Filters

List of latest aluminum-fitting Tenders in Indian Tenders. Click on any aluminum-fitting Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-fitting Tenders.

All-Tenders (355)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :19043944 | 05 Oct, 2020

Tender Value : 50.00 Lacs

Surat - Gujarat

Tender for supply of educational and physical equipment in government/semi government school, hostel and educational organization in surat district - music set, mike set - dholak dorivala 16” size, 5” & 7.5”d, tabla 9” & 5” d with bag, manjira pittal model, kirtal sagvan wood, harmonium palitana sur with bag, side drum 13.6” with belt and stick, beaugal pure copper, wt 0.300 gm, khanjri 10” plastic screen, nut bolt system, gugra 6”, stainless steel unit 1, drum 24” with belt and stick, flute pittal, microphone 59 xlr, gs mike stand big, amplifier 120 watt, cordless mike aum 490, speaker with 120 watt, 12” with tutor, sports kit - cricket bat, cricket ball, cricket stump with bells, volley ball, volley ball net, football, flying disc 9”, shot put, carom board with striker, cookies and powder, badminton, shuttle coke, skipping rope, air pump, chess with coin, nylon bag for sports kit, whistle with thread, smart class room equipment - interactive board with operating system, projector, laptop, printer, keyboard, mouse, ups, hdmi cable, headphone with mike, scanner, pen drive, usb fan, usb light with installation, science kit/model lab/maths model kit/ map chart - science kit, chemistry lab equipment, physics lab equipment, biology lab equipment, maths model kit, maps chart, language lab - colour block 60 mm with fitting, picture block 60 mm with fitting, toys and play kit - ring toss, jingle bell roller, linking toys, twin teddy toys, dafli, ringing ball, counting frame, new business, snakes and ladder, carry bowling pin, small carom board, cricket set, small hockey, skipping rope, timer, teddy ring, basket ball set, musical drum, flying disc, table tennis, flower puzzle, vegetable puzzle, fruit puzzle, transport puzzle, teddy rider, xylophone, baby mission car, baby tricycle, pre-education stand, alpha genius board, education train, slide 6 steps, swing, flooring rubber mat, baby chair, height chart, jumbo giraffe radeon, crescent table, pony 3 way rocker, study table, office table, plastic chair, sanskrutik dress, sports dress, night dress, sweater with winter cap, hand gloves and shocks for boys, track suit, education software, ceramic emboss education chart, kitech equipment - aluminium tapelu, steel masala dabba set, aluminium tapelu 20” d, size 40”, 9 gauze with dhakan aluminium tapelu 19” d, size 38”, 9 gauze with dhakan steel masala dabba set 6 contener, 13 x 9 wgt 3.600 kg steel kadchi regular size, 3 no. steel kamandal 14” size, 970 gm wt, without solder steel tapeli 28” size, 18 gauze, 4 kg wt steel bowl 18” size, 22 gauze, 800 gm wt steel bhatiya regular size, 3 no. steel parat 36” size, 18 gauze, 6 kg wt steel chipiya regular size, 3 no. aluminum parat 36” size, 16 gauze, 3.3 to 3.4 kg wt, without solder aluminum pavali with dhakan 24” size, 16 gauze, 14 to 15 kg wt steel pavali with dhakan 38” size, 22 kg wt, 200 ltr capacity iron tavo 24 size, 3 mm, 7.500 k.g wgt expected iron taletho full size iron zaro 11” d, 2’ long iron zaro 9” d, 1.5’ small patli and velan for roti making aluminium pip 10 kg capacity, size 8”, dimension 8x8x12.5, 20 gauze, 0.8 kg wt aluminium pip 25 kg capacity, size 11”, dimension 11x11x17.5, 20 gauze, 1.4 kg wt aluminium pip 50 kg capacity, size 14”, dimension 14x14x23, 20 gauze, 3 kg wt aluminium pip 100 kg capacity, size 16”, dimension 16x16x29, 20 gauze, 4.5 kg wt aluminium pip 200 kg capacity, size 20”, dimension 20x20x35, 20 gauze, 8 kg wt galvanized pip 10 kg capacity, size 8”, dimension 8x8x12.5, 20 gauze galvanized pip 25 kg capacity, size 11”, dimension 11x11x17.5, 20 gauze galvanized pip 50 kg capacity, size 14”, dimension 14x14x23, 20 gauze galvanized pip 100 kg capacity, size 16”, dimension 16x16x29, 20 gauze galvanized pip 200 kg capacity, size 20”, dimension 20x20x35, 20 gauze gas kit with pipe line electric sagadi standard single chula with regulator and pipe fitting, 15”x15”, weight 8 kg aluminium idly cooker weight 3.800 to 3.900 kg, 48 idly cooking capacity at once iron kadhai size 22” dish stand:- width 4’, height 5’, deep 15” 105 dish weight 21 k.g, 20x20 mm pipe road 5 mm kg steel dish 22 gauze, 8.5” d, steel vatki 22 gauze, 3.5” size, steel vatki 22 gauze, 3.5” size, steel glass 22 gauze, 7.5” size, steel spoon 6” size, industrial mixer, dianing table, writing board and school bench, school kit - school bag, note book, compass box, pencil box with rubber and sharpener, ball pen, drawing book, water colour, sketch pen, iron bed, bunk bed, bunk bed with locker, cotton mattresses cover, singal bed, pillow with cover, bed sheet, charsa, terry wool blanket, mosquito net, cotton mattresses, aasanpatta, mattresses set, ward care, wooden fire bamba, electrical items - led night lamp, cctv camera, tube light, electric weight scale, dough kneading machine, roti maker machine, fully automatic composting machine, solar fanas top portable handle, compass, usb smart charge, fm radio, solar panel, science kit : magnifying glass, plane slide, test tube, condession tube, condession tube stand, water jar, different type of