Filters

List of latest Grouting Tenders in Indian Tenders. Click on any Grouting Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for Grouting Tenders.

All-Tenders (137)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :19088468 | 01 Oct, 2020

Tender Value : 29.99 Lacs

Ahmedabad - Gujarat

Tender for road up to grouting work in different-different places of vejalpur ward in south west zone.

corporations/Associations/Others

TRN :19092590 | 07 Oct, 2020

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for rate contract for civil work items- earth work in excavation by manual means in trenches for foundations, drains, cables etc.not exceeding 1.5 mtr.in width and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth up to 1.50 mtr. incl. disposed earth is to be leveled and neatly dressed in all kinds of soil. supply and filling of earth in layers not exceeding 20 cm in depth, rolling each layer with power road roller of 8-10 tonnes, incl dressing, watering, leveling and all carriages up to site of work complete. filling available excavated earth excl. rock in trenches, plinth, sides of foundation etc. layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 50 m. providing & laying stone soling hand packed incl. ramming, watering, and all carriages up to site of work complete. providing & laying in position cement concrete of specified grade excl. the cost of centering & shuttering. all work upto plinth level a1:4:8 1 cement: 4 coarse sand: 8 graded crushed stone agg. 40mm nominal size b1:3:6 1 cement: 3 coarse sand: 6 graded crushed stone agg. 40mm nominal size c1:2:4 1 cement: 2 coarse sand: 4 graded crushed stone agg. 20mm nominal size providing & laying in position specified grade of reinforcement concrete excl. the cost of centering & shuttering, finishing and reinforcement. all work upto plinth level a1:2:4 1 cement: 2 coarse sand: 4 graded crushed stone agg. 20mm nominal size b1:1.5:3 1 cement: 1.5 coarse sand: 3 graded crushed stone agg. 20mm nominal size reinforcement cement concrete work in walls any thickness, incl. attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. a1:2:4 1 cement: 2 coarse sand: 4 graded crushed stone agg. 20mm nominal size b1:1.5:3 1 cement: 1.5 coarse sand: 3 graded crushed stone agg. 20mm nominal size providing & laying in position cement concrete of specified grade excl. the cost of centering & shuttering. all work upto plinth level.plum concrete using 20 % plums 1:3:6 1 cement:3 coarse sand:6 graded crushed stone agg. 40mm nominal size incl.all carriages complete. bp/f up to floor-5 level precast cement concrete hallow blochs including hoisting and setting in position with cement morter 1:31cement:3course sand, cost of required centering and shuttering complete. reinforcement for r.c.c. work incl. straightening, cutting, bending, placing in position & binding all complete mild steel & medium tensile steel bars. providing and laying damp proof course with cement concrete 1:2:4 1 cement : 2 course sand : 4 graded crushed stone aggregate 20 mm nominal size a 50 mm thick b 40 mm thick centering & shuttering including strutting, propping, etc. & removal of form work for:- a foundations, footings, bases of columns etc. for mass conc. bwalls any thickness incl. attached pilasters, buttresses, plinth and string courses etc. c suspended floors, roofs, landings, balconies and access platform. dlintels, beams, plinth beams, girders, bressumers and cantilevers. making plinth protection 50 mm thick of cement concrete 1:3:6 1 cement:34 coarse sand:6 graded stone agg. 20mm nominal size over 75 mm bed ofdry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth. brick work with f.p.s. bricks of class designation 75 in super structure above plinth level up to floor five level by manual means in cement mortar 1:6 1 cement: 6 coarse sand brick work with f.p.s. bricks of class designation 75 in super structure above plinth level up to floor five level by manual means in cement mortar 1:6 1 cement: 6 coarse sand b labour only bricks available at site.incl. all carriages up to site of work complete. chalf brick masonry in cement mortar 1:4 1 cement : 4 course sand with bricks of class designation 75 in super structure above plinth level up to floor v level random rubble masonry in cement mortar 1:6 1 cement:6 course sand with hard stone from quarry in foundation and plinth including leveling up with cement concrete 1:6:12 1 cement:6 coarse sand:12 graded stone agg. 20mm nominal size at plinth level bdry random rubble masonry in foundation and plinth using quarry stone with bond stone. providing and laying fine chissel dressed. devri stones up to floor five level in cement mortar 1:6 1 cement:6 course sand incl. pointing with white cement mortar 1:2 1white cement:2 stone dust with an admixture of pigment matching the stone shade, incl. all carriages up to site of work complete cornice of desired design and size. marble work gang saw cut polished and machine cut for wall lining veneer work in cement mortar 1:3 1cement:3 course sand incl. pointing with white cement mortar 1:2 1 white cement:2 marble dust with an admixture of pigment to match the marble shade :to be secured to the backing by means of cramps, which shall be paid for separately raj nagar plain white marble / udhaypuri green marble / zebra black marble aarea of slab up to 0.50 sqm. 18 mm thick. barea of slab over 0.50 sqm. 18 mm thick. providing and fixing gang saw cut granite work mirror polished pre moulded and pre polished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of reqd. size and approved shade, color and texture laid over 20 mm thick base cement mortar 1: 4 1ccement:4 course sand with joints treated with white cement, mixed with maching pigment, epoxy touch ups, incl. rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels raj nagar plain white marble / udhaypuri green marble / zebra black marble aarea of slab up to 0.50 sqm 18 mm thick. barea of slab over 0.50 sqm 18 mm thick extra for providing edge moldings to 18 mm thick marble stone counters, vanities etc. over above items incl. machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer-in-charge. a marble work. b granite work. mirror polishing on marble work where ever required to give high gloss finish complete. cement concrete flooring 1:2:4 1 cement: 2 coarse sand: 4 graded stone agg. 20mm nominal size -crushed finished with a floating coat of neat cement incl. cement slurry, but excl. the cost of nosing of steps etc. complete a 50mm thick. crushed. b 40mm thick crushed. providing and laying vitrified floor tiles of size 60 x 60cm thickness to be specified by the manufacturer with water absorption less than 0.08% and conforming to is:15622 of approved make in all colours and shades, laid on 12 mm thick chemical of standard manufacture including grouting the joints with white cement and matching pigments and all carriages complete. providing & fixing ist quality ceramic glazed wall tiles confirming to is: 13753 of minimum thickness 5mm of approved make like nitco, orient, somany, kajaria or equivalent make in all color shades of any size as approved by the engineer in charge in walls, dados etc over 12mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand & jointing with grey cement slurry @ 3.3 kg/sqm incl. pointing in white-cement mixed with pigment of matching shade complete.600mmx300mm providing and fixing ceramic glazed floor tiles 300x300mm thickness to be specified by manufactures of ist quality conforming of is: 13755 of nitco, orient, somany kajaria, or equivalent make in colour such as white, ivory, grey, fume red brown laid on 20mm thick bed of cement mortar 1:4 1 cement: 4 coarse sand including pointing the joints with white cement and matching pigment etc compete. 15 mm cement plaster on the rough side of single or half brick wall of mix. a1 : 4 1 cement : 4 course sand b1 : 6 1 cement : 6 course sand rough cast plaster up to 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size dashed over and incl. the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 1 cement:4 course sand and top layer 10 mm cement plaster 1:3 1 cement:3 fine sand mixed with 10% finely grounded hydrated lime by volume of cement ordinary cement finish using ordinary cement providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. pointing on brick work with cement mortar 1:3 1 cement:3 fine sand. a flush pointing b ruled pointing c raised and cut pointing pointing on stone work with cement mortar 1:3 1 cement:3 fine sand. a flush pointing b ruled pointing c raised and cut pointing white washing with lime to give an even shade. new work athree or more coats b satna lime wash on walls one coat distempering with dry distemper of approved brand and manufacture two or more coats and of reqd. shade on new work, over and incl. priming coat of whiting to give an even shade distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. new work two or more coats over and incl. priming coat with cement primer. distempering with ist. quality acrylic washable distemper ready made of approved manufacture and of reqd. shade / colour complete as per manufacturer’s specifications. atwo or more coats on new work. bone or more coats on old work. applying one coat of water thinable cement primer of approved brand and manufacture on wall surfaces. cement primer. finishing walls with water proofing cement paint of approved brand and manufacture and of reqd. shade to give an even shade. a new work two or more coats applied @ 3.84 kgs / 10 sqm. b old work one or more coats applied @ 2.20 kgs / 10 sqm over priming coat of primer applied @ .080 liters / 10 sqm complete incl. cost of priming coat. applying priming coats :- a with ready mixed pink or grey primer of approved brand and manufacture on wood work hard and soft wood. b with ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood c with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel works. painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. a new steel work two or more coats b old steel work one or more coats finishing with epoxy paint two or more coats at all locations prepared and applied as per manufacturer’s specifications incl. appropriate priming coat, preparation of surface, etc. complete. a on steel work. b on concrete work. finishing walls with textured exterior paint of required shade on new work two or more coats applied @ 3.28 litre / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm painting on g.s sheets with synthetic enamel paint of approved brand and manufacture