Filters

List of u-bend Tenders

List of latest u-bend Tenders in Indian Tenders. Click on any u-bend Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for u-bend Tenders.

All-Tenders (169)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49029514 | 16 May, 2025

Tender Value : 54.50 Lacs

Jhansi - Uttar Pradesh

Tender for tender for work of installing tin shed in narsingh bhagwan temple premises in nagar panchayat katera - excavation in soil mixed with moorum/ shingle/ kankar requiring the use of special t&p such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. s.i no - 252.ch.4 2 cement concrete with 4cmgauge approved stone ballast, approved coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.pcc si no.281.ch-5. 3 r.c.c work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in footing excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 b w.g.g.i. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & t&p etc required for proper completion of the work. binding wire cost being included in the item 287 -1st.ch-5. 4 rcc work with cement approved coarse sand, and 2cm (3/4) gauge, approved stone ballast in the proportion 1:1.5:3 in column, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.i. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.si no.288-1st.ch-5. 5 brick work with non modular fly ash lime bricks (falg bricks) conforming to is:12894, class designation 10 average compressive strength in foundation cement mortar 1:6 (1 cement : 6 coarse sand) as per sor s.i. no. dsr 6.34.ch-6. 6 r.c.c work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beam/lighter beam excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 b w.g.g.i. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & t&p etc required for proper completion of the work. binding wire cost being included in the item no-285 1st.ch-5. 7 brick work with non modular fly ash lime bricks (falg bricks) conforming to is:12894, class designation 10 average compressive strength in super structure cement mortar 1:4 (1 cement : 4 coarse sand) as per sor s.i. no. dsr 6.34.ch-6. 8 earth work in cutting or in filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20) in depth and earthwork in embankment to be in 20 cm(8) layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100) lead. the earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by engineer-in-charge. s.i. no.253.ch-4. 9 mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.si. no. 504 10 15 mm thick plaster on rough side brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.si no.17.59(3) 11 providing and applying plaster of paris putty of 2 mm thickness over plasterod surfaco to prepare the surface even and smooth complete. s.i. no. new item ref. dar-13.26. ch.-15. 12 finishing walls with water proof cement paint of approved makeand quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.si no.660+661 13 kota stone slab 20 mm thick in kitchen slab over 20 mm thick base of 1:4 cement morter laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab s.i no 14.43 (a), ch-14. 14 for teen shed and godown-

