Filters

List of watering Tenders

List of latest watering Tenders in Indian Tenders. Click on any watering Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for watering Tenders.

All-Tenders (137)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49061058 | 19 May, 2025

Tender Value : 84.38 Lacs

Udaipur - Rajasthan

Tender for 74 mpt works in block rishabhdev range kherwara earth work, excavation/ embankment, compaction, watering, quarry rubbish.

Cooperative

TRN :49061171 | 15 May, 2025

Tender Value : 3.93 Crore

Visakhapatnam - Andhra Pradesh

Tender for tender for interior works for display corridor from aob entrance east and south to chairperson and dy. chairperson corridor at visakhapatnam port authority, visakhapatnam.; 1 1.1.18 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. cum 1 27.95 494.10 13,807.62 2 2.6.1 earth work in excavation by mechanical means (hydraulic excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge - all kinds of soil cum 1 15.40 177.50 2,733.50 3 2.25 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 1 1.69 196.00 332.02 4 4.1 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 5 4.1.8 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) cum 1 3.08 6,812.00 20,980.96 doors/windows/glazing/panelling 6 21.18 providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately) sqm 2 22.5 5,325.90 1,19,832.75 7 mr-1 sliding glazed door: providing, installation, testing & commissioning of bi-parting automatic sliding door operator complete with a pair of bi-parting doors and two fixed side screens. the door is activated by radar units mounted either side of the threshold sqm 1 22.30 10,430.24 2,32,594.36 8 9.147.a4.1 upvc window: providing & fixing upvc sliding windows 3-track minimum 2.5mm gauge (medium) (fenestech /torfenster or of approved make) with 6mm glass with all fittings like rollers, locking arrangement, beading, handle etc. & required hardware of approved quality, etc. sqm 1.00 3.30 10,993.55 36,278.72 9 mr-2 wall panelling - providing & fixing panelling as per drawing made out of frame both ways horizontally and vertically with 6mm thk.marine plywood with 1mm thk laminate of aproved shade. the skirting should be asper approved laminate as per drawing and direction,therateis including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, etc complete. note.:as per detailed drawing given by architect / instructions given by architect on site etc. complete. sqm 1.00 624.72 14,155.33 88,43,115.54 brick work 10 6.1 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 cement mortar 1:4 (1 cement : 4 coarse sand) 9.74 7,370.65 71,793.82 11 6.4. brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 6.4.1 cement mortar 1:4 (1 cement : 4 coarse sand) 18.30 9,344.35 1,71,020.29 marble & granite works 12 8.2.2.2 providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish 63.91 5,136.30 3,28,260.93 13 8.15 providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. (250g each cramp wt) kg 100 25 714.40 17,860.00 14 8.16 providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. each 90.00 90.00 43.90 3,951.00 9 wood & pvc work 15 9.1.2 providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) - sal wood cum 11 0.726 1,16,520.30 84,593.74 16 9.7 providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25mm to 40mm thick 17 9.7.3.1 plywood 5ply, 9mm thick - decorative plywood both side decorative veneer (type - 1) conforming to is 1328 bwr type sqm 11 27.72 2,724.25 75,516.21 18 9.100 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 19.0 9.100.1 125mm nos 11 11 66.25 728.75 20 9.101 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 21.0 9.101.1 single rubber stopper nos 15 15 39.60 594.00 22 9.113 providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of engineer- in-charge. nos 2 2 850.05 1,700.10 10 steel work 23 10.25 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 24.0 10.25.2 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 50.00 50.00 172.60 8,630.00 13 finishing work 25 13.4 12 mm cement plaster of mix : 13.4.2 1:6 (1 cement: 6 coarse sand) sqm 85.600 343.65 29,416.44 26 13.16 6 mm cement plaster of mix : 13.16.1 1:3 (1 cement: 3 fine sand) sqm 39.40 300.45 11,837.73 27 13.41 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 28 13.41.1 new work (two or more coats) over and including water thinnable priming coat with cement primer sqm 1 500.000 185.65 92,825.00 29 13.47 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 30 13.47.1 new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 1 500.000 171.10 85,550.00 31 13.80 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to sqm 1 100.00 156.05 15,605.00 32 13.62 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.62.1 two or more coats on new work sqm 1 500.00 226.25 1,13,125.00 21 aluminium, glazing & italian marble works 33 21.8 filling the gap in between aluminium frame & adjacent rcc/ brick/stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer-in-charge complete. 