Filters

List of test-plug Tenders

List of latest test-plug Tenders in Indian Tenders. Click on any test-plug Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for test-plug Tenders.

All-Tenders (17)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35754895 | 19 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for proc, 10565538 lv7 fat6x6 al sv e75701411x spring brakeactuater 30 30 10602511 lv7 fat6x6 ee lv8 9914528bushing 10602512 lv7 fat6x6 ee lv8 485780 lp hose 10602531 lv7 fat6x6 ee lv8 548316 lp hose 10325715lv7 mpvy 060 l014 00 evaporator assy 10312270 lv7mpvy 8003402375 return pipe 10363101 lv7 mpvy 11543 0035 1 meter gauge harness 10324010 lv7 stln x7482600 2n turbocharger 10328792 lv7 stln vf 5120423963 p 3404347 remover pin 10565198 w18 hmv 8x8al 010 0009 00 pressure switch low 10377559 k7 4210000062 machine hose binding 10381005 k7 ikg jew877 chassis frame ms channel 70x40x7 mm 10374803k7 spares 6 5 h1 5 horn 10314014 lv7 itr beml 5360001806 spring helical compression 120 long 10314664 lv7 itr beml 5330 003676 seal plain od 170 xid 140 x 4 thick 10317562 lv7 itr beml 50 213 35 uclamp with plate nut for 6mm 10321263 lv7 itrbeml 50 132 plate assy lot 2 to 4 10322517 lv7 itrbeml 50 55 16 5935 003397 junction box lot 1 10318076 lv7 itr beml 50 374 sealing ring lot 3 4 10318318 lv7 itr beml 50 366 13 steel wire rope dia 6x 8000 lot 3 10328968 lv7 av 15 578 003 004 252 68torsion leaf 10344579 lv7 av 15 578 003 104 952 38tension screw 10334925 lv7 av 15 358 349 051 421register circular 2 8 a pk5 160hm 10332860 lv7 av15 339 544 344 702 brake 4 80 10521374 lv7 av 15 dpav 033 assembly fixture for assembling the 10314015 lv7 av 15 578 003 929 952 28 belt 10340636lv7 av 15 578 003 910 552 66 belt clamp 10522023lv7 av 15 dp av 021 cable with lugs for securingthe arm 10340952 lv7 av 15 574 173 260 890 chargercase 10348791 lv7 av 15 578 003 029 952 29 packing 10339543 lv7 av 15 548 241 571 522 metal hose clip bid number gem2025b6832968 dated 29-10-2025 bid document1 146 1 1 10348529 lv7 av 15 578 903 913 352 85 cover, 10341038 lv7 av 15 574 012 056 201 notched couplingsleeve, 10323909 lv7 av 15 1102 04 0166 back bodybox, 10339258 lv7 av 15 574 497 851 580 hook vc500319, 10324872 lv7 av 15 578 003 016 252 80 cover, 10346787 lv7 av 15 578 003 107 752 28 suspension legof cross beam, 10335304 lv7 av 15 39202 label engoil 1102 28 1729, 10335187 lv7 av 15 578 003 038 55262 sight glass, 10521380 lv7 av 15 dp av 035connection for connecting the, 10521970 lv7 av 15dp av 017 connection for opening b for, 10339292lv7 av 15 627 963 210 105 oil filter insert, 10344864lv7 av 15 443 857 027 002 7 pole socket, 10360949lv7 av 15 574 938 030 601 rope d 22, 10338842 lv7 av15 578 003 102 152 28 wrech complete spanner, 10345430 lv7 av 15 578 003 125 526 0 distancewasher, 10367232 lv7 av 15 578 003 122 352 43 twoside hook, 10319636 lv7 av 15 578 003 911 852 60lever assy, 10341053 lv7 av 15 574 012 056 401notched sleeve, 