of reqd. color to give an even shade. new work two or more coats incl. a coat of approved steel primer but excl. a coat of mordant solution. wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work. painting with almunium paint of approved brand and manufacture to give an even shade two or more coats on new work. floor painting with floor enamel paint of approved brand and manufacture of reqd. colour to give an even shade two or more coats on new work. melamine polishing on wood work one or more coats floor polishing on masonry or concrete floors with wax polish of the approved brand and manufacture. varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. repairs to plaster with cement mortar 1:4 1 cement: 4 course sand of thickness 12 mm in patches of area 2.5 sqm. and under incl. cutting the patch in proper shape and preparing and plastering the surface of the walls complete incl. disposal of the dumping ground within 50 mts. lead. renewing glass panes, with putty and nails wherever necessary.a float glass panes of thickness 4 mm b float glass panes of thickness 5.5 mm renewing glass panes, with wooden fillets wherever necessary.a glass panes weighing 10 kg / sqm b glass panes weighing 13.75 kg / sqm racking out joints in lime or cement mortar and preparing the surface for repainting or replastering incl. disposal of rubbish to the dumping ground within 50 mts. lead taking out doors, windows and clerestory windows steel or wood including stacking within 50 metres lead : aof area of 3 sq. metres and below bof area beyond 3 sq. metres dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and and 5 meters height including stacking the material within 50 meters lead. of sectional area 40 sq. centimetres and above dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead of : a g.s. sheet b asbestos sheet dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 mts lead. dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 mts lead. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mts. lead preparation of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth up to 50 meters. supplying and laying water bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including cost of stone aggregate, screenings, kankar, moorum and red bajri etc. : a sub base with stone aggregate 90 mm to 45 mm including stone screenings 13.2mm size b base course with 63 mm to 45 mm size including stone screening 13.2 mm size c base course with 53 mm to 22.4 mm size including stone screenings 11.2 mm size supplying and stacking of good earth at site, excluding carriage. providing and fixing g.i chain link fabric fencing of reqd. width in mesh size 50 x 50 mm incl. strengthening with 2 mm dia. wire or nuts, bolts and washers as reqd. complete as per direction of engineer-in-charge.made of g.i wire of dia. 4 mm providing and fixing of 50mm thick pre-cast interlock tile flooring, jointing with dry sand on top and cement concrete m-15 grade on ends including all carriage lead and lifts complete. p/f water closet squatting pan indian type w.c pan with 100 mm sand cast iron p or s trap, 10 litre low level p.v.c flushing cistern including flush pipe of approved makemanually controlled device handle lever confirming to is:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. along pan pattern white vitreous china w.c pan of size 580 mm. borissa pattern white vitreous china w.c pan of size 580 x 440 mm with integral type foot rests. p/f white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with c.i /m.s brackets standard size of g.i flush pipe and c.p brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. one urinal basin with 5 liter p.v.c white automatic flushing cistern of approved quality. p/f white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. p/f salem stainless steel a isi 304 18/8 kitchen sink as per i.s:13983 with c.i brackets and stainless steel plug 40 mm including painting the fitting and brackets, cutting and making good the walls wherever required. kitchen sink with drain board.610 x 460 x 200 mm p/f white vitreous china pedestal type european type/wash down type water closet pan. p/f 10 litre capacity white colour p.v.c low level flushing cistern with manually controlled device handle lever confirming to i.s:7231, with all fittings and fixtures complete. p/f white vitreous china wash basin including making all connections but excl. the cost of fittings. flat back wash basin of size 630 x 450 mm p/f 600 x 450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete. p/f 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminum angle frame with c.p brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete. p/f c.p brass toilet paper holder. p/f g.i pipe concealed work including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall. a15 mm dia b 20 mm dia. p/f gun metal gate valve with c.i wheel of approved quality screwed end 25 mm dia. p/f ball valve c.p brassof approved quality complete. a15 mm dia b20 mm dia. p/f fallowing c.p brass fittings of approved manufecture. a 15 mm dia bib cock b 15 mm dia angle valve c 15 mm dia wall mixer d 15 mm dia. basin mixer e 15 mm dia stop cock f shower with arm g soap case h 600 mm long towel rod i towel ring only for kashmir province for the year 1920 21 sicop

