Filters

List of plastic-case Tenders

List of latest plastic-case Tenders in Indian Tenders. Click on any plastic-case Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for plastic-case Tenders.

All-Tenders (22)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35345555 | 14 Oct, 2025

Tender Value : 0

Samastipur - Bihar

Tender for supply of traction center machined for vb/ts, as per drawing: drg no. d-a675uv2- 137352 rev-01., packing instruction: detail of revised packing instruction of traction center to pl no. 33500113 1. the traction center to pl no. 33500113 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 3. the traction center to pl no. 33500113 should be packed in 15 nos in iron box pallet returnable / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 4. each packing should have an identification showing p.o. no., pl no. description, drawing no./spec., quantity, firms name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. 5. in addition to this, the following instructions can be considered to be added to the packing instructions for ensuring proper identification and linkage of the items against the purchase orders:- 5.1 the item or its packing shall carry a qr code containing the details as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number or lot number for bulk items of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date 5.2 the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 5.3 in case the above details are not available or the qr codes are not readable, the supplied material is liable to be rejected..

Central Government/Public Sector

TRN :35352803 | 22 Sep, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for miscelanceous, copper alloy taps/stop valves v2 conforming to is 8931q3, soap dish - case q4, waste fittings for washbasinand sinks as per is 2963 q3, bathroom water showerv2 q3, towel rail / ring for bathroom q3, plastics bibtaps pillar taps angle valves and stop valves as per is9763:2000 latest q3, connection pipe with nuts v2q3, flushing cistern q3, toilet seat covers v2 q4, waste pipe q3, brass spindle for bib cock 15mm, brassspindle for concealed stop cock 15mm, pvc connectionsize 15 mm x 375mm, pvc float valve 15mm, pvc floatvalve 20mm, pvc float valve 25mm, rod for float valve, pvc waste coupling 32mm, pvc waste coupling 38 or40mm, pvc long bend for flushing cistern, handle for pvcflushing cistern, syphone set complete for internal cisternfitting, window glass panes 1200mm x 1200mm x 4 mm, adhesive for pvc wall panelling, gypsum screw 0.75mm, gypsum screw 2mm, plumbing thread cotton or dhaga roll, clamp for rain water pipe 100 mm, stainless steel fastner

Central Government/Public Sector

TRN :35333863 | 22 Sep, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for copper alloy taps/stop valves v2 conforming to is 8931q3, connection pipe with nuts v2 q3, bathroom ortoilet mirror v2 q4, bathroom water shower v2 q3, waste fittings for washbasin and sinks as per is 2963 q3, toilet seat covers v2 q4, water fittings - copper alloyfloat valves horizontal plunger type as per is: 1703 q4, plastics bib taps pillar taps angle valves and stop valves asper is 9763:2000 latest q3, flushing cistern q3, rotational moulded polyethylene water storage tanks v2conforming to is 12701 q3, soap dish - case q4, stainless steel shelf rack q3, sinks q3, towel rail /ring for bathroom q3, wire mesh fabric or cloth v2 asper is 1568 q3, copper alloy gate valve for waterworkspurpose as per is 778 q3

