Filters

List of air-lock-relay Tenders

List of latest air-lock-relay Tenders in Indian Tenders. Click on any air-lock-relay Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for air-lock-relay Tenders.

All-Tenders (9)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35378555 | 22 Sep, 2025

Tender Value : 0

Tiruchirappalli - Tamil Nadu

Tender for gem bids for spares, act seal kit with gasket 2dot5x5 sadc a, completeset of power cyl 2dot5x5 sadc b, act seal kit withgasket 08 x 14 btpc c, complete set of power cyl 08x 14 btpc d, act seal kit with gasket 12 x 14 btpc e, complete set of power cyl 12 x 14 btpc f, seal kitfor the positioner btpc sadc g, position feed backtrnsmtr btpc sadc h, position limit switch btpcsadc i, air lock relay btpc j

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35337011 | 01 Oct, 2025

Tender Value : 7.00 Lacs

Gautam Budnagar - Uttar Pradesh

Tender for gem bids for vehical, cylinder sleeve with coller set std piston stdwith pin and circlip piston ring set std big endbearing std cr bush main bearing std thrustwasher std valve inlet valve exhaust valve oilseal valve guide in let and exhaust pistoncooling jet with packing hydaraulic lash adjusterh l a with rocker assy w rff bs iv crank shaftmain oil seal front crank shaft main oil seal rear cam shaft front oil seal head gasket waterpump assy oil pump assy timing belt ac belt power steering belt air filter element fuel filterassy 3 pipe connected fuel filter assy 2 pipeconnected fuel filter element oil filter powersteering filter filter assy power steering enginegasket set complete clutch disc and pressureplate assy fly wheel assy release bearing pilotbearing fuel return leak off pipe with connector oil pressure switch hose pipe set comp set wiperblade lh rh brake disc pad front lh rh rearbreak shoe lh rh set wheel cylinder rear lh rh front shock absorber lh rh rear shock absorberlh rh thermostate valve timing belt tensioner timing belt idler pully belt tensioner assy small connecting rod bolt belt tensioner idler bush heater plug engine mounting lh rh cam shaftsensor comman rail pressure sensor fly wheelsensor temperature sensor crank sensor mapsensor hfm sensor hand brake cable radiatorcap clutch seeve cylinder lower hydraulicadopter csc fuel pipe filter to pump fuel returnpipe pump to tank two pice vaccuam pump assy piston with sleeve with ring std cylinder headcomp with valve cam shaft rocker shaft rocker bid number gem2025b6664340 dated 10-09-2025 bid document1 121 1 1 assy in let exhaust valve, engine o h gasket kit, pressure plate, disc clutch friction, spark plug, timing chain with gear, timing chain adjuster, oilseal set comp, chain with sporket set with gear, brake shoe rear, disc pad brake front, brake shoereturn spring, clutch cable, accelerator cable, crank bearing outer, crank case magnet housing, rubber coupling rear wheel, small axle, bearingwith hub rear, wheel bearing front, wheelbearing rear, foot rest front lh rh, foot restrear lh rh, clutch housing, front shockerabsorber lh rh, main relay 12 volts, speedometerassy, speedometer cable, speedometer gear, backlight assy, front indicator lh and rh side, rearindicator lh and rh side, rear brake mastercylinder, brake light switch, seat cover, fueelpipe pump to injector, fuel injector, air filter, oiltemperature sensor, fuel pump assy, sideindicator assy front both side, rear door outerhandel rh, dicky outer handel, door glassmachine lh rh, door glass machine handel lh rh, brake master cylinder assy, wheel cylinder assyrear, head light assy lh rh, front disc pad lh rh, side view mirrer lh rh, p shaft uj cross, clutchmaster cylinder, door opening catch lh sjde, fuelfilter, steering oil seal, tail light assy lh rh, steering dampher assy, radiator reservoir tank, wipper blade, steering gear box assy, clutch plate, clutch sleeve cylinder, rear view mirror lh rh, rear door dicky lock, horn 12 volts, horn 24volts, cluitch vaccum booster air assisted, pshaft center bearing, relay 24 volts all type, wipper aram, body side parking light 24 volts, starting switch push type, fan dc 24 volts 12 inch, side view mirror lh rh, fog light assy lh rh, wipper blade lh rh, head light assy with tube, ball joint lower upper tata safar, tie rod end tatasafar, shock absorber power steering tata safar i, tie rod end assy tata safar, air filter tata safar, wipper blade rh 24 inch mtata safar, wipper bladelh 20 inch tata safar, handel gripping, chain setcomplete, hydraulic pressure pipe hydraulic pumpto tank, head light assy with bulb 12 volts lh rh, wipper motor with arm with blade, combinationswitch assy, wipper blade rh lh scorpio, disc padbrake front scorpio, disc pad brake rear scorpio, m oil filter scorpiocylinder sleeve with coller set std, piston stdwith pin and circlip, piston ring set std, big endbearing std, cr bush, main bearing std, thrustwasher std, valve inlet, valve exhaust, valve oilseal, valve guide in let and exhaust, pistoncooling jet with packing, hydaraulic lash adjusterh l a with rocker assy w/rff bs iv, crank shaftmain oil seal front, crank shaft main oil seal rear, cam shaft front oil seal, head gasket, waterpump assy, oil pump assy, timing belt, ac belt, powersteering belt, air filter element, fuel filter assy 3pipe connected, fuel filter assy 2 pipe connected, fuel filter element, oil filter, power steeringfilter, filter assy power steering, engine gasketset complete, clutch disc and pressure plate assy, fly wheel assy, release bearing, pilot bearing, fuelreturn leak off pipe with connector, oil pressureswitch, hose pipe set comp set, wiper blade lh/rh, //bid details2 / 121

