Filters

List of wires Tenders

List of latest wires Tenders in Indian Tenders. Click on any wires Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wires Tenders.

All-Tenders (39)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35766066 | 10 Nov, 2025

Tender Value : 21.01 Lacs

Korea - Chhattisgarh

Tender for gem bids for high strength deformed steel bars and wires for concretereinforcement v2 isi marked to is 1786 q2

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35761069 | 10 Nov, 2025

Tender Value : 0

Jorhat - Assam

Tender for gem bids for 5afh, fiber tape, ultra high strength, 2mm width usfda, bsi, euce certified, fiber wires with ulmwpe core and braidedjacket of polyester with mounted needle, endobutton withadjustible length fiberwire or orthochord loop for acl small, for soft tissue graft fixation in femur during aclreconstruction, , cancellous bone screw 3.5mm, puretitanium length 16mm, 3.5 mm locking one third tubularplate with 06 compatible locking screws and two 3.5 mmcortical screws., synthetic bone graft granules tricalciumphosphate 5 ml per10 ml, postoperative presterile silverhydrofibre waterproof orthopaedic flexible dressing 9 x 25cm, biocomposite interference screw, prepacked, presterilised screw diameter 6 mm to 12 mm, length 15 mmto 35 mm for acl or pcl reconstruction, cannulatedcancellous screws dia 6.5 mm, threading 32mm fromlength 35mm to 110mm at intervals of 5mm with washer ti316l ss, headless compression screw, 2.4 mm shortthread titanium, reconstruction plates for 3.5 mm screws94 mm 8 holes, lc lcp 3.5, 7 holes, 4.5 mm arthroscopicshaver blade usfda, bsi, eu ce certified, compatible withexisting device, end resector for arthroscopic shaversystem, disposable, presterilised, 3 to 5.5 cm diam, arthroscopy beath needles, polybutylate coated braidedpolyester orthosuture, size no 5, half circle taper cut, 45mm single needle, ethibond, sterile foil with single thread, box of 10 or 12, cruciate retaining fixed bearing modularknee replacement prosthesis, cemented. differentcompatible sizes, all inside meniscal repair implant system. /bid number: gem/2025/b/6806977* /dated: 30-10-2025 & & / bid document1 / 22

State Government

TRN :35751175 | 11 Nov, 2025

Tender Value : 12.00 Lacs

Baramulla - Jammu And Kashmir

Tender for improvement of electrification system and dismantling of idle defunct power, communication, data cables wires and providing proper segregated for same at district dev. commissioners office complex baramulla

State Government

TRN :35733105 | 10 Nov, 2025

Tender Value : 2.95 Lacs

Mandi (Hp) - Himachal Pradesh

Tender for sh-replacement and maintenance of damaged e.i. accessories worn out safety devices, wires and light fixture of parking area, microbiology lab, girls hostel and block-b of hospital building therein r.m of e.i. accessories of various non residential building at slbsgmc and h nerchowk

Central Government / Public Sector

TRN :35736420 | 01 Dec, 2025

Tender Value : 0

Multi Location - Multi State

Tender for supply of e-beam irradiated thin-walled elastomeric cable having tinned annealed copper wires with insulation and sheathing of cable above 750v and up to 1.8/3.0 kv for coaching stock single core of size 150 sq. mm conforming to rdso specification no. elrs/spec/elc/0019/ rev.4, of february 2018 or latest if any.

Central Government/Public Sector

TRN :35736757 | 10 Nov, 2025

Tender Value : 0

Noida - Uttar Pradesh

Tender for gem bids for wires 1x4.0 mm2 cu pvc fr type, wires 1x2.5 mm2 cupvc fr type

State Government

TRN :35737147 | 10 Nov, 2025

Tender Value : 2.91 Lacs

Mandi (Hp) - Himachal Pradesh

Tender for sh - replacement and maintenance of damaged e.i. accessories worn out switch, socket, wires, light fixture, exhaust fan and geyser in various floor of hospital r.m of e.i. accessories of various non-residential building at slbsgmc and h nerchowk

