Filters

List of wrench-adjustable Tenders

List of latest wrench-adjustable Tenders in Indian Tenders. Click on any wrench-adjustable Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wrench-adjustable Tenders.

All-Tenders (20)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35247944 | 12 Sep, 2025

Tender Value : 0

Osmanabad - Maharashtra

Tender for gem bids for providing, providing and supplying of measuring steel tape providingand supplying of combination plier insulated providing andsupplying of screw driver insulated providing andsupplying of electrician screw driver thin stem insulatedhandle providing and supplying of electrician screw driverthin stem insulated handle providing and supplying ofpunch centre providing and supplying of knife doublebladed electrician providing and supplying of neon tester providing and supplying of steel rule graduated both inmetric and english unit providing and supplying ofhammer cross peen with handle providing and supplyingof electrical symbol and accessories charts providing andsupplying of pipe vice cast iron with hardened jaw opentype providing and supplying of table vice providing andsupplying of hacksaw frame with blade providing andsupplying of pliers long nose insulated providing andsupplying of pliers flat nose insulated providing andsupplying of pliers round nose insulated providing andsupplying of gauge wire imperial stainlees steel marked inswg mm providing and supplying of crimping tool providing and supplying of pliers side cutting providingand supplying of wire stripper adjustable length providingand supplying of hammer ball peen with handle providingand supplying of scriber knurled centreposition providingand supplying of tool kit box bag portable providing andsupplying of allen key providing and supplying of scissorsblade providing and supplying of electrical loads set ofincandescent lamp tube light cfl led light heater andgeyser providing and supplying of torque wrench providing and supplying of pipe cutter to cut pipes providing and supplying of multi meter analog providingand supplying of load bank variable providing andsupplying of wire cutter and stripper providing and bid number gem2025b6610709 dated 28-08-2025 bid document1 84 0 0 supplying of earth plate, providing and supplying of earthelectrode, providing and supplying of out side micrometer, providing and supplying of tap set, providing and supplyingof trolley for transportation of batteries, providing andsupplying of die for threading, providing and supplying ofrooftop mounting structure, providing and supplying ofelectrical wiring and switch gear rack, providing andsupplying of protective relays and contactors rack, providing and supplying of mccb, providing and supplyingof elcb and rccb, providing and supplying of fuses, providing and supplying of cables twisted pair nonmetallicsheathed cable underground feeder cable ribbon cablemetallic sheathed cable multi conductor cable coaxialcable direct buried cable, providing and supplying of solarcable red, providing and supplying of solar cable black, providing and supplying of three core wire, providing andsupplying of battery cable, providing and supplying of resincored solder, providing and supplying of solder wax, providing and supplying of mc 4 connector, providing andsupplying of pins, providing and supplying of lugs, providing and supplying of hacksaw blades, providing andsupplying of bolts nuts anchor bolts washers screws otherpins lugs etc, providing and supplying of civil work utensils, providing and supplying of plumbing tools, providing andsupplying of hydrometer, providing and supplying of solarinsulation meter, providing and supplying of pyranometer, providing and supplying of pyrheliometer, providing andsupplying of lux meter, providing and supplying ofmagnetic