Central Government/Public Sector

TRN :35332693 | 20 Sep, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for fuel filter, lub oil filter, hydraulic filter, hydraulic pipes, injectors, injectors washers, tappet gasket, oil sumpgasket, fuel flexible pipe 19 oblique 19 mm, fuel flexible pipe 19 oblique 17 mm, fuel flexible pipe 13 oblique 17mm, fuel feed pump assy, air cleaner, accelerator cable, fan belt, self starter, alternator, starting relay, headlight assy, indicator assy, back light assy, wiper blade, idnition switch, wiper motor, brake booster, booster pressure pipe 6 mtr, booster pressure pipe 12 mtr, boom cyl seal kit, turbo charger, solenoid, self starter, oil filter, hydraulic filter, bucket cyl seal kit, boom cyl seal kit, teeth with locking pin

Central Government/Public Sector

TRN :35322201 | 03 Oct, 2025

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for gem bids for ic ha17324 bridge rectifier rs06 irf 840 yo1k h1 mosfet 1565 mos fet 1507 tr 2sc 2347 diode b2x55 logic board control ckt ic il n2003 an res 10ohm 1 w res 10 ohm half w potentiometervariable resistor w502 and w102 tr byv32 e 200 diode p6ke120a tr 639 tr ka 431az rectfier gs1b1560 opto cuppler l1602 ic moc 3041 tr bt 136 iclm 7805 ic tny 268 pn pic ic 16f 882 fet p30f10 fet2sc 3320 fet sf 3004 pt ic 3844 b ic lm 324 ic as358p mosfet irf 10n60 mosfet byv42ephv0449 mosfet 10n80 cap 100mfd 450v ic 1902cyb ic 4n35 choke fuse cartrige 3amps diode spn16n diodespr16r diode 5408 diode in4007 opto couplerel817 opto coupler m003041 411q cap 220 uf 450v ntc 100 mov 10d511k opto coupler 817 mosfetirf544 mosfet irf 3206 ic top 262en head strip 24pin classic transistor 13005 transistor 13009 transistor tl431 transistor c1815 mov 450v 10a mov 10 20 30 amp mov s14k300 for matrix epabx ntc 10d 9 fuse 4amp 5amp 10amp mur 3020 pt bt 151scr 01 104 picco ferrad capacitor cap1000 mfd200v cap 470 mfd 450v ic 4558p ic tny278 ic uc3845 res 22 ohm quarter watt resistance 022ohm 2w res 10 ohm wirewound res 1ohm 10wwirewound res10k 025w res 100 k 05w res 33k025w res 33k 025w res 47 k 025w pot resvariable 10k micro diode 1n5408 diode uf5408 schottky diode byv32e schottky diode mbr20100 zener diode 5v9v16v24v mosfet irfp 840 mosfet2sk962 mosfet 2sk962 3901 mosfet 10n60c mosfetirf p460 credle switch micro dpdt switch forsmps ptt switch 2 pole led green red yellowwhite opto coupler ic 812 bty connector and bid number gem2025b6651213 dated 10-09-2025 bid document1 111 1 1 socket for 25 w xirm 8668 dmr, relay12 v7 amp 250volt ac, carbon brush, tefflon tube, diode cq810-mur3060pt, ic ka75oobd, mosfet s1705, cap 470uf200w, ic ha 17324a, tny 278pn, mov b103k1ku, carbuarator, sparking plug, air cleaner filter, fuel pipe tank to fuel cock, fuel pipe fuel cock tocorburetor, fuel cock fuel on off switch, inletoutlet valve, gaskit set complete, element aircleaner, gaskit