State Government

TRN :35289459 | 25 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for gem bids for electrical, study of self and mutual inductance measurment trainer kit, battery charger, inverter, battery for inverter, colour coded resistances, sliding rheostats, induction coil, dc regulated power supplies, multipurpose wire stripperand cutter, combination plier insulated 8 inch, roundwire gauge, voltage or line tester, voltage or line testernon contact, tape roll, rccb 40 amps 4 pole, singlecore wire 4 sqmm roll, single core wire 2.5 sqmm roll, single core wire 1.5 sqmm roll, single core wire 1 sqmmroll, 3 phase 4 core cable 10mm square roll, 3 phase 4core xlpe cable 35mm square roll, display boarddifferent wires and cable, display board different switches, desert cooler, room heater, electric kettle, voltagestabilizers, digital megger, single phase powermeasurment kit, three phase switch fuse unit, dol starter, electric drill kit, l key set, soldering gun kit, model cutsection ceiling fan, power cable jointing kit, single phaselamp load, three phase lamp load, led street light, heavy duty power extension board, pvc casing capping, flexible pvc pipe, pvc conduit pipes, motor coil windingmachine, heat convector, electric oven, digital clip onmeter, measuring tape, screw driver mains voltage tester, trainer board to study chopper, trainer board to studydual converter, trainer board to study cycloconverter, study of mosfet trainer kit, scr based lamp intensitycontrol, parallel operation of alternator, dc series motor, single phase transformer, sepratly excited dc generator, tachometer, synchronous generator, rs flip flop, t flipflop, multiplexer and demultiplexer trainer kit, portablemoving iron voltmeter, portable moving iron ammeter, portable wattmeter, portable standard energy meter, thermocouple trainer kit, portable frequency meter, model cut section of refrigerator, cut section model of air /bid number: gem/2025/b/6640554* /dated: 05-09-2025 & & / bid document1 / 127 & & /item categoryconditioner, mercury vapor lamp kit, sodium vapor lampstudy kit, halogen lamp study kit, neon lamp study kit, compact fluorescent lamp cfl study kit, resistancewelding machine, 8085 microprocessor trainer kit, 3 corecopper cable roll, 4 core copper cable roll, 2 corealuminium cable roll, double pole mcb with box, 4 polemcb with box, led tube lights, galvanized iron wire 100mtr, nut bolt with washer, circle cable clip, heavy dutyswitch socket with gang box, thimbles, anvil 50 kg withstand, ball peen hammer 500gm, basted file 12 inch, bench type drill machine capacity 13 mm, bench vice, divider 12 inch, flat file 12 inch, flat file rough 10 inch, grinder, hand hacksaw frame, hs twist drill 5, 6.8, 8.5, 10.5, 12.5, 5 or 8, 3 or 4, pipe vice, pipe wrench 8 inch, screw driver kit, sledge hammer 5 kg, smooth file 12 inch, square face hammer 500 gm, steel foot rule 300mm, steel foot rule 600mm, steel number punch 5mm, trysquare 8 inch, vernier caliper lc 0.02mm, 150mm, acetylene cylinder, acetylene pipe 15 meter, acetyleneregulator with spanner, chipping hammer, circle cuttingmachine, edge folding machine, foot shear machine, foundry bellow, funnel stake, gaggers, gate cutters, gloves pair, hand rammer, hand stake, ladle, ladleholder, leg vice 4 inch, lifter or tong 2 in 1, millingmachine conventional, molding board, molding boxesflasks, oil fired tilting type, oxygen regulator withspanner, oxygen cylinder, oxygen pipe 15 meter, planner, pneumatic rammer, riddle, rivet set, rivet snap, round die handle, round stake, sand mix muller, scriber 8inch, shaper, sheet steel wire gauge, shovel, single snip, slick, swab, swage block 4 inch, tap wrench 5 or 16 in 1in, taper stake, tong 12 inch flat, trowel, welding screen, welding torch high pressure, welding torch low pressure, gear tooth vernier, sling psychrometerstudy of self and mutual inductance measurment trainerkit, battery charger scr based automatic 12 v, ac inputvoltage 230 v, output dc voltage 0-12 v, 0-2 amp. ratingprovided with voltmeter, ammeter of suitable range, inverter pure sine wave inverter of rating 1500 va ormore, compatible with one 12 volts battery and noiselessoperations., battery for inverter tubullar lead acidbattery min 180 ah, colour coded resistances resistancesof different values viz 5ohm, 10 ohm, 50 ohm 200 ohm, 250ohm, 500 ohm, 1000 ohm with 50 pieces each, slidingrheostats wound with evenly oxidised iron free nickelcopper wire on vitreous enamelled round steel tube.contactors should be of laminated phosphor bronze sheet, resistance tolerance ranges + 20% or 5% double tube, induction coil induction coil of 50 turns and 100 turns woundon non-magnetic material cylindrical surface with provisionto connect galvanometer., dc regulated power supplies 0-30v, 5a, dc and also with short circuit and over leadprotection with measuring devices, multipurpose wirestripper and cutter stripper should automatically adaptsitself to wires from 10 to 24 awg. capable of striping, cutting and crimping copper, aluminum, sheathed core wireand cable. handle made of thermoplastic rubber., combination plier insulated, 8 inch 8 inch combination pliersmade from high grade steel with high quality insulationsleeves., round wire gauge measuring range - 1 to 36mm, material - stainless steel, shape round, voltage/linetester 