Filters

List of wire-cable Tenders

List of latest wire-cable Tenders in Indian Tenders. Click on any wire-cable Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wire-cable Tenders.

All-Tenders (191)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35982739 | 05 Dec, 2025

Tender Value : 18.52 Lacs

Hoshangabad - Madhya Pradesh

Tender for gem bids for mixer, microphone cable xlr 20 mtr, microphone cablejack to jack cable mono 20 mtr, power cable male female20 mtr, power distribution hub with cable and professionalconnectors 100 mtr, jack to jack pin mono, male xlr, female xlr, power connector male, power connectorfemale, microphone storage box, speaker hard case withwheel for jbl 835, mixer console case for yamaha mixer mg20 xu, mixer console case with wheel for qu32, amplifierhard cover rack, cross over, effect processor, stabilizer 5kva manual, amplifier crown, shure wireless microphone, microphone stand, mic clip plastic, podium microphone, digital piano with adaptor

State Government

TRN :35983700 | 05 Dec, 2025

Tender Value : 80.00 Lacs

Rajsamand - Rajasthan

Tender for supply of construction material and equipment - ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash patal 40 mm thick, glass, 3 mm. coarse glass, paint, enamel paste, dipping paper, 7 lime - for whitewashing (saw/bud), primer (for iron/wood), petroleum productsin gram panchayat gajpur for fy 2025-26

Central Government / Public Sector

TRN :35984460 | 16 Dec, 2025

Tender Value : 0

Kannur - Kerala

Tender for gem bids for camera interchangeable lens type 102 megapixels or abovemedium format, compatible lense 85 mm, compatiblelense 45-100 mm, camera with lens 50 mm, dronecamera, studio light with stand and battery backup 700w, studio light with stand and battery backup 460w, trollybag, studio light 200-400 w pocket flash, dslr camerawith extra battery and charger, 24-70 lens for dslr, 70-200 lens, professional light stand as per light set up, round head camera flash with acessories, normal flash, ring flash head, backpack camera bag, 9 carbon fibertripod with y-11 ball head, studio backdrop sysytemmanual, paper backdrops hand painted different colour, studio backdrop and backdrop stand with different colour, portable studio backdrop system with fabric, mobilegimbbal, 360 degree photography turntable for productshooting, umbrella, barn door set with grid 55 w, barndoor set with grid portable handheld rgb led light, snoot, radio trigger, compatible radio wireless flash triggerwith camera and studio light, light tent, tethering cable, pantograph system, video tripod, action camera withwater proof, reflector stand, 24 -105mm compatible lensfor canon mirrorless camera, 100 mm macro lens forcanon mirrorless camera, battery charger for model lp e19, battery charger for model lp e6nh, battery charger forgodox v860 iii c speedlite flash, battery for godox v860 iiic speedlite flash, card reader, external hard disk, lensecleaning kit, speed light bracket, sd card high speed, studio continuous light 60watts and above /bid number: gem/2025/b/6910883* /dated: 25-11-2025 & & / bid document1 / 48

Central Government/Public Sector

TRN :35985353 | 17 Dec, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for qqb575r34t0500; copper/mesh, lmr-400; rf cable, sate3320yh004; alt: sate3320yh004-m; wire, m22759/86-02; copper/e-wire

