Filters

List of valve-casing Tenders

List of latest valve-casing Tenders in Indian Tenders. Click on any valve-casing Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for valve-casing Tenders.

All-Tenders (18)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381064 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

State Government

TRN :35348869 | 22 Sep, 2025

Tender Value : 17.79 Lacs

Dharmanagar - Tripura

Tender for supplying and installation of axially split casing type centrifugal pump set, sluice valves, starters, ci flanged type column pipe, foot valve and electrical equipments at swtp gobindopur under dws sub-division, kailashahar 2nd call

Central Government/Public Sector

TRN :35352577 | 03 Oct, 2025

Tender Value : 0

Dibrugarh - Assam

Tender for gem bids for boq, alu cable lugs 10 sqmm isi marked alu cable lugs 120sqmm isi marked alu cable lugs 150 sqm isi marked alucable lugs 16 sqmm isi marked alu cable lugs 25 sqmmisi marked alu cable lugs 35 sqmm isi marked alu cablelugs 400 sqmm isi marked alu cable lugs 50 sqmm isimarked alu cable lugs 70 sqmm isi marked alu cablelugs 95 sqmm isi marked altoch chlorine oblique highstrength calcium hypochloride granules bell push switch 5amps piano type make- havells anchor cona cable 6sqmm pvc unarmoured copper conductor s oblique cmake- havells finolex polycab kei cable pvc flexible3core 2 point 5 sqmm make- havells finolex polycab kei cable pvc unarmoured 1 point 5 sqmm copper conductor soblique c make- havells finolex polycab kei cable pvcunarmoured 2 point 5 sqmm copper conductor s oblique cmake- havells finolex polycab kei cable pvcunarmoured 4 sqmm copper conductor s oblique c make-havells finolex polycab kei cable twin core pvcunarmoured aluminium conductor 10 sqmm make- havellsfinolex polycab kei cable twin core pvc unarmouredaluminium conductor 6 sqmm make- havells finolexpolycab kei call bell ding dong make- havells anchorcona capacitor 2 point 5 mfd make- anchor tubcohavells capacitor 3 mfd make- anchor tubco havells capacitor 4 mfd make- anchor tubco havells capacitor45 plus minus 6 mfd running make- anchor tubco havells capacitor 80 or 100 mfd running make- anchor tubcohavells change over switch 100 amp onload 4 poleopen exec make- legrand havells abb change overswitch 63 amp onload 4 pole open exec make- legrandhavells abb change over switch onload 200 amp 4 poleopen exec make- legrand havells abb change overswitch onload 400 amp 4 pole open exec make- legrand bid number gem2025b6652544 dated 12-09-2025 bid document1 65 1 1 havells, abb, gate valve 25mm make- prayag, jainko, prima, gate valve 50mm make- prayag, jainko, prima, gibend 25mm isi marked, gi bend 50mm isi marked, gielbow 20mm isi marked, gi elbow 25mm isi marked, giend plug 20mm isi marked, gi end plug 25mm isi marked, gi end plug 50mm isi marked, gi nipple 3inch long 20mmisi marked, gi nipple 3inch long 25mm isi marked, gireducer 25 oblique 20mm isi marked, gi reducer 50oblique 20mm isi marked, gi reducer 50x25mm isi marked, gi socket 20mm isi marked, gi socket 25mm isi marked, gi socket 50mm isi marked, gi tee 20mm isi marked, gitee 25mm isi marked, gi tee 50mm isi marked, gi union20mm isi marked, gi union 25mm isi marked, gi union50mm isi marked, ht insulation tape make. anchor, havells, kinjal, lamp holder 5 