Filters

List of sliding-connector Tenders

List of latest sliding-connector Tenders in Indian Tenders. Click on any sliding-connector Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for sliding-connector Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35749619 | 10 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for sheet bakelite , tape pvc , sheet bake , bell indication 12 way , pvc gang box , batten nails , pvc flexible , shadals various , telephone nails , plastic rawal plug , bulb 100 , false ceiling , bell cord less , bell indication , bus bar , electronic meter , fan hook , plug top 15 amp , pvc 200mm , pvc 250mm , pvc 300mm , pvc bulb holder angular type , pvc gang box 15 amp , hexa blade double ended , holder bipin rotraty , insulation tape , switch neon indicator , plywood mdf board 8x4x18mm , plywood , glass shelf , low level , pvc pipe 75mm , sink coupling 100mm , cp peg set of 06 , cp hand shower , curtain rod , pvc pipe 100mm , glass sheet frosted , waste pipe , door stopper , waste coupling , cp brass soap dish , handle aluminum 150mm , tower bolt ms 100 mm , bracket sider end doom , glass sheet clear , tower bolt , cp brass , bracket for fancy , mortice lock , aluminum hinges 100 mm , door seal 900mm long , grating cp , door seal 1200 mm long , thread for plumber , ms hinges 100mm , helical door spring , grating cp stainles , nipple hexa 15 mm , hamber drill bit , rawal plug , blade cutter iron , paper holder , m seal , washer for cistern , fevicol , ss handle , wire mesh , magnetic catcher , dr fixit , tarpentine oil , pvc ball , drip seal , angular stop cock , ms hasp and stapple , drain cover mm , drain cover , taflon tape , star bit for drill , glass shelf 600mm long , 15mm kitec elbow , 15mm kitec socket , 15mm kitec tee , 15mm kitec union , kitec connectore , electric insulation rubber mat , street light 120w , street light 90w , spot light green , spot light warm white , spot light cool white 12w , contractor 185 amp 415 v , contractor 40 amp 415 v , led recess , cable pvc 16 sqmm 1 core , cable pvc 2 point 5 sqmm 1core , cable pvc 1 point 5 sqmm 3 core , cable pvc 1 point 5 sqmm 1core , led lamp 12 watt , led lamp 9 watt , led recessed luminaire 12 watt , led surface celing , cable pvc flat , led spot light 12 , automatic star , dol starter , calling bell ding dong , insualtion tape , aluminium thimble 150 , aluminium thimble 400 , plug top 3 pin16 amp , modular fan regulator , switch board boxes 6 modular , aluminium inline , aluminium thimble , switch board boxes , cable jointing kit , aluminium inline connector 185 , modular bell push , aluminium inline connector 95 , aluminium inline connector , aluminuum thimble 95 , aluminium thimble 50 , aluminuum thimble 70 , pvc gang , aluminium thimble 35 sqmm , aluminium thimble 25 , insulation tape , batten holder 6 amp , connector 35 sqmm , inline connector , aluminium connector , junction box , bulb 100 w , industrial socket , aluminium inline 50 , pvc condute pipe 20 mm , pvc condute clamp , modular plate 3 module , modular plate 4 module , modular plate 6 module , hydraulic door closer , glass sheet , stainless steel curtain rod , glass sheet clear , copper sulphate , frame plate 6 module , aluminium door seal , nrv 150 mm , patchmat bitumen , cp brass extension nipple , hack saw blade double edge , brass nozzle 15 mm for fountain , frame plate 3 module , nrv 100 mm , hex nipple 20 mm x 50 mm , ht tape black roll of 20 mtr , brass spindle , particle board , brass nozzle , ms but hinge 100 mm , ball valve brass , hex nipple , bearing grease , magnetic door catcher , cp brass urinal , cp wall bracket l shape , insulated tape , cp end bracket , blanking plate , lime , industrial socket 63 amp , floor door closer , aluminim hasp and staple , wire clamp 10 mm , batten nail , pvc internal cistern10 ltr capacity , tank 1000 ltr , ss curtain rod , sliding bolt , cotton thread 1 pkt 60 pcs , aluminium sheet 1 mm thick , toilet seat covers (v2) (q4) , ptmt tap fitting (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type modular domestic fan regulator as per is 11037 (q3)