flux meter, providing and supplying of tongtester or clamp meter, providing and supplying ofsoldering iron, providing and supplying of temperaturecontrolled soldering iron, providing and supplying ofthermometer digital, providing and supplying of sun shinerecorder, providing and supplying of weather monitoringstation, providing and supplying of solar cell based sunlightradiation meter, providing and supplying of magneticcompass, providing and supplying of cut models of photovoltaic cell assembly, providing and supplying of cut modelof lead acid battery, providing and supplying of lead acidbattery, providing and supplying of solar simulator for solarcell characteristic study, providing and supplying of ivcurve tester, providing and supplying of sun path finder, providing and supplying of solar energy trainer withgrouping of solar cells, providing and supplying of solartracker demonstrator kit, providing and supplying of solarpv e-learning software using animations for training, providing and supplying of halogen lamp with stand forillumination of solar panels in lab, providing and supplyingof motorized bench grinder, providing and supplying ofbattery charger, providing and supplying of solarphotovoltaic module, providing and supplying of solarpanels, providing and supplying of solar charge controllerwith dusk to dawn automatic switching, providing andsupplying of solar charge controller with manual switch daylighting, providing and supplying of array junction box, providing and supplying of solar lantern, providing andsupplying of solar lantern assembly sets, providing andsupplying of home light system, providing and supplying ofsolar cell kit, providing and supplying of clinometer, providing and supplying of spirit level, providing andsupplying of anemometer, providing and supplying of dctable fan, providing and supplying of ac voltmeter mi type, providing and supplying of volt meter, providing andsupplying of ammeter mc, providing and supplying of //bid details2 / 84 ammeter mc centre zero, providing and supplying of powerfactor meter, providing and supplying of rheostat, providing and supplying of ac energy meter, providing andsupplying of kilo wattmeter analog, providing andsupplying of digital wattmeter, providing and supplying ofphase sequence indicator, providing and supplying offrequency meter, providing and supplying of dc led lamp, providing and supplying of dc pump, providing andsupplying of pwm controller, providing and supplying ofmppt charge controller, providing and supplying of inverterwith battery, providing and supplying of solar pcu, providing and supplying of solar grid tied inverterdemonstrator kit, providing and supplying of solar streetlight, providing and supplying of solar wind and hybridpower plant, providing and supplying of solar traffic light, providing and supplying of used water treatment solar plantdemonstrator kit, providing and supplying of solar dc pump, providing and supplying of demonstration kit for windgeneration wind turbine with blower, providing andsupplying of rechargeable battery, providing and supplyingof led lights, providing and supplying of rubber gloves, providing and supplying of cotton gloves, providing andsupplying of gum boots, providing and supplying of safetygoggles, providing and supplying of safety helmet, providing and supplying of first aid kit, providing andsupplying of fire extinguisher co2, providing and supplyingof working bench, providing and supplying of wiring board, providing and supplying of instructors chair, providing andsupplying of trainee chair, providing and supplying oftrainee table for two trainee, providing and supplying ofmetal rack, providing and supplying of lockers withdrawers, providing and supplying of almirah, providing andsupplying of black board white board

