Filters

List of latest Granite-Work Tenders in Indian Tenders. Click on any Granite-Work Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for Granite-Work Tenders.

All-Tenders (16)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :19329792 | 03 Nov, 2020

Tender Value : 0

Thiruvananthapuram - Kerala

Tender for supply and setting up of lab- island bench : 6800lx1200bx900hmm island table with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature bottom arrangements: 1 door 2 drawers- 750mm : 12 nos with lock and key drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set . : leg space assembly: 6 nos electrical points : 16 nos electrical : suitable duct/trunking made of 18mm thick boiling water proof plywood must be provided for electrical cable management .all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. work top: 18 ±1mm thick jet black granite work top island bench with sink : 6800lx1200bx900hmm island table with 18 ±1mm thick jet black granite work top, the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 12 nos, 1 door 1 drawer 450mm- 4 nos with lock and key, sink base unit-500mm-3 nos both the sides openable drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 no to be provided electrical points : 24 nos electrical : suitable duct/trunking made of 18mm thick boiling water proof plywood must be provided for electrical cable management .all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. reagent rack - 2 tier reagent rack with glass shelves -4.2 mtrs two height adjustable reagent rack made out of toughened glass of minimum thickness 6mm with frame work of epoxy powder coated steel section of shs 25x25x2mm as support.sutable duct/trunking made of 18mm thick boiled water proof plywood shall be provided for electrical cable management along with frame. pp sink: 3 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx750hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top chemical storage cupboard 900lx500bx2100hmm- made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates lockable opaque storage cupboard 900lx500bx2100hmm- made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates bio & fisheries lab island bench : 6800lx1200bx900hmm - island bench with 18 ±1mm thick jet black granite work top. the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 8 nos, 1 door 1 drawer 450mm- 4 nos with lock and key, sink base unit-500mm-3 nos both the sides openable drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, leg space assembly with back panel: 4 nos electrical points : 24 nos electrical : fixed in a slanting quadruplet electrical pedestal box and four numbers of electrical fittings also will be provided..all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. pp sink: 3 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx750hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top 4 specimen storage cupboard 900lx500bx2100hmm lockable opaque storage cupboard 900lx500bx2100hmm- 3 made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates hs computer lab wall bench : 5700+6000+5700lx750bx750hmm wall bench with 25mm melamine work top. construction : c frame frame structure used shall be of high quality mild and degreased steel conforming to relevant is codes. the c-frame steel section shall be of epoxy powder coated minimum 60 microns conforming to is-13871 for chemical resistance, scratch resistance and to prevent rusting and having a minimum size of 60×40×2mm and shall be joined by bead welds conforming to is: 822- 1970 grinded smooth. the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. filler panels: 1 set to be provided . electrical points : 28 nos electrical : suitable duct/trunking made of 18mm thick boiling water proof plywood must be provided for electrical cable management .all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches and fitting makes should be either legrand, crab tree, northwest and wires from polycab, v guard, finolex. single data socket - 28 nos work top: 25mm thick melamine worktop island bench : 3500lx1500bx750hmm 1 set island bench with 25mm melamine work top. the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 6 nos with lock and key, drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, leg sapce assembly with back panel -6 nos electrical points : 12 nos electrical : suitable duct/trunking made of 18mm thick boiling water proof plywood must be provided for electrical cable management .all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. single data socket - 6 nos work top: 25mm thick melamine worktop teachers table 1500lx600bx750hmm- 1 set the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top cd rack storage 1000lx500bx2100hmm lockable almirah 900lx500bx2100hmm first floor- physics lab island bench : 1500lx1500bx900hmm island table with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature bottom arrangements: 1 door 1 drawer-450mm : 4 nos with lock and key drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set . : leg space assembly: 2 nos electrical points : 16 nos electrical : suitable duct/trunking made of 18mm thick boiling water proof plywood must be provided for electrical cable