Boards / Undertakings / PSU

TRN :48996540 | 13 May, 2025

Tender Value : 1.47 Crore

Matunga - Maharashtra

Tender for repair, renovation, and reconfiguration of lab 1 at the computer engineering and it engineering department, first floor, vjti, matunga, mumbai.= 1 dismantling of existing partitions, wall paneling, etc., all complete as per site requirements, and stacking the usable materials within building premises as directed by the architect/consultant/ engineer-in- charge, etc. complete. (lead upto 100 meters) 2 removal of cement tiles, existing flooring, wall tiles,marble, polished shahabad flooring, dado with or without bed concrete, including stacking the materials as directed, with all leads, lifts, etc., complete. (lead upto 100 meters) 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. ( lead upto 100 meters) 4 scraping the old paint from the plastered internal surface using a dust-free vacuum paint scraper, followed by coating the entire surface with a mixture of whiting or glue and linseed oil, including the provision of scaffolding, as directed. (the scraping of old paint should be done until the neeru finish of the plaster is achieved.) lead and lift upto 100 meters etc. complete. 5 removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. 6 removing the existing cement plaster of any thickness without causing dust nuisance, stacking the debris up to a distance of 100 meters, cleaning the site, etc. complete. 7 providing and applying an anti-corrosive chemical to exposed reinforcement of r.c.c. members such as beams, columns, and slabs. this includes one coat of alkaline rust converter (feovert, rusticide, or equivalent) after cleaning the surface with a wire brush, followed by two coats of anti-corrosive, epoxy-based, two-component, zinc-rich primer (materemaco p 130 of basf, phenolic ipnet rb, polyalk flxoprime, or equivalent) for rebar protection on exposed reinforcement. additionally, apply a concrete-penetrating corrosive inhibitor (epco kp-100, polalk ep 113, masterseal 1414 of basf, fosroc, or equivalent) over the adjoining concrete surface. etc. complete. 8 providing and applying a bond coat of approved epoxy resin (masterbrace 1414 of basf, epi bond of krishna conchem, or equivalent) before polymer plaster or concrete to ensure a perfect bond between old concrete and new concrete/polymer plaster surfaces. the bond coat should be applied within half an hour after preparation, conforming to astm c881 type 2. this process includes the use of nylon brushes, scaffolding, labor, etc. complete. 9 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 15mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 10 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 30mm-50mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 11 providing and applying a 30mm thick self-curing ceramic polymer microconcrete of an approved make, having a compressive strength above m30, non-shrink, and impermeable, as a filling mortar for load-carrying r.c.c. members in two layers on cleaned concrete surfaces, including honeycomb areas (using manual or mechanical means). the mortar shall be prepared by mixing nicosil c80 and fresh 53-grade cement with the required water-cement ratio to achieve the desired consistency. the application and finishing shall be done by manual trowelling. curing shall be carried out after the initial setting time, in accordance with the manufacturers specifications. the work shall be executed in line with the specifications and as directed by the engineer-in-charge. the work must be carried out by a certified applicator, and the work shall be guaranteed for 5 years. the guarantee shall be provided on a rs. 500/- stamp paper. (the bond coat, as per item no. 08 in the boq, is to be applied before the coating.) 12 providing and applying 12mm thick internal/external ready-mix plaster conforming to is: 4031 (part-4) 1988 and is: 383-1970, in a single coat using cement mortar in a proportion of 1:4, with a special type of polymer additive (approximately 0.4%), on all types of surfaces in all positions, including scaffolding and curing. the plaster shall be followed by a smooth finishing coat of gypsum plaster of 6mm thickness, ensuring an even, smooth surface suitable for painting. complete with necessary curing, scaffolding, and all other related works. 13 providing and applying a priming coat over new/old steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter. the surface shall be scoured with wire brushes, fine steel wool, scrapers, and sandpaper, with scaffolding as required, etc. complete. 14 providing and applying priming coat over new wood and wood-based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter, sanding, knotting, scaffolding, etc., complete. (brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 15 providing and applying two coats of synthetic enamel paint of approved color to new/old structural steel work and woodwork in buildings, including scaffolding if necessary, cleaning, and preparing the surface (excluding primer coat). etc. complete.(brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 16 removing and refixingof doors and windows with frames and stacking the materials as directed, including all leads, lifts, labour, fitting etc., complete. (lead up to 100 meters) 17 providing and laying in pattern 600 mm x 600 mm vitrified tile flooring of 8 to 10 mm thickness and confirming to is 15622-2006 ( group bla) of approved make,quality, shade and pattern for flooring . the tile flooring shall be laid in pattern with 2 mm spacers & tiles fixed in cement mortar of 1:4. the rate shall be including floor chipping to attaining required levels, epoxy grouting of joints using approved matching colour tile grout of epoxy grout, necessary protection of the laid floor, acid wash cleaning for any stains before handover. etc. complete as per the drawing, specification and to complete satisfaction of the engineer. rate to include the wastages as per the pattern indicated in the layouts. brands like kajaria, johnson or similar etc. groove shall be filled with grout of approved shade ( brands like laticrete etc.) as dicectedby the engineer-in-charge. etc. complete. basic rate for tile material- rs. 1440/- per sq.m. 18 providing and fixing skirting, including labor, materials, and all related work, etc., complete. rate for skirting of height up to 150 mm. 19 vinyl flooring for hod cabin:providing and fixing approved color homogeneous flooring, 4mm thick with interlocking system, single-layered flexible spc vinyl flooring (spica by tusker vinyl floorings) in roll form, over the provided i.p.s. or kota stone flooring. the flooring will be fixed using approved adhesive, and all joints will be soldered with pvc rods as per the manufacturer’s specifications. the work will be completed as directed, ensuring proper leveling and cleaning. the roll width will be a minimum of 2.0 meters, and the weight of the pvc flooring will be 90 kg per 30 sqm. as directed and approved by engineer in charge. etc complete. basic rate for vinayl flooring material- rs. 900/- per sq.m. 20 providing and laying vitrified mirror/glossy/matte finish tiles of size 590 mm to 605 mm x 590 mm to 605 mm with a thickness of 8 to 10 mm, conforming to is 15622:2006 (group b1a) from an approved make, shade, and pattern, for dado and skirting in the required positions. the tiles shall be fixed in 1:4 cement mortar, including neat cement float, filling of joints, curing, cleaning, and all related work, etc., complete. basic rate for tile material- rs. 790/- per sq.m. 21 providing second-class burnt brick masonry with conventional/i.s. type bricks in cement mortar 1:6 in the superstructure, including striking joints, raking out joints, watering, scaffolding, and all related work, etc., complete. 22 lowering the debris obtained from breaking and removing cement plaster/burnt brick masonry from the first floor by any means, without causing dust nuisance or damage to the structure. the debris shall be stacked as directed by the engineer-in-charge, including cleaning the site, etc., complete. (lead up to 100 meters.) 23 removing and disposing of debris from the site to a dumping ground outside the vjti premises (in accordance with municipal rules), etc. complete. as directed by the engineer-in-charge. (minimum 6 cu.m debris per trip) 24 providing anti-termite treatment to the wooden frames of doors and windows of the existing building as per i.s. 6313 (part-iii), by drilling 6 mm dia. holes at the four corners on one side and the four corners on the other side, at a downward angle of approximately 45 degrees at the junction of the woodwork and masonry. injecting 150 ml of chlorodane 5% w.c. into each hole and sealing with putty, etc., complete, with a 2-year guarantee on bond paper. 25 providing and applying waterproof melamine polish of the required finish to the woodwork by spray machine, including knotting and preparing an even surface by scraping, applying french polish, scaffolding if required, etc., complete.note: the work is to be executed only with prior approval from the superintending engineer. (brands such as asian paints, mrf melamine or equivalent.) etc. complete. 26 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 8 mm to 12 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 27 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 16 mm to 32 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 28 providing and fixing sign boards foor doors:specification for waterproof signage boards (12 x 4 inch)size: 12 inches (l) x 4 inches (h) (with size tolerance is plus or minus 1%)material: high-quality, durable acrylic or pvc boardfinish: glossy or matte finish for clear readabilitywaterproof: weather-resistant, suitable for both indoor and outdoor usedesign: custom text, graphics, or logo engraving/printingmounting: wall-mountable with adhesive backing or screw mountscolors: available in multiple colors with contrast for visibility (e.g., white, black, silver)application: ideal for office cabins, rooms, labs, and other signage needsthis durable, waterproof signboard ensures clear and professional signage in various environments. including wastage, etc. complete. basic rate for material- rs. 460/- per number. 29 providing and fixing of 3d wall panels that can be painted as well.size of each panel: 2 x 2 feet.colour: any color, design, or pattern.features: lightweight, fire-resistant, easily diy, 100% recycled.made from natural bamboo plant fiber, etc., complete. basic rate for material- rs. 450/- per number. 30 providing and fixing wooden decorative fluted wall panels/louvered wall panels:material: high-quality wood (mdf, plywood, or hardwood) with a decorative veneer finish.dimensions: 8 feet x 4-5 inchesthickness: 8 mm - 12 mmdesign: fluted design with vertical or horizontal grooves for a decorative effect.color: multicolor/any colour. (customizable to match interior themes).shape: rectangular panels for seamless installation, etc., complete. basic rate for material- rs. 850/- per number. 31 providing and fixing machine cut mirror polished 16 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone partition with rounding the edges etc. complete. one side polishbasic rate for granite material- rs. 2530/- per sq.m. 32 providing and fixing oval-type under-counter wash hand basin of 16-inch x 22-inch size and of special color shade, having telephonic black/colored granite of 180mm thick stone black kadappa framework, including chromium-plated coupling bottle trap. the wash basin should be of cera company or equivalent, model no. 3448, as per the detailed drawing or as directed by the engineer-in-charge, etc., complete. (counter size 1.20m x 0.60m). (brands such as jaquar,kohler or equivalent make.) basic rate for wash basin - rs. 6000/- per number. 33 providing and constructing a granite kitchen platform with the installation of a stainless steel sink (600mm x 450mm) as per the detailed drawing, including vertical polished kadappa stone supports (25 to 30mm thick) on both sides, with a kadappa top (35 to 40mm thick) and a polished granite top (16 to 20mm thick). the platform will feature granite strips at the front and both sides, with two vertical granite supports (15 cm height). the top granite will be 75 cm x 40 cm, including cutting and opening for the sink of the required size in both kadappa and granite. the platform size is 5.00 m x 0.60 m, with a height of 0.75 m, etc. complete with all required finishing. basic rate for ss sink- rs. 6000/- per number. 34 supply and installation of 600x600mm modular metal perforated grid ceiling system (cg-01)the ceiling system shall be supplied and installed as per the specifications provided in the tender document, and in accordance with the directions and approval of the engineer-in-charge. the scope includes complete installation with all necessary materials, components, and finishing to ensure proper execution etc. complete. 35 providing and installation of aluminum frame works for partition with ply on both sides and laminate finish: providing and fixing partition aluminum frame work consist of 25mm x 50mm x 1.2mm thick extruded aluminium box section framework at spacing not exceeding 600mm centre to centre both ways (horizontal and vertical). the framework shall be secured at floor structural ceiling and sill/ lintel level with 25 x 50mm x 1.2mm thick horizontal aluminium section. framework to be secured to floor / walls / columns / ceiling / beams using 75mm metal screws and dowels.acoustic infill: providing & fixing acoustic insulation of approved make to g.i./ aluminum/ ms/ wooden frame partition of 50mm thick rockwool of density 48 kg/m with blanket wrapped in rp tissue suitably affixed to partition framework using where necessary gi binding wire duct tape as indicated in the drawing.outer skin:- providing and fixing 18mm plywood of brands like greenply, century or equivalent. finished with 1 mm thick laminate of approved shade applied on plywood of brands like formice, royal touche or equivalent brand.note: rate is as per aluminum framework with both side ply and laminate. etc. complete. 36 providing and fixing of laminate cladding with ply backing:providing and fixing 12mm bwr plywood (brand: greenply, century, or equivalent), directly fixed to the column. a 1mm thickness laminate of an approved shade, applied on the plywood surface. laminate brands: formica, royal touche, or equivalent. etc complete. 37 providing and installation of glass partition (toughened glass): providing 12mm toughened fixed glass partition including all patch fittings, ensuring smooth and even flush joints between glasses, fixing the same in positions to true line and level, finishing the wall joints with clear silicon sealants, cleaning the surface and ensuring that there are no scratch marks on the glass etc. complete as per drawing and specifications, glass brands should be dorma, ozone or equivalent. 38 providing and installation of glass partition (dgu glass): double-glazed unit glass with air spacer of 6 to 16mm, 95% transparency, etc. complete as per drawing and specifications, dorma or ozone or equivalent. 39 providing and installation of 12mm thick clear toughened glass door with film as required. (d2 - 0.91 x 2.10 m) specification:hardware: door to be complete with hardware to each leaf as follows: hinges: 8 nos. ss ball bearing butt hinges. door closer: concealed door closer with hold open. lock set: dead lock as approved.door handles:900mm ht. 36mm dia d type offset handle on both sides in approved powder coating. door stop: floor mounted door stopper as approved seals: drop down floor seal as approved. security system: na note: all the metal profile sections and hardware finish should match the frame. brands like dorma or ozone or equivalent. etc. complete as per drawing and specifications. 40 providing and installation of d1 - double door two-way sliding motorized door, suitable for door openings up to 1.20 meters with a maximum door weight of 100kg (both leaves). the door offers environmental protection with a working temperature range of -20°c to +50°c and is rainproof. it has a standard opening time of 3-8 seconds, with a remote control operating distance of 100 to 200 feet (depending on line of sight). the opening size is 2.4m x 2.10m, and the glass door size is 1.2m x 2.10m. brands like dorma, ozone, or equivalent, to be installed as per drawing and specifications. etc. complete. 41 providing and installation of d3 - 1.09m x 2.10m (single shutter) 12mm toughened glass door with fixed side panels, including all patch fittings, locking mechanisms, and ensuring smooth, even flush joints between the glass panels. the door is to be fixed in position to true line and level, with wall joints finished using clear silicone sealant. the surface should be cleaned and inspected to ensure there are no scratch marks on the glass. installation to be completed as per drawing and specifications, with brands like dorma, ozone, or equivalent. etc. complete. 42 pop punning: providing and applying of plaster of paris punning(1st quality isi approved pop) over plastered with minimum thickness of 8mm-12mm to existingwall surfaces, ceilings & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. rate to be inclusive of edge protection (gi), fibre mesh for service conduits,hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architects/consultant/engineer-in-charges approval. brands like gyproc, armstrong, shera or equivalent etc. complete. 43 plastic emulsion paint (leed compliant, low voc): providing and applying plastic emulsion paint finish to walls, partitions, and ceiling surfaces of approved make, color, texture, and shade in two coats, with surface and finish acceptable to the engineer in charge to be achieved within these two coats. any additional coats, if required, shall be at the contractors cost. the work includes preparing existing surfaces by scraping away loose particles, dust, etc., washing and scrubbing, filling cracks with crack filler and binder, cleaning and making the surface dust-free, applying water-based rj london putty as directed, rubbing with sandpaper to smooth the surface, and applying one coat of primer as recommended by the approved paint manufacturer. the work also includes providing necessary scaffolding, cleaning, and protecting the site until handover, as well as masking and protecting all service devices such as switchboards, detectors, etc. the work is to be completed at all heights and leads, as per specifications or as directed by the architect/engineer in charge/consultant. brands like asian paints, berger, or equivalent are acceptable. etc. complete. 44 providing and applying premium decorative wallpaper high-end or custom designs (special finishes, custom patterns)specifications: material: non-woven fabric or vinylroll size: 21 inches wide x 33 feet long (covers 55 sq ft)pattern: various styles (floral, geometric, etc.)finish: matte, gloss, or texturedinstallation: peel & stick or pastefeatures:scratch & water-resistanteasy to clean (wipeable)fade-resistanteco-friendly, voc-freeideal for: living rooms, offices, and accent wallsmaintenance: clean with a damp cloth, no harsh chemicalscustom options: available in various colors and patterns, custom designs upon request. basic rate for wallpaper rs. 600/- per sqm. 45 standing platform (300-450 mm from ffl):construction of a standing platform at a height of 300 mm to 450 mm from the finished floor level (ffl), as per approved dimensions. the platform will be made of 18 mm thick wood (century, greenlam, or equivalent) and finished with wood polish (asian paint wood tec, mrf, or equivalent).materials:frame: mild steel or aluminum, powder-coated for corrosion resistance.surface: high-quality plywood, mdf, or approved materials with a non-slip finish.support: sturdy metal beams or supports for stability.features:height: 300 mm to 450 mm from ffl, as per design.finish: non-slip surface with smooth edges and protective coating.safety: non-slip tread and optional guardrails. etc. complete. 46 stage flooring: supply and installation of interlocking rubber tile flooring at the stage area as per the specifications and drawings provided. the flooring will consist of a 6.0 mm synthetic sport surface, including a =1.50 mm pur protect® treated vinyl surface layer, calendared and grained, supported by a pvc density single closed-cell foam, and reinforced with a fiberglass grid structure. it will feature sanosol treatment for fungistatic and bacteriostatic properties. the flooring will meet the following standards: weight: 3.7 kg/m², impact resistance (en 1517) =8 n/m, abrasion resistance (en iso 5470-1) =350 mg, shock absorption (en14808) =25% (labosport result = 28%), indentation resistance (en 1516) =0.5 mm, ball bounce (en 12235) =90%, vertical deformation (en 14809) =3.5 mm, sliding coefficient (en 13036-4) 80–110, fire (en 13501-1) cfl-s1, anti-viral activity (human coronavirus 229e) – iso 21702 (99.37% after 2 hours), energy return (nf p 90 203) =0.31 m/s, tvoc after 28 days <100 micrograms/m³ (iso 16000-6), floor score®, ce marking, en14904 compliant for multi-sports use, reach compliant, and singapore green label certified. the supply and installation will include making good any damaged surfaces using standard fillers such as birla white cement, cement-based grout, epoxy grout, or mortar, and repainting to match the color.all work will be completed in accordance with the specifications, design, drawings, and the direction of the engineer-in-charge. 47 providing and fixing of overhead storage as per the specifications and drawings provided in the tender document. etc. complete. 48 providing and fixing of surface storageas per the specifications and drawings provided in the tender document. etc. complete. 49 providing and fixing on-site a lab table as per the specifications and drawings provided in the tender document. etc. complete. 50 providing and fixing of office desk/table in faculty lounge as per the specifications and drawings provided in the tender document. etc. complete. 51 providing and fixing of office desk/table in office for hod as per the specifications and drawings provided in the tender document. etc. complete. 52 supply and installation ofhod cabin chair as per the specifications and drawings provided in the tender document. etc. complete. 53 supply and installation of faculty lounge chairs as per the specifications and drawings provided in the tender document. etc. complete. 54 supply and installation of study chairs for labs as per the specifications and drawings provided in the tender document. etc. complete. 55 supply and installation of foldable desklet tables for the seminar hall as per the specifications and drawings provided in the tender document. etc. complete. 56 removingthe exisitng light fixures, fans, wires, cables, swith boards and distribution boards etc. complete. 57 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 1.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 58 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 2.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 59 supplying and erecting flush type shockproof plug socket 6a & 16a (6 pin) with 16a / 25a switch combined with indicator lamp and fuse with gang box on wooden board.make /brand (roma/ legrand,/ greatwhite) etc. complete 60 supplying and erecting isi mark modular type 3 pin 6a / 16a multi socket with safety shutter, duly erected on providedplate and box with wiring connectionsetc.complete. brand : roma/gretwhite/legrand) etc. complete 61 supplying and erecting pvc surface modular double mounting plate 3 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) 62 supplying and erecting pvc surface modular double mounting plate 4 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 63 supplying and erecting pvc surface modular double mounting plate 6 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 64 supplying and erecting pvc surface modular double mounting plate 8 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 65 supplying and erecting pvc surface modular double mounting plate 12 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 66 supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. fg-fn/cf brand /orient/polycab/crompton etc. complete 67 supplying and erecting flush-type ceiling fan regulators and electronic step regulators for ceiling fans (600mm, 900mm, 1200mm, and 1400mm sweep), complete with installation on the provided switchboard. make/brand: roma, legrand, or greatwhite. 68 providing and fixing 36 watt 2x2 light fitingsupplying and erecting square shaped crca /die-cast aluminium powder coated housing led panel light (slim edge-lit) 600x600mm suitable for 36 w-40w includingmotion sensor led light with provision for plane front frame with translucent cover fixed to the housing etc.complete .brand philips/havels/wipro etc. complete 69 supplying and erecting 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 70 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (24 poles) or tp mcb of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 71 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/tripalarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 72 supplying, erecting & commissioning 4 pole rccb 63a, electromagnetic type with 30/100/300 ma sensitivity with earth leakage trip indication complete as per specification no. sw-rccb/rccb. (make/ brand: legrand/ schneider/ l&t/ indo asian) 73 supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s/ws 113c laid in provided pvc casing capping/conduit as per specification no. wg-tw etc. complete. cables brands should be polycab/finolex/havells. etc. complete 74 supplying and installing cat-6 cable suitable for networking as per specification no. wg-coc/nc. cables brands should be polycab/finolex/havells. etc. complete. 75 supplying & erecting mains with 2 x 2.5 sq.mm. and earth wire 1.5 sq.mm frlsh pvc copper wire in hms pvc conduit min. 20mm dia. as per specification no: wg-ma/pc.etc complete. brand :polycab/finolex/havels) etc. complete 76 supplying, erecting & terminating xlpe armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.cb-lt/cu(brand: polycab/ finolex/ havells)note - the quantity of wires for looping the required number of air conditioning units has to be calculated by the contractor with respect to the provided architectural working drawing. etc. complete 77 providing & erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) gi sheet of 150 mm width & 20 mm height complete with necessary hardware. cable tray brands should be profab or equivalent. etc. complete 78 supplying and erecting pvc box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification no: wg-ma/box. etc. complete (make/ brand: legrand/ schneider/ l&t) 79 supply & fixing of aluminum box section to be laid on the floor with all excavation, re-cementing & refinishing civil works to make good in line with the existing floor level respective junctionbox to be fabricated in 16 swg gi sheet with cut out as required for terminating the box sections. shall include pvc conduits from jb to work station powerpoints i)150 x 150x 50 mmgijunction box with cover & cut outs etc. complete. (make/ brand: legrand/ schneider/ l&t) 80 supply of a.c split unit (2 ton) :supply of ac split unit as per the specifications, and drawings provided in tender document. make (carrier/ voltas/ bluestar/ samsung) etc. complete 81 supply of 2 ton casatte ac:2 ton inverter casette ac. cooling capacity 3200-8000 watt. offers uniform 360 degree round airflow, with 4 star energy rating. etc. complete. make (carrier/ voltas/ bluestar/ samsung) etc. complete 82 installation of 2 ton ac split unit etc. complete 83 installation of 2 ton ac cassette unit etc. complete 84 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 22mm complete. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 85 supply & installation electrical communication cable between indoor to outdoor units.cables brands should be polycab/finolex/havells. etc. complete. 86 providing and fixing in position ms frame stand for a.c. units, floor or wall mounted, with vibration isolation pads and frame to be made out of required ms sections strong enough to hold the weight of the ac unit,and should be lockable, including fixing in position using necessary scaffolding, ladder etc, and painting with two or more coats ofapproved enamel paint on a coat of red oxide etc. complete 87 insulated condensate water drain piping constructed out of pvc / hdpe hard pipeswith 6mm thick nitride insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors fasteners and concealed in brickwork or flooring. etc. complete(make: finolex/ astral/ prince) 88 supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided pc / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/ac system. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 89 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plug top with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. etc. complete 90 carrying out core cutting of size 3 to 5 dia x 15 length in the c.c./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. etc. complete 91 supply and installation of roller blindsas per the specifications and drawings provided in the tender document. etc. complete. basic cost for blind cloth fabric material rs.900/- per sq.m. 92 carrying out test for ceramic tiles / vitrified tileswater absorption, modulus of rupture (set of 6 tiles) etc. complete. 93 carrying out test for plywood: determination of resistance to dry heat,determination of moisture content,determination of density,thickness of plywood. etc. complete. 94 carrying out test for test for glue adhesion for plywood etc. complete. 95 carrying out test for hollow / solid /aac blocksdensity test. (set of 3 blocks), compressive strength. (set of 3 blocks), water absorption test (set of 3 blocks) etc. complete. 96 providing and fixing 15 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 97 providing and fixing 20 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 98 providing and fixing 25 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 99 providing and fixing on walls/ceiling/floor 32mm dia cpvc pipe with necessary fittings, remaking good the demolished portion, etc., complete. including removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 100 providing and fixing 75 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. 101 providing and fixing 100 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 102 providing and fixing 10 cm pvc nahani trap with grating, etc., complete. (brands such as astral, finolex, prince or equivalent make.) basic rate for nahani trap is rs. 380/- 103 providing and fixing c.p. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. basic rate for pillar cock is rs. 1250/- per number 104 providing and fixing of exhaust fan 150mm crompton/havels/usha or equivalent etc. complete. basic rate for exhasut fan is rs.1000/- per number 105 providing and fixing stainless steel round napkin hanger for bathroom/towel holder for wash basin/napkin holder/bathroom (chrome) b. heavymaterial stainless steel product dimensions 17l x 5w x 19h centimetersfinish type chromeinstallation type wall-mounted shape round including fitting etc. completed.basic rate for material is rs. 320/- 106 providing and fixing premium front glass shelf - bathroom shelf/kitchen shelves wall mounted with frosted and toughen (tradition 6 x 18) chrome including fitting etc. complete. basic rate for material is rs. 650/- 107 providing and installation of 6 mm thick mirror with 6 mm thick ply backing, as per design. the mirror will be supported by stainless steel finished buttons, etc., complete. (the glass brand should be saint-gobain, borosil, or an equivalent make) basic rate for mirror is rs. 1250/- per sq.m. 108 supply and installation of nsd make smoke detectormodel:66a, certification: ce & ertl etc. complete. 109 supply and installation of nsd make heat detectormodel:66h, certification: ce & ertl etc. complete. 110 supply and installation of response indicator make: nsdmodel: p.s (mini) etc. complete. 111 supply and installation of manual call point (m.s) make nsd 112 supply and installation of 08 zone fire alarm panel make nsd(excel) etc. complete. 113 supply and installation of flasher hooter make nsdmodel no: ms17flash etc. complete. 114 supply and installation of supply & laying 1.0 sq. mm x 2 core copper armored isi cable for alarmsystem. with accessories per meter. brand/make :polycab/finolex/havellls) etc. complete. 115 supply and installation of high quality co2 fire extinguisher (6 kg)type:carbon dioxide (co2) fire extinguisher (for electrical fires and flammable liquids)capacity: 6 kgfire rating: class b (flammable liquids) class c (electrical fires)material: cylinder: steel or aluminum alloyfinish: red powder-coated for durabilityoperating pressure: 55 bardischarge time: approx. 8-10 secondsdischarge range: 3-5 feettemperature range:operating: -10°c to +60°c storage: -30°c to +60°cmounting: includes wall bracket certification: is 15683 (india) / ul/ce certified etc. complete.note: the rates for all fire safety alarm items include the complete supply, installation, commissioning, transportation, freight, and all associated costs. 116 providing architectural/ interior design services : scope of work as below:drawings preparation: 3d views, floor plans, furniture layout, electrical layout, ceiling layout, and partition layout.color scheme & material selection: guidance on colors and material choices for finishes, flooring, and furniture.quality control: ensure standards for structural, civil, electrical, fire safety, furniture work and hvac work.interior planning: optimize lab functionality and aesthetics, including furniture, partition design, and system planning (electrical, hvac, fire safety).modifications: suggest changes to designs based on site conditions and client feedback.coordination & monitoring: ensure project progress and timely completion by working closely with contractors. deputation of interior designer degree/diploma/certificate course having knowledge of autocad and 3d home or equivalent for the full period of the work. designes. monitor on-site execution, ensuring design adherence. taking joint measurements.preparing statements for extra items and excess quantities.compliance & safety: ensure adherence to safety codes and regulations. etc. complete.