magnate, doctor thermometer, compass, spirit lamp, vapor bowl, water volta meter, biker 100 ml, test tube holder, wire gauze, tripod stand, biker 50 ml, flask 250 ml, glass funnel, delivery tube, concentric tube, rubber cork with one whole, thermometer, microscope standard modal isi mark, telescope, glass rod, magnesium bar, convex mirror, concave mirror, spring balance, mirror stand, measuring cylinder, ebonite rod, pipette, biuret, prizam, overflow vessels, litmus paper, plastic skeleton in sowcase, stop watch, solar system model, ears model, skin model, cardiovascular system, digestive system, eyes model, respiratory system, heart model, caustic soda, hydrochloride acid, phenophythane solution, chemistry lab equipments - asitaldihyde sl 500 ml, asitamide sl acotamide 250 grm, asetic acid sl acctic acid 500 ml, asiton acotene 500 ml, aluminium cloride sl 250 grm, aluminium salphate sl 500 grm, amoniya solution sl 500 ml, amoniya carbonate sl 500 grm, amoniya molibdet sl 100 grm, amoniyaoczolet sl 500 grm, enilin sl aniline 500 ml, b nepthol sl 250 grm, beriyumcloraide sl berium 500 grm, beriyum naitrate sl berium 500 grm, benzaldihide sl 500 ml, benzamaid sl 250 ml, benzin sl 500 ml, benzoic acid sl 500 ml, benzinealchole sl 500 ml, byurate 25 mili borosilicate glas with pitch clip, barner with stop cock heavy base parko, calcium salphate sl 500 grm, carbone tetracloride sl 500 ml, clorine water sodium hypo clorite solution sl 500 ml, clorobenzin sl 500 ml, cloroform sl 500 ml, cobalt cloride paper 1 pcket, conical flaks 100 miliborosil, coparmatel100 grm, coparsalphate sl 500 grm, dai finailemain sl 250 grm, dai sodium haydrizanothophosphate sl 500 grm, ithailasitate sl 500 ml, fehling solution - a sl 500 ml, fehling solution - b sl 500 ml, fericcloride sl 500 grm, ferashamoniyasalphate sl 500 grm, ferashsalphate sl 500 grm, ferashsalphaite stick sl 1 kg, glucosdectoz sl 500 gm, haydocloric acid sl 500 ml, hydrozanperocside sl 500 ml, lade esitate sl 500 grm, lade naitrate sl 500 grm, litmas paper blue color 1 pckt, litmas paper red color 1 pckt, meta dai naitrobenzin sl 500 grm, mithenol sl 500 ml, mithailasitate sl 500 ml, asitaldihyde sl 500 ml, nepthelin sl 500 grm, neslars reagent sl 125 ml, naitrict acid sl 500 ml, nitrobenzin sl 500 ml, oczolic acid sl 500 grm, p.h paper qvolizance1 pckt, finopthelin solution sl 125 ml, picrick acid sl 500 grm, pipet 10 mili borosiliket glas1 pcs, potesiumdaicromet sl 500 grm potesiumferisainaid sl 250 grm potesiumferosinaid sl 500 grm potesiumhydrocsaidfleks sl 500 grm potesiumayodaid sl 100 grm potesiumoczolet sl 500 grm potesiumpermegnet sl 500 grm potesiumsalphate sl 500 grm resorsinol sl 100 grm silver naitret sl 25 grm soidum bycarbonet sl 500 grm sodium carbonet sl 500 grm sodium cloride sl 500 grm sodium cobaltinatrait sl 100 grm sodium hydrocside sl 500 grm sodium metal sl 100 grm sodium naitrocperocsaid sl 100 grm sodium salfaid sl 500 grm salfuric acid sl 500 ml tartric acid 250 grm tolyuin sl 500 ml yuriya sl 500 grm, concave mirror 3 convacs lens 3 convacs mirror 3 digital emitor digital voltmeter gelveno meter glas slab 100 x 60 x 18 aluminium ark brass ark lens stand v shape plastic micrometer 25mm stainless steel mili a meter 100 mili ampiar mili a meter 10 miliampiar mili a meter 500 miliampiar plain mirror strip with stand rajistance box .1 - 50ohm rajistance box 10000 - constant coil reostate 1000 ohm reostate 2250 ohm sonometeraluminium fitting stop clock vinus npn transistor aprates built in type jaysee set verniyar kelipars verniyar kelipars ss voltmeter 10 wolt yung module apratesvarniyars type set genre dayodaprates built in type jaysee yung module apratesvarniyars type set genre dayodaprates built in type jaysee, biology lab equipments - asotokamin sl 100 ml benedict reagent sl 500 ml benzaldihide sl 500 ml byurate reagent sl 125 ml clorin water sodium hypo clorite solution sl 500 ml cometography paper sheet cover slip 1 pckt iosin solution sl 125 ml filter paper supi. 1 pckt formaldi hide sl 500 ml glasstatar grams ayodin solution nc 125 ml lectofinol cotton blue solution suleb 500 ml leshmaan stain solution sl 250 ml mithail orange solution sl 125 ml junior medical microscophavey body with movable condensar microscopic slide : sambhajan 12 no set microscopic slide : ardhikaran 5 no set microscopic slide : std 11 25 no set microscopic slide : std 11 semester - 2 30 slide set microscopic slide : std 12 30 no set milance reagent nc 125 ml pelediyum cloride solution 1 grm. petridish 3 plastic finol red powder sl 10 grm fiinopthelin solution sl 125 ml sefanin solution nc 125 ml soidumhypobromait sl 500 ml std - 11 biology charts 17 no set semester - 1 std - 11 biology charts 27 no set semester - 2 part - 1 std - 12 biology charts 26 no set semester - 4 std - 12 biology charts 30 no set for semester - 3 sucroz sl 500 grm sudan - 3 powder quolicem 25 grm yuriyaqvolicem 500 grm, maths model kit, earth globe big, earth globe small, genetic box, asia map, world map, gujarat map, district map, asia geographic map, world geographic map, india geographic map, gujarat geographic map, india national road map, science map, agriculture map, animals map, vegetation map, map of country leaders, national anthem jana gana mana, nation song vande mataram, national map, the human body map of the working condition of the organs

