Filters

List of latest aluminium-frame Tenders in Indian Tenders. Click on any aluminium-frame Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminium-frame Tenders.

All-Tenders (32)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Corporations And Associations And Others

TRN :19281953 | 23 Oct, 2020

Tender Value : 9.03 Lacs

Malappuram - Kerala

Tender for material collection facility, 2.8.1 earth work in excavation by mechanical means hydraulic excavator /manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan, including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 4.1.8 : providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size 60.7.1 : dry rubble masonry dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of departmental officers at site 7.1.1 : random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size up to plinth level with:cement mortar 1:6 1 cement : 6 coarse sand 50.6.7.1 : laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. 5.1.2 : providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 50.6.7.2 : laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 50.6.1.2 : solid block masonry using pre cast solid blocks factory made of size 40x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 1 cement: 6 coarse sand etc complete. 5.2.2 : reinforced cement concrete work in walls any thickness, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size 5.3 : reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 1 cement : 1.5 coarse sand zone iii : 3 graded stone aggregate 20 mm nominal size. 5.9.5 : centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 5.22.6 : steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 50.10.1 : steel work in built up g i tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete od891474/2020 2021 : providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by engineer-in-charge 0.40 mm +0.05%, total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size 5.5x55mm with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. data modified 12.50 9.48.1 : providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 9.53 : providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 13.1.1 : 12 mm cement plaster of mix:1:4 1 cement : 4 fine sand 10.5.1 : providing and fixing 1 mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.using m.s. angels 40x40x6 mm for diagonal braces 13.43.1 : applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:water thinnable cement primer 13.82.2 : wall painting with acrylic emulsion paint, having voc volatile organic compound content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.two coats 11.3.1 : cement concrete flooring 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregatefinished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 13.84.2 : painting with synthetic enamel paint, having voc volatile organic compound content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.two coats 50.9.15.2 : supplying and fixing 300 mm aluminium aldrop 16.68 : providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge.

corporations/Associations/Others

TRN :19282320 | 23 Oct, 2020

Tender Value : 0

Mumbai - Maharashtra

Tender for auction sale of scrap - electronic items, transformer winding thermometer, inductors, coil craft, cpu, keyboard, mouse, power cord, car radio music sytem, electronic part, coulter ac.t diff 2 hematology analyzer, orth clinical diagnostic vitros dte 11, lithium ion phosphate battery, motor blower, cisco catalyst 3850 24 port unit, transformer winding thermometer, cable- 1 roll, m.s. parts, vehicle spare part, fastner, insulator, etc, double acting hydraulic retriever for double isolation valve and service valve, canned motor pump, plastic part, ranault car plastic part, 4 wheeler plastic bumper, blazer carpet strip, pressure transmitter, flex tube monometer, etc, spare parts, cable drum-, clamp, zinc anode. coupling, etc, cutting inserts, bearing, pressure gauge, grinding wheel, etc, exhaust valves, combi roll over valve, fusible fuse holder cover, rubik cubes - 150 pcs, small rubber bottle cap - 72 box, cylindrical lock, handle lock etc. as per annexure, wooden skit, piece for photo frame etc., laptop bag, tablet cover, aluminium flexi liquid storage bag - 37 boxes, universal tablet pc holder etc., bulk cargo polythene bags - 120 pcs, executive office chair - 1 pc., wooden door frame, floor mat, lock plate etc., plastic bottle cap - 32000 pcs., metal strips, printed matter, toilet tissue dispenser, blank wiping rolls, ceramic tiles - 50 pcs., automatic processor module, ethernet cable, testing patch card etc., exchange unit, pcb, ic, ip transducer etc., schneider part, usb backup power etc., printed matter, wall paper sample booklets, plastic box cover, ic, electrical coil, resonating horn, kit needle holder etc., cottor pin, coupling kit, lever anilo latch monk etc., weld butterfly valve, tc clamp set, honeywell, temp sensor, valve assembly, pen, id holder ribbon, spoon, power dhaga etc., ceramic items, chain, non stick cookware etc., ear rings, hair band, snugg, ballpoint pen etc.

