Filters

List of projector Tenders

List of latest projector Tenders in Indian Tenders. Click on any projector Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for projector Tenders.

All-Tenders (9)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34988807 | 19 Aug, 2025

Tender Value : 0

Umiam - Meghalaya

Tender for gem bids for upgradation, unified communications and collaboration system, extended omni-directional tabletop microphones, hdmiover usb converter, accessories and mounting kits forcamera, speaker, mic etc., gooseneck microphones withbase and accessories, central control unit for conferencesystem, digital signal processor, 12x ptz camera forvideo conferencing, 5 inch surface mount speakers, amplifier for speakers, rack mount central processing unit, 17u equipment rack, accessories with microphonecables, speakers cables, xlr connectors, hd 20x ptzcamera with mounting kit, remote controller, power adapter, 4-channel 1080p hdmi video presentation switcher, hdmiover cat6 extender, hdmi to usb 3.0 capture box, cat6cables, rca, mono, xlr, ep, hdmi cables, wireless mouseand keyboard, 6-channel audio mixing console, hdmisplitter, wireless hand held microphone with receiver, wireless lavalier microphone

Trust

TRN :34968508 | 14 Aug, 2025

Tender Value : 0

Maihar - Madhya Pradesh

Tender for light and sound show audio and visual graphics system based multimedia presentation atmandir pranganincludingalha temple campus showing historical, religious, cultural and spiritual knowledge, rituals and importance of maa sharda devi maihar temple a light and sound show audio and visual graphics system

State Government

TRN :34941394 | 08 Aug, 2025

Tender Value : 2.45 Crore

Gandhi Nagar - Gujarat

Tender for gem bids for turnkey, demolition of brick work and stone masonry, dismentalingtiled of stone, dismentling doors, windows, ventilators etc, removing and scraping of old deteriorated plaster of anythickness, dismentaling aluminium gypsum partition, door, window, and fixed glazing and false ceiling, dismantlingsanttary fittings, brick work, providing and fixing g.i.hexagonal chickenmesh, providing 15mm thick cementplaster, glass door with aluminium frame corner, flushdoor with wpc frame, flush door, standared extruded ofalluminium section, applying two coats of putty and twocoats of primer, plastic emultion paint, vitrified flooring, complete carpet system with the manufacturers approvedadhesive, kota stone slab, grid ceiling, plain gypsumboard frmr grade ceiling, armstrong wooden grid ceiling, chair type 01 main chair, chair type 02 chair, accoustic panelling, training room chair, custom madefurniture, ply wall paneling finish with veneerfinish, ply palmet work, frosted sparkling glass film, cement sheet, low height storage, full height storage, urinal partition, plumbing fixture, screw down bib taps, white glazed vitreous china wall mounting type europeantype water closet, washbasin with single hole for pillar tap, c.p. brass waste for washbasin or sink. a 32mmdia., providing and fixing urinal, chromium plated, bottle trap, chromium plated brass half trun flush cock, kitchen sink, rubber plug for sink or wash basin., m.i. fisher union forwashbasin, c.p. brass towel rail comlete, toilet paperholder, pillar tap, bevelled edge mirrror, signages, wallmounted customised ss fonts signages, art work, rollerblind, digital clock, stainless steel dustbin, squarepedal bin 10x15 stainless steel dustbin, s.s finish pot, artificial plant, electrical work, secondary light points, one light point, bell point, 6a socket with one 6a switch, /bid number: gem/2025/b/6490197* /dated: 24-07-2025 & & / bid document1 / 83 & & /item category16a socket with one 16a switch, one fan point, 20a - 6 pinswitch 20 amp indicator switch socket for ac, flexiblecopper frls cable, providing and erecting switch board, supply and laying of pvc medium duty conduits, t.v.socket with back box, harware etc., telephone socket withback box, harware etc., rj 45 data point socket with backbox, harware etc., cat-6 t with cable with requrie harwareand accessories etc., tv rg-6 cable with requrie harwareand accessories etc., 4 way splitter with wall mountboxes, harware etc., rg-11 cable to be laid with pvc condiut, pull boxes, harware etc., 3phase and 1 phasedistribtuion box, medium voltage cable endtermination, 4c x 6 sq. mm al xlpe armoured cable, 4c x 10 sq. mm al xlpe armoured cable, 3.5 c x 120sq. mm al xlpe armoured cable, cable endtermination and connection, 4c x 10 sq. mm al-cuxlpe armoured cable, light fixtures fans, highspeed 50 watt ceiling fan with double, exhaust fan, removing all electrical material, cctv camera, domecamera, nvr, hard disk, network switch, network rack, 65 uhd led display for cctv, conduits and pipes, 8modem jack for computer open rj-45 cat-iii, lan cable, network switch, fire alarm system, fault isolator, photothermal detector, thermal detector, fire survivalarmoured cable, fire alarm panel, av is to controller, chairman unit microphone with flexible stem, delegate unitmicrophone wit flexible stem, multicore conference cable, ceiling or wall mount speaker, power amplifier, digitalsignal processor, speaker cable, presentation point -popup box, main led display size, usb camera for soft vc, multi format presentation switcher, multiformat activetable plate transmitter, hdmi receiver, lan switch, hdmi- hdmi cable, 4-pair cat5e shielded twisted pair stp cable, usb, usb hub, equipment rack, cassette type split air-, split ac machine, ms angle

Central Government/Public Sector

TRN :34917408 | 02 Aug, 2025

Tender Value : 19.00 Lacs

Tinsukia - Assam

Tender for gem bids for upgradation, composite fire extinguisher, fire blanket, storedpressured mist extinguisher, pressure monitoring systemon portal fire extinguisher, combo unit fire fighting, mobile fire training unit, fire extinguisher training unit, blaze cut auto fire suppression system, video projectionsystem, led screen for display of trg movies, auto firealarm suspension system