12v-220v ac/dc contact type plastic digital testerwith lcd display and neon bulb, voltage/line tester non-contact non-contact voltage tester, 12-1000v ac voltage //bid details2 / 127 detector with sound and light alarm, digital display, autopower off, capable of identifing live/null wires and locatesbreakpoints without touching wire, tape roll pvc insulationtape roll fire retardant self-extinguishing, durable, waterproof and weatherproof insulation, rccb 40 amps 4pole rccb a type 4 pole ac, residual current - 300ma, rated current - 40a, horizontal din rail mount type, singlecore wire 4 sqmm flexible single core 4 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, singlecore wire 2.5 sqmm flexible single core 2.5 sqmm copperstranded wire with 1100 v, , flame retardant, wetherresistant having minimum 90 meter wire in roll, singlecore wire 1.5 sqmm flexible single core 1.5 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, singlecore wire 1 sqmm flexible single core 1 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, 3 phase 4core cable 10mm square 10 sqmm flexible cable, having 4cores of stranded copper with current rating of minimum73 amp and voltage rating of minimum1100 volts, 3 phase4 core xlpe cable 35mm square 4 core aluminumconductor, xlpe insulated, galvanised steel strip / wirearmoured cables as per is 7098 with voltage rating of 1100volts or more and current rating of 117 amp or more, display board - different wires & cable display board withboard size 4 feet x 3 feet, having good strength, minimum12 types of wire and cables, actual components mountedright across the place with name plate., display board -different switches display board having following types ofswitches toggle, slide, push button piano key, rotary, spst, spdt, dpst, dpdt, band selector, multi-way mastermains switch and actual components mounted right acrossthe place with name plate, desert cooler desert cooler with18 gauge galvanized sheet metal body with 35l tankcapacity, 14 200w isi fan motor, honeycomb pads withstand., room heater wire wound type, 1000 watts, 230 v, 50 hz supply, electric kettle 750 watts, 230v single phaseac, 50hz, capacity 1 litre, voltage stabilizers 500 va, input170/260 volts, output 210- 240 volts automatic withvoltmeter, digital megger portable digital megger/ in testvoltage 1000v with range of 0.01m ohms to 4000 m ohms, with 0.1m ohm resolution, battery operated, hand held, single phase power measurment kit single phase 230 voltssingle phase power measurment kit with completeaccessories and operation manual and single phasesuitable load, three phase switch fuse unit surfacemounting type 415v, 100a rewireable switch fuse unitwith separate bus bar unit having 4 aluminum bus bars, dol starter 10 hp-7.5kw dol starter, operating voltage: 415v ac 3-phase, operating mode :auto / manual display :7 segment 3-digit overload range : 2 -50amp indicationat motor on by lamp start -stop by push button metalbody, electric drill kit drill capacity, 5-22 mm in concrete, 5-10 mm in steel rated voltage 235 volts, 50 hz, ac, fullload input 450 watt, full load speed 650 rpm. impact rate3270 blows/minute, l-key set hex key size: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, anti-corrosion, anti rust, soldering gun kit instant actionsoldering device trigger controlled with built in illuminationof soldering butt bakelite housing, normal power 45 watts, with approx. 2 mts supply cord suitable for electric supply of230 volt ac, single phase 50 hz. accessories: i fine bit ii //bid details3 / 127 bit for plastics, model cut section ceiling fan model cutsection of ceiling fan showing its internal parts, powercable jointing kit epoxy based cable jointing kit, singlephase lamp load portable single phase 230v, 50hz, 3kwelectrical lamp load, front panel built with high classinsulated bakelite sheet with sticker well printed circuitsand symbols, voltmeter, ammeter, on board switches tovary the load as per requirment and with wheels installedon bottom to move, three phase lamp load portable threephase 440v, 50hz, 5kw electrical lamp load, front panelbuilt with high class insulated bakelite sheet with stickerwell printed circuits and symbols, voltmeter, ammeter, onboard switches to vary the load as per requirment and withwheels installed on bottom to move, led street lightmaterial-aluminium, input voltage-90-305v, lighting type-led, ip rating-ip65, power watt - 100w , heavy dutypower extension board single phase 220v, 3 socket 15aheavy duty power extension board with surge protector and3.5 meter long 3 core pure copper wire, pvc casingcapping pvc casing and caping with 1 inch width and 12 ftlength for electric wire installation, flexible pvc pipe ltelectrical wiring flexible pipe 20 mm with 30 mtr length, pvc conduit pipes lt 32mm pvc electrical conduit pipe, 3mtr length, motor coil winding machine motor coil windingmachine, bench mounted, power driven, wire diameter 0.02to 1.2mm, lcd display, 50-6000 rpm, 0.5 hp, 230v, 50 hz, single phase ac motor,, heat convector operating on 230v, 50hz single phase power supply, 1000/ 2000w power ratingwith thermostat for temperature control, isi mark., electricoven electric oven 15l capacity with heat convection, double heating rods 1000 watts each with glass door andstainless steel body., digital clip on meter i display 3.5digits