amps batten type make-havells, anchor, cona, led bulb 12 watts make- wipro, crompton, orient, led bulb 15 watts make- wipro, crompton, orient, led bulb 5 watts make- wipro, crompton, orient, led bulb 7 watts make- wipro, crompton, orient, led bulb 9 watts make- wipro, crompton, orient, led bulkhead light fitting 10 wattmake- wipro, crompton, orient, led flood light fitting 150watt make- wipro, crompton, orient, led post top lantern25 watt make- wipro, crompton, orient, led post toplantern 35 watt make- wipro, crompton, orient, ledrecessed light fitting 15 watts circular or square make-wipro, crompton, orient, led recessed light fitting 36 or40 watts 2x2feet make- wipro, crompton, orient, ledrecessed light fitting 6 watts circular or square make-wipro, crompton, orient, led street light fittings 100 or120watt make- wipro, crompton, orient, led street lightfittings 60 or 70 watt make- wipro, crompton, orient, ledstreet light fittings 35 watt make- wipro, crompton, orient, led street light fittings 45 watt make- wipro, crompton, surya, led tube light 10 or 12 watts 2feet with fittingmake- wipro, crompton, orient, led tube light 18 or 20watts 4feet with fitting make- wipro, crompton, orient, lttape insulation 20 or 25 mm roll of 25 mtr make- anchor, havells, kinjal, mcb sp 16 amps make- legrand, havells, abb, mcb sp 20 amps make- legrand, havells, abb, mcbsp 25 amps make- legrand, havells, abb, mcb sp 32 ampsmake- legrand, havells, abb, mcb spn 20 amps make-legrand, havells, abb, mcb spn 32 amps make- legrand, havells, abb, mccb 125 amps 415 volt 4 pole 25 ka fixedtype make- legrand, havells, abb, mccb 160 amps 415volt 4 pole 25 or 36 ka fixed type make- legrand, havells, abb, mccb 200 amps 415 volt 4 pole 25 or 36 ka fixedtype make- legrand, havells, abb, mccb 250 amps 415volt 4 pole 35 ka fixed type make- legrand, havells, abb, mccb 400 amps 415 volt 4 pole 50 ka fixed type make-legrand, havells, abb, mccb 63 amps 415 volt 4 pole 25ka fixed type make- legrand, havells, abb, metal plug 3pin, 20 amps make- legrand, havells, abb, modular fanregulator make- legrand, havells, abb, modular socket 15amp make- legrand, havells, abb, modular socket 5 ampmake- legrand, havells, abb, modular switch 15 amp make-legrand, havells, abb, modular switch 5 amp make-legrand, havells, abb, piano switch 5 amp make- legrand, havells, abb, piano switch 5 amp two way make- legrand, havells, abb, plug top 16 amp make- legrand, havells, abb, pvc casing capping 20 x 12 mm 3 mtr long make-presto plast, finolex, prince, pvc casing capping 25 x 12mm 3 mtr long make- presto plast, finolex, prince, pvccasing capping 32 x 12 mm 3 mtr long make- presto plast, //bid details2 / 65 finolex, prince, pvc conduit 20 or 25mm 3 mtr long make-presto plast, finolex, prince, regulator electronic type forcelling fan make- legrand, havells, abb, socket 6 amp 5pin make- havells, anchor, cona, switch socketcombination 16 amp make- havells, anchor, cona, switchsocket combination 6 amp 5 pin make- havells, anchor, cona, switch socket combined 5 oblique 15 amp with boxmake- havells, anchor, cona, molded case circuit breakersmccb as per is / iec 60947 q3, mcb - miniature circuit -breakers for a.c. operation as per is / iec 60898 part 1q2, led luminaire for floodlight v2 conforming to is10322 part 5/section 5 q3