management .all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. work top: 18 ±1mm thick jet black granite work top wall bench : 2450lx500bx700hmm wall bench with 18 ±1mm thick jet black granite work top, the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 2 nos, 1 door 1 drawer 450mm- 2 nos with lock and key, drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx700hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick highpressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top lockable opaque storage cupboard 900lx500bx2100hmm- made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates chemistry lab island bench with sink :6800lx1200bx900hmm island bench with 18 ±1mm thick jet black granite work top. the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 14 nos, with lock and key, sink base unit-500mm3 nos both the sides openable drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, reagent rack - 2 tier reagent rack with glass shelves. two height adjustable reagent rack made out of toughened glass of minimum thickness 6mm with frame work of epoxy powder coated steel section of shs 25x25x2mm as support.sutable duct/trunking made of 18mm thick boiled water proof plywood shall be provided for electrical cable management along with frame. electrical points : 24 nos electrical : fixed in a slanting quadruplet electrical pedestal box and four numbers of electrical fittings also will be provided..all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. pp sink: 3 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx750hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top chemical storage cupboard 900lx500bx2100hmm lockable opaque storage cupboard 900lx500bx2100hmm- 3 made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates bio & fisheries lab wall bench : 2500lx1000bx900hmm \ wall bench with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 1nos, 1 door 1 drawers- 45mm : 2 nos, with lock and key, sink base unit 750 mm 2 doors - 1 no drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, back supporting frame : 100mm- 2 nos pp sink: 1 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x 560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction gas outlet: 90 deg gas outlet- 2 nos work top: 18 ±1mm thick jet black granite work top island bench : 3000lx1200bx800hmm wall bench with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 2 nos, 1 door 1 drawer 450mm- 4 nos with lock and key, base unit for sink- 500mm- both the sides openable drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, leg sapce assembly with back panel -1 nos pp sink: 1 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction gas outlet: 180 deg gas outlet- 1 nos, chimney: 1 no, gas stove : 1 no work top: 18 ±1mm thick jet black granite work top wall bench : 2367+2300lx500bx900hmm wall bench with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 5nos, drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx750hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top lockable opaque storage cupboard 900lx500bx2100hmm- made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates biology lab island bench : 5800lx1200bx800hmm island bench with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 6 nos, 1 door 1 drawer 450mm- 4 nos with lock and key, base unit for sink- 500mm- both the sides openable -2 nos drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, leg sapce assembly with back panel -2 nos electrical points : 16 nos electrical : fixed in a slanting quadruplet electrical pedestal box and four numbers of electrical fittings also will be provided..all the electrical fittings should be for a voltage of 220/240v ac 50hz. 15/5 a combined sockets for both round and square pins with switches. pp sink: 2 nos sink: in one piece, moulded sink in solid epoxy, polypropylene pp construction of dimension 360 x 560 x 220 mm w d h. sink outlet shall be provided with a large bottle trap in pp construction gas outlet: 180 deg gas outlet- 2nos work top: 18 ±1mm thick jet black granite work top wall bench : 2000lx500bx900hmm wall bench with 18 ±1mm thick jet black granite work top the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 2 drawers- 750mm : 2nos, 1 door 2 drawers- 450mm :1nos, drawer units are made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging are pressed at high temperature. the joinery construction is mini fix joints with wooden dowel. filler panels: 1 set, work top: 18 ±1mm thick jet black granite work top teachers table 1500lx600bx750hmm- the carcass:-, the carcass is constructed with 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates. the edges are sealed with 0.5 mm thick pvc edge tapes. the lamination and edging will be machine pressed at high temperature. bottom arrangements: 1 door 1 drawer 450mm- 4 nos with lock and key, filler panels: 1 set . leg space assembly: 6 nos work top: 25mm thick melamine top lockable opaque storage cupboard 900lx500bx2100hmm- speciment storage cabinet 900lx500bx2100hmm skeleton storage cupboard 900lx500bx2100hmm - made of 18 mm bwp and is laminated with 0.8 mm thick high pressure melamine laminates for grfthss valiyathura re-tender