10565098 lv7 av 15 574 715 610 000lamp, 10333682 lv7 av 15 1102 62 0373 spring, 10323504 lv7 av 15 273 111 010 330 ring 65x55, 10323470 lv7 av 15 273 111 010 504 ring 140x125, 10323468 lv7 av 15 273 111 012 311 9 ring 60x50 stn029280 9, 10335993 lv7 av 15 273 111 540 191wipering 60, 10334945 lv7 av 15 358 143 401 120switching unit 101 000 011 001, 10335607 lv7 av 15578 003 101 952 26 washer, 10346462 lv7 av 15 548425 025 010 rampo washer 84502, 10322450 lv7 t 815131 858 019 032 bushing for socket, 10338665 lv7 t815 106 501 140 830 screw cap hexagon head, 10340324 lv7 t 815 130 076 824 974 union tube 130076 824 974, 10328191 lv7 t 815 442 999 271 000 pumpcover, 10614826 lv7 t 815 442 985 511 894 rear carpetlh, 10328939 lv7 t 815 442 630 030 034 yoke seat, 10337642 lv7 t 815 442 078 741 174 rear sheet rh, 10614824 lv7 t 815 442 976 670 024 support filling, 10346815 lv7 t 815 130 051 390 204 wrench open end130 051 390 204, 10610126 lv7 t 815 130 987 420 954instrument panel, 10312513 lv7 t 815 201 066 029 4pump body, 10354396 lv7 t 815 442 076 852 704 lineto b cyl, 10327272 lv7 t 815 442 999 859 884 equippedlong cab, 10317790 lv7 t 815 442 075 063 904 tie rod, 10312538 lv7 t 815 130 076 857 944 union pipe totube 130 076 857 944, 10323343 lv7 t 815 442 076 825104 tube assembly metal 442 076 825 104, 10322771lv7 t 815 207 905 078 4 speaker, 10326387 lv7 t 815443 400 098 0 amplifier azz530a b, 10311431 lv7 t 815993 200 909 0 bearing, 10336745 lv7 t 815 443 400 7140 electro accessories, 10614912 lv7 t 815 549 452015 000 door lock 1337 al, 10334853 lv7 t 815 443 971040 567 washer 0 2 mm, 10330905 lv7 t 815 311 212915 066 washer 6 6mm csn 02 1729 05, 10532254 lv7 t815 hmv 6x6 442 029 590 224 holder, 10335047 lv7 t815 4x4 443 859 002 812 fuse 8a, 10327524 lv7 t 8154x4 443 415 071 000 oil pressure gauge m93, 10321011 lv7 t 815 4x4 442 942 390 184 side filling, 10315893 lv7 t 815 4x4 432 410 020 200 insert wabco, 10324826 lv7 t 815 4x4 347 222 058 000 bulb 24 v 5 wba 15, 10320921 lv7 t 815 4x4 413 321 028 000 allenkey 4, 10322877 lv7 t 815 4x4 130 053 610 064 sealingring js 8, 10532559 lv7 t 815 hmv 309 503 140 822screw cap hexagon head 309 503 140 822, 10589596lv7 t 815 hmv 442 050 910 304 ring, 10589625 lv7 t //bid details2 / 146 / / 1 1 /item category815 hmv 443 851 028 000 switch, 10615325 lv7 t 815hmv 442 050 650 204 spring of telescope lock off, 10615289 lv7 t 815 hmv 614 336 697 000 inner liningcover, 10615305 lv7 t 815 hmv 442 999 859 864 equipedcab center, 10615312 lv7 t 815 hmv 442 999 067 704japanned cab center, 10615166 lv7 t 815 hmv 442 965360 044 cover, 10615131 lv7 t 815 hmv 130 076 530 244plug, 10615224 lv7 t 815 hmv 442 902 700 474 longerstrut, 10615167 lv7 t 815 hmv 548 232 131 000 label, 10615134 lv7 t 815 hmv 442 029 402 304 stop, 10615247 lv7 t 815 hmv 614 336 723 000 roof panel rh, 10523193 lv7 t 815 hmv 482 eg 04048 storagebattery box, 10615262 lv7 t 815 hmv 482 hp 03032inner tube assy, 10615203 lv7 t 815 