Central Government/Public Sector

TRN :35740354 | 10 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for spares, packing poplin 90mtr, tape 2 inch brown, tape 2 inchtransparent, sketch pen, marker pen, packing gatta, ironneedle, spring washer 10mm 12mm 13mm 14mm 15mm16mm 17mm 19mm 20mm 22mm 24mm 27mm 30mm32mm, nut and bolt 10mm 12mm 13mm 14mm 15mm16mm 17mm 19mm 20mm 22mm 24mm 27mm 30mm32mm, fevicol sr 998, fuse 5 amp, fuse 10 amp, fuse15 amp, dc bulb 12v 10 w, anabond, split pin, threadtape, araldite, feviquick industrial use, o ring kit, gasket sheet, banjo washer copper 10mm 12mm 13mm14mm 15mm 16mm 17mm 19mm 20mm 22mm 24mm27mm 30mm 32mm, banjo washer alluminium 10mm12mm 13mm 14mm 15mm 16mm 17mm 19mm 20mm22mm 24mm 27mm 30mm 32mm, banjo union 10mm14mm 16mm 17mm 19mm 22mm 24mm 27mm 30mm, bleeding nipple 8mm 9mm 10mm, straight push inpneumatic connector 8mm 10mm 12mm 14mm 16mm, hose clamp 8 12mm 10 16mm 13 20mm 16 25mm 2032mm 25 38mm 30 45mm 32 50mm 40 60mm, wind shieldsilicone sealant, sealent caulking gun, heat shrinkablesleeve 5mm, heat shrinkable sleeve 2 5mm, heatshrinkable sleeve 1 5mm, heat shrinkable sleeve 1mm, heat shrinkable sleeve 0 5mm, heat shrinkable sleeve 025mm, desoldering wire roll, soldering wire 50gm 60 40grade 22 gauge, soldering flux quickfix, ikis emery paperk622 standing paper, pidilite w 40 spray 420ml, electroniccleaner spray falcon 530 420ml, wirebus 10 wires, diods in4007, resistance 10 100 200, capacitors220microfarad 50volt 65 volt, fuse 1amp, fuse 2amp, fuse 2 5 amp, fuse 7 5 amp, measuring tape, welding rod3 25mm, 4inch grinder wheel, 15 amp socket, apronleather, emery paper metal and plastic, solution puncture, tube less tyre punture kit /bid number: gem/2025/b/6837562* /dated: 29-10-2025 & & / bid document1 / 36

Central Government/Public Sector

TRN :35722491 | 12 Nov, 2025

Tender Value : 0

Kannur - Kerala

Tender for gem bids for bldc motors 90 70 50 mm edf with motors 04 each, lipobattery with bms 4000 and 8000 mah, battery charger withover charger protection, carbon fibre rods 3mm x 5mtr, carbon fibre rods 5mm x 5mtr, carbon fibre rods 10mm, araldite adhesive 100ml glue gun and glue sticks, servomotors 35 kg torque, 1km range camera module with fpv rxtx and display module, wires and connectors, motormounts, rxtx 2 skydroid long range transmitter, propellers5 in 7in 10 in cw ccw carbon fibre, esc 40 60 80 amps, 2mm 3mm 4mm 5mm sheets, 6mm balsa wood sheets, balsa wood stiffners 5x5 mm 2x10 mm and round sticks5mtr each, stiffeners 3mm ply board aluminium sheets10mm 5mtr, styrofoam sheets structural material andlaminating material, connecting linkages and mechanism, cutting tools and accessories

Related Searched Keywords : wires

List of wires Tenders

Tender for gem bids for high strength deformed steel bars and wires for concretereinforcement v2 isi marked to is 1786 q2

Tender for improvement of electrification system and dismantling of idle defunct power, communication, data cables wires and providing proper segregated for same at district dev. commissioners office complex baramulla

Tender for sh-replacement and maintenance of damaged e.i. accessories worn out safety devices, wires and light fixture of parking area, microbiology lab, girls hostel and block-b of hospital building therein r.m of e.i. accessories of various non residential building at slbsgmc and h nerchowk

Tender for gem bids for wires 1x4.0 mm2 cu pvc fr type, wires 1x2.5 mm2 cupvc fr type

Tender for sh - replacement and maintenance of damaged e.i. accessories worn out switch, socket, wires, light fixture, exhaust fan and geyser in various floor of hospital r.m of e.i. accessories of various non-residential building at slbsgmc and h nerchowk

Get wires Tender Alert...

Related Searched Keywords : wires

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us