State Government

TRN :34899847 | 12 Aug, 2025

Tender Value : 0

Neemuch - Madhya Pradesh

Tender for gem bids for video conferencing camera / web camera v2 q2, television tv v2 q2, all in one pc v2 q2, onlineups v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, oem annualturnover, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6461391; /dated: 22-07-2025 & & / bid document1 / 22 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryvideo conferencing camera / web camera v2 r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount25000 /epbg detail b /requirednoa. . z % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , \ u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : collector and sacretory district e-governance societycollector neemuch, general administration department madhya pradesh, n/a, collector neemuch /splitting2 / 22 ; / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. video conferencing camera / web camera v2 3 pieces bis requiredyes t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescription/applicationintended applicationa video conferencing camera are digital cameraspecially designed for use in video conferencingapplication.genric descriptionvideo conferencing cameragenricptz functionyes e-ptz only, yes high precision motorized-ptzor higherresolution maximum eachcamera4k hd 3840 x 2160 pixel or higherpan range minimum0pan range maximum0tilt range minimum0tilt range maximum0zoom range opticalmaximum2x, 3x, 4x, 5x, 10x, 12x, 16x, 20x, 22x, 30x, na orhigherzoom range digital maximummore than 3x - 6x, more than 6x - 9x, more than 9x -12x, 12x - 16x or higherfield of view degreemore than 105-1203 / 22 maximum frame ratesframesper second supported30, 50, 60 or highernumber of mics2control / image processing /focusing featuresnaconnectivityconnectivity outputusb uvc, uacfeature/accessoriessalient featurescmos sensoroptional features/accessoriesnaoperatingconditionsminimum operatingtemperature degree c-10, -5, 0 or lowermaximum operatingtemperature degree c40, 45, 50, 60, 70 or higherrelative humidity noncondensing at 40 deg c %rh80 or loweringress protectionip21, ip20, na or higherwarranty / servicecomprehensive on sitewarranty year5 or highertime duration for repairing/replace the defect duringwarrantywithin two weeksupply of compatible driversand software includedyesbuyer specificrequirementsonline meeting platformsupported application, softwaremicrosoft teams, zoom, cisco webex, google meetcertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited.agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - video conferencing camera / web camera v2 3 pieces specification parameternamebid requirement allowed values4 / 22 package 2 supported audio&video, 3 supported operatingsystem 4 camera1 it should be all-in-one video bar with integrated microphones, speakers, 4k camera with privacy shutter, 2 it should support audio andvideo over the usb, 3 it should support latest windows os and macos 4 integrated uhd 4k 2160 p or higher capture resolution, 90 - 120-degreefov or better, 5x digital zoom or better, group framing, automaticspeaker tracking preferable to have additional ai based features5microphone, 6 speaker5 inbuilt beam array 4-6 or more microphones to capture sound. it shouldsupport full-duplex conversations, acoustic echo cancellation andbackground noise suppression. microphone pickup range should be 15 ft ormore, 100 hz - 15 khz frequency response or better bidder needs to supplywired one external expansion microphone from same oem with accessories.6 inbuilt stereo speakers, output shall be 90 db or better7 other interfaces 8 audiofeatures7 min. 1 x usb 3.0 type c, audio-in/line-in port wi-fi wireless networking formanageability and to connect with byom wireless dongle optional. 8 itshould be possible to pair a mobile phone over bluetooth & use all in onevideo bar as the speaker and microphone for the mobile phone. built-inbluetooth 4.2 or better9 video features 10 cable 11drivers9 when two or more people in the same room talk back and forth, systemshall treat them as if they are in a conversation. if the two speakers arentclose, the usb video bar displays a split screen showing the two peakersoptional. 10 minimum 5 m cable to be supplied to connect the aio withthe usb video bar from same oem 11 smart-camera experiences are builtin - no drivers or software needed plug and play support12 cloud platform certification, 13warranty, 14all requiredspecification12 device should be certified with zoom rooms, microsoft teams, googlemeet etc. cloud platform. bidder compliance certificate for at least twocloud-based platform should be provided. 13 the complete solution shouldbe from the same oem with a 5-year warranty from day one. the productshould bis/ul, ce, fcc, rohs certified. 14 all required specification as perscope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345television tv v2 3 set bis requiredyes t t /technical specifications* t / as per gem category speci cation5 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescriptiona television set or television receiver morecommonly known as tv is an electronic device forthe purpose of receiving of broadcast of video &audio content as per applicable tv broadcast systemlike ntsc/ pal etc. it enable the user to viewing andhearing programs and news etc as broadcasted /television broadcasts and may have additionalcapabilites to view other infomative programs overinternet.intended applicationto receive and play tv broadcast programs. it isdifferent from monitor which is used as output devicein it systems.type/category/class of tvsetsmart tv2display type/technologyled light emitting diode, oled organic light-emitting diode, qled quantum dot led or highernominal screen size rangeinchesmore than 38 inch - upto 46 inchaudio power minimum10w x 2, 12w x 2, 20w x 2 or higherperformance &featuresmaximum resolutionpixels supported4k ultra hd uhd: 3840x2160, 8k ultra hd:7680x4320 or higherstatic contrast ratio1200 : 1, 1300 : 1, 1400 : 1, 1500 : 1, 1600 : 1, 1700 :1, 1800 : 1, 1900 : 1, 2000 : 1, 2500 : 1, 3000 : 1, 3500 : 1, 4000 : 1, 4500 : 1, 5000 : 1 or highertypical brightness nits300 - 399, 400 - 499, 500 -699, 700-999 or highersalient featureinbuilt speakers, table mountlegs, wall mountbracketoptional featurebuilt-in set-top box, hdr high