Latest and live tenders published in united arab emirates. Click on any tender to view further details.
supply of hard disk;p.n. 781516-21;600 g 10k sas for hp dl360 g9 with installation of windows r2 2012 and office 2010 to e configured at site . raid 5 to e configured.supplier should provide material with 1 year warrantyfor more clarification you may contact:rakif sair shai kh- 0528675412
supply of all valve; mtrl: pvc-u; gaskets and o-rings: viton; size 1/2 inch; pr - pn16 ;make and origin: george fischer usa / switzerland. with sol vent cement sockets., all valve; mtrl: pvc-u; gaskets & o-rings: viton; size 3/4 inch; pr - pn16;ma ke & origin: george fischer usa / switzerland. with s olvent cement sockets, all valve; mtrl: pvc-u; gaskets & o-rings: viton; size 1 inch; pr - pn16;make & origin: george fischer usa / switzerland. with sol vent cement sockets., all valve; mtrl: pvc-u; gaskets & o-rings: viton; size 2 inch ; pr - pn16;make & origin: georg e fischer usa / switzerland. with solvent cement sock ets., check valve; mtrl: pvc-u; gaskets & o-rings: viton; size 1 inchpr - pn16;make & origin: geor ge fischer usa / switzerland. with solvent cement sock ets. gf type: 561, pvc socket; mtrl- pvc-u; size - 1/2 inch ; pr - pn16 make & origin: george fischer usa / switzerland, pvc socket; mtrl- pvc-u; size - 1 inch ; pr - pn16 make & origin: g eorge fischer usa / switzerland., pvc socket; mtrl- pvc-u; size - 2 inch; pr - pn16 make & origin: george fischer usa / switzerland, flange;size 1 inch pr pn16 mtr l pvc u class e with adaptor rotating flange ringswith solvent cement sockets serrated face serv. flu id conc. chlorine dioxide make origin george fischer usa or switzerland, reducer ush;size 2 x 1 inches pr pn16 mtr lpvc u class eservice fluid conc. chlorine dioxide with solvent cement socketsmake origi n george fischer usa or switzerland., reducer ush;size 1 x 1/2 inches pr pn16 mtr l pvc u class ewith solvent cement sockets service fluid conc. chlorine dioxidemake ori gin george fischer usa or switzerland.
supply of atlas copco roto - inject fluid.luricant for single stage oil, injected screw compressors - ga gx compressors. pn 2901 0245 01 suit ale for atlas copco ga22 ff air compressor.sr no. api292960, p max 9.8ar, qv 48.01 l/s
services required for rectification of leakages and defects in dg set atkra ss. vendor shall do site visit to analyze the defect efo re quoting. contact person mr ponchristopher moses 04-32-29332 : email -ponchristopher.moses@dewa.gov.ae
supply of fin tues economizer-upper and lower part, tue od-38mm-length-21126mm-thickness-2.8mm, fin type-solid-fin od-64mm-fin thickness-1.30m m-tue material-sa-210a1-fin material-caron steel, dwg no-25964-131-05 & 25964-106-05, fin tues evaporator-lower part, tue od-38mm-length-21126mm-thickness-2.6mm, fin type-solid-fin od-54mm-heigt-8mm-fin thickness-1.30m m-tue material-sa-210a1-fin material-caron steel, dwg no-25964-121-05 & 25964-106-06, fin tues evaporator-upper part, tue od-38mm-length-21126mm-thickness-2.6mm, fin type-solid-fin od-64mm-heigt-13mm-fin thickness-1.30 mm-tue material-sa-210a1-fin material-caron steel, dwg no-25964-121-05 & 25964-106-06, fin tues super heater-1-lower part, tue od-38mm-length-21126mm-thickness-3.0mm, fin type-solid-fin od-58mm-heigt-10mm-fin thickness- 1.30mm-tue material-sa-213 t 91-fin, fin tues super heater-1-upper part, tue od-38mm-length-21126mm-thickness-2.8mm, fin type-solid-fin od-58mm-heigt-10mm-fin thickness- 1.30mm-tue material-sa-213 t 22-fin material-11%cr steel, dwg no-25964-112-05 & 25964-106-07, tues super heater-2- lower part, tue od-38mm-length-21126mm-thickness-3mm, tue material-sa-213 t 91, dwg 25964-106-07, fin tues super heater-2-upper part, tue od-38mm-length-21126mm-thickness-3mm, fin type-solid-fin od-58mm-heigt-10mm-fin thickness-1. 30mm-tue material-sa-213 t 91-fin material-11%cr steel, dwg no-25964-111-05 & 25964-106-0
supply of rolling shutter motor assemly work@jfzs rief scope of works: - contractor needs to visit site prior to quote - contractor to check roller shutter motor assemly for any defects and shall e rectified. - contractor needs to check the motor and pc for any defects, sh all e repaired or replaced ased on the condition of motor and pc. - motor is in gis room at high level, contractor is responsile for loading and unloading. - contractor needs to ring the system to healthy condition in manual and auto as well. note - warranty for workmanship and materials supplied shall e 1 year from the date of work completion. for site visit, please contact mr. rashid - moi le 052-5507585 mr. suresh - moile 052-6413078