Central Government/Public Sector

TRN :35675319 | 06 Nov, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for gem bids for ebm safety plug, shorting connector, explosive bolt shortcircuit connector, short circuit connector, short circuitconnector s and a, igniter shorting connector, igniter fuzeplug, wing pin removal tool, cover opening jig, tvsexplosive bolt wrench, punch pin, nozzle assembly jig, sleeve, tvs jet vanes caliber device, belleville springwrench warhead fastening ring tool, steering fin settingjig, c-pin removal jig, spacer, folding wings fin jig, motorcase pump, front joint fox jig fwd ring placement adaptor, umb connector holder tens. dev. assy., lock pin releasetool, front safety jig tool, relief valve release tool, finshaft arming handle, wing shaft arming handle, extendedwrench handle, umbil conn posit key pin face spanner, servo assembly jig, holding pin, s and a opening jig, sand a assembly device, warhead removal device, slidinghammer, handle, rocket motor exhaust nozzle dummy, missile clamp key, s and a securing pin, missile holdingclamp

Central Government/Public Sector

TRN :35617279 | 04 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for 10328522 lv7 stln vf 5120 424038 p 2607747 wrenchsocket 10329097 lv7 stln vf 5120 424060 p 2606547socket wrench face spanner 10328528 lv7 stln vf5120 423982 p 2608147 drift 10328388 lv7 stln vf p2617147 puller pinion inner brg 10327274 lv7 stlnvf p 3409847 timing setting tool 10328402 lv7 stlnvf p 2618147 spanner pinion yoke nut 10328864 lv7stln vf 5120 424039 p 2609247 wrench socket 10328783 lv7 stln vf 5120 424028 p 2610447 inserterand remover bearing and bushing 10328414 lv7 stlnvf p 2617847 drum pinion brg removal 10312805 lv7mpvy 640 03 1615 1 flexible pipe 10351998 lv7 mpvydmd nk 1065 24v power point 10611018 lv7 sac10x10wc al pk500346 piston ring compressor 10328789lv7 stln vf 5120 423980 p 2607247 sliding t headsocket wrench handle 10328837 lv7 stln vf 5120423973 p 2612847 wrench socket 10329057 lv7 stlnvf 5120 424052 p 2607147 gear adapter pullermechanical 10328800 lv7 stln vf 5120 424227 p2603547 puller mechanical 10328784 lv7 stln vf5120 424069 p 2606747 remover seal 10329049 lv7stln vf 5120 424046 p 2608947 remover bearing andbushing 10328703 lv7 stln vf 5120 424044 p 2609047wrench spanner 10328797 lv7 stln vf 5120 424223 p2610647 compressor piston ring 10329098 lv7 stlnvf 5120 424067 p 2604347 puller mechanical 10327392 lv7 stln vf p 2618247 pinion brg cupremoval tool 10329102 lv7 stln vf 5120 424058 p2604047 inserter and remover bearing and bushing 10329051 lv7 stln vf 5120 424051 p 2607447 inserterand remover spring 10328417 lv7 stln vf p 2617747drift deflector 10328392 lv7 stln vf p 2617247puller flange half brg 10328500 lv7 stln vf 5120 bid number gem2025b6785964 dated 14-10-2025 bid document1 146 p 2604247 inserter seal 10344881 lv7 stln vfp 2600441 gauge engine compression pressure 10328787 lv7 stln vf 5120 424070 p 2607347 punchdrift drift oil seal fw hsg 10323964 lv7 stln vf4910 003218 p 2607547 adapter compression gaugeengine 10327376 lv7 stln vf p 2618347 drift flangehalf brg 10328825 lv7 stln vf 5120 423979 p 2607047inserter bearing and bushing 10328803 lv7 stln vf5120 424228 p 2612447 wrench socket 10559550 lv7hmv 8x8 al sv 7470 798 703 torque measuring devicewithout insert 10325564 lv7 mpvy 115 43 0052 1 earthcable 10325851 lv7 mpvy 007 0077 01 dash controlglw 161 10565199 w18 hmv 8x8 al 010 0002 00pressure switch high 10304347 lv6 mt6 2786 0913 5824rubber hose 10379645 k7 ikg kd fp 4 67 washerrubber 100mm 10381322 k7 ikg bum bur 21 24b frontglass lh wind screen atul tuff 10386612 k7 4210001665 bucket canvas mk 6 without lid 18 ltrs 10385151 k7 ikg jew 876 quick start pilot assy al 10383317 k7 ikg bum bur 22 44 fire hook 3 5m 10377297 k7 4210720312113 icn 4210000864 hose assypoly