for corburetor, gaskit valveinspection cover, gaskit air cleaner filter, recoilstarter, fuel stainer, mosfet irf 460, head gearassembely, ribbon gear assembly, printer headdmp tvs msp 450 star and 270, logic card dmp tvsmsp 450 star and 270, power supply card, ntc 10 d, zener diode 12 v, resistance 0.56 ohm 5 w, resistance 0.46 ohm 5 w, zener diode 4147, transistor csl 100, diode p6ke62a, diode in 5402, cap 420 mfd 450 v dc for mpsu, ic 254, tci unit forhonda 650, fuel pipe tank to on off switch, diode6a4 scr, electronic svc kit, handle assembly svckit, loom wire with connector, sensitive cap redand black, on off slider switch, bty housing packkit, cam lock, lower shaft bush, middle shaftbush, upper shaft bush, bty housing cap, btyholder, upper shaft locking o ring, middle shaftlocking o ring, lower shaft locking o ring, opening tools kit, charging socket, on off switch, 5 volt 1.5 amp rating charger, 5 volt1.5 amprating charger, micro switch large, kit formodern hhmd, universal charging kit, kit formodern hhsl aska, on off switch spdt, led bulb 2w4w 6w 10w 15w, complete beam for super light iand ii, front glass for super light i and ii, frontcover for super light i and ii, 5 volt 1.5 ampcharger for led searh light, rocker key for gps, rocker switch rubber cover knob, usb port, microswitch for gps, 5v 1.5 amp rating charger for isatphone, micro switch, adopter 14.4 volt 2 amp forbty charger, micro usb charging port, powertransistor for motorola xirm 8668, control head20 pin connector strip fm circui, pre aplifiertransistor ada4743, volume control on off knob, channel knob, power jack, mosfet 9n90c, rectifierv30d20c, cap 50v 2200 mfd, cap 25 v 100 mfd, control card for 2 5 10 kva, dimmer state complete2 5 10 kva, rc timer constant, relay 12 volt 30 amp, transformer 18 volt, control board for ups650va, on off switch for ups, bty 12 volt 7 ahc, smps for dell optiplex 5050, smps for hp compaqelite 8300mt, processor fan, heat sink paste, onoff switch for cpu

Central Government/Public Sector

TRN :35268428 | 29 Sep, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for gem bids for crvmt057, gasket cyl head, piston ring set, cylinder postonassy, carburator assy, lock pin spring clutchoperating, gear fly wheel ring, assy tie rod, selfstarter assy, injection line 7 cylinder, injectionline cyl 2nd cly, hose air, float, cross pin, floatvalve, control valve, manual brake valve wabco, element oil filter, relay assy, regulator vehiclewindow, master cyl power unit, pump assy fuel, horn assy low, pinion19024305, holder assyrectifier, armature assy, filed coil assy, brushcarrier assy, drive assy, speedometer, bearing, assy oil filter, solenoid switch assy lu26964033, horn assy high tone, main relay, bodyn assythrottle, clutch rlease bearing self centring, sensor water temperature, wiper arm, link forwiper motor

