mm glass film s.s. brush metal handle & aldrop etc. complete as per detailed drawing d7. providng and fixing glass façade as per design in 12mm thk. clear toughned glass fixed with ogc-15 standard single patch, opf 650 & 660 standard double patch & opf 620 quadraple connector along with 12mm thk toughned glass double leaf door fixed with solid osspf 1 over panel solid patch with pivot & lock patch, floor spring fs 940 of capasity 150kg & 7 years guarantee. provided with 3mm glass film as per design, ss handle as per selection. all glass joints to be sealed with neutral clear silicon of deworming or ge make etc complete. providing and fixing italian marble flooring 25mm to 30mm thk of required size in plain/diamond pattern on bed of 1:6 cement motor including cement float, fillings, joints with cement slurry, curing polishing and cleaning complete. providing and fixing clay brick jali stone studio red orchre terracotta jali 8inch x 8inch. brick blockc color - red, orche. brand -stone studio. item code - 144739564 providing and fixing cladding to slab in natural stone, curved shaped bevelled edge stone in cement mortar 1:3 with necessary adhesive and joinery and finishing with wateing ect complete. use pigment in mortar fpr grouting or colour match to natural stone watering ect complete as directed by engneers in charge. providing and fixing cladding to slab in natural stone, curved shaped bevelled edge stone in cement mortar 1:3 with necessary adhesive and joinery and finishing with wateing ect complete. use pigment in mortar fpr grouting or colour match to natural stone watering ect complete as directed by engneers in charge. providing and fixing carved columns and arch works in natural stone with edge with stone framing fixed with natural joinery and dome on the top with kalash, the vertical pillars and arches in squre shape manner as per design fixed with cement mortar 1:6 with neccessary adhesive of recommended brands and natral joinary. providing & fixing arches of various sizes in 150mm thk. in grcf as per design & details in drawing in cement mortor 1:3 with necessary accessaries, fixture & adhesive for fixing & erection. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. providing and fixing full bands off 100 mm thk with necessary mould in gfrc as per design and drawing with necessary accessaries and adhesive for fixing and erection as per directed by engineer in charge providing & fixing brackets in gfrc of 100mm thk. of various sizes as per design & drawings with necessary accessaries & adhesive for fixing & erection as per directed by engineer in charge. providing & fixing top of kalash of various size & design in gfrc as per the detail drawings & sizes with high density concrete made from portland cement, crushed stone, & polymers reinforced with continuous filament glass fiber mat & structural reinforcing as required. color to match sample.as per directed by engineer in charge . dimensions : 0.5m x 0.5m height : 0.5m, or required sizes .application: on kaman top providing & fixing top of kalash of various size & design in gfrc as per the detail drawings & sizes with high density concrete made from portland cement, crushed stone, & polymers reinforced with continuous filament glass fiber mat & structural reinforcing as required. color to match sample.as per directed by engineer in charge . dimensions : 1m x 1m height : 0.7m, application: on kaman top providing & fixing lotus shaped design in gfrc as per the detail drawings & sizes with high density concrete made from portland cement, crushed stone, & polymers reinforced with continuous filament glass fiber mat & structural reinforcing as required. color to match sample.as per directed by engineer in charge . dia : 1.33m providing & fixing arches of various sizes in 150mm thk. in grcf as per design & details in drawing with necessary accessaries, fixture & adhesive of recommonded brands for fixing to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. providing & fixing cladding to round vertical columns in gfrc of 75mm thk. as per design & details in drawing, fixture to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. sadguru ghadai . with neccessary design and covering as shown in drawing. providing & fixing top of kalash of various size & design in gfrc as per the detail drawings & sizes with high density concrete made from portland cement, crushed stone, & polymers reinforced with continuous filament glass fiber mat & structural reinforcing as required. color to match sample.as per directed by engineer in charge . dimensions : 1m x 1m height : 0.7m, application: on kaman top providing & fixing kaman arches of various sizes in 150mm thk. in grcf as per design & details in drawing with necessary accessaries, fixture & adhesive of recommonded brands for fixing to supporting back surface with watering etc. complete. use pigment in mortor for grouting or colour match to natural stone watering etc complete as directed by engineer-in-charge. thirthkshetra vikas yojne antargat tariffs are being invited as per the accompanying information sheet for the work to be undertaken for mc parli vaijnath