Central Government/Public Sector

TRN :19282800 | 24 Oct, 2020

Tender Value : 0

New Delhi - Delhi

Tender for supply of stores superstructure of toilet block including columns, trusses, purlins, roof, wind tie, false ceiling, doors, windows, ventilators/ wall panels, urinal partitions complete all as shown on drg and as specified, including pcc foundation of columns, foundation bolts etc. cement ppc/opc 53 grade make : ambuja / birla / acc / ultratech/jk/shree sand coarse to be approved by consignee authority stone aggregate 20mm nominal size graded. stone aggregate 40mm stone aggregate 63mm to 75mm pcc block of size 400 x 200 x 200mm made in 1:2:4 brick bats water proofing compound make : pidilite / acc / ultratech / ambuja white cement make : ambuja / jk / ultra tech / birla / acc non skid ceramic coloured tiles of size 400 x 400 x 7-8mm thick make : kajaria / asian / jhonson / somani led bulb 12 watt with angle holder make - philips / bajaj / c&g/oreva . led tube light 2 x 10 w complete with tube rod and frame make : philips / bajaj / surya / crompton external type 24 watt led light complete make - bajaj / philips /oreva / crompton & greaves switch socket combination 15 amps make : anchor / crabtree / siemens / c&g mcb db enclosure 8 way complete sheet metal enclosures. make : havells / crompton greaves / anchor / l&t / siemens / indoasian / abb mcb sp 05 to 30 amp, 10 ka, c series. make : havells / crompton greaves/indoasian / siemens / abb, mcb 16 amp with gang box make : anchor / crabtree / siemens / c&g/indoasian pvc gang box with modular pvc plate of suitable size as per ground reqmt approved by consignee switch 5 amp modular type make : indoasian / crabtree / siemens / c&g ceiling rose make : bajaj / philips / siemens / anchor pvc sq block 3 x 3 pvc capping/casing 25mm with accessories make : modi / anchor / havels /presto plast pvc insulation tape 15 mm make : steel grip / faxell screw full threaded 1 100 nos per pkt screw full threaded 1½ 100 nos per pkt pvc unarmoured aluminium cable 10 sqmm 2 core make : kei / finolex / havells exhaust fan 300 mm pvc body with louvres make : bajaj / usha / crompton / khaitan pvc copper cable insulated, multi strands 1.5 sqmm make : anchor / finolex / havells, colour - black, red. pvc copper cable insulated, multi strands 2.5 sqmm make : anchor / finolex / havells, colour - black, red. pvc copper cable insulated 1 sqmm colour green make : kei / finolex / havells water based exterior emulsion paint make: asian / nerolac / berger / shalimar synthetic enamel paint first quality colour and sample to be approved. make - nerolac /apcolite / asian / shalimar / berger primer first quality make : asian / nerolac / berger / shalimar thinner make : asian / nerolac / berger / shalimar hdpe water tank 2 x 1000 ltrs make: sintex capacity including 3.2m high staging as per drg att incl tank nipples, painting etc including foundation as shown in drg. coloured aiwc vitreous china of size 500 x 345 x 390mm with seat cover complete with s trap., coloured iwc vitreous china orissa pattern of size 450 x 580mm complete with s trap. make : cera / hindware / parryware pvc flushing cistern 10 ltrs. capacity with complete fitting to wc make : hindware / parryware / cera coloured vitreous china wash hand basin of size 590 x 480mm including waste pipe ci bracket and bottle trap. make : hindware / parryware / cera etc. vitreous china half stall urinal pot of size 390 x 390 x 610mm including spreader and push button mechanism with accessories of make cera/ parryware / hindware. soap holder cp bib cock brass 15mm dia mininum weight 400 grammake- jindal / tata / crabtree / cera/ pvc nahani trap with grating to be approved by consignee authority stop cock brass 20mm dia cp make- jindal / tata / crabtree / cera angle cock brass 15mm dia cp make- jindal / tata / crabtree / cera float valve assembly brass 20mm dia make -prayag / poly tuff pvc connection 15mm dia 450mm long, isi marked pillar tap cp 15mm dia make :jindal / tata / crabtree / cera gi pipe 15mm dia medium grade with gi nipples and complete fittings make : tata / jindal / swastik / itc gi socket 15mm dia medium grade with isi mark gi pipe 20mm dia medium grade pipe with gi nipples and complete acessaory isi marked gi pipe 25mm dia medium grade pipe with gi nipples and complete acessaory isi marked gi reducer 20mm x 15mm dia medium grade with isi mark gi union with washer 20mm dia medium grade with isi mark gi elbow 15mm dia medium grade with isi mark gi t 20mm x 15mm dia medium grade with isi mark gi t 25mm x 20mm dia medium grade with isi mark pvc pipe 100mm dia isi marked.first grade pvc bend 100 mm dia, isi marked pvc t 100 mm dia, isi marked m seal plumber 200 gm pkt cowl pvc 100 mm dia, isi marked, pvc branch piece 100 mm dia double junction cross, isi marked simple rectangular 1400 x 600mm mirror as approved by consingnee make: polytuff / prayag / commandar 100mm +5mm thick machine cut one side stone patti as slab/cover of size 3m x 0.3m/0.25m. safeda towel rail stainless steel 300mm long make: sona/prayag/cera 60 mm thick, m-40 grade machine pressed precasted interlocking paver blocks with rough top of approved make & colour by consignee laid as specified. stone kerb of roughly squared stones of size 20cm x 30cm x 45 cm dressed so that the maximum depression from a straight edge held against the dressedsurface shall not exceed 6mm for top and exposed surfacesof sides and 20mm for the restof surfaces jointed in cement mortar 1:6 and struck flush urinal partition as specified make: cera, parryware, hindware glazed ceramic tiles first quality 300 x 450 mm x 7 to 8 mm thick for urinal & whb area on vertical surface. make kajaria/ jhonson/ asian/ somany, hammer med size 500 grm taparia set of screw drivers taparia electric tester taparia hacksaw frame painting brush 50mm painting brush 100mm hacksaw blade double ended hand gloves measuring tape 30 mtrs durmut pan mortar tasla trowel mason plumb bob cutting pliers taparia measuring tape steel 3 mtrs tube level pipe 4mm of 15m length spanner set with all reqd sizes sprit level thread mason superior quality welding machine riveting machine drill machine portable with drill bits. for toilet blocks

