Filters

List of pr-gauge Tenders

List of latest pr-gauge Tenders in Indian Tenders. Click on any pr-gauge Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pr-gauge Tenders.

All-Tenders (212)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49021266 | 20 May, 2025

Tender Value : 10.65 Lacs

Baghpat - Uttar Pradesh

Tender for tender for beautification work in nagar panchayat doghat - exavation in foundation in ordinary soil (loam,clay or sand) including lift upto 1.50 m.and including filling watering and ramming of excavated earth into the trenches or into the space beetween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30 m. from the foundation trenchs .(where machine can not move) as per s.i. no. 251 (a) 2 concrete with 4 cm gauge brick ballast, fine sand of 1.25 f.m and cement, in the proportion of 12:6:1 in foundation and under the floor i/c supply of all materials,labour , t & petc. required for proper completion of the work. as per s.i. no. 273 3 m -150 brick work with 1:4 (one cement & four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 305. 4 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 in lintelof doors & windows excluding supply of reinforcement and its bending .but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials ,labour,tools & plants etc.requered for proper completion of the work including cost of binding wire. but in lighter beam havingspans upto 6 m. as per s.i. no. 289 5 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 but for slab 284 6 m.s.(tor steel or plain ) in plan work such as rc.c. or r.b. work including bending for proper shape and including supply of steel & its wastage ,bend,hooks,and authorised, overlapping shall be measured and including cost of binding wire.as per s.i. no. 504, 7 m -150 brick work with 1:4 (one cement &four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 304 .but in superstructre including necessary cutting & moulding of bricks add extra labour to this item 305+309(4300.00+225.00=4525.00) 8 cementconcrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 includingsupply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no. 279(a). 9 12 mm thick plaster with cement and coarse sand mortar in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, t & p etc. required for proper completion of the work as per s.i. no.584(a). 10 m.s. or iron work of small sizes and section such as holding down bolts ,hold fast tie rods grating etc.same as in item no. 502 above but in m.s. grills / stair case,. raling /gates/trusher racks etc. as per schidule item no. 502 (a) . 11 supply of birbed iron wire 12 supply of birbed iron wire labour only 13 earth work in cutting or embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in depth and earth work in embankmentto be in 20 cm layers i/cramming and dressing the surface to required levels and slopes and also i/c 1.50m lift and 30 m lead. the earth from cutting to be used in making embankment or to be deposited as per spoil banks with in 30 m distance as directed by the engineer incharge . complete in all respect as per sino. 253(a) +261 b 14 supply and laying of 80mm thick precast cement concerete i-shape interlocking paver blocks with top layer of minimum 5 mm thickness having paln dimension 200x(160+120mm) of o.p. cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. the compressive strength of concrete paver block shall not less than 40mpa (m-40) and weigt 4.5kg per no. confirming to is: 15658-2006 including cost of material, with a blanket layer of 4.00cm. thick fine sand labour, t&p and vat etc required for proper completion of the work as directed by engineer-in-charge, including c.p.as per s.i. no. new item no. 14 15 construction of cc road in 1:1.5:3 16 i love doghat size (22*3 feet) 17 iron work structure 18 open gym /jhula/ bench 19 lighting work 20 providing & laying of green grass in ground with labour complete work. 21 supply & fixing of sign boardat site including letter writing, painting both side of board including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no.

Cooperative

TRN :49021589 | 20 May, 2025

Tender Value : 0

Bazpur - Uttarakhand

Tender for supply of on sugar mill , spares parst for hydraulic grab -hydraulic hose pipe set , adapter set for grab , bonded seal of all size , hydex coupling no. 48 , sleeve for hydex coupling no 48 , pin for hydraulic grab complete set , hydraulic cylinder lhs , hydraulic cylinder rhs , bearing of cylinder , bush for cylinder , electrical connector for dcv , seal kitfor hydraulic grab cylinder , pressure gauge kit for grab , suction strainer for hydraulic grab, make fhe , air breather for hydraulic grab, make fhe , return line filter for grab make fhe , solenoid coil for dcv of grab 24v dc , direction control valve 24v dc for grab , transformer of hydraulic grab , split pin of grab pin

