Filters

List of technical-service Tenders

List of latest technical-service Tenders in Indian Tenders. Click on any technical-service Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for technical-service Tenders.

All-Tenders (132)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government And Public Sector

TRN :35767320 | 11 Nov, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for request for proposal for establishment of lan infrastructure including managed support services with technical for 03 years lan networking work

Central Government/Public Sector

TRN :35767987 | 11 Nov, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for manpower outsourcing services - minimum wage - skilled; iti; non-it technical

Central Government/Public Sector

TRN :35768276 | 22 Nov, 2025

Tender Value : 13.25 Lacs

Kavaratti - Lakshadweep

Tender for gem bids for manpower outsourcing services - minimum wage - highly-skilled; graduate; non-it technical, manpower outsourcingservices - minimum wage - highly-skilled; graduateelectrical engineer; others

Central Government/Public Sector

TRN :35768575 | 10 Nov, 2025

Tender Value : 2.37 Crore

Bangalore - Karnataka

Tender for gem bids for manpower outsourcing services - minimum wage - skilled;as per nit; non-it technical, manpower outsourcingservices - minimum wage - highly-skilled; as per nit; non-it technical

State Government

TRN :35768984 | 11 Nov, 2025

Tender Value : 0

Jalna - Maharashtra

Tender for gem bids for multifunction machine mfm v2 q2, entry and mid leveldesktop computer q2, entry and mid level laptop -notebook q2, high end laptop - notebook q2, lineinteractive ups with avr v2 q2 * * // ./ ./ % %/years of past experience required forsame/similar service3 year s 2 2 % % 8 8 /mse exemption for years ofexperience and turnoverno& % & % 2 2 % % 8 8 /startup exemption for years ofexperience and turnoverno 9 9 & & /document requiredfrom sellerexperience criteria, past performance, certificate requestedin atc, oem authorization certificate, additional doc 1requested in atc, additional doc 2 requested inatc, additional doc 3 requested in atc, additional doc 4requested in atc, compliance of boq specification andsupporting document*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer; ; > > ? ? & & @ @ ? ? b b? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no d /bid number: gem/2025/b/6847579? /dated: 01-11-2025 & & / bid document1 / 27 & & m m d d / minimum number ofbids required to disable automatic bidextension3? ? d d, , . . -- / / number of days for which bidwould be auto--extended3 ; @ ; @ ? ? ? ? / /number of auto extension count1 8 % 8 % /past performance80 % r %r % ?9 ?9 ? ? /bid to ra enabledno 8 8 /type of bidtwo packet bid8 8 t t /primary product categorymultifunction machine mfm v2 u u & w & w /time allowed for technicalclarifications during technical evaluation2 days / / m m x x / / 8 8 / % % @ @ > > /inspection required byempanelled inspection authority / agenciespre-registered with gemnopayment timelinespayments shall be made to the seller within 11 days ofissue of consignee receipt-cum-acceptance certificatecrac and on-line submission of bills this is insupersession of 10 days time as provided in clause 12 ofgem gtc u u x x /evaluation methodtotal value wise evaluation z & z & /arbitration clauseno /mediation clauseno //bid details /emd detail b /advisory bankstate bank of india /emd amount150000 /epbg detail b /advisory bankstate bank of india 8 %/epbg percentage%0.01 m /duration of epbgrequired months.122 / 27 a. 2 % & 8& % & % 8 b ^ r /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , / @ ? / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : pa to sp jalnaoffice of the superintendent of police jalna, home department maharashtra, jalna police, pa to sp jalna ? / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the productoffered in the bid themselves or through resellers should have regularly, manufactured and supplied same or

State Government

TRN :35769364 | 13 Nov, 2025

Tender Value : 0

Gir Somnath - Gujarat

Tender for gem bids for binding and stitching services - binding and stitching; gluedbinding perfect binding; technical book and dockets /

State Government

TRN :35770171 | 22 Nov, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for gem bids for selection of laboratories for testing of products/material -minerals; buyer to use custom filter to input technicalspecification of the product/material so that service providermay provide price offering accordingly; number; chemical /

Central Government/Public Sector

TRN :35770274 | 08 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for manpower outsourcing services - minimum wage - skilled; iti; others , manpower outsourcing services - minimum wage - semi-skilled; secondary school; non-it technical , manpower outsourcing services - minimum wage - unskilled; secondary school; others