Central Government/Public Sector

TRN :34439344 | 16 May, 2025

Tender Value : 0

Jhabua - Madhya Pradesh

Tender for gem bids for austine moore prosthesis , bipolar prosthesis , modular bipolar prosthesis , total hip replacement , 3.5 dcp for r u , one third tabular plate , locking dcp 3.5 , 3.5 cortex screw , lockinng 3.5 cortex screw , 4mm cc screw , 4mm locking screw , 4mm cancellous screw , k wires 6 inch , threads k wires , 4.5 dcp narrow , 4.8 dcp for femur , 4.5 cortex screw , 5mm lockinng cortex , malleolar screw , 6mm canu cancellous screw , 6.5mm locking cancellous , locking femur dcp , locking femur narrow , l-buttress plate , t-buttress plate , lateral tibil head buttress plates left-right , femoral condylar buttress plates cbp left-right , 3.5 mm lcdcp small , 4.5 mm lcdcp narrow , 4.5 mm lcdcp broad , dhs plate - round and dc hole 120-125-130- 135-140-145 long and short barrel , dcs 95 inch plate , tplate , clover leaf plate , y-plate , recontruction plates dc hole 3.5 and 4.5 mm , recontruction plates round hole 3.5 and 4.5 mm , distal radius plate , t-oblque plate , recon covered round hole plate 3.5 mm , herbert screw 1.5 mm headless compression screw , herbert screw 2.4 mm headless compression screw short head , 2.7 mm cortical screw , dhs nail , proximal femur plate locking , distal fmur plate liss plate l-r , 5 mm proximal lateral tibia head buttress plate l-r , medical proximal tibia head buttress plate l-r , knee bridge proximal lateral tibia plate , postereo medial tibia plate , lateral tibil head buttress plates 4.5 left-right , distal medial tibia plate , low bend distal medial tibia plate l-r , distal tibia madial head buttress plate l-r , 4mm lateral tibia head buttress plate , distal fibula plate l-r , proximal femur plate , low profile proximal humerous plate , phillos 5-4 mm proximal humerous plate , anatomical distal humurous plate , medial distal humerous plate , extra articular distal humerous plate l-r , proximal ulna plate l-r , 20-23-26 angle distal radius plate l-r , distal radius medial plate l-r , distal radius lateral plate l-r , distal radius medial t-plate l-r , distal radius lateral t-plate l-r , claviclehook plate l-r , clavicle lateral anterior plate , clavicle medial anterior plate , clavicle superior anterior plate , recon curves round plate , clacanium plate , i-l nail tibia , i-l nail femor , i-l nail humerous , proximal femour nail , trocantric femour nail , recon nail , enders nail , titanium elastic nail , square nail r-u , 4.9 mm locking bolts , 3.9 mm locking bolts , 2.9 mm locking bolts