hmv 482 hp 03057cover assy, 10515650 lv7 t 815 hmv 443 935 020 790ring, 10516440 lv7 t 815 hmv 442 076 608 824 heaterto tannk, 10523259 lv7 t 815 hmv 443 930 159 860cover, 10521366 lv7 t 815 hmv 549 721 030 230 locktaper rh, 10518569 lv7 t 815 hmv 442 028 090 564piping holder, 10524013 lv7 t 815 hmv 442 073 001444 front axle 1st, 10565054 lv7 t 815 hmv 5310 720217059 washer spring tension 107 214 005 060, 10532183 lv7 t 815 hmv 442 051 012 444 washer, 10358621 lv7 t 816 993 050 291 0 harness wring, 10323276 lv7 t 816 993 200 164 0 display 100504, 10348330 lv7 t 816 443 120 001 0 fuel cooler l and r1230622 12, 10358100 lv7 t 816 993 050 284 0 tubefuel supply, 10348185 lv7 t 816 443 400 449 0 timer1531853 39a, 10343191 lv7 t 816 272 212 049 0 beltpk5 800mm, 10337797 lv7 t 816 993 050 011 0 gasketfuel pump, 10529398 lv8 ad ii beml 1600027 transfervalve vpe 20as vo1170322004, 10527081 lv8 ad iibeml 2asj3423 lowering valve v03020752004, 10622236 lv8 pinaka lcr til 109 200 090 513 pinakalauncher tarpauline covers, 10333138 lv7 krz p3053709000 master switch p305, 10316929 lv7 krz 2146103220 holder and link rh drop glass, 10313504lv7 krz 256b 1101078 plug drain cock, 10326526 lv7krz 100 3515110 double safety valve, 10321385 lv7krz 255b 8403012 30 fender right hand, 10335396lv7 krz pd20 3803000 k pressure drop pilot lamppd2k, 10350096 lv7 krz 214 4501240 10 limiter cablewinding gasket, 10323397 lv7 krz 236 1601111 plate, 10527601 lv7 krz 236 1701230 collar gland, 10320654 lv7 krz 250 3506086 hose assy tointermediate axle, 10347104 lv7 krz 200 3401122 brgball strg gear shaft upper support, 10323950 lv7krz 256b 3405192 pin rear support, 10323897 lv7 krz256b 3405187 tubes packing rings, 10326827 lv7 krz314538 p29 t piece, 10316987 lv7 krz 255b 4224190 21hose, 10343974 lv7 krz 236 1701075 a gasket, 10340977 lv7 krz 219 3506327 a pipe assy, 10344772lv7 krz a 32 6105000 actuator lh lock, 10318516 lv7krz 236u 1701203 gasket, 10324509 lv7 krz 255b1104508 v lh tank to cock pipe assy, 10341378 lv7krz 214b 4502022 01 yoke winch propellor shaft, 10322235 lv7 krz 255b 5107032 b cover plate floorsealing, 10325451 lv7 zil 130 1702165 b intermediatearm, 10314177 lv7 zil fg73711300g moulding ringexternal assy, 10333359 lv7 zil 130 3430012steering booster control valve set assy, 10316863lv7 zil 120 3506350 a2 cock air delivery assy, 10339971 lv7 zil 131 2918153 sealing ring, 10332710lv7 zil 130 3401227 propeller shaft attachment, //bid details3 / 146 lv7 sca 562512 remote handle, 10303429lv7 sca 391444 steering column, 10305214 lv7 sca292794 fuel tube feed, 10302123 lv7 sca 262316 camfollower, 10303564 lv7 sca 551421 gasket kit oilcleaner, 10302365 lv7 sca 1121462 timing gearhousing, 10304582 lv7 sca 234328 nipple, 10300252lv7 sca 160670 rubber hose, 10302228 lv7 sca223860 cab support, 10306134 lv7 sca 254635 sealring, 10306025 lv7 sca 809773 screw m5x14, 10304886 lv7 sca 1423608 plug, 10303081 lv7 sca282781 screw, 10304473 lv7 sca 254258 