dynamic range, screen mirroring, built-in wi-fi, wi-fi direct, bluetooth, lanpowerinput power rated voltage230 +-10%, 50hzbee star rating1 star, 2 star, 3 star, 4 star, 5 star or higherrf input &connectivity portsinput portrf input, 1-hdmi port, 1-usb port, 1-vga port, 1-ethernet portaccessoriesaccessories included in thescope of supplyremote control, wall mounting bracket, standoptional accessoriesconnecting cables hdmi, nawarranty, installationcommissioningcomprehensive standardwarrantyyears1 or higherwarranty on display onlyyears3 or highercertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited6 / 22 agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - television tv v2 3 set specification parameternamebid requirement allowed values1 display size, 2 viewingangle, 3 response time, 4input ports, 5output ports1 43 inches or above, 2 178178, 3 9 ms or better, 4 hdmi-3, usb 2.0-1, rj45-1, 5 digital audio out, headphone out6 special features, 7accessories6 smart share/screen share, snmp support to take control of display, wake on lan, built in quad core media player, 7 table stand/wall mount, remote and standard cables8 power supply, 9 powertype, 10 power consumption, 11 certificates8power supply, 9built-in power, 10 120w or less, 11 bis, ul, iso 9001, iso 14001, iso 45001:201812 warranty, 13 operatingsystem, 14 service12 5 years on site, 13 web os/android/taizen with latest os release, 14oem should have registered direct service center in mp to manageservice at district level with toll free number & manufacturing setup in india.15 hdmi cable/ other, 16 allrequired specification15 additional hdmi /other cable to conenct above with aio lengthminimum 10 mtr capable to transfer audio and video both, 16 all requiredspecification as per scope of work bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345all in one pc v2 3 pieces bis requiredyes t t /technical specifications* t / as per gem category speci cation7 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warrantyprocessor numberintel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900 orhigherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or highertype of keyboardstandard, bilingual or highergraphicsgraphics typeintegratedoperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8panel technologyin plane switching ips or higherportsnumber of ports1-hdmi, 1-dp, universal audio jack, 1- rj-4510/100/1000 ethernet port, 1-usb 3.1 gen 2 type a, 2-usb 3.1 gen 2 type a, 2-usb 3.1 gen 1 type a, 1-usb 3.1 gen 1 type cgenericstandheight adjustableadditional specification parameters - all in one pc v2 3 pieces specification parameternamebid requirement allowed valuesdisplay resolution, displaysizedisplay resolution - min. 1920 x 1080, display size - 23 inch or higherspeaker, connectivityspeaker - dual 2 w speakers or more, connectivity - bluetooth, wi-fi andethernet8 / 22 number of usb 2.0 ports, mouse and keyboardusb 2.0 ports - min. 03, mouse and keyboard - wirelessanti-virus, oem warrantyanti-virus - required with 05-year license, oem warranty - 5 years on siteadditional feature, all requiredspecificationadditional feature - provision to connect hdmi smart tv for audio/video, allrequired specification as per scope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345online ups v2 3 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0 kvaswitching technologyigbt-pwminput voltageac single phase 160v - 260v 50hzoutput voltageac single phase 230v +/-1% 50 hzwarranty for ups years3, 4, 5 or higherbattery/backupbankbattery/backup bankprovided with online ups hint: in case the ups issupplied with battery, seller shall ensurecompliance to the gstrates as perrecommendations made inthe 45th meeting of gstcouncil dated 17th sep2021 with batterytype of battery hint: na incase battery not providedsmf-vrla conforming to jisc:8702pt.i, ii&iii, stationary lead acid batteries with tubular positiveplates in monobloc container conforming tois:13369:1992 latest9 / 22 backup time minuteshint: na in case batterynot provided30 minutesminimum guaranteed vah1600 x per kva x per hour of backup timewarranty for batteryyears by batterymanufucaturer/brand hint:na in case battery notprovided3 or higheraccessories with batterynainstallation andcommissioning orserviceinstallation and commissioning covered in the scope ofsupplyprovidedafter sales service turnaround timewithin 48 hours, within 7 dayspreventive maintenance hint:mention timeline if provided, na if not providedmonthly, bi-monthly, quarterly, half yearly, yearly, naor higherother services providedpan india service support on 24 x 7 basisperformance /functionalinbuilt isolation transformerwithoutoverall efficiency %>/ 80% & <90% with inbuilt isolation transformeroverload limit20% overload for minimum 10 minute, 20% overloadfor minimum 5 minute, 50% overload for minimum 1minute, 50% overload for minimum 3 secondstotal harmonic distortionthd%2% maximum @ 100% linear loadother functional featurescrest factor on full non-linear load is not less than 3:1accessoriesaccessoriescabling 6 meters input upto 3m and output upto3m, rack for batteriessalient featuresprotectionprotection for under voltage at battery terminal, protection of over voltagemeteringinput voltage, output voltage, input current, outputcurrentalarms and indicationsindicator for mains presence, indicator for batterycharging and dischargingadditional featurespure sinewave ac outputdesign /constructiontype of design /constructionfloor standingenclosure mm1.2 mm minimum thickness of m.s. sheet duly powdercoateddegree of protectionip21, ip20 or higherother constructional featuresbattery on/off mcb, mains on/off mcb /speci cation t t /specificationname b b r r /bid requirementallowed values10 / 22 operatingconditionsminimum operatingtemperature0, -5 or lower degree celsiusmaximum operatingtemperature40, 45, 50 or higher degree celsiusrelative humidity noncondensing at 40 deg c90, 95 or higher percentbuyer specificrequirementenvironmental test reportrequirementsnabattery test reportnaintended applicationsnetwork it equipmentother requirementsrohs compliancereports andcertificationagree to provide all relevantdocuments testreports/supporting document/reports etc to the buyer at thetime of bidding or on demandyesas per meity government ofindia guidelines ups shall havevalid bis crs certifications asapplicableyes for ups rating upto 10kva /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - online ups v2 3 pieces specification parameternamebid requirement allowed values1 power output wattage, 2ups type, 3 outputwaveform1 min. 700w, 2 online, 3 pure sine wave ac output, manual bypassfacility4battery voltage, 5 batterycapacity, efficiency4 12v/24v dc, 7ah - 18ah, 5 more than or equal to 85%6overload protection 7 allrequired specification6yes, with auto shutdown 7 all required specification as per scope of work* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays11 / 22 vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac3455. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydaysbuyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1specificationdocumentviewspecification documentall in one pc v23the uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:1 effective from 22-11-2024 for category video conferencingcamera / web camera v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from bureau of indian standards as per scheme-ii of schedule-ii ofbureau of indian standardsconformity assessment regulations, 2018.buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfilment process.note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:2 effective from 16-10-2024 for category television tv v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from the bureau of indian standards as per scheme-ii of schedule-iiof bureau of indian standardsconformity assessment regulations, 2018.12 / 22 buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfillment process.buyer shall validate and confirm the comprehensive warranty terms and conditions during theprocurement process. note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:3 effective from 26-03-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.13 / 22 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft and holding a microsoft authorizationform maf from the software provider.b. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that maf shall not be made a mandatoryrequirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system14 / 22 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.15 / 22 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.16 / 22 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:1 effective from 06-07-2022 for category online ups v21. in addition to general terms and conditions of gem, the following special t&c shall be applicable foronline ups version 2.0 with reference to installation and commissioning.sellers responsibility: installation and commissioning shall involve all the interconnections, any cablingbetween power source, switch boards within 3 metre range for input power and connecting output power17 / 22 in the scope of seller. buyers responsibility: buyer will ensure well ventilated/covered site/room having requisite powerpoints/distribution board to provide input power to ups as well as to take out power from ups within 3metre of the location of ups placement.the above is not applicable for the stores supplied without installation and commisioning.note: the above is indicative and any incidental requirement related to above responsibilities shall alsobe considered in the responsibilities of buyer/seller as applicable.5 5 : : a a/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.3. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods4. turnoverbidder turn over criteria: the minimum average annual financial turnover of the bidder during the lastthree years, ending on 31st march of the previous financial year, should be as indicated in the biddocument. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for therelevant period shall be uploaded with the bid. in case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.5. turnoveroem turn over criteria: the minimum average annual financial turnover of the oem of the offered productduring the last three years, ending on 31st march of the previous financial year, should be as indicated inthe bid document. documentary evidence in the form of certified audited balance sheets of relevantperiods or a certificate from the chartered accountant / cost accountant indicating the turnover details forthe relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of theoem is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria. in case of bunch bids, the oem ofcategory related to primary product having highest bid value should meet this criterion.6. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.18 / 22 . certificatesiso 9001: the bidder or the oem of the offered products must have iso 9001 certification.8. service & supportavailability of service centres: bidder/oem must have a functional service centre in the state of eachconsignees location in case of carry-in warranty. not applicable in case of goods having on-sitewarranty. if service center is not already there at the time of bidding, successful bidder / oem shall haveto establish one within 30 days of award of contract. payment shall be released only after submission ofdocumentary evidence of having functional service centre.9. service & supportdedicated /toll free telephone no. for service support : bidder/oem must have dedicated/toll freetelephone no. for service support.10. service & supportescalation matrix for service support : bidder/oem must provide escalation matrix of telephone numbersfor service support.11. buyer added bid specific atcbuyer added text based atc clauses1. it must be noted that normally all correspondence and transactions will be made only with the parties w hose bid have been accepted and not with anybody else. consortium not allowed in any form.2. bidder has to submit technical compliance on oem letter head.3. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing should have at least five technical support personnel stationed directly in madhya pradesh to ensure prom pt technical assistance. official hr documentation is mandatory.4. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing must establish a direct/authorized service center in madhya pradesh to offer immediate support. valid do cumentation for service center must be provided on the oem letterhead.5. the manufacturer for the all in one 4k usb video bar and cloud based platform for video conferencing must have