ii max. reading 1999 iii ac current resolutionaccuracy range 200 amps to 100 ma +1.25 to 5 digit 100amps to amp iv ac voltage 2000 v to 0.1 v : +1% to 5 digit1000 v to 0.1 v : + 1% to 5 digit v resistance 200 m ohmsto 0.1 ohms + 1.00% , measuring tape pocket measuringtape of steel spring return device, flexible, clearly graduatedin metric readings 2 mts long, screw driver mains voltagetester flat tip screw driver with built in new test lamptransparent plastic handle insulated block, metal pocket clipsuitable upto 400 v. ac blade 4 x 100 mm overall length180 mm, trainer board to study chopper single phase 230volts trainer board with complete accessories andoperation manual, trainer board to study dual convertersingle phase 230 volts trainer board with completeaccessories and operation manual, trainer board to studycycloconverter single phase 230 volts trainer board withcomplete accessories and operation manual, study ofmosfet trainer kit single phase 230 volts trainer boardwith complete accessories and operation manual, scrbased lamp intensity control single phase 230v, 50hztrainer board with scr-triac ac voltage controller kit withscr, triac, ac source voltage, inbuilt analog basedtriggering pulse unit, lamp load and fused protection., parallel operation of alternator 2no. 3 phase 3kva 415v, 50 hz alternators with suitable prime mover and panelhaving analog voltmeter: 03 nos analog ammeter: 03 nosanalog frequency meter: 02 nos lamp board bank forlamp method: 01 no phase sequence meter: 02 nos 3 pointdc starter: 02 nos alternator excitation unit: 02 nos fieldrheostat: 02 nos. connected externally with rpm meter, necessary switches, fuses with all terminal brought out, dc series motor dc series motor, 230 v, 3 hp, 1440 rpm //bid details4 / 127 with breaking eddy current or drum pulley arrangementand appropriate panel board and over speed safetyprecautions e.g. light shunt winding etc, single phasetransformer single phase transformer, 230/115 v, 50 hz, 3kva housed in a metal tank with all terminal brought out, three phase lamp load 4 kw three phase lamp load withmetallic housing and available with suitable mcb, switches, voltmeter and ammeter. front panel built with high classinsulated bakelite sheet with sticker well printed circuitsand symbols, sepratly excited dc generator separatelyexcited dc generator, 230 volt, 5 h.p, 1440 rpm completewith appropriate panel board with voltmeters, ammeters, switches, indicators, starter and field regulator withappropriate panel board with voltmeters, ammeters, switches, indicators, starter and field regulator and allterminal brought out, tachometer digital non-contact typetachometers 0-10, 000 rpm, 3 1/2 digit, synchronousgenerator 3 phase, 415 volt, 5 h.p., with prime mover, 110volts dc shunt generator as excitor, starter, outputterminals brought out with 3 phase 3kw lamp load, rs flipflop single phase 230v, 50hz trainer board to study rsflip flop, t flip flop single phase 230v, 50hz trainerboard to study t flip flop, multiplexer and demultiplexertrainer kit single phase 230v, 50hz trainer board with, 8:1multiplexer, 1:8 demultiplexer, 4:1 multiplexer, 1:4demultiplexer, portable moving iron voltmeter 0-300 volts, ac voltmeters portable moving iron 150 mm uniform scalewith anti parallax mirror, knife edge pointer, housed in ateak wood/ebonite case, accuracy +1.5%, portable movingiron ammeter 0-5 ampere ac ammeters portable movingiron, 150 mm uniform scale with anti parallax, mirror, knifeedge pointer, housed in a teak wood/ebonite case, accuracy+1.5%, portable moving iron ammeter 0-10 ampere acammeters portable moving iron, 150 mm uniform scale withanti parallax, mirror, knife edge pointer, housed in a teakwood/ebonite case, accuracy +1.5%, portable wattmeterportable dynamometer type, housed in teak wood/ebonitecase, scale 150 mm knife edge pointer with anti parallax, current range 0-5-10 amp voltage range 0-250-500 volt, portable standard energy meter single phase, inductiontype 50 hz, 5a/10a 250 v, portable standard energy meter3 phase, induction type, 4 wire.440 v 10 a, 50 hz., thermocouple trainer kit thermocouple trainer kit witharrangements of thermocouple sensor for copperconstantan thermocouple, oven for heating, lcd display, 2no.s thermometers suitable to measure temperature from0 c to 200 c., portable frequency meter digital, 4 digit leddisplay frequency meter suitable for use on 230 v ac mainsupply range 20-99 hz, portable frequency meter vibratingreed type 230 v, having 21 reed 40-60 hz. abs body, portable frequency meter moving coil type, portablehoused in phenolic moulded body with antiparallax mirror.scale and knife edge pointer, range 40-60 hz, 230 v, modelcut section of refrigerator model cut section of refrigeratorfor study electrical circuit of refrigirator, cut section modelof air conditioner cut section model of domestic window airconditioner to study electrical circuit of air conditioner, mercury vapor lamp kit mercury vapour lamp 120 watt, 230v, 50 hz ac supply complete with choke, lamp holderand power factor capacitor, sodium vapor lamp study kitsodium vapour lamp 120 watt/250 watt, 230 volts, 50 hzwith choke and lamp holder, halogen lamp study kit 1000watts/1500 watt, 230 v, 50 hz complete with fittings, neonlamp study kit single phase 230 volts neon lamp study kit //bid details5 / 127