Central Government/Public Sector

TRN :19334756 | 31 Oct, 2020

Tender Value : 7.96 Lacs

Indore - Madhya Pradesh

Tender for fixing of granite in lift shaft. fixing of granite, repair, painting work in the shaft of freight lift of cse -1, phy - 1, and phy -3 at

corporations/Associations/Others

TRN :19322345 | 04 Nov, 2020

Tender Value : 22.77 Lacs

Bargarh - Orissa

Tender for power supply, installation of pump sets and energisation of bamrit-ii l.i. project under paikmal block earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete 1:4:8 with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with k.b. brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar 1:6 in foundation & plinth etc. complete as per the engineer-incharge. a in foundation and plinth b in super structure cement concrete 1:2:4 with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc complete as per the direction of the engineer-incharge. rigid smooth centering & shuttering for r.c.c. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the engineer-incharge. a plinth bend r.c.c. work in c.c. 1:2:4 including hoisting & laying & curring for 28days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 12mm cement plaster in cement mortar 1:6 finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. supplying, fitting and placing uncoated hysd bar rain for cement complete as per drawing and tachnical specification as per the direction of engineer incharge. writing charges of required data on the wall of pump chamber/transporency pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. fitting of un plasticised all dia pvc pipe for all classes including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of ms riser tee for outlet, equal tee etc. including cost of pvc pipe, cost of solvent cement, transportation of pipe complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. a 200mm class-i 2.5kgf/cm2 pvc pipe b 200mm class-ii 4kgf/cm2 pvc pipe c 160mm class-i 2.5kgf/cm2 pvc pipe filling the foundation and plinth with excavated material as directed by the engineer-incharge. a hard soil 15 hp monoblock pumpset 28mtr head to discharge 28.4lps control pannel board, 5kva capacitor with 15hp asd starter & mcb including internal wiring with 4mm2 pvc single core copper wire cost of motor hood cost of base plate cost of 3 x 16mm2 t.d. cable including laying underground cost of 7/20 pvc wire cost of 100 mm ø g.i. pipe cost of 100 mm ø g.i. bend cost of 100 mm ø c.i. foot valve cost of 100 mm ø g.i. flange cost of 200 mm ø m.s pipe cost of 100 mm ø sluice valve cost of 100 mm ø c.i. reflux valve nr cost of 80 mm ø air release valve with ms/gi saddle & raiser pipe cost of 200 mm ø ms flange cost of 200 mm x200 mm x 160 mm ø ms tee cost of 200 mm ø pvc end cap cost of 160 mm ø pvc end cap cost of 200 mm ø pvc coupler 4 kg/cm2 cost of 160 mm ø pvc coupler 4 kg/cm2 cost of 100x100x25mm g.i. tee with plug for priming cost of 200mmx100mm ø ms reducer cost of welding laying and fitting of 200mm ø ms pipe cost of 200mm dia m.s. coupler cost of 160mm ø butterfly valve with all fittings 160mm ø ms pipe 1mtr. length, 160mm ø socket-2 nos. and flange-2 nos. cost of 160 mm x 160 mm x 100 mm ø gi raiser tee with accessories cost of 200 mm x 160 mm ø pvc reducer cost of misc. welding charges for z joint, s bend, y joint etc. cost of nut bolt cost of rubber insertion fitting of air release valve cost of outlet labour charges for delivery and fitting including fitting of priming tee, sluice valve, nr valve, air release valve and riser tee etc and installation cost for electrical installation and energisation in complete shape supply of small t&p kit comprising of hand gloves-1 pair, tester-1 no, 8 inch cutting plier -1 no, 12 inch sly wrench-1 no, 12 inch screw driver-1 no., 24/27 & 21/23 de spanner-2 nos., 24/27 & 21/23 ring spanner- 2 nos. taparia cost of digitiliation of pre / post photo, display board in acp sheets with informatary information as per ridf guide line including fixing all. part-b construction of 3 phase, 3 wire 11 kv line as per rec standard confirming to re rules 1956, with 400 kg., 10 mtr. long psc pole support in 50 mtr. span., 100 sqmm aaa xlpe insulated conductor unarmoured with double disc arrangement, 11 kv “v” cross-arm with required nos. of 11 kv b & s disc insulator and 11 kv pin-insulator carping and padding of poles, danger board at each pole anticlimbing device stay set at each bending point and double stay at end point with 18mm gi ht stay concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection and commissioning etc. complete including painting in navy blue colour band with inscription of olic in each pole. construction & erection of 11/0.416 kv, d.p.mounted sub-stations of different capacity confirming to re rules, 1956 mounted on 2.44 mtr. long structure, supported in 400 kg. 10 mtr. long psc pole, transformer hard channel & top channel made 0f 2.8 mtr. long 100x50x6 mm m.s. channel, transformer belting on 2.8 mtr. long 50 x 50 x 5 mm m.s. angleall rec.spn. std.f-3 with all accessories like 3 pole 11 kv hg fuse f-5 & a.b.switchesf-9 both mounted on 2.8m long 75x40x6 mm m.s. channel and supported by 1.0 mtr. long 50x50x5 mm m.s. angle with 3 nos. 11 kv lightening arrestors and distribution box, pipe earthingf-2, including cost of 50 sqmm 3.5 core pvc cable carping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e. required size nuts & bolts, brackets, cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including barbed wire fencing. 63 kva - bee 1 star rating with bis level-ii construction of 3 phase l.t. line with supports of 300 kg psc pole of 9 mtrs. long of span length 40 mtrs. with 3x50+1x35 mm2 xlpe a.b. cable with required materials, pannel, etc. including cost of materials, labour, transportation etc. complete. earthing