Central Government/Public Sector

TRN :34891878 | 11 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for entry and mid level desktop computer q2, computermonitor q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno -- 8 8 9 9 : : ; ; / minimum number ofbids required to disable automatic bidextension3 > > ; ;, , @ @ -- / / number of days for which bidwould be auto--extended7 b %b % : : /bid to ra enabledyesb %b % c c /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 f f /primary product categoryentry and mid level desktop computer g g & i & i /time allowed for technicalclarifications during technical evaluation2 days ; /bid number: gem/2025/b/6459939 /dated: 21-07-2025 & & / bid document1 / 14 q q 8 8 s s q q 4 4 / % % u > u > v v /inspection required byempanelled inspection authority / agenciespre-registered with gemno g g s s /evaluation methoditem wise evaluation/ w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail 8 /requiredno /epbg detail 8 /requiredno /splitting / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is2 / 14 validated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1 g g g g / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: g / evaluation schedules & / / item/category / quantityschedule 1entry and mid level desktop computer8schedule 2computer monitor15entry and mid level desktop computer 8 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or highermotherboardexpansion slots pcie x 12 or higherexpansion slots m dot 2 forwifi1 or highergraphicsgraphics typeintegratedoperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higher3 / 14 storagetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb500, 512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highercabinetbays for optical drive1optical drivedvd r/waudio interface typeuniversal 3.5 mm audio jack support for audio-in andaudio out, audio-in, audio-outportsnumber of usb type a portversion 2 point 04 or highernumber of usb type a portversion 3 point 2 gen 13, 4, 5, 6 or highernumber of usb ports type c1, 2 or highernumber of vga ports1 or highernumber of hdmi ports1 or highernumber of dp ports1 or highermonitoravailibility of monitoryes as per is 13252 part 1display technologyled backlit lcd liquid crystal displayscreen size in cms53.1 - 58 20.91 - 22.83, 58.1 - 63 22.87 - 24.8maximum resolution pixels1920 x 1080 full hdmonitor porthdmi, vgaintegrated webcam with micyes, noinput devicesmouse connectivityusb wired, wireless or higherkeyboard connectivityusb wired, wireless or highertype of keyboardstandardwarrantyon site oem warranty inyear3, 4, 5 or higher /speci cation i i /specificationname 8 8 g g /bid requirementallowed values //b y b y /consignees/reporting officer and quantity4 / 14 :. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant830computer monitor 15 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesstandardsdescription of storea monitor is an electronic visual display device thatoutputs the video signal generated by a computer. itis essentially a screen that shows text, images, andvideos, allowing users to interact with the computersgraphical user interface gui. it comes with a tablemount for support, a power cable and/or adapter, ports for connectivity and 1 year minimum on sitewarrantyconstructionpanel typein plane switching ips or higherdisplay technologyled backlit lcd liquid crystal displayscreen form factorflatdimensionmaximum resolutionpixels1366 x 768 hd, 1440 x 900, 1920 x 1080 full hdscreen size in cm48.1 - 53 18.94 - 20.87, 53.1 - 58 20.91 - 22.83brightness in nits301 to 350, 350 to 500 or higherconnectivity portsinput port1- hdmi port, 1- vga port //b y b y /consignees/reporting officer and quantity:. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant1530special terms and conditions-version:5 effective from 06-06-2025 for category entry and mid leveldesktop computer5 / 14 . for buyers:the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop systems should be adevice partner of microsoft and holding a microsoft authorization form maffrom the software provider.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that maf shall not be made a mandatory requirement inbids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.6 / 14 processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20245scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.7 / 14 check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.10hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecentre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems8 / 14 scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, a usbtype-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:2 effective from 31-01-2025 for category computer monitor1. the product in gem marketplace direct purchase & l1 purchase comes with a minimum standard on sitewarranty of one year. in case the seller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.: : v v \ \/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of desktop based programming hmi unit and monitor.please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4. inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.9 / 14 .for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10.not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 11.terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category desktop based programming hmi unit and monitor, has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.or10 / 14 notarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category desktop based programming hmi unit and monitor16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem: this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance. bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same/

Central Government/Public Sector

TRN :34895516 | 11 Aug, 2025

Tender Value : 50.00 Lacs

New Delhi - Delhi

Tender for gem bids for hdmi switcher , ptz camera , tracking camera , hd recorder , mount for camera , hdmi and audio to usb scaling bridge , 6ft hdmi patch cable , hdmi txrx set , twisted pair extender for usb peripherals , usb patch cable , wireless presentation system , power supply , access point , undermount , dsp , ip to rs-232 converter for control system , network switch , stereo audio control cable , mic cable , cabling and termination charges , shielded cat6 cable , equipment rack with 600mm width 600 mm depth and 12u height , installation and commissioning , compact column array speaker , 2 channel class-d amplifier , control processing system

Central Government/Public Sector

TRN :34846176 | 31 Jul, 2025

Tender Value : 0

Sriganganagar - Rajasthan

Tender for gem bids for video conferencing camera / web camera v2, speakerphone, hdmi 8 x 8 switcher, multifunction device, video projection system, professional presenter, cat 6utp cable, hdmi cable 10 meter, hdmi cable 20 meter, visualizer, desktop computer, online ups, colour printer, usb booster extension cable, hdmi splitter

