Filters

List of surface-box Tenders

List of latest surface-box Tenders in Indian Tenders. Click on any surface-box Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for surface-box Tenders.

All-Tenders (35)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

Central Government/Public Sector

TRN :35764899 | 11 Nov, 2025

Tender Value : 10.14 Lacs

Ernakulam - Kerala

Tender for gem bids for adhesive flags paper colour four colour size 1 inch x 2 inch100 numbers sheets of each colour in a packet adhesiveflag plastic five colour size 05 inch x 2 inch 100 numbersheets of each colour in a packed attendance register longbest quality writing minimum white paper not less than 330x 210mm and 100 pages art line drawing pen 01 0305 07mm automatic air freshner refill binder clip 32mm12 clips in a packet binder clip 25mm 12 clips in a packet binder clip 19mm 12 clips in a packet blade 7 o clockpacket have 10 blades box file large size glass mediumset of 6 nos transparent 350 ml calculator ordinary 12digit cd mailer wallet type for cd dvd size 16cm x 13cm x1 cm good quality in a packed cd rewritable cd markerpen cd writeable cello packing tape brown size 2 inch 65mtr long cello tape transparent size 05 inch 65 mtr long cello tape transparent size 1 inch 65 mtr long cello tapetransparent size 2 inch 65 mtr long cello tape red of size05 inch 65 mtr long cello tape green size 05 inch 65 mtr cello tape blue size 05 inch 65 mtr long checking pencilscolour blue 10 nos in packet paper clips gem clips 35mmstainless steel u clips 200 pieces for holding loose papers paper clips gem clips 55mm stainless steel u clips 200pieces for holding loose papers glass surface cleaner 500ml correction fluid pen type cleaning duster cloth 450gsm white colour size 22 inch x 22 inch duster cloth for pc black dvd rw 47 gb disc 4 x speed dvd rewritable black recordable dvd 47 gb dak folder fuax leather withprinting office name and logo envelope cover green coloursize a4 with inner cloth envelope cover green colour sizelegal with inner cloth envelope cover green colour size 95inch x 45 inch envelope cover green colour size 12 inch x10 inch envelope cover green colour size 10 inch x 45inch envelope cover green colour size 105 inch x 15 inch bid number gem2025b6685507 dated 31-10-2025 bid document1 74 1 1 , envelope cover brown colour size 9 inch x 4 inch, envelope cover brown colour size 16 inch x 6 inch, envelope cover green colour size 16 inch x 6 inch, envelopecover green colour size 6 inch x 5 inch, envelope covergreen colour size 16 inch x 12 inch with cloth, envelopecover green colour size 18 inch x 14 inch with cloth, envelope cover white colour size 9.5 inch x 4.5 inch, erasernon dust big pack of 10 nos, royal executive bond papera4 size 90 gsm 500 sheets per ream, fevistick 15 grams, fevicol 100 grams, file cover white printed size 370mm x250mm alongwith mes logo printed on folder, file coverwhite alongwith mes logo printed on folder, file coverprinted size 370mm x 250mm alongwith mes logo printedon folder, l folder, paper clips gem pins u pins file clipsfor office multi colored packed of 100 nos, hand book plain100 pages, high lighter pen size 4 inch x 1 inch five coloursin each set, mouse pad, cd dvd ohp marker permanentall colour pack of 10 nos, paper pin t type size 20mmlength, 0.7mm dia, weight of packet not less than 50 gms, plain fax paper rolls, roll for panasonic replacement roll film70 mtr x 2 rolls, steel paper cutter blade 1 inch 18mmmetal grip hand-held paper cutter set of 10, steel papercutter 1 inch knife cutter good quality with 18mm blade