Central Government/Public Sector

TRN :34439658 | 16 May, 2025

Tender Value : 0

Shimoga - Karnataka

Tender for gem bids for 3 by 4 inch cpvc pipe , 3 by 4 inch cpvc tee , 3 by 4inch cpvc elbow , 3 by 4 inch cpvc brass elbow , 3 by 4 inch cpvc brass tee , 3 by 4 inch cpvc brass ftr , 3 by 4 inch 1 inch cpvc reducer , cpvc 1 inch ball valve , bib cook plastic , angle cook plastic , wash basin 18 20 , wash basin piller cock , wash basin waste coupling steel , wash basin l angle , wash basin bolt nut 14 mm 3 inch , wash basin rock bolt , connecting pipe 24 inch , 2 in 1 angle cock , z gun with pipe , indian style toilet set , indian toilet long bend , flash tank , shower , shower stop cock , 3 by 4 inch clamp , black screw 2inch , steel nails 2inch , cpvc solution solvent cement100 ml , 1inch cpvc pipe , 1 inch cpvc elbow , 1 inchcpvc tee , 1 3 by 4 inch cpvc tee , 1 3 by 4 inchcpvc elbow , westrenstyle toilet , 3inchpvc pipe 1 length 20 feet , 3inchpvc elbow , 3inch pvc tee , 3inch pvc clamp , 3inch pvc collar , 2 and half inch pvc pipe 1 length 20 feet , 2 and half inchpvc elbow , 2 and half inch pvc tee , 2 and half inch pvc non drop with jali , 2 and half inch pvc clamp , 2 and half inch pvc collar , 2 and half 3inch reducer , 2 and half 4inch reducer , 4 inch pvc door elbow , 4 inch pvc tee , 4 inch elbow , 4 inch clamp , 4 inch collar , 4 inch pipe 1 length 20 feet , pvc solvent cement 100ml , sintex 1000 ltr , 1inch union cpvc , 1inch tank nipple , sintex flow top , mirror , soap dish , urinal bowl , urinal waste pipe , 3 by 4 inch clamp , axel blade