Central Government/Public Sector

TRN :19077137 | 05 Oct, 2020

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for procurement of grouting cement for mgr

corporations/Associations/Others

TRN :19079493 | 01 Oct, 2020

Tender Value : 59.21 Lacs

Ahmedabad - Gujarat

Tender for road grouting work sarkhej gamtal, sarkhej okaf area, makrba area, and corporate area, and diff.places tp road in sarkhej ward in south west zone amc.

Central Government/Public Sector

TRN :19080862 | 15 Oct, 2020

Tender Value : 0

Bokaro - Jharkhand

Tender for supply of resin based grouting material for bf for repairing of stack of blast furnace on supply and application basis

Central Government/Public Sector

TRN :19081530 | 17 Oct, 2020

Tender Value : 0

Bokaro - Jharkhand

Tender for supply of grouting material for blast furnace hearth on supply and application basis

corporations/Associations/Others

TRN :19061990 | 01 Oct, 2020

Tender Value : 49.60 Lacs

Ahmedabad - Gujarat

Tender for grouting work at different places and other different t.p.road in jodhpur ward in south west zone in amc.

State Government

TRN :19058061 | 29 Sep, 2020

Tender Value : 2.00 Lacs

Jammu - Jammu And Kashmir

Tender for construction of cement concrete grouting on damaged spots at 3rd stage canal from rd 4750 m to 4890 m of tral lift irrigation scheme.