Local Bodies

TRN :49021643 | 16 May, 2025

Tender Value : 11.19 Lacs

Hathras - Uttar Pradesh

Tender for tender for c.c. connecting road from main link road to baghel temple in village jaraira - construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per technical specification clause 401. 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 3 cement concrete pavement (c.c. road slab m 30 (grade) (1:1.5:3) coarse and fine aggregate construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base, laying and fixing of 125 micron thick polythene film, including provision of contraction and expansion construction joints, applying curing of concrete slabs for 14 days, finishing to lines and grade as per drawing and technical specification 4 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side. 5 providing concrete for plain concrete (m10) in (1:3:6 :: c:c/s:s/g)open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 6 rcc work with cement approved coarse sand and 2cm(3/4) gauge approved stone grit in the proportion 1:2:4 c:c/s:s/g excluding supply of reinforcement and its bending and including its fixing and binding the same with 24bwgi binding wire and including necessary centering and shuttering etc. and also including supply of all material labour and tools and plants etc. required to proper completion of the work/strength of the concrete shall not be less than m-15 as per drawings and technical specifications clause 802, 803, 1202 & 1203 7 mild steel or iron work in plain work as reinforced concrete i/c bending for proper completion of the work and including the supply of steel and its wastage bend, hooks and athourized over iapping shal be measured upto floor to level 8 supply and fixing of inaugration stone i/c its painting and lettering etc complete as per direction of e/i.

Local Bodies

TRN :49021689 | 15 May, 2025

Tender Value : 86.00 Lacs

Bikaner - Rajasthan

Tender for tender for supply of construction materials gp 20 bd fy 2025-26 - 2 cement ppc3 gravel4 stone 40mm grit (broken by crusher) (cut voids 1/11)5 stone 20mm grit (broken by crusher)6 stone 12/10/6mm grit (broken by crusher)7 brick ballast8 gravel (cut voids 1/6) including transportation from shobhasar quarry9 brick (22x11x7.5 cm) first class10 masonry beradda (rr)11 polished kota stone (one side polished) upto 900 sq. cm12 polished kota stone (one side polished) from 901 to 2300 sq. cm13 polished kota stone (one side polished) more than 2300 sq. cm14 stone chokhat single paitam size 100x75 mm15 jodhpur stone strips upto 1.5 m length, minimum 40 mm thick16 stone strips 1.5 m to 2.40 m length, minimum 50 mm thick17 stone strips 2.4 m to 3.0 m length, minimum 65 mm thick18 stone strips above 3.0 m length, minimum 75 mm thick19 precast tiles glazed size-30x45 cm20 precast tiles mosaic size-40 mm thick21 precast tiles vitrified size-60x60 cm22 cement interlocking block m-30 grade, 60 mm thick23 cement interlocking block m-30 grade, 80 mm thick24 factory made doors (30 mm thick, solid core single leaf)25 structural steel iron (tor steel thm 415/500 for reinforcement)26 winding wire 18 gauge27 iron girders28 conical iron/square iron rods/leaf/angle iron29 iron mesh (24 gauge, 14 mesh)30 glass 3 mm thick31 colour paint enamel paint32 distemper (water bound)33 for lime-paint (aaras/kali)34 primer (for iron/wood)35 g.i. sheet 22 gauge (0.80 mm)36 p.v.c. pipe 90 mm diameter (with ring)37 p.v.c. pipe 110 mm diameter (with ring)38 p.v.c. pipe 140 mm diameter (with ring)39 p.v.c. pipe 110 mm (2.5 kg/sq.cm) with coupler40 centering, shuttering (planking and rigging) for laying rcc roof, slabs, balcony, lintel etc. upto 4.5 m height and removal shuttering ply41 shuttering steel42 transportation of soil for various distances including loading, unloading and stacking of material (length of transportation will be calculated by nearest route and not by road)