State Government

TRN :19047914 | 29 Sep, 2020

Tender Value : 14.73 Lacs

Anantnag - Jammu And Kashmir

Tender for construction of septic tank soakage pit, providing fixing of sanitary fittings for bathrooms, aluminum works for doors, collapsible steel shutters iron grill for windows for newly constructed building of phe divisional office at awantipora

Central Government/Public Sector

TRN :19034937 | 24 Sep, 2020

Tender Value : 54.60 Lacs

Rajouri - Jammu And Kashmir

Tender for supply of mta stores job no 6613, 6961, 6937- non skid ceramic colour floor tiles of size 600 x 600mm, 10 mm thick 1 st quality heavy duty abrasion resistance conforming to is 15622 as per sample approved make-johnson/kajaria/somany acrylic sheet 4x3x4mm painting brush 50mm horse brand long hair painting brush 25mm horse brand long hair ply wood 6 x 4 x 6mm make- century/kitply, green lam white cement make- birla/ jk /shree bib cock brass 15mm dia make: parco/jaarc/yaspal/bir bib cock brass 20mm dia make: parco/jaarc/yaspal/bir stop cock brass 15mm dia make: parco/jaarc/yaspal/bir stop cock brass 20mm dia make: parco/jaarc/yaspal/bir gi pipe 40 mm each pipe 6 mtr long make jindal/tata/apollo medium grade b class gi pipe 50 mm each pipe 6 mtr long make jindal/tata/apollo medium grade b class gi pipe 65 mm each pipe 6 mtr long make jindal/tata/apollo medium grade b class gi socket 50mm dia as per is 1879 isi marked gi socket 65mm dia as per is 1879 isi marked gi socket 80mm dia as per is 1879 isi marked gi union 20mm dia with conforming to is 1239-i isi marked gi union 40mm dia with conforming to is 1239-i isi marked gi union 50mm dia with conforming to is 1239-i isi marked gi elbow 32mm dia with conforming to is 1239-i isi markded gi elbow 40mm dia with conforming to is 1239-i isi marked gi elbow 50mm dia with conforming to is 1239-i isi marked gi elbow 65mm dia with conforming to is 1239-i isi marked gi tee 25mm dia as per is 1879 isi marked gi tee 32mm dia as per is 1879 isi marked gi tee 65mm dia as per is 1879 isi marked gi reducer socket 15/40mm dia with conforming to is 1879 isi marked gi reducer socket 20/25mm dia with conforming to is 1879 isi marked gi reducer 80 x 65mm with conforming to is 1879 isi marked gi reducer 40 x 32mm with conforming to is 1879 isi marked gi reducer socket 25/20mm dia with conforming to is 1879 isi marked gi reducer socket 25/15mm dia with conforming to is 1879 isi marked gi reducer socket 20/15mm dia with conforming to is 1879 isi marked gi bend 65mm dia as per is 1879 isi marked gi bend 50mm dia as per is 1879 isi marked gi bend 40mm dia as per is 1879 isi marked gi bend 32mm dia as per is 1879 isi marked gi bend 25mm dia as per is 1879 isi marked gi bend 20mm dia as per is 1879 isi marked gi bend 15mm dia as per is 1879 isi marked gi tee reducer 25/15 mm with conforming to is 1879 isi marked gi tee reducer 20/15 mm with conforming to is 1879 isi marked gi tee reducer 50/25 mm with conforming to is 1879 isi marked dry distemper make -berger/asian/nerolac/shalimar leather hand gloves supperior quailty with pesude leather and wooden inner lining and double patch on pads. isi marked as per sample approved make: hira m seal in 100 gms pkt make-pidlite tank nipple 20mm pvc pipe 110 mm 6 mtr long long make- finolex/prince/surya pvc s strap 100 mm make- finolex/prince/surya pvc elbow 110 mm make- finolex/prince/surya pvc bend 110 mm make- finolex/prince/surya tank connector 15mm tank connector 20mm tank connector 25mm dhaga ci end plug 15mm ci end plug 20mm ci end plug 25mm ci end plug 40mm j hook with washer and bolt tmt steel bar 12mm dia as per is 1786-1979 make – tata/sail/jindal wooden plank of size 10’x10”x1” make-kail/chir ball valve brass 15mm make - parco/jaarc/yaspal/bir ball valve brass 40mm make - parco/jaarc/yaspal/bir ball valve brass 50mm make - parco/jaarc/yaspal/bir self tapping screw ½ “ make- bir/leader/yaspal self tapping screw 1 ½“ make- bir/leader/yaspal self tapping screw 2“ make- bir/leader/yaspal iron cutter blade make- bir/leader/yaspal nrv 80mm make- bir/leader/yaspal nrv 65mm make- bir/leader/yaspal hexa frame ms pipe 50mm dia make- medium grade jindal/appolo/surya gate valve 25mm make - bir/leader/yaspal gate valve 40mm make - bir/leader/yaspal gate valve 50mm make - bir/leader/yaspal gate valve 80mm make - bir/leader/yaspal non skid ceramic tiles 300x300x7 to 8 mm thick square/rectangular make-johnson/kajaria/somany vitreous china wash water closet