Filters

List of ss-screen Tenders

List of latest ss-screen Tenders in Indian Tenders. Click on any ss-screen Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ss-screen Tenders.

All-Tenders (13)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35785490 | 24 Nov, 2025

Tender Value : 12.67 Lacs

Kheda - Gujarat

Tender for supply of various size of sleeves, fin flates, corten steel plate, ss wire screen & anchor bar for stage-iii of boiler unit no. 7 at wanakbori tps.

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35764163 | 14 Nov, 2025

Tender Value : 2.95 Lacs

Kanyakumari - Tamil Nadu

Tender for gem bids for 1424003 motor flange mounted 3ph 1 5kw 1500rpm, 912027 elastic support bar for sivtek tumblerscreen, 912026 top toggle type v clamp set ss304for sivtek tumbler screen, 905017 mesh deblindingkit for sivtek screen, 912032 nitrile rubber flat50x6 thick for orbit for tumbler screen, 912028nitrile rubber gasket for sivtek tumbler screen

Central Government/Public Sector

TRN :35765854 | 11 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for laptop 13 inch screen mp4 chip 16 gb memory oblique 512gb ssd, laptop 15 inch screen mp4 chip 16 gb memoryoblique 256 gb ssd, laptop 13 inch screen window, tablet 11 inch screen mp4 chip 512 gb wifi, tablet 11 inchscreen mp4 chip 256 gb wifi plus cellular

Central Government/Public Sector

TRN :35757301 | 10 Nov, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for laptop notebook ultra 7 processor, 32 gb ram, 13inch screen, warranty 3 year, 5mp ir camera, convertible enhanced by ai, laptop notebook, ultra 7 processor, 32gb ram, 1tb ssd, 2.8k oled 14inch touch screen, 3600 warranty 3 year, 5mp ircamera, desktop pc i5 12th gen 16gb ram, 512gbssd, win 11 pro, 21.5 inch screen, warranty 3 year, line interactive ups 1 kva dual battery, warranty 1year, computer kiosk 24 inch touch screen withops, warranty 1 year

Central Government/Public Sector

TRN :35736267 | 10 Nov, 2025

Tender Value : 0

Bulandshahr - Uttar Pradesh

Tender for gem bids for fan v belt c173, fan v belt b116, pressure gauge, temperature gauge, pre filter size 610x610x50, fine filter size 610x610x305, v belts for supply air100000 cmh, supply air fan bearings 100000 cmh, impeller for pump 100 cmh, pump shaft 100 cmh, angularcontact bearing 100 cmh, cylindrical bearing 100 cmh, shaft sleeves 100 cmh, gland packings for pumps 100cmh, spray nozzles 100 cmh, air washer pump 100 cmhinlet water strainer size 150 nb, brass suction screenstrainer for air washer tank 100 cmh, v belts for supply air50000 cmh, supply air fan bearings 50000 cmh, impellerfor pump 50 cmh, pump shaft 50 cmh, pump bearing 50cmh, shaft sleeves 50 cmh, gland packings for pumps 50cmh, spray nozzles 50 cmh, air washer pump 50 cmhinlet water strainer size 125 nb, brass suction screenstrainer for air washer tank 50 cmh, actuator for firedamper, motor 37 kw for fan for air washer unit 100000cmh, motor 18.5 kw for fan for air washer unit 50000 cmh, level transmitter, pressure transmitter, ball valve 25 mmastm a182 astm a105, 2 way valve manifold half inch ss, socket half inch ss

State Government

TRN :35714408 | 11 Nov, 2025

Tender Value : 0

Palghar - Maharashtra

Tender for gem bids for furniture, bid number gem2025b6802327 dated 27-10-2025 bid document1 42 1 1 staff chair mid back chair, table without cpu hanger, storwel plain, two seater waiting area chair providing andsupply powder coted, three seater waiting area chair, twodoor personal locker unit, four doorpersonal locker, sofathree seater, lshape cabin main table, cabin high backchair, cabin visitor chair, cafeteria table four seater, cafeteria table six seater, cafeteria chair, storageroomsmall, storageroomlarge, rectangularworkstation, pentagonal workstation penta, multipurposechair, single bed for staff rest room, single mattress forstaff bed, pillow with fabric upholstered, auditorium chair, cabin table main desk, cabin back unit for civil surgeoncabin, cabin main chair high back, cabin main chair midback, visitor chair, cabin sofa 3 seater for civil surgeoncabin, cabin sofa two seater for civil surgeon cabin, cabincoffee table for civil surgeon cabin, cabin corner table forcivil surgeon cabin, conference room table 12 seater, reception table, foldable wheel chairs, stretcher ontrolley, examination couch, five motorized bed in pp andtwin wheel lockable castors, mattress 100mm thick formotorized bed, infusion pole on bed in ss, bed side lockerwith pp top 1 drawer and 1 cabinet, over bed table in pltheight adjustable top on gas lift, ss top round stoolheight adjustable, advanced emergency crash cart, emergency recovery trolley, mattress for emergencyrecovery trolley, soiled linen trolley, instrument trolleywith bowl and bucket in ss, patient lifting pole, tractionpulley, three fold partition screen, instrument cabinet, mayos trolley, ldrp motorized bed, mattress 100mm, medicine cart with 7 drawers and medicine bins, crib ontrolley, mattress for crib 50mm thick with fire and waterresistance and bacterio static properties, fowler bed in pp, side rails for fowler bed 3 bar in ms, mattress for fowler100mm thick, iv pole on fowler bed in ss, bed side lockerin ms 1 drawer 1 cabinet with ss 304 top, gynaecprocedure table motorized, paediatric bed, mattress forpaediatric bed 75mm thick with fire and water resistanceand bacterio static properties, attendant bed in ms withoutcastors, mattress for attendant bed 100mm thick, oxygencylinder trolley