Central Government/Public Sector

TRN :35324808 | 29 Sep, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for general, tiles 300x300mm tiles 600x600mm tiles anti skid600x600mm inter locking tiles coloured pcc 60 mm thick hollow block 400mmx200mx200mm cement opc 43grade pbs roll 1 mtr and 20 mtr long water prooftarpaulin polythene 30x30 ft acrylic sheet 6x4 ft x 4mm paint black paint white paint og paint red paint yellow paint green paint red oxide paint brush 1 inch paintbrush 2 inch paint brush 3 inch paint brush 4 inch paintbrush 6 inch pvc door pvc door for toilet pvc doortoilet size 700x2000mm pvc door 700x1850mm thinner tower bolt 8 inch pp nylone rope 12mm 100 mtr long plywood 8x4 ft 6mm thick plywood 8x4 ft 12mm thick pag hood steel cgi sheet 810x2410 mm long 0 point 63mm thick ft cgi sheet 810x3050 mm long 10 ft led tubelight fitting 1x 18 or 22 w 4 ft led tube light 20 w 4 ftlong led tube light fitting 1 x 18 or 22 w 4 ft loong warm led tube light fitting 1 x18w 4 ft long complete with allaccessories including led tube rod led bulb 5 w ledbulb 9 w led bulb 9 w warm led bulb 12w led bulb18w led security light 20 watt led security light 50watt mirror led light 10 w led light 150 watt wirelesselectric bell flexible wire pvc insulated twin core of size 23or 0 point 0076 with copper conductor confirming torelevant is pvc insulated cable 1 sqmm single corecopper conductor pvc insulated cable 1 point 5 sqmmsingle core copper conductor pvc insulated cable 1 point5 sqmm 2 core copper conductor cable pvc insulatedunsheathed single core flexible copper conductor 1100vgrade of size 2 point 5 sqmm cable pvc insulatedunsheathed twin core flexible copper conductor 1100vgrade of size 2 point 5 sqmm pvc insulated service cablealuminium conductor 70 sqmm 4 core pvc switch bd 4x4inch pvc switch bd 6x4 inch pvc switch bd 7x4inch pvc bid number gem2025b6658787 dated 09-09-2025 bid document1 95 0 0 sitch bd 6x8 inch, pvc switch bd 8x10 inch, switch board, switch socket 5 amp, switch 5 amp, switch 15 amp withbox, switch 15 amp, socket 5 amp, socket 15 amp, switch socket combination 3 or 5 pin amp, switch socketcombination 5 or 3 pin 15 or 16 amp, socket 3 pin 15 or 16amps, modular switch socket combination 3 or 5 pin 16amp with box, modular socket 6 amp 2 or 3 pin combinedtwo module, modular socket 3 pin 10 amp, modular socket3 pin 20 amp, modular switch 3 pin 10 amp, modularswitch 3 pin 20 amp, plug 3 pin 5 or 6 amp, plug 3 pin 15amp top, pvc insulation tape 2 cm wide 10 mtr long, mcb6 amp sp, mcb 6 amp 240 v, mcb 20 amp 240 v, mcb 10amp sp, mcb 16 amps sp with box, mcb 20 amp sp, mcb32 amp sp with box, mcb 40 amp sp, mcb 32 amp dp, mcb 63 amp dp 240 v, isolator 40 amp dp 240 v, mcbbox metal, mcb ditribution boards in sheet metal enclosure4 ways double door with blanks confirming to is 8623, mcbdistribution bd sheet metal 8 way, mcb distribution bdsheet metal 10 way, mcb single pole 230 v ac 50 hz 16amps 10 ka confirming to relevant is suitable for lightingother domestic loads, pvc exhaust fan 250mm sweep, pvc exhaust fan 300mm iron, pvc exhaust fan 400mm, pvc exhaust fan 450mm, bed switch on off, piano switch5 amp, piano switch 15 amp, piano switch modular 10amp, piano switch modular 20 amp, white cover plate withframe 2 module, white cover plate with frame 3 module, casing caping 3 oblique 4 inch length 6 ft, pendent holder, angle holder with skirt, angle holder, button holder, change over switch 32 amp 2 pole, pvc ceiling rose 2oblique 3 terminal, ppr pipe 15 mm dea 6 mtr long, pprpipe 20mm 3 mtr long, ppr pipe 25 mm dia 3 mtr long, ppr pipe 3 layer dia 32 mm 3 mtr long, ppr pipe 3 layer dia40 mm 3 mtr long, ppr socket 40mm, ppr tee 40mm, ppr elbow 40mm, pvc elbow 15mm, pvc elbow 20mm, pvc socket 15mm, pvc socket 20mm, pvc union 15mm, pvc union 20mm, pvc socket reducer 20 or 15mm, pvcsocket reducer 20 or 25mm, towel rail cp 750mm long, toilet seat ws, syntex 1000 ltr, hdpe tank 200 ltr, hdpetank 500 ltr, water storage tank double layer 500 ltr, water storage tank double layer 1000 ltr, bib cock brass 15mm, bib cock steel 15 mm, pvc bib cock 15 mm, ptmtpiller cock 15mm, cp pillar cock 15mm, stop cock brass15mm, stop cock brass 20mm, stop cock brass 2mm, mseal 100 g each pkt, snow whit colour european wc with sor p trap concealed of size 650x405x770m with sheet cover, wc india type, wash basin, waste pipe for wash basin, vitreous china wash hand basin whb white flate back5050x400mm including coupling of ptmt 15mm deai450mm long pvc connection, whb steel, vitreous chinaurinal pot, stainless steel sink, gun metal gate valve40mm, loking mirror cum cabinet 450mm x 300mm, loking mirror cum cabinet 450mmx 1800mm, loking mirrorcum cabinet 600mmx 450mm, hdpe jerricane 20 ltrs, fireextinguisher 2 kg, laip 6 ft, saip 2 ft