pan padestal pattern whiteexcluding fixing bollts, flushing cistern and flush pipe and including seat cover etc. make- parryware/cera/somani ms pipe 20mm dia pipe cutter blade 14 adopter 8mm salt charcol prefabricated ms loop hole of clear opening 450mm x300mm with ms shutter 12mm thick with locking device j hook with washer and bolt 8mm ms angle iron picketframef size 50mm x 50mm x 6mm cp cloth hook led bulk head fitting make-bajaj/ c&s/hawells emery paper gi strip aluminium prong with five spikes aluminium rod for prong 12mm x 3 mm long aluminium strip 25 x 3 mm nails 4 nails 3 nails 2 nails 1 nails 1/5 swr 12mm special service isi marked make : asahi rope/usha martin/mahadev complete length in one roll chequered cement concrete tiles 30cmx30cmx25mm thick pvc cable 10 sqmm 2 core standard aluminum conductor pvc sheathed make- havells/finolex/polycab/plaza roll of 90 mtrs cable flat 16 sqmm x 3 core copper conductor make- havells/ plaza/ firolex switch socket combination 5 pin 5 amp make – anchor/havells/legrand switch socket combination 6 pin 5/15 amp make – anchor/havells/legrand switch socket combination 5 pin 5 amp with gang box make – anchor/havells/legrand switch socket combination 6 pin 5/15 amp with gang box make – anchor/havells/legrand socket 5 pin 5 amp as per is 1293 make – anchor/havells/legrand pendent holder make – anchor/havells/legrand mcb 63 amp tpn make – havells/legrand/anchor industrial type general purpose on load change over switch ac 23 with side handle in sheet metal exclusive to confirming to isiec 60947 1&3, three phase 415 volts, 4 pole, 32 amps make – legrand/havells/indogo. industrial type general purpose on load change over switch ac 23 with side handle in sheet metal exclusive to confirming to isiec 60947 1&3, three phase 415 volts, 4 pole, 63 amps make – legrand/havells/indogo. wooden board with sunmica10x12 wooden board with sunmica 8x6 switch board wooden 12 x10 pvc with sheet bulb 9w make - havells/phillips/bajaj/ orient. bed switch 5 amp make - havells/phillips/bajaj/ orient. pvc switch board 8 x 6 with sheet make - havells/phillips/bajaj/ orient. pvc round block make - havells/phillips/bajaj/ orient. casing capping 25mm isi marked casing capping 35mm isi marked conduit pipe isi marked fan regu lator large size isi marked extension board isi marked mcb box 4 way make - havells/phillips/bajaj/ orient. mcb box 2 way make - havells/phillips/bajaj/ orient. pvc square box 10x10 make - havells/phillips/bajaj/ orient. wall cage made of 8mm steel tor make - sail tmt/tata tmt/jindal tmt/ vizag tmt/ kamdenu tmt as per is 2062/1999 with specification of weight kg/m being not less than 0.395 kg. the basket will be of size as under :- a height – 75 cm. b width – 60 cm. c length – 90 cm the mesh will be of a dimension 15 cm x 15 cm with all four corners of wall cage hinged with rings made of 10mm tor, dia 1.25 inch with a total of 20 rings 4 nos each corner. each basket to have 04 nos of clamps. clamp should consist of two nos of ms plate of size lxbxt 100mmx40mmx 4mm with 2 nos of holes as mentioned in drawing, 2 nos of 50mmx8mm full threading nut and bolts as shown in the drawing be provided with the each clamp alongwith the washers with each nut bolt. one coat of red oxide primer to be applied to entire cage surface. cross laminated uv stabalised ldpe sheet conforming to is 14611/1998, 150 gsm along with suitable fixing arrangement colour- black/og make – silpaulin steel roofing trough 3000mm long made out of 2mm thick @ 45kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to is specification with 16 nos 12mm dia long bolt, machine made heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per srt. the overall width of srt shall be 613mm and height shall be 180mm. the shape of srt shall be regular and angle of bending shall be maintained properly. the srt not found properly in shape shall be rejected isi marked. make: tata/sail steel roofing trough 2400mm long made out of 2mm thick @ 36kg each with tolerance -2% to + 5 %, hot rolled carbon steel sheet confirming to is specification with 16 nos 12mm dia long bolt, machine made heavy duty complete threaded with one nut and two washers of 30mm outer diameter and 3mm thick, per bolt, per srt. the overall width of srt shall be 613mm and height shall be 180mm. the shape of srt shall be regular and angle of bending shall be maintained properly. the srt not found properly in shape shall be rejected. make: tata/sail