corporations/Associations/Others

TRN :19283187 | 23 Oct, 2020

Tender Value : 0

Bangalore - Karnataka

Tender for auction sale of scrap - scrapped/damaged brass shaving, powder, bales, wires., scrapped/damaged alluminium shavings, bales, powder., scrapped/damaged ferrous shavings, powder, bales., damaged/scrapped corton boxes., used spent/burnt oil/used lube oil/used engine oil used atf mixed with water, scrapped/damaged polyton., scrapped/damaged liquid nitrogen aluminium containers., e- waste monitors, keyboards, mouse etc, scrapped/damaged wooden pallets and packing wood exposed to open atmosphere., scrapped/damaged copper wire cables., scrapped/damaged m.s panel boards, electric scrap, wires, cables ..etc., scrapped /damaged assorted plastic chairs, cans..etc., scrapped/damaged m.s tube light frames, scrapped/ damaged pvc sheathed aluminium armored cables., heavy/medium/small motors with m.s base frame, scrapped air driers, used scraped/damaged grinding wheels, scraped/ damaged rubber seals/ orings/ packing?s/ beedings., herbert no.4 capstan lathe, hoffler zp250 gear testing machine, heyligenstaedt t-bed lathe, lapping machine, thread cutting machine, kadia vertical honing machine, g.f copy lathe, srm copy milling machine, engraving machine, electronic weighing machine, vickers hardness testing machine

