Latest and live tenders published in pakistan. Click on any tender to view further details.

supply of concrete oil as per following specification,viscosity @ 40oc,density @ 15oc,flash point,

supply of furnace oil as per specification mentioned in tender documents required for concrete sleeper factory, khanewal.

supply of circuit breaker having capacity 1250 amps front connection double hole rated insulation voltage 1000-v rated impulse with stand voltage 12-kv rated short circuit breaker capacity 100-ka rated short time circuit breaker with stand capacity 85-ka incompare with solid state trip device: make:- mitsubishi, siemens, hitachi, japan or equivalent.

supply of complete high pressure centrifugal pumping plant i.e pump suitable motor coupling and its starter) panel for fire fighting pump eta 100-50/2 discharge=85m3/h head 77-5mfls meter) rpm=1470 working voltage 400 volts at 50 hz make ksb germany or equivalent.complete high pressure centrifugal pumping plant i.e pump suitable electric motor coupling and its starter) panel for normal supply pump type wkl65/2 discharge=60m3/h head 60mfls meter) rpm=2900 working voltage 400 volts at 50 hz make ksb germany or equivalent.complete high pressure centrifugal pumping plant booster monoblack) pumping plant for normal supply pump type eta 100/33 discharge=550 imp-g-pm head 90 feet rmp=1470 line size 6”, 4” make ksb germany or equivalent.

supply of power amplifier 230 vac 50hz out put 120w. make saab model toya germany, usa, malaysia) or equivalent, model-sa912a.wall speaker line volt 70 or 100 volt make saab toya). sbs 51 gemany, usa, malaysia ) or equivalent,conference mic pre amplifier having 12 mic make htdz model ht 2000 a or equivalent. germany, usa, malaysia),conference mic having light on the top of mic with 30 ft mic cable model ht-d32 or equivalent, germany, usa, malaysia),mic cable for speaker net working ,cable 40/76 flexible,male female connector

supply of heavy duty revolving tail stock centre with following specification:- taper = 4mt. max. work piece weight =800kgs. max. concentric error = 0.005mm. max. rotational speed = 3800rpm. length from gage line to tip of centre =102.5mm. head diameter =70mm. point diameter =32mm. shank diameter =31.267mm point length = 41mm, point angle =60º. made in japan or any european country. heavy duty revolving tail stock centre with following specification:- taper = 5mt. max. work piece weight =2000kgs. max. concentric error = 0.005mm. max. rotational speed = 3000rpm. length from gage line to tip of centre =129mm. head diameter =90mm. point diameter =40mm. shank diameter =44.399mm. point length = 50.5mm. point angle =60º, made in japan or any european country.heavy duty three jaw drill chucks geared type with key similar to romh prima germany or uk. size = 0.5- 8 mmheavy duty three jaw drill chucks geared type with key similar to romh prima germany or uk. size = 3.0-16 mm

supply of ordinary portland cement

supply of sulphate resisting cement

supply of m.s. round 9.4 mm dia plain

supply of m.s.round 9.4 mm dia deformed