Central Government/Public Sector

TRN :35268518 | 22 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for mt, star box steel star box plate star for vehicle car flag fordg car flag for adg car flag for ig car flag for dig national flag for vehicle pilot flag escort plate roverplate pilot plate siren police beacon light flag road commander light for flag rod fog light led pull push switch insulation tap roll lt wire 05 1 mm fuse mix all type fuse 10 15 20 amp battery terminal all type horn 12 24volt emery paper white paint duco red paint duco black paint duco special grey paint thinner red oxidepaint painting gun m seal fewi kwick big araldite n cputty body solder bulb 12 24v parking reflective tapeyellow reflective tape white reflective tape red formation sign heavy formation sign medium veh formation sign lt veh bridge classification sticker hvy veh bridge classification sticker med veh bridge classificationsticker light veh pop rivet hand grinder cutting blade welding rod 8 no welding rod 10 no welding glass banjowasher mix drill machine with bit multi meter nut boltmix ana bond tube 25gm pop rivet handler hexa bladeframe rexzine white welgrow black male female welgrow white male female led light for star box cablestrip plastic fan belt tubeless tyre repair kit oil filter1613 bus tc bs iv fuel filter 1613 bus wiper blade 1613bus body indicator assy 1613 bus fuel filter set tata 1212 wiper blade tata 1212 accelerator cable tata 1212 handbrake leaver with assy tata 1212 king pin upper tata 1212 king pin lower tata 1212 king pin bearing tata 1212 kingpin bush tata 1212 ddo repair kit tata 1212 door trim padtata 1212 fan belt tata 1212 rubber boot air cleaner pshaft cross tata 1212 back light glass tata 1212 sparkplug royal enfield oil filter re front disc pad re rear brakeshoe set re clutch cable re speedo meter cable re accilator cable re spark plug hh splendor passion clutch bid number gem2025b6630004 dated 01-09-2025 bid document1 132 1 1 cable hh, accilator cable hh, fuel filter mg, spark plug mg, air filter mg, accelerator cable mg, clutch cable mg, discpad front mg, rear brake shoe mg, wheel cly mg, fuel cutrelay mg, door stopper wire mg, door open handle outer, door glass regulator handle, door handle catch inner, doorlock mg, rear door lock mg, door hinge lr mg, rear doorhinge mg, door glass machine lr, radiator cap mg, coolantreserve tank, oil filter mg, complete foot mat mg, fuelpump motor mg, wheel cover mg, side view mirror chrome, wiper blade mg, shock absorber front rear mg, speedometer cable mg, bonnet catch cable mg, door trim pad lrmg, door trim pad rear mg, front seat lr mg, indicator lightassy front, indicator light assy rear, front grill logo mg, front grill complete, interior mirror mg, bumper protectorfront rear mg, p shaft cross mg, clutch accilator and breakpadal rubber boot, gear lever rubber boot, enginemounting pad lr, head light assy. mg, oil filter s10 scorpio, air filter scorpio, ac filter scorpio, fuel filter cartridge, hydraulic pump power s, water pump scorpio, horn relayscorpio, ac relay scorpio, disc pad scorpio, rear brake shoescorpio, wheel cylinder scorpio, clutch plate scorpio, pressure plate scorpio, release bearing scorpio, wiperblade scorpio, combination switch scorpio, bonnet lockwith wire, bonnet shocker scorpio, 4x4 axle left side, sideview mirror scorpio, solenoid switch scorpio, oil filter thar, air filter thar, ac filter thar, fuel filter thar, disc pad thar, rear brake shoe thar, wiper blade thar, clutch plate sml, pressure plate sml, release bearing sml, wiper blade sml, side mirror sml, oil filter main sml, oil filter by pass sml, fuel filter sml, air filter sml, wheel stud with nut sml, doorhinge diggi sml, diggi lock sml, tail light assy sml, brakeshoe front rear sml, solenoid switch sml, fly wheel ring sml, oil filter sumo, fuel filter sumo, disc pad sumo, brakeshoe rear sumo, air filter sumo, coolant hose pipe settractor, fan belt tractor, steering hose pipe tractor, alternator cut out plate, fuel filter plate tractor, steering oilfilter tractor, led light tractor, side mirror force traveller, oil filter force traveller, fuel filter force traveller, wiperblade force traveller, clutch plate al truck, pressure plate altruck, clutch release bearingstar box plate, star steel for vehicle, itbp dg flagfor car, itbp adg flag for car, itbp ig flag for car, itbp dig flag for car, national flag for vehicle, itbppilot vehicle flag, itbp escort vehice plate, itbprover vehicle plate, itbp pilot vehicle plate, siren, police beacon light, car flag road brass, commander light for flag rod, fog light led, pull &push switch, insulation tape roll, lt wire 0.5 1 mm, fuse mix all type, battery terminal all type, horn 12volt, horn 24 volt, emery paper, white paint ducofor vehicle, red paint duco for vehicle, black paintduco for vehicle, special grey paint for vehicle, thinner, red oxide paint for vehicle, painting gun, mseal, fevi kwik big size, araldite, n c putty forvehicle, body solder for vehicle, bulb 12 24vparking for vehicle, redium tape yellow, rediumtape white, redium tape red, formation sign heavyveh, formation sign medium veh, formation signlight veh, bridge classification sticker heavy veh, bridge classification sticker medium veh, bridgeclassification sticker light veh, pop rivet, handgrinder cutting blade, welding electrod 8 no, welding electrod 10 no, welding glass, banjowasher mix, drill machine with bit, multi meter, nutbolt mix for special vehicle, ana bond tube 25gm, //bid details2 / 132

Related Searched Keywords : air lock relay

List of air-lock-relay Tenders

Get air lock relay Tender Alert...

Related Searched Keywords : air lock relay

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us