dowel, 10305358 lv7 sca 387354 gasket, 10302633 lv7 sca587149 holder, 10305865 lv7 sca 321786 shaft, 10306108 lv7 sca 254936 seal ring, 10304047 lv7 sca4730 72 047 1633 hose elbow 239924, 10306569 lv7sca 170042 valve spring outer, 10304881 lv7 sca289425 buffer, 10306588 lv7 sca 562366 plug, 10306563 lv7 sca 216589 cap, 10305181 lv7 sca269124 hose, 10302232 lv7 sca 1107660 air vent tube, 10304184 lv7 sca 562596 nipple, 10526593 lv7 sca6625 72 046 7412 test set control monitor 371081, 10300789 lv7 sca 202591 bushing, 10304956 lv7 sca143691 coupling nut, 10302577 lv7 sca 279610 mainbearing std 101 62mm, 10307501 lv7 sca 239173control lamp full beam, 10305720 lv7 sca 387264gasket, 10303883 lv7 sca 180939 lever, 10302080lv7 sca 261792 glass, 10302073 lv7 sca 161078 valve, 10302045 lv7 sca 33021 ball bearing, 10302880 lv7sca 279620 connecting rod brg std 84 25mm, 10305972 lv7 sca 313511 stud, 10302048 lv7 sca161070 socket front, 10305960 lv7 sca 150814sleeve, 10306522 lv7 sca 216239 connector, 10304012 lv7 sca 239887 piston rod, 10306151 lv7sca 232040 bolt, 10301883 lv7 sca 246855 bulb 70w24v, 10306113 lv7 sca 231868 washer, 10305520 lv7sca 297394 hose, 10300884 lv7 sca 5315054150154262 bearing bolt, 10303219 lv7 sca 306907 o ring10565538 lv7/fat6x6/al/sv e75701411x spring brakeactuater 30/30, 10602511 lv7/fat6x6/ee/lv8 9914528bushing, 10602512 lv7/fat6x6/ee/lv8 485780 lp-hose, 10602531 lv7/fat6x6/ee/lv8 548316 lp-hose, 10325715lv7/mpvy 060-l014-00 evaporator assy, 10312270lv7/mpvy 8003402375 return pipe, 10363101 lv7/mpvy115-43-0035-1 meter & gauge harness, 10324010lv7/stln x-7482600-2n turbocharger, 10328792lv7/stlnvf 5120-423963/p-3404347 remover pin, 10565198 w18/hmv/8x8/al 010-0009-00 pressure switchlow, 10377559 k7 4210-000062 machine hose binding, 10381005 k7 ikg-jew-877 chassis frame ms channel70x40x7 mm, 10374803 k7 spares 6.5/h1/5 horn, 10314014 lv7/itr/beml 5360-001806 spring helicalcompression 120 long, 10314664 lv7/itr/beml 5330-003676 seal plain od 170 x id 140 x 4 thick, 10317562lv7/itr/beml 50-213-35 u clamp with plate & nut for6mm , 10321263 lv7/itr/beml 50-132 plate assy lot 2to 4, 10322517 lv7/itr/beml 50-55-16 / 5935-003397junction box lot 1, 10318076 lv7/itr/beml 50-374sealing ring lot 3 & 4, 10318318 lv7/itr/beml 50-366-13 steel wire rope dia 6 x 8000 lot 3, 10328968lv7/av-15 578-003-004-252-68 torsion leaf, 10344579lv7/av-15 578-003-104-952-38 tension screw, 10334925lv7/av-15 358-349-051-421 register circular 2.8 a pk5160hm, 10332860 lv7/av-15 339-544-344-702 brake 4-80, 10521374 lv7/av-15 dp-av-033 assembly fixture forassembling the , 10314015 lv7/av-15 578-003-929-952-28 belt, 10340636 lv7/av-15 578-003-910-552-66 belt //bid details4 / 146 clamp, 10522023 lv7/av-15 dp-av-021 cable with lugsfor securing the arm , 10340952 lv7/av-15 574-173-260-890 charger case, 10348791 lv7/av-15 578-003-029-952-29 packing, 10339543 lv7/av-15 548-241-571-522 metal hose clip, 10348529 lv7/av-15 578-903-913-352-85 