corporations/Associations/Others

TRN :49022214 | 15 May, 2025

Tender Value : 16.00 Lacs

Belapur - Maharashtra

Tender for supply of material stationery , material stationery , pencil dark (10 pcs per box) apsara gold h.b , pencil rubber (20 pcs per box) nataraja , pencil sharpener plastic (20 pcs per box)apsara , punch machine d.p. 280 kangaro , punch machine heavy duty 800 no. kangaro , stapler hd 45 kangaro , stapler 10 no. kangaro , heavy duty hd 23 x 17 stapler for noteskangaro , stapler pin 10mm (20 packets per box) kangaro , stapler pin 24/6mm (pack of 1,000 staplers)kangaro , stapler pin 23/13 mmkangaro , stapler pin 23/17 mmkangaro , stamp pad blue 9.6 cm x 15.7 cm camline , stamp pad red 9.6 cm x 15.7 cm camline , stamp pad blue 11.6 cm x 6.5 cmcamline , stamp pad red 11.6 cm x 6.5 cm camline , stamp pad ink blue (100 ml)camline , stamp pad ink red (100 ml)camline , tachani pin (65 grams)lion pins , u pin 26 mm (100 clips) deluxelion pins , permanent marker pen bluecamline , permanent marker pen ink blue 15mlcamline , highlighter marker pen luxor , white board markerscamline , sketch pen set (large) per packet (12 pcs)camline , plastic scale 18 inchescamline , plastic scale 12 inchescamline , steel scale 12 inchescamline/ajanta , scissors steel 160 mm 6.3 incheslourdes / sharp cut , paper cutter (small) 9 mmred lions , magnetic pin clip container royal , water sponge dabbi (canister) (1 dozen) , tocha , white chalk (140 pcs per box) camel , colored chalk (140 pcs per box)camel , 6 lever lock (navtal lock) godrej , 7 lever lock (navtal lock) godrej , calculator 12 digit (black) casio , plastic bag 5 x 7 heavy (375 gauge) mihir , nylon rubber band no. 16royal , box file large kangaroo clip laminated deluxe , box file small kangaroo clip laminateddeluxe , cello tape 1 inch plain 30 meters , cello tape 2 inch khaki 65 meters wonder 555 , white lace 24 inches extra thick , gum bottle 300ml paste camel , candles (10 pcs per box) dolphin , plastic traydolphin , steel dustbin , chit paper 1x3 assorted colors (25mm x75mm) x150 sheets mongoosemujik 555 , sutali (packing of 1 kg) , table duster cotton (as per sample ) 18x18 , air freshener / room freshener (sealed) , 1 quire register deluxe , 2 quire registerdeluxe , 3 quire register deluxe , 4 quire register deluxe , 5 quire register deluxe , holguard (504 rounds) per packet (3 sheets)printastic , notepad (1/8 - 40 pages) deluxe , twoflap folder , foreflap folder , plastic folder , paper rim a/4 (70 gsm)j.k. easy copier , paper rim a/4 (75 gsm)j.k. easy copier , paper rim legal f/s (70 gsm) j.k. easy copier , paper rim legal f/s (75 gsm)j.k. easy copier , green (laser paper) f/s (80 gsm) net weight 3 kg , envelope 11 x 23.5 cm. khaki (printed) , envelope 11 x 23.5 cm. khaki , white envelope 11.5 x 24 cm. , envelope 30 x38 cm. khaki , pencil celleveryday , exam pad (wooden) 23 x 37 cm. quality , charging torch (battery) , steel jug medium size (2 litres) , paper cutter large 18 mmred lions / music 555 , dated stamp , carbon paper small blue (210 mm x 330 mm)kores , driver batch red (plastic) as per pattern/sample , conductor batch yellow (plastic) as per pattern/sample , stapler pin remover heavy duty sr-300 kangaro , plastic dustbin (5 litres)