Central Government And Public Sector

TRN :19828880 | 15 Jan, 2021

Tender Value : 2.40 Lacs

Warangal - Telangana

Tender for repairs and environment development of ramappa temple, palampet, jayashankar bhupalapally execution of work. hiring of 16 t crane for lifting, unloading, fixing and positioning of stone slabs for construction of veneer / cladding stones of prakara wall at ramappa temple and as when required during execution etc. all complete as per asi officials directions

State Government

TRN :19741007 | 25 Jan, 2021

Tender Value : 112.00 Crore

Kota - Rajasthan

Tender for facade work on east bank of chamble river and clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. morth specification : clause 201. by mechanical means in area of light jungle earth work in excavation by mechanical means hydraulic excavator / manual means over areas exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: all kinds of soil construction of embankment with approved material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer pug mill, carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. morth specification clause 401. with all lead & lift providing and laying in position cement concrete including curing, compaction etc.complete in specified grade excluding the cost of centering and shuttering-all work upto plinth level.m10 grade nominal mix 1: 3: 6 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size. cement concrete flooring 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm thick nominal size aggregate. add extra if finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete. random rubble dry stone kharanja under floor. providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 1 cement: 3 coarse sand and making good the joints and cost of plastizers if required excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 1 cement: 3 coarse sand and making good the joints and cost of plastizers if required excluding the cost of centering, shuttering and reinforcement for walls any thickness including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. m20 grade nominal mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 1 cement: 3 coarse sand and making good the joints and cost of plastizers if required excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix providing and laying in position design mix cement concrete of specified grade for reinforced cement concrete architectural elements upto 5.0 mtr height from plinth level including curing, compaction, rendering in cement sand mortar 1:3 1 cement: 3 coarse sand and finishing of exposed surface with cement sand mortar 1:3 in required thicknes sand as per approved drawing & texture as per direction of engineer-in-charge and making good the joints and cost of plastizers if required excluding the cost of centering, shuttering and reinforcement for architectuarl arches, arch ribs, domes, vaults, shells, folded plate, chatri, pillar &todi of chatri, roofs having slope more than 15º, vertical and horizontal fins individually or forming box louvers, facias, eaves boards, and all other architectural elements as per direction of engineer-in-charge. m30 grade add extra for architectural rcc work for every 5.0 mtr or part thereof height above 5.0 mtr @ 5% separately. add extra for rcc work in superstructure above floor three level for each two floor or part thereof . add extra for providing richer mixes respectively at all floor levels providing m-35 grade concrete instead of m-20 grade design mix. providing, hoisting and fixing up to floor three level precast reinforced concrete work in nominal m20 grade mix including cost of required centering, shuttering, finishing, smooth with 6 mm thick cement plaster 1:3 1 cement: 3 fine sand on exposed surface complete excluding cost of reinforcement string courses, copings, bed plates, anchor blocks, plain window sills etc small lintels not exceeding 1.5 m clear span mouldings as in cornices, windows sills etc. lintels beams and bressumers including setting in cement mortar 1:3 1 cement: 3 coarse sand aggregate 20mm nominal size. shelves, vertical & horizontal fins individually or forming box louvers setting in cement mortar 1:2 1 cement: 2 sand add extra for rcc work in superstructure above floor three level for each two floor or part thereof . centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor three level for : walls any thickness including attached pilasters, buttresses plinth and string course. suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. columns, pillars, posts and struts etc. arches, domes, vaults etc. up to 6 mtr span. vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. add extra for shuttering in circular work in respective centering and shuttering items add extra for using steel props and bracings etc. instead of wooden members over item no. 4.11.1 to 4.11.11 above 10 m and up to 30 m.@12% of concern rate add extra for every additional 1 m ht. or part there of beyond 4.5 mtr. of shuttering. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:4 1-cement : 4-sand. flyash lime gypsum brick works with flyash lime gypsum brick works of class designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in : cement mortar 1 : 4 1 cement : 4 coarse sand p & f 1st qualityvitrified porcelain polished tiles on floor, skirting and steps etc.in different sizes thickness to be specified by manufactuer with water absortion less than 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure a :30 mm thick .decorative teak veenue both side providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. steel work in built up tubular trusses including cutting, hoisting height upto 10 mfixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. : hot finished welded type tubes. grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size providing and fixing in position collapsible steel shutters with vertical m.s. channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of t-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. to be measured and paid as per outer dimension.with 75 mm opening when closed. providing & fixing ball bearing for rolling shutters supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. m.s. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade no. 2 and m.s. top cover 1.25mm thick for rolling shutters as per design & is 6248- 1979. clear openable area to be measured for payment. providing and laying damp-proof course with cement concrete grade m-150 1 : 2 : 4 mortar prepared with 1% solution of water-proof compound complete as per specification .75mm thick. providing, hoisting and fixing up to floor three level precast cement concrete jali 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 1 cement : 3 fine sand etc complete as per approved design excluding, plastering of jambs, sills and soffits75mm thick providing and fixing aluminum work for doors, windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling, c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc., all complete as per architectural drawings and the directions of engineer- in – charge .glazing and paneling to be paid for separately. for fixed portion polyester powder coating aluminum minimum thickness of powder coating 50 micron for shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required lockes shall be paid for separately. polyester powder coating aluminum minimum thickness of powder coating 50 micron providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.cost of aluminium snap beading shall be paid in basic item. with float glass panes of 5.0 mm thickness weight not less than 13.50 kg/sqm providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, y and h aluminium sec as per drawing at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. polyester powder coating aluminum minimum thickness of powder coating 50 micron road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all complete upto floor three level. thermo-mechanically treated bars conforming of relevent is code providing and fixing combination stone flooring for pathways having both edges of border 40-50 mm black kadappa stone of size 825 mm x 400 mm, laid in 20mm thick cement mortar 1:4 as per approved drawing including centre part of path having shahbad brown antique finish of size 400 mm x 400 mm & in centre longitudinal every fourth stone of black kadappa of size 400 mm x 400 mm having fine finish jointing with white cement using pigments to match the stone shade etc. complete in all respect as per drawing design & specifications and as per direction of engineer-in-charge & architect with all lead & lift. thickness of stone 40-50mm. providing & fixing brown kota stone/ mandanastone cobble flooring structural base with white cement & tinex chemical & ss clamp and fasteners of approved brand laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached complete in all respect as per direction of engineer- in- charge & architectt with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 40-50mm. providing & fixing banswara white stone cobble flooring structural base with white cement & tinex chemical & ss clamp and fasteners of approved brand laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached complete in all respect as per direction of engineer- in- charge & architectt with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 40-50mm. flooring with cobble stone of approx. size 125x125x75 mm thick laid on 25 mm average thick cement mortar 1:3 1 cement : 3 coarse sand and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of engineer-in-charge.budhpura stone/red sand stone stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in cement mortar 1:6 1 cement : 6 coarse sand including pointing with white cement mortar 1:2 1white cement : 2 stone dust with an admixture of pigment matching the stone shade.white sand stone stone work machine cut edges for wall cladding/ veneering work up to 10m height with 20 to 30 mm thick red sand stone or similar as desired by architect and backing filled with a grout of 12mm thick cement mortar 1:3 1 cement : 3 coarse sand including pointing in white cement mortar 1:2 1 white cement : 2 stone dust with an admixture of pigment matching the stone shade :to be secured to the backing by means of cramps which shall be paid separatelyexposed face machine cut making groove of approved design upto 20 x 20 mm size in the joints of stone veneering work for walls, columns, offsets etc. including finishing in white cement marble mortar 1 : 2 1 cement : 2 marble dust with an admixture of pigment matching the stone shade, complete. providing and fixing stone jali 40mm thick red/pink sand stone throughout in cement mortar 1:3 1 cement : 3 coarse sand including pointing in white cement mortar 1:2 1 white cement : 2 stone dust with an admixture of pigment, matching the stone shade, jali patterns to be cut square to jali slab without any chamfers etc: providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 1 cement : 2 coarse sand including making the necessary chases in stone and holes in walls wherever required stainless steel copper gun metal khamira colour washing as per old traditional practice to prepare the khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, gugal, for nonsynthetic colour adding gum babool gum as per specification. then applying prepared solution on walls three to four thin coats as desired finishing. making mehrabs, arches, pillars, highly decorative creepers, flowerof small sizes etc.in lime surkhi plaster 1:2 as per b248old traditional practices arches, mehrabs in three coats for base course and subsequent course and loi tamping, beating till the shrinkage cracks are disappear than making ornamental flowering/design etc. the work is to done with all leads and lifts as per work of restoration nature as per jaipur practice. providing & applying lime kara 1:2 1lime cream : 2 zikki powder grinding mortar with grinding mill/manually on lime base, on ceiling and all flat surface in two coats. first coat applying 3 mm to 4 mm thick and curing properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice.thickness not more than 6 mm. add extra for lime kara work on lime plaster base other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on : domical surface/spherical/domical ceiling. curved surface. making kangura on top of the wall as per jaipur traditional practice with tile brick bats/stones in grinded lime surkhi mortar 1:2 thickness of kangoora 15cm & height 45cm, finishing with lime surkhi mortar 1:2 complete in all respect up to 10.00 meter from ground level including all scaffolding, lead & lift. wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . 12mm thick . providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. new work finishing walls with textured exterior paint of required shade : new work two or more coats applied @ 3.28 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide extra if square, rectangular hollow tubular sections are used or grill made by flats only add extra over above item for cast iron spike railing providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm av. thick base of cement mortar 1 : 3 1 cement : 3 coarse sand jointing with white cement mortar 1 : 2 1 white cement : 2 marble dust with pigment to match the shade of the granite slab complete including rubbing and polishing of : south red / choclate colour1501 cm2 to 3600 cm2 tiles providing and fixing 12.5 mm thick tapered edge gypsum board conforming to is 2095- part i at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in charge but excluding the cost of painting. providing and fixing high intensity retro reflective type iv sign platemade out of 2.00 mm thick aluminium sheet face to be fully covered with blue/green high intensity grade retro reflective sheet and logo/matters, boarder made of with similar type of white sheeting after etching treatment of aluminium sheet, the black side is to be painted with epoxy grey paint. the plate is to be fixed on 40x40x5 mm angle iron frame with help of aluminium rivets. half flyash lime gypsum brick works in foundation & plinth using flyash bricks of designation 75 cement mortar 1 : 4 1 cement : 4 coarse sand providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete including the cost of cement mortar