21.8.1 upto 5mm depth and 5 mm width rmtr 4 80 96.75 7,740.00 34 8.11.1 providing and fixing 18mm thick italian marble stone machine cut, mirror/ eggshell polished, marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with the cement slurry @3.3kg/sqm including the point with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing, etc. all complete as per architectural drawings and as directed by engineer-in-charge. sqm 1 165 10,414.80 17,18,442.00 35.0 11.51.1 providing and laying machine cut, mirror polished, italian marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge - 18 mm thick italian marble stone slab, perlato, rosso verona, fire red or dark emperadore etc. 36.0 25.8 design supply & installation of suspended spider glazing system designed to withstand the wind pressure as per is 875 (part-iii). the suspended system held with spider fittings of ss-316 grade steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with ss- 316 grade stainless steel spider & bolt assembly with laminated glass fins 21 mm thick. the glass fins and glass panel assembly shall be connected to slab/beams by means of ss- 316 grade stainless steel brackets & anchor bolts and at the bottom using ss channel of 50x25x2 mm using fastener & anchor bolts, non staining weather sealants of approved make, teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. the complete system to be designed to accommodate thermal expansion & seismic movements etc. the joints between glass panels (6 to 8 mm) and gaps at the perimeter & in u channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. the rate shall include all design, engineering and shop drawing including approval from structural designer, labour, t&p, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, buffer plates, fastener, anchors, ss channel laminated glass etc. all complete. for the purpose of payment, actual elevation area of glazing including thickness sqm 1 244 9,502.32 23,18,566.08 37 26.26.2 providing & fixing false ceiling 12.5mm thick gypboard ceiling surfaces in plain including g.i. suspenders forming a grid of intermediate channel at 1220mm centre to centre with ceiling sections fixed at 450mm centre to centre at right angle to the underside of intermediate channels with connecting clips complete as per india gypsum technical manual including finishing with jointing compound and joint paper tapes and priming with two coats of drywall top coat and fixing of perimeter channel at both ends. the rate shall also include cutting the gypboard for light fixtures/a.c. diffusers etc. and providing necessary and additional frame work for fixing the same. whereever perimeter channels are cut in this process, additional support shall be made for proper stability without any extra cost. the work shall be carried out as per specifications, drawing and as sqm 1.00 504.00 1,907.35 9,61,304.40 38 13.83.2 wall painting with premium acrylic emulsion paint of interior grade, having voc (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour - two coats sqm 1.00 300.00 142.80 42,840.00 demolition work 39 15.14.1 dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : of sectional area 40 square centimetres and above cum 2.00 1.68 4,459.10 7,491.29 40 15.25 dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. sqm 1.00 528.00 266.45 1,40,685.60 41 15.39.2 dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : thickness above 10 mm up to 25 mm sqm 3.00 24.00 77.75 1,866.00 42 15.7.4 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge - in cement mortar cum 3.00 4.10 ground floor walls for reception cum 1.00 27.95 32.05 2,060.20 66,027.35 43 15.12.1 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking nos 8 8 367.20 2,937.60 44 15.57 dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by engineerin- charge. 449.00 56.40 25,323.60 45 15.19 dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of engineer-in-charge. 46.0 at staircase 15mmx20mm ms rods @ 7 nos per flight density - 7850 kg/cum 112.00 0.067 kg 0.067 525.95 3.85 2,024.91 47 mr-3 reception : 4500x800 ,providing reception table as per design on site in 19 mm marine plywood frame work with 1 mm thk vineer table top, including 12 mm thk. glossy onyx alabaster film set 1 1 5,19,103.39 5,19,103.39 48 reception : 4000x800 ,providing reception table as per design on site in 19 mm marine plywood frame work with 1 mm thk vineer table top, including 12 mm thk. satvario quartz on table top rested 49 14.72 providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer in-charge .the elevational area of the scaffolding shall be measured for payment purpose.the payment will be made once irrespective of duration of scaffolding .... more in document