withsteel body, paper punch hdp 1320 colour may vary in amake kangaroo, parcel cloth khadi white, paste in stickpad 3 colours florescent each colour not less than 40 sheetssize of sheets is 1.5 inch x 2 inch, paper weight, paste instick pad 3 colour florescent each colour not less less than40 sheets size of sheets is 3 inch x 3 inch, paste in stick pad3 colour florescent each colour not less less than 40 sheetssize of sheets is 4 inch x 4 inch, pen blue 10 nos in a packet, pen black 10 nos in a packet, pen red 10 nos in a packet, pen add gel point type fine and line size 0.5mm modelachiever blue colour, pen add gel point type fine and linesize 0.5mm model achiever black colour, pen add gel pointtype fine and line size 0.5mm model achiever red colour, pen hi tech point 0.5 luxor pilot v7 black colour cartridgetype, pen hi tech point 0.5 luxor pilot v7 blue colourcartridge type, pen hi tech point 0.5 luxor pilot v7 redcolour cartridge type, pen hi tech point 0.5 luxor pilot v7green colour cartridge type, pen butter flow ball pen0.7mm 10 pen in one packet, pen white board marker black, pen white board marker blue, pen white board markerred, pen stand for officers, pen stand, pencil apsara eachpacket consist of 10 pencils, drawing pencil b platinumeach packet consist of 10 pencils, battery 1.5v aaa size10.5mm dia, battery 1.5v aa size 10mm dia, pencilsharpener, pencil sharpener long point size approximately7 x 12 x 12 cm, stapler pin 24 x 6mm leg of length 6mm1000 nos stapes in each box, stapler pin 10mm 1000 nosstapes in each box, plotter paper 36 inch x 91 cm x 100mtr 80 gsm core size 3 inch 3 core, pocha cloth with mobstick scrotch brite, plotter paper 36 inch x 91 cm x 50 mtr80 gsm core size 3 inch 3 core, plotter tracing paper 36inch x 91 cm x 150 mtr 80 gsm core size 3 inch 3 core, poker wooden handle, refill for add gel pen blue colourpack of 20 refill, refill for add gel pen black colour pack of20 refill, ruled register long 1 qr best quality writingpaper minimum white paper not less than 330 x 210mmand 100 pages chlorine free paper including cover, ruledregister long 2 qr best quality writing paper minimumwhite paper not less than 330 x 210mm and 158 pageschlorine free paper including cover page, ruled registerlong 3 qr best quality writing paper minimum white paper //bid details2 / 74 not less than 330 x 210mm and 240 pages chlorine freepaper including cover page, ruled register long 4 qr bestquality writing paper minimum white paper not less than330 x 210mm and 320 pages chlorine free paper includingcover page, ruled register long 5 qr best quality writingpaper minimum white paper not less than 330 x 210mmand 380 pages chlorine free paper including cover page, room freshener 200 ml bottle, rotating isograph ink penthickness 0.3mm, rotating isograph and variant drawingink 23ml bottle black, tia crafts 12inch 30cm stainless steelruler scale long double side measuring tool for architectsengineers 12 inch, 30 cm, stainless steel, scissors size 6inch good quality, scissors size 12 inch good quality, sketch pen set 12 nos in packet with different colours, stamp pad, stamp pad ink, stapler hd 45, kangaro size10 mm, spiral roll all size, stapler large size ds12s 17, stick folder file a4, tag white cotton large, tag bestquality nylon large, tag small, towel for revolving chair big, tracing paper a3 size, tracing paper a4 size, traymedium size, twine jute nylon in a make, wall clock, photocopier paper a3 size 80 gsm superior quality, photocopier paper a4 size 80 gsm superior quality, photocopier paper legal size 80 gsm superior quality