cover, 10341038 lv7/av-15 574-012-056-201notched coupling sleeve, 10323909 lv7/av-15 1102-04-0166 back body box, 10339258 lv7/av-15 574-497-851-580 hook vc 500319, 10324872 lv7/av-15 578-003-016-252-80 cover, 10346787 lv7/av-15 578-003-107-752-28 suspension leg of cross beam, 10335304 lv7/av-1539202 label eng oil1102 28 1729, 10335187 lv7/av-15 578-003-038-552-62 sight glass, 10521380 lv7/av-15dp-av-035 connection for connecting the , 10521970 lv7/av-15 dp-av-017 connection foropening b for *, 10339292 lv7/av-15 627-963-210-105oil filter insert, 10344864 lv7/av-15 443-857-027-002 7pole socket, 10360949 lv7/av-15 574-938-030-601 roped-22, 10338842 lv7/av-15 578-003-102-152-28 wrechcomplete spanner, 10345430 lv7/av-15 578-003-125-526-0 distance washer, 10367232 lv7/av-15 578-003-122-352-43 two side hook, 10319636 lv7/av-15 578-003-911-852-60 lever assy, 10341053 lv7/av-15 574-012-056-401 notched sleeve, 10565098 lv7/av-15 574-715-610-000 lamp, 10333682 lv7/av-15 1102-62-0373 spring, 10323504 lv7/av-15 273-111-010-330 ring 65x55, 10323470 lv7/av-15 273-111-010-504 ring 140x125, 10323468 lv7/av-15 273-111-012-311-9 ring 60x50 stn029280.9, 10335993 lv7/av-15 273-111-540-191 wipering60, 10334945 lv7/av-15 358-143-401-120 switching unit101 000 011 001, 10335607 lv7/av-15 578-003-101-952-26 washer, 10346462 lv7/av-15 548-425-025-010 rampowasher 84502, 10322450 lv7/t-815 131-858-019-032bushing for socket, 10338665 lv7/t-815 106-501-140-830 screw cap hexagon head, 10340324 lv7/t-815130-076-824-974 union tube 130 076 824 974, 10328191 lv7/t-815 442-999-271-000 pump cover, 10614826 lv7/t-815 442-985-511-894 rear carpet lh, 10328939 lv7/t-815 442-630-030-034 yoke seat, 10337642 lv7/t-815 442-078-741-174 rear sheet rh, 10614824 lv7/t-815 442-976-670-024 support filling, 10346815 lv7/t-815 130-051-390-204 wrench open end130 051 390 204, 10610126 lv7/t-815 130-987-420-954instrument panel, 10312513 lv7/t-815 201-066-029-4pump body, 10354396 lv7/t-815 442-076-852-704 lineto b/cyl, 10327272 lv7/t-815 442-999-859-884 equippedlong cab, 10317790 lv7/t-815 442-075-063-904 tie rod, 10312538 lv7/t-815 130-076-857-944 union pipe totube130-076-857-944, 10323343 lv7/t-815 442-076-825-104 tube assembly metal442 076 825 104, 10322771lv7/t-815 207-905-078-4 speaker, 10326387 lv7/t-815443-400-098-0 amplifier azz530a/b, 10311431 lv7/t-815993-200-909-0 bearing, 10336745 lv7/t-815 443-400-714-0 electro accessories, 10614912 lv7/t-815 549-452-015-000 door lock - 1337 al, 10334853 lv7/t-815 443-971-040-567 washer 0.2 mm, 10330905 lv7/t-815 311-212-915-066 washer 6.6mm csn 02 1729.05, 10532254lv7/t-815 hmv6x6 442-029-590-224 holder, 10335047lv7/t-8154x4 443-859-002-812 fuse 8a, 10327524lv7/t-8154x4 443-415-071-000 oil pressure gaugem93, 10321011 lv7/t-8154x4 442-942-390-184 .sidefilling, 10315893 lv7/t-8154x4 432-410-020-200insert wabco, 10324826 lv7/t-8154x4 347-222-058-000 bulb 24 v/5 w ba 15, 10320921 lv7/t-8154x4 413- //bid details5 / 146