bed 1:4. extra for using marble printed / granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and mat finished tiles.15% of @ 711 per sqm providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete excluding the cost of cement plaster on walls and pillar. providing and fixing 12 mm thick prelaminated three layer medium density exterior grade particle board grade i, type ii conforming to is : 12823 bonded formaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. : prelaminated particle board with decorative lamination on both sides. providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm av. thick base of cement mortar 1 : 3 1 cement : 3 coarse sand jointing with white cement mortar 1 : 2 1 white cement : 2 marble dust with pigment to match the shade of the granite slab complete including rubbing and polishing of : good quality south black above 3601 cm2 slabs painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work provding and fixing stainless steel gate gratting and made of stainless steel pipe/plate with hold fast and fitting and complete as per design and driwing including cutting welding etc. the stainless steel shall be 304 grade and shall confirm to relevant i.s. specifications.for globe providing and fixing in position copper plate as per design for globe expansion joints raised type as per approved drawing. part: b-sanitry fixtures p & f white vitreous china double syphonic european w.c. i.s:2556mark with mounted w.v.c. flushing cistern of is : 2556 mark of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. p & f wvc wash basin 1st quality, i.s. : 2556 mark of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock is : 8934 mark & 32 mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting & making good the wall.: size 580 mm x 450 mm p & f lst quality wvc urinal is:2556 mark with 25mm dia g.i. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. flat back large or half stall size 610x400x80mm. p&f marble urinal partition slab both sides polished of approved design cut from marble size 900x600mm. makrana ii quality marble having light spots p & f indian type white glazed vitreous china 1st quality w.c. orissa pan is :2556 mark with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: size 580x440mm. p & f flush pipe of approved make with complete fittings for high level flushing cistern: g.i. `b` class concealed 32 mm. p & f pilllar cocks is :8934 mark of superior quality and approved make: c.p. pillar cock fancy type, 15mm nominal bore. p & f bib cock is : 8931 mark, superior quality of approved make: -do- elbow-action, 15mm nominal bore. c.p. brass bib cock, 15mm nominal bore. p & f c.p. brass urinal spreader for large urinal of heavy duty of approved make as per direction of enginner-in-charge p & f c.p. brass doom waste coupling 32 mm dia. p & f bottle trap of approved make : c.p brass 40 mm p & f toilet paper holder with rod of approved quality/make: c.p. brass heavy & superior quality. providing and fixing unplasticized poly vinyl chloride upvc swr pipes type b for sciland waste discharge system is:13592 : 1992 marked of approved quality /make 75 mm dia 110 mm dia providing and fixing unplasticized poly vinyl chloride upvc swr pipes fittings type b for sciland waste discharge system is:13592 : 1992 marked of approved quality /make bend 45 dg. 110mm dia socket plug 110mm dia pipe clip 110mm dia single tee 110mm dia gully trap 110mm dia nahni trap with jali 4” 110mm dia vent cowel 110mm dia p & f pvc storage tank isi marked is : 12701 indicating the bis license no, of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 -do- hoisting charges for each floor : for items 2.26.5 to 2.26.8 p & f liquid soap container with brackets complete of approved make:c.p. brass p & f mixing range 15mm -do- with swinging spout casted. p & f sand –cast floor trap nahni of is:1729 mark of approved quality/make with socket down or hinged grating including cutting and making good the floor. size 100 x 75mm providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work exposed on wall 20mm nominal outer dia pipes 25 mm nominal outer dia pipes 32mm nominal outer dia pipes 40 mm nominal outer dia pipes 50 mm nominal outer dia pipes p & f ball cock is :1703 mark with rod & p.v.c. ball complete : -do- wt.not less than 800 gm, 32mm. -do- wt.not less than 1200 gm 50mm. providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. morth specification : clause 1000/2900. 300 mm dia supplying and fixing c.i. cover with frame, c.i. gratings for chambers & man holes. p&f concealo neo 80 mm with loop flush plate including cutting and making good the wall and floor as per enclosed drawing, complete in all respect as per direction of enginner- in- charge and architect. make jaquar, hindware and kohler etc. providing & fixing wall mounted frame for fixing of wall mounted ewc complete in all respect as per direction of enginner- in- charge providing and fixing watch closed matrix set-1 as per manufactured by approved make hindware/jaquar/ grohe/ kohler or approved equivalent for handicap toilet complete cistern with lid with solid white plastic seat with cover & wash basin all complete as per approved make. providing & fixing stainless steel roob hock of approved make dia. 6” as per direction of engineering-in-charge. p & f 1.6 mm thick m.s. recessed fan box, hexagonal/ round of size 100 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . s&f following sizes dia. of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 20 mm 32 mm part-c horticulture surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr. and lift up to 1.5 mtr.: all kinds of soil supply & stacking good soil of earth at site complete including loading unloading & transportation etc. good soil of earth supply of dry manure including loading unloading, transportation & stacking at site. goat dungmanure. spreading of manure and good earth in required thickness cost of manure and good earth to be paid separately. preparation of mounds of various size and shape by available excavated/surplus/earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc.lead upto 50 meters and lift upto 1.5 m as per direction of officers in charge. supply of chemical fertilizers at store in bags weighing not less than 50 kg. each including loading unloading & transporation etc. urea d.a.p. super phosphate. murrate of photash. supply of insecticides & pesticides at store in dust / liquid form complete. methyl prathion 2%. karathion liquid. metacid liquid. roger liquid. cholorophyriphos 20 ec. digging holes in all kinds of soil and refilling the same with the excavated earth mixed with well decayed farm yard manure cost of well decayed farm yard manure to be paid separately. hole 0.9 m dia and 0.9 m deep hole 1.2 m dia and 1.2 m deep supply & plantation of selected specimen plants including mortality replacement, loading - unloading transportation and maintenance for 30 days after planting the plants as per scope of work for horticulture 1. preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 2. supply of dry manure farm yard manure organic 3. supply of insecticides. 4. digging of pits size 60x60x60 cms.