Government Departments

TRN :49061441 | 19 May, 2025

Tender Value : 24.14 Crore

Delhi - Delhi

Tender for bids are invited for horticulture service – manpower based model - maintenance of garden/lawn/field/nursery/park, as per tender documents; general maintenance of plant (mowing, strimming, laying, sweeping, watering, weeding), applying fertilizers, applying pesticides, tr.. total quantity :

corporations/Associations/Others

TRN :49061687 | 29 May, 2025

Tender Value : 0

Sonbhadra - Uttar Pradesh

Tender for tender for annual maintenance of ash dyke of obra thermal power station. - earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 2 excavation work by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. ordinary rock 3 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 filling of empty jute/plastic bag in full with full stitching with nylon thread and stacking in crate from any where inside/outside ash pond including cost of all labour, material, t&p etc. 5 filling with 50kg. earth 6 filling with 50kg. ash 7 clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 8 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all kinds of soil. 9 providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012,morth clause 2500, of required size, mesh type 10x12(d=100 mm with tolerance of ±2%), zinic+10% al alloy+pvc coated, mesh wire diameter 2.7/3.7mm (id/od), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(id/od), supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineerin-charge. 10 random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :cement mortar 1:6 (1 cement : 6 coarse sand) 11 dry stone pitching 22.5cm thick including supply of stones and preparing surface complete work 12 dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 13 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 14 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 15 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) 16 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars of grade fe-500d or more. 17 supplying and stacking at site 63 mm to 45 mm size stone aggregate 18 supplying and stacking at site moorum etc. 19 laying, spreading and compacting stone aggregate of specified sizes to wbm specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 20 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) 21 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 22 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 23 engagement ofunskilledlabourfor executed the unforeseen works . 24 providing hydraulic excavator with 1 cum bucketfor different type of job related to chakari ash dyke and required another workas per direction of engineer-in-charge including hire charge of hydraulic excavator with operator,fuel, lubricant etc for proper completion of work.

State Government

TRN :49062400 | 15 May, 2025

Tender Value : 0

Bhandara - Maharashtra

Tender for supplying various types of construction material , material list , 80 mm. metal white-(hand broken metal) , 40 mm metal white- (hand broken metal) , 40 mm metal black- (crusher broken metal) , 32 mm metal black- (crusher broken metal) , 20 mm metal black- (crusher broken metal) , 12 mm metal black-(crusher broken metal) , 6 mm metal black-(crusher broken metal) , sand river (unscreen) , murum , murum carting 2 km lead , murum carting 4 km lead , murum carting 6 km lead , soil , cement 53 grade , cement 53 grade (ambuja) , burnt bricks ( ii class) , fly ash bricks , mild steel bars of various sizes , tmt steel bars of various sizes , bitumen pack tin 60/70 at mumbai , murum carting only , weste material of dranage with carting , mixter machine with fuel (per day) , water tankerwith fuel , centringtar , centring rent , jcb , road roller with fuel , murum carting for mregs works , compaction of murum with watering of water tanker& levelling. , compaction of earth work with wateringof water tanker& levelling. , ferlong stone , rcc pipe with coller (300 mm) , rcc pipe with coller (450 mm) , rcc pipe with coller (600 mm) , rcc pipe with coller (800 mm) , rcc pipe with coller(900 mm) , rcc pipe with coller(1200 mm) , rcc pipe without coller(800 mm) for dustbeen , pvc pipe (63 mm) , pvc pipe (75 mm) , pvc pipe (90 mm) , pvc pipe (110 mm) , pvc pipe (150 mm) , hand wash basin 45*30 cm , flush door 32mm thick , upvc waste swr pipe 4 kg , steel pipe various size , gi fencing (chain link fencing) 4 ft , gi fencing (chain link fencing) 5 ft , gi fencing (chain link fencing) 6 ft , barberd wire fencing , steel perling (engle) , grill work , febrication work , cement sheet (patra) , tin sheet (patra) , profile sheet , rcc precast sheet , information boards , information boards (cement with painting) , wc sheet with trap (675mm) , toilet sheet , urinal sheet , cement chair , wooden door , door frame , m. s. steel door , alluminium window , water proof cement , birla white , plastic paint , oil paint , oil engine , electric motor rent , paver block , paver block rubber mould , kota stone , vitrified tiles , ceramic tiles , solution , in well boar 4.50 inch , in well boar 6 inch , apex ext. primer , apex ext. emulsion , apex interior emulsion , white putti , distemper , water tank (syntax) , kadappa stone , nahani trap , exposy primer 50 to 60 micron thik asian or any company , gi pipe 15mm dia. , gi pipe 20mm dia. , upvc pipe 50mm , upvc pipe 25mm , upvc pipe 15mm , gi puggles , three seater iron chair , water meter , 1/2 stm wall , 1/2 fta brash , 1/2 pvc pipe , 1/2 pvc elbo , pvc solvant , tapelon tape