Central Government And Public Sector

TRN :19309841 | 27 Oct, 2020

Tender Value : 81.55 Lacs

Jhansi - Uttar Pradesh

Tender for mining work at teh sadar me babina river pranali ke vibhan richoo per khudai me nikle hard rock and granite rock khanda-bolder

State Government

TRN :19313018 | 27 Oct, 2020

Tender Value : 4.49 Lacs

Solapur - Maharashtra

Tender for special repairs to anganwadi no. 4 and 6 at mardi excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. lift upto 1.5 m. by mechanical means ssr p.no. 259/21.02 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. lift upto 1.50 m by mechanical means ssr p.no. 259/21.06 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant pan mixer etc. complete. with fine aggregate natural sand / crushed sand vsi grade finely washed etc ssr p.no. 287/24.01 providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. ssr p.no. 329/28.04 providing and laying cast in situ/ready mix cement concrete in m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. excluding reinforcement and structural steel.with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant pan mixer etc. complete. with fine aggregate natural sand / crushed sand vsi grade finely washed etc ssr p.no. 304/26.23 providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. ssr p.no. 373/32.17 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete ssr p.no. 315/27.05 providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete ssr p.no. 368/32.08 providing and fixing 50 mm. dia. medium class g.i.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. ssr p.no. 243/23.05 providing and fixing heavy duty inter locking concrete coloured paving blocks of 80 mm thickness of having a strength of 300 kg/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete ssr p.no. 383/33.52 providing and laying rough shahabad stone flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 c.m. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. ssr p.no. 379/33.01 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, excluding reinforcement and structural steel with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant pan mixer etc. complete. with fine aggregate natural sand/crushed sand vsi grade finely washed etc ssr p.no. 302/25.70 providing and laying damp proof course 50 mm thick in m20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. ssr p.no. 355/31.01 providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. ssr p.no. 398/35.13 test of c. c. cube - compressive strength of c. c. cube ssr p.no. 569/20

Central Government/Public Sector

TRN :19298098 | 03 Nov, 2020

Tender Value : 2.30 Crore

Dehradun - Uttaranchal

Tender for supply and installation of tools and die makers die and moulds trade equipments machinery - chisel cold flat with handle file flat smooth with handle knife edge file with handle allen key metric file flat second cut with safe edge with handle file triangular second cut with handle hammer cross peen 9v dc battery with cap straight edge-single beveled-size file triangular bastard with handle file square second cut with handle scraper flat file square bastard with handle snips metric screw pitch gauge-range tool makers clamp c clamp file half round bastard with handle file half round second cut with handle file round bastard with handle hammer ball peen star dresser diamond dresser with holder d.e spanners centre drills pin gauge set file card/ file spattle chisel cross cut with handle chisel half round with handle chisel diamond point chipping guard bench stop with handle tap extractor screw extractor sizes feeler gauge single angle cutter needle file assorted 12 nos. with handle dovetail cutter radius gauge single angle cutter tool holder straight to suit cylindrical milling cutter mm slitting saw cutter solder iron, solder lead, pcb board groove board, solder wick slitting saw cutter digital multimeter scribing block universal drill chuck bench vice fire buckets with stand twist drill with st. shank twist drills magnetic stand with magnetic base relay, led side and face milling cutter parallel shank end mills knurling tool straight & diamond concave milling cutter convex milling cutter side and face cutter parallel hand reamer universal vernier caliper-range v-block-approx. disc type form milling cutter boring bars with holders bore gauge with dial indicator granite surface plate taps and dies metric taper shank drills angle plate-adjustable parting tool holders to suit dial vernier caliper vernier caliper-range sine bar with stopper plate angle plate inside micrometer range universal cylindrical grinding machine cnc lathe/cnc turn centre power chord, connecting probes, single strand & multi strand wires t slot cutter with parallel shank outside micrometer equal angle cutter outside micrometer v-block-approx shell end mill shell end mill c.i. surface plate outside micrometer depth micrometer fire extinguisher magnetic v-block dial test indicator-lever type- range dual power supply inductor variable resistance box, resistors function generator dial test indicator plunger type-range shearing machine lever typehand operated polishing kit telescopic gauge range double ended pedestal grinder demagnetizer vernier bevel protractor-blade range sensitive drilling machine power hacksaw machine slip gauge box workshop grade - sensor kit with ascessories mentioned in parts requirement as mentioned in bid document sine table with magnetic bed pillar/column type drilling machine hand injection moulding machine muffle furnace rockwell hardness testing machine with standard accessories radial drill machine tool & cutter grinder universal milling machine horizontal and vertical milling machine screw type injection moulding machine spark erosion edm with standard accessories ss and sccentre lathe all geared hydraulic surface grinding machine cnc milling machine/ vertical machining centre vmc co-ordinate measuring machine optional synchronous motor, capacitor for synchronous motor vernier height gauge hand compression moulds for upgradation of priority itis