fabric lined reinforced 10336090 lv7 av 15 324914 010 152 ball 25 400 40 stn 023 680 10331618 lv7av 15 2238 0 487 wrench 36 csn 230625 10324344 lv7av 15 578 003 007 352 30 wedge 10323464 lv7 av 15273 111 014 654 ring 170x3 10326026 lv7 av 15113607 sealing ring 24x32x2 stn 029381 40 10348499lv7 av 15 578 003 100 252 34 spacer ring 10338593lv7 av 15 112 437 5 oil sealing 45x62x8 stn 029 401 10337923 lv7 av 15 578 003 054 252 62 lug 10311209lv7 av 15 578 003 917 452 80 bar complete 10335590lv7 av 15 578 003 053 652 62 socket 10327255 lv7 av15 578 003 022 152 30 pawl 10340118 lv7 av 15 548727 046 016 key ring r 40 10340002 lv7 av 15 571 903610 621 spot light protect cover 308 8011 11 10325150 lv7 av 15 578 003 017 052 30 front windowgasket left 10340696 lv7 av 15 273 521 117 317 oilseal 60x80x13 stn 029401 1 10348424 lv7 av 15 724911 006 235 gloves three fingers 10325185 lv7 av15 324 712 170 000 bearing 30217 10348317 lv7 av 15578 003 071 352 62 nut 10346861 lv7 av 15 578 003107 652 38 washer 10329003 lv7 av 15 578 003 103752 34 spring 10332431 lv7 av 15 413 311 020 0wrench 16 10348816 lv7 av 15 578 003 029 352 29packing 10332942 lv7 av 15 324 981 000 900 securingwasher mb 9 10316070 lv7 t 815 207 683 625 4 reardelivery tube 10317817 lv7 t 815 130 601 172 000insert 10317661 lv7 t 815 273 521 263 000 shaftsealing 30x55x9 baslf drw7 10347595 lv7 t 815 8125000298 deck covering sealing coating 10349429 lv7t 815 6680 010734 oil deep stick 10517034 lv7 t 815hmv 442 074 712 614 leaver 10332332 lv7 av 15 319531 800 209 packing ring 12x16 10328373 lv7 av 15309 543 181 218 screw m 12x25 10339947 lv7 av 15557 278 003 0 first aid box 10340918 lv7 av 15 578003 113 052 60 packing 10343659 lv7 av 15 311 214011 200 washer 20 10336348 lv7 av 15 273 125 025044 rubber cap 10343622 lv7 av 15 578 003 001 35230 glass sheet front window 10326110 lv7 av 15143 302 037 0 washer 37 stn 02 1702 15 10333110 lv7av 15 311 733 000 800 securing ring 80 10344664 lv7av 15 578 003 104 352 16 spring 10335001 lv7 av 15578 003 041 952 62 spring 10325003 lv7 av 15 578 003016 852 30 front window packing 10344605 lv7 av bid details2 146 1 1 15 578 003 105 052 43 parted ring, 10316858 lv7 t 815110 201 010 7 block boss m8, 10312662 lv7 t 815 130053 740 974 neck js 6, 10323945 lv7 t 815 130 954 161214 sealing rh 415 mm, 10312725 lv7 t 815 130 076855 994 line to trailer brake valve, 10334464 lv7 t815 5365720174693 bushing sleeve 130 050 410 181, 10313825 lv7 t 815 130 054 391 034 cover vehicularcomponents 130054391034, 10316910 lv7 t 815 273121 040 564 plug, 10332394 lv7 t 815 442 021 920 044cover, 10345746 lv7 t 816 311 173 015 0 outer snaplock ring 15 csn 02 2930, 10517022 lv7 t 815 hmv 442074 713 024 control lever, 10521893 lv7 t 815 hmv442 054 391 704 dilatation bag, 10532761 lv7 t 815hmv 273 521 020 217 shaft sealing guferog80x110x13, 10524209 lv7 t 815 hmv 442 079 011 854body contact strip, 10314373 lv7 t 815 4x4 107 214115 140 spring washer 14 b14 is 3063 94, 10317281lv7 t 815 4x4 273 246 120 912 glass gasket 1960 mm, 10314786 lv7 t 815 4x4 442 075 915 584 spring hose, 10317011 lv7 t 815 4x4 273 521 196 000 shaft sealinggp 60x80x8 si csn 02, 10346942 lv7 baz 120 3509250baz belt pump drive, 10350128 lv7 baz fp1013716000g baz tail light fp 101g assy, 10349909 lv7baz opm 306018 va 240 voltmeter ba 240 assy, 10317112 lv7 krz 255b 3125202 air take off pipe tointermediate and rear, 10316620 lv7 krz 255b3501064 gasket, 10323814 lv7 krz 255b 1104209 ainjector fuel return pipe assy, 10315721 lv7 krz255b 3721045 a pipe assy, 10319011 lv7 krz 2381601115 a2 spring, 10318605 lv7 krz 214 6107048 b1door lower weather strip, 10324506 lv7 krz 255b1104507 g cock lh to tank pipe assy, 10324943 lv7krz 288007 p29s clamp, 10319794 lv7 zil 130 6104010right hand door window regulator assy, 10323804lv7 zil 157 3709164 fuel level gauge sending