Filters

List of tee-clamp Tenders

List of latest tee-clamp Tenders in Indian Tenders. Click on any tee-clamp Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for tee-clamp Tenders.

All-Tenders (21)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381056 | 25 Sep, 2025

Tender Value : 6.08 Lacs

Balasore - Orissa

Tender for labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 100mm dia gi socket is 1239 (part-ii/1992 ) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost of 160mm×110mm dia pvc reducing socket. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. consturction of 3 phase l.t.line as per rec standard confirming to re rule 1956 with 200kg bm long psc pole support in 0.40m span with 3x35mm² +1x25 mm ² lt x lpe ab cable with coil earthing device, lt dead end clam, suspension clamp with i hook , stay accessories such as wire insulator , clamp etc. nut bolts, alonwith concreting of poles and stay as per direction of engineer in charge. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381064 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government And Public Sector

TRN :35368090 | 29 Sep, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for plumbing, 4 inch swr non isi pipe plasto 2.5kg, 3 inch swr nonisi pipe plasto 2.5kg, 50mm pl pvc pipe 3mtrcommercial, 40mm pl pvc pipe 3mtr commercial, 4inch swr door bend, 4 inch swr bend plain, 4 inchswr door tee, 4 inch swr tee plain, 3 inch swrbend plane, 3 inch swr tee plane, 3 inch swrcoupler isi, 3 inch swr door bend, 3 inch swr doortee, 4 inch swr vent cowl, 3 inch swr vent cowl, 50mm pl pvc elbow, 50mm pl pvc coupler 6kg, 40mmpl pvc elbow, 40mm pl pvc tee, 40mm pl pvc fta, 4inch nicco clamp u, kaju clamp 1.25 inch upvc, 3inch swr nahani trap 4x3 hy, 3 inch swr multi trap, lubricant 250ml ls, 4 inch swr shoe bend isi, 3 inchswr shoe bend isi, 50mm pl pvc shoe bend, 40mm plpvc shoe bend, kaju clamp 1.5 inch upvc, 3 inch giclamp heavy, 4 inch swr coupler isi, 50mm pl pvctee, 1.5 inch pl cpvc pipe 13.5 sdr ft, 1 inch pl cpvcpipe 13.5 sdr ft, 0.75 inch pl cpvc pipe 13.5 sdr ft, 1.5 inch pl cpvc elbow, 1.5 inch pl cpvc tee, 1.5 inchpl cpvc coupler, 1.5 inch pl cpvc fta brass, 1.5 inchpl cpvc mta brass, 1.5x1 inch pl cpvc reduser, 1.5x1 inch pl cpvc r tee, 1.5x1 inch pl cpvc r-bush, 1inch pl cpvc elbow, 1 inch pl cpvc tee, 1 inch plcpvc copler, 1x0.75 inch pl cpvc r tee, 1x0.75 inchpl cpvc reducer, 1x0.75 inch pl cpvc bush, 0.75 x 0.5inch pl cpvc brass elbow, 0.75 x 0.5 inch pl cpvcbrass mta, 0.75 x 0.5 inch pl cpvc brass fta, 0.75inch pl cpvc elbow, 0.75 inch pl cpvc tee, 0.75 x 0.5inch pl cpvc brass tee, 0.75 inch pl cpvc copper, 1.5inch pl cpvc ball valve, 1 inch pl cpvc ball valve, 0.75 inch pl cpvc ball valve, 1.5 inch pl cpvc union, 1 inch pl cpvc union, 0.75 inch cpvc union, 1.5 inchpl cpvc shoe bend, 1 inch pl cpvc shoe bend, 0.75 /bid number: gem/2025/b/6680369* /dated: 13-09-2025 & & / bid document1 / 66 inch pl cpvc shoe bend, cpvc solution 250ml, kajuclamp 1.5 inch cpvc, kaju clamp 1 inch cpvc, kajuclamp 0.75 inch cpvc, 0.75 inch pl cpvc step overbend, cera metropole 40mm f8010111c, cera flushcock body f4060101, cera flush cock platef1015751, cera chevron concealed cistern, ceracontrol plate b1120101, cera cistern compassb1020106, cera wyh campbell s104313137 w, ceraconcealed comod s1053103, cera one piece capstan, cera divertor hf f4030101, cera wall mountedhot and cold mixer f4065103, cera upper plate hotand cold kit wall mounted f1015473, cera sensorjents urinal s4010102, cera ladies urinal s4040101, cera down plate victor 1015721 h, cera sesnordeck mounted high neck f601, cera 21 inch op whitecalina, cera con body victor f1015361, cerashower 8x8 f7010503ab, cera diverter 5 wayf8015743 ch, cera angle cock vic, cera 2 way bibcock vic f10151, pvc connection 18 inch jsn heay, cera hand shower f730101abta, cera h faucetf8030105 ab hy, cera button spout f1019662, jetspray multi, ancor bolt 88 exhy, rack bolt hy, basin west coupling extra heavy, tapelon tape, birla white cement, cera 2 way wall mixer f101540, pressure pump tesla with tank, havelees gyseer, cera basin caffie, bath tub size 5x2.5 with ss framejacuzzi system with 1.5 hp pump, shower head 3 way2x2, jaq shower pannel shp-wh-st861, steiner 1.5inch king brass, shower tube h 1.5 mtr hevy, jaq 1flush flv-chr-1073c, jaq 1 flush plate, body jetshower, hp printer m329dw, speaker audimex 180w15 inch woofer