State Government

TRN :49062462 | 15 May, 2025

Tender Value : 0

Bhandara - Maharashtra

Tender for supplying various types of construction material , material list , 80 mm. metal white-(hand broken metal) , 40 mm metal white- (hand broken metal) , 40 mm metal black- (crusher broken metal) , 32 mm metal black- (crusher broken metal) , 20 mm metal black- (crusher broken metal) , 12 mm metal black-(crusher broken metal) , 6 mm metal black-(crusher broken metal) , sand river (unscreen) , murum , murum carting 2 km lead , murum carting 4 km lead , murum carting 6 km lead , soil , cement 53 grade , cement 53 grade (ambuja) , burnt bricks ( ii class) , fly ash bricks , mild steel bars of various sizes , tmt steel bars of various sizes , bitumen pack tin 60/70 at mumbai , murum carting only , weste material of dranage with carting , mixter machine with fuel (per day) , water tankerwith fuel , centringtar , centring rent , jcb , road roller with fuel , murum carting for mregs works , compaction of murum with watering of water tanker& levelling. , compaction of earth work with wateringof water tanker& levelling. , ferlong stone , rcc pipe with coller (300 mm) , rcc pipe with coller (450 mm) , rcc pipe with coller (600 mm) , rcc pipe with coller (800 mm) , rcc pipe with coller(900 mm) , rcc pipe with coller(1200 mm) , rcc pipe without coller(800 mm) for dustbeen , pvc pipe (63 mm) , pvc pipe (75 mm) , pvc pipe (90 mm) , pvc pipe (110 mm) , pvc pipe (150 mm) , hand wash basin 45*30 cm , flush door 32mm thick , upvc waste swr pipe 4 kg , steel pipe various size , gi fencing (chain link fencing) 4 ft , gi fencing (chain link fencing) 5 ft , gi fencing (chain link fencing) 6 ft , barberd wire fencing , steel perling (engle) , grill work , febrication work , cement sheet (patra) , tin sheet (patra) , profile sheet , rcc precast sheet , information boards , information boards (cement with painting) , wc sheet with trap (675mm) , toilet sheet , urinal sheet , cement chair , woodendoor , door frame , m. s. steel door , alluminium window , water proof cement , birla white , plastic paint , oil paint , oil engine , electric motor rent , paver block , paver block rubber mould , kota stone , vetrified tiles , ceramic tiles , solution , in well boar 4.50 inch , in well boar 6 inch , apex ext. primer , apex ext. emulsion , apex interior emulsion , white putti , distemper , water tank (syntax) , kadappa stone , nahani trap , exposy primer 50 to 60 micron thik asian or any company , gi pipe 15mm dia. , gi pipe 20mm dia. , upvc pipe 50mm , upvc pipe 25mm , upvc pipe 15mm , gi puggles , three seater iron chair , water meter , 1/2 stm wall , 1/2 fta brash , 1/2 pvc pipe , 1/2 pvc elbo , pvc solvant , tapelon tape