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35770160 | 12 Nov, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led bulb 9w 220-240 volt ceiling fan 1200mm sweep with electronic regulatorconforming to is switch socket combination 6 amp 240vwith gang box isi marked switch socket combination 15amp 240v with gang box isi marked pedestal fan 400mmsweep wall mounted fan 300mm sweep conforming to is socket 3 oblique 6 pin 5 obliqu 15 amp 240v isi marked exhaust fan 300mm sweep conforming to is mcbdistribution box 8 way conforming to is 13032 mcb 20amp sp 240 volts angle holder bakelite isi marked concertina coil 1050mm dia hdpe sand bags of size14inch x 36inch weight not less than 60 gms led securitylifgt fitting 20 watts security light fittings for 65w led plywood commercial bwr grade isi marked of size 8ft x 4ftx 12mm thick bib cock fancy type 15mm long nozzle cpbrass mirror for gents of size 30inchx 15inch x5mm thick pvc connection pipe 15mm dia 450mm long with both sidenut and washer jet spray teflon tape 3 oblique 8 inchwide 10 mtr roll gun metal gate valve 25mm m painingbrush 100mm standard quality cp towel rail 600mm long20mm dia with bracket bricks sub class b old size bestlocally available minimum compressive strength 75 kgoblique sqcm water absorption not more than 20percentage app water proofing membrane 3 mm thick 1mwide 10 m long long angle iron picket of size 18 mtrlength of size 2inch x2inch laip pendent holder bakelite isimarked led batten surface 4ft long 18w output 1600lumen per watt with suitable powder coated frame endcape and connector swtich piano 6 amp 240v isi marked cp cast copper alloy bib cock long body 15mm bore cpshower rose 75mm dia with swivel arm 15mm bore squareoblique round shape mcb 10 amp sp with enclosure boxmild steel mcb 32 sp 240 volts mcb 40 amp sp 240 bid number gem2025b6848455 dated 01-11-2025 bid document1 63 0 0 volts, , mcb 63 dp 240 volts, , bulk head fitting in deepdrawn anodized aluminum body, epoxy powder coated andhead resistant prismatic glass cover with specially., waterdespencer 20 ltr make voltas, vitreous china pedestalpattern water closet european type ewc inclk pvc seat andcover, nylon rope 32mm, vitreous china wash hand basinof size 550mm x 400mm, pvc insulated sheathedunarmored cable 6sqmm twin core aluminum conductor isimarked with working voltage upto 1100 volt roll of 90 mtrs, flexible cable twin twisted roll of 90 mtr 23 oblique 0.0040, conforming to is, pvc sheathed unarmored strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll, tripple layer hdpe water storage tankcylindrical vertical with closed top 