corporations/Associations/Others

TRN :35353085 | 03 Oct, 2025

Tender Value : 0

Khammam - Telangana

Tender for gem bids for 1000, o ring part no 3049221, clamp hose part no 43828 c, gasket part no 3046852, assembly filter screen partno 146483, ring sealing part no 154088, o ring part no3818885, hose part no ak 6034 ss, hose part no ak6032 ss, hose part no ak 6031 ss, hose flexible partno ak 6029 ss, hose fuel supply part no ak 6090 ss, hose part no ak 10021 ss, hose part no ak 4010 ss, valve shut off part no ar3239601, hose filter fuelpart no ak16030 ss, element filter fuel part no3238493, element lub filter part no 3238204, sealrectangular ring 4308682, filter lub oil by pass partno 3879488, element part no 3873576, hose part no ak6011 ss, hose part no ak 6019 ss, hose part no ak 6045ss, elbow part no 68645, elbow part no s 1040 a, bushing part no s 1039 a, bushing part no s 967, teepipe part no s 933 e, nipple part no 102780, bushingpart no s 964, seal o ring part no 3003016, clamp tbolt part no 3233194, hose assembly part nohs604500st, hose turbo drain part no 3235704, elbow part no 3030772, clamp t bolt part no 125741, clamp t bolt part no 140313, clamp t bolt part no140314, elbow part no 3010514, gasket rubber partno 3873700, element air cleanner part no 3237954, belt alternator part no 178456, hose part no ak 4015ss, hose part no ak 10050 ss, hose part no ak 16030 ss, fan belt part no 3230134