unitchanging, 10337562 lv7 zil sl45 5205900 wind shieldwiper blade, 10311406 lv7 zil 130 3810070 hose assy, 10338104 lv7 zil 164 6104055 window regulatorbrk mech spring head, 10341185 lv7 zil 164au6104057 gear window regulator brake, 10330027lv7 zil 121 4505066 axle, 10301938 lv7 sca5331000055 o ring, 10305635 lv7 sca 315378 screwm5x6, 10306699 lv7 sca 805409 cotter pin, 10301037lv7 sca 393692 hose, 10301464 lv7 sca 259835 coiltube, 10305267 lv7 sca 293542 safety valve, 10302260 lv7 sca 264150 axle stud, 10305741 lv7 sca387268 gasket, 10307381 lv7 sca 140528 couplingnut, 10302502 lv7 sca 35432 gasket, 10301456 lv7sca 2590024447 239460 cover, 10301466 lv7 sca259840 seal ring, 10306132 lv7 sca 254935 seal ring, 10301763 lv7 sca 249108 water temp gauge, 10302136 lv7 sca 1105172 wiper arm, 10302003 lv7sca 159656 switch foot dipper, 10304135 lv7 sca811177 hose, 10300802 lv7 sca 203389 elbow nipple, 10301403 lv7 sca 258357 bearing bracket, 10302270lv7 sca 224219 roller bearing, 10336154 lv7 krz 2141805035 b2 gear, 10316746 lv7 krz 214 5304030gasket seal vent hole cover, 10315445 lv7 krz 255b4224048 packing ring, 10316628 lv7 krz 255b 3501061a oil slinger, 10315457 lv7 krz 255b 3410072 tankfilter assy, 10327743 lv7 krz 200 3515050 valvesafety, 10317625 lv7 krz 214 6105182 handle insidedoor, 10324789 lv7 krz 236 1307035 a3 ring w pumpgland thrust 2361307035a2, 10331936 lv7 krz 318t //bid details3 / 146 bty switch ty pes vk 318 b, 10321232 lv7 krz255b1 3506135 hose, 10317004 lv7 krz 255b 3924012tyre cock wrench, 10317059 lv7 krz 255b 4224175 bhose assy adaptor, 10320638 lv7 krz 250 3506085 10hose, 10333797 lv7 krz 255 3506204 b air pipe, 10347319 lv7 krz 200 3003079 retainer strg knuckletie rod end seal, 10336510 lv7 krz 348841 p29 studm10x13x26, 10351853 lv7 krz 349504 p29 nut, 10321039 lv7 krz 255b 2303071 b shaft left drivingaxle frt, 10317571 lv7 krz 214 6106018 door hinges, 10340824 lv7 krz 210 2401034 a1 oil seal axle shaft, 10326636 lv7 krz 100 3521110 coupling head typepalm, 10316384 lv7 krz 255b 3410100 02 pump filterwith valve, 10322621 lv7 krz 11 3523010 air take offcock assy, 10318993 lv7 krz 238 1601102 b2 spring, 10341771 lv7 krz s307g 3721000 high tone horn s307and low tone s306, 10324503 lv7 krz 255b 1104498 bcock to primary fuel filter pipe assy, 10338032 lv7krz 212a 6105160 flange door outside handle, 10336139 lv7 krz 200 2403048 b gasket rr axle shaftflange, 10325968 lv7 krz pf101 3712000 v side lamptype pf101v, 10304743 lv7 sca 195358 seal ring, 10300920 lv7 sca 41276 pad, 10307231 lv7 sca 214264lock ring, 10301649 lv7 sca 5331004185 277078 oring, 10304233 lv7 sca 562610 nipple, 10306040 lv7sca 809809 bolt m8x25, 10307351 lv7 sca 387214gasket, 10304962 lv7 sca 203372 seal strip l 575mm, 10303459 lv7 sca 4730 72 047 1632 hose elbow 391461, 10307553 lv7 sca 384966 hose, 10300230 lv7 sca142729 hose, 10302803 lv7 sca 284411 bracket, 10305665 lv7 sca 387246 gasket, 10306439 lv7 sca165693 insulating bushing, 10307169 lv7 sca 140556elbow connector, 10301100 lv7 sca 230616 linkyoke, 10307483 lv7 sca 234116 bearing, 10306380lv7 sca 562265 bolt, 10302255 lv7 sca 264148washer, 10304738 lv7 sca 239172 control lampbrake pressure, 10301030 lv7 sca 229350 valveguide, 10304606 lv7 sca 562654 connector, 10300966 lv7 sca 4710043334 258868 tube lower, 10304816 lv7 sca 811192 hose, 10307180 lv7 sca213742 pedal, 10526503 lv7 sca 33554 socket 3 pole, 10307456 lv7 sca 562488 spring, 10301420 lv7 sca258491 bulb 24v 2w w 2 1x950, 10302337 lv7 sca335543 locking wire10328522 lv7/stlnvf 5120-424038/p-2607747 wrenchsocket, 10329097 lv7/stlnvf 5120-424060/p-2606547socket wrench face spanner, 10328528 lv7/stlnvf5120-423982/p-2608147 drift, 10328388 lv7/stlnvf p-2617147 puller-pinion inner brg, 10327274lv7/stlnvf p-3409847 timing setting tool, 10328402lv7/stlnvf p-2618147 spanner pinion yoke