Central Government/Public Sector

TRN :35986339 | 05 Dec, 2025

Tender Value : 11.00 Lacs

Kolkata - West Bengal

Tender for gem bids for entry and mid level laptop - notebook q2, scanner v3 q2, all in one pc v2 q2, computer printer v2 q2 * * // ./ ./ % %/years of past experience required forsame/similar service3 year s 2 2 % % 8 8 /mse exemption for years of experienceand turnoverno& % & % 2 2 % % 8 8 /startup exemption for years ofexperience and turnoverno 9 9 & & /document required fromsellerexperience criteria, past performance, certificate requested inatc, oem authorization certificatein case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation by thebuyer; ; > > ? ? & & @ @ ? ? b b? ? % % /do you want to show documentsuploaded by bidders to all biddersparticipated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & f f g g / minimum number of bidsrequired to disable automatic bid extension1 g /bid number: gem/2025/b/6921421? /dated: 24-11-2025 & & / bid document1 / 18 ? ? g g, , . . -- / / number of days for which bid wouldbe auto--extended3 ; @ ; @ ? ? ? ? / /number of auto extension count1 8 % 8 % /past performance20 % s %s % ?9 ?9 ? ? /bid to ra enabledno 8 8 /type of bidtwo packet bid8 8 u u /primary product categoryall in one pc v2 v v & x & x /time allowed for technical clarificationsduring technical evaluation2 days / / f f y y / / 8 8 / % % @ @ > > /inspection required byempanelled inspection authority / agenciespre-registered with gemno v v /estimated bid value1100000 v v y y /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail b /advisory bankstate bank of india /emd amount11000 /epbg detail f /requirednoa. 2 % & 8& % & % 8 b ^ s /emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevantcategory as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers forservices are eligible for exemption from emd. traders are excluded from the purview of this policy.b. , , / @ ? / emd & performance securityshould be infavour of beneficiary, wherever it is applicable. /beneficiary : pfa2 / 18 th floor, nab, south eastern railway, garden reach, kolkata-43pfa ? / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes ? 9 @ 8, ? v l1+x% @ / purchase preferenceto mii sellers availabele upto price within l1+x%20 ? @ 8 8 / maximum percentage of bidquantity for mii purchase preference50 % - - ? 8 2017 ; 1/; 2 & % % ? 16.09.2020 - / allow participation onlyfrom class 1/class 2 local suppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended and applicabletime to timeyes, in compliance with the mii order : dpiit orderasamended and applicable time to time /mse purchase preference /mse purchase preferenceyes f h % @8, ? v l1+x% @ /purchase preference to mse oems available uptoprice within l1+x%15 f h @ 8 8 / maximum percentage ofbid quantity for mse purchase preference251. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offeredin the bid themselves or through resellers should have regularly, manufactured and supplied same or similarcategory products to any central / state govt organization / psu for number of financial years as indicated above inthe bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates likecrac to be submitted along with bid in support of having supplied some quantity during each of the financial year. incase of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplier asdefined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum localcontent to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchasepreference, the bidder must upload a certificate from the oem regarding the percentage of the local content and thedetails of locations at which the local value addition is made along with their bid, failing which no purchase preferenceshall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local contentshall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountantor a chartered accountant for oems other than companies as per the public procurement preference to make-in -india3 / 18 order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible tobid. non - local suppliers as per mii order dated 04.06.2020 are not eligible to participate. however, eligible micro andsmall enterprises will be allowed to participate .the buyers are advised to refer the om no.f.1/4/2021-ppd dated18.05.2023. om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurementpolicy for micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 3. purchase preference will be given to mses having valid udyam registration and whose credentials are validatedonline through udyam registration portal as defined in public procurement policy for micro and small enterprisesmses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequentorders/notifications issued by concerned ministry. if the bidder wants to avail themselves of the purchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders are excluded from the purview ofpublic procurement policy for micro and small enterprises and hence resellers offering products manufactured by someother oem are not eligible for any purchase preference. in respect of bid for services, the bidder must be the serviceprovider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid