Filters

List of salt-powder Tenders

List of latest salt-powder Tenders in Indian Tenders. Click on any salt-powder Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for salt-powder Tenders.

All-Tenders (49)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35387397 | 06 Oct, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for rice plain, rice basmati, atta, oil refined 15 litres, ghee, sugar, mirchi powder, haldi powder, salt, meat masala50 gms, chicken masala 50 gm, garam masala 50 gm pack, dania powder 50 gm pack, kusturi meethi 500 gm pack, eggs per box, dalia kg pack, suji kg pack, vermicelliseemiya 100 gm, cornflakes 500 gms pack, soya nutrilac1 kg pkt, dal channa kabuli kg pack, dal rajmash kg pack, dal moong kg pack, dal masoor sabut kg pack, dal arharkg pack, dal mah sabut kg pack, dal masoor split kg pack, dal yellow chana per kg, tea lipton kg pack, jam 500 gmpack, amul butter 500 gms pack, nescafe coffee 500 gms, custard powder kg pack, gulab jamun kg pack, basin kgpack, saunf powder kg pack, meetha saunf 500 gms pack, milk amul tetra case 1 liter, milk amul tetra case 500 gms, biscuit per box, mushroom tin 800 gms, peas tin 800 gms, tomato sauce 500 gms, tomato puree 800 gms, picklemixed 01 kg pack, cherry 500 gms tin, pine apple 500gms, soap 50 gms weight, dettol handwash 200 gms, dishwash bar 200gms pack, washing powder kg pack, duster, badam giri special kg pack, kaju w180 size kgpack, kishmish kg pack, dalcheni kg pack, ilaichi green kgpack, ilaichi kalan kg pack, mineral water 200 ml, khoyasuperior, cloves, sabot zeera, pudina 500 gm pack, boondi kg pack, zeera powder 50 gm pack, ginger powder50 gm pack, chat masala 50 gm pack, rajma masala 50gm pack, sabzi masala 50 gm pack, noodles 500 gm pack, green chilli soya sauce 500 gm, red chilli soya sauce 500gm, soya saunce 500 gm, vinegar 1 liter pack, mayonnaise vegetable 500 gms, white pepper 100 gms, buffet spirit 05 kgs, napkin paper, tooth picks wooden, sugar cube, honey, kehwa masala 250 gms bottle, fruitcocktail 500 gms, maida atta, apron water proof, aproncotton, liquid dish wash 500 ml, garbage bags big size40x50, chef caps cotton, chef gloves disposable, agarbati, gas lighter long, milk made 250 gm pack, silverfoil 1 kg, nylon brush for washing dishes, steel brush fordish wash, cham cham brush, tea namkeen, green tea, coconut powder, coconut saboot, charmagaz, peanutsmoongphali, walnut giri per kg, corn floor per 500 gms, imli per 250 gms, chicken broiler dressed, meat withoutujri, cheese fresh, curd fresh, hill puff bakery item 80gms, tile liver bakery item 80 gms, coconut biscuitbakery item 100 gms, bread 400 gm pack good quality, amul cream 200 ml, dates good quality, onion goodquality, potato good quality, tomato good quality, cauliflower good quality, cabbage good quality, turnipgood quality, kadam saag good quality, spinach palakgood quality, capsicum simla mirch good quality, brinjalgood quality, reddish good quality, carrot good quality, lauki good quality, garlic good quality, peas good quality, green chilli good quality, dania green good quality, beans good quality, lemon good quality, cucumber goodquality, drum stick nadroo good quality, banana goodquality, grapes good quality, pomegranate good quality, apple golden good quality, orange nagpurifresh, watermelon fresh, red shimla paste, cheese slices, dry redchilli, taez patta, black pepper, rasgola tin, white oats, disposable plates silver foil type, disposable plates, disposable spoon, ajwain, fena powder, dal black channa, saboot dana, jelly