Central Government/Public Sector

TRN :35717438 | 07 Nov, 2025

Tender Value : 0

Gurdaspur - Punjab

Tender for gem bids for pvc water storage tank 1000 ltr make sintex or diplast orfinolex pvc water storage tank 500 ltr make sintex orfinolex or diplast pvc rain water pipe 110 mm 6m longmake finolex or supreme or kisan or tirpati urinalchinaware as per specx document kit for pvc low levelcistern as per specx document ci sluice valve 200 mm diawith ci wheel pn 1 point 6 isi marked pvc bend 110 mmbore as per sample finolax or supreme pvc float valve 20as per specx document pvc stop cock 15 mm makepollytuf or prayag pvc or ptmt showers 75 mm dia witharm 600 mm long pvc waste pipe 32 x 1150 mm for whbmake jainko or pollytuf or prayag indian toilet wc seat size580 mm x 440 mm ss single bowl with drainage board asper specx document pvc connection as per specxdocument kit for pvc low level cistern 10 ltr as per specxdocument lid for water tank of capacity 500 ltr with fittingarrangements pvc bathroom cabinet as per specxdocument lid for water tank of capacity 1000 ltr with fittingarrangements piano type hinges 30 mm wide flap cpurinal spreader cp knobs 25 mm for drawers as persample pvc pipes 15 mm dia 3 m long pvc bend 75 mmbore as per sample finolax or supreme pvc washer for bibtap and stop cock for 15 mm dia pvc lid for water tank500 by 1000 ltr cap with locking arrangment pvc rainwater pipe as per specx document urinal chinaware whiteas per specx document kit for pvc low level cistern 10 ltrcapacity white colour single flush type vitriuos china whb600 x 480 mm size make cera or hindware or parrry ware pvc self printed sheet as per specx document pvc plainsheet as per specx document pvc water tank lid 500 ltrsmake sintex or diplast or finolex hydraulic door closeruniversal as per specx document vitrious china ewc as perspecx document coarse aggregate 12 point 5 mm graded bid number gem2025b6791828 dated 28-10-2025 bid document1 83 1 1 pvc jet spray with flexible pipe as per specx document, pvc slow falling seat cover as per specx document, pvcshelf 450 mm as per sample, pvc long bend 32 mm borefor wc, ewc seat cover hinges, pvc laminated sheet asper specx document, pvc flexible waste pipe 32 mm boreas per sample, wash hand basin counter top ovel as perspecx document, pvc washer for bib tap and stop cock asper sample pack of 100, pvc stop cock 20 mm make polytufor prayag or shakti, pvc socket for 110 mm bore pipe, pvcsyphon washer for cistern, non skid coloured floor tiles 600x 600 x 9 mm off white, pvc flush pipe 32 mm dia as persample, pvc short bend 32 mm, pvc socket for 75 mmbore pipe, pvc tee 75 mm bore as per sample, pvc lid forwater tank 500 or 1000 ltr cap with locking arrangment, pvc float valve as per specx document, pvc jet spray withflexible pipe for ewc seat make cera or hindware orporryware, pvc waste pipe 32 x 1150mm for whb makejainko or pollytuf or prayag, plastic laminated sheet 8 feetx 4 feet x 12 mm thick teak face, looking mirror fordressing table gents as per specx document, plasticlaminated sheet 8 feet x 4 feet x 5 mm white face, pvc strap 110 mm, plastic laminated sheet 8 feet x 4 feet x 1mm white face, pvc kit for low level cistern 10 ltr capwhite colour or make prayag or polytuf, looking mirror fordressing table ladies as per specx document, leatherbuffalo, pvc ball cock 15 mm make prayag or polytuf, pvcball cock 20 mm make prayag or polytuf, pvc p trap 110mm, pvc insulated overall sheathed service cablealuminium conductor multi stranded 2 core 10 sqmm, pvcinsulated and overall sheathed armoured cable alumnconductor multi tranded 16 sqmm 4 core, socket 6a or 16aisi marked, 240v, 50hz piano type, plug top 3 pin 15 or 16amp make havells or crabtree or anchor, pvc insulationtape 20 mm x 25 mtr make steel grip, switch socketcombination 6a and 16a with neon indicator and 4 fixingholes 240v 50hz piano type, capacitor 3 point 15 mfd makeusha or havells or bajaj, plug top 3 pin 5 by 6 amp makeanchor or havells or hager or ssk or cona, frls pvcinsulated unsheathed multistranded 3 core copper cable ofsize 1 sqmm, switch piano type 6a 2 way isi marked 240v50hz, gang box with switch socket combination 15 by 16amp, epr ht insulation tape 50 mm wide 09 m long, frlsh pvc insulated, unsheathed stranded copperconductor single core flexible cable 1100 voltage grade ofsize 4 sqmm of red or black colour roll of 100 m, xlpeinsulated screened pvc bedded steel strip or wire armouredaluminum conductor 11000 volts grade of size 185 sqmm 3core, modular socket outlet 5 by 6 amp make anchor orindoasian, metal clad industrial plug socket 32 amp makehavells or philips or bajaj or anchor, metal clad industrialplug socket 20 amp make havells or philips or bajaj oranchor, male and female contact for 11 kv god 200 or400 amp rashtriya or jb or l and t set of 3, modular fanregulator step socket type make havells or anchor, angleholder, pvc insulated weather proof overall sheathedservice cable aluminium conductor of size 4 sqmm 2 coreroll of 100 mtr, modular socket outlet 15 and 16amp makebajaj or philips cg havells, change over switch 4 pole 100amp make havells or standard or c and s, modular socket16 amp make philips anchor, heating element for geysercup or thread type 2000w make aristo or thomson or bajaj, main switch tpn and fp 200 amp 25ka make havells orlegrand or schnedar, heating element for geyser triangularor round or cup or thread type 1500w make aristo or //bid details2 / 83 thomson or bajaj, change over switch 4 pole 63 amp fpand tp make havels or c and s or standard, main switch tp100 amp make havels or c and s or standard, strandedcopper cable 16 sqmm single core multi strand 1100 v isimarked make kalinga or plaza, ss combinationmultipurpose piano type 16a make anchor or philips orhavels, piano switch one way 05 or 06 amp make anchoror philips or havells, ss combination multipurpose pianotype 6 amp make anchor or philips or havels, main switchspn and tp 63 amp make havels or c and s or standard, piano type switch one way 15 and 16 amp make anchor orphilips or havels, cable copper conductor 3 core x 6 sqmmmake havells or paragaon or plaza, dbs double door busbar 100 amp 8 way spn isi marked make indoasian orhavelld or c and s, submersible cable copper conductor 3core x 10 sqmm make havells or paragaon or plaza, socketflush type 16 amps make anchor or philips or havels, modular pt switch 15 and 16 amp make anchor or philips orbajaj, socket flush type 6 amps make anchor or philips orhavels, dbs double door bus bar 100 amp 4 way spn isimarked make indoasian or havelld or c and s, piano switchtwo way 05 and 06 amp make anchor or philips or havels, ceiling rose 3 terminals make anchor or philips or havels, tape insulation 15 mm x 20 mtr long make steel grip oranchor, stranded copper cable 25 sqmm single core multistrand 1100 v isi marked make kalinga or plaza, switchbell push 6 amp make anchor or philips or havels //bid details3 / 83