Central Government And Public Sector

TRN :35292162 | 27 Sep, 2025

Tender Value : 0

Kathua - Jammu And Kashmir

Tender for gem bids for purchase, angle grinder 100 mm angle grinder 1000125 mseal general purpose tap set 3mm with handle tapset m4 hss tap set m5 hss tap set 20 mm tap set64 mm cutting wheel 100 mm grinding wheel ag4grinding wheel dia 100 mm cut off wheel 14 inch painting brush 2 painting brush 75mm paintingbrush 4 hss tap set 16 mm multiply 2 mm loctitebonding 495 20 ml vial loctite 406 adhesive 20 gm grease gun bucket type heavy type with accesories5kg silicon sealant 280 ml towel big plain cottonhand gloves pressure gauge 0 to 16 kgcm2 150 mmdial bottom entry 1 by 2 bsp m ss wire brush 6 row carbon steel 2 bolt hose clamp plastic bucket 24litre capacity welding googles black safety googleswhite plastic mug or glass number punches 10 mm19 cyrillic steel stamps upper case aphabet punchset 10 mm teflon tape rubber bush for flexiblecoupling size od32 mm id 19mm length 32mm hacksaw frame 2bb 12 inch torch mounted flashback arrestor for oxyzen gas model fr18 permanent marker battery aa r6 dry cell impactsocket 3by4 sq drive 36 mm extension rod 3by4drive extension rod 3 by 4 inch drive 200 mm long impact socket 3 by 4 sq drive 30 mm heavy dutysocket 3 by 4 sq drive 24 mm ss socket size 27 mm impact socket 32 mm square drive size 3 by 4 inch impact socket 41 mm 3 by 4 inch square drive socket46 mm 3 by 4 inch drive long ball point allen keyset9 pcs long length 250 short length 100 carbonsteel oil heater dial gauge with magnetic baseleast count 10 micrometer turn buckle eye to eyetype 1 tonne cpacity anchor fastner nut bolt size10 mm anchor bolt 12mm ms angle 25253 mm ms bid number gem2025b6642757 dated 06-09-2025 bid document1 127 1 1 angle 30 30 3, ms angle 50 50 5 mm, chain pulleyblock 1 ton with 3 mtr fall, chain pulley block cap2ton into 3mtr, tool kit bag, araldite 180 gm, rechargeable led torch light, extension board 5amp, power supply board 15by 16amp withextension cord, 3 core pvc flexible copper cable 2point 5 sq mm, 3 core pvc flexible copper cable 1point 5 sq mm, modular switch socket combined 16amp piano type, plug top 3 pin 6 amp, plug top 16by20 amp 3 pin, hss drill bit 6mm, hss drill bit 8mm, hss drill bit 14mm, cotton waste, markin cloth, malmalcloth, loctite 243 50ml 35061000, ss hexa headl boltm16 106 half thread, caf gasket 1mm thick, gasketsheet 1 point 5 mm thick, caf gasket 2mm thick, cafgasket 2 point 5 mm thick, gasket sheet 3mm thick, asbestos gasket 3 point 5 mm thickness minimum1mtr wide, champion gasket 54 super 4 mm thick, asbestos gasket sheet no 20 size 5 mm thick, glandpaking 14 mm, red paint, green paint, epoxy paintconsists of base and hardner, loctite stainlesssteel putty pack size 1lb 454gm, steel wire ropesling with both end loop 14mm dia into 02 mtrslength, detergent powder 1 kg, ht hexa bolt withnut m12 into 60 full thread, hex head bolt fullthread m10 into 60 along with plain washer springwasher and nut 8 point 8 grade, hex head bolt m8 1point 25 60, hexagon head bolt m12 1 point 75 50length along with lock washer nd 12, hex headbolt m10 1 pont 5 50mm with nut washer, safetyshoes buff leather with dual density slipresistance direct injected pu sole as per is 15298, hammer half kg with fibre or polymer handle, hammer 2 kgwith fibre or polymer handle, o ring kit mm size, scissor big, ss shim 20 mircometer, polyster sling 5t cap 3m length, polyester sling cap 5ton length 6mtrs, polyster sling 10 t cap 6m length, roundendless polyster sling 2 ton into 1 mtr effectivelength, umbrella, socket head screw m10 into 25 long, socket head screw with spring washer m16 into45mm ss, socket head screw with spring washerm30 into 110 mm ss, socket head screw with springwasher m24 into 60 mm ss, ball bearing 6205, deepgroove ball bearing single row no 6407, bearingskf 3307 atn9, cylindrical roller bearing singlerow nu 310, gas regulator for da, oxygen gasregulator, cutting nozzle 1by16, cutting nozzlesize 1by16 1by8 3by32, welding electrode mildsteels e6013 general