State Government

TRN :35387553 | 29 Sep, 2025

Tender Value : 0

Udaipur - Rajasthan

Tender for gem bids for mess, sugar, rice, gehu, aata, soya oil, sarso oil, dalda, deshi ghee, moong dal dhuli, arhar dal, masoor dal, chana dal, udad mogar dal, choodeki dal, haldi powder, dhaniya powder, mirchipowder, khadi lal mirch, poha, besan, maida, kabuli chana, deshi chana, moong fali daana, matar shukh, sufal matar, rajama, rajma masala, garm masala khada, garm masala pisha, sev, jeera, ajwain, sauf, methi dana, kasuri methi, hing, elachi, aam chur, badam, kaju, kismis, chirongi, long, soth, pista, salt, black salt, sambarmasala, chhola masala, paneer masala, tej pata, toast, chips packet, daliya, rai musterd, kalimirch, bathing soap, colgate paste, tonguecleaner, toothbursh, shoe polish, shoe bursh, sanitary napkin, hair oil, shampoo, shampoo 2, finail, all out machine, kapur ki goli, pochha, toilet cleaner, nariyal jhado, acid, all out botel, wiper small, wiper big, bartan dhone ka sabun, surf, ful jhadu, hand wash, large garbage bag, small garbage bag, black tea, suji or rava, biscuits, laundry soap, fpo - moong dal q2

Central Government/Public Sector

TRN :35374702 | 03 Oct, 2025

Tender Value : 0

Muzaffarpur - Bihar

Tender for gem bids for coomassie brilliant blue g 250, bovine serum albumin, barium carbonate ar, tri-sodium citrate, nutrient broth, nutrient agar 1 point 5, agar powder bacteriologicalgrade, peptone bacteriological, hm peptone b agar, yeast extract powder, sodium chloride ar, potato dextroseagar granulated, d glucose, iodine solution, gallic acid, lactophenol cotton blue, immersion oil low, crystal violet, safranin, ammonium metavandate ar, ammoniummolybdate ar, ammonium ferrous sulphate, sulfuric acidpure ar 2 point 5 litre, chloroform ar 500ml, ferroinindicator 100ml, diphenylamine ar 250 gm, orthophosphoric acid abt 88percent ar 500ml, sodiumfluoride extra pure and ar 500gm, potassium hydrogenphthalate 100gm, sodium bicarbonate ar 500gm, silicagel 60 200 mesh 74 250 mm 500gm, l-ascorbic acid ar100gm, p-nitrophenol 5gm, potassium dihydrogenorthophosphate lr 500gm, ammonium acetate ar 500gm, acetic acid glacial ar 500ml, potassium chloride ar500gm, calcium chloride dihydrate ar 500gm, bariumchloride dihydrate ar 500gm, ammonium chloride ar500gm, hydrochloric acid 35 percent ar 500ml, eriochrome black t 25gm, hydroxylamine hydrochloride ar500gm, edta disodium salt dihydrate ar 500gm, magnesium chloride hexahydrate ar 500gm, diethylenetriaminepentaacetic acid dtpa 500gm, oxalicacid ar 500gm, azomethine h monosodium salt hydrate 5g, l tartaric acid ar 500gm, tri sodium citrate dihydrate ar500gm, sulphamic acid ar 500gm, dextrose agar 100gm, perchloric acid about 60 percent ar 500ml, nitric acid min69percent pure ar 500ml, bromocresol green indicator 125ml, methyl red indicator 125 ml, phenolphthalein 0 point 1125ml, potassium sulphate ar 500gm, 1 35triphenyltetrazolium formazan 5gm, 2 3 5triphenyltetrazolium chloride ar 10gm, potassiumhydroxide pellets ar 500gm, triethanolamine ar 500ml, antimony potassium tartrate trihydrate ar 500gm, gumacacia, powder 500gm, calcium carbonate ar 500gm, calcon indicator 5gm, magnesium oxide heavy ar 500gm