Central Government/Public Sector

TRN :19283294 | 30 Oct, 2020

Tender Value : 0

Sriganganagar - Rajasthan

Tender for supply of general stores alongwith accessories for or living shelter 10 men - polyurethane foam, galvalume coated and pre-painted u channel, pre painted truss members, pre painted purlins, pre painted principal rafter, pre painted main column, pre painted door column, pre painted verandha column, pre painted extra column, pre painted tie runner, pre painted eaves connector 300mm long made of rectangular hollow steel, pre coated profiled galvanized steel sheet roof covering gi based, self driven power screw, aluminium sliding windows, aluminium cooler opening, brunt clay sub class b bricks of size 230mm x115mm x75mm with frog size 110 x 40 x 10-20mm having min compressive str 75 kg/cm2 and conforming to is 12894 of 2002. cement bags ppc conforming to is -1489 part-i 1991 with amdt no 1 to 3 packed in hdpe bag of 50 kg each confirming to is-11652/2000 make : ambuja/ birla/ ultratech/ shree sand conforming to is-383-1970. the sand shall be hard, dense, strong, durable, clear and free from veins, adherent coatings, disintegrated pieces, alkali, vegetable matters and other deleterious substances. graded stone aggregate of size 40-63mm conforming to is-383-1970hard core graded stone aggregate of size 40mm conforming to is-383-1970 graded stone aggregate of size 20mm conforming to is-383-1970, thinner make : berger/ goodlas nerolac/walgo wood primer red oxide make shalimar or equivalant synthetic enamel paint make : shalimar/ asian/ berger/ goodlas nerolac polished kota stone 20mm-25mm thick and size not less than 600x600mm mansion floor polish for kota flooring glazed ceramics tiles of size 300mm x 200mm, 6-7mm thick make : jhonson/ kajaria/ orient as in plinth cladding white cement curtain rod of 20mm dia with 2 brackets and 12 nos of curtain rings complete for 1.30 m long as in door curtain curtain rod of 20mm dia with 2 brackets and 12 nos of curtain rings complete for 1.50 m long as in windows fire extinguisher 2 kg capacity with mounting brackets. make : minimax/ omax water proofing compound for dpc, 20 w led tube light fitting with 4long make crompton greaves/bajaj/ havells/philips ceiling fan 1200 mm sweep complete with electronic dimmer 450w make: crompton greaves /usha/ bajaj/orient/ havells. clamp hook with nut & bolt for hanging ceiling fan with truss members. ceiling rose 2 to 3 terminal isi mark switch piano type 5 amps make-havells/bajaj /anchor/cona 5 pin 15 amps switch socket combination with pvc mounting box make:havells/bajaj/anchor/cona 5 pin 5 amps switch socket combination with pvc mounting box make- havells/bajaj/anchor/cona mcb db spn 12 way make: havells/ l&t/ standard/anchor/ cona. mcb dp 32amps conforming to is 8828-1996 make: havells/ l&t/ standard/anchor/cona. miniature circuit breaker mcb 6 amp to 32 amps single pole make: havells/ l&t/ standard/anchor/cona. pvc switch mounting box 6 x 8 make: havells/bajaj/ anchor/topson wire pvc insulated cable 1.5 sqmm multistranded copper conductor single core 1100v, grade conforming to is 694/1990 a roll of 90m long of make: havells/paragon/finolex/plaza, isi