Central Government/Public Sector

TRN :35339322 | 03 Oct, 2025

Tender Value : 0

Dibrugarh - Assam

Tender for gem bids for boq, aluminium aldrop bolt 300 mm make- prayag classiccrown app polymeric membrane hyperplas 4 kgs std in rollof 10 sqmtr bathroom cabinet mirror pvc 450x350 mmmake- prayag jainko prima boot nails for wire mesh bowhandle aluminium 100 mm make- prayag classic crown central hole basin mixture swan neck make- prayag jainkoprima clamp for 15 mm gi pipe cp bip tap 15mm make-prayag jainko prima cp brackets for curtian rod cpconcealed stop cock 15 mm make- prayag jainko prima cp curtain rod 19 or 20mm cp grating 100 mm roundmake- prayag jainko prima cp pillar cock mixture make-prayag jainko prima cp shower rose 15mm make-prayag jainko prima cp stop cock 20 mm female make-prayag jainko prima cp waste coupling 32mm make-prayag jainko prima curtain rod 120cm long 20 mm diamake- prayag jainko prima door closer hydraulic leftside open make- everest universal godrej door closerhydraulic right side open make- everest universal godrej door handle aluminium 150 mm make- prayag classiccrown door stopper pvc oblique rubber make- prayagclassic crown elbow gi 15 mm isi marked elbow gi 20mm isi marked ewc seat cover white with nut andwasher pvc make- sintex polycon jindal prima floatvalve pvc 15 mm complete set make- prayag jainko prima float valve pvc 20 mm complete set make- prayagjainko prima floor door stopper 40 mm make- prayagclassic crown flush cistern pvc 9 to10 ltr make- prayagjainko prima galvanised wire cloth guage 056mm galvanised wire cloth guage 063mm gi socket 15 mm isimarked gi socket 20mm isi marked gi tee 15 mm isimarked gi tee 20mm isi marked gi tube 15 oblique 20mm isi marked gi union 15 mm oblique 20 mm isi marked glass corner self make- prayag jainko prima glass pane bid number gem2025b6657819 dated 12-09-2025 bid document1 67 1 1 pin head 4 mm thick make- saint gobin, modiguard, swastik, , glass pane plain 3 mm make- saint gobin, modiguard, swastik, , glass putty white make- birla white, jk white, berger, glass shelf diplomat cp 600 mm make-prayag, jainko, prima, glass shelf diplomat of size 525 mmmake- prayag, jainko, prima, grating s steel 100mm roundmake- prayag, jainko, prima, hacksaw blade 300 x 12 point5 x 0 point 63 mm hss isi marked, haps and staple 75mmmake- prayag, crown, classic, health faucet cp make-prayag, jainko, prima, helical door spring ms 250 mmmake- prayag, crown, classic, hinges butt steel 100 mmmake- prayag, crown, classic, kitchen sink stainless steelwith draining board 1 mm thick 45x20 inch make- prayag, jainko, prima, kitchen sink without draining make- prayag, jainko, prima, looking mirror with aluminum beading make-saint gobin, modiguard, swastik, m seal, nail wire 75 mmx8 swg, nipple gi 15x50mm isi marked, nipple gi 15x100mm isi marked, nut and bolt 75 mm full threaded, nutand bolt for wire mess 3mm dia with head, peg set of five, plug gi 15 oblique 20 mm isi marked, plywood 12mm8feet x4feet make- kitply, century ply, green ply, plywood 4mm 8feet x4feet make- kitply, century ply, green ply, plywood 6 mm 8feet x4feet make- kitply, century ply, greenply, pvc bend pipe for low level flushing cistern 32 mmmake- prayag, jainko, prima, pvc bib cock 15mm make-prayag, jainko, prima, pvc bib cock with flange make-prayag, jainko, prima, pvc connection pipe both end ptmtnuts 15x 375mm make- prayag, jainko, prima, pvcconnection pipe both end ptmt nuts 15x 600mm make-prayag, jainko, prima, pvc grating 100mm make- prayag, jainko, prima, pvc grating 150mm make- prayag, jainko, prima, pvc oht cover make- sintex, polycon, jindal, pvcpillar cock 15mm make- prayag, jainko, prima, pvc showerrose 15 mm make- prayag, jainko, prima, pvc stop cock15mm female make- prayag, jainko, prima, pvc stop cock20mm make- prayag, jainko, prima, pvc tank cover 1000ltr make- sintex, polycon, jindal, pvc waste pipe for sinkoblique basin make- prayag, jainko, prima, rack platestainless steel 1mmthick make- prayag, jainko, prima, screw 100mm, screw ms flat head 35 mm 1 kg pkt, screwms flat head 50 mm 1 kg pkt, sliding door bolt aluminium250 mm make- pryayag, crow, classic, sliding door boltaluminium 300 mm make- pryayag, crow, classic, teflontape roll make- prayag, jainko, prima, tower boltaluminium 100 mm make- pryayag, crow, classic, towerbolt aluminium 150 mm make- pryayag, crow, classic, tower bolt aluminium 200 mm make- pryayag, crow, classic, tower bolt aluminium 250 mm make- pryayag, crow, classic, urinal basin flat back white vitreos glazed chinaclay make- parryware, hindware, cera, wall mixer nontelephonic make- prayag, jainko, prima, wall mixer swanneck make- prayag, jainko, prima, wash hand basin550x400 mm make- parryware, hindware, cera, waste pipeflexible pvc with one end coupling 32x800 mm make-prayag, jainko, prima, water storage tank sintex 1000 ltrmake- sintex, polycon, jindal, water storage tank sintex500 ltr make- sintex, polycon, jindal, wc european typemake- sintex, polycon, jindal, wc flush handle make-prayag, jainko, prima, wc flush syphone make- prayag, jainko, prima, wc indian orrisa pattern 550x440mm make-parryware, hindware, cera, wc symphony bend make-prayag, jainko, prima, white cement pkt of 1 kg make- birlawhite, jk white, berger, white putty for wall make- birlawhite, jk white, berger, wooden bead for cupboard well