State Government

TRN :35375838 | 25 Sep, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for allopathic, bid number gem2025b6666060 dated 10-09-2025 bid document1 88 1 1 pantoprazole inj. 4mg per ml, ondansetron inj i.p 2mg perml, pheniramine maleate inj. 22.75 mg per ml, paracetamol inj.l50mg per ml, inj. paracetamol iv 1gm 100ml, inj. amoxycillin plus clavunic acid plus amoxycillinsodium clavuanic acid, ceftriaxone inj. 1000mg, cefotaxime inj. 1000mg, tetanus toxoid, sodium chloridenormal saline 0.9 percent inj. i.v. 500ml, sodium chloride -normal salin ef 9percent inj.i.v. 100ml, inj.ceftriaxone andsulbactam 1.5g, inj diclofenac soudium, inj hyoscinebutylbromide, inj artesunate 60 mg, inj tranexemic acid500 mg, inj metronidazole i.v. 100ml, sodium chloride anddextrose i.v. 500ml dns, piperacillin plus tazobactum forinjection ups 4 gm plus 500 mg, pantoprazoletab 40 mg, paracetamol tab 500mg, paracetamol tab 650mg, tabdiclogenac plus potassium plus paracetamol plusserratiopeptidase, tab motelukast sodium phosphate ip, diclofenac gel 30gm, povidone iodine ointment 15gm, surgical spirit b.p. 500ml, povidone iodine 5 percentsolution, betadine scrub, syrup paracetamol 125 mg, syrup paracetamol 250 mg, paracetamol drops 100 mg, vitamin d drops 400 iu, syrup calcium 50 mg, syrupmultivitamin, syrup albendazole 200 mg, syrup ondem4mg, syrup azithromycin 100 mg, syrup cefpodoxime 100mg, syrup cefixime 100 mg, syrup levosalbutamol plusambroxol uniphore 1 mg, colimex-df drops, syrup zn 20, oral rehydration salt powder 20.5mg sachet, electrolpowder, probiotic sachet, disposable plastic appron, disposable faee mask, disposable scalp vein set no. 22, disposable scalp vein set no. 23, disposable syringe 2ml, disposable syringe 5ml, disposable syringe 10ml, disposable syringe 100 ml, disposable delivery kit, disposable needle no. 18, disposable needle no. 21, disposable needle no. 22, disposable needle no. 23, disposable needle no. 24, disposable needle no. 26, disposable plastic gloves, disposable bed sheet, ecg eeggel, adhesive plaster cotton based, elastic adhesive tape, bandage cloth as per schedule f- ii than, i.v.cannula 22 g, i.v.sets with hypodermic needle 21 g of 1.5 inch length, infant feeding tube no. 7, infant feeding tube no.8, surgical rubber gloves 6, surgical rubber gloves 6.5, surgical rubber gloves 7, examination gloves small, examination gloves mediuim, examination gloves large, polypropylene mesh with double bar knitted contrsuctionpore, i.v.cannula 24, i.v.cannula 26, sterile plastic sheetsadult, sterile absorbent sheet for new born, dispsosablesterile drape, metrogyl-p 2 percent, vdrl kit 1x 100 test, widal kit 4x5 ml, r a kit 1x50 test, antiseptic liquid, urine strips multistrips 11 parameters, mp kits 1x50 test, edta vaccutainer tubes, plain vaccutainer tubes, fluoridevaccutainer tubes, vaccutainer needles, hbsag kit, antiabd reagent kit, stool container, dengure ns1 antigenkit, intra cathter no.20, three way, rubber catherterno.10, eye pad, gallant blade, ethilon 3-0, ethilon 2-0, ethilon 4-0, gauze, sterillium, disposable plastic tubes10ml, cotton bundle, lab clean //bid details2 / 88