Central Government/Public Sector

TRN :35756662 | 10 Nov, 2025

Tender Value : 37.4 Thousand

Allahabad - Uttar Pradesh

Tender for gem bids for toilet cleaner liquid v3 conforming to is 7983 q4 conforming to is 8540 q3, household insecticides v2 q3 deodorizer block v2 q3, toilet soap, liquid v3 conforming to is 4199 q4 toilet brush v2 q4, cleaning duster v3 q3 * * // ./ ./ % %/years of pastexperience required for same/similar service2 year s 1 1 % % 7 87 8 / mse exemptionfor years of experience and turnoveryes | complete& % & % 1 1 % % 7 7 / startupexemption for years of experience and turnoveryes | complete : : & & /document required from sellerexperience criteria, past performance, bidder turnover, certificate requested inatc*in case any bidder is seeking exemption from experience / turnover criteria, thesupporting documents to prove his eligibility for exemption must be uploaded forevaluation by the buyer< < > > ? ? @ @ & > & > a a > > @ @ c c? ? % % /do you want toshow documents uploaded by bidders to all biddersparticipated in bid?yes documents submitted as part of a clarification or representation during thetender/bid process will also be displayed to other participated bidders after login & & g g h h /minimum number of bids required to disable automatic bidextension3@ >@ > h h, , . . -- / /number of days for which bid would be auto--extended3 h /bid number & & / bid document1 / 13 < a < a @ @ @ @ / / number of autoextension count1 7 % 7 % /past performance50 % n %n % @: @: @ @ /bid to ra enabledyesn %n % o o /ra quali cation ruleh1-highest priced bid elimination 7 7 /type of bidtwo packet bid7 7 q q /primary product categorycleaning duster v3 r r & t & t /timeallowed for technical clarifications during technicalevaluation2 days / / g g u u / / 7 7 / % % a > a >? ? /inspection required by empanelled inspectionauthority / agencies pre-registered with gemno r r /estimated bid value37410 r r u u /evaluation methodtotal value wise evaluation w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail g /requiredno /epbg detail g /requiredno @ / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes @ : a 7, @ r l1+x% a / purchase preference to mii sellers availabeleupto price within l1+x%20 @ a 7 7 / maximum percentage of bid quantity for mii purchasepreference50 /mse purchase preference2 / 13 /mse purchase preferenceyes \ ^ % a 7, @ r l1+x% a / purchase preference to mseoems available upto price within l1+x%15 \ ^ a 7 7 / maximum percentage of bid quantity for msepurchase preference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibility criteria ofexperience criteria as defined above subject to meeting of quality and technical specifications. the bidder seeking exemption from experiencecriteria, shall upload the supporting documents to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibilitycriteria of bidder turnover as defined above subject to meeting of quality and technical specifications. if the bidder itself is mse oem of the offeredproducts, it would be exempted from the oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria of experience criteria as defined abovesubject to their meeting of quality and technical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria of bidder turnover as defined above subjectto their meeting of quality and technical specifications. if the bidder is dpiit registered oem of the offered products, it would be exempted from theoem average turnover criteria also subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid themselves orthrough resellers should have regularly, manufactured and supplied same or

Related Searched Keywords : technical service

List of technical-service Tenders

Tender for request for proposal for establishment of lan infrastructure including managed support services with technical for 03 years lan networking work

Tender for gem bids for manpower outsourcing services - minimum wage - skilled; iti; non-it technical

Tender for gem bids for manpower outsourcing services - minimum wage - highly-skilled; graduate; non-it technical, manpower outsourcingservices - minimum wage - highly-skilled; graduateelectrical engineer; others

Tender for gem bids for manpower outsourcing services - minimum wage - skilled;as per nit; non-it technical, manpower outsourcingservices - minimum wage - highly-skilled; as per nit; non-it technical

Tender for gem bids for binding and stitching services - binding and stitching; gluedbinding perfect binding; technical book and dockets /

Tender for gem bids for selection of laboratories for testing of products/material -minerals; buyer to use custom filter to input technicalspecification of the product/material so that service providermay provide price offering accordingly; number; chemical /

Tender for gem bids for manpower outsourcing services - minimum wage - skilled; iti; others , manpower outsourcing services - minimum wage - semi-skilled; secondary school; non-it technical , manpower outsourcing services - minimum wage - unskilled; secondary school; others

Get technical service Tender Alert...

Related Searched Keywords : technical service

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us