State Government

TRN :18995543 | 25 Sep, 2020

Tender Value : 1.68 Crore

Hisar - Haryana

Tender for supply of building materials- p&f shisham wood shutters of 32-35 mm 12mm thick commercial plywood panel excluding aluminium isi hardware fittings complete in all respect as per pwd specifications including one coat of primer p&f shisham wood shutters with wire gauge 32-35 mm thick excluding aluminium isi hardware fittings complete in all respect as per pwd specifications including one coat of primer p&f shutter hardwood such as red marrandi, hollocks etc. 32-35mm 12mm thick commercial plywood panel excluding aluminum isi hardware fittings complete in all respect as per pwd specifications including one coat of primer factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect commercial veneers- 30-32 mm thick. pwd specification 3.54 factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect one side commercial and other side teak face veneers- 30-32mm thick. pwd specification 3.54 factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect both side teak face veneers- 30-32mm thick. pwd specification 3.54 factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect commercial veneers- 35 mm thick. pwd specification 3.54 factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect one side commercial and other side teak face veneers- 35mm thick. pwd specification 3.54 factory manufactured solid flush door, shutters excluding aluminum isi hardware fitting complete in all respect both side teak face veneers- 35mm thick. pwd specification 3.54 factory manf. wire gauze door and window shutters of commercial hard wood such as hoolock, chaimp, chikrassy and chaplash etc. as per hsr 17.92 30mm to 35mm thick. 8 l drop 16mm dia rod- steel pwd specification 3.38 14 l drop 16mm dia rod- steel pwd specification 3.38 8 l drop 16mm dia rod- aluminium pwd specification 3.38 14 l drop 16mm dia rod- aluminium pwd specification 3.38 6 aluminium handle pwd specification 3.38 5 aluminium handle pwd specification 3.38 tower bolt 8 aluminium pwd specification 3.38 tower bolt 6 aluminium pwd specification 3.38 tower bolt 4 aluminium pwd specification 3.38 steel hinges 4 pwd specification 3.38 steel hinges 3 pwd specification 3.38 nut bolt 2 x 2 pwd specification 3.38 nut bolt 3 x 2.5 pwd specification 3.38 screw 35 x 8 pwd specification 3.38 screw 30 x 7 pwd specification 3.38 screw 20 x 5 pwd specification 3.38 door spring pwd specification 3.38 fiber screw pwd specification 3.38 i.e. wooden shutters and hardware fitting etc in all villages of block uklana group6