Local Bodies

TRN :49022676 | 16 May, 2025

Tender Value : 62.20 Lacs

Raebareli - Uttar Pradesh

Tender for tender for development of plots behind bss school at amol vihar yojna - earthwork in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20) in depth and earthwork in embankment to be in 20 cm (8) layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5 fts) lifts and 30 m (100) lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks within 30 metres (100 fts) lifts distance as directed by the engineer-in-charge. si. no.-251 2 providing and laying of gsb (shanker garh)in road reparing all complete. 3 providing and laying of wmm in road reparing all complete. 4 providing and laying of tack coat all complete. 5 providing and laying of prime coat all complete. 6 providing and laying of 20mm thick premixing all complete. 7 providing and laying of seal coat all complete. 8 excavation in foundation in ordinary soil (loan clay or sand) including lift up to 1.5 m (5fits.) and lead upto 30m (100fits) & including filling, watering and ramming of excavate earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in charges up to a distance of 30m (100 fits.) from the foundation trenches. 9 providing and laying cement concrete 1:4:8 (1 cement ;4 coarse sand ; 8 graded stone aggregate 40mm nominal size) including supply of all materials, labour and t & p etc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 10 150-class brick work in 1:4 cement and coarse sandmortar in foundation and plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 11 12mm thick cement plaster in dedo or skirting in 1:4 consisting of one part of cement and 3 parts of approved coarse sand laid in panels, including supply of all materials, labour and t & p etc required for proper completion of the work. 12 p.c.c. work with cement approved coarse sand and 20mm gauge approved stone grit in the proportion of 1:2:4 inincluding supply of all materials, labour and t&p etc. required for proper completion of the work. 13 r.c.c. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in proportion of in (1:1.5:3) in slab workexcluding supply of reinforcement & its binding but including its fixing & bending the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all material ,t&p etc.required for proper completetion of the work. bindig wire cost being included in the item. 14 mild steel or iron in plain work such as reinforced concrete or reinforced brick work(when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks. si. no.-504 15 supply of sweeper with t&p including all complete for manhole/sewer cleaning. 16 snowcem painting in existing surface two coat all complete. 17 suply of manhole cover heavy quality including all complete 18 supply of plumber with t&p including all complete for reparing and laying of water line. 19 supply of fixing dejoints for leakage of water line including all complete (110mm) 20 supply of fixing dejoints for leakage of water line including all complete (75mm) 21 supply of helper including all complete for plumbering work all complete. 22 supply of 110 mm cpvc pipe including all complete for reparing of water line work all complete. 23 supply of 75 mm cpvc pipe including all complete for reparing of water line work all complete. 24 providing fixing of sluice valve all complete. 25 m.s iron work in small size and section for park gate including all complete.

corporations/Associations/Others

TRN :49022685 | 10 May, 2025

Tender Value : 10.32 Lacs

Kanpur - Uttar Pradesh

Tender for tender for 29-construction of entrance gate in gram panchayat bhaura block-sumerpur - steel work in built up tubular (round hollow tubes ),trusses etc. including cutting ,hoisting ,fixing in position and applying a priming coat of appd. steel primer including welding and bolted with special shaped etc. comp. in all respect hot finished seamless type tubes /pole dsr code no 10.16.2 2 s/f of 25.00mm long steel polished screw with washer 3 painting work with three coat of appd. synthetic enamel paint with one coat of primer 4 construction of r.c.c. foundation size 1.80x1.80mtr. and 1.80 mtr deep for builtup overhead structure including earth work in execavation 150mm thick lean concrete in 1:4:8 cement and coarce sand and 40mm gauge stone ballast r.c.c. with 1:1.5:3 cement ,coarse sand and 20mm stone grite including supply and groutingnof 25mm dia foundation bolt(600mm longas per provision of structure including cost of reinforcement and shuttering including all material ,labour t&p etc. required for proper completion of work including cartage up to site and all taxes labour cess etc. all complete work as per direction of e/i earth work in execavation in foundation by mech. means dsr code no 2.6.1 5 sand filling in foundationdsr code no 2.27 6 lean concrete in 1:4:8 infoundation dsr code no 4.1.8 7 r.c.c. 1:1.5:3 in foundation up to ground level dsr code no 5.1.2 a 8 reinforcement 2% of r.c.c. dsr code no 5.22a.1 9 trasportation .labour charges, t&p such as hydra and other tools etc. 10 providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc 67 2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm. legends, letters, numerals and borders etc should be as per morth specification no-801.37 the sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer the acm (aluminium composite materials) shall be fixed on the back frame ms angle with riveting. micro prismatic type iv retro reflective sheeting (confirming to astm d4956- 09 shall be pressure fixed the retro reflective sheeting (shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance meeting the requirement of three years outdoor weathering of the sheeting as per irc 67-2012 & proof of the same report shall be uploaded which quoting (tende: the rate shall include all materials labour t&p transportation, installatic and incidentals all complete as per direction of the engineer-in-charge morth 801 s.i. no 11 lucknow sor