nut, 10328864 lv7/stlnvf 5120-424039/p-2609247 wrenchsocket, 10328783 lv7/stlnvf 5120-424028/p-2610447inserter & remover bearing & bushing, 10328414lv7/stlnvf p-2617847 drum pinion brg removal, 10312805 lv7/mpvy 640-03-1615-1 flexible pipe, 10351998 lv7/mpvy dmd-nk-1065 24v power point, 10611018 lv7/sac10x10wc/al pk500346 piston ringcompressor, 10328789 lv7/stlnvf 5120-423980/p-2607247 sliding t-head socket wrench handle, 10328837 lv7/stlnvf 5120-423973/p-2612847 wrenchsocket, 10329057 lv7/stlnvf 5120-424052/p-2607147gear adapter puller mechanical, 10328800lv7/stlnvf 5120-424227/p-2603547 pullermechanical, 10328784 lv7/stlnvf 5120-424069/p-2606747 remover seal, 10329049 lv7/stlnvf 5120- //bid details4 / 146 /p-2608947 remover bearing and bushing, 10328703 lv7/stlnvf 5120-424044/p-2609047 wrenchspanner, 10328797 lv7/stlnvf 5120-424223/p-2610647compressor piston ring, 10329098 lv7/stlnvf 5120-424067/p-2604347 puller mechanical, 10327392lv7/stlnvf p-2618247 pinion brg cup removal tool, 10329102 lv7/stlnvf 5120-424058/p-2604047 inserter& remover bearing & bushing, 10329051 lv7/stlnvf5120-424051/p-2607447 inserter & remover spring, 10328417 lv7/stlnvf p-2617747 drift-deflector, 10328392 lv7/stlnvf p-2617247 puller - flange halfbrg, 10328500 lv7/stlnvf 5120-424029/p-2604247inserter seal, 10344881 lv7/stlnvf p-2600441 gaugeengine compression pressure, 10328787 lv7/stlnvf5120-424070/p-2607347 punch drift/drift oil seal fwhsg, 10323964 lv7/stlnvf 4910-003218/p-2607547adapter compression gauge engine, 10327376lv7/stlnvf p-2618347 drift - flange half brg, 10328825 lv7/stlnvf 5120-423979/p-2607047 inserterbearing and bushing, 10328803 lv7/stlnvf 5120-424228/p-2612447 wrench socket, 10559550lv7/hmv/8x8/al/sv 7470 798 703 torque measuring devicewithout insert, 10325564 lv7/mpvy 115-43-0052-1 earthcable, 10325851 lv7/mpvy 007-0077-01 dash controlglw 161, 10565199 w18/hmv/8x8/al 010-0002-00pressure switch high, 10304347 lv6-mt6 2786-0913-5824rubber hose, 10379645 k7 ikg-kd-fp-4-67 washerrubber 100mm, 10381322 k7 ikg/bum-bur-21-24b frontglass lh wind screen atul tuff, 10386612 k7 4210-001665 bucket canvas mk-6 without lid 18 ltrs*, 10385151 k7 ikg-jew-876 quick start pilot assy al, 10383317 k7 ikg/bum-bur-22-44 fire hook 3.5m, 10377297 k7 4210720312113 hose assy poly fabriclined reinforced, 10336090 lv7/av-15 324-914-010-152ball 25 400-40 stn 023 680, 10331618 lv7/av-15 2238-0/487 wrench 36 csn 230625, 10324344 lv7/av-15 578-003-007-352-30 wedge, 10323464 lv7/av-15 273-111-014-654 ring 170x3, 10326026 lv7/av-15 113607 sealingring 24x32x2 stn 029381.40, 10348499 lv7/av-15 578-003-100-252-34 spacer ring, 10338593 lv7/av-15 112-437-5 oil sealing 45x62x8 stn 029 401, 10337923lv7/av-15 578-003-054-252-62 lug, 10311209 lv7/av-15578-003-917-452-80 bar complete, 10335590 lv7/av-15578-003-053-652-62 socket, 10327255 lv7/av-15 578-003-022-152-30 pawl, 10340118 lv7/av-15 548-727-046-016 key ring r 40, 10340002 lv7/av-15 571-903-610-621spot light protect cover 308 8011.11, 10325150lv7/av-15 578-003-017-052-30 front window gasketleft, 10340696 lv7/av-15 273-521-117-317 oil seal60x80x13 stn 029401.1, 10348424 lv7/av-15 724-911-006-235 gloves three fingers, 10325185 lv7/av-15324-712-170-000 bearing 30217, 10348317 lv7/av-15578-003-071-352-62 nut, 10346861 lv7/av-15 578-003-107-652-38 washer, 10329003 lv7/av-15 578-003-103-752-34 spring, 10332431 lv7/av-15 413-311-020-0wrench 16, 10348816 lv7/av-15 578-003-029-352-29packing, 10332942 lv7/av-15 324-981-000-900 securingwasher mb 9, 10316070 lv7/t-815 207-683-625-4 reardelivery tube, 10317817 lv7/t-815 130-601-172-000insert, 10317661 lv7/t-815 273-521-263-000 shaftsealing 30x55x9 baslf drw7, 10347595 lv7/t-815 8125000298 deck covering sealing coating, 10349429lv7/t-815 6680 010734 oil deep stick, 10517034 lv7/t-815hmv 442-074-712-614 leaver, 10332332 lv7/av-15