Central Government/Public Sector

TRN :35317752 | 01 Oct, 2025

Tender Value : 42.35 Lacs

Sambalpur - Orissa

Tender for gem bids for auto, control unit part no se57110 horn unit part nose57392 end of line unit part no se53799 overrideunit part no se54453 sensor cable 30 ft part nose53729 sensor cable 50 ft part no se53727 sensorcable 25 ft part no se537291 nozzle cap part nose53835 nozzle conical part no se535082 sensorclip part no se54462 teflon bush part no se543351 nitrogen cylinder assy part no se57112 nitrogencylinder assy part no se57480 nitrogen cylinderassy part no se57549 main cable assy l bendoveeride part no se57501 main cable assy part nose57570 main cable assy part no se57170 pipe crossdistributor 4 way part no se535123 dcp cylindermtg bracket part no se57519 dcp cylinder mtgbracket part no se57490 control unit mtg bracketpart no se57263 override unit mtg bracket part nose54405 nozzle bracket part no se543231 nozzlebracket b part no se53691 1 by 2 inch to 1 by 2 inchcoupler part no se53518 1 by 2 inch to 1 by 2 inchelbow part no se535021 3 by 4 inch coupler part nose53570 3 by 4 inch to 3 by 4 inch elbow part nose53630 3 by 4 inch tee part no se53757 teemounting bracket part no se54486 dcp cylinderclamp part no se57491 m10 boss part no se53635 m6x 25 bolt part no se53681 m8 x 20 bolt part nose53608 m8 x 65 bolt part no se53610 m8 x 50 boltpart no se53702 m10 x 40 bolt part no se53605 m6nut part no se53634 m8 nut part no se53611 m6spring washer part no se53626 m8 spring washerpart no se53609 3 by 4 inch hose assy 5500 mm part nose5352271 3 by 4 inch hose assy 1500 mm part nose5358420 3 by 4 inch hose assy 3500 mm part nose5358419 3 by 4 inch hose assy 3000 mm part no bid number gem2025b6647353 dated 10-09-2025 bid document1 64 1 1 se5358416, 3 by 4 inch hose assy 2500 mm part nose5352220, 3 by 4 inch hose assy l bend 2500 mm partno se5352262, 3 by 4 inch hose assy 2000 mm part nose5352222, 3 by 4 inch hose assy 1800 mm part nose5352223, 3 by 4 inch hose assy 1200 mm part nose5352224, 3 by 4 inch hose assy 5000 mm part nose535842, 3 by 4 inch hose assy 1000 mm part nose5358412, 1 by 2 inch hose assy 800 mm part nose5352212, 1 by 2 inch hose assy 1000 mm part nose5358418, 1 by 2 inch hose assy 1200 mm part nose535848, 1 by 2 inch hose assy 1500 mm part nose5352210, 1 by 2 inch hose assy 1600 mm part nose535845, 1 by 2 inch hose assy 1800 mm part nose535229, 1 by 2 inch hose assy 2000 mm part nose535849, 1 by 2 inch hose assy 2500 mm part nose535846, 1 by 2 inch hose assy 3000 mm part nose535847, 1 by 2 inch hose assy 4000 mm part nose535224, 1 by 4 inch hose assy l bend 1800 mm partno se5352234, 1 by 4 inch hose assy 1500 mm part nose5352228, 1 by 4 inch hose assy 900 mm part nose5352296, rapture disc part no se54686, co3 300gpart no se53994, fuse 3a part no se53557, decal partno se544681, dcp cylinder assy 20 kg part no se57510, decal cabin part no se54469, splicing connectorpart no se54539, nozzle conical part no se53508, sensor cable 100 ft part no se53695, portablecylinder assy part no se53836, dcp cylinder tappedpad part no se57119, 3 by 4 inch hose clamp part nose53629, m6 boss part no se53636, m10 x 16 bolt partno se53612, m12 x 25 bolt part no se53698, m10 nutpart no se53606, m10 spring washer part no se53607, m12 spring washer part no se53699, control unit partno se571101, tapped pad for control unit part no se53884, 1 by 4 inch hose clamp part no se53808, 1 by 2 inchhose clamp part no se53633, m6x12 and half bolt part nose53625, 1 by 2 inch star washer part no se58193, pipecross 5 way part no se535121, pipe cross mtg bkt part nose54115, dry chemical powder part no se53753