Boards / Undertakings / PSU

TRN :48869711 | 09 May, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for fittings for setting up 500 kta pdh - pp unit at usar along with propane storage at uran and associated pipeline fittings for setting up 500 kta pdh - pp unit at usar along with propane storage at uran and associated pipeline , supply of fittingsas per complete scope mentioned in material requisition no.b378-000-wd-mr-3520 in all respects: , item sl no 1 b001 elbow.90, b-16.11, astm a 105, sw, 3000 0.5 inch , item sl no 2 b001 elbow.90, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 3 b001 elbow.90, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 4 b001 elbow.90, b-16.11, astm a 105, sw, 3000, h2 1.0 inch , item sl no 5 b001 elbow.90, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 6 b001 elbow.90, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 7 b001 elbow.90, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 8 b001 elbow.90, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 9 b001 elbow.90, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 10 b001 elbow.90, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 11 b001 elbow.90, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 12 b001 elbow.90, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 13 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 14 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 15 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 16 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 17 b001 elbow.45, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 18 b001 elbow.45, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 19 b001 elbow.45, b-16.11, astm a 105, sw, 3000, ibr 1.0 inch , item sl no 20 b001 elbow.45, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 21 b001 elbow.45, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 22 b001 elbow.45, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 23 b001 elbow.45, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 24 b001 elbow.45, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 25 b001 elbow.45, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 26 b001 t.equal, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 27 b001 t.equal, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 28 b001 t.equal, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 29 b001 t.equal, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 30 b001 t.equal, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 31 b001 t.equal, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 32 b001 t.equal, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 33 b001 t.equal, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 34 b001 t.red, b-16.11, astm a 105, sw, 3000 1.0 inch, 0.75 inch , item sl no 35 b001 t.red, b-16.11, astm a 105, sw, 3000 1.5 inch, 0.75 inch , item sl no 36 b001 t.red, b-16.11, astm a 105, sw, 3000, h2 1.5 inch, 0.75 inch , item sl no 37 b001 t.red, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch, 0.75 inch , item sl no 38 b001 t.red, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch, 1.0 inch , item sl no 39 b001 t.red, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch, 0.75 inch , item sl no 40 b001 t.red, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch, 0.5 inch , item sl no 41 b001 swage.conc, bs-3799, astm a 105, pbe 0.75 inch, s160, 0.5 inch, s160 , item sl no 42 b001 swage.conc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.5 inch, s160 , item sl no 43 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 0.75 inch, s160 , item sl no 44 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.0 inch, xs , item sl no 45 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.25 inch, xs , item sl no 46 b001 swage.conc, bs-3799, astm a 105, pbe, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 47 b001 swage.conc, bs-3799, astm a 105, pbe, h2 1.5 inch, xs, 1.0 inch, xs , item sl no 48 b001 swage.conc, bs-3799, astm a 105, pbe, ibr 1.5 inch, xs, 0.75 inch, s160 , item sl no 49 b001 swage.conc, bs-3799, astm a 105, tle 0.75 inch, s160, 0.5 inch, s160 , item sl no 50 b001 swage.conc, bs-3799, astm a 105, tle, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 51 b001 swage.conc, bs-3799, astm a 105, tle, ibr 0.75 inch, s160, 0.5 inch, s160 , item sl no 52 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 0.75 inch, s160, 0.5 inch, s160 , item sl no 53 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 1.0 inch, xs, 0.75 inch, s160 , item sl no 54 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, tle, lt 0.75 inch, s160, 0.5 inch, s160 , item sl no 55 b001 swage.ecc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.5 inch, s160 , item sl no 56 b001 swage.ecc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.75 inch, s160 , item sl no 57 b001 swage.ecc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.0 inch, xs , item sl no 58 b001 swage.ecc, bs-3799, astm a 105, pbe, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 59 b001 swage.ecc, bs-3799, astm a 105, pbe, h2 1.5 inch, xs, 0.5 inch, s160 , item sl no 60 b001 swage.ecc, bs-3799, astm a 105, pbe, ibr 0.75 inch, s160, 0.5 inch, s160 , item sl no 61 b001 swage.ecc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 1.0 inch, xs, 0.75 inch, s160 , item sl no 62 b001 cap, b-16.11, astm a 105, scrf, 3000 0.5 inch , item sl no 63 b001 cap, b-16.11, astm a 105, scrf, 3000 1.0 inch , item sl no 64 b001 cap, b-16.11, astm a 105, scrf, 3000, ibr 1.5 inch , item sl no 65 b001 cap, b-16.11, astm a 105, scrf, 6000 0.5 inch , item sl no 66 b001 cap, b-16.11, astm a 105, scrf, 6000 0.75 inch , item sl no 67 b001 cap, b-16.11, astm a 105, scrf, 6000, h2 0.5 inch , item sl no 68 b001 cap, b-16.11, astm a 105, scrf, 6000, h2 0.75 inch , item sl no 69 b001 cap, b-16.11, astm a 105, scrf, 6000, ibr 0.5 inch , item sl no 70 b001 cap, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.5 inch , item sl no 71 b001 cplng.full, b-16.11, astm a 105, scrf, 6000 0.5 inch , item sl no 72 b001 cplng.full, b-16.11, astm a 105, scrf, 6000, h2 0.5 inch , item sl no 73 b001 cplng.full, b-16.11, astm a 105, scrf, 6000, ibr 0.5 inch , item sl no 74 b001 cplng.full, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 75 b001 cplng.full, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 76 b001 cplng.full, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 77 b001 cplng.full, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 78 b001 cplng.full, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 79 b001 cplng.full, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 80 b001 cplng.full, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 81 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.5 inch , item sl no 82 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.75 inch , item sl no 83 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 84 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 85 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 86 b001 cplng.half, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 87 b001 cplng.half, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 88 b001 cplng.half, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 89 b001 cplng.half, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 90 b001 cplng.half, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 91 b001 cplng.half, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 92 b001 cplng.half, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 93 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 94 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 95 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lth2 0.75 inch , item sl no 96 b001 cplng.lh, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 97 b001 cplng.lh, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 98 b001 cplng.lh, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 99 b001 cplng.lh, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 100 b001 cplng.lh, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 101 b001 cplng.lh, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 102 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 103 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 104 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 105 b001 cross, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 106 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.5 inch, s160, 80 mm , item sl no 107 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.5 inch, s160, 100 mm , item sl no 108 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.75 inch, s160, 80 mm , item sl no 109 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 1.0 inch, xs, 80 mm , item sl no 110 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 1.0 inch, xs, toe mm , item sl no 111 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, h2 1.0 inch, xs, 80 mm , item sl no 112 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, ibr 0.5 inch, s160, 100 mm , item sl no 113 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, ibr 0.75 inch, s160, 80 mm , item sl no 114 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless 0.5 inch, s160, 100 mm , item sl no 115 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless 0.75 inch, s160, 100 mm , item sl no 116 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, h2 0.5 inch, s160, 100 mm , item sl no 117 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, ibr 0.5 inch, s160, 100 mm , item sl no 118 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, ibr 0.5 inch, s160, 80 mm , item sl no 119 b002 nipple, b-36.10, astm a 333 gr.6, pbe, seamless, lt 0.5 inch, s160, 100 mm , item sl no 120 b002 nipple, b-36.10, astm a 333 gr.6, pbe, seamless, lt 0.75 inch, s160, toe mm , item sl no 121 b002 nipple, b-36.10, astm a 333 gr.6, toe, seamless, lt 0.5 inch, s160, 100 mm , item sl no 122 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs , item sl no 123 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 3.0 inch, std , item sl no 124 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 4.0 inch, std , item sl no 125 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 6.0 inch, std , item sl no 126 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 2.0 inch, xs , item sl no 127 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 2.0 inch, s160 , item sl no 128 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 3.0 inch, std , item sl no 129 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 4.0 inch, xs , item sl no 130 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 6.0 inch, std , item sl no 131 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 2.0 inch, xs , item sl no 132 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 3.0 inch, std , item sl no 133 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, xs , item sl no 134 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, std , item sl no 135 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, xs , item sl no 136 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, std , item sl no 137 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 8.0 inch, std , item sl no 138 b003 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 6.0 inch, std , item sl no 139 b003 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 8.0 inch, std , item sl no 140 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs , item sl no 141 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 3.0 inch, std , item sl no 142 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 4.0 inch, std , item sl no 143 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 6.0 inch, std , item sl no 144 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std , item sl no 145 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 6.0 inch, std , item sl no 146 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 8.0 inch, std , item sl no 147 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 2.0 inch, xs , item sl no 148 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 3.0 inch, std , item sl no 149 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, std , item sl no 150 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, xs , item sl no 151 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, std , item sl no 152 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 8.0 inch, std , item sl no 153 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 2.0 inch, xs , item sl no 154 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 3.0 inch, std , item sl no 155 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 6.0 inch, std , item sl no 156 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 8.0 inch, std , item sl no 157 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 10.0 inch, std , item sl no 158 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 12.0 inch, std , item sl no 159 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 10.0 inch, std , item sl no 160 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 12.0 inch, xs , item sl no 161 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 10.0 inch, s80 , item sl no 162 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 10.0 inch, std , item sl no 163 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 12.0 inch, s80 , item sl no 164 b004 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 10.0 inch, xs , item sl no 165 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 12.0 inch, std , item sl no 166 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 12.0 inch, xs , item sl no 167 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 12.0 inch, s80 , item sl no 168 b004 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 10.0 inch, std , item sl no 169 b004 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 12.0 inch, std , item sl no 170 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, h2 2.0 inch, xs , item sl no 171 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs , item sl no 172 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std , item sl no 173 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std , item sl no 174 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs , item sl no 175 b005 t.equal, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs , item sl no 176 b005 t.red, b-16.9, astm a 234 gr.wpb, bw 2.0 inch, xs, 1.0 inch, xs , item sl no 177 b005 t.red, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 178 b006 t.equal, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std , item sl no 179 b006 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 10.0 inch, s80 , item sl no 180 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 2.0 inch, xs, 1.5 inch, xs , item sl no 181 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std, 2.0 inch, xs , item sl no 182 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch, xs , item sl no 183 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 3.0 inch, std , item sl no 184 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 3.0 inch, std , item sl no 185 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 4.0 inch, std , item sl no 186 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 8.0 inch, std, 4.0 inch, std , item sl no 187 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 4.0 inch, xs, 3.0 inch, std , item sl no 188 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 8.0 inch, std, 4.0 inch, std , item sl no 189 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 190 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs, 2.0 inch, xs , item sl no 191 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 3.0 inch, std , item sl no 192 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 2.0 inch, xs , item sl no 193 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs, 3.0 inch, std , item sl no 194 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 6.0 inch, xs, 3.0 inch, std , item sl no 195 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, std, 6.0 inch, std , item sl no 196 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, xs, 6.0 inch, xs , item sl no 197 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, std, 4.0 inch, std , item sl no 198 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 0.75 inch, s160 , item sl no 199 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.5 inch, xs , item sl no 200 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 201 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 4.0 inch, std, 2.0 inch, xs , item sl no 202 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, std, 6.0 inch, std , item sl no 203 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std, 6.0 inch, std , item sl no 204 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 6.0 inch, std , item sl no 205 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 14.0 inch, std, 8.0 inch, std , item sl no 206 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 12.0 inch, xs, 8.0 inch, std , item sl no 207 b008 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 10.0 inch, std, 6.0 inch, std , item sl no 208 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch, xs , item sl no 209 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 4.0 inch, std , item sl no 210 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 8.0 inch, std, 4.0 inch, std , item sl no 211 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 6.0 inch, std, 4.0 inch, std , item sl no 212 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 8.0 inch, std, 6.0 inch, std , item sl no 213 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.0 inch, xs , item sl no 214 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std, 2.0 inch, xs , item sl no 215 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 2.0 inch, xs , item sl no 216 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 217 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 4.0 inch, std, 2.0 inch, xs , item sl no 218 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 6.0 inch, std, 4.0 inch, std , item sl no 219 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, std, 4.0 inch, std , item sl no 220 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, xs, 4.0 inch, std , item sl no 221 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std, 8.0 inch, std , item sl no 222 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 6.0 inch, std , item sl no 223 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 8.0 inch, std , item sl no 224 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 10.0 inch, std, 6.0 inch, std , item sl no 225 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 12.0 inch, xs, 10.0 inch, std , item sl no 226 b010 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 10.0 inch, std, 6.0 inch, std , item sl no 227 b010 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 14.0 inch, std, 10.0 inch, std , item sl no 228 b011 cap, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std, 0.75 inch , item sl no 229 b011 cap, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std , item sl no 230 b011 cap, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch , item sl no 231 b011 cap, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std , item sl no 232 b011 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std, 1.5 inch , item sl no 233 b011 cap, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs , item sl no 234 b012 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 24.0 inch, std, 2.0 inch , item sl no 235 b013 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 30.0 inch, std, 2.0 inch , item sl no 236 b013 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 32.0 inch, std, 30.0 inch , item sl no 237 b014 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 10.0 inch, std , item sl no 238 b014 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 12.0 inch, std , item sl no 239 b014 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 10.0 inch, std , item sl no 240 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, std , item sl no 241 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, 6.0 mm thk , item sl no 242 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 18.0 inch, std , item sl no 243 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 24.0 inch, 8.0 mm thk , item sl no 244 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d, ibr 18.0 inch, std , item sl no 245 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 18.0 inch, std , item sl no 246 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 20.0 inch, std , item sl no 247 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 24.0 inch, std , item sl no 248 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, xs , item sl no 249 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 20.0 inch, 8.0 mm thk , item sl no 250 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 24.0 inch, s30 , item sl no 251 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d, ibr 16.0 inch, std , item sl no 252 b016 t.equal, b-16.9, astm a 234 gr.wpb-w, bw 10.0 inch, std , item sl no 253 b017 t.equal, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, 6.0 mm thk , item sl no 254 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 10.0 inch, std, 8.0 inch, std , item sl no 255 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 8.0 inch, std , item sl no 256 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 10.0 inch, std , item sl no 257 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 6.0 inch, std , item sl no 258 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, std, 14.0 inch, std , item sl no 259 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, xs, 14.0 inch, std , item sl no 260 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 20.0 inch, xs , item sl no 261 b020 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 30.0 inch, std, 28.0 inch, std , item sl no 262 b021 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 8.0 inch, std , item sl no 263 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 18.0 inch, std, 10.0 inch, std , item sl no 264 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 18.0 inch, std, 14.0 inch, std , item sl no 265 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 20.0 inch, std, 18.0 inch, std , item sl no 266 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 16.0 inch, xs , item sl no 267 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 20.0 inch, xs , item sl no 268 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, std, 18.0 inch, std , item sl no 269 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw, ibr 16.0 inch, std, 14.0 inch, std , item sl no 270 b022 reduc.ecc, b-16.9, astm a 420 gr.wpl6-w, bw, lt 16.0 inch, std, 10.0 inch, std , item sl no 271 b022 reduc.ecc, b-16.9, astm a 420 gr.wpl6-w, bw, lt 20.0 inch, xs, 14.0 inch, std , item sl no 272 b023 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 36.0 inch, std, 32.0 inch, std , item sl no 273 b024 elbow.90, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000 0.75 inch , item sl no 274 b024 elbow.90, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000, h2 0.75 inch , item sl no 275 b024 cap, b-16.11, astm a 182 gr.f11 cl.2, scrf, 6000, ibr 0.5 inch , item sl no 276 b024 cplng.full, b-16.11, astm a 182 gr.f11 cl.2, sw, 3000, h2 1.5 inch , item sl no 277 b024 cplng.half, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000 0.75 inch , item sl no 278 b024 cplng.lh, b-16.11, astm a 182 gr.f11 cl.2, sw, 3000, h2 1.5 inch , item sl no 279 b025 nipple, b-36.10, astm a 335 gr.p11, pbe, seamless, ibr 0.75 inch, s160, 80 mm , item sl no 280 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 8.0 inch, xs , item sl no 281 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, h2 2.0 inch, xs , item sl no 282 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, h2 3.0 inch, xs , item sl no 283 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, ibr 8.0 inch, xs , item sl no 284 b026 elbow.45, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 2.0 inch, xs , item sl no 285 b027 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 