marked wire pvc insulated cable 2.5 sqmm multistranded copper conductor single core 1100v, grade conforming to is 694/1990 a roll of 90m long of make: havells/paragon/finolex/plaza, isi marked, wire pvc insulated cable 10 sqmm aluminium conductor unarmoured under ground 1100v grade two core conforming to is 694/1990 a roll of 90m long ofmake: havells/paragon/finolex/plaza, isi marked pvc casing capping 20 mm size make : topson/plaza/polyplast pvc casing capping 25 mm size make make : topson/plaza/polyplast pvc tee 20mm cassing capping make polyplast/shakti or equivalant pvc tee 25mm cassing capping make polyplast/shakti or equivalant pvc bend 20mm cassing capping make polyplast/shakti or equivalant pvc bend 25mm cassing capping make polyplast/shakti or equivalant pvc junction box 3 way 20mm cassing capping make polyplast/shakti or equivalant pvc junction box 4 way 20mm cassing capping make polyplast/shakti or equivalant pvc junction box 3 way 25mm cassing capping make polyplast/shakti or equivalant pvc junction box 4 way 25mm cassing capping make polyplast/shakti or equivalant tape insulation 10 mtr roll make: steel grip/anchor grip gi earthing plate 600x600x6mm thick with 10 mm dia, 25 mm long 02 nos nut & bolts. common salt charcoal gi wire 4mm 8 swg ci cover 5mm thick 300 x 300mm size hinged to ci frame gi funnel with wire mesh rawl plug pkt of 100 nos ai strip 25 x 3mm gi strip 25x3mm screw steel full threded 25mm pkt 100 nos screw steel full threded 32mm pkt 100 nos pvc box of size 4x4 for mounting ceiling rose/ pendent holder. flexible conduit 20mm dia conduit clip/screw pkt of 100 nos pre painted cooler stand 600mm x 600mm x 750mm made out of 25mm square pipe 2mm thick reqd ht at site, with min two horizontal supports in between the frame. where ever difference in height for cooler opening & height of stand exists, the same shall be adjusted with necessary brick staging. brick staging shall be painted with two coats of cement based paint over a coat of primer. desert cooler hy duty of overall size 650mm x 650mm x 1143mm of ms body pre-painted with honey comb media as approved with motor rpm 900, 180 watt, sweep 450mm, pump capacity 1/70 hp, 40 w make: khaitan/ crompton/ bajaj for motor and submersible pump, exhaust fan 300mm sweep with louvers make : crompton/bajaj incl fixing arrangements with gable ends over ceiling level. ms distribution box 3 phase 32 amp tpn with bus barsize 23cmx26cmx10cm approx.make : crompton/bajaj gi pipe 20mm dia 6 long light grade make :jindal/tata. gi pipe 50mm dia 6 long medium grade make:jindal/tata, charpoy, locker steel, writing table, chair writing, looking mirror, tepoy, stainless steel peg set of six hooksmason threads nylon 100 mtr yarn water level pipe 30 mtr long superior quality hacksaw blade both side teeth 1? long superior quality. painting brush 3 make : jawahar/sagar/priyanka/ jhonson ply wood 2.40m x 1.20mx12mm commercial type for form work. make: century/green ply/duro board isi marked, water proof scantling hard wood 50mm x 40mm, 2.40m long for form work. measuring tape 30 mtr metalic. measuring tape 5 mtr steel. lashing 1/2 dia 30 mtr long. nails various sizes.