1000ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 500ltrscapacity conforming to is specification, 1 hp motor, nonskid ceramic colored tiles of size 600mm x 600mm x 9 to10mm thick, sheated unarmored stranded copperconductor cable of size 1.5sqmm conforming to isiconductor cable to size 1.5sqmm conforming to isi marked90m roll, flood light 200 watt, ppgi profiled sheet of size10ft x 3.5ft, 0.50mm thick, mild steel corrugatedgalvanized cgi sheet 8ft x 3ft, .63mm thick isi marked, ordinary portland cement 43 grade in hdpe bags of 50 kgseach, confirming to is 269-1976, m seal 100gm, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 4sqmm conforming to isi marked 90m roll, thinner forpaint, tarpentin oil, paining brush 75mm standard quality, painting brush 50mm standard quality, coarse sanddimapur sand conforming to is 383 to1978., coarseaggregate crushed stone 20mm graded conforming to is383 to1979, plywood commercial bwr grade isi marked ofsize 8ft 4ft x 19mm thich, cp cast copper alloy stoop cock15 mm bore, mild steel hard drawn wire mesh 50 x 50mmpitch 3mm dia of wire, weight not less that 2.20 kg per, white cement, tirpolean plastic 30 x 30, tirpolean plastic24x18, pvc swr pipe 75m dia 3m long with socket end isimarked, pvc swr pipe 110m dia 3m long with socket endisi marked, pvc l bow 4 inch, pvc t 4 inch, pvc socket 4inch, pvc l bow 3 inch, pvc t 3 inch, pcv socket 3 inch, pixel bulk head fitting in deep drawn anodized minimumbody, epoxy powder coated and heat resistant prismaticglass cover with specially, change over switch 63 amp fourpole, change over switch 100 amp four pole, 25 ltr waterstrong geyser plastic body with all accessories forinstallation, pvc insulated sheathed unarmoured cable10sqmm twin core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtr, insulationtape 3 oblique 8 inch wide 9 mtr roll, mild steel wire nailssorted size, gi binding wire 3mm dia, curtain rod mscp20mm dia 12ft long, bracket for curtain rod aluminiumpowder coated curtain rod in white colour 20 oblique 25mmdia, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality red colour, synthetic enamel paint high glosssuperiour quality yellow colour, synthetic enamel painthigh gloss superiour quality og colour, synthetic enamelpaint high gloss superiour quality white colour, plywoodcommercial bwr grade isi marked of size 6ft x 3ft x 12mmthick, cp cast copper alloy pillar cock 15mm, batten holderbakelite, vitreous china urinal pot bowl type including //bid details2 / 63 spreader, solvent cement for pvc pipe, distemper paintemulsion oblique acrylic distemper, pvc flexible ribbed pipe20mm dia