State Government

TRN :35299772 | 29 Sep, 2025

Tender Value : 0

Koraput - Orissa

Tender for gem bids for bricks, cement, construction sand, tin sheet, interiordoor 1, interior door 2, main door, interior door 3, interior door 4, door frame 1, door frame 2, main doorframe, door frame 3, door frame 4, door latches, doorhinges, hinge screws, door installation, wall tiles, tilecleaner, floor tiles, tile grout, tile dismantling service, tile installation service, tile grouting service, fancapacitors, threading screws 1 inch, electrical casingboxes, plastic cable grips 38mm, pvc insulation tape, pvc nail clamps 6mm, electric wire 1.0sqmm, angleholders, led tube lights 20w, pvc casing 20mm, 4-wayswitch boards, 6a switches, 6a sockets, cable 1.5mm, cable 0.75mm, pvc tape, 40mm wall plugs, trunking30x15mm, plastic c clips 4mm, nail clips 20mm, surfaceboards 4-way, 1-way switch 6a, 3-pin socket 6a, flushmetal box, electrical wiring service, switch n socketinstallation, light fitting service, ladies urinal, odishapan 23 inch, s-type commode, bib cock 2-way, shortbody tap, long body tap, cpvc push fitting, angle cock, shower head, toilet seat cover, wash basin, wastecoupling, waste pipe, health faucet, pillar cock, threadseal tape, cpvc nail clamps 3 by 4 inch, connection pipe, 1.5 inch patch fitting, 1.5 inch wall plate, basin nut bolt, cpvc reducer 3 by 4 inchx1 by 2 inch mta, cpvc reducer3 by 4 inchx1 by 2 inch fta, cpvc plain elbow 3 by 4 inch, cpvc plain tee 3 by 4 inch, cpvc brass elbow 3 by 4 inch, cpvc brass tee 3 by 4 inch, cpvc socket 3 by 4 inch, cpvc bush 3 by 4 inch, cpvc solvent 100ml, upvc plainelbow 3 by 4 inch, upvc socket 3 by 4 inch, ball cock25mm, upvc solvent 100ml, upvc pipe 1.5 inch, upvcbrass fta 1.5 inch, upvc brass mta 1.5 inch, upvc ballvalve 1.5 inch, upvc union 1.5 inch, pvc door tee 110mm, pvc air call 110mm, pvc plain tee 110mm, pvc 45degree bend 110mm, pvc door tee 75mm, pvc plainelbow 75mm, pvc door elbow 75mm, pvc 45 degree bend75mm, pvc plain tee 75mm, pvc pipe 50mm, pvc 45degree bend 50mm, pvc elbow 50mm, pvc tee 50mm, pvc floor trap 75mm, pvc pipe 75mm, pvc air call 75mm, upvc plain elbow 1 inch, upvc brass mta 1 inch, upvcbrass fta 1 inch, tank connector 1 inch, cpvc bush 1 inch, cpvc elbow 1 inch, cpvc plain fta 1 inch, cpvc pipe 1inch, 2 inch pvc mta, 2x1 bush, 1x3 gi rs, gents urinal, 63x50mm rs, 3 by 4 cpvc pipe, 1 inch cpvc, 4 inch ssjubbli clamp, white cement, 4 inch pvc pipe, 50mm pvcpipe, syntax box, mirror, 1.2 inch ss nails, 1.5 inch upvcpipe, plug, 1.5 inch cpvc fta, 1.5 inch pvc elbow, 1.2inchx1 bush, 1 inch pvc fta, west pipe, 1x3 by 4 upvcbush, 1 by 2 inch gi short piece 6 inch, 1 by 2 inch gisocket, 1 by 2 inch gi elbow, thread seal, 3 by 4 cpvcpipe, 3 by 4 plain elbow, 3 by 4 plain tee, 3 by 4 brasstee, 3 by 4 brass elbow, 3 by 4 conceal, 3 by 4 nailclamp, c pvc solvent 100 ml, 3 by 4 ball valve, 3 by 4cpvc brush, 3 by 4 upvc socket, 12 by 12 nepin, 75mmpvc pipe, 75mm pvc tee, 75mm elbow, pvc solvent 200ml, plumbing dismantling, water supply line installation, drainage line installation, sanitaryware installation, tapand faucet installation, general labor charges, sitecleaning and debris removal