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35770210 | 22 Nov, 2025

Tender Value : 0

Sultanpur - Uttar Pradesh

Tender for gem bids for 951-02r 2255 pw50, connector jb or j6 mil-c-26482, d38999/33w17r, metal cap for 55 pin connector mil-c-38999, d38999/26wb98sn, connector 6 pin circularconnector, d38999/26wj35sn, connector circularmating connector, d38999/26wj35sa, connectorcircular mating connector, d38999/26we35sn, 55-pin crimp type circular mating connector plugmil-c-38999 series-iii, , d38999/26wj35sb, connector, m85049/38-s-25w, connector backshell, straight 25back shell of 66-pin circular connector, m85049/38s17w, back shell size of d38999 connector mil series, m85049/38-s-19w, connector backshell, straight 19back shell, m85049/38s11w, back shell size of d38999connector mil series, m85049/38-25w, connectorbackshell, straight 25 strain relief backshell 180degree 25 shell size m

Central Government/Public Sector

TRN :35753435 | 10 Nov, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids for procurement, o ring cagedrwg no 7300 13 01 00 00 02, oring pcdrwgno 7300 13 01 02 00 04, oring rddrwg no 7300 13 01 0200 0, gasketdomedrwg no 7300 13 01 01 00 03, gasket50 pin connectordrwgno 7300 13 01 04 00 08, oring1nrvdrwg no 7300 13 01 09 00 05, oring2 nrvdrwg no7300 13 01 09 00 06, gasket 37 pin connectordrwgno7300 13 01 09 00 02

Central Government/Public Sector

TRN :35735875 | 18 Nov, 2025

Tender Value : 0

Bhusawal - Maharashtra

Tender for supply of 5 pin connector as per specification att.

Related Searched Keywords : sliding connector

List of sliding-connector Tenders

Tender for supply of 5 pin connector as per specification att.

Get sliding connector Tender Alert...

Related Searched Keywords : sliding connector

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us