State Government

TRN :35299772 | 29 Sep, 2025

Tender Value : 0

Koraput - Orissa

Tender for gem bids for bricks, cement, construction sand, tin sheet, interiordoor 1, interior door 2, main door, interior door 3, interior door 4, door frame 1, door frame 2, main doorframe, door frame 3, door frame 4, door latches, doorhinges, hinge screws, door installation, wall tiles, tilecleaner, floor tiles, tile grout, tile dismantling service, tile installation service, tile grouting service, fancapacitors, threading screws 1 inch, electrical casingboxes, plastic cable grips 38mm, pvc insulation tape, pvc nail clamps 6mm, electric wire 1.0sqmm, angleholders, led tube lights 20w, pvc casing 20mm, 4-wayswitch boards, 6a switches, 6a sockets, cable 1.5mm, cable 0.75mm, pvc tape, 40mm wall plugs, trunking30x15mm, plastic c clips 4mm, nail clips 20mm, surfaceboards 4-way, 1-way switch 6a, 3-pin socket 6a, flushmetal box, electrical wiring service, switch n socketinstallation, light fitting service, ladies urinal, odishapan 23 inch, s-type commode, bib cock 2-way, shortbody tap, long body tap, cpvc push fitting, angle cock, shower head, toilet seat cover, wash basin, wastecoupling, waste pipe, health faucet, pillar cock, threadseal tape, cpvc nail clamps 3 by 4 inch, connection pipe, 1.5 inch patch fitting, 1.5 inch wall plate, basin nut bolt, cpvc reducer 3 by 4 inchx1 by 2 inch mta, cpvc reducer3 by 4 inchx1 by 2 inch fta, cpvc plain elbow 3 by 4 inch, cpvc plain tee 3 by 4 inch, cpvc brass elbow 3 by 4 inch, cpvc brass tee 3 by 4 inch, cpvc socket 3 by 4 inch, cpvc bush 3 by 4 inch, cpvc solvent 100ml, upvc plainelbow 3 by 4 inch, upvc socket 3 by 4 inch, ball cock25mm, upvc solvent 100ml, upvc pipe 1.5 inch, upvcbrass fta 1.5 inch, upvc brass mta 1.5 inch, upvc ballvalve 1.5 inch, upvc union 1.5 inch, pvc door tee 110mm, pvc air call 110mm, pvc plain tee 110mm, pvc 45degree bend 110mm, pvc door tee 75mm, pvc plainelbow 75mm, pvc door elbow 75mm, pvc 45 degree bend75mm, pvc plain tee 75mm, pvc pipe 50mm, pvc 45degree bend 50mm, pvc elbow 50mm, pvc tee 50mm, pvc floor trap 75mm, pvc pipe 75mm, pvc air call 75mm, upvc plain elbow 1 inch, upvc brass mta 1 inch, upvcbrass fta 1 inch, tank connector 1 inch, cpvc bush 1 inch, cpvc elbow 1 inch, cpvc plain fta 1 inch, cpvc pipe 1inch, 2 inch pvc mta, 2x1 bush, 1x3 gi rs, gents urinal, 63x50mm rs, 3 by 4 cpvc pipe, 1 inch cpvc, 4 inch ssjubbli clamp, white cement, 4 inch pvc pipe, 50mm pvcpipe, syntax box, mirror, 1.2 inch ss nails, 1.5 inch upvcpipe, plug, 1.5 inch cpvc fta, 1.5 inch pvc elbow, 1.2inchx1 bush, 1 inch pvc fta, west pipe, 1x3 by 4 upvcbush, 1 by 2 inch gi short piece 6 inch, 1 by 2 inch gisocket, 1 by 2 inch gi elbow, thread seal, 3 by 4 cpvcpipe, 3 by 4 plain elbow, 3 by 4 plain tee, 3 by 4 brasstee, 3 by 4 brass elbow, 3 by 4 conceal, 3 by 4 nailclamp, c pvc solvent 100 ml, 3 by 4 ball valve, 3 by 4cpvc brush, 3 by 4 upvc socket, 12 by 12 nepin, 75mmpvc pipe, 75mm pvc tee, 75mm elbow, pvc solvent 200ml, plumbing dismantling, water supply line installation, drainage line installation, sanitaryware installation, tapand faucet installation, general labor charges, sitecleaning and debris removal