Central Government/Public Sector

TRN :19283415 | 31 Oct, 2020

Tender Value : 11.00 Lacs

New Delhi - Delhi

Tender for supply of ridge piece for profile sheet roofing non skid vitrified tiles size 600x600x10mm make : somany/kajariya/nitco/orient sample to be got approved floor tiles non skid ceramic 300x300x7mmmake : somany/kajariya/ nitco/orient sample to be got approved wall tiles glazed ceramic 200x300x6mm upto 7 height make : somany/kajariya/ nitco/orient sample to be got approved distemper make : asian paints/berger/nerolac birla white wall care putty inside walls plain ac sheet size 1.20 mtr x 0.60 mtr s/no 8 of para 2 will be included in enquiry casing & capping 50mm 2 mtr long switch board abs 8x6 switch board 10x8 abs switch board 4x4 abs 03 pin socket 6 amp make : havells/anchor/plaza 03 pin socket 16 amp make : havells/anchor/plaza 03 pin plug 6 amp make : havells/anchor/plaza led bulb 7/8 watt make : syska/bajaj/wipro/cromption led bulb 15w make : syska/bajaj/wipro/cromption led bulb 18 watt make : syska/bajaj/wipro/cromption led bulb t type 09 watt make : syska/bajaj/wipro/cromption kitkat fuse 100 amp make : havells/anchor kit kat fuse 200 amp make : havells/anchor switch piano type 15 amp make : havells/anchor angle holder make : havells/anchor led tube light 4 complete set watt make : syska/bajaj/wipro/crompton pvc flexible wire 2.5mm single core make : phinolex/plaza/havells pvc flexible wire 1.5mm 2 core make : phinolex/plaza/havells pvc flexible wire 4mm make : phinolex/plaza/havells square box pvc 4 x 4 make : presto/havells/anchor steel pin pkt ceiling fan size 1200mm 3 way make : khaitan/orient/havells/bajaj insulation tape make : steel grip angle cock stainless steel 15mm make : essco/kajaria/hindware pillar cock stainless steel 15mm make : essco/kajaria/hindware vitreous china wash hand basin 550mm x 400mm make : paryware/kajari/ hindware kitchen sink stainless steel sink coupling waste pipe for wash basin pvc 2 dia bib cock 15mm stainless steel european type wc wall mounted all set make : hindware/paryware/kajariya/essco wc system tank plastic white jet spray gate valve pvc 20mm size pvc pipe 4 dia 6m long isi marked pvc t 4 dia isi marked pvc 2 dia pipe 6m long gi socket diff size isi marked gi union diff size isi marked gi r tee 25mm x 15mm isi marked gi pipe 15mm x 6 m long isi marked gi pipe 20mm x 6 m long isi marked gi pipe 25mm x 6 m long isi marked wooden scantling 4x2x 12 long for window frame replacement of existing windows wooden scantling 3x1/2x 12 long for window panels replacement of existing windows glass panes 4.25 x 2.25 glass panes 4.25 x 1.5 hinges aluminium 4 tower bolt aluminium 200 x 12mm bow handle aluminium 100 mm pvc mosquito wire mesh paper holder stainless steel make : hindware/essco/parryware fevicol adhesive 500gm jar steel wire mesh 1.20 m wide roll snow cem brick red paint cement based paint paint yellow make : asian/nerolac/ berger rope nylon 12 mm dia tower bolt 200 mm x 12 mm aluminium bow handle 100 mm aluminium hinges 4 brand ips steel hinges 3 steel make : godrej/eqvt hinges 2 steel make : godrej/eqvt alkatheline garden pipe 25 mm dia alkatheline garden pipe 15 mm dia floor jhali 3 stainless steel thinner make : nerolac paint og 20 ltr pack make : nerolac/asian paint/shalimar paint azure blue 4 ltr pack make : nerolac/asian paint/shalimar paint