Central Government/Public Sector

TRN :18978958 | 29 Sep, 2020

Tender Value : 0

Indore - Madhya Pradesh

Tender for annual maintenance contract for civil maintenance and repairing work and earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge: 2.1.1 all kinds of soil earth work in excavation by mechanical means hydraulic excavator/manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. 2.6.1 all kinds of soil filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil all kinds of soil pipes, cables etc, not exceeding 80 mm dia pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia excavating, supplying and filling of local earth including royalty by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 1 cement : 3 coarse sand zone-iii : 6 graded stone aggregate 20 mm nominal size providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 1 cement : 1.5 coarse sand zone-iii: 3 graded stone aggregate 20 mm nominal size centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete lintels, beams, plinth beams, girders, bressumers and cantilevers columns, pillars, piers, abutments, posts and struts steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more. brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 cement mortar 1:4 1 cement : 4 coarse sand providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite of any colour and shade area of slab over 0.50 sqm providing and fixing isi marked flush door shutters conforming to is : 2202 part i decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screws providing and fixing bright finished brass tower bolts barrel type with necessary screws etc. complete : 9.74.1 250x10 mm providing and fixing bright finished brass door latch with necessary screws etc. complete : 9.75.1 300x16x5 mm providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125 mm providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm, with necessary accessories and screws etc. complete gypsum board partitions 9.105 providing and fixing partition upto ceiling height consisting of g.i. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form g.i. sheet with zinc coating of 120 gms/ sqmboth side inclusive, consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. the boards are to be fixed to the frame work with joints staggered to avoid through cracks, galvanised m.s. fixing channel of 99 mm width 0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqmboth side inclusive to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners 25 mm x 25 mm x 0.5 mm, joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum grg plaster board conforming to is: 2095: part 3 : 1996 board with bis certification marks steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works providing & fixing fly proof wire gauze to windows, clerestory windows & doors with m.s. flat 15x3 mm and nuts & bolts complete. stainless steel grade 304 wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of engineer-in-charge. kota stone slab flooring over 20 mm average thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 1 cement : 4 coarse sand : 11.26.1 25 mm thick providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 1 cement : 4 coarse sand, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 size of tile 600x600 mm providing and laying vitrified tiles in different sizes thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 size of tile 600x600 mm providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, i single socketed pipes.including fittings such as coller, bend, tee, clips and shoe etc. 75 mm diameter metre providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, i single socketed pipes.including fittings such as coller, bend, tee, clips and shoe etc. 110 mm diameter providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, i single socketed pipes.including fittings such as coller, bend, tee, clips and shoe etc. 160 mm diameter providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s. sheets and galvanized with zinc coating of 120 gms/sqm both side inclusive as per is : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer in charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to is: 2095- part i : 2011 board with bis certification marks 12.5 mm thick tapered edge glass reinforced gypsum grg board conforming to is: 2095- part 3 : 1996 board with bis certification marks cement plaster in coarse sand 13.4 12 mm cement plaster of mix : 1:4 1 cement: 4 coarse sand 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 1 cement: 4 coarse sand finishing walls with water proofing cement paint of required shade : new work two or more coats applied @ 3.84 kg/10 sqm providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work two or more coats over and including water thinnable priming coat with cement primer painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. laying, spreading and compacting stone aggregate of specified sizes to wbm specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . including supplying of metal and screaning material, moorum etc complete dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to is:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of engineerin- charge. providing and laying design mix cement concrete of m-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy m.s. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints 10 mm wide x 50 mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineer-in-charge item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately. note:- cement content considered in m-30 is @ 340 kg/cum. excess/ less cement used as per design mix is payable/ recoverable separately. cement concrete prepared with batch mixing machine providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge. 16.91.1 60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. providing and fixing white vitreous china pedestal type european type/ wash down type water closet pan. providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water 250 ml & 500 ml consumption, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer-in-charge. providing and fixing p.v.c. low level flushing cistern with manually controlled device handle lever conforming to is : 7231, with all fittings and fixtures complete. 