State Government

TRN :19298769 | 16 Nov, 2020

Tender Value : 0

Mayurbhanji - Orissa

Tender for construction of civil cadwm excavation of foundation to proper profile in all kinds of soil with all leads and lifts including dressing and leveling the bed to proper slope and level and making it fit for laying concrete and depositing the excavated materials clear of work site within all leads and lifts etc including dewatering from foundation if necessary etc with supply of all labour, all taxes as per prevailing norm and t&p required for the work etc complete in all respects as directed by the engineer-in-charge. earth work in excavation in all kinds of soil with all leads and lifts to proper slope and profile as per the requirement including the rough dressing and breaking clods to a maximum 5 to 7 cm and laying in layers not exceeding 0.23 m in depth in proper slope and profile alongwith supply of all labour and tools & plants, all materials, labour including all taxes as per prevailing norm & supervision charges to complete the item of work as per design, drawing and specification and as per the direction of the engineer-in-charge. measurement will be taken in the finished approved level section 1/6th volume will be deducted towards settlement for embankment only.if mechanical excavation is doen, rateswill be reduced accordingly filling foundation & plinth with excavated materials including watering & ramming to all heights with all leads & lifts with supply of all labour, all taxes as per norm and t&p required for the work etc complete in all respects as directed by the engineer-in-charge. watering earth work upto the o m c condition and compaction by sheepfoot rollers /by standard vibrator / short drum width vibratory power roller to earth layers not exceeding 22.5cm to 95% of mdd maximum dry density including hire and running charges of the all machineries, labour, all taxes as per prevailing norm, t&p and water complete as per direction of engineer-in-charge. measurement to be taken on the finished compacted section of the fill under o m c condition. providing cement concrete m15 grade with nominal reinforcement excluding cost of m.s. rod, carriage and labour for cutting, bending, binding and fixing of m.s. rod using 20mm and down, graded, crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves wherever necessary including cost, conveyance, royalty and other taxes of all materials, with all cost of tools and plant, cost and carriage of water etc, with supply of all labour, taxes as per prvailing normand supervision charges including mobilisation & de-mobilisation of men & machineries, t&p with all incidental charges required for the work complete in all respect as directed by the engineer-in-charge. providing cement concrete m20 grade for rcc works on approved surface or shape and size using 20mm and down graded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, excluding cost, carriage of m.s. rod and labour for cutting, bending, binding and fixing of m.s. rod with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, t&p with all incidental charges required for the work complete in all respect as directed by the engineer-in-charge. providing rigid, smooth centering & shuttering for concrete works including false work and including cost, conveyance, royalty & other taxes of all materials required for the work complete in all respect and dismantling the same after casting and curing with water for specified period including depositing the debris clear of work site with all leads & lifts, delfts including supply of all labour, all tases as per prevailing norm and t & p required for the items etc. complete in all respect as directed by engineer-in-charge. for foundation & plinthlining form work included in concrete item supplying, fitting & placing hysd bars reinforcement and tying the grills as per approved design & drawing and placing in position including cost, conveyance, royalty and other taxes binding wires of 18 to 20 gauge with supply of all labour, taxes as per prvailing norm and t&p required for the work etc, complete in all respect as directed by the engineer-in-charge. weight of the binding wire will not be included in the measurement for payment fine dressing of earth work in slope of dam & canal embankment including trimmed to required profile and turfing with best compacted dub grass sods with all leads and lifts including periodical watering with labour, all other taxes as per prevailing norm and t & p till survival of the turf etc. complete in all respect as directed by the engineer-in-charge. measurement and payment will be made on survival of the turf. dismantling brick or stone masonry in clay, lime or cement mortar including stacking the useful materials for reuse and removing the debris with all leads & lifts including all labour, taxes as per prvailing norm, t & p etc. required for the item & as per direction of engineer-in-charge. supplying and laying rcc spun pipes including cost, conveyance, royalties and all taxes of rcc spun and including supply of all labour, taxes as per prvailing norm and t&p etc. to complete the work or as directed by the engineer-in- charge. 150 mm 700 mm supply, transportation, erection, fitting and fixing approved type of moulded measuring devices cut throat flumes of required discharge capacity made out of fiberglass reinforced plastic mould frp at the specified location with hold fasts embedded in m-20 grade of concrete including curing of concrete till it attains required strength etc. as per the direction of the engineer-in-charge. providing rectangular reinforced cement concrete channels of sizes 30 cm x 30 cm or 40 cmx 40 cm for command area development cad-wm in cement concrete m15 grade using 20mm down graded crusher broken hard granite stone aggregate of approved quality quarried, free from weathered skin surface and any deleterious materials using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering laying the concrete in position to proper slope and level as per the standard size and specification & model section with keys, bends, turnouts, providing contraction joints and filling with approved sealing materials including use of aea air entraining agent in the concrete mix and supply of all materials, labour and machineries, compacting with plate/needle vibrator and finishing the concrete surface including excavation of channels on the approved alignment and fixing & re-fixing of alignments for the channel for laying the cad-wm channel alongwith trimming, dressing, watering and compacting to the spoil banks to proper sectioning, providing beads and grooves etc, cutting trenches for the channels, keys as indicated in the approved drawing, curing the concrete for the required time with supply of all materials including cost, conveyance, royality, all labour and t&p complete as directed by engineering - in-charge. works package id mbj35 one minor irrigation projects