purpose size 3 point 15mm into350mm in kg, cutting electrode e801 size 4 into 350mm 2kg 40nos, cutting electrode e 901 size 3 point15 mm, welding electrode mild steels e308 generalpurpose size 2 point 50mm into 350mm in kg, weldingelectrode mild steels e309 general purpose size 2point 50mm into 350mm in kg, welding electrode e7018 size 2 point 5 into 350 mm packet30 nos, weldingelectrode size diameter 3 point 15mm into length350mm e7018 no of welding rods per packet 50, welding holder, d spanner 65 mm, d spannerchrome plated polished head 16 17, ring spannerchrome plated polished head 18 19, d- spanner size22 into 24, ring spanner 22 24, center punch 6 inch, gas cutting torch cuttozen 5, socket 16 mm 1by2sq drive, socket 17 mm 1by2 sq drive, socket 18 mm1by2 sq drive, socket 19 mm 1by2 sq drive, socket 24 //bid details2 / 127 mm 1by2 sq drive, 1-inch male to 3by4 inch female impactsocket, 3by4 inch male to 1 inch female impact sockt, needle file set, v belt 117 b, v belt 118 b, hot air gunpower input 2000w 240v, electrical hand drillingmachine, die set, u clamp 1 inch, spring washer m16, hss drill bit 1mm, hss drill bit 3mm, hss drill bit 5mm, drill chuck 20mm, drill bit sleeve 1 13mm, hss drill bits10mm, drill bit 8mm, hss taper shank drill bit 14mm, hss drill bit 22mm, hss taper shank twist drill bit25mm, hss taper shank twist drill bit 30mm, 8 mmhss square bar 150mm length for lathe, 10 mm hsssquare bar 150mm length for lathe, key way tool size 12mm, inner internal carbide insert tool holders 250 mmlength for lathe, parting tool for lathe machine, v shapecutting tool, inside cutting toolangle grinder, 100 mm, angle grinder 1000/125, m/seal general purpose, tap set 3mm with handle, tap set m-4 hss, tap set m-5 hss, tap set 20 mm, tapset 64 mm, cutting wheel 125mm, cutting wheel 100mm, cut off wheel 14, painting brush 2, paintingbrush 75mm, painting brush 4, hss tap set 16 mmx2.0mm, loctite bonding 495, 20 ml vial, loctite 406adhesive 20 gm, grease gun bucket type heavytype with accesories 5kg, silicon sealant 0.280l, towel big plain, cotton hand gloves, pressuregauge 0 to 16 kg/cm2, 150 mm dial bottom entry, 1/2 bsp m, s.s.wire brush 6 row, hose clamp, plasticbucket 24 litre capacity, welding goggles black, safety googles, plastic mug/glass, number punches10 mm 1-9, cyrillic steel stamps, upper caseaphabet punch set, - 10 mm, teflon tape., rubberbush for flexible coupling size: od- 32 mm, id-19mm, length- 32mm, hacksaw frame 2bb 12, torchmounted flash back arrestor for oxyzen gas, model fr18, permanent marker, battery aa r6 drycell, impact socket, 3/4 sq. drive, 36 mm, extensionrod 3/4 drive, extension rod 3/4 drive, 200 mmlong, impact socket, 3/4 sq. drive, 30 mm, heavy dutysocket - 3/4 sq drive, 24 mm, s.s. socket size 27 mm, impact socket 32 mm, square drive size 3/4 inch, impact socket 41 mm, 3/4 square drive, socket 3/4x46 mm, long ball point allen key set9 pcs longlength:250, short length:100, carbon steel, oilheater 3kw, 230/415v ac, dial gauge with magneticbase least count 0.01mm, turn buckle eye to eyetype -1 tonne cpacity, anchor fastner nut bolt size:10 mm, anchor bolt 12mm, ms angle 25x25x3 mm, msangle 30x30x3, ms angle 50x50x5mm, chain pulleyblock 1 ton with 3 mtr fall, chain pulley block cap2ton x 3mtr, tool kit bag, araldite 180gm, rechargeable led torch light, extension board 5amp, power supply board, 15/16amp with extensioncord., 3 core pvc flexible copper cable 2.5 sq.mm., 3core pvc flexible copper cable 1.5 sq.mm, modularswitch socket combined 16 amp.piano type, plug top3 pin 6 amp, plug top 16/20 amp, 3 pin, hss drill bits, 6mm, hss drill bits, 8mm, hss drill bit 14mm, cottonwaste, white fibre squirrel, markin cloth, malmalcloth white, loctite 243 50ml35061000, ss hexaheadl bolt m16x106, half thread, caf gasket 1mmthick, gasket sheet 1.5 mm thick, caf gasket 2mmthick, caf gasket 2.5 mm thick, gasket sheet 3mmthick, asbestos gasket 3.5 mm thickness minimum1mtr wide, champion gasket 54 super, 4 mm thick, asbestos gasket sheet no-20, size 5 mm thick, gland //bid details3 / 127