10 litre capacity - white providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : 17.20.1 white solid plastic seat with lid providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-in-charge. providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. providing and fixing toilet paper holder : c.p. brass providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal outer dia pipes 32 mm nominal outer dia pipes metre 480.55 40 mm nominal outer dia pipes metre 648.60 50 mm nominal outer dia pipes providing and fixing brass bib cock of approved quality : 15 mm nominal bore providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end : 25 mm nominal outer dia pipes providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end : 32 mm nominal bore. each 581.25 providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end : 40 mm nominal bore each 678.40 providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end : 50 mm nominal bore providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 15 mm nominal bore each 618.80 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15 mm nominal bore each 552.35 18.52 providing and fixing c.p. brass stop cock concealed of standard design and of approved make conforming to is:8931. 15 mm nominal bore providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore each 532.00 providing and placing on terrace at all floor levels polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. providing and fixing square-mouth s.w. gully trap class sp-1 complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size inside the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size p type with common burnt clay f.p.s. non modular bricks of class designation 7.5 providing and laying non-pressure np2 class light duty r.c.c. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 1 cement : 2 fine sand including testing of joints etc. complete : 150 mm dia. r.c.c. pipe metre providing and laying non-pressure np2 class light duty r.c.c. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 1 cement : 2 fine sand including testing of joints etc. complete : 250 mm dia. r.c.c. pipe metre providing and laying non-pressure np2 class light duty r.c.c. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 1 cement : 2 fine sand including testing of joints etc. complete : 300 mm dia. r.c.c. pipe metre constructing brick masonry manhole in cement mortar 1:4 1 cement : 4 coarse sand with r.c.c. top slab with 1:1.5:3 mix 1 cement : 1.5 coarse sand zone- iii : 3 graded stone aggregate 20 mm nominal size, foundation concrete 1:4:8 mix 1 cement : 4 coarse sand zone- iii : 8 graded stone aggregate 40 mm nominal size, inside plastering 12 mm thick with cement mortar 1:3 1 cement : 3 coarse sand finished with floating coat of neat cement and making channels in cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size finished with a floating coat of neat cement complete as per standard design with common burnt clay f.p.s. non modular bricks of class designation 7.5 inside size 120x90 cm and 90 cm deep including c.i. cover with frame medium duty 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg weight of cover 58 kg and weight of frame 58 kg : with common burnt clay f.p.s. non modular bricks of class designation 7.5 extra for depth for manholes : size 90x80 cm extra for depth for manholes : size 120x90 cm constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 1 cement : 4 coarse sand, inside cement plaster 12 mm thick with cement mortar 1:3 1 cement : 3 coarse sand finished with a floating coat of neat cement, foundation concrete 1:3:6 mix 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size, and making necessary channel in cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with s.f.r.c. cover and frame heavy duty, hd-20 grade designation 560 mm internal diameter conforming to i.s. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size including centering, shuttering all complete. excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately : 19.9.1.1 with common burnt clay f.p.s. non modular bricks of class designation 7.5 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 1 cement : 4 coarse sand including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design : with common burnt clay f.p.s. non modular bricks of class designation 7.5 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. glazing, paneling and dash fasteners to be paid for separately : powder coated aluminium minimum thickness of powder coating 50 micron for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required fittings shall be paid for separately powder coated aluminium minimum thickness of powder coating 50 micron providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. 21.2.1 pre-laminated particle board with decorative lamination on one side and balancing lamination on other side providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . cost of aluminium snap beading shall be paid in basic item: with float glass panes of 5 mm thickness weight not less than 12.50 kg/ sqm with float glass panes of 8 mm thickness weight not less than 20 kg/ sqm providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to is : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer-in-charge. 21.4.1 with stainless steel cover plate minimum 1.25 mm thickness filling the gap in between aluminium frame & adjacent rcc/ brick/ stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer-in-charge complete. 21.8.1 upto 5mm depth and 5 mm width providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with ss screws etc .complete as per direction of engineer-in-charge. powder coated minimum thickness 50 micron aluminium tubular handle bar providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc. complete providing and fixing anodised aluminium grill anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15 of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer-in-charge. only weight of grill to be measured for payment. providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-incharge door handle, lock and stopper etc.to be paid separately. higher charge of jcb including deasel and driver higher charge of hydra crane including deasel and driver 1st hrs including transporting at site higher charge of hydra crane including deasel and driver next after 1 hrs higher charge of tractor including trolly/ cultivator driver and desel higher charge of hayva more than 15 cum capacity including driver and desel supply of man power for various work beldar mason brick layer 1st class supply of man power for various work fitter/carpenter supply of man power for various work painter supply of man power for various work plumber