corporations/Associations/Others

TRN :19041240 | 28 Sep, 2020

Tender Value : 2.00 Lacs

Moradabad - Uttar Pradesh

Tender for safe carriage of the following material from store centre majhola/jes store to work site including loading and unloading at both ends :- 13 mtr./11 mtr./9 mtr./8.5 mtr. long pcc/st poles. acsr weasel/dog conductor. 11/0.4 10 kva transformers. 11/0.4 25 kva transformers. 11/0.4 63 kva transformers. 11/0.4 100 kva transformers. lt a.b.c. cable. 11 kv xlpe cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x180 sq.mm. etc. line material such as cross-arms, pin insulators, guarding angles, guarding wire, disc insulators and cable jointing kits etc. ct/pt unit 11 kv pilfer proof metering cubical. dismantling of the line by :- removing of acsr weasel/dog conductor from all phases on line, making bundle and stacking at a safe place. uprooting of 13 mtr./11 mtr./9 mtr./8.5 mtr. long pcc/st poles. for 11 kv line, single support 13/11/9/8.5 mtr. long st/pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support pole, providing and laying of stone pad 300x300x75mm. in the bottom of the pit. erection of support pole complete with fixing of 11 kv v-type cross-arms and all other accessories by providing stone pad, cross arms, holding clamps, f-bracket and nuts & bolts etc. as per respo norms. for 11 kv line, double pole structure with 13/11/9/8.5 mtr. long st/pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support pole. erection of support pole complete work by fixing of d.p. clamps and all other accessories. the work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per respo norms. construction of tri-pole structure on st poles including fabrication of ms angle channel, cross bracing etc. with proving and fitting of all type of clamps made of ms flat of size 65x8mm. with nuts, bolts & washer, grouting of pole in size of 220x45x45 cm. with cement, sand and brick ballast in the ratio of 1:4:8, as per respo norms. grouting of poles single line support :- grouting of support in cc 1:4:6 cement, sand and 40 mm. brick ballast grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per respo norms. grouting of stay rods 20x1800mm. including all works of excavation, cement concrete in size of 0.60x0.60x0.30m in the ratio of 1:4:6 cement, sand and 40 mm. brick ballast including back filling of soil and proper ramming etc. fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc. earthing of support with ms earth rod of 20x2500mm. long including excavation of pit and driving ms rod 3.0m apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of g.i. wire no.6 swg tightening with nuts and bolts. laying, sagging, stringing and binding of acsr weasel/ dog conductor with all other accessories on pole as per respo norms. laying, sagging, stringing and binding of abc conductor with all other accessories on pole as per respo norms. laying of 11 kv xlpe cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x180 sq.mm. and making connections as per respo norms. filling and fixing of 11 kv outdoor/indoor type cable jointing kits as per respo norms. construction of 11 kv underground line :- digging of cable trench in size of 0.45mtr.x1.05 mtr. laying of 11 kv 3x70/120/185 sq.mm. cable in the trench. providing 150 mm. sand cushion beneath and 150 mm. above the cable. the cable shall be duly protected by 1st class bricks, two on either side and third on top of the cable, laid in the series one after the other. refilling and ramming of the left out soil, closing and trench and levelling. spare cable shall be left in the loop shape at both ends, including providing of all required material and t&p. providing and fixing of danger board with clamp, nut and bolts. providing and fixing of number plate with clamp, nut and bolts. providing and wrapping of barbed wire on 11 kv pcc poles at a height of 2.75 mtr. from the ground level as per respo norms. fitting of 11 kv pilfer proof metering cubical including making proper connections. guarding of 11 kv line with g.i. wire as per respo norms. mounting and fixing of 11 kv ct/pt unit on double pole including making proper connections. fixing of 11 kv 3ph-4w tvm meter at double pole including making proper connections. mounting and fixing of 10 kva transformer on pole including making proper connections. mounting and fixing of 25 kva transformer on double pole including making proper connections. mounting and fixing of 63 kva transformer on double pole including making proper connections. mounting and fixing of 100 kva transformer on double pole including making proper connections. providing g.i. pipe 6” dia for inserting 11 kv xlpe cable for safety of cable on single/double pole by providing and fixing of ms clamp, nuts and bolts. fixing and fitting of single/three phase distribution box on pole for making consumers cable connection complete work. carriage of following from work site to store centre majhola including loading and unloading at both ends :- 13 mtr./11 mtr./9 mtr. long st poles. acsr weasel/dog conductor/m.s. scrap. ct/pt unit. 11 kv pilfer proof metering cubical.