red oxide 20 ltr pack paint red 4 ltr pack make : nerolac/asian paint/shalimar paint white 4 ltr pack make : nerolac/asian paint/shalimar acrilic distemper pale cream 20 ltr pack make : nerolac/asian paint/shalimar birla wall putty 20 kg bag wire brush painting brush 4 coir brush brend srs white washing brush 6 lime unslaked hassain cloth 1 mtr wide blue for white washing steel plate for putty work door closer hydrolic electric bell with switch make : cona/anchor/havells pvc casing and caping 50 mm, 2 m long pvc switch board box 8 x 6 abs pvc switch board box 10 x 8 abs socket 3 pin 6 amp make : cona/anchor/havells 3 pin plug 6 amp make : cona/anchor/havells kit kat fuse 10 amp make : anchor/havells/plaza kit kat fuse 63 amp make : anchor/havells/plaza kit kat fuse 200 amp make : anchor/havells/plaza switch piano 6 amp type make : anchor/havells/plaza/girish pvc angle holder make make : anchor/havells/plaza/bajaj button holder make : prakash/anchor/havells bed switch make : havells/anchor/prakash copper flexible wire 2.5 mm sqr core 90 mtr long make :polycab/phinolex/plaza/havells pvc gang box one way make : havells/anchor/plaza pvc gangbox 02 way make : havells/anchor/plaza pvc gang box 6 way make : havells/ anchor/plaza mcb gang box d link ceiling mount light 12/18w make : havell/anchor/bajaj gi socket 25 mm isi mark gi socket 20 mm isi mark gi socket 15 mm isi mark gi union 25 mm isi mark gi union 20 mm isi mark gi union 15 mm isi mark gi r socket 20 mm x 15 mm isi mark gi r socket 25 mm x 20 mm isi mark gi r elbow 20 mm x 15 mm isi mark gi r tee 25 mm x 15 mm isi mark gi r tee 25 mm x 20 mm isi mark gi pipe 15 mm, 6 m long isi mark gi pipe 20 mm, 6 m long isi mark gi pipe 25 mm, 6 m long isi mark pvc pipe, 4 dia, 6 m long isi mark pvc bend 4 dia size pvc t 4 dia size pvc 2 dia pipe size 3 m long isi mark pvc 2 bend pvc 2 tee bib cock 15 mm make : shakti/ajanta angle cock 15 mm make : shakti/ajanta stop cock knot brand piller cock 15 mm make : ajanta/shakti gate valve 15 mm make : bvi gate valve 20 mm make : zoloto gate valve 25 mm make : bvi gate valve 2 size make : ajanta/shakti/bajaj pvc connection pipe 1- 6 long wash basin waste pipe 2 dia europian type wc sheet cover white plastric cistrnwhite europian type wc seat white make hindware/blue/essco/parryware waste jally stainless steel jet spray make : kajaria/hindware/ essco wall mixture make : kajaria/hindware/ essco teflon tape abro gi elbow 15 mm isi marked gi elbow 20 mm isi marked gi elbow 25 mm isi marked wash basin size 22x16 make :hindware/kajaria/prayag/essco float valve 15 mm make : shakti/isi marked tank nipple 20 mm make : shakti/isi marked tank nipple 25 mm make : blent/isi marked gi pipe nipple 15 mm x 50 mm isi marked gi pipe nipple 15 mm x 80 mm isi marked gi pipe nipple 15 mm x 100 mm isi marked gi pipe nipple 20 mm x 50 mm isi marked gi pipe nipple 20 mm x 80 mm isi marked gi pipe nipple 20 mm x 100 mm isi marked gi pipe nipple 25 mm x 50 mm isi marked gi pipe nipple 25 mm x 80 mm isi marked gi pipe nipple 20 mm x 100 mm isi marked hexa blade 1 size urinal pot make : cera/hindware/kajaria/essco waste pipe m seal 250 grm gi tee 15 mm x 15 mm x 15 mm isi marked gi tee 20 mm x 15 mm x 15 mm isi marked gi tee 25 mm x 25 mm x 25 mm isi marked gi tee 20 mm x 20 mm x 15 mm isi marked gi r elbow 25 mm x 25 mm x 20 mm isi marked basin bolt