Co-operative

TRN :49022717 | 20 May, 2025

Tender Value : 0

Powayan - Uttar Pradesh

Tender for supply of hardware and general material and nut bolt items supply of hardware and general material and nut bolt items for season 2025-26 , description , norton make sander disk alkon gold plus. grit no. 80 size 100mm. , -do- 36 no. size 100mm , holdite in perfect liquid in ½ kg. tin. , white lead sakura make. , lead wire size 1mm in 500 gm roll. , emery cloths rough carbandom make. , carbandom make emery cloth medium. , -do- fine. , emery tape rough in 50 mtr. long size 2” carbondam make. , -do- fine , carbandom make emery paste in 400 gm rough. , -do- medium , -do – fine , annabond 112 (50 gms.) , annabond 666 (100gms). , araldite in 180 gms. , araldite in 1.8 kgs. , blue tube in 20ml. , loctite no. 270 in 50ml. , -do- no. 262 in 50ml. , rustoline in ½ ltr. tin. , teflon tape size ½” , -do- ¾” , -do- 1” , m.seal phata phat in 25gms. , graphite powder in ½ kg. tin. , braso in 100ml. , rubber hose pipe size 1” suitable for 10 kg./cm2 pressure and temperature 100 degree. , unique make complete rubber tyre coupling size px/tc/ph. , unique make spare tyresize px/tc/phdiscount. , rope pulley one groove , rope pulley two groove. , rope pulley three groove. , d-cycle cap. 2 ton. , -do- 5 ton. , -do- 10 ton. , cotton waste coloured. , garware make p.p. rope size 18mm (3/4”) with tc. , jyoti make pure rubber sheet size 1/8 , -do- size ¼ and above. , bearing sleeve jmc make different size , polyster wire sealing size 1 ton x 2 mtr. long. , -do- size 2 ton x 3 mtr. long. , -do- size 5 ton x 2 mtr. long. , indef make chain pulley block one ton capacity with 10 mtr. lift p-model with tc. , -do- 3 ton capacity with 10 mtr. lift. , rubber oil seal mykoda make different size , c.i.plumber block s.m.r make different size , tefflon rod size 50mm x 300mm. , brass shim 0.05x14”x48”. , brass shim size 0.1x14”x48” , -do- smoke grey. , -do- light grey. , -do- sky blue. , namda different size. , diamond make wire braided rubber hose pipe both side bsp fitting size ¼” x 800mm , -do- size ½” x1500mm. , audco make cock valve (plug valve) flanged end size 3” (80mm) regular pattern standard type wrench operated. , spring steel flat differentsize. , ms round different size. , en-8 rod different size. , ci pulley b-section groove no.3 size 4” dia. , -do- c-section groove no. 4 size 8” dia. , brass liner 40mesh x 2 ft. x 13.125 sft. , rubber hose pipe size ¾” for 100o temperature and working pressure 10kg/cm2 , ms perforated sheet hole size 5mm dia size width 900mm x length 2400mm x 3mm thick. , renold chain different size diamond make. , ms. square different size. , oil paper. , ms chain size 5mm , hydrolic connector size 3/8”x1/4” , -do- size 3/8”x3/8” , -do- size ¼”x1/4” , hose clamp suitable size 1”id pipe. , glass lubricator cap. ½ ltr. no.8 connection size ½” bsp. , brass shim 0.05mmx 14”x48” , -do- 0.10mm x 14”x48” , -do- 0.15mmx14”x48” , -do- 0.20mm x 14”x48” , gm solid rod different size. , brass rod different size , sight glass toughened size 210x15mm , hydrolic connector size ½”x14mm , burffi cut zali size 25mm (1”)x4ft. width x 10 gauge x51 ft. long. , glass wool , chcken wire netting 3ft. x 100 ft. , gi binding wire. , silicon bronze rod 1/8”. , double wire