Central Government/Public Sector

TRN :19770244 | 27 Jan, 2021

Tender Value : 31.76 Lacs

Varanasi - Uttar Pradesh

Tender for zone work :- repair of roof leakage of building under aden/ballia jurisdiction. for period ending 30.06.2021

Central Government/Public Sector

TRN :19770246 | 27 Jan, 2021

Tender Value : 22.85 Lacs

Varanasi - Uttar Pradesh

Tender for zone work :- handia khasex - prayagraj rambaghin section for period ending 30.06.2021

Central Government/Public Sector

TRN :19754322 | 22 Jan, 2021

Tender Value : 39.15 Lacs

Varanasi - Uttar Pradesh

Tender for zone work :- repair of roof leakage of building under aden/siwan jurisdiction. for period ending 30.06.2021

Related Searched Keywords : stone cladding

List of latest Stone-Cladding Tenders in Indian Tenders. Click on any Stone-Cladding Tenders to view BOQ, NIT and Tender Documents. Get GeM and Bidding Support, Vendor Registration for Stone-Cladding Tenders.

Tender for cleaning of external surface around all sides of buildings including structural glazing, acp cladding, stone cladding, sunshades

Tender for zone work :- repair of roof leakage of building under aden/ballia jurisdiction. for period ending 30.06.2021

Tender for zone work :- handia khasex - prayagraj rambaghin section for period ending 30.06.2021

Tender for zone work :- repair of roof leakage of building under aden/siwan jurisdiction. for period ending 30.06.2021

Get stone cladding Tender Alert...

Related Searched Keywords : stone cladding

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us