Central Government/Public Sector

TRN :34768577 | 02 Aug, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for logic controller interface pcb by sdd approved, gearsensor gear sensor pcb specification inputs active lo 8 nos outputs 8 nos through 15 pin d connectors, power cable 2 core power cable type yy 1 sq mm diastrength 8 1 kg, 3 core power cable h07 rnf 1 5 sqmmdia isi standard, 3 core power cable h07 rnf 2 5 sq mmdia isi standard, signal cable 10 core cableunshielded type yy 6 3mm dia strength 8 1 kg , 15 corecable gear sensor pcb to interface pcb with 15 pin maleand female d sub end connectors 1m length , 25 corecable unshielded screened 6 3mm dia, connector 2 pinconnector 2 pin wego connector plug male and femalesockets pair 0 138inch 3 5 mm pitch 180degree, 3 pinconnector 3 pin wego connector plug male and femalesockets pair 0 138inch 3 5 mm pitch 180 degree 10amps, connector 4 pin connector 4 pin wego connectorplug male and female sockets pair 0 138inch 3 5 mmpitch 180degree, 10 pin connector 10 pin wego connectorplug male and female sockets pair 0 138inch 5 mm pitch 180 degree 16 amps, 16 pin connector 16 pin wegoconnector plug male and female sockets pair 0 138inch 5mm pitch 180 degree 16 amps, 15 pin automobileconnector panel receptable 15 way , 9 pin d shell femaleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 9 pin d sub maleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 15 pin d shell femaleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 25 pin d shell connectorfemale complete with dust cover and strain relief ittd sheel connector isi standard , connector 25 pin dshell connector male complete with dust cover and strainrelief itt d sheel connector isi standard, audiocable audio cable 10 m length flexible audio cablenominal o by d 1503a 3 68mm nominal capacitancebetween, ac plug top 6 amps 3 pin plug top 6 amps isistandard , ac plug top 15amps 3 pin plug top 15amps isi standard , binding wire size 2061 02 1 by 26 92 mtrs roll , power cord computer power cord 230 vac 6 a 3 mtr length h07 rnf 1 5 sq mm dia isistandard , connector combination switch als automobileend connectors automobile end connector for alscombination switch, ignition switch als automobile endconnectors auto connector for als ignition switch bothmale and female pair , lan cable lan cable cat 5e withrj 45 end connectors 15 m length duplex cable cat 5eutp cat 5e utp , lan cable cat 5e with rj 45 endconnectors 2 m length duplex cable cat 5e utp cat 5eutp nominal od, switch microswitch push button type 3way 10 mm dia , lt wire premium quality lt wire fordashboard wiring 2mm dia lt wire of red black blue green and yellow , proximity switch proximity switchp type inductive p type 3core wire length 2 5 mtrs 18mm dia 6 36 volt, spike buster spike buster socket board6 sockets 15 a 6 sockets 15 a 15 by 5a multipinsocket card length 5 mtrs, spike buster socket board 6sockets 6 a 6 sockets 6 a card length 5 mtrs socketmaterial bross heavy duty , usb extender cable usbextender cable 10 mts usb extender cable usb 2 0 male to female supports 480 mbps , vga cable vga cablewith 15 pin male to female end connectors 20 m length high performs rgb db15 de15 hd 15, hdmi cable hdmi cable 2m length supporting resolution 800x600 1024x768 1080p full hd 1092x1200 wxga , //bid details2 / 100 hdmi cable 20m length supporting resolution 800x600 1024x768 1080p full hd 1092x1200 wxga , cable ties cable ties and tie bases 50mm packet of 100 as per drawing standard cabel ties white nylon with, cable ties and tie bases 100mm packet of 100 as perdrawing standard cabel ties white nylon with anon release, cable zip cable zip tie mounts cable zip tiemounts self adhesive tie mount for wire alignment size1inch x 1inch color black, spiral pipe spiral pipe 1 5inchdia flexible conduct mtrls nylon pa6 thread pg36 temp 40 deg to 120 deg , spiral pipe 1inch dia flexibleconduct mtrls nylon pa6 thread pg36 temp 40 degto 120 deg , pvc channal pvc channal pvc flexibleconduct 1 x 3 1 5 mtr length, instrument panel alsmk iv original instrument panel complete teflonwiring modified als mk iv, instrument panelbulbs instrument panel bulbs operating voltage2 amps 12v dc , switch toggle switches toggle switch 3way 230 volt ac, sleeves sleevesassorted 1 0mm 1 5mm 2mm 4mm 5mm 8mm 10mm 15mm 20mm , heat sink sleeve 1mm 1 5mm 2mm 4 mm and 8 mm each 02 mtrs, connector ecom connector for ups connection 6amps ecom connector 5 amps male and female pair , ecom connector for ups connection 15 amps ecomconnector 15 amps male and female pair , universaladaptor universal adaptor for 3 pin plug 6 apms socketmaterial bross isi standard , mounting bracket mountingbracket for speaker as per 515 abw drawing no a4 515als 57817 , mounting plate for plc as per 515 abwdrawing no a3 515 als 57822 , mounting bracket for spikebuster as per 515 abw drawing no a4 515 als 57823, mounting bracket main gear box als as per 515 abwdrawing no a3 515 als 40805 , holding bracket for 7inchlcd monitor as per 515 abw drawing no a3 515 als57826 , mounting bracket for smps as per 515 abwdrawing no a4 515 als 57817 , steering logitech g 29mounting assembly steering logitech mounting assy asper 515 abw drawing no a2 515, coupling aluminiumflanze coupling stearing wheel with logitech g 29 15 cmdia 6 cm length solid aluminium, gear box modified maingear box of als 6 1 gear 6 1 gear with shiftingmechanism shifting lever and lever knob , projectorstand mounting stand video projector projector mountingstand rotating height adjustable extension locking, projection screen back projection screen projectionscreen projection from backside of the screen, screenframe parabolic projection adjustable frame parabolicprojection