Central Government/Public Sector

TRN :35733769 | 07 Nov, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for cement make ambuja or dalmia or ultrateck, guirder ismb20 feet long, srt of size 8 feet long, screw normal 1.5inch, screw normal 2 inch, cassing capping 6 feet long, ceilling rose make syska led or philips or bajaj, pendentholder make syska led or philips or bajaj, led buld 12watt make syska led or philips or bajaj, led tube light 4feet long make syska led or philips or bajaj, ssc 5 ampmake syska led or philips or bajaj, ssc 15 amp make syskaled or philips or bajaj, ceilling fan make syska led orphilips or bajaj, cable 1 point 5 sqmm 1 core make polycabor havells or finolex, cable 2.5 sqmm 1 core make polycabor havells or finolex, wooden cutting machine with 2 blade, wooden scantling of size 2 inch x 3 inch x 9 feet, woodenscantling of size 2 inch x 3 inch x 10 feet, woodenscantling of size 2 inch x 3 inch x 7 feet, self thread screwsize 2 inch, self thread screw size 3 inch, nails size 4 inch, drill bit size 8 mm for wood, drill bit size 8 mm for iron, led garden light blue make syska led or philips or bajaj, led garden light green make syska led or philips or bajaj, candle led warm white light 3 watt make syska led orphilips or bajaj, wall primer make berger or asian or dulux, red paint make berger or asian or dulux, navy blue paintmake berger or asian or dulux, copper wire single core 2point 25 sqmm, insulation tape, cutting plier taparia, screw driver multi purpose 12 inch, hand gloves electrician, og paint make berger or asian or dulux, brown paintmake berger or asian or dulux, green paint make berger orasian or dulux, black paint make berger or asian or dulux, blue paint make berger or asian or dulux, thinner, limechuna, red gobi, apex ultimate sonnet colour makeberger or asian or dulux, brush 2 inch, nails 3 inch long, drill bit star 8mm, black screw 1 inch long, self screw 1by 2 inch, binding wire, nails 1 feet long, hinges 3 feet /bid number: gem/2025/b/6829366* /dated: 27-10-2025 & & / bid document1 / 97 & & /item categorylong, ppr plain socket 32 mm, bib cock 15 mm, healthfaucet 15 mm, looking mirror 400 by 600 mm, ug cable16 sqmm 4 core, cable 10 sqmm 2 core make polycab orhavells or finolex, flexible wire two strands make polycabor havells or finolex, bed switch 1 way, screw clip forcassing capping, poultry shed net iron, change overswitch 63 amp, flexible pipe 3 layred heavy duty of dia, pvc pipe connector 1 feet, pipe clamp iron 1 feet, rectangular iron pipe of dia 20 feet x 3 feet x 1 or 1 by 2inch, ppgi sheet 17 feet x 4 inch, wire mesh steel 20 feetx 4 feet, square iron pipe 20 feet x 2 inch x 2 inch, welding rod, door aldrop, cutting wheel 5 feet dia, plastic tarpaulin 30 feet x 30 feet long, waste pipe forwash basin or urinal point, coupling for wash hand basin, clamp 1 by 2 inch plastic, pvc tee 4 inch dia, pvc pipe 4inch dia 10 feet long, pvc elbow 4 inch dia, pvc socket 4inch dia, window glass 30 cm x 30 cm x 4 mm, samosam, wall mixer hot and cold cp, stop cock cp, normal watertape cp, toilet flush tank, door latch tower bolt, walllamp, halogen lamp 50 watt, ppgi sheet 10 feet long, ppgi sheet 20 feet long, self treaded screw 1 inch long, wall puty, paint brush 4 inch long, wooden beading 1 inch, wooden planks 12 inch x 10 feet long, ppgi sheet 22feet x 4 feet long, mcb 32 amp 4 poles with box, changeover switsh 32 amp, tester electrician, cable 6 sqmm 2core almn, socket electric 1 amp, 3 pin plug 5 amp, 3 pinplug 15 amp, copper wire point 75 sqmm 1 core, 3 pinround socket 6 amp, front plate electrician, 12 model boxelectric, 12 model plate electric, electric blank switch 1mm, white paint make berger or asian or dulux, callingbell make anchor or philips or bajaj, flexible wire makepolycab or havells or finolex, electric box with switch makeanchor or philips or bajaj, led adaptor for strip light makeanchor or philips or bajaj