Central Government/Public Sector

TRN :35285602 | 25 Sep, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for 10565564 lv7 fat6x6 al sv 1315302185 clutch disc 10602535 lv7 fat6x6 ee lv8 107077 bushing 10602517lv7 fat6x6 ee lv8 107085 bushing 10314800 lv7 ld p0908951 water pump kit maj consisting of 13 item 10320889 lv7 ld b 8780511 hose assy air comp drainto crankcase 10362866 lv7 mpvy 765 50 2783 84 cap 10363043 lv7 mpvy 115 43 0032 1 engine harness 10362545 lv7 mpvy 640 03 1612 1 intermediate pipe 10362681 lv7 mpvy 640 03 1611 1 bend pipe 10609485lv7 mpvy 101 107 expansion valve 10318097 lv7mpvy 007 0029 00 pcb gl w153 24v 10363208 lv7 mpvy115 43 0057 1 indoor light and fan harness 10325837 lv7 mpvy 012 l006 00 stop valve 5 8 10324783 lv7 mpvy f 8500910 pipe assy powdercoated 10611571 lv7 sac10x10 wc al p 5104922 sealkit hor outrigger cylinder 10611607 lv7 sac10x10wc al pk100004 thermostat aitf 50 24v 10611567 lv7sac10x10 wc al p 5104918 seal kit column cylinder 10611568 lv7 sac10x10 wc al p 5104919 seal kit boomcylinder 10609496 lv7 sac10x10 wc al ppt00001sump oil pan gasket 10611572 lv7 sac10x10 wc al p5104923 seal kit vertical outrigger cylinder 10338350 lv7 stln vf x 7820900 sun visor 10611453lv7 sac10x10 wc al p 5104924 seal kit pullingcylinder 10517795 43 i 43 akl b6518525 delivery pipewith hose 10517805 43 i 43 akl b6518515 pump assy 10517889 43 i 43 akl b6518558 water level indicatorassy 10382561 k7 p 2600642 ball valve ss ic 76 2 mm 10386731 k7 f 1500132 impeller for tff large mk vmtd on al 10382035 k7 4210720259466 icn4210002957 hose non metalic cpl delivery w o 10381662 k7 4210720102341 icn 4210 000853 ladderfire extension 4 point 5m 10311958 lv7 itr beml 50 bid number gem2025b6642870 dated 04-09-2025 bid document1 145 grease gun srl no 581 and onwards 10323079lv7 itr beml 50 66 75 d shackle lot 2 10317507 lv7itr beml 50 215 18 hex nut m16 lot 2 3 4 10323029lv7 itr beml 50 245 1 eye bolt 10318419 lv7 itr beml50 359 3 fork lh 50 x 45 x 140 long lot 3 4 10321818lv7 itr beml 5310 006455 nut lock hex rh threadsprecision steel 10372711 w17 mh 39200048converter pump supremo 10369852 w17 mh39550164 hose filter to fip 10373399 w17 iws vs7852135 00 lub oil filter 10351184 w17 mh 59176938brake shoe 10350299 w17 mh 02367750 hose 10351236 w17 mh 02556055 fan belt 10350496 w17mh 02050550 shoe and lining assy 10369850 w17 mh39550621 hose sump to pump 10558622 w17 2023466dummy shaft 10371990 w17 mh 02354659 filterreturn 10351119 w17 iws gbm 59076399 exhaustpipe engine end 10558684 w17 iws acecoq03210200w wheel cylinder kit 10351232 w17 mh39550630 hose tee piston rod to lh rh tilt cyl 10369847 w17 mh 39550629 hose lift rod end to lhrh tilt cyl 10350558 w17 mh 02012102 trans oilfilter 10369848 w17 mh 39550625 hose steering unitto cyl 10351107 w17 iws gbm 39400087 seal kit liftcyl repairs dantal 10350554 w17 mh 02006899moulded hose radiator top 10371411 w17 iws vs785775304 battery cable ve 10347060 lv7 av 15 578003 000 452 12 compensating washer 10348790 lv7av 15 578 003 030 052 29 packing 10337914 lv7 av 15578 003 054 552 62 lug 10336309 lv7 av 15 273 125023 024 rubber cap 10339059 lv7 av 15 309 101 001242 screw m 12x100 10328368 lv7 av 15 309 543 181638 screw m16x80 stn 021143 55 10326949 lv7 av 15110 204 009 6 sealing 10312676 lv7 t 815 993 300 0160 copper washer 10336075 lv7 t 815 130 050 510 584spring helical compression 10332623 lv7 t 815 441054 390 094 protective bag 10319387 lv7 t 815 112163 060 028 ball bearing 112 163 060 028 10324442lv7 t 815 442 954 161 304 bar section 311 mm283422021300 10323837 lv7 t 815 130 946 050 074handle end piece 10337362 lv7 t 815 442 950 470 024ball socket 10331105 lv7 t 815 4x4 442 050 690 444lock pin for front two hook 10523104 lv7 t 815hmv 466 