Filters

List of water-hand-pump Tenders

List of latest water-hand-pump Tenders in Indian Tenders. Click on any water-hand-pump Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for water-hand-pump Tenders.

All-Tenders (36)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

State Government

TRN :35371702 | 29 Sep, 2025

Tender Value : 15.00 Lacs

Tikamgarh - Madhya Pradesh

Tender for inviting rates for hand pump water works material for the financial year 2025-26

Central Government/Public Sector

TRN :35372678 | 22 Sep, 2025

Tender Value : 3.78 Lacs

Kamrup - Assam

Tender for gem bids for purchase, bid number gem2025b6675734 dated 12-09-2025 bid document1 41 1 1 ramped power lighter ugb pinion with locknut, rampedpower lighter ugb crown, ramped power lighter sukhanpinion, ramped power lighter fuel filter m e no ff5511make fleet guar, ramped power lighter oil filter no lf 516make fleet guar, ramped power lighter bearing no 30206make nbc skf, ramped power lighter bearing no 30212make nbc skf, ramped power lighter bearing no 30213make nbc skf, ramped power lighter bearing no 30221make nbc skf, ramped power lighter bearing no 30214make nbc skf, ramped power lighter anabond tube 100gram, ramped power lighter m seal 250 gram, rampedpower lighter battery terminal clamp, ramped powerlighter champion sheet, ramped power lighter oil seal no85x105x13, ramped power lighter oil seal no 80 x 100x13, ramped power lighter oil seal no 50 x 68x10, rampedpower lighter oil seal no 125 x150 x 13, ramped powerlighter clutch plate as per sample, ramped power lighterhexa blade, ramped power lighter jublie clamp 1 inch, ramped power lighter jublie clamp 2 inch, ramped powerlighter jublie clamp 1.5 inch, ramped power lighter jublieclamp 3 inch, ramped power lighter jublie clamp 6 inch, ramped power lighter hose pipe 0.5 inch, ramped powerlighter hose pipe 1 inch, ramped power lighter hose pipe1.5 inch, ramped power lighter hose pipe 2 inch, rampedpower lighter locknut km 10 inch, ramped power lightersukhan indicator, ramped power lighter shut down valve, ramped power lighter rpm mtr with cable, ramped powerlighter o ring, ramped power lighter starting switch withkey 24 volt, ramped power lighter sliding sleeve, rampedpower lighter split pin 1.5 inch large, ramped powerlighter sukhan shaft cross joint, ramped power lighterdistilled water, ramped power lighter throttle wire 3mm, ramped power lighter rubber coupling with nut and nutbolt for aux engine as per sample aux engine, rampedpower lighter oil pressure gauge 0 to 7kg2, ramped powerlighter oil temp gauge with lead, ramped power lighterwater temp gauge with lead, ramped power lighter oilfilter for aux engine no 3166556, ramped power lighter vbelt b 33, ramped power lighter v belt b 41, rampedpower lighter v belt b 47, ramped power lighter v belt b48, ramped power lighter v belt b 45, ramped powerlighter ampere meter, ramped power lighter directionplate nut and bolt as per sample, ramped power lighteremery paper, ramped power lighter helical spring, ramped power lighter high extension spring 1 inch dia 1feet large, ramped power lighter bulldog grip half inch, ramped power lighter bulldog grip 1 feet, ramped powerlighter fuel tank for aux engine with connection pipe, ramped power lighter rotary pump handle, allen key set, ramped power lighter chisel 1 feet large 16mm dia maketaparia, ramped power lighter snu nut and bsolt withwasher as per sample, ramped power lighter rpm metercable //bid details2 / 41

State Government

TRN :35357619 | 22 Sep, 2025

Tender Value : 4.19 Lacs

Kangra - Himachal Pradesh

Tender for recharging of dry and defunct hand pumps through rain water harvesting structure under jsv sub division raja ka talab under division fatehpur distt. kangra h.p. sh- recharging structure of defunct hand pumps 8 nos.

State Government

TRN :35361078 | 22 Sep, 2025

Tender Value : 4.19 Lacs

Kangra - Himachal Pradesh

Tender for recharging of dry and defunct hand pumps through rain water harvesting structure under jsv sub division fatehpur under division fatehpur distt. kangra h.p. sh- recharging structure of defunct hand pumps 8 nos.