Central Government/Public Sector

TRN :35757945 | 10 Nov, 2025

Tender Value : 0

Sonitpur - Assam

Tender for gem bids for living, offr living shelter of light gauge steel frame structure water storage tank triple layer 2000 ltrs fabrication fromstructural steel section for staging of water storage tank ewc european type decorative oval shape looking mirror chromium plated toilet paper holder with flap brasschromium plated towel rail chromium plated piller cockswan neck with aerator and butter fly handle stop cockangular type chromium plated brass 15 mm stop cock ttype chromium plated brass 15 mm brass chromiumplated shower rose 100 mm dia with bend bib cock longspout brass chromium plated 15 mm pvc connection 45cm long 15 mm peg set of six fitted with galvanised screwsalong the internal surface of the walls in the rooms cornersheet glass shelf with two shelf assembly soap dish ssflat back complete with screw pvc waste pipe 32 mm and1m long chromium plated waste coupling 32 mm dia cpgrating 100 mm dia with hole for waste pipe non skid antiskid vitrified floor tiles material and labour glazed ceramictiles ceramic tiles cp grating 100 mm dia without hole forwaste pipe pvc pipe 110 mm dia 3 mtr long pvc socket110 mm dia pvc bend110 mm dia s trap vitreous china vitreous china wash hand basin white brass cp wall mixerfor mixing hot and cold water brass cp jet water spray forewc plastic dustbin of capacity 10 ltrs dwcp double wallcorrugated pipes 3000 ltrs anaerobic frp lldpe septictank b and r items qty as per store list ser no 34 to 55 asper site reqmt distribution box 8 way spn 240 volts mcbspn 240 volts 32 amps mcb sp 6 to 32 amps pvc tape19mm wide 5 m long cable pvc insulated electric cablesheavy duty 1100 volts 15 sqmm single core cable pvcinsulated electric cables heavy duty 1100 volts 4 sqmmsingle core cable pvc insulated electric cables heavy duty1100 vots 25 sqmm single core pvc casing capping of bid number gem2025b6841755 dated 30-10-2025 bid document1 58 1 1 size 1 inch medium grde, pvc casing capping of size 3oblique 4 inch medium grade, switch piano 5 amp 230volts flush type two way, switch piano 5 amp 230 voltsflush type one way, led tube light fittings 20 wrechargeable 230v, led mirror lights 1 feet 5 watts, screwfull thread 6 x 19 mm 200 nos pkt, pvc switch board size 7x 4 inch for sockets and switches, pvc switch board size 8 x10 inch for sockets and switches, pvc l bend and t junctionjoint, switch socket combination snow white multipurposetwo in one 15 amp 230 volts, switch socket combinatione 5amp 230 volts, service bracket 40mm dia gi tubingmedium grade 1.5 mtr long with led street light 50w, service cable pvc insulated aluminium conductor 1100 voltgrade heavy duty 10 sqmm 2 core, service cable pvcinsulated aluminium conductor1100 volt heavy duty 50sqmm 3.5 core, ceiling rose three terminal snow white, led bulk head fitting high pressure with led lamp 10 watts, pvc flexible wire copper conductor multi stranded, pvcflexible conduit pipe 15 mm dia, pvc round and squireblock, fire extinguisher of two kilogram capacity, ceilingfan 1200mm, electric geyser 5 star of capacity 25 ltr, exhaust fan 230 volts 300 mm, main switch 63 amps 4 poletpn, led blub 10w, angle holder, earthing plate 600 x600 x 6 mm, ci earth pit cover of size 300 x 300 x 6 mmwith angle iron, funnel fitted with 20 mm diameter gi pipe1.5 m long, gi wire 4 mm diameter, charcoal, salt normal, air termination single pointed aluminium rod 12 mm diaand 300 mm long., testing point terminal block make ofgun metal and phosphorus bronze size 75 x 75 x 25 mmdrilled, aluminium strips 25 x 3.0 mm, galvanized ironstrip 32 x 6 mm, insulating pvc block 75x75x30 mm, individual standalone plastic body smoke alarm, individualstandalone plastic body heat alarm, fire wall extinguisherof 1.3 kg, bed hard steel with mattress, steel bed sidelocker of size 1520mm x 1000mm x 450mm, study chairof size length 56 cm, height 82 cm and width 56cm, studytable of size 4x2 wooden top on round tube structure withthree drawers unit, looking mirror of selected qualityframeless of size 600 x 450 x 5 mm, water dispenser of230 v 500 watts without refrigerator, plastic dustbin ofcapacity 40 ltr