Private Sector

TRN :19283509 | 05 Nov, 2020

Tender Value : 0

Pune - Maharashtra

Tender for sale of arising/arranged scrap - m.s./ci scrap consisting of: body shells with or without seat frames, chassis, doors and pieces, turning/burr, sheets, angles, channels, shutters, strips, fixtures, spring leaves, axels, hardware items, g.i. ducting, forging items, crank shaft, connecting rod, square tubes, chassis, coupling, housing, assorted seat, seat assemblies, with or without foam/seat cushion, scrap wood/plywood, scrapped/tested assorted cut tyres without wheel/disc, glass, plastic, rubber scrap material consisting various types of scrapped automotive & assorted scrapped materials, scrapped/tested automotive foams, scrapped/tested all types of aluminium material consisting extrusion, sheets, turning burr, barrier, frames with or without ms attachment, scrap empty ms/pvc barrels 205 ltrs cap, scrap used oil with coolant stored in 205 ltrs cap barrel, scrapped paper raddi, garbage–carton boxes, canteen garbage

corporations/Associations/Others

TRN :19266082 | 22 Oct, 2020

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for rate contract for aluminium doors frames etc

State Government

TRN :19268142 | 20 Oct, 2020

Tender Value : 1.10 Crore

Araria - Bihar

Tender for construction of road work at t02 to jhatola providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i working benchmark pillars reference pillars clearing and grubbing road land by manual means including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification-clause 201.1 and direction of e/i excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3 construction of embankment with material obtained from borrow pits with a lift upto 1.5 m, transporting to the site spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per technical specification clause 301.5 . 1000m lead 100 m lead construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller achieve the desired density, complete as per technical specification clause 401. providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502. providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm type-b aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller achieve the desired density, complete as per technical specification clause 401. providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 grade, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound where specified and water finishing to lines and grade as per drawing and technical laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412 reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703. ii km stone iii 200 m stone reinforced cement concrete m15 grade boundary pillars/local stone of standard design as per irc:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704 providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc :67 made of 1.5 mm thick ms steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of mord for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with m15 grade cement concrete 450x450x600 mm, 600mm below ground level as per approved drawing clause 1701.2.2. 600 mm circular, speed limit 900 mm equilateral & triangle, left, right curve 600 mm x 450 mm rectangular, school & place providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. planting of trees by the road side avenue trees in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard andmaintaining the plants for one year providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road new construction, extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of rcc pipe as per irc:981997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per irc: 98 - 1997 and approved drawings. providing and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and technical specification clause 1701 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 earth work in excavation for foundation of structures upto 3.0 m depth as per drawing and technical specification clause 1104 providing pcc m 15 1:2.5:5 concrete for plain concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 providing and laying rcc pipe np-3 for culverts on first class bedding of pcc m10 material in 600 mmsingle row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling concrete and masonary works in head walls and parapets as per clause 1106 painting two coats on new concrete surfaces:-painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 plain/reinforced cement concretem-20 in substructure complete as per drawings and technical specification clauses 802, 804, 805, 806, 807, 1202 ans 1204 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. sand filling in foundation trenches as per drawing and technical specification clause 1108. providing pcc m 15 1:2.5:5 concrete for plain concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 brick masonry work in cement mortar cm 1:4 in foundation complete excluding pointing and plastering as per drawing and technical specifications clauses 602, 603, 604, 1202 & 1203 brick masonry work in cement mortar cm 1:4 in substructure and kerb complete excluding pointing and plastering as per drawing and technical specifications clauses 602, 603, 604, 1202 & 1203 plain/reinforced cement concretem-20 in substructure complete as per drawings and technical specification clauses 802, 804, 805, 806, 807, 1202 ans 1204 providing bitumen painting over top surface of abutment cap & inner vertical surface of dirt wall including heating the bitumen & cost of painting brush etc. all complete. rcc m25 in deck slab :-- providing and laying reinforced cement concrete in superstructure deck slab m25 as per drawing and technical specifications clauses 800, 1205.4, 1205.5 supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight brick masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications clauses 600, 900 and 1208.4 plastering with cement mortar 1:4, 15 mm thick on brick work in sub-structure as per technical specifications clause 613.4 & 1204. painting two coats on new concrete surfaces:-painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 providing weepholes in brick masonary, plain / reinforced concrete abutement, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structure with slope of 1v: 20h towards drawing 1st year maintenance cost 2nd year maintenance cost 3rd year maintenance cost 4th year maintenance cost 5th year maintenance cost

Central Government/Public Sector

TRN :19270290 | 21 Oct, 2020

Tender Value : 0

Darrang - Assam

Tender for supply of supply of retro reflective board as per c-37 consisting one board of size: 900mm triangle made out of 2mm thick aluminium alloy sheet conforming to is 736 with fixing on 25x25x3 mm m.s. angle suaon frame.

Related Keywords : aluminium frame

List of latest aluminium-frame Tenders in Indian Tenders. Click on any aluminium-frame Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminium-frame Tenders.

Tender for rate contract for aluminium doors frames etc

Tender for supply of supply of retro reflective board as per c-37 consisting one board of size: 900mm triangle made out of 2mm thick aluminium alloy sheet conforming to is 736 with fixing on 25x25x3 mm m.s. angle suaon frame.

Get aluminium frame Tender Alert...

Related Keywords : aluminium frame

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us