inrespect of the offered product or service and buyer will decide eligibility for purchase preference based ondocumentary evidence submitted, while evaluating the bid. if l-1 is not an mse and mse seller s has / have quotedprice within l-1+ 15% selected by buyer of margin of purchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to match l-1 price and contract will be awarded for 25% selected by buyerpercentage of total quantity. the buyers are advised to refer the om no. f.1/4/2021-ppd dated 18.05.2023om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policy formicro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. benefits ofmse will be allowed only if seller is validated on-line in gem profile as well as validated and approved by buyer afterevaluation of documents submitted. 4. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount and fordetermining the eligibility criteria related to turn over, past performance and project / past experience etc. this has norelevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bidparticipation. also this is not going to be used as a criteria in determining reasonableness of quoted prices which wouldbe determined by the buyer based on its own assessment of reasonableness and based on competitive prices receivedin bid / ra process. 5. past performance: the bidder or its oem themselves or through re-sellers should have supplied same or similarcategory products for 20% of bid quantity, in at least one of the last three financial years before the bid opening dateto any central / state govt organization / psu. copies of relevant contracts proving supply of cumulative orderquantity in any one financial year to be submitted along with bid in support of quantity supplied in the relevantfinancial year. in case of bunch bids, the category related to primary product having highest bid value should meet thiscriterion. entry and mid level laptop - notebook 5 pieces 9 9 1 2 & & % % % % i i @ @ % % 8 j8 j f f /minimum 50% and 20% local contentrequired for qualifying as class 1 and class 2 local supplier respectively x x /technical specifications x / as per gem category speci cation /speci cation x x /specificationname f f v v /bid requirementallowed valuesprocessorlaptop typeentry levelprocessor numberamd ryzen 3 5425u, intel core i3 - 1215u or higheroperating systemoperating system factorypre-loadedwindow 11 professionalmemoryram size gb16.0 or higherdisplaydisplay size in cm -diagonal35.56 to 38.09 14 in to 14.99 instoragecapacity of storage drive ingb512, 1024, 2048 or higher4 / 18 additional specification parameters - entry and mid level laptop - notebook 5 pieces specification parameternamebid requirement allowed valueswarranty3 years* bidders offering must also comply with the additional specification parameters mentioned above. //s ? l s ? l /consignees/reporting officer and quantity9. .9. ./s.no. //s ? l s ? l /consigneereporting/officer /address /quantity? ? ? ? /deliverydays1kankan nag700043, 11, garden reach road, se railway, kolkata560scanner v3 2 pieces 9 9 1 2 & & % % % % i i @ @ % % 8 j8 j f f /minimum 50% and 20% local contentrequired for qualifying as class 1 and class 2 local supplier respectively x x /technical specifications* x / as per gem category speci cation /speci cation x x /specificationname f f v v /bid requirementallowed valuesgenericscanner typeintegrated sheet fed & flat bedmaximum scan sizea4, legal and a3, a4, legal, a3 and a3+ or higherperformancemaximum optical resolutionin dpi600, 1200, 2400, 4800 or highersimplex colour scan speed at200 dpi in ppm fordocument feeder101 to 120, 121 to 140, 141 to 160 or higherduplex colour scan speed fordocument in ipm fordocument feeder221 to 240, 241 to 260, 261 to 280 or higherdocument handlingduplex scanningyes or higherautomatic document feederadf tray capacity at 75gsm in number of sheets151 to 200, 201 to 300, 301 to 500 or highercertificationon site warranty in years3 or higher5 / 18 additional specification parameters - scanner v3 2 pieces specification parameternamebid requirement allowed valueswarranty5 yearsmaximum scan sizea3* bidders offering must also comply with the additional specification parameters mentioned above. //s ? l s ? l /consignees/reporting officer and quantity9. .9. ./s.no. //s ? l s ? l /consigneereporting/officer /address /quantity? ? ? ? /deliverydays1kankan nag700043, 11, garden reach road, se railway, kolkata260all in one pc v2 5 pieces 9 9 1 2 & & % % % % i i @ @ % % 8 j8 j f f /minimum 50% and 20% local contentrequired for qualifying as class 1 and class 2 local supplier respectively x x /technical specifications* x / as per gem category speci cation /speci cation x x /specificationname f f v v /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integratedmicrophone array and speakers, an internal cpu withconnection cables and power adapter with 1 yearstandard warrantyprocessor numberintel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intelcore i9-13900t, intel core i9-13900, intel core ultra 5-235, intel core ultra 7-265, intel core i5 14600t, intelcore ultra 5 235t, intel core ultra 5 245, intel core ultra5 245t, intel core ultra 9 285 or higherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or higheroperating systemoperating system factorypreloaded with certificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb5126 / 18 displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8portsnumber of ports1-dp, 1-hdmi, 1- rj-45 10/100/1000 ethernet port, 1-usb 3.1 gen 1 type c, 1-usb 3.1 gen 2 type a, 2-usb3.1 gen 1 type a, 2-usb 3.1 gen 2 type a, universalaudio jackgenericstandheight adjustable /speci cation x x /specificationname f f v v /bid requirementallowed valuesadditional specification parameters - all in one pc v2 5 pieces specification parameternamebid requirement allowed valueswarranty3 years* bidders offering must also comply with the additional specification parameters mentioned above. //s ? l s ? l /consignees/reporting officer and quantity9. .9. ./s.no. //s ? l s ? l /consigneereporting/officer /address /quantity? ? ? ? /deliverydays1kankan nag700043, 11, garden reach road, se railway, kolkata560computer printer v2 5 pieces 9 9 1 2 & & % % % % i i @ @ % % 8 j8 j f f /minimum 50% and 20% local contentrequired for qualifying as class 1 and class 2 local supplier respectively x x /technical specifications* x / as per gem category speci cation /speci cation x x /specificationname f f v v /bid requirementallowed valuesgenericdescription of storescomputer printer with minimum 1 year on site warranty, including cartridge and power cord/adaptorprint technologyinkjettype of printingmonochrome blackpaper sizea4 and legal, a3, a4 and legal or higherprintingminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm16 to 20, 21 to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70 or higher7 / 18 minimum print speed perminute as per iso/iec 24734in a4 size-colour in ppmnot applicable or higherminimum print speed perminute as per iso/iec 24734in a3 size-mono in ppmnot applicable, 1 to 5, 6 to 10, 11 to 15, 16 to 20, 21 to25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to55, 56 to 60 or higherminimum print speed perminute as per iso/iec 24734in a3 size-colour in ppmnot applicable or higherauto duplexing printing 2-sided featureyes or higherconnectivityconnectivityusb port, ethernet port, wi-fi /speci cation x x /specificationname f f v v /bid requirementallowed valuesadditional specification parameters - computer printer v2 5 pieces specification parameternamebid requirement allowed valueswarranty3 years* bidders offering must also comply with the additional specification parameters mentioned above. //s ? l s ? l /consignees/reporting officer and quantity9. .9. ./s.no. //s ? l s ? l /consigneereporting/officer /address /quantity? ? ? ? /deliverydays1kankan nag700043, 11, garden reach road, se railway, kolkata560special terms and conditions-version:5 effective from 28-07-2025 for category entry and mid level laptop- notebook1. for buyers 8 / 18 the category has been created in accordance with the model technical specificationissued by the ministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19th august 2024, and is based on the parameters defined therein.the specifications applicable to this category are as per the meity model technicalspecification dated 19th august 2024. accordingly, buyers shall not specify or mandateany particular processor, processor brand, or manufacturer in the additional terms andconditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shallidentify the key parameters defining the products with all necessary validations related toconfiguration, type of data, restrictions, range / allowed values, allowed units etc. sellersas well as buyers while offering / buying the goods / services shall have to comply withthe validation rules / restrictions provided for in the category specification. buyers /sellers cannot add parameters and / or drop down values not provided for in categoryspecification. in view of the above, buyers are not permitted to amend or modify anytechnical specification through the additional terms and conditions, and must ensure fullcompliance with the predefined category specificationsproduct verificationa unique device serial number shall be provided by the seller at the time of supply, whichis mentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the oem website. the buyer/consigneeshould be able to perform these verifications without needing to create an account on theoem website.operating system1. there is no requirement that the oem of the laptop should be a device partner ofmicrosoft or hold a valid authorisation from microsoft 2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that the authorisation from microsoft shall not be made amandatory requirement in bids.4. if supplies are made as per brands of oems who are global device partners, then theserial number of the machine supplied can be used to check the details of theproduct from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digital keynumber should be produced with supplies, and the buyer may verify them frommicrosoft.6. in case of other oems who are sourcing from authorized distributors of microsoft, reddington, or ingram, a copy of the invoice which contains the relevant serialnumber of windows os shall be submitted with supplies, and the buyer/consigneecan verify the same from the os server website or by telephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at the timeof acceptance. for device partner machines, buyers can check the laptop oemwebsite to verify the os by entering the pcs serial number and part code number.for entities that are not device partners and source os from distributors networks, they may verify the serial number through the microsoft website or by telephone, orboth.