Central Government/Public Sector

TRN :35759631 | 20 Nov, 2025

Tender Value : 7.53 Lacs

Raipur - Chhattisgarh

Tender for gem bids for chemical, diisopropylamine sigma- 471224 - 100 ml, 2- methoxyethanol sigma - 284467 - 100 ml, dextran fromleuconostoc spp. sigma - 31388 - 25g, indium tin oxidecoated glass side -ito sigma- 636908-10pak, neoprenedry-box gloves z170062-1pak, aluminum oxide sigma-229423-25g, lithium nitrate sigma- 229741-25g, nickelnitrate sigma- 72252-50g, citric acid monohydrate sigma-c1909-500g, phosphate buffered saline sigma - p4417 -50tab, polyethylene glycol 400 for synthesis 00259 00500, acetic acid sigma - 695092 -500 ml, sodium acetate sigma- 241245 -100g, sodium hydroxide sigma - 10649800500 -100g, ethanol ar 99.9 percent loba - 2.5 ltr, bismuth - iiinitrate pentahydrate sigma- 467839 - 50g, aluminumisopropoxide sigma- 220418 - 100g, hydrochloricacid 35.4 percent ar loba -2.5 ltr, teflon lined sshydrothermal reactor 100 ml, 2-propanol sigma- 190764-1l, azo ar grade spin coating ink 25ml, ptfe syringefilter 0.2 micrometer, hydriodic acid -hi 57 percent ar250ml, hbr acid 48 percent extra pure 500ml, cscl 99.999percent trace metals basis 10g, pbbr2 ar grade 10g, titanium isopropoxide ar grade, 99.99 percent 25ml, titanium isopropoxide srl, 99 percent 500ml, methanol99.5 percent extra pure 1l, 5ml syringe, nickel nitratehexahydrate ar grade 20g, l-ascorbic acid 99 percentpure 500g, ethylene glycol 99 percent pure 500ml, rhodamine 95 percent powder 100ml, methylene blue dyecontent - 82 percent 25g, malachite green solution 100ml, mgcl2 acs reagent 100g, na2s2o3.5h2o acs reagent25g, teo2 99.9 percent trace metal basis 10g, na2seo3acs reagent 5g, naoh ar grade 98 percent 500g, zincacetate ar grade 99 percent 250g, sncl2.2h2o ar grade99 percent 100g, tx-100 laboratory grade 100ml, 2-methoxyethanol 99.8 percent pure 500ml, kapton tape 12mm, kapton tape 25 mm, na2so4-238597 ar grade 500g, beaker 100 ml highly thermally stable, beaker 250mlhighly thermally stable, beaker 500ml highly thermallystable, vial 10ml highly thermally stable, silver nitrate209139 - 99 percent pure 25gm, indium tin oxide - coatedglass slide size - 25 mm x 25 mm x 1.1 mm surfaceresistivity - 30-60 ohm per sq - 10 pkg, silver nitrate puritygreater than 99 percent, form -powder - 25gm, gallium - iiinitrate hydrate purity greater than 99 percent, form -powder - 25gm, hydrofluoric acid acs reagent, 48 percent- 500ml, pedot - pss poly 3, 4- ethylenedioxythiophene -polystyrene sulfonate ar grade - 25gm, polymethylmethacrylate - pmma - purity greater than 99 percent -25gm, n- dodecyl mercapton -ddt - purity greater than 99percent - 500ml, thioacetamide purity greater than 99percent - 100gm, cobalt chloride hexahydrate puritygreater than 99 percent - 25gm, tetracycline puritygreater than 99 percent - 5gm, pfoa - perfluorooctanoicacid purity greater than 99 percent - 5gm, atrazine puritygreater than 99 percent - 5gm, glyphosate purity greaterthan 99 percent - 5gm, selenium metal powder oxford ar, 99.99 percent - 100gm, ammonium molybdatetetrahydrate acs reagent, 99.98 percent trace metal basis- 50gm, nickel acetate tetrahydrate 98 plus percent -100gm, ascorbic acid bioxtra, greater than99.0 percentcrystalline - 25gm, aquivion - 802557-25 ml borosilicateglass, 25 ml capacity, sample glass vials borosilicateglass, 25 ml capacity, ti3alc2 max phase powder 50gm, hf2pbc max phase powder 25gm, zr2alc max phase //bid details2 / 53 powder 25gm, ti2alc max phase powder 25gm, lif 50g, tmaoh 250 ml