corporations/Associations/Others

TRN :35737346 | 07 Nov, 2025

Tender Value : 7.19 Lacs

Jind - Haryana

Tender for gem bids for equipment, pressure gauge calibration, pressure switch calibration, temperature gauge calibration, temperature switchcalibration, vaccum gauge calibration, ambient airmonitoring, stack emissions testing, ambeint noise levelmonitoring, work zone noise monitoring, drinking watertesting, borewell water testing, etp inlet and outlettesting, vibration testing and analysis, verniercaliper calibration, plain plug gauge calibration, torquewrench calibration, micrometer calibration, luxmetercalibration, insulation tester calibration, clamp metercalibration, dig master press gauge calibration, digtachometer calibration, earth resistance tester calibration, ultrasonic thickness gauge calibration, digital multimetercalibration, megger calibration, sound level metercalibration, coating thickness meter calibration, transformer oil testing, dga of transformer oil

State Government

TRN :35722522 | 18 Nov, 2025

Tender Value : 0

Shahdol - Madhya Pradesh

Tender for gem bids for r410 gas, r 32 gas, r 22 gas, lpg gas, lpg, lpg flame, shampoo, copper tube, cotton waste, clamp meter, nitrogen pressure gas, refrigeration oil, capacitor, relay, control board, polyurethine foam, abs plastic, sheetalluminium, copper wire for wiring, silicon chipscapacitor, chalk, duster, photocopy paper, file cover, paper pin steel, nirma powder, modular plate, modularplate, modular switch, modular switch, modular socket, ceiling rose, angle holder, modular dummy, round plate, insulation tape, packing tape, condensor, sleeve, winding sheet, thread for winding, tarpin oil, grease, giwire, soldering wire, pvc clip, led bulb, straight holder, plug top, electrical wiring board, mcb box, single doormcb distribution box, mcb, insulator, modular board, modulate switch, fan regulator, led, copper wire, powerswitch, power socket, diode 4007, transistor, igbt, ujt, resistance, mosfet, pcb plate, soldering iron, desoldering pump, solder wire, solder paste or flux, general purpose pcb blanks, copper clad board, conecting wires, carbon film resistors various wattageand resistance values, capacitors different types ceramic, electrolytic, tantalum and voltage capacitance values, diodes general purpose, rectifiers, zener diodes, amplifieric, digital ic ex-nor gate, single phase center tappedstepdown transformer, spst switch, single way switch, two way switch, audio video cable, bnc connector, kitkat fuse, mcb fuse, rj45 connector, sata connector, scr, diac, triac, microcontrollers, battery, regulated ics, timer ic, ic base, dry cells, led bulbs, neon tester, ldr, opto coupler ic, logic gates ic, fip flop ic, counteric, decoder ic, op amp ic, function generator ic, fmtransmitter ic, receiver ic, piezo buzzer, frequencymultiplier ic, digital ics, optical fibre cable, ms flate, msround bar, power hexa blade, cutting tool, ms block, msgear blank piece, ms gear blank piecce, ms gear blankpiece, ms bar, ms sheet, ms filler rod