Central Government/Public Sector

TRN :35229059 | 16 Sep, 2025

Tender Value : 0

Cachar - Assam

Tender for gem bids for hand, heavy duty adjustable spanner 12 inch, long arm metrichex key set with ball end allen key set, brass hammer 2 to2.5 lb, slogging ring spanner 24mm, slogging ringspanner 27 mm, slogging ring spanner 28mm, sloggingring spanner 30 mm, slogging ring spanner 32 mm, slogging ring spanner 36 mm, chain pulley block 2 ton, heavy duty reversible ratchet handle 0.75 inch square, heavy duty reversible ratchet handle 1 inch square, ratcheting type torque wrench 0.5 inch square drivecapacity 60 to 340nm, straight pipe wrench 450 mm or 18inch, heavy duty straight pipe wrench 600mm or 24 inch, heavy duty chain wrench 2.5 inch, aluminium strap wrenchhandle 300mm strap size 1.125 inch x 500mm, heavy dutygrease gun coupler 4 jaw 0.125 inch bspt with hex nut, grease gun extension pipe 30 degree length 6 inch thread0.125 inch bspt, flexible grease hose length 12 inch wp240 bar end thread 0.125 inch bspt

Central Government And Public Sector

TRN :35232203 | 13 Sep, 2025

Tender Value : 65.51 Lacs

Kapurthala - Punjab

Tender for gem bids for supply, flat chisel 250 mm flat chisel 200 mm crowbar 650 mm sledge hammer 500 gm ball pein hammer 230 gm ballpein hammer 450 gm ball pein hammer 910 gm doubleended ring spanner 6x7 mm double ended ring spanner8x9 mm double ended ring spanner 10x11 mm doubleended ring spanner 12x13 mm double ended ring spanner14x15 mm double ended ring spanner 16x17 mm doubleended ring spanner 18x19 mm double ended ring spanner20x22 mm double ended ring spanner 21x23 mm doubleended ring spanner 24x26 mm double ended ring spanner24x27 mm double ended ring spanner 25x28 mm doubleended ring spanner 30x32 mm double ended ring spanner34x36 mm double ended ring spanner 36x41 mm doubleended ring spanner 41x46 mm double ended ring spanner46x50 mm double ended ring spanner 50x55 mm doubleended ring spanner 55x60 mm double ended ring spanner60x65 mm double ended open spanner 6x7 mm doubleended open spanner 8x9 mm double ended open spanner10x11 mm double ended open spanner 12x13 mm double ended open spanner 14x15 mm double endedopen spanner 16x17 mm double ended open spanner18x19 mm double ended open spanner 20x22 mm double ended open spanner 21x23 mm double endedopen spanner 24x26 mm double ended open spanner24x27 mm double ended open spanner 25x28 mm double ended open spanner 30x32 mm double endedopen spanner 34x36 mm double ended open spanner36x41 mm double ended open spanner 41x46 mm double ended open spanner 46x50 mm double endedopen spanner 50x55 mm double ended open spanner55x60 mm double ended open spanner 60x65 mm double ended tubular spanner 6x7 mm double endedtubular spanner 8x9 mm double ended tubular spanner bid number gem2025b6580691 dated 23-08-2025 bid document1 84 1 1 10x11 mm, double ended tubular spanner 12x13 mm, double ended tubular spanner 14x15 mm, double endedtubular spanner 16x17 mm, double ended tubular spanner18x19 mm, double ended tubular spanner 20x22 mm, double ended tubular spanner 21x23 mm, double endedtubular spanner 24x27 mm, double ended tubular spanner25x28 mm, slogging ring spanner 30mm, slogging ringspanner 32mm, slogging ring spanner 34mm, sloggingring spanner 36mm, slogging ring spanner 38mm, slogging ring spanner 40mm, slogging ring spanner41mm, slogging ring spanner 42mm, slogging ringspanner 44mm, slogging ring spanner 46mm, sloggingring spanner 48mm, slogging ring spanner 50mm, slogging ring spanner 55mm, slogging ring spanner60mm, slogging ring spanner 65mm, slogging ringspanner 75mm, slogging open spanner 30mm, sloggingopen spanner 32mm, slogging open spanner 34mm, slogging open spanner 36mm, slogging open spanner38mm, slogging open spanner 40mm, slogging openspanner 41mm, slogging open spanner 42mm, sloggingopen spanner 44mm, slogging open spanner 46mm, slogging open spanner 48mm, slogging open spanner50mm, slogging open spanner 55mm, slogging openspanner 60mm, slogging open spanner 65mm, sloggingopen spanner 75mm, adjustable wrench 24mm, adjustable wrench 30mm, adjustable wrench 36mm, adjustable wrench 46mm, pipe wrench 75x600 mm, pipewrench 60x450 mm, pipe wrench 40x300 mm, groovejoint plier 300 mm, combination plier 200mm, flatscrewdriver 50mm, flat screwdriver 75mm, flatscrewdriver 100mm, flat screwdriver 125mm, flatscrewdriver 150mm, philips screwdriver 50mm, philipsscrewdriver 100mm, philips screwdriver 150mm, philipsscrewdriver 200mm, philips screwdriver 300mm, hexallen key 1.5mm to 10mm set, hex allen key 14mm, hexallen key 16mm, hex allen key 17mm, sledge hammer5000 gm, sledge hammer 10000 gm