State Government

TRN :19301162 | 26 Oct, 2020

Tender Value : 4.39 Lacs

Satara - Maharashtra

Tender for construction of concrete gutter at kodoli tal 14 fan bhosale colony excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete. item / page no : 2 / 197 specification no : bd.a.1 spec. page no : 259 providing and laying cast in situ/ready mix, cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based programmable logic control with supervisory control and data acquisition enabled reversible drum type mixer. - with fine aggregate natural sand / crushed sand vsi grade finely washed etc item / page no : 1 / 226 specification no : bd.e.1 spec. page no : 287-288 additional specifications : with additional specifications for controlled concrete. providing and laying cast in situ / ready mix cement concrete m-15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra wooden centering will not be allowed. with fully automatic micro processor based programmable logic controller with supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant pan mixer excetra complete. with fine aggregate natural sand / crushed sand vsi grade finely washed etc item / page no : 8 / 227 specification no : bd.e.4, b-7 spec. page no : 289-290, 38-40 additional specifications : with additional specification for controlled concrete. providing and fixing in position thermo mechnically treated fe-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. item / page no : 33 / 245 specification no : bd.f.17 spec. page no : 306 royalty charges for various building construction bonafied materials which are used for government bonafied works and for which royalty charges are to be paid by the contractor. item / page no : 3 / 0 additional specifications : 1. government of maharashtra, revenue and forest department gazette number 67 dated 15-5-2015 and government of maharashtra public works department state schedule of rates 2017-18 general note number 4.3. 2. above / below percentage quoted by the contractor will not be applicable for this item. providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge 1.25mm thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 milimetre frame with properly cross braced mild steel angles of size 35mmx35mmx3mm duly painted including two mild steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour etc complete. spec. number as directed by engineer in charge item / page no : 36 / 73 specification no : morth-801 spec. page no : --- additional specifications : the work shall be carried out as per instructions of engineer in charge. laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by vigilence and quality control circle, pune. item / page no : 4 / 0 additional specifications : 1. the amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the vigillence and quality control office with the name of work mensioned on it.fineness modulus sieve analysis, silt and clay content test for sand 1 test per source compressive strength of cement concrete cube 1 test for quantity upto 5 cubic metre, 2 tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 tests for quantity above 30 cubic metre and upto 50 cubic metre. for quantity 50 cubic metre and above - 4 tests + 1 test for each additional 50 cubic metre