Central Government/Public Sector

TRN :35722536 | 18 Nov, 2025

Tender Value : 0

Agra - Uttar Pradesh

Tender for gem bids for 1over spectacles safety goggles, 2goggles forchemical splash protection, 3safety goggles forwelding, flip up pattern, 4electric arc welding safetygoggles, 5ear plugs, 6ear muff, 7full face grindingprotective shield, 8leather welding hood withprotective gear work cap head face neck shield., 9leather welding hood with auto darkening filter lens withfull face and neck shoulder coverage., 10disposablehydrocarbon dust mask, 11cotton hand gloves, 12leather hand gloves, 13nitrile hand gloves, 14low temperature butyl hand gloves, 15fireproximity aluminium suit with jacket, trouser, handgloves, over boots, breathing apparatus setpouch inside, head protection helmet, screen, manual etc, 16fireman suit three layer clothingfire with helmet, knitted sock hood, hand gloves, boot etc., 17pvc chemical suit includinghood, jacket, pant, gloves and overboots etc, 18full body harness, 19dangri boiler suit, 20water gel blanket, 21gum boots, 22industrialsafety shoes, 23mega phone with mike of min100meter range, 24first aid box with complete listof items mentioned in technical specifications., 25fire blanket piece of non asbestos, 26sparkarrestor, 27barricading tape, 28polypropylenewind sock cloth, 29traffic cone 1000mm, 30firehose box, 31delivery hose pipe of 15mtr., 32nylonfoldable stretcher, 33gun hand control branch, 340.5 inch nylon rope of min 50meter length each, 35smoke detector testing and removal kit withfollowing accessories access pole, dispenser, detector removal tool, storage bag, 36heatdetector testing kit with following accessoriescordless heat head, unit, battery, battery charger, 37reflective jacket, 38jumbo curtain nozzle, 39fire extingusher ball, 40smoke detector checkspray

Central Government And Public Sector

TRN :35725984 | 10 Nov, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6827905* /dated: 27-10-2025 & & / bid document1 / 47 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Central Government And Public Sector

TRN :35711765 | 14 Nov, 2025

Tender Value : 6.02 Lacs

Mumbai - Maharashtra

Tender for gem bids for file flat bastard, file flat second cut, fle halfround bastard, file half round bastard, fileround bastard, file triangular bastard, filesquare bastard, file wardening, straight scriber, inside caliper spring type, outside caliper springtype, double end spanner british, allen keyhexagon metric, screw driver, hss twist drillstraight shank, hss hand tap, adjustable tapwrench set, hss circular spilt die, hss die stockdie holder, hss countersink bit, hsscounterboring tool with pilot set, slotted angleplate, inside micrometer, outside micrometer, vernier micrometer, bevel protractor, combination set, dial test indicator with standand magnetic base, 0.01mm, telescopic gauge set of6 pcs, range 8 to 150 mm, small hole gauges set, plug gauges set, ring gauges set, universalscribing block, sprit level precision /bid number: gem/2025/b/6817300* /dated: 24-10-2025 & & / bid document1 / 41

Related Searched Keywords : test plug

List of test-plug Tenders

Get test plug Tender Alert...

Related Searched Keywords : test plug

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us