10.0 inch, xs , item sl no 286 b028 reduc.conc, b-16.9, astm a 234 gr.wp11 cl.1, bw, h2 4.0 inch, xs, 3.0 inch, xs , item sl no 287 b028 reduc.conc, b-16.9, astm a 234 gr.wp11 cl.1, bw, ibr 8.0 inch, xs, 6.0 inch, xs , item sl no 288 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 289 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 290 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 291 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 292 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 293 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 294 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 295 b029 elbow.90, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 296 b029 elbow.90, b-16.11, astm a 182 gr.f316, sw, 3000 1.0 inch , item sl no 297 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 298 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 299 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 300 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 301 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 302 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 303 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 304 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch , item sl no 305 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 306 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.5 inch , item sl no 307 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 308 b029 t.equal, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 309 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch, 0.75 inch , item sl no 310 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch, 0.75 inch , item sl no 311 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch, 1.0 inch , item sl no 312 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch, 0.5 inch , item sl no 313 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch, 0.75 inch , item sl no 314 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch, 0.75 inch , item sl no 315 b029 swage.conc, bs-3799, astm a 182 gr.f304, pbe 0.75 inch, 80s, 0.5 inch, 80s , item sl no 316 b029 swage.conc, bs-3799, astm a 182 gr.f304, pbe, cryo 0.75 inch, 80s, 0.5 inch, 80s , item sl no 317 b029 swage.conc, bs-3799, astm a 182 gr.f304, tse, cryo 0.75 inch, 80s, 0.5 inch, 80s , item sl no 318 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 1.0 inch, 40s, 0.5 inch, 80s , item sl no 319 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 1.5 inch, 40s, 1.0 inch, 40s , item sl no 320 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, cryo 1.0 inch, 40s, 0.75 inch, 80s , item sl no 321 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, lth2 1.5 inch, 40s, 1.0 inch, 40s , item sl no 322 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000 0.75 inch , item sl no 323 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000 1.5 inch , item sl no 324 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.5 inch , item sl no 325 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.75 inch , item sl no 326 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 1.0 inch , item sl no 327 b029 plug, b-16.11, astm a 182 gr.f304, scrm, 6000 0.5 inch , item sl no 328 b029 cplng.full, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.5 inch , item sl no 329 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 330 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 331 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 332 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 333 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 334 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 335 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 6000 0.5 inch , item sl no 336 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 6000 0.75 inch , item sl no 337 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 9000 0.5 inch , item sl no 338 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 9000 0.75 inch , item sl no 339 b029 cplng.full, b-16.11, astm a 182 gr.f316, sw, 3000 1.0 inch , item sl no 340 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 341 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 342 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch , item sl no 343 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.5 inch , item sl no 344 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 345 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 346 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 347 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 1.5 inch , item sl no 348 b029 cplng.half, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 349 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 350 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 351 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 352 b029 cplng.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch, 0.5 inch , item sl no 353 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.5 inch, 80s, 80 mm , item sl no 354 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.5 inch, 80s, 100 mm , item sl no 355 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.75 inch, 80s, 80 mm , item sl no 356 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 1.0 inch, 40s, 80 mm , item sl no 357 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 1.0 inch, 40s, toe mm , item sl no 358 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless, cryo 0.5 inch, 80s, 100 mm , item sl no 359 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless, cryo 0.75 inch, 80s, 80 mm , item sl no 360 b030 nipple, b-36.19, astm a 312 tp304, toe, seamless, cryo 0.5 inch, 80s, 100 mm , item sl no 361 b030 nipple, b-36.19, astm a 312 tp304, toe, seamless, lth2 0.5 inch, 80s, 100 mm , item sl no 362 b030 nipple, b-36.19, astm a312 gr.tp304/304l, pbe, seamless 0.75 inch, 80s, 100 mm , item sl no 363 b030 nipple, b-36.19, astm a312 gr.tp304/304l, toe, seamless 0.75 inch, 80s, 80 mm , item sl no 364 b030 nipple, b-36.19, astm a312 gr.tp304/304l, toe, seamless 0.75 inch, 80s, 100 mm , item sl no 365 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 2.0 inch, 40s , item sl no 366 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 3.0 inch, 10s , item sl no 367 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 4.0 inch, 10s , item sl no 368 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 2.0 inch, 40s , item sl no 369 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 3.0 inch, 10s , item sl no 370 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 10s , item sl no 371 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 40s , item sl no 372 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 10s , item sl no 373 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 40s , item sl no 374 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 10s , item sl no 375 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk , item sl no 376 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, lth2 3.0 inch, 10s , item sl no 377 b031 elbow.90, b-16.9, astm a 403 gr.wp316-s, bw, 1.5d 2.0 inch, 40s , item sl no 378 b031 elbow.90, b-16.9, astm a 403 gr.wp316l-s, bw, 1.5d 6.0 inch, 10s , item sl no 379 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 2.0 inch, 40s , item sl no 380 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 3.0 inch, 10s , item sl no 381 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 2.0 inch, 40s , item sl no 382 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 3.0 inch, 10s , item sl no 383 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 10s , item sl no 384 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 10s , item sl no 385 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk , item sl no 386 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 10s , item sl no 387 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, lth2 2.0 inch, 40s , item sl no 388 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s , item sl no 389 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 2.0 inch, 40s , item sl no 390 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 40s , item sl no 391 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s , item sl no 392 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s , item sl no 393 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s , item sl no 394 b032 t.equal, b-16.9, astm a 403 gr.wp316-s, bw 2.0 inch, 40s , item sl no 395 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 2.0 inch, 40s , item sl no 396 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 3.0 inch, 10s, 2.0 inch, 40s , item sl no 397 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 40s, 2.0 inch, 40s , item sl no 398 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 3.0 inch, 10s , item sl no 399 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 2.0 inch, 40s , item sl no 400 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s, 4.0 inch, 40s , item sl no 401 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s, 3.0 inch, 40s , item sl no 402 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 4.0 inch, 10s , item sl no 403 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 40s, 6.0 inch, 40s , item sl no 404 b033 reduc.conc, b-16.9, astm a 403 gr.wp316-s, bw 2.0 inch, 40s, 1.0 inch, 40s , item sl no 405 b033 reduc.conc, b-16.9, astm a 403 gr.wp316-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 406 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 2.0 inch, 40s, 1.5 inch, 40s , item sl no 407 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 408 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 1.5 inch, 40s , item sl no 409 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 3.0 inch, 10s , item sl no 410 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 3.0 inch, 10s, 2.0 inch, 40s , item sl no 411 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 2.0 inch, 40s , item sl no 412 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 3.0 inch, 10s , item sl no 413 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 4.0 inch, 10s , item sl no 414 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 3.0 inch, 10s , item sl no 415 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s, 4.0 inch, 10s , item sl no 416 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s, 6.0 inch, 10s , item sl no 417 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 6.35 mm thk, 6.0 inch, 10s , item sl no 418 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 10s , item sl no 419 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 6.35 mm thk , item sl no 420 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 12.0 inch, 10s , item sl no 421 b035 elbow.45, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 10s , item sl no 422 b035 elbow.45, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, lth2 12.0 inch, 8.38 mm thk , item sl no 423 b036 t.equal, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s , item sl no 424 b036 t.equal, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 12.0 inch, 10s , item sl no 425 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s, 4.0 inch, 10s , item sl no 426 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s, 6.0 inch, 10s , item sl no 427 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 12.0 inch, 10s, 6.0 inch, 10s , item sl no 428 b038 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 16.0 inch, 10s, 14.0 inch, 10s , item sl no 429 i0429 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 3000 1.0 inch , item sl no 430 i0430 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 431 i0431 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.75 inch , item sl no 432 i0432 elbow.90, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 433 i0433 elbow.90, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.5 inch , item sl no 434 i0434 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 4.0 inch, std , item sl no 435 i0435 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 6.0 inch, std , item sl no 436 i0436 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 8.0 inch, std , item sl no 437 i0437 elbow.90, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 14.0 inch, std , item sl no 438 i0438 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 0.75 inch, s160 , item sl no 439 i0439 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.5 inch, 80s , item sl no 440 i0440 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.75 inch, 80s , item sl no 441 i0441 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 30.0 inch, 22.0 mm thk , item sl no 442 i0442 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 30.0 inch, 14.0 mm thk , item sl no 443 i0443 elbow.90, b-16.9, astm a403 gr.wp304/304l-s, bw, 1.5d 2.0 inch, 40s , item sl no 444 i0444 elbow.45, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 445 i0445 elbow.45, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 6.0 inch, std , item sl no 446 i0446 elbow.45, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 12.0 inch, std , item sl no 447 i0447 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 8.0 inch, std , item sl no 448 i0448 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 10.0 inch, std , item sl no 449 i0449 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 12.0 inch, std , item sl no 450 i0450 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 14.0 inch, std , item sl no 451 i0451 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 24.0 inch, 8.0 mm thk , item sl no 452 i0452 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.5 inch, 80s , item sl no 453 i0453 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.75 inch, 80s , item sl no 454 i0454 elbow.45, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 48.0 inch, 20.0 mm thk , item sl no 455 i0455 elbow.45, b-16.9, astm a403 gr.wp304/304l-s, bw, 1.5d 2.0 inch, 40s , item sl no 456 i0456 pipe.bend, jobstd, astm a 105, bw, 1.5d 1.0 inch, xs, 60 degree , item sl no 457 i0457 pipe.bend, jobstd, astm a 105, bw, 1.5d 1.0 inch, xs, 30 degree , item sl no 458 i0458 pipe.bend, jobstd, astm a 105, pe, 1.5d 1.0 inch, xs, 60 degree , item sl no 459 i0459 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs, 30 degree , item sl no 460 i0460 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std, 90 degree , item sl no 461 i0461 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std, 30 degree , item sl no 462 i0462 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 130 degree , item sl no 463 i0463 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 30 degree , item sl no 464 i0464 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 40 degree , item sl no 465 i0465 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 120 degree , item sl no 466 i0466 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 2.0 inch, xs, 30 degree , item sl no 467 i0467 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 2.0 inch, xs, 120 degree , item sl no 468 i0468 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 3.0 inch, std, 120 degree , item sl no 469 i0469 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 3.0 inch, std, 90 degree , item sl no 470 i0470 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 90 degree , item sl no 471 i0471 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 30 degree , item sl no 472 i0472 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 45 degree , item sl no 473 i0473 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 6.0 inch, std, 90 degree , item sl no 474 i0474 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 85 degree , item sl no 475 i0475 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 90 degree , item sl no 476 i0476 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 80 degree , item sl no 477 i0477 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 70 degree , item sl no 478 i0478 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 60 degree , item sl no 479 i0479 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 50 degree , item sl no 480 i0480 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 45 degree , item sl no 481 i0481 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 30 degree , item sl no 482 i0482 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 8.0 inch, std, 90 degree , item sl no 483 i0483 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 8.0 inch, std, 30 degree , item sl no 484 i0484 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 10.0 inch, std, 90 degree , item sl no 485 i0485 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 9d 8.0 inch, std, 90 degree , item sl no 486 i0486 pipe.bend, jobstd, astm a 403 gr.wp304-s, bw, 3d, cryo 4.0 inch, 40s, 45 degree , item sl no 487 i0487 pipe.bend, jobstd, astm a 403 gr.wp304-s, bw, 3d, cryo 4.0 inch, 40s, 90 degree , item sl no 488 i0488 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 3.0 inch, 10s, 30 degree , item sl no 489 i0489 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 3.0 inch, 10s, 120 degree , item sl no 490 i0490 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 30 degree , item sl no 491 i0491 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 45 degree , item sl no 492 i0492 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 105 degree , item sl no 493 i0493 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 150 degree , item sl no 494 i0494 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk, 30 degree , item sl no 495 i0495 t.equal, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 496 i0496 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 497 i0497 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.5 inch , item sl no 498 i0498 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.75 inch , item sl no 499 i0499 t.equal, b-16.9, a 234 gr.wpb-w (epoxy coated), bw 8.0 inch, std , item sl no 500 i0500 t.equal, b-16.9, astm a 234 gr.wpb, bw, h2 0.75 inch, s160 , item sl no 501 i0501 t.equal, b-16.9, astm a 403 gr.wp304-s, bw 0.75 inch, 80s , item sl no 502 i0502 t.equal, b-16.9, astm a403 gr.wp304/304l-s, bw 2.0 inch, 40s , item sl no 503 i0503 t.red, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch, 0.5 inch , item sl no 504 i0504 reduc.conc, b-16.9, a 234 gr.wpb-w (epoxy coated), bw 8.0 inch, std, 6.0 inch, std , item sl no 505 i0505 reduc.ecc, b-16.9, astm a403 gr.wp304/304l-s, bw 2.0 inch, 40s, 1.5 inch, 40s , item sl no 506 i0506 reduc.ecc, b-16.9, astm a403 gr.wp304/304l-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 507 i0507 reduc.ecc, jobstd, astm a 234 gr.wpb-w, bw 54.0 inch, 14.0 mm thk, 44.0 inch, xs , item sl no 508 i0508 reduc.ecc, jobstd, astm a 234 gr.wpb-w, bw 72.0 inch, 14.0 mm thk, 54.0 inch, 14.0 mm thk , item sl no 509 i0509 swage.conc, bs-3799, astm a 105, pbe 3.0 inch, std, 1.0 inch, xs , item sl no 510 i0510 swage.conc, bs-3799, astm a 105, pbe, h2 2.0 inch, xs, 0.75 inch, s160 , item sl no 511 i0511 swage.conc, bs-3799, astm a 105, pbe, h2 2.0 inch, xs, 1.0 inch, xs , item sl no 512 i0512 swage.conc, bs-3799, astm a 105, pbe, h2 3.0 inch, std, 1.5 inch, xs , item sl no 513 i0513 swage.conc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 514 i0514 swage.conc, bs-3799, astm a 182 gr.f11 cl.2, pbe, h2 3.0 inch, xs, 1.5 inch, xs , item sl no 515 i0515 swage.conc, bs-3799, astm a 182 gr.f304, pbe, cryo 2.0 inch, 40s, 0.75 inch, 80s , item sl no 516 i0516 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 2.0 inch, xs, 0.5 inch, s160 , item sl no 517 i0517 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 518 i0518 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 3.0 inch, std, 1.5 inch, xs , item sl no 519 i0519 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 0.75 inch, 80s, 0.5 inch, 80s , item sl no 520 i0520 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 1.5 inch, 40s, 0.75 inch, 80s , item sl no 521 i0521 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 1.0 inch, 40s , item sl no 522 i0522 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 1.5 inch, 40s , item sl no 523 i0523 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 0.75 inch, 80s , item sl no 524 i0524 swage.ecc, bs-3799, astm a 105, pbe 2.0 inch, xs, 1.0 inch, xs , item sl no 525 i0525 swage.ecc, bs-3799, astm a 105, pbe 2.0 inch, xs, 1.5 inch, xs , item sl no 526 i0526 swage.ecc, bs-3799, astm a 105, pbe 3.0 inch, std, 1.5 inch, xs , item sl no 527 i0527 swage.ecc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 528 i0528 swage.ecc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 0.75 inch, s160 , item sl no 529 i0529 swage.ecc, bs-3799, astm a 105, pbe, ibr 3.0 inch, std, 1.5 inch, xs , item sl no 530 i0530 swage.ecc, bs-3799, astm a 182 gr.f11 cl.2, pbe, h2 2.0 inch, xs, 1.5 inch, xs , item sl no 531 i0531 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 2.0 inch, 40s, 0.5 inch, 80s , item sl no 532 i0532 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 2.0 inch, 40s, 1.0 inch, 40s , item sl no 533 i0533 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, cryo 3.0 inch, 10s, 1.5 inch, 40s , item sl no 534 i0534 swage.ecc, bs-3799, astm a182 gr.f304/304l, pbe, 9000 0.75 inch, 7.47 mm thk, 0.5 inch, 7.47 mm thk , item sl no 535 i0535 cap, b-16.11, astm a182 gr.f304/304l, scrf, 3000 0.75 inch , item sl no 536 i0536 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 34.0 inch, 16.0 mm thk, 2.0 inch , item sl no 537 i0537 plug, b-16.11, astm a 105, scrm 0.5 inch , item sl no 538 i0538 plug, b-16.11, astm a 105, scrm 0.75 inch , item sl no 539 i0539 plug, b-16.11, astm a182 gr.f304/304l, scrm 0.5 inch , item sl no 540 i0540 plug, b-16.11, astm a182 gr.f304/304l, scrm 0.75 inch , item sl no 541 i0541 cplng.full, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 542 i0542 cplng.full, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.75 inch , item sl no 543 i0543 cplng.full, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.5 inch , item sl no 544 i0544 cplng.full, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 545 i0545 cplng.half, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.5 inch , item sl no 546 i0546 cplng.half, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 547 i0547 stub.end, b-16.9, astm a182 gr.f304/304l, bw, 125aarh 0.75 inch, 80s , item sl no 548 i0548 weldolet, mss-sp97, astm a 105, bw 8.0 inch, std, 2.0 inch, xs , item sl no 549 i0549 weldolet, mss-sp97, astm a 105, bw 8.0 inch, std, 3.0 inch, std , item sl no 550 i0550 weldolet, mss-sp97, astm a 105, bw, h2 3.0 inch, xs, 0.75 inch, s160 , item sl no 551 i0551 weldolet, mss-sp97, astm a182 gr.f304/304l, bw 2.0 inch, 40s, 0.75 inch, 80s , item sl no 552 i0552 weldolet, mss-sp97, astm a182 gr.f304/304l, bw 4.0 inch, 10s, 1.0 inch, 40s , item sl no 553 i0553 elbowlet, mss-sp97, astm a 105, bw 8.0 inch, std, 4.0 inch, s160 , item sl no 554 i0554 nippolet, mss-sp97, astm a182 gr.f304/304l, pe, 9000 0.75 inch, 0.5 inch , item sl no 555 i0555 latrolet, mss-sp97, astm a 105, bw 8.0 inch, std, 3.0 inch, s160 , item sl no 556 i0556 111-sp-40301, special reducer 42 x 36 inch with inclined angle 14 deg. line no.p-111-40301 , item sl no 557 i0557 lateral equal tee, size 1 x 1 , 30 deg. mnfstd,astma105, sw, 3000, , item sl no 558 i0558 lateral tee, 45 deg,manufacturers standard, astm a 105, sw, 3000, 1.0 inch x 0.75 inch, line no. 1-ct-111- 41302/41401-b43a-ie , item sl no 559 i0559 lateral un equal tee, size 1 x 3/4 , 30 deg. mnfstd,astma105, sw, 6000, , item sl no 560 i0560 lateral unequal tee, size 2 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 561 i0561 lateral unequal tee, size 2 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 562 i0562 lateral unequal tee, size 3 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 563 i0563 lateral unequal tee, size 3 x 3/4 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw, 6000, , item sl no 564 i0564 lateral unequal tee, size 6 x 3 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw. , item sl no 565 i0565 lateral unequal tee, size 8 x 6 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw. , item sl no 566 i0566 lateral unequal tee, size 8 x 4,45 deg. mnfstd,astm a 234 gr.wpb, bw. => limited