Central Government/Public Sector

TRN :35285725 | 24 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for all in one computer, 60.5cm display full hd 1920 x 1080, 1tb hdd, i5 processor, 14 gen, 512 gb, m.2 2230, ssd, class 35, windows 11, wireless mouse and keyboard, 6kva online ups with 16 batteries, isolation transformer, inbuilt over voltage cut off devise, single phase with ground, all in one printer, a4 color smart tank, print, copy scantype, print speed up to 22 ppm black, usb and duplexprinting, digital wall clock digital 25.4cm x 25.4 cm digitalwall clock with glass, standard rectangle shape, 2 aabatteries, plastic case material, dustbin stainless steelperforated, 18 l capacity, a4 paper ream 75 gsm, mirrorless 4k dslr camera, 4k uhd and 4k 60p, up to 23fps continuous shooting with afae tracking, and 24.2 mppixels and wi fi, wireless mic with anc noise reduction, fitfor dslr camera, android and ios smartphones, compatible with android type c devises, tripod stand, 67inch foldable tripod stand, aluminum alloy legs, base platefor camera and mobile holder and 360 degree ball head, audio processor atc labs audio processor, perceptualsound max q101101, studio microphone shield mic popfilter, double layer shield, adjustable gooseneck, 360degree micro phone, flexible gooseneck holder, tripod micstand with fixed-length boom, foldable and adjustablemounting knob, sound forge audio editing software, text tospeech feature, storyblocks feature, 3d reverb feature, dsd import, dsd export file formats, dual cordless handheld mic for recording, 3.5 mm jack, 200ft range, selectablefrequency range, type c charging cable, anti slip ring, water dispenser hot, cold and normal, 20 l capacity, weight 15 kg, induction with pre-set cooking mode, crystalglass plate, digital display, touch control hot plate, antivirus quick heal total security one user one year