Central Government And Public Sector

TRN :35222503 | 08 Sep, 2025

Tender Value : 0

Barmer - Rajasthan

Tender for gem bids for non, combination spanners set, double end open wrench set, double end ring wrench set, slogging open wrench set, slogging ring wrench set, socket set for 1 by 2 inchsquare driver, socket set for 3 by 8 inch square driver, socket set for 3 by 4 inch square driver, socket set for 1inch square driver, ratchet wrench, driver extension, cylinder key, adjustable wrench, pipe wrench, allen keywith ball end, allen key set, ball pein hammer, sledgehammer, common knife, putty knife, square shovel, edging spade, deck scraper, flat scraper, scrapper, needle file set, crow bar, flat file, half round file, round file, square file, triangle file, punch, flat chiesel, combination plier, long nose plier, circlip plier internal, circlip plier external, screw driver, bolt cutter, diagonalcutting plier, groove joint plier, hacksaw frame, hacksawframe blade, tin shear, scissor, flange wedge, octagonal chiesel, crate opener, drum opener, drumopener s type

Central Government/Public Sector

TRN :35226425 | 16 Sep, 2025

Tender Value : 0

Bharuch - Gujarat

Tender for gem bids for bid number gem2025b6595661 dated 26-08-2025 bid document1 41 1 1 bihexagonal ring spanner, double open endspanners with rib set*, combination spanner 8mmto 32mm, bihexagonal 21sockets setv8 to 32mmchrome vanadium st in metal box 22soc & 5accs. is-7, tubular spanner, heavy duty pipe wrench 12, pipewrench 18, pipe wrench heavy duty 24, pipewrench l-1200mm, sledge hammer 20 lb, sledgehammer with handle 15 lb, sledge hammer withhandle 10 lb, hammer with handle 6 lb, ball pinhammer 1 lb, adjustable wrench 8, adjustablewrench 12, double open end spanner 36x41, double open end spanner 41x46, chain pipe wrench920mm x585mm, chain pipe wrench 1100mmx834mm, chain pipe wrench 1200mmx1100mm, chain pipewrench 1610mmx1360mm, file 1/2 round 2 cut 2cut10 in, file flat 2 cut 2ble cut 12in, flat filesmooth 12, needle file set, triangular file 12, screwdriver, 300 x 10 mm, screwdriver flat blade10x450, long nose plier 6 in insulated, 7 externalcirclip plier, ratcheted torque wrench 7 to 35 kg-m, torque wrench cap100-400lb. ft 3/4 sq. dr, airratchet wrench 1/2 sq dr, pneumatic impactwrench 1/2 sq. dr., angle grinder 4, grinderhand small straight, cutting pliers insulatedhandle, tool box with lock, allen key set 2 mm to20 mm, allen key set 1/16 to 1/2 in, flat cold chisel1x10 in, spirit level 18, measuring tape 5 mts, insulated plier 8 with side cutter, screw driver, 10 engineers screw driver blade 8mm, polend typeheavy duty hack saw fram 12, screw driver setwith tester, manual crimping tool upto 25 sq mm, cable stripper upto 5 sq mm, vice grip plier 230/250mm, knife 6, flat file rough 8, round file rough8, half round file rough 8