Central Government/Public Sector

TRN :35706093 | 08 Nov, 2025

Tender Value : 0

Dehradun - Uttaranchal

Tender for gem bids for dslr / compact / handheld camcorder or video camerasv2 q2, camera carrying case, tripod for camera, ringflash led, standard flash for camera mounting, slaveflash units with reflector, background screen with stand, cheek retractors self retaining pediatric size, cheekretractors self retaining adult size, cheek retractors nonself retaining double ended ss, intra oral mirrors setcomprising occlusal adult occlusal pediatric lateral, ss traywith hd 12 x 15 size, cheatle forceps, upright chair withadjustable head rest

State Government

TRN :35706723 | 08 Nov, 2025

Tender Value : 0

Satara - Maharashtra

Tender for gem bids for 65 inch intractive flat panel with 8gb 128 gb aisupportive, stabilizer, branded desktop computeri3 8gb 512 ssd 21 point 5 inch screen 3 yearwarranty, ups, antivirus 3 years packege, powdercoated ms plate, wireless keyboard and mouse, pendrive 32 gb, e learning software 1st to 7th, scholarship software 5 th to 8th, music system 50watt

Related Searched Keywords : ss screen

List of ss-screen Tenders

Tender for supply of various size of sleeves, fin flates, corten steel plate, ss wire screen & anchor bar for stage-iii of boiler unit no. 7 at wanakbori tps.

Tender for gem bids for laptop 13 inch screen mp4 chip 16 gb memory oblique 512gb ssd, laptop 15 inch screen mp4 chip 16 gb memoryoblique 256 gb ssd, laptop 13 inch screen window, tablet 11 inch screen mp4 chip 512 gb wifi, tablet 11 inchscreen mp4 chip 256 gb wifi plus cellular

Get ss screen Tender Alert...

Related Searched Keywords : ss screen

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us