Central Government/Public Sector

TRN :35745319 | 19 Nov, 2025

Tender Value : 67.28 Lacs

Kottayam - Kerala

Tender for gem bids for sitc crs radio station transmitter of 50 w fm set 1 plus 1 , sitc of self supported transmission tower , vhf transmitting antenna , low loss feeder cable with n connector , studio monitor speaker , on air broadcast console etc , dynamic cardioid microphone , portable solid state field recorder , headphones , broadcast audio processor , dummy load with connector , extra lightening protection circuit , 19 equipment rack ht 5 ft mts equivalent , work station with antivirus for 3 years , audio editing software , automation scheduling software licence , condensor microphone with wind filter and arm stand , audio distribution amplifier , headphone distribution amplifier , 10 kva online ups , xlr 6 microphone junction box , professional audio line cable , professional microphone cable , xlr connecter male and female , trs stereo connecter , professional on air studio light , digital clock with time , supply and fixing of work station table , supply and fixing of vob table , supply and fixing of discussion table l shape , supply and fixing of on air table and side table , supply and fixing of shoe rack , supply of low frequency acoustic treatment , supply of acoustic treatment , teak board skirting , supply of observation window2 , supply of sound proof door with frame chaukhatt , supply of executive chairs revolving, standard , supply of visitor chairs revolving, standard , t.v 56 inch standard led type ips panel , sitc of vrv vrf 10.0 hp odu , sitc of cassettee unit 1.0hp , sitc of cassettee unit 2.0hp , sitc of cassettee unit 2.5hp , sitc of remot , supply, installation, testing and commissioning of y joints , supply and fixing of refrigent copper pipe with insullation , supply and fixing of refrigent conduit pipe 25mm pvc , internet works sitc of optic fibre cable 6 core sm , sitc of patch cord ofc - 3 meter sc-lc , sitc of pigtail ofc - 1 meter , sitc of cat-6a cable , sitc of 19 inch 6 u rack , sitc of lan system , sitc of liu 12 port , sitc of patch cord cat-6 -1 meter , sitc of patch cord cat-6 -2 meter , sitc of patch cord cat-6 -10 meter , supplying and fixing io box alongwith base and cover plate , sitc of cctv camera with night vision - 5 mp , supply and fixing of cat-6 wire in pvc conduit , sitc of cctv camera , fire work sitc talk back slave station , sitc smoke detector with built in led , sitc 6 kg powder type fire extinguishers , citc 2 kg powder type fire extinguishers , sitc addressable manual call point complete as required. , civil works as per boq , cement work as pe boq , providing and laying in position cement concrete of specified grade , double charge vitrified tiles , centering and shuttering , steel reinforcement for r.c.c. work , smooth finishing of the exposed surface of r.c.c. work , brick work with common burnt clay , 12 mm cement plaster of mix , wood frames of doors, windows, clerestory windows , isi marked flush door shutters , polishing in high gloss matt finish melamine , bright finished brass hanging type floor door stopper , false ceiling with cove and design at all height , providing and applying white cement based putty , wall painting with acrylic emulsion paint , 2mm thick pvc mat finished on floor of approved design , sitc of vertical blinds , electrical works , wiring for light point etc , wiring for circuit , supplying and fixing following modular switch etc , supplying and fixing following modular switch socket , supplying and fixing following modular switchs , supplying and fixing modules , supplying and fixing following way , supplying and fixing miniature circuit breaker , miniature circuit breaker suitable for inductive load , supplying and fixing single pole blanking plate , supplying and fixing of following sizes of medium class pvc conduit , supplying and fixing suitable size gi box wih modular plate , frls pvc insulated copper conductor , frls pvc insulated copper conductor 2 , frls pvc insulated copper conductor3 , frls pvc insulated copper conductor,4 , 3x2.5 mm flexible wire for connection , wiring for group controlled , led 2x2 luminaire 36w , recess mounted led downlighter , electrical earthing sitc crs radio station transmitter of 50 w fm set 1 plus 1, sitc of self supported transmission tower , vhf transmitting antenna, low loss feeder cable with n connector, studio monitor speaker , on air broadcast console etc, dynamic cardioid microphone, portable solid state field recorder, headphones, broadcast audio processor, dummy load with connector, extra lightening protection circuit , 19 equipment rack ht 5 ft mts equivalent, work station with antivirus for 3 years, audio editing software, automation scheduling software licence, condensor microphone with wind filter and arm stand, audio distribution amplifier, headphone distribution amplifier, 10 kva online ups, xlr 6 microphone junction box , professional audio line cable, professional microphone cable , xlr connecter male and female, trs stereo connecter, professional on air studio light, digital clock with time , supply and fixing of work station table , supply and fixing of vob table , supply and fixing of discussion table l shape, supply and fixing of on air table and side table , supply and fixing of shoe rack , supply of low frequency acoustic treatment , supply of acoustic treatment , teak board skirting , supply of observation window2 , supply of sound proof door with frame chaukhatt, supply of executive chairs revolving, standard, supply of visitor chairs revolving, standard, t.v 56 inch standard led type ips panel, sitc of vrv vrf 10.0 hp odu , sitc of cassettee