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supply hardware is compatible with windowsoperating systemstorage retentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the laptop-notebook under atc clause.requirement of oemlogo buyers are advised to note that incorporating a condition stipulating an oem logo on themotherboard is restrictive and may not be incorporated into the bids.processors intel and amd processors are added as per model technical specification of laptop -notebook issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20249 / 18 warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/call center toverify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.om related to mii, local content andmeity advice onmodel technicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issued fromtime to time, while making procurement and follow relevant provisions as applicable.check points duringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with the agreedspecifications and configurations. in the case of a large number of units to be procured, then the buyer may opt for bidding and accordingly stipulate conditions regardinginstallation, inspection by consignees/inspection agency. consignees who receive thesupplies should be vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, the consigneemay adhere to the following to ensure that any discrepancies in supplies can be flagged, taken into account, and reflected while generating the crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and can beverified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking at theconsignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted upon by thebuyer from the seller at the time of delivery.battery backupbuyer may check/validate battery backup time with appropriate benchmark.for sellers oem websitelink/part no forproduct verification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a unique deviceserial number shall also be provided at the time of supply, which is also mentioned on theproduct. the buyer/consignee shall be able to verify the complete product details, including configuration, through the shared oem website link.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factory pre-loadedmachine. the machine should be delivered to the consignee in its original, factory-approved configuration.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to the purchaser, guaranteeing the products coverage under the specified warranty terms. the warrantycertificate should be verifiable through the oem website/customer care center.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatory formanufacturing entities. therefore, all oems shall hold valid epr registration, and theregistration number should be reflected in the catalog parameter. oems shall ensurecompliance with all responsibilities as per epr registration applicable from time to time.mandatory /statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutory requirements as perthe government of india notifications issued from time to time for hardware and softwarecomponents, as applicable.operating systemit shall be the responsibility of oems to ensure that supplies are made with genuineoperating systems.10 / 18 special terms and conditions-version:5 effective from 18-09-2025 for category all in one pc v21. for buyers:1.product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall be able toverify the complete product details, including configuration, through the oemwebsite. the buyer/consignee should be able to perform these verificationswithout needing to create an account on the oem website.a. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft or hold a valid authorisation from microsoft11 / 18 .operating systemb. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner status maysource from authorized distributors, i.e., ingram/reddington and theirauthorized channel partners.c. buyers may ensure that the authorisation from microsoft shall not bemade a mandatory requirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be used tocheck the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such as thedigital key number should be produced with supplies, and the buyer mayverify them from microsoft.f. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, and the buyer/consignee can verify the same from the os server websiteor by telephone, or both.g. in respect of verification of os, the consignee shall take necessary stepsat the time of acceptance. for device partner machines, buyers can checkthe all in one pc oem website to verify the os by entering the pcs serialnumber and part code number. for entities that are not device partnersand source os from distributors networks, they may verify the serialnumber through the microsoft website or by telephone, or both.h. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificate forwindow operating system to ensure the supply hardware is compatiblewith windows operating system12 / 18 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oem logoon the motherboard is restrictive and may not be incorporated into the bids.4.warrantya. the buyer may ensure that as soon as supplies are received, a request fora warranty certificate is made, along with logging into the oemwebsite/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchase comeswith a minimum standard warranty of one year. in case the seller hasstandard warranty more than one year, the same may be mentioned inthe catalogue including in the model name and in such case higherwarranty offered shall prevail/supersede the minimum one year warranty.5.om related to mii, localcontent and meity adviceon model technicalspecificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, asissued from time to time, while making procurement and follow relevantprovisions as applicable.13 / 18 .check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of unitsto be procured, then the buyer may opt for bidding and accordingly stipulateconditions regarding installation, inspection by consignees/inspection agency.consignees who receive the supplies should be vigilant and should completechecking to ensure that there is no scope for the supply of refurbished products.at the time of receiving supplies, the consignee may adhere to the following toensure that any discrepancies in supplies can be flagged, taken into account, and reflected while generating the crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings andcan be verified from the oem website. the above points are for guidance, and the buyer/consignee may take steps considered suitable by them forchecking at the consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insistedupon by the buyer from the seller at the time of delivery.7.hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc under atcclause.for sellers:14 / 18 .oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time of delivery.the offered model details/configuration should be available on their website. aunique device serial number shall also be provided at the time of supply, whichis also mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the shared oemwebsite link.2.changing or altering theconfigurationseller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in itsoriginal, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warrantyterms. the warranty certificate should be verifiable through the oemwebsite/customer care center.4.compliance of extendedproducer s responsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from time totime for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:3 effective from 31-01-2025 for category computer printer v21. for buyers1productverificationthe buyer/consignee shall verify the complete product details, including configuration, through the oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/call centre toverify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the printer at the time ofdelivery to ensure that the product has not been in use prior to delivery to thebuyer and may be verified using the printer s built-in print counter or an equivalenttracking system as available with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers15 / 18 oem websitelink/part no forproductverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. a deviceserial number must also be provided at the time of supply, which must also be mentionedon the product supplied. the buyer/consignee must be able to verify the complete productdetails, including configuration, through the provided oem website link. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digital formatfrom the oem to the purchaser, guaranteeing the products coverage under thespecified warranty terms. the warranty certificate should be verifiable through theoem website/customer care centre.2. the product in gem marketplace direct purchase & l1 purchase comes with astandard warranty of 1 year only and additional warranty may be opted for via thebidding process.3. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within the warrantyperiod, whichever is earlier, i.e. once the printer meets either the minimum numberof prints within the warranty period or the time duration specified, the warrantycoverage will end.4. the actual number of prints completed by the printer during the warranty periodmay be verified using the printer s built-in print counter or an equivalent trackingsystem.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid epr registration, and the registration number should be reflected in the catalogue parameter. oems shallensure compliance with all responsibilities as per epr registration applicable from time totime.9 9 > > n n/buyer added bid specific terms and conditions1. genericexperience criteria: the bidder or its oem themselves or through resellers should have regularly, manufactured and supplied same or