Central Government/Public Sector

TRN :18968676 | 28 Sep, 2020

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for provision of amphibious training equipment- factory made pvc/ frp door frames & shutters wood based partitions galvalume sheet aluminium doors/windows ventilators aluminium & brass mongery ceiling board aluminum sections for false ceiling water proofing compound glazed earthen ware /ceramic tiles/vitrified tiles chequered cement concrete tile inter locking paver tiles pin head/ figured / sheet/ frosted glass synthetic enamel paint anticorrosive paint steel cement based paints dry/ oil bound distempers dry/ oil bound distempers and emulsions acrylic emulsion paints acrylic exterior antifungal paints pvc pipes upvc/cpvc/ppr pipes erw pipes sanitary fittings mortice locks hydraulic door closers ms sheet towel rails gi pipes and ms pipes hdpe pipes stainless steel sink/ plate rack pvc swr pipes stop valves foot valve sluice valves isi marked gate valve, ball valve pvc water tanks low level flushing cistern seat and cover for wc bib taps, stop valves and pillar taps bib taps, stop valves and pillar taps ptmt pvc toilet cabinet hot & cold water supply fittings mirror towel rail laminated sheets putty particle board & pre-laminated particle board steel conduit pvc pipe/ pvc conduits mcbs / mcb dbs mccbs/ mccb dbs batten holder bracket and ceiling light fittings lamp holder for pendent and batten type fittings and ceiling rose bell buzzer hpmv/hpsv lamp fittings change-over switch pvc casing capping & pvc fittings / fixtures led light fittings tube light fittings push button/ selector switch/indicating lamps exhaust fan/ceiling fan wiring accessories & switches, switch sockets, bell push, modular switches copper cables xlpe cables store room at nariyal bagicha toilet block for guard at nariyal bageecha and near dining hall of offr transit accn at brichgunj mil stn port blair under ge brichgunj

State Government

TRN :18970132 | 21 Sep, 2020

Tender Value : 1.25 Lacs

Jammu - Jammu And Kashmir

Tender for providing and fitting of l.t. armoured aluminum cable along with providing and fitting of knife edged linksets, fusesets at 250 kva substation of tubewell no. 2 feeding cps company bagh along with allied works

State Government

TRN :18954390 | 28 Sep, 2020

Tender Value : 9.99 Lacs

Umaria - Madhya Pradesh

Tender for procurement of 100w led based integral high pressure die cast aluminum housing complete street light fittings for colony to power house road colony premises street light poles an ph i street light poles at sgtps birsinghpur

Central Government/Public Sector

TRN :19038307 | 28 Sep, 2020

Tender Value : 6.15 Lacs

Kannada - Karnataka

Tender for providing aluminium partition and other modification works at last bay of mechanical workshop building allotted to crf in nitk. providing aluminium partition

Central Government/Public Sector

TRN :19038424 | 08 Oct, 2020

Tender Value : 0

Udyogamandal - Kerala

Tender for supply of aluminium flat alloy

Related Keywords : aluminum fitting

List of latest aluminum-fitting Tenders in Indian Tenders. Click on any aluminum-fitting Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-fitting Tenders.

Tender for construction of septic tank soakage pit, providing fixing of sanitary fittings for bathrooms, aluminum works for doors, collapsible steel shutters iron grill for windows for newly constructed building of phe divisional office at awantipora

Tender for providing and fitting of l.t. armoured aluminum cable along with providing and fitting of knife edged linksets, fusesets at 250 kva substation of tubewell no. 2 feeding cps company bagh along with allied works

Tender for procurement of 100w led based integral high pressure die cast aluminum housing complete street light fittings for colony to power house road colony premises street light poles an ph i street light poles at sgtps birsinghpur

Tender for providing aluminium partition and other modification works at last bay of mechanical workshop building allotted to crf in nitk. providing aluminium partition

Tender for supply of aluminium flat alloy

Get aluminum fitting Tender Alert...

Related Keywords : aluminum fitting

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us