Central Government/Public Sector

TRN :35265377 | 20 Sep, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for bid number gem2025b6621645 dated 29-08-2025 bid document1 87 1 1 geyser 15 ltr, geyser 50 ltr, wc western type, flushsysten, wash basin piller type, filler cock mixcher typ, cupling nut wb, waste pipe wash basin, health faucet, towel stand, hand towel stand, pvc connection, paperholder, soap case dish, mirror 2x2, nahani jali, bib tape, angle type bib tape, ppr 25mm union, ppr 25mm brasssocket female, thread tape, float valve, pvc exhaust fan250mm, pvc exhaust fan 300mm, rivit, hand cutterblade, tile cutter blade, tapping screw adapter, screw 1inch, urinal pot, urinal angle valve with attachment andflange, urinal sapreader, puf water tank 1000 ltrs, showerassembly, water motor 1 hp, olive green paint, whitepaint, green paint, pvc pipe 110mm, pvc l bow 110mm, pvc t 110mm, pvc socket 110mm, pvc p trap 110mm, pvc solution, ppr pipe 32mm, ppr t 32mm, ppr l bow32mm, ppr socket 32mm, ppr union 32mm, ppr gatevalve 32mm, ppr tank nipple 32mm, aggrigate 20mm, ppr pipe 25mm, ppr socket 25mm, ppr t 25mm, ppr lbow 25mm, aluminium sheet, sink table top with coupling, angle cock, connection pipe 24 inch, connection pipe 18inch, wall mixer, cgi sheet 12 feet long, ridge cover 8 ftlong, tapping screw 55mm, cement, hollow block, brasssocket 25mm, ppr pipe 25mm, tank nipple 25mm, tile2x2, tile 300x300mm, tube light, ceiling rose, 15amp switch board combination, 5 amp switch board socketcombination, wire 1 point 5 sqmm, wire 2 point 5 sqmm, kadi kunda, handle, single switch board, casing cap, cppillar cock 15mm, mirror 2x1 point 5 feet, gate valve25mm, union 25 mm, ppr elbow 25mm, sand, acrylicsheet 8x5, security light 40 w, white cement, sink, pvcbib cock 15mm, gi socket 25mm, box beam pole 10 ft5x5x1 hs, black screw 1 inch, black screw 1 point 5 inch, black screw 2 inch, welding rod, interlocking tiles, steelgirder 3 mtr, square mild steel plate 300x300, tap hotand cold jaguar, western commode jaguar, brown paint, paint brush 2 inch, paint brush 3 inch, paint brush 4 inch, paint brush 6 inch, paint roller 6 inch, thinner, led tubelight 20 w 4 ft long, led bulb 18 w, pvc insulation cable 1sqmm flexible single core copper conductor, pvc insulationcable 1 point 5 sqmm flexible single core copper conductor, pvc insulation cable 2 point 5 sqmm flexible single corecopper conductor, pvc insulation service cable 10 sqmmaluminium conductor twin core, switch board with 15 ampsocket, switch board with 5 amp socket, modular switchsocket combination 3 or 5 pin 16 amp with box, modularsocket 3 pin 10 amp, modular socket 3 pin 20 amp, pvcinsulation tape 2 cm wide 10 mtr long, modular switch oneway 6 amp, ppr pipe 3 layer dia 25mm 3 mtr long, pprpipe 3 layer dia 32mm 6 mtr long, ppr pipe 1 point 5 inch20 ft long, ppr pipe clip 25mm, ppr pipe clip 32mm, pprelbow 32mm, pvc elbow 4 inch, pvc pipe 4 inch 3 mtr long, adhasive solution sr-998 for jointing of insulation, nutbolt 12mm dia 60mm long with 3mm thick to steel washersfor ms flat with laips, tile cutter machine, false ceilingsupport 80 x 40 mm and 200mm long, glass cutter blade, change over switch 63 amp single phase, power extensionboard, immergation rod 1500 w, conduct pipe, mcb 4pole, tape steel, tape plastic, pvc tape

Central Government/Public Sector

TRN :35308718 | 20 Nov, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for supply of handle for water tank flap arrgt. acp for amrit bharat coaches to pl no- 33617144..

Related Searched Keywords : plastic case

List of plastic-case Tenders

Tender for supply of handle for water tank flap arrgt. acp for amrit bharat coaches to pl no- 33617144..

Get plastic case Tender Alert...

Related Searched Keywords : plastic case

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us