Central Government And Public Sector

TRN :35969238 | 16 Dec, 2025

Tender Value : 6.28 Lacs

Jaipur - Rajasthan

Tender for gem bids for wiring for circuit or submain wiring of size 2 x 15 sq mmand 1 x 15 sq mm earth wire wiring for circuit or submainwiring of size 2 x 25 sq mm and 1 x 25 sq mm earth wire wiring for circuit or submain wiring of size 4 x 25 sq mmand 2 x 25 sq mm earth wire supplying and drawing of 3x 15 sq mm sizes of frls supplying and drawing of 4 x15 sq mm sizes of frls supplying and drawing of 5 x 15sq mm sizes of frls supplying and drawing of 6 x 15 sqmm sizes of frls supplying and drawing of 3 x 25 sq mmsizes of frls supplying and drawing of 6 x 25 sq mmsizes of frls supplying and drawing of 3 x 4 sq mm sizesof frls supplying and drawing of 6 x 4 sq mm sizes offrls supplying and fixing of 20 mm size of steel conduit supplying and fixing of 25 mm size of steel conduit supplying and fixing two module stepped type electronicfan regulator supplying and fixing modular blanking plate supplying and fixing suitable size gi box with 3 pin 5 or 6amps modular socket supplying and fixing suitable size gibox with 6 pin 5 or 6 and 15 or 16 amps providing andfixing of s type or fastner type fan hook supplying andfixing of 1 or 2 module 75 mm x 75 mm size or modules gibox supplying and fixing of 3 module 100 mm x 75 mmsize or modules gi box supplying and fixing of 4 module125 mm x 75 mm size or modules gi box supplying andfixing of 6 module 200 mm x 75 mm size or modules gi box supplying and fixing of 8 module 125 mm x 125 mm sizeor modules gi box supplying and fixing of 12 module 200mm x 150 mm size or modules gi box supplying and fixingof 16 module modules gi box supplying and fixing 5 or 6 aswitch modular supplying and fixing 15 or 16 a switchmodular supplying and fixing 3 pin 5 or 6 a socket outletmodular supplying and fixing 6 pin 15 or 16 a socketoutlet modular supplying and fixing modular bell push bid number gem2025b6920715 dated 22-11-2025 bid document1 52 0 0 supplying and fixing dp sheet steel enclosure, providingand testing ding dong type sound two module call bell, dismentalling of 1200 mm ceiling fan from hostel rooms, itc of above existing 1200mm ceiling fan, dismentallingservicing and complete repairing other than rewinding anditc of 300 mm exhaust fan, dismentalling serviceing andrepairing including rewinding and itc of 300 mm exhaustfan, dismentalling servicing and complete repairing otherthan rewinding and itc of 450 mm exhaust fan, dismentalling serviceing and repairing including rewindingand itc of 450 mm exhaust fan, sitc ip20 18 20 watt ledbatten type integrated light fixture, supplying and fixing ofvertical type 15 litre capacity 2000 watt water storageelectric geyser, sitc ip20 10 watt led batten typeintegrated light fixture, installation of upto 2 tr capacitysplit ac units, pdg and fixing 1 by 4 inch dia copperrefrigerant piping, pdg and fixing 5 by 8 inch dia copperrefrigerant piping, provision of top up or additionalcharging of r-22 or 32 gas, s f suitable size ms stand forplacement of split type ac outdoor unit, providing andfixing 20 mm dia heavy duty pvc pipe, sand fsuitable sizegi box wih modular plate and cover in front on surface or inrecess including providing and fixing 25 a modular socketoutlet and 25 a modular sp mcb, supplying and fixing of 3x 2.5 sq mm pvc insulated and frls, repairing andpainting of existing 3 mtr height galvanised mild steel pole, repairing and painting of existing 7 mtr height galvanisedmild steel pole, supply installation testing commissioningof led post top type 30 watt with ip 65, sitc of 18 wattenergy efficient led type 12 inch size polycarbonate globefittings, sitc of 50 watt energy efficient led flood lightluminaire with inbuilt high power leds, supplying andlaying of 63 mm dia od 63 mm and id 51 mm nominal sizedwc hdpe pipe, laying and fixing of one number pvc xlpeinsulated and pvc sheathed xlpe power cable of 1.1 kvgrade of upto 35 sq. mm on surface, laying and fixing ofone number pvc xlpe insulated and pvc sheathed xlpepower cable of 1.1 kv grade of upto 35 sq. mm in pipe, laying and fixing of one number pvc xlpe insulated andpvc sheathed xlpe power cable of 1.1 kv grade of upto 35sq. mm in ground, laying and fixing of one number pvcxlpe insulated and pvc sheathed xlpe power cable of 1.1kv grade of upto 35 sq. mm in ground additional, supplyingand making end termination with brass compression glandand aluminium lugs for 2 x 6 sq mm 22mm size, supply of1 no xlpe insulated and pvc sheathed power cable of 1point 1 kv grade of size 2 x 6 sqmm aluminium conductorarmoured cable, providing and fixing 6 swg dia gi wire onsurface or in recess for loop earthing, supplying and fixingdigital weekly programmable time switch astronomicalweekly programmable alongwith 10 amp 3 pole powercontractor, providing laying and fixing 50 mm dia gi pipemedium class in ground complete with gi fittings includingfinishing etc as required, providing laying and fixing 32 mmdia gi pipe medium class in ground complete with gi fittingsincluding finishing etc as required, supply and fixing 40mm dia b class gi pipe 500 mm length with 150 mm x 150mm x 3mm thick ms base plate, repairing of dust andvermin proof cubical out door double door type floormounted, sitc of self contained drinking water cooler withnon cfc refrigerant energy efficient compressor