Government Departments

TRN :48857317 | 12 May, 2025

Tender Value : 44.00 Lacs

Jaipur - Rajasthan

Tender for repair work of 24 usq and 36 lsq quarters at pts kherwara district udaipur-- 1 part-a civil,sanitary & electrical 2 plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :12mm thick 3 grading roof for water proofing treatment with water proffing compoundcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) 4 providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 kg/sqm) on top of hot bitumen @1.7 kg/sqm. (1.40 kg of vg-40 (30/40 )grade and 0.30 kg/sqm. of vg-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineerin-charge. 5 making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over p.v.c. sheet 1 mtr. x 1 mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges andmaking and finishing the out let complete 6 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 7 providing and fixing to existing door frames.30mm thick factory made solid panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mmx15mm , top & bottom rails. m.s .frame shall have a coat of steel primers of approved make and manufacture m.s. frame covered with 5mm thick heat moulded pvc „c channel of size30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either sideforming stiles; and 5mm thick, 95mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45degree on the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75 mm shall be flat and20mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided either side of the panel.10mm (5mm x 2) thick, 20mm wide cross pvc sheet shall be provided as gap insert for top rail & bottom rail. panelling of5mm thick pvc sheet to be fitted in the m.s. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x15mm wide pvc sheet bending on inner side, and joined together with solvent cement adhesive. an additional 5mmthick pvc strip of 20mm width is to be stuck on the interior side of the „c channel using pvc solvent adhesive etc.complete as per direction of engineer-in-charge, manufacture?s specification & drawing.(for w.c.and bathroom door shutter). 8 providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure a :25 mm thick .decorative teak veneer both side 9 extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over item no. 8.13. 10 repair of existing steel glazed doors, windows and ventilator, mssheet door, garage doors, compound wall gates etc. by weldingdrilling complete include. cost of welding rods and hire charge ofwelding meachine and tp etc complete 11 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts& screw etc. 12 renewing glass panes, with putty and nails wherever necessary 13 4 mm thick plain glass panes 14 repair of door, window shutters including cost ofmaterial and labour for change of damaged : 15 (c) aldrop of mild steel 16 (i) 12 long x12mm dia 17 (ii) 8 long x 10mm dia 18 (d) stopper of aluminium with 19 (ii) double rubber gutka 20 (g) mild steel tower bolt 6 long 21 (h) steel locking bolt 22 (i) steel handle 6 size 23 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : 24 partly fixed and partly openable [ fixed area not to exceed 33%] 25 supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. 26 providing and fixing square bars or other flat welded to window ventilatiors etc. 27 taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead: 28 of area 3 square meter and below 29 dismantling dry brick pitching in floors drains etc. including stacking of serviceable material and disposal ofunserviceable material within 50 mtr lead 30 dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal ofunserviceable material within 50 meter lead: 31 for thickness of tiles 10mm to 25 mm 32 dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 33 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbishto the dumping ground within 50 meter lead. 34 dismantling gi pipes (external work) including excavation and refilling trenches after taking out the pipes and includingstacking of pipes within 50 meter lead: 15mm to 40mm nominal bore. 35 supplying and fixing in walls machine cut and polished stone shelves, tands and in cm 1:3 with machine cut edges : 36 kota stone minimum 30mm thick. 37 kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 901 to 2000 sq.cm : 38 rajasthan black 39 (4) above 3601 cm 2 slabs 40 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shadesglazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on walls and pillar). 41 add extra over item for marble printed, granite shade tiles 42 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 43 plaster on new surface on wall in cement sand mortar 1:6including raking of joints etc. complete fine finish: 44 25mm thick 45 20mm thick 46 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinth level. 47 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) 48 providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinth level. 49 m15 grade nominal mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 50 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurrymixed with water proofing cement compound consisting of applying :sqm. 275.00(i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .this layerwill be allowed to air cure for 4 hours.(ii) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm this layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. the rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry. 51 filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, usingbrick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 52 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and includingscrapping and priming coat with cement primer. 54 painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision 55 new work 56 painting with synthetic enamel paint of approved brand and manufacture to give an even shade 57 two or more coats on new work 58 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 59 add extra of square rectangular hollow tubular section areused. 60 repair to damaged rcc slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-sqm 1568.00 (i) choping losse and cracked concrete to required depth,cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.(ii) applying epoxy primer on the exposed steel bars.(iii) applying epoxy hardener and resin mix (as permanufectureds specification) on concrete and steel bars with brush.(iv) speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.(v) plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.(vi) cure the plastered surface for 15 days, all work including scaffolding etc. complete in all respect. 61 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2 .) approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant. 62 110mm dia 63 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cementrubber ring and lubricant: 64 coupler (socket) 65 110 mm dia 66 bend 87.5 67 110 mm dia 68 pipe clip 69 110 mm dia 70 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 71 size 580 x 440 mm 72 labour charges for removing w.c. pan (any type) of all sizes with care including all necessary fittings p or s trap. 73 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mmc.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make, p.v.c waste pipe with pvc nut32 mm complete including cutting & making good the wall : 74 size 550x400mm 75 p & f stop cock (is :8931 mark), superior quality & ofb approved make: 76 (-do-) concealed stop cock 15mm. 77 p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc.,complete of approved design: 78 750 litres capacity. 79 add extra for hoisting charges for each floor and tripple layered water tanks 80 for items 2.26.1 to 2.26.4 81 p & f flush cock / flush valve (is : 9758mark) for wc of approved quality make : 82 brass / gun metal half-turn wt. 1 kg. of approved quality / make, 25mm nominal bore. 83 supply & fixing g.i. union isi marked in g.i. pipe line as required complete in all respect of size : 84 15mm dia nominal bore 85 25mm dia nominal bore 86 p & f full-way valve (is:778 mark) or wheel valve ofapproved make : 87 gun-metal 15mm nominal bore. 88 (-do-) 25mm nominal bore 89 p & f gi pipes ( internal works ) with gi fittings excluding union (is:1239 mark) and ms clamps, including cuttingand making good the wall and floors. 90 (a) exposed on wall 91 15mm dia nominal bore 92 b class 93 25mm dia nominal bore 94 b class 95 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. (internal work exposed on wall) 96 20 mm 97 25 mm 98 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes type b for soil and waste discharge system (is:13592 : 1992 marked) of approved quality /make 99 75mm dia 100 110mm dia 101 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes fittings type b for soil and waste discharge system (is:13592 : 1992 marked) of approved quality /make. 102 coupler 103 75mm dia 104 110mm dia 105 bend 87.5 dg. 106 75mm dia 107 110mm dia 108 single tee with door 109 75mm dia 110 110mm dia 111 nahni trap with jali 4” 112 100mm dia 113 pipe clip 114 75mm dia 115 110mm dia 116 p & f bib cock (is : 8931 mark), superior quality ofapproved make: 117 c.p. brass bib cock,15mm nominal bore. 118 p & f sink cocks of superior quality & approved made : 119 c.p. sink cock swinging spout 15mm. 120 p & f square-mouth gully trap `a` grade (is :marked) of approved make complete with c.i. grating, frame & cover masonary chamber in c.m. 1:6, 100mm thick c.c. 1:5:10 base concrete, 40mm thick c.c.m-15 grade coping, 12mm thick cement plaster in cm 1:3 complete as per approved design & type. 121 trap size 150 x 100mm, 7.2 kg. c.i. cover with frame, internal chamber size 300 x 300mm. 122 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation,20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring ,earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 123 inside size 300 x 300 mm depth upto 0.5 m cement cover with frame. 124 construction of manhole in all type of soil inner size 90 x 60 cm. 450 mm thick masonry in cm 1:6, 10 cm. thick cementconcrete 1:5 10 in foundation, 20 mm thick inside plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring, making channels, 80mm thick stone slab covering with 40mm thick m-15 grade c.c. flooring, cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr.lead. 125 depth upto 0.50m