Central Government/Public Sector

TRN :35350042 | 22 Sep, 2025

Tender Value : 0

Haridwar - Uttaranchal

Tender for gem bids for forged shackles for general lifting purpose (v2) conforming to is/iso 2415, laboratory deep freezer (v2), deep water barricading with net and anchor 8 km long - up pac, porcelain insulators for overhead power lines with a nominal voltage up to and including 1000 v as per is 1445, deep search mine / metal detector as per (mha) qrs, single row deep groove ball bearing (without flange outer ring) as per is 6455, ultra low temperature laboratory deep freezer, ac spv deep well (submersible) pumping systems (v2), ac spv deep well (submersible) pumping systems, cast iron components (deepwell hand pumps components) conforming to is 15500 (part 5)

Central Government/Public Sector

TRN :35337011 | 01 Oct, 2025

Tender Value : 7.00 Lacs

Gautam Budnagar - Uttar Pradesh

Tender for gem bids for vehical, cylinder sleeve with coller set std piston stdwith pin and circlip piston ring set std big endbearing std cr bush main bearing std thrustwasher std valve inlet valve exhaust valve oilseal valve guide in let and exhaust pistoncooling jet with packing hydaraulic lash adjusterh l a with rocker assy w rff bs iv crank shaftmain oil seal front crank shaft main oil seal rear cam shaft front oil seal head gasket waterpump assy oil pump assy timing belt ac belt power steering belt air filter element fuel filterassy 3 pipe connected fuel filter assy 2 pipeconnected fuel filter element oil filter powersteering filter filter assy power steering enginegasket set complete clutch disc and pressureplate assy fly wheel assy release bearing pilotbearing fuel return leak off pipe with connector oil pressure switch hose pipe set comp set wiperblade lh rh brake disc pad front lh rh rearbreak shoe lh rh set wheel cylinder rear lh rh front shock absorber lh rh rear shock absorberlh rh thermostate valve timing belt tensioner timing belt idler pully belt tensioner assy small connecting rod bolt belt tensioner idler bush heater plug engine mounting lh rh cam shaftsensor comman rail pressure sensor fly wheelsensor temperature sensor crank sensor mapsensor hfm sensor hand brake cable radiatorcap clutch seeve cylinder lower hydraulicadopter csc fuel pipe filter to pump fuel returnpipe pump to tank two pice vaccuam pump assy piston with sleeve with ring std cylinder headcomp with valve cam shaft rocker shaft rocker bid number gem2025b6664340 dated 10-09-2025 bid document1 121 1 1 assy in let exhaust valve, engine o h gasket kit, pressure plate, disc clutch friction, spark plug, timing chain with gear, timing chain adjuster, oilseal set comp, chain with sporket set with gear, brake shoe rear, disc pad brake front, brake shoereturn spring, clutch cable, accelerator cable, crank bearing outer, crank case magnet housing, rubber coupling rear wheel, small axle, bearingwith hub rear, wheel bearing front, wheelbearing rear, foot rest front lh rh, foot restrear lh rh, clutch housing, front shockerabsorber lh rh, main relay 12 volts, speedometerassy, speedometer cable, speedometer gear, backlight assy, front indicator lh and rh side, rearindicator lh and rh side, rear brake mastercylinder, brake light switch, seat cover, fueelpipe pump to injector, fuel injector, air filter, oiltemperature sensor, fuel pump assy, sideindicator assy front both side, rear door outerhandel rh, dicky outer handel, door glassmachine lh rh, door glass machine handel lh rh, brake master cylinder assy, wheel cylinder assyrear, head light assy lh rh, front disc pad lh rh, side view mirrer lh rh, p shaft uj cross, clutchmaster cylinder, door opening catch lh sjde, fuelfilter, steering oil seal, tail light assy lh rh, steering dampher assy, radiator reservoir tank, wipper blade, steering gear box assy, clutch plate, clutch sleeve cylinder, rear view mirror lh rh, rear door dicky lock, horn 12 volts, horn 24volts, cluitch vaccum booster air assisted, pshaft center bearing, relay 24 volts all type, wipper aram, body side parking light 24 volts, starting switch push type, fan dc 24 volts 12 inch, side view mirror lh rh, fog light assy lh rh, wipper blade lh rh, head light assy with tube, ball joint lower upper tata safar, tie rod end tatasafar, shock absorber power steering tata safar i, tie rod end assy tata safar, air filter tata safar, wipper blade rh 24 inch mtata safar, wipper bladelh 20 inch tata safar, handel gripping, chain setcomplete, hydraulic pressure pipe hydraulic pumpto tank, head light assy with bulb 12 volts lh rh, wipper motor with arm with blade, combinationswitch assy, wipper blade rh lh scorpio, disc padbrake front scorpio, disc pad brake rear scorpio, m oil filter scorpiocylinder sleeve with coller set std, piston stdwith pin and circlip, piston ring set std, big endbearing std, cr bush, main bearing std, thrustwasher std, valve inlet, valve exhaust, valve oilseal, valve guide in let and exhaust, pistoncooling jet with packing, hydaraulic lash adjusterh l a with rocker assy w/rff bs iv, crank shaftmain oil seal front, crank shaft main oil seal rear, cam shaft front oil seal, head gasket, waterpump assy, oil pump assy, timing belt, ac belt, powersteering belt, air filter element, fuel filter assy 3pipe connected, fuel filter assy 2 pipe connected, fuel filter element, oil filter, power steeringfilter, filter assy power steering, engine gasketset complete, clutch disc and pressure plate assy, fly wheel assy, release bearing, pilot bearing, fuelreturn leak off pipe with connector, oil pressureswitch, hose pipe set comp set, wiper blade lh/rh, //bid details2 / 121