544 268 490 board lamp 10515640 lv7 t 815hmv 311 901 138 000 sealing ring 22x27 csn 02 9310 3 10338508 lv7 t 816 993 100 875 0 tube 10342935 lv7krz 214b 4503050 shoe winch drum brake complete 10318622 lv7 krz 214 6107042 b1 door rear weatherstrip 10316012 lv7 krz 255b 3810027 union 10315278 lv7 krz 255b 3519071 11 frt cyl lh bracketbracket lh frt cyl 10317183 lv7 krz 255b 3125194pipe for branching air to rear lh wheel 10347316lv7 krz 200 3003078a gland oil seal ball pin 10328262 lv7 krz 236 1601273 a3 spring 10317480lv7 krz 214 3519010 b cyl assy frt rh 10323418 lv7krz 311703 p29 nut m24 10337982 lv7 krz 216303 p29stud m14x22x45 rear reducer hsg cover 10344959lv7 krz 210 1801030 a pad rear 10312407 lv7 krz 2143806014 p1 9a2 fuel level indicator transmiterswitch 10347064 lv7 krz 200 3402015 wheel assysteering 10337093 lv7 krz 349600 p29 u bolt nutm30 10325133 lv7 krz 260020p 18c p29 pin 10334050lv7 krz 256b 3570010 10 brake assy 10322555 lv7krz 255b1 3506327 pipe assy to feed line shut offvalve 10316062 lv7 krz 255b 3724059 battery bid details2 145 1 1 connector jumper battery, 10343223 lv7 krz 214b4504013 a winch cable, 10332797 lv7 krz vk318t3704000 switch, 10326732 lv7 krz 100 3515310 cockoutlet valve, 10333946 lv7 krz 256b 3506311 pipewithiout end connection length, 10322748 lv7 krz255b1 3506280 10 pipe assy from brk valve to frt rhcyl, 10333895 lv7 krz 256b 3504012 brake pedal assy, 10323824 lv7 krz 256b 3405043 packing ring, 10347324 lv7 krz 214 8402680 catch hood topcomplete, 10316852 lv7 krz 214 5204030 holderwind shield adj arm wing screw, 10332798 lv7 krzvk34 3720000 air pressure drop signal switch dk 34, 10338094 lv7 krz 212b 5001238 01 washersphericalsprocke, 10352107 lv7 krz 258b 13506135hose, 10322525 lv7 krz 255b1 3506412 connectinghose assy, 10627940 lv7 krz 256b 6804103 lock, 10321838 lv7 krz 255b 6804106 bottom lock, 10336753 lv7 krz pd308a 3715300 hood lamp pd308a, 10331322 lv7 krz 255b 2806030 elastic resilient, 10315207 lv7 krz 255b 3703170 b cover batteryconnector, 10321236 lv7 krz 255b 8511070 lowersplash apron, 10347437 lv7 krz 214b 1104474 fuelfeed pipe flange gasket, 10343142 lv7 krz 214b6103214 glass drop door window, 10323956 lv7 krz256b 3405178 seal, 10338178 lv7 krz 216322 p29 studm16x24x55, 10332381 lv7 krz ub125 3806010 g4 fuellevel gauge, 10336970 lv7 zil 130 3401033 oil sealthrust ring, 10346154 lv7 zil 130t 5205010 windshield wiper sl 440, 10320414 lv7 zil 130 5603018 aweather strip, 10334081 lv7 zil 131 1804103 rodpull back spring, 10334825 lv7 zil 306647 p mainshaft front roller bearing, 10324890 lv7 zil 150v6105194 inner handle escutheon assy, 10333608 lv7zil 130 6104011 left hand window raiser assy, 10315636 lv7 zil 120 3402015 a wheel steering assy, 10333664 lv7 zil 130 6105029 left hand latch assy, 10333917 lv7 zil 131 2203090 propeller shaft splinesprotective boot, 10316153 lv7 zil 120 3502132anchor pin, 10346127 lv7 zil 131 3713230 binstrument pannel illumination lamp, 10332535 lv7zil 411149 p8 zil pipe union pressure regulatorunion, 10346276 lv7 zil 308106 p bulb 21 cp, 10346145 lv7 zil 130t 3801010 b instrument panneltype kp 204 assy, 10543964 lv7 zil 130 3507020 shoefriction lining, 10341389 lv7 zil 131 3733010electromagnet assy, 10320434 lv7 zil 130 6103049door lh vent window assy with removable, 10340615 lv7 zil 421174 p brake valve elbow 3 8, 10528699 lv7 zil 307600 p gland assy, 10324574 lv7zil 131 1103010 fuel tank cap assy, 10331772 lv7 zil130 6105151 left hand handle assy, 10344291 lv7 zil307190 p8 flance attachment stud, 10319835 lv7 zil130 6103101 vent window lh latch and bracket assy, 10319375 lv7 zil 131 3507013 gasket, 10331356 lv7zil 111 2915486 bushing shock absorber head, 10565020 lv7 zil 130 6903200 b passenger seat baseedging, 