Central Government/Public Sector

TRN :35749619 | 10 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for sheet bakelite , tape pvc , sheet bake , bell indication 12 way , pvc gang box , batten nails , pvc flexible , shadals various , telephone nails , plastic rawal plug , bulb 100 , false ceiling , bell cord less , bell indication , bus bar , electronic meter , fan hook , plug top 15 amp , pvc 200mm , pvc 250mm , pvc 300mm , pvc bulb holder angular type , pvc gang box 15 amp , hexa blade double ended , holder bipin rotraty , insulation tape , switch neon indicator , plywood mdf board 8x4x18mm , plywood , glass shelf , low level , pvc pipe 75mm , sink coupling 100mm , cp peg set of 06 , cp hand shower , curtain rod , pvc pipe 100mm , glass sheet frosted , waste pipe , door stopper , waste coupling , cp brass soap dish , handle aluminum 150mm , tower bolt ms 100 mm , bracket sider end doom , glass sheet clear , tower bolt , cp brass , bracket for fancy , mortice lock , aluminum hinges 100 mm , door seal 900mm long , grating cp , door seal 1200 mm long , thread for plumber , ms hinges 100mm , helical door spring , grating cp stainles , nipple hexa 15 mm , hamber drill bit , rawal plug , blade cutter iron , paper holder , m seal , washer for cistern , fevicol , ss handle , wire mesh , magnetic catcher , dr fixit , tarpentine oil , pvc ball , drip seal , angular stop cock , ms hasp and stapple , drain cover mm , drain cover , taflon tape , star bit for drill , glass shelf 600mm long , 15mm kitec elbow , 15mm kitec socket , 15mm kitec tee , 15mm kitec union , kitec connectore , electric insulation rubber mat , street light 120w , street light 90w , spot light green , spot light warm white , spot light cool white 12w , contractor 185 amp 415 v , contractor 40 amp 415 v , led recess , cable pvc 16 sqmm 1 core , cable pvc 2 point 5 sqmm 1core , cable pvc 1 point 5 sqmm 3 core , cable pvc 1 point 5 sqmm 1core , led lamp 12 watt , led lamp 9 watt , led recessed luminaire 12 watt , led surface celing , cable pvc flat , led spot light 12 , automatic star , dol starter , calling bell ding dong , insualtion tape , aluminium thimble 150 , aluminium thimble 400 , plug top 3 pin16 amp , modular fan regulator , switch board boxes 6 modular , aluminium inline , aluminium thimble , switch board boxes , cable jointing kit , aluminium inline connector 185 , modular bell push , aluminium inline connector 95 , aluminium inline connector , aluminuum thimble 95 , aluminium thimble 50 , aluminuum thimble 70 , pvc gang , aluminium thimble 35 sqmm , aluminium thimble 25 , insulation tape , batten holder 6 amp , connector 35 sqmm , inline connector , aluminium connector , junction box , bulb 100 w , industrial socket , aluminium inline 50 , pvc condute pipe 20 mm , pvc condute clamp , modular plate 3 module , modular plate 4 module , modular plate 6 module , hydraulic door closer , glass sheet , stainless steel curtain rod , glass sheet clear , copper sulphate , frame plate 6 module , aluminium door seal , nrv 150 mm , patchmat bitumen , cp brass extension nipple , hack saw blade double edge , brass nozzle 15 mm for fountain , frame plate 3 module , nrv 100 mm , hex nipple 20 mm x 50 mm , ht tape black roll of 20 mtr , brass spindle , particle board , brass nozzle , ms but hinge 100 mm , ball valve brass , hex nipple , bearing grease , magnetic door catcher , cp brass urinal , cp wall bracket l shape , insulated tape , cp end bracket , blanking plate , lime , industrial socket 63 amp , floor door closer , aluminim hasp and staple , wire clamp 10 mm , batten nail , pvc internal cistern10 ltr capacity , tank 1000 ltr , ss curtain rod , sliding bolt , cotton thread 1 pkt 60 pcs , aluminium sheet 1 mm thick , toilet seat covers (v2) (q4) , ptmt tap fitting (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type modular domestic fan regulator as per is 11037 (q3)

Related Searched Keywords : surface box

List of surface-box Tenders

Get surface box Tender Alert...

Related Searched Keywords : surface box

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us