State Government

TRN :35324822 | 01 Oct, 2025

Tender Value : 0

Mohali - Punjab

Tender for gem bids for printiing, log book for screw water chillers, log book for mocvd, mt chilled water plant, log book for compressed dry airsystem, log book for return reciculation air handlres, logbook for acid, log book for 8 inch, fcms control room, hydrogen plant, water pump house, effluent treatmentplant log book, shift handling over report log book upw, mixed bed regeneration logboek, log chart ro unit, hpn400 gas plant log book, gas yard log book, hpn 400 shifthandling over report, gas pad gas cabinets and gaspanels log book, gas cabinets vmbs, vinyl sheet strickerin color for pasting on sludges bags, vinyl stricker forpasting in color on spent organic uaste collection cans, sclmedical officer, schs form no. 3, schs form no. 11, packing slip, ecl particulars register, duty deploymetregister, daily duty deployment register, visitor, passpink green, cisf beat book, kit record register, pay billregister, vehical log book, stock register, receiptvoucher issue voucher register, daily diary emergencyresponse team, inspection record for fire exitnguishersself adhesive, fire safety authorization for hot work, logbook of 66 kv substation, daily log sheet, daily log sheet1kv 433v substation 2, daily log sheet 11kv 433vsubstation 3, daily log sheet diesel rotary ups, dieselgenerator 1 log book, diesel generator 2 log book, dieselgenerator 3 log book, 1250kva dg set log book, 625kvadg set log book, 500kva dg set log book, 1250kva dgset a check, 125kva dg set a check, 500kva dc set acheck, 1670kva drups dg a check, 11kv scl housingcolony log book, 125kva dg set log book, shift logregister, esd indent register, envelope windows type, yellow envelopes with cloth printed, design note book withcomb binding, , file cover with tags brown colour, whitefile cover with tags, material requisition book

Central Government/Public Sector

TRN :35326699 | 20 Sep, 2025

Tender Value : 0

Doda - Jammu And Kashmir

Tender for gem bids for ttieg, two way allen key set, t handle allen key, tweezer set, battery health tester, multipurpose screw driver set 67pieces, cordless screw driver, glue gun, cleaning kit, loctite, shrink tube, magnifying lamp with light, centrepunch 3.2mm, chisel, nose circlip plier internal, nosecirclip plier external, ball pein hammers, storage box, spray gun, torque wrench, torque wrench 20 to 150 ft, screw driver set 6 pcs, water pump plier, magnetic pickuptool, piston rings compressor, oil filter wrench, workingstool

Related Searched Keywords : water hand pump

List of water-hand-pump Tenders

Tender for inviting rates for hand pump water works material for the financial year 2025-26

Tender for recharging of dry and defunct hand pumps through rain water harvesting structure under jsv sub division raja ka talab under division fatehpur distt. kangra h.p. sh- recharging structure of defunct hand pumps 8 nos.

Tender for recharging of dry and defunct hand pumps through rain water harvesting structure under jsv sub division fatehpur under division fatehpur distt. kangra h.p. sh- recharging structure of defunct hand pumps 8 nos.

Get water hand pump Tender Alert...

Related Searched Keywords : water hand pump

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us