supply of film;pouch;laminating;a3;125 micron;thick
supply of toluene, packing of 2.5 ltr. ottle, 2-propanol 2.5ltrsiso-propyl alcohol
services for 2nos kone elevator installed at k-station whr-51/53: works include routine maintenance, troule shooting & repair/repla ce spare parts for one year. also half yearly load test & 3rd party inspection twice. for technical clarifications party can cont act elow dewa personnel: 1. mr. mohamed sayed mahdi dy sr manager - emd k, moile: 0506585828. 2. mr. ameer asha shaik sr.eng ineer - emd k, moile: 0553876541. quotations to e otained only from oem m/s. kone & their authorized service agents/parties. par ty should visit the site & sumit their quotation in aed only.
expansion joint replacement work at g - station jeel ali power station technical specification and general terms & conditions ti tle: expansion joint replacement at whr # 31 for dd y pass stack # total 1 nos. duration: total 10 days max. expansion joint specifi cation: store code 3600022507 doule expansion joint with control guide. ptfe coated outer elt with insulation olster and joining kit as per drawing# 12250-10 rev a. design temp-600 deg c, pr -700mm/-500mm h20, 5907x6566, 6258x6258mm. mfg -whalco or equivalent. scope of work: method statements to e sumitted prior to start of work. risk analysis for work to e carried out and report to e sumitted p rior to start of work. moilize men and equipment. toolox talk for the work to e conducted and copy to e sumitted priorstart of work . removal of expansion joint flange connection all the removed olt and nuts shall e cleaned and luricated remove faric out layer. re move outer olster ag remove inner olster ag cleaning of expansion joints ellow connection duct. weld the support-holding hook with c asing for inner olster fix the inner olster fix the outer olster fix the faric layer and joining y welding heat sealing all the ol ts nut to e torque tightened. supplier shall ring all the required tools and tackles for the installation dewa will not provide any tools, tackles, and work force. housekeeping of the site and proper waste disposal as per dewa safety rule. work completion report s hall e sumitted with detailed description and phots. work period # total10 days warranty # one year technicalspecification and gene ral terms & conditions the contractor shall visit the site and make himself fully familiar with the work scope, plant access, facili ties, complexities, safety measures etc., efore he sumit his id the contractor shall sumit the schedule of work the period efore com mencement of the work and shall e approved y dewa. dewa anticipates maximum 3 days all dewa safety & environment policy, rules and r egulation shall e followed at work site during the execution of the work. the contractor#s engineer should e familiar with safety regulations while working in a hazardous area. the contractor shall arrange all tools required for the contract. all rigging and tra nsporting equipment should e arranged y the contractor. these rigging toolsshould e duly tested and certified y the third party ins pection agency and the certificates should e produced on demand. contractor#s supervisor shall e availale at site throughout the per iod of work. the work carried out y the contractor shall carry a warranty for one year and the contractor shall attend any defects c ome out of ad workmanship etc. free of charge within this period. the contractor should apply for the permit to work well in advance and this request shall e followed with method statement, risk assessment as attachments hot work permit should apply on daily asis. entry permits for the workers should e applied with passport copies having valid visa. entry permits for the vehicle should e appli ed with copies of police vehicleregistration. all the workers should wear the uniform, safety shoes and helmet while at work. tool ox talks should e given to the workers y their supervisor efore start of work. all material and tools rought in shall e declared at power station security gate and the list of these items shall e signed y dewa security. the copies of these documents shall e lodge d with dewa engineer in-charge on daily asis. this document will e the asis for the clearance gate pass to take them out on compl etion of the jo. dewa scope: 1 lc arrangement. 2 material: expansion joint, nut olts etc. 3 scaffolding where ever required. 4 entry pass for contractor. for site visit contact 1 arad a 0504611635, hausahea@dewa.gov.ae 2 aasaithami 0508847736, aasaithami.raja@dewa.gov.ae