State Government

TRN :19261876 | 27 Oct, 2020

Tender Value : 25.70 Lacs

Bhubneshwar - Orissa

Tender for periodical maintenance of 5 years completed pmgsy road such as road-a nh 5 to janlapackage no or-18-adb-15, road-b pwd road to haripur clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and diposal of unserviceable materials and stacking of serviceable material to be used of auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness and as per direction of engineer-in-charge.road a road b providing and laying for scraping cleaning the road surface applying tack coat using 3.00 kg of bitumen for 10.0 sqm and laying 37.5mm thick built up spray grouting in one layers using 0.45 cum of 25mm to 40mm size crusher broken hard granite material and 12.00 kg penetration grade of bitumen for 10 sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10sqm spreading over and laying including heating, pouring and spreading over and spreading bitumen metal and chips and rolling with prr including hire and running charges of prr and all other machinaries including cost, conveyance, royalty, taxes, labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. road a road b providing and applying tack coat with bitumen emulsion using emulsion distributor at the rate of 0.20 kg/sqm on the prepared bituminous surfaces cleaned with mechanical broom as per clause 503 of mosrt&h specifications including cost, conveyance, royalty, taxes, labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. road a road b providing and laying bituminous macadam hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site laid over a previously prepared surface with a hydrostatic pavor finisher with sensore control to the require grade, lavel & allingiment, rolling with smooth wheeled, vibratory & tendem rollers to achive the desire compaction as per cluse 504 of mosrt&h specifications for road & bridge works 4th revision as per direction of the engineer-in-charge.road a road b providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of 10mm nominal size grading-ii premixed with bituminous binder of vg-30 of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of mosrt&h specifications for road & bridge works 4th revision including cost, conveyance, royalty, taxes, labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. road a road b construction of embankment with approved material obtained from borrow pits with all lifts & leads transporting to site by mechanical means within a lead of 5km spreading, grading to required slope and compacting to meet requirement of tables 300-2 & clause 305 of mosrt&h specifications for road and bridge works 4th revision and as per direction of the engineer-in-charge.road a road b providing and laying moorun on road flanks in layers not exceeding 75mm thick including dressing to proper slope with all cost, conveyance, royality, taxes of all materials and labour with t&p required for the work etc. complete as per specification and direction of the engineer-in-charge. road b reinforced cement concrete m-15 grade kilometre stone of standard design as per irc-8 fixing in position including painting & printing etc as per the drawing & technical specification clause 1703 of mord and as per direction of the engineer-in-charge.ordinary km stoneroad a road b 200 mtr stoneroad a road b providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of mord for rural roads of required shade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing clause 1701.2.2 etc. complete as per specifiation and direction of the engineer-in-charge.600 mm equilateral triangleroad a road b 600 mm circularroad a road b 800 x 600 mm rectangularroad a road b

corporations/Associations/Others

TRN :19239282 | 27 Oct, 2020

Tender Value : 1.25 Crore

Baramulla - Jammu And Kashmir

Tender for finishing work by way of plastering /pop/ wall putty/tile and granite work for boys hostel left wing of medical college.

Related Keywords : granite work

List of latest Granite-Work Tenders in Indian Tenders. Click on any Granite-Work Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for Granite-Work Tenders.

Tender for fixing of granite in lift shaft. fixing of granite, repair, painting work in the shaft of freight lift of cse -1, phy - 1, and phy -3 at

Tender for mining work at teh sadar me babina river pranali ke vibhan richoo per khudai me nikle hard rock and granite rock khanda-bolder

Tender for finishing work by way of plastering /pop/ wall putty/tile and granite work for boys hostel left wing of medical college.

Get granite work Tender Alert...

Related Keywords : granite work

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us