10330781 lv7 zil 130 5001040 shockabsorbering bush, 10544428 lv7 zil 258257 p2 1 lockwire wire catter pin, 10341534 lv7 zil 130 1602036 apedal seal 130 1602036, 10341474 lv7 zil 130 1701056constant mesh gear, 10343584 lv7 zil 131 5206068middle sealing strip lock, 10338278 lv7 zil 1303514080 diaphragm brake valve, 10344548 lv7 zil307654 p inner gland, 10324878 lv7 zil 131 2303112 //bid details3 / 145 holder, 10333586 lv7 zil 130 5301307 pedal rodboot, 10317982 lv7 zil 130 3514239 ring, 10319814lv7 zil 120 3519059 spring, 10338022 lv7 zil 1303508026 handle, 10344808 lv7 zil 250565 p8 u boltnut, 10325606 lv7 zil 157 2918122 shoe cap gasket, 10341900 lv7 zil 150u 3713300 head lamp beam taillamp pp6 b, 10338420 lv7 zil 130 8402401 head rearsealing strip, 10302247 lv7 sca 224207 cover front, 10305836 lv7 sca 562551 level indicator, 10306520lv7 sca 169158 bearing sleeve, 10305259 lv7 sca562512 remote handle, 10302883 lv7 sca 279621connecting rod brg ud 1 84 00mm, 10303429 lv7 sca391444 steering column, 10305214 lv7 sca 292794fuel tube feed, 10302123 lv7 sca 262316 camfollower, 10303564 lv7 sca 551421 gasket kit oilcleaner, 10304132 lv7 sca 811175 hose, 10307198lv7 sca 214114 disk outer, 10300831 lv7 sca 183896boot, 10307561 lv7 sca 385840 repair kit, 10305027lv7 sca 145397 tee connector, 10305018 lv7 sca145246 connector, 10306179 lv7 sca 153466 gasket, 10301802 lv7 sca 249729 running board, 10302601lv7 sca 279611 main bearing ud1 101 37mm, 10305746lv7 sca 387272 gasket, 10305422 lv7 sca 562555breathing cap, 10300891 lv7 sca 195282 sleeve, 10303134 lv7 sca 218465 tube, 10304879 lv7 sca173203 gasket, 10303480 lv7 sca 271676 push rod, 10305289 lv7 sca 387273 gasket, 10301399 lv7 sca814841 bolt m12x35, 10305535 lv7 sca 214353 sealring, 10304964 lv7 sca 365991 hollow bolt, 10306503 lv7 sca 169124 spring clamp, 10303504 lv7sca 218458 hose, 10307160 lv7 sca 371503 gasket, 10305008 lv7 sca 367762 pressure cover, 10305513lv7 sca 267353 hose, 10303113 lv7 sca 285076 lock, 10305555 lv7 sca 562577 hydrolic hose, 10304834lv7 sca 187607 rubber strip inner, 10306510 lv7 sca215623 pressure regulator valve, 10300828 lv7 sca183577 valve guide, 10302142 lv7 sca 162462 o ring, 10305866 lv7 sca 206450 rubber strip, 10306681 lv7sca 804843 lock ring, 10302365 lv7 sca 1121462timing gear housinglv7/fat6x6/al/sv 1315302185 clutch disc, lv7/fat6x6/ee/lv8 107077 bushing, lv7/fat6x6/ee/lv8107085 bushing, lv7/ld p-0908951 water pump kit majconsisting of 13 item, lv7/ld b-8780511 hose assy-aircomp drain to crankcase, lv7/mpvy 765-50-2783/84cap, lv7/mpvy 115-43-0032-1 engine harness, lv7/mpvy640-03-1612-1 intermediate pipe, lv7/mpvy 640-03-1611-1 bend pipe, lv7/mpvy 101-107 expansion valve, lv7/mpvy 007-0029-00 pcb-gl-w153 24v, lv7/mpvy 115-43-0057-1 indoor light and fan harness, lv7/mpvy012-l006-00 stop valve - 5/8, lv7/mpvy f-8500910 pipeassy powder coated, lv7/sac10x10wc/al p-5104922seal kit hor. outrigger cylinder, lv7/sac10x10wc/al pk100004 thermostat aitf 5024v, lv7/sac10x10wc/al p-5104918 seal kit columncylinder, lv7/sac10x10wc/al p-5104919 seal kitboom cylinder, lv7/sac10x10wc/al ppt00001 sump /oil pan gasket, lv7/sac10x10wc/al p-5104923 sealkit vertical outrigger cylinder, lv7/stlnvf x-7820900 sun visor, lv7/sac10x10wc/al p-5104924seal kit pulling cylinder, 43/i-43/akl b6518525delivery pipe with hose, 43/i-43/akl b6518515 pumpassy, 43/i-43/akl b6518558 water level indicatorassy, k7 p-2600642 ball valve ss ic 76.2 mm, k7 f-1500132 impeller for tff large mk-v mtd on al*, k74210720259466 icn-4210002957 hose non metalic cpl

Related Searched Keywords : tee clamp

List of tee-clamp Tenders

Get tee clamp Tender Alert...

Related Searched Keywords : tee clamp

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us