Central Government/Public Sector

TRN :34425880 | 15 May, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for 307 pvc panel size 8 inch x 10 feet pvc u bend pvc l bend sand 20 kg glue 5 kg

Central Government/Public Sector

TRN :34419145 | 14 May, 2025

Tender Value : 0

Khurda - Orissa

Tender for gem bids for cp bib tap , cp pillar tap fancy , ptmt bib tap , ptmt pillar , waste coupling ptmt , grating door , sheet glass , pvc connection , plastic water closer seat , pvc valveless , health faucet , waste pipe 32mm , stainless steel wire cloth , flush sistern ball cock , flush tank liver flush handle , siphon washer , comod bend pipe washer , 1 1 by 4 sink waste pipe pvc , urinal waste pipe , spendal for tap , spendal washer for tap , 1 upvc tank niple , 1 upvc end cap , upvc solvent , m seal , teplon tape , white cement , mirror screw and plug , connection pipe washer , buttom washer , ewc cover clamp , 1 2 half upvc brass elbow , gi nipple half inch length , plumbing tape teflon tape half inch , plumbing tape teflon tape , gi nipple , gi nipple half inch length , gi nipple 1 inch length , gi nipple 3by 4 inch length , gi nipple 3 by4 inch length , gi elbow half inch , gi elbow 3 by 4 inch , gi elbow 1 inch , half inch gi socket , 3 4 inch gi socket , 1 inch gi socket , half inch gi tee , 3 4 inch gi tee , 1 inch gi tee , 3by4 inch by half inch elbow , 1 inch by 3 by4 elbow , half inch gi union , 3 4 inch gi union , 1 inch gi union , gi hooks , nails 1 inch , nails 1 half inch , nails 2 inch , nails 2 half inch , nails 3 inch , mild steel wire , gi socket reducer half inch , gi socket reducer1 inch , gi tee reducer half inch , gi tee reducer 1 inch , 3 by4 inch float valve , 1 inch float valve , half nch gate valve , 1 inch gate valve , 6mm thick ply wood , 4 mm thick ply wood , 4 inch nails , ms screws half inch , ms screws 1 inch , ms screws 1 half inch , ms screws 2 inch , ms screws 3 4 inch , aluminium handles 4 inch , aluminium tower bolt 6 inch , aluminium tower bolt 8 inch , rubber gas kit , floor door stopper

Central Government/Public Sector

TRN :34419788 | 14 May, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for 16 amp socket combination , 6 amp socket with combination , angle holder , cable 10 sq mm 2 core , cable 2 core 16 sq mm , cable pvc 1.5 sq mm , cable pvc 2.5 sq mm , casing caping 3 mtr , change lever 100 amp , change lever 63 amp , exhuast fan 300 x 300 mm , flexible wire pvc twin core , insulation tape , led bulb 9 w , led bulb 15 w , led tube light 4 feet , mcb 2 pole 32 amp , mcb 6 amp , ms screw 20 mm per pkt100 nos , security light 25 w , security light 60 w , wall mounting fan 450mm , switch piano 6 amps , modular switch 16 amp , plug 3 pin 6 amp , cp bib cock 15 mm , cp bib cock 20 mm , door handle , foot valve 20mm , gi gate wall 25 inch , gi gate wall 15 mm , gi elbow 15 mm , gi nipple 15 mm , gi pipe 40 mm dia 6 mtr long , gi socket 15 mm , gi socket 25 mm , gi union 1 inch , gyser element , m seal 100gm each pkt , gi pipe 15 mm dia 6 mtr long , ppr pipe 25 mm , ppr pipe 15 mm , ppr tee 15 mm , flexible pipe , ppr socket 15 mm , ppr union 15 mm , ppr elbow 15 mm , pvc connecting pipe , pvc pipe 3 inch , pvc pipe 4 inch , l bend 4 inch , t bend 3 inch , t bend 4 inch , tank nipple 20 mm , union 15 mm , urinal pot , wash basin , water storage tank 500ltr , water storage tank 200 ltrs , water tank 1000 ltr , wc indian style , pvc cistern 10 ltrs , white cement , gi tee 25mm , looking mirror , soap tray , stop cock 15 mm , towel ring , wall hunger , aluminium strip , teflon tape , back filling compound , paint black , salt , cgi sheet 8 feet long , cgi sheet 10 feet long , cgi sheet 6ft , fevicol 500 gm , fire retardant paint , hdpe sand bag , hinges 4 inch , iron cutting blade , ceramic wash hand basin with pedastal with coupling waste pipe , ldpe sheet , lightning air terminal , nails 2 inch , nails 2 inch 3 inch 4 inch 6 inch , nails 4 inch , nails 6 inch , paint og , oil bound distemper , out bond distemper , paint green , paint brush 4 inch , pbs roll , plywood 8 feet x4 feet x12mm , plywood 6 feet x3 feet x 6mm , rapidite quick setting , paint red , sand , sliding bolt , srt , tapping screw 1 inch , tapping screw 2 inch , tapping screw 4 inch , tapping screw 6 inch , tile cutter machine , tiles cutting blade , tower bolt , white paint , acrylic sheet 4 feet x 3 feet , acrylic sheet 4 feet x 6 feet x 4mm , concetrina coil , cylender slive , barbed wire , binding wire , long angle iron picket 6 feet long , long angle iron picket 10 feet long , lc nc , paint brown , tiles 600 mm x 600 mm , nylone rope 16mm , plastic chair , plastic table , paint yellow , hdpe pipe 25 mm black colour , fire extinguisher 2 ltr , clamp 40mm , y arms , wrm rope , wicks for kero heater , aggregate 20mm graded , aggregate 40mm graded

Central Government/Public Sector

TRN :34413564 | 13 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for initial puncture needle 70mm, 18 gz , catherer sheath introducer system 5 french consisting of a, sheath assembly with non reflux valve side port extension and 3 way stopcockb , catherer sheath introducer system 6 french consisting of a, sheath assembly with non reflux valve side port extension and 3 way stopcock b, vessel dilator question mark mini guide wire with introducer , catherer sheath introducer system 8 french consisting of a, sheath assembly with non reflux valve side port extension and 3 way stopcock b, vessel dilator question mark mini guide wire with introducer , hydrophilic with m coat or equivalent angiography glide catheter head hunter with less lubricity on proximal shaft, 5 fr 100cm permitting 0 point 038 inch wire , c2 cobra hydrophilic angiographic glide catheter m coat permitting 0 point 035 inch guidewire at least 65 cm long , hydrophilic with m coat or equivalent angiography glide catheter with less lubricity on proximal shaft, cobra c1 curve, 5fr 65cm permitting 0 point 038 inch wire , angiography diagnostic catheter picard 5fr, permitting 0 point 038 inch guidewire at least 100 cm long , kampi angiography catheter 40 to 65 cm length, 4oblique 5 fr permitting 0 point 035 inch gw , microcatheter for peripheral vascular intervention with hydrophilic coating and accepting 0 point 018 inch coils , microcatheter for super selective catheterization with 165cm usable length, 2 marker bends,distal soft nitinol braiding, 1 point 5fr distal tip , pre shaped microcatheter 45 degree for superselective intracranial catheterization,0 point21id, 2.8 f proximal od, 2.3 f distal od,150 cm length with 02 radiopaque tip markers

Related Searched Keywords : u bend

List of u-bend Tenders

Tender for gem bids for 307 pvc panel size 8 inch x 10 feet pvc u bend pvc l bend sand 20 kg glue 5 kg

Get u bend Tender Alert...

Related Searched Keywords : u bend

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us