Central Government/Public Sector

TRN :35281512 | 23 Sep, 2025

Tender Value : 0

Medinipur - West Bengal

Tender for gem bids for refrigerant gas r 407, refrigretor gas r 22 make mafrom, mansoon wrapping tape 48mm width for ac, magneticcontactor relay, refrigerent gas for ac plant r 32, rotarycompressor 2 tr r 22, reciprocating compressor 2 tr r 22, reciprocating compressor 1 point 5 tr r22 as per sample, compressor inverter type 2 tr as per sample, compressorinverter type 1 point 5 tr as per sample, compressor rotary2 tr r 32 as per sample, copper pipe 1 bye 4 inch length15 mtr, pcb for inventor ac as per sample, rotarycompressor 1 point 5 tr r22 as per sample, outdoor motoras per sample, copper pipe 1 bye 2 inch length 15 mtr, acindoor motor as per sample, copper pipe 5 bye 8 length 15mtr, copper pipe 3 bye 8 inch length 15 mtr, capacitor 45plus 6 mfd metal body, non return valve for ac andrefrigerating system, motor indoor split ac as per sample, capacitor 50 mfd metal body, condenser for split ac 22 x32, condenser for split ac 20 x 30, foam insulation rubbertype 5 bye 8, capacitor 36 mfd metal body, capacitor 50plus 4 mfd metal body, motor ourdoor split ac as persample, casing capping size 25mm.32 mm, capacitor 60plus 6 mfd metal body, capacitor 45 mfd metal body, longscrew 40mm x 150 mm, capacitor 55 plus 4 mfd metalbody, brazing stick, capillary 74 for ac, capacitor 70 mfdmetal body, metal plug top 20a 240v 2p plus e, pvc u clip10mm, copper pipe 3 bye 16 inch length mtr, drain pipenon lock type, dead nut copper, drain pipe lock type, screw 1 point 5 inch, screw 1 inch, capacitor 15 mfdsquare type, fastener 2 inches, refrigernt gas r134, r410, apperature plate for geyser 50 ltr capacity, solarwater heater element 2kw for 100 bye 200 lpq, wire meshstainless steel of size 1 point 2x15 mtr with 0 point 56mm x1 point 18mm, cushion cover made out of superior qualitytapestry cloth rate not less rs 350, wheel base forrevolving chairs, door seal with aluminium frame 3 feetlong, beading teak 20 mm, beeding pvc 25 mm, fevicolsr bye sh, hydraulic system for revolving chairs, bracketfor pvc l bye l flushing cistern, french polish makeshalimar, screw 15mm 100 nos in each pkt, telescopicchannel for table computer keyboard 12 inches, telescopicchannel for table computer drawers 16 inches, ms bracketfor curtain rod 19 bye 20mm and 1 mm thick, woodenbeading teak wood 25 mmx 25 mm, wood french polish, beading pvc 20mm, beading pvc 25mm, back frame chaircb steel with arms, pvc bullets 50mm contains in 300 nosin each pkt, pvc bullets 35mm contains in 300 nos in eachpkt, washer for pvc l bye l flushing cistern, screw fullthread 35 mm, screw full thread 25 mm, cap hook brass100 mm, screw wood ss 35mm, screw wood ss 40mm, window wire mesh nut and bolt, wood primer berger, gilong screw 20 mm x 75 mm, rubber washer for syphone

Related Searched Keywords : valve casing

List of valve-casing Tenders

Tender for supplying and installation of axially split casing type centrifugal pump set, sluice valves, starters, ci flanged type column pipe, foot valve and electrical equipments at swtp gobindopur under dws sub-division, kailashahar 2nd call

Get valve casing Tender Alert...

Related Searched Keywords : valve casing

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us