Central Government / Public Sector

TRN :35214140 | 12 Sep, 2025

Tender Value : 0

Dehradune - Uttaranchal

Tender for gem bids for adjustable spanner wrench

Central Government/Public Sector

TRN :35220419 | 15 Sep, 2025

Tender Value : 18.50 Lacs

Kupwara - Jammu And Kashmir

Tender for gem bids for pipe, bid number gem2025b6604196 dated 23-08-2025 bid document1 53 1 1 composite multi layer pipe of size inner dia 25mm and outerdia 32mm as per tech spec, gi tank nipple 25mm 6 inchwith check nut and washer, ppr elbow 32mm, ppr socket32mm, ppr equal union inner dia 25mm and outer dia32mm, ppr end cap 32mm dia suitable for 32mm outer dia, ppr connector 32mm dia suitable for 32 or 25mm outer diapipe, ppr tee 32mm dia suitable for 32mm outer dia pipe, ppr reducer 32mm dia suitable for 32mm outer dia pipe, gi nipple 25mm 3 inch long, m seal 100 gm each pkt, cotton thread 100m long, bib cock brass 15mm, gi nipple25mm 4 inch long, gi nipple 25mm 6 inch long, gi equalunion inner dia 25mm and outer dia 32mm, gi tee 25mm, gi tee 15mm, gi socket 25mm, gate valve brass gunmetal 25mm dia, gi pipe 15 mm dia med grade, gi pipe 20mm dia med grade, gi reducer 25mm to 15mm, gi elbow25mm, gi elbow 15mm, gi nipple 15mm 4 inch long, ginipple 15mm 6 inch long, gi socket 15mm, gi union 15mm, gi union 25mm, gi plug 25mm, gi plug 15mm, tmtanchor pins to secure cml pipe at 10m distance, triplexplunger pump of 7.5 hp at 550 rpm with discharge capacityof 46 lpm as per tech spec, triplex plunger pump of 5 hp at450 rpm with discharge capacity of 38 lpm as per tech spec, pre fabricated pump shed of size 2.4m x 2.4m and height1.8m at front side and 1.60 m at rear side as per drg att, rotational moulded polyethylene water storage tanks 5000ltrs tripple layer, quick setting compound rapidite, m sandfind sand free from moisture organic matter confirming tois 383-1970, aggregate 20mm conforming to is 383-1970, aggregate 40mm conforming to is 383-1970, commonbuilding burnt clay bricks sub class b of size 23cm x 11.5cmx 7.5cm conforming to is 1077 -1986, hdpe sand baglaminated off size 75x40cm sand colour and each baghaving weight not less than 60gms, tasla iron 18 inch, mason trowel or karchi, plaster trowel with hard woodenhandle, showel with wooden handle, brick hammer 1.2 kgs, multipurpose non slip rubber gloves make safeyura esabjupiter seamless, adjustable spanner 12 inch, hacksawframe with 2 blade, fawda with wooden handle, pipewrench 12 inch, pipe wrench 18 inch, crowbar 25mm 5 ftlong, aluminimum spirit level 6 inch, brick line, rammerwith wooden handle wt 5 kg, spanner adjustable 18 inch, iron sheet cutting machine, sheet cutting blade, plumbingdye set 25-50 mm, hacksaw frame blade double end, bricktrowel steel 305 mm with handle., plaster trowel with hardwooden handle isi marked., galvanised iron pan mortartasla 16 gauge 16 inch dia minimum weight of 1.5 kg, showel square nose 14 gauge tata high carbon steel, product code svl 022, brick hammer 1.2kgs, masontrowel karchi, picks axes with chiesel and point endnominalweight 3.0 kg length 595 mm with hard wooden handle, phowrah with hard wooden handles with min weight 2.00kgs, crowbar 25mm 5 ft long, rammer with woodenhandle of wt 510 lbs, aluminum spirit level 6 inch, industrial safety helmet ratcht colour orange or yellowmake shelcom melcom akiton, spectacles, frameless with99.9 percentage uv protected polycarbonate clear lens, hand glove pairs having hppe cut 4 liner 13 gauge withblack pu coating make karam super safety, reflective vestmake shelcom, melcom, akiton, rain poncho camouflagepattern makeshalimaar or equivalent., mega phoneam215m make ahuja equivalent, gum boot make hilsonvelsafe wth //bid details2 / 53