State Government

TRN :49063324 | 15 May, 2025

Tender Value : 0

Bhandara - Maharashtra

Tender for supplying various types of construction material , material list , 80 mm. metal white-(hand broken metal) , 40 mm metal white- (hand broken metal) , 40 mm metal black- (crusher broken metal) , 32 mm metal black- (crusher broken metal) , 20 mm metal black- (crusher broken metal) , 12 mm metal black-(crusher broken metal) , 6 mm metal black-(crusher broken metal) , sand river (unscreen) , sand (nallah bed) , hard murum with royalty , soft murum with royalty , murum carting 2 km lead , murum carting 4 km lead , murum carting 6 km lead , soil , cement 53 grade , cement 53 grade (ambuja) , burnt bricks ( ii class) , fly ash bricks , mild steel bars of various sizes , tmt steel bars of various sizes , bitumen pack tin 60/70 at mumbai , murum carting only , weste material of dranage with carting , mixter machine with fuel (per day) , water tankerwith fuel , centringtar , centring rent , jcb , road roller with fuel , murum carting for mregs works , compaction of murum with watering of water tanker& levelling. , compaction of earth work with wateringof water tanker& levelling. , ferlong stone , rcc pipe with coller (300 mm) , rcc pipe with coller (450 mm) , rcc pipe with coller (600 mm) , rcc pipe with coller (800 mm) , rcc pipe with coller(900 mm) , rcc pipe with coller(1200 mm) , rcc pipe without coller(800 mm) for dustbeen , pvc pipe (63 mm) , pvc pipe (75 mm) , pvc pipe (90 mm) , pvc pipe (110 mm) , pvc pipe (150 mm) , hand wash basin 4530 cm , flush door 32mm thick , upvc waste swr pipe 4 kg , steel pipe various size , gi fencing (chain link fencing) 4 ft , gi fencing (chain link fencing) 5 ft , gi fencing (chain link fencing) 6 ft , barberd wire fencing , steel perling (engle) , grill work , febrication work , cement sheet (patra) , tin sheet (patra) , profile sheet , rcc precast sheet , information boards , information boards (cement with painting) , wc sheet with trap (675mm) , toilet sheet , urinal sheet , cement chair , woodendoor , door frame , m. s. steel door , alluminium window , water proof cement , birla white , plastic paint , oil paint , oil engine , electric motor rent , paver block , paver block rubber mould , kota stone , vetrified tiles , ceramic tiles , solution , in well boar 4.50 inch , in well boar 6 inch , apex ext. primer , apex ext. emulsion , apex interior emulsion , white putti , distemper , water tank (syntax) , kadappa stone , nahani trap , exposy primer 50 to 60 micron thik asian or any company , gi pipe 15mm dia. , gi pipe 20mm dia. , cpvc pipe 50mm , cpvc pipe 25mm , cpvc pipe 15mm , gi puggles , three seater iron chair , water meter , 1/2 stm wall , 1/2 fta brash , 1/2 pvc pipe , 1/2 pvc elbo , pvc solvant , tapelon tape , rolling shutter , bore well 6 inch , casing gi pipe 6 inch , casing gi pipe 7 inch , r.c.c. tank (0.60 x 0.90)m , upvc pipe (75mm dia) , information board (size 1.20 x 0.90) , led light 15 watt , led light 30 watt , led street light 36 watt , holder , service wire , 1/18 wire , lcb 32 amp. , led box light , reduser 11090 , air walve 50 mm , walve 90mm , walve 110mm , sub-mersible cable 3 core

Central Government/Public Sector

TRN :49063927 | 29 May, 2025

Tender Value : 8.41 Crore

Katihar - Bihar

Tender for bids are invited for custom bid for services - labour cost with uniform for interior dry cleaning, watering, window shutter closing and padlocking/unlocking of coaches at rdp, blgt, jbn & hdb stations of katihar division , custom bid for services - labour cost with uniform for interior dry cleaning, watering, window shutter closing and padlocking/unlocking of coaches at sguj station of katihar division , custom bid for services - provision of staff bonus for entire project (will be paid after submission of proof of payment) , custom bid for services - cost of material such as cleaning chemicals and equipments total quantity :

Government Departments

TRN :49065122 | 15 May, 2025

Tender Value : 70.76 Lacs

Nashik - Maharashtra

Tender for regular maintenance (watering) of divider and island in prabhag no.24,25, 28 and 31 new nashik division

Government Departments

TRN :49067168 | 20 May, 2025

Tender Value : 10.20 Lacs

Jhansi - Uttar Pradesh

Tender for tender for construction of a shed for condolence meeting at muktidham in ramrai river gadiyagaon jhansi - clearing jungle including up rooting of trunk vegetation grass bush wood trees and sapling of girth upto 30cm. measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared. 2 earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) 6 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) above plinth lvl t-beam 7 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) above plinth lvl slab 8 steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in thermo-mechanically treated bars of grade fe-500d or more. 9 brick work with common burnt clay bricks of m-150 class in super structure above plinth level upto floor v level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) 10 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) including supply of all materials, labours and t&p etc. required for proper completion of the work. 11 p.c.c. with 20 mm stone grid base of cement mortar 1:2:4 including supply of all materials, labours and t&p etc. required for proper completion of the work. 12 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 13 providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface. 14 p/l 20 mm thick kota stone flooring over 20 mm thick base of cement mortar 1:4 including supply of all materials, labours and t&p etc. required for proper completion of the work . 15 s/f of rcc bench at site (3 seater) 16 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 17 supply and fixing of sing board including painting and lettering as directed by engineer-in-charge.

Related Searched Keywords : watering

List of watering Tenders

Tender for 74 mpt works in block rishabhdev range kherwara earth work, excavation/ embankment, compaction, watering, quarry rubbish.

Tender for regular maintenance (watering) of divider and island in prabhag no.24,25, 28 and 31 new nashik division

Get watering Tender Alert...

Related Searched Keywords : watering

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us