corporations/Associations/Others

TRN :19041247 | 15 Oct, 2020

Tender Value : 2.00 Lacs

Moradabad - Uttar Pradesh

Tender for safe carriage of the following material from store centre majhola/jes store to work site including loading and unloading at both ends :- 13 mtr./11 mtr./9 mtr./8.5 mtr. long pcc/st poles. acsr weasel/dog conductor. 11/0.4 10 kva transformers. 11/0.4 25 kva transformers. 11/0.4 63 kva transformers. 11/0.4 100 kva transformers. lt a.b.c. cable. 11 kv xlpe cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x180 sq.mm. etc. line material such as cross-arms, pin insulators, guarding angles, guarding wire, disc insulators and cable jointing kits etc. ct/pt unit 11 kv pilfer proof metering cubical. dismantling of the line by :- removing of acsr weasel/dog conductor from all phases on line, making bundle and stacking at a safe place. uprooting of 13 mtr./11 mtr./9 mtr./8.5 mtr. long pcc/st poles. for 11 kv line, single support 13/11/9/8.5 mtr. long st/pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support pole, providing and laying of stone pad 300x300x75mm. in the bottom of the pit. erection of support pole complete with fixing of 11 kv v-type cross-arms and all other accessories by providing stone pad, cross arms, holding clamps, f-bracket and nuts & bolts etc. as per respo norms. for 11 kv line, double pole structure with 13/11/9/8.5 mtr. long st/pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support pole. erection of support pole complete work by fixing of d.p. clamps and all other accessories. the work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per respo norms. construction of tri-pole structure on st poles including fabrication of ms angle channel, cross bracing etc. with proving and fitting of all type of clamps made of ms flat of size 65x8mm. with nuts, bolts & washer, grouting of pole in size of 220x45x45 cm. with cement, sand and brick ballast in the ratio of 1:4:8, as per respo norms. grouting of poles single line support :- grouting of support in cc 1:4:6 cement, sand and 40 mm. brick ballast grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per respo norms. grouting of stay rods 20x1800mm. including all works of excavation, cement concrete in size of 0.60x0.60x0.30m in the ratio of 1:4:6 cement, sand and 40 mm. brick ballast including back filling of soil and proper ramming etc. fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc. earthing of support with ms earth rod of 20x2500mm. long including excavation of pit and driving ms rod 3.0m apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of g.i. wire no.6 swg tightening with nuts and bolts. laying, sagging, stringing and binding of acsr weasel/ dog conductor with all other accessories on pole as per respo norms. laying, sagging, stringing and binding of abc conductor with all other accessories on pole as per respo norms. laying of 11 kv xlpe cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x180 sq.mm. and making connections as per respo norms. filling and fixing of 11 kv outdoor/indoor type cable jointing kits as per respo norms. construction of 11 kv underground line :- digging of cable trench in size of 0.45mtr.x1.05 mtr. laying of 11 kv 3x70/120/185 sq.mm. cable in the trench. providing 150 mm. sand cushion beneath and 150 mm. above the cable. the cable shall be duly protected by 1st class bricks, two on either side and third on top of the cable, laid in the series one after the other. refilling and ramming of the left out soil, closing and trench and levelling. spare cable shall be left in the loop shape at both ends, including providing of all required material and t&p. providing and fixing of danger board with clamp, nut and bolts. providing and fixing of number plate with clamp, nut and bolts. providing and wrapping of barbed wire on 11 kv pcc poles at a height of 2.75 mtr. from the ground level as per respo norms. fitting of 11 kv pilfer proof metering cubical including making proper connections. guarding of 11 kv line with g.i. wire as per respo norms. mounting and fixing of 11 kv ct/pt unit on double pole including making proper connections. fixing of 11 kv 3ph-4w tvm meter at double pole including making proper connections. mounting and fixing of 10 kva transformer on pole including making proper connections. mounting and fixing of 25 kva transformer on double pole including making proper connections. mounting and fixing of 63 kva transformer on double pole including making proper connections. mounting and fixing of 100 kva transformer on double pole including making proper connections. providing g.i. pipe 6” dia for inserting 11 kv xlpe cable for safety of cable on single/double pole by providing and fixing of ms clamp, nuts and bolts. fixing and fitting of single/three phase distribution box on pole for making consumers cable connection complete work. carriage of following from work site to store centre majhola including loading and unloading at both ends :- 13 mtr./11 mtr./9 mtr. long st poles. acsr weasel/dog conductor/m.s. scrap. ct/pt unit. 11 kv pilfer proof metering cubical.

Related Keywords : grouting

List of latest Grouting Tenders in Indian Tenders. Click on any Grouting Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for Grouting Tenders.

Tender for road up to grouting work in different-different places of vejalpur ward in south west zone.

Tender for procurement of grouting cement for mgr

Tender for road grouting work sarkhej gamtal, sarkhej okaf area, makrba area, and corporate area, and diff.places tp road in sarkhej ward in south west zone amc.

Tender for supply of resin based grouting material for bf for repairing of stack of blast furnace on supply and application basis

Tender for supply of grouting material for blast furnace hearth on supply and application basis

Tender for grouting work at different places and other different t.p.road in jodhpur ward in south west zone in amc.

Tender for construction of cement concrete grouting on damaged spots at 3rd stage canal from rd 4750 m to 4890 m of tral lift irrigation scheme.

Get grouting Tender Alert...

Related Keywords : grouting

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us