Central Government And Public Sector

TRN :35211380 | 12 Sep, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids for refrigeration, condenser blade, 4 mfd capacitor, samsung timer, whitewrapping tape, teflon tapes, cello tape 2 black, cottonwaste, danfoss relay set 20 deep freezer, 80 by 100 mfdcapacitor, minus 20 deep freezer square type, pinremover charging, thermostat minus20, relay danfoss, capacitor 4 mfd, condenser fan blade for 2 ton llyod ac, pinch pliers, t handle 10inch, t handle 12inch, sandpaper, 1 by 4inch ratchet, refrigerant recovery plier, allen key set in inches, cold room evaporator fans, 8 mfdcapacitor, nose pliers, wire cutter, charging line r32, two way manifold gauge with box and hose, 46 pcs set, cylinder key, tourch for butane gas cylinder, swagingtools, rough file with handle, double end spanner set6x32 mm, t set 13inch, t set 14inch, drain line spring, single gauge high side, measuring tape 5 meters, expansion valve for cold room, condenser motor, capacitor3 mfd, digital temp meter, samsung heater, timer, condenser fan blade, valve 3by8inch hand shut off, cylinder valves, condenser motor, fan blade, hand cutterblade iron, adjustable wrench 6inch, adjustable wrench8inch, adjustable wrench 12inch, allenkey set mm, flaringtools set with box, smooth file with handle, r22 chargingline, t handle only 1by4inch, multitec screw driver, thandle 8inch, t handle 11inch, t handle 13inch, tubecutter, flare nut 3by4inch, square type condenser fanmotor, tong tester with probes and leather cover, screwdriver long, hammer with wooden handle, cutting plier, tube cutter small, hexa frame with blade, evaporator fanmotor for lg refrigerator, condenser copper coil makellyod, filter, single pressure gauge high side500psi, gauge value, danfos 20 relay olp set, try square set, valve core removal tool, digital vernier callipers withbatteries, siron soldering iron set, soldering wire, /bid number: gem/2025/b/6597172* /dated: 22-08-2025 & & / bid document1 / 87 & & /item categorycompressor cable kit, handset valve 1by4inch, cuppler, 24 socket wrench set ratchet, pin valve, charging linehandle, capacitor 50 mfd, 3 way 30 amps connector, sstank nipple 1by2inch, pvc connection pipe 1 by 2 inch, rowater purifier t type tap, ro water purifier tap tank kenttype, charging line rubber, pipe wrench 16inch, bearings, oil seal, ss breazing roads, bluestar indoor blower for1point5 ton sac, line tester, screwdriver small, screwdriver large, handle t, jet pump handle small, araldite 500gms, double ended ring spanner set, singleguage low pressure for vaccume, t type handle spannerset, continuity tester compressor check, servicing covers, compressor for 345 liters refrigerator, electrical relay, compressor for minus20 deep freezer 320 liters, compressor for 165 liters bpl make refrigerator, compressor for minus20 deep freezer 350 liters, filter drierpencil type, compressor for -20 deep freezer 500 liters, compressor for 1point5 tr split ac rotary type, sidedummy nuts 5by8inch, side dummy nuts 1by2inch, sidedummy nuts 1by4inch, side dummy nuts 3by8inch, dummy nuts 1by4inch, ductable split ac indoor blower, rubber bushes, minus20 deep freezer compressor, driercum filter, refrigerant r 600a, hand shut valve for r600aportable cylinder, water pipe pvc, acetylene cylinderregulator, oxygen cylinder regulator, hose pipe foracetylene, hose pipe for oxygen, torch for oxygenacetylene cylinder, clamps for hose pipes, hand hacksawbladed, axial fan motor for hitachi 16point5 ton ac, compressor for ice machine 120 kg per hr production, filtercum drier, compressor for bluestar split ac 1point5 ton, capacitor 45 mfd, capillary tube gauge, soldering liquidflux, blower for lloyd make split ac 1point5 ton, pvc pipe3by4inch, pvc bends 3by4inch, pvc pipe 1inch, pvc bend1inch, clamps 3by4inch, clamps 1inch, pvc t joint3by4inch, pvc solvent, cutting machine blade, vc t joint1inch

Central Government/Public Sector

TRN :35204617 | 04 Sep, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for supply of adjustable interchangeable tubular torque wrench.

Central Government/Public Sector

TRN :35196149 | 08 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for gem bids for non sparking adjustable wrench (v2) (q2)

Related Searched Keywords : wrench adjustable

List of wrench-adjustable Tenders

Tender for gem bids for adjustable spanner wrench

Tender for supply of adjustable interchangeable tubular torque wrench.

Tender for gem bids for non sparking adjustable wrench (v2) (q2)

Get wrench adjustable Tender Alert...

Related Searched Keywords : wrench adjustable

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us