adjustable stand with 11 5feetx15feetx4feet, mounting rope projector screen mounting rope projectorscreen mounting rope nylon rope 8mm dia as per isostandard , instructor station instructor station als 1 2 mswith black powder coating 4xinstrument cooling fans , chair instructor chair isi standard , universal joint universal joint als mk iv assy with coupling male andfemale for steering assy as per 515 abw drawing no a3515 als 57824 , fasteners set of assorted fastenersals cheese head slotted screw size m6 by 40 long with nutand double washer, mfg lable manufacturer s lableplate 515 army base wksp manufacturer plate as per 515abw drawing no a3 515, u bolt u bolt with couplingbracket u bolt for coupling als mk iv cabin intermediteframe with 6 dof hydrolic upper, anchor bolt anchorbolt size 20 mm dia x 12inch as per 515 abw drawing , //bid details3 / 100 frame intermediate frame intermediate frame couplethe als mk iv driver cabin to 6 dof hydrolic motionplotform, dvr cabin original dvr cabin ashok leylandstallion mk iv ashok leyland stallion mk iv cabinoriginal, hydraulic platform 6 degree of freedomhydraulic motion platform with hydraulic power panel andhydraulic plc panel 1 , hydraulic fluid hydraulicoil hydraulic fluid grade sho 68, power cable 3 phase 4core power cable 3phase with earthing red yellow greenand black 70 sq mm 170 amps, allen key allen key set of8 allen key 2 3 4 5 6 7 8 9 set of 8 isi standard, screw driver set screw driver set of five isi brand, cuttingplier cutting plier 6inch isi standard , spanneropen jaw spanner open jaw set of 8 spanner open jaw10 by 11 to 20 by 21 isi standard 6 to 22 set , spanner adjustable spanner 24inch isi standard , bubblesheet 2 mtr width , corrugated sheet 2 mtr width , cotton waste cotton waste , grease commercial grade , hessian cloth 2mtr width , insulation tape wondertape 10 mtr roll pvc , packing tape adhesive packingtape 50mm width 10 mtrs std roll, paint paint black andoliver green spray container 500 gms quick dryinglacquer spray 100percentage acrylic automobiles finishes, ldpe plastic rolls ldpe plastic rolls pattern plain ldpeplastic rolls pattern plain transparency 50percentage packing type, silica gel transparent silicagel transparent silica gel bag particle size 200 425mesh industrial use isi standard , wood packingboxes chir wood packing boxes by crates wooden boxesrequired for packing one set of, rubber mat rubber mat for6 dof hydrolic base frame 6 x 6 15mm thickness isistandard , documents technical manual as per 515 softcopy approx 250 pages , user hand book as per 515 softcopy approx 250 pages , log book as per 515 soft copy approx 50 pages cgi and iis pc with following configuration.equivalent orhigher. motherboard asus/intel motherboard withfollowing config: - intel core i7 9700k @3.60ghz. processorsupported. -two pci express -three pci slots -support forddr4 lga 1151 / 1333 /1066 mhz dimms support.-1066/800/533 mhz system bus for up to 16 gb of systemmemory, 8channel. up to 6 usb 2.0 port. with two portscompatible with esata dongles, one serial port header, com port for rs-232.communication. equivalent orhigher., processor intel core i7 9700k @3.60ghzsocket:1151lga tech:14nm cache: l1 data: 8x32bytes l1inst 8x32bytes l2 8x256kbytes l3 12mbytes core:8thread:8 or equivalent or higher., ram dual-channelddr4 1866o.c/1333/1066 mhz 8gb, hdd 2.5 hdd driveinterface sata 6gb/s, cache 8mb, capacity 1tb, area densityavg 329gb/in2, guaranteed sectors 488, 397, 168, readspeed 560 mb p/s write speed 530 mb p/s., ssd 256 gb orequivalent or higher, dvd drive. dvd drive internal satadrive type dvdrw, drive height 42mm, interface serial-ata, drive mounting horizontal/vertical, buffer memory 2mbautomatic ball balancing system : a.b.s dvd-r write22x, read 16x. compartable to windows 7., smps smps750watt connectror type atx 12v, v2-52 equivalent orhigher., keyboard with mouse wireless combo wirelesskeyboard with mouse bluetooth support mk-235. 104 keys, adjustable tilt legs, width -15cms, , advanced 2.4ghz, operating distance 10 mtrs, with 2xaaabatterys.equivalent or higher., monitor 24 leddisplay.aspect ratio - 16:9.response time - 5ms, resolution - 1920 x 1080@60hz support full hd 60 hz, fhd1080p.equivalent or higher., cabinet computers chassis. //bid details4 / 100 industrial type industrial type, 19 4u rack computerschassis. ipc -611 bp bare chassis., sound system 5:1channel sound system speaker 5 :1. approx - speakerpower: 25w rms per channel 4channel. sub woofer power17w rms. frequency response: 40 hz ~ 20 khz, s/n ration: 80db, distortion :1 %, satelite speaker:lxwxh7cmx8cmx18.3cm. sub woofer:19cmx19cmx19cm. wiredremote control :2cmx6cmx3cm. power 12v ac 2.9ampadopter.volume control with on/off switch.audio cable fromcomputer to sub woofer.equivalent or higher., ups ups 5kva on line output power capacity 5000 va max outputvoltage 230v. efficiency at full load 92%. distortion lessthan 3% output frequency 50/60 hz +/- 3 hz. crest factor 3: 1 waveform type sine wave output connections 8 iec320 c13 2 iec 320 c19 6 iec auto sensing inputvoltage range for main 160 - 280v powerchute personaledition v2.0 with power card. with 3 pin indian sockets min30 min backup.equivalent or higher, isi standard., ethernetswitch hub 8-port ethernet switch hub 8 port 100mbpsswitch with: a 8 100mbps nway auto ports b ieee 802.3and ieee 802.3u standards supported auto 100dual-speedport upto 200mbps isi standard., kvm switch kvm switch1:4 4 port usb kvm switch 1:4 .one usb consolecontrols 4 computers. computer & monitor selectionindependently via front panel pushbuttons and hotkeys.support superior video quality up to 1920x1440, ddc28.key bd and mouse cablesmoulded separately 3 mtrs eachwith