State Government

TRN :35376903 | 30 Sep, 2025

Tender Value : 0

Kozhikode - Kerala

Tender for gem bids for supply, bid number gem2025b6660905 dated 09-09-2025 bid document1 83 0 0 sodium bicarbonate acs 99 7, sodium potassium tartratetetrahydrate extrapure ar, ammonium molybdatetetrahydrate, sodium molybdate dihydrate extrapure ar 99, nitro blue tetrazolium chloride nitro bt nbt extrapure ar99, potassium acetate acs 99, potassium sulphateextrapure ar 99 5, l cysteine hydrochloride monohydrateexiplus multi compendial 99, oxalic acid, calcium chloridedihydrate acs 99, 1 methylcyclopropene 1 mcp 98, sodium hexametaphosphate extrapure ar 65 70, maleichydrazide, ferulic acid, coumarin pure 98, a glucosidasemaltase ex yeast 100u mg powder, acarbose extrapure 95, abts extrapure 2 2 azino bis 3ethylbenzothiazoline 6sulfonic acid diammonium salt 98, potassium persulphateextrapure 97, melatonin extrapure 99, water hplc, methanol hplc, ethyl acetate for hplc and uvspectroscopy, 99.9, ethyl ether acs, 98, abscisic acidnatural s aba for tissue culture 98, gibberellic acid ga3 90, succinic acid acs, 99, l-glutamine extrapure chr, 99, 5amino levulinic acid hydrochloride extrapure 97, oxalicacid extrapure ar, 99.5, l-phenylalanine extrapure chr, 99, l-lysine monohydrate extrapure, 99, l-glutamic acidmonosodium salt monohydrate msg extrapure, 99, acetone, acetonitrile acnfor hplc and uv spectroscopy 99 9, potassium ferrocyanide extrapure ar 99, zinc acetatedihydrate acs 99 5, iodine resublimed ar, 99.8, potassium iodide acs, 99.8, starch soluble extrapure ar, sodium acetate trihydrate extrapure ar 99 5, ninhydrinacs, zinc metal dust pure 99 325 mesh, l prolineextrapure chr 99, sodium thiosulphate pentahydrate acs99 5, nbutyl alcohol 1 butanol n butanol pure 99, 2, 4-dinitrophenylhydrazine dnph reagent grade, 99, sodiumphosphate monobasic monohydrate for hplc 99, tert-butylmethyl ether acs, 99, acetone pure 99, ethyl acetateextrapure ar 99 5, petroleum ether 60 80 extrapure ar, methanol pure 99, dichloromethane extrapure ar99 5, 15diphenyl carbazide, hexane hplc grade, folin andciocalteus phenol fcp reagent ar, 2 2 diphenyl 1 picrylhydrazyl dpph extrapure 95, sodium sulphate anhydrousacs 99, potassium chloride acs 99 5, sodium carbonateanhydrous acs 99 9, albumin bovine ph 7 fraction v bovineserum albumin bsa 98, sodium molybdate, ammoniummolybdate tetra hydrate, aluminium oxide, l aspartic acid, chloroform, ethyl acetate, quercetin, calcium chlorideanhydrous, casein, glacial acetic acid, glycerol triacetate, guar gum powder, glycerol, gum acacia powder, gallicacid monohydrate, gelatin, lead 2 acetate dehydrate, methylene blue, orthophosphoric acid, phosphomolybdicacid, phenolphthalein solution, poly ethylene glycol, phosphate buffer ph7 lq164, potassium sulphate, potassium hydroxide pellets, potassium permanganate, potassium sodium tartrate tetrahydrate, potato dextrousagar, potassium sodium tartrate anhydrous, sodiumhydroxide pellets, sodium phosphate monobasic anhydrous, sodium carbonate anhydrous, sodium thiosulphate, sodium phosphate dibasic anhydrous, sodium caseinate, tannic acid, tween 80 25x100 ml, trichloro acetic acid, xanthan gum, benzene, malto dextrin, hplc hexane, hplc acetone, tolune 2 5 l, hexane 2 5 l, 2 2 diphenyl 1picryl hydrazyl, folin and ciocalteus phenol fcpreagent ar, sodium carbonate anhydrous pure 99 5, sodiumhydroxide pellets acs 97 //bid details2 / 83

State Government

TRN :35377555 | 03 Oct, 2025

Tender Value : 0

Udaipur - Rajasthan

Tender for gem bids for ration, sugar, rice, gehu, aata, soya oil, sarso oil, dalda, deshi ghee, moong dal chilka, arhar dal, masoor dal, chana dal, udad mogar dal, choodeki dal, haldi powder, dhaniya powder, mirchipowder, khadi lal mirch, poha, besan, maida, kabuli chana, deshi chana, moong fali daana, matar shukh, sufal matar, rajama, rajma masala, garm masala khada, garm masala pisha, sev, jeera, ajwain, sauf, methi dana, kasuri methi, hing, elachi, aam chur, badam, kaju, kismis, chirongi, long, soth, pista, salt, black salt, sambarmasala, chhola masala, paneer masala, tej pata, toast, chips packet, daliya, bathing soap, washingsoap, tooth paste, tongue cleaner, toothbursh, shoe polish, shoe bursh, sanitary napkin, hair oil, shampoo 30 ml, shampoo 50 ml, finail, all outmachine, kapur ki goli, pochha, toilet cleaner, nariyal jhado, acid, allout refill, wiper small, wiper big, dishwashing soap, surf, ful jhadu, hand wash, large garbage bag, small garbage bag, tea, suji, biscuit, fpo - moong dal q2

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379659 | 25 Sep, 2025

Tender Value : 14.99 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381009 | 25 Sep, 2025

Tender Value : 14.68 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Related Searched Keywords : salt powder

List of salt-powder Tenders

Get salt powder Tender Alert...

Related Searched Keywords : salt powder

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us