Central Government/Public Sector

TRN :35969737 | 13 Dec, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for gem bids for tail light glass, rear break shoe, head light assy., airfilter, break light bulb, parking bulb, front disk pad, selfclutch baring, silencer, fuel pump assembly, clutch platewith housing, spark plug, injector, oxygen sensor, chainsprocket, clutch cover and magnet cover packing, kilswitch on off, chain socket, speedo meter cable, clutchplate, kick return spring, front break wire, front tyrewith tube, rear tyre with tube, tail light cover assy., front disk rotter, speedometer gear, indicator front andrear, horn 12v, clutch lever hunter, main stand hunter, brake lever hunter, air filter hunter, oil filter hunter, head light bulb, eng. chassis mount. bolt, clutch leveryoke, breaker lever yoke, acc. cable, ignitions switch key, front wheel axle nut, carburetor boot, air intake tube, brake shoe front, brake shoe rear, side mirror set, speedo meter cable, speedo meter gear, rear wheelrubber cushion, rear wheel brk. fld. container, front tyrewith tube, accl. cable, indicator set, clutch cable, clutchlever, horn 12v, tappet cover gaskit kit, spark plug cap, ht lead, kick returner spring, fuel pump, fuel pumpfilter, oil filter, neutral switch, hub nut rear, self carbonbush with plate, rear drum rubber, fan belt, front wheelbearing, wheel cylinder rear, front disc pad, clutch slavecyl., clutch master cyl., belt tensioner, belt idler, trimming belt, alternator cut out, oil seal, alternator slipring, c.e. bearing alternator, d.e. bearing alternator, selfbendex pinion, self carbon brush plate, self starter shaft, air filter element, alternator pulley, brass plate forcommandant, tata 1512 clutch cleave cylinder, dieselfilter plate, solonoid switch fip 24v, banzoo washer 17no, banzoo washer 19 no, clutch plate pressure plate releasebearing 60 gb, clutch master cylinder, wheel bearing tata1613, fuel filter primary, fuel filter with water separator, u.j. cross, water separator, fuel filter, front indicatorassy. lh. rh. set, wiper blade all type 08 set, air dryer, air cleaner hose pipe, spark plug mpfi, self bendex pinion, wiper blade set, self starter bendex pinion, self solenoidswitch, u.j cross, carbon brush plate, wheel bearing rearinner, wheel bearing rear outer, wheel bearing frontinner, wheel bearingfront outer, lock patti front, lockpatti rear, front disc brake pad, bonnet opening cable, tail light assy.lh. rh set, head light assy. lh. rh set, wiper motor linkage, front indicator assy. set, fuel filterwith water separator, front disk pad set, rexine black, fome sheet 65mm 72inchx35inch 6x3, bostick compound01 ltr, cutting blade 4inch bosch, ply wood 12mm 6x4, hexa blade, hand grinder machine 800v, drill bit 4mm to12mm set, tool box kit complete set, welding glass, poprivit pkt, special gray paint 01 ltr, thinner 01 ltr, puttykg, body solder kg, anabond tube 85 gram, welding rod10 no, welding rod 08 no, m.seal

Central Government/Public Sector

TRN :35970037 | 13 Dec, 2025

Tender Value : 0

Faridkot - Punjab

Tender for gem bids for sre, ptz ip camera day and night capability, nvr 16 ch 2xsata 4k, hard disk 4 tb, optic fiber communicationoutdoor cable, media converter, poe switch 4 port, 2urack, fiber patch cord, gi pole with accessories formounting of camera, installation, integration, testing, commissioning, support gi wire, 43 inch display

State Government

TRN :35970422 | 09 Dec, 2025

Tender Value : 0

Kottayam - Kerala

Tender for gem bids for call station, interface module, license for system software, power amplifier, cat 6 cable, poe network switch, hornloudspeaker elliptical abs, cabinet loudspeaker, cableconduit and cable laying, 6u rack for amplifier, poweredspeaker, stage monitor speaker, digital or analog mixers, wireless microphones, wired microphone, wall mountbracket, floor mount stand, necessary cables andaccessories, audio equipment rack

Central Government/Public Sector

TRN :35971271 | 15 Dec, 2025

Tender Value : 7.10 Lacs

Hyderabad - Telangana

Tender for gem bids for wireless microphone confirming to is 616 under bisscheme - ii v2 q2, speaker v3 q2, audio amplifierv3 q2, speaker cable q3

Related Searched Keywords : wire cable

List of wire-cable Tenders

Tender for gem bids for qqb575r34t0500; copper/mesh, lmr-400; rf cable, sate3320yh004; alt: sate3320yh004-m; wire, m22759/86-02; copper/e-wire

Tender for gem bids for wireless microphone confirming to is 616 under bisscheme - ii v2 q2, speaker v3 q2, audio amplifierv3 q2, speaker cable q3

Get wire cable Tender Alert...

Related Searched Keywords : wire cable

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us