adapter, hdmi splitter 4 port 1 x 4 hdmi splitter 4ksupport connector type - hdmi cable type - hdmi numberof ports-04 350 mhz bandwith, printer. laser printer. printerblack, print speed up to 14 ppm, normal, a4 speedspecification per industry standard testing methods.memory, 2 mb embedded in sip package, 16k bit nv-ram, processor speed 266 mhz, print quality black best, up to600 x 600 dpi 1200 dpi effective output; print technology, laser duty cycle monthly, a4, up to 5000 pages. isistandard., dvd blank. dvd blank with jewelcase. recordable dvd 4.7 gb, 120 minuts with jewel case, pci serial card pci card 2xserial port supports pci irqsharing-saves valuable resources for other expansion card.easy plug & play installation automatically selects irq & i/oaddress. supports 32/64-bit pci bus, pci specification 2.1built- in 16c550 compatible uart with 16 byte transmit-receive fifo, driving force racing wheel force feedback &game wheel logitech g29 driving force racing wheel withshifter module, gas, brake, and clutch pedals, powersupply, software cd-rom, floor padals. ps5, ps4, ps3/pc., converters. dp to hdmi converter supports videoresolutions up to 3840x2160 4k support anduncompressed digital 7.1, 5.1 or 2 audio channels. 5 mtslength, converters hdmi to vga converter pc hdmi & dpconverter with i/p vga to o/p svga, vga, tv & videoconverter, display graphics accelerator card.. high endgraphics card with 4gb gddr5x ram with min 2 hdmioutputs, chipset n-vidia 800mhz engine clock.output, 1250mhz memory clock 5.0 gbps gddr5; 160gb/s memory bandwidth maximum; 88 texture units;high speed 256-bit gddr5 memory interface; pci express3.1 x16 bus interface; full directx 11 support; shadermodel 5.0; compression; opengl 4.1 support; upto 24xmulti-sample and super-sample anti-aliasing ; adaptive, morphological & 3d display/glasses support; stereoscopic3d gaming; 3rd party stereoscopic 3d middleware swsupport; dual/triple/quad-gpu scaling; software support for //bid details5 / 100 windows 10, video projector. lcd projector wuxga type1920x1200, 5500 ansi lumens, short throw lens withgeometry correction, contrast ratio : 10000:1., lcdmonitor screen size 7 diagonal lcd monitor screen size 7diagonal, physical resolution 800 x 480, supportedresolution 640 x 480 to 1600 x 1200, pixel pitch 0.1905 x0.1905 mm, supported refresh rate 60 - 75 hz, operatingvoltage 12 v dc, anti-glare coating, on screen displaycontrol, xenarc 700 series, operating system. microsoftwindows-10 windows 10 professional oem pack, application software. ms office. ms office 2019. consistsms access., programmable logic controller. plc for alsprogrammable logic controller interface pcb / sddapproved - communicates between the cgi computer andexternal real time devices through the serial port, specification : 8 bit micro controller cy8c 366 with01xmaster card and 02xslave card. operating voltage :12dc, digital inputs : 80, in 4x25 pin d-shall connector.digital outputs: 20, in 1x25 pin d-shell connector. analoginputs: 08, in 2x 15 pin d-shell analog outputs:04, ports:02xports additional for stepper motor, display panel: 16x02lcd, display panel 8 segmentg. provision for programmingthe microcontroller. serial and socket communciationfacility. as per sample, gear sensor. gear sensorpcb. specification : inputs: active lo, 8 nos, outputs : 8 nos, through 15 pin d connectors, 811c, as per drg no a4 515tata/mmj/mgs 37699., power cable. 2 core powercable. type yy.1 sq mm dia strength 8.1 kg, 3 core powercable. h07-rnf-1.5 sqmm dia isi standard, 3 core powercable. h07-rnf-2.5 sq mm dia isi standard, signalcable. 10 core cable unshielded. type yy 6.3mm diastrength 8.1 kg., 15-core cable gear sensor pcb tointerface pcb with 15-pin male & female d-sub endconnectors 1m length cable : type yy 6.3mm diastrength 8.1 kg connectors :itt d-sheel connector, as per515 circuit diagram., 25 core cable unshielded. screened6.3mm dia, connector. 2 pin connector. 2 pin wegoconnector plug male and female sockets pair, 0.138 3.5mm pitch 180 degree. 10 amps, 300 volts. color gray, housing material nylon 6/6. insulation hight 13.40 mm.contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timble pins., 3 pinconnector. 3 pin wego connector plug male and femalesockets pair, 0.138 3.5 mm pitch 180 degree. 10 amps, 300 volts. color gray, housing material nylon 6/6. insulationhight 13.40 mm. contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timblepins., connector. 4 pin connector. 4 pin wego connectorplug male and female sockets pair, 0.138 3.5 mm pitch180 degree. 10 amps, 300 volts. color gray, housingmaterial nylon 6/6. insulation hight 13.40 mm. contactmaterial copper alloy. 14-28 awg, part no 2946-231-105nd.isi standard. with circular timble pins., 10 pinconnector 10 pin wego connector plug male and femalesockets pair, 0.138 5 mm pitch 180 degree. 16 amps, 300volts. color gray, housing material nylon 6/6. insulationhight 13.40 mm. contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timblepins., 16 pin connector 16 pin wego connector plug maleand female sockets pair, 0.138 5 mm pitch 180 degree.16 amps, 300 volts. color gray, housing material nylon 6/6.insulation hight 13.40 mm. contact material copper alloy.14-28 awg, part no 2946-231-108 nd.isi standard. withcircular timble pins., 15 pin automobile connector panel

Related Sub Industries : Office Automation

Telephone Units And Mobile Phones Tenders ,
Copier Tenders ,
Fax Tenders ,
Projector Tenders ,
Epabx Tenders ,
Calculator Tenders ,
Typewriter Tenders ,
Office Equipments Tenders

List of projector Tenders

Get Projector Tender Alert...

Related Sub Industries : Office Automation

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us