braidedsteam hose pipe size ¾” for pressure 21 kg. cm2 and temperature 205oc. , hindustan composite ltd. make brake liner size ¼”x3”. , loctite in 20ml no. 406 , m-seal pidite make , c.i. v belt pulley section c groove no. 4 dia size 7” , -do- section b groove no. 3 dia size 6”. , gun metal valve sant make , totem make die nut bsf size 3/8” , -do- size ½” , -do- size 5/8” , -do- size ¾” , power master tube exponder 42mm id x 45mm od. , copper rod size 1 ½” , cast steel steam valve wj make different size , copper tube pvc coating size ¼” , copper tube cutter , ss tube cutter size 16mm , copper pipe size 10mm x 1.5mm , push pull tee size 8x8x8mm , push pull connector male size ¼”xfemale size 8mm. , -do- size ½” x female 8mm. , pvc tube working pressure 12kg/cm2 size 8mm , brass connector with both side nut and female ¼” , brass nut size ¼” , brass ferrule size ¼” , brass connector size ½” male x ¼” female. , brass connector size 3/8”x1/4” , brass elbow with ferrule size ¼” , brass tee size ¼”x1/4”x1/4” , brass reducer size ½ x 1/4” , brass reducer size ½” x 3/8” , brass reducer size 3/8x1/4” , brass ferrule size 10mm , brass connector with nut and ferrule for size 10mm od , aluminium fitting make thread size ¼”x1/4” , -do- size ½”x1/4” , -do- size 3/8”x1/4” , -do- size ¾”x1/4” , aluminium elbow make thread size ¼”x1/4” , ss connector for with nut and ferrule for size 16mm od tube. , heavy duty plumber block for 22334 k bearing (634). , moscot make isi marked double rope safety belt. , indfos make pressure switchrange 0.5mm to 7 kg/cm2, ¼” bsp fittings. , hap/h.guru make pressure gauge 6” dia bottom entry ½” bsp range 0.21 kg./cm2 , -do- range 0.40 kg./cm2 , h.guru make /hap make pressure gauge dia size 2” range 0.10 kg./cm2 back fitting size ¼” , janatics make air filter regulator range 0.10 kg/cm2 with gauge glass zie ¼” , lp make butter fly valve with ss wafer size 1 1/2 “ , clamp for pipe size 1” , u clamp size ¾” , flat belt size 2”x4 ply. , elegator 45 nos. , hydroulic pipe od 20mmx15mm id suitable for 300 kg/cm pressure. , hydroulic ferrule for 20mm od tube. , hydroulic connector with nut size : 20mm , copper tube size 3/8” , brass ferrule size 3/8” , brass connector with nut size 3/8” , ci diaphragram size 80mm , ci diaphragram valve size 50mm , klinger make gauge glass size a-9 , isi marked ci butterfly valve size 40mm , isi marked ci butterfly valve size 100mm , usha martin ltd. make steel wire rope hemp core size 6/19x3/4”(e.d.inclusive agt m.vat) , isi marked nylon rope with t.c. size 20mm , multi screw driver kit.(jhalai make) , mitutoyo make dial indicator with magnetic stand. , lead wire (0.5) mm(500gram per roll) , steam valve high pressure flanged end size ½” , steam valve high pressure flanged size 1” , pu elbow size 8mm , pu connector size 8x8mm , air filter regulator complete with gauge. , cast iron globe value with ss part size 40mm , mud conveyor belt endless 600mm width 3 ply nylon 8mm thick. , sight glass toughened size 200x20mm , sight glass toughened size 100x20mm , ms sprocket 12 teeth x 50mm pitch. , dead nut size ½” , dead nut size 3/8” , brass elbow size 3/8”x3/8” , brass elbow size 3/8”x1/4” , pu tee size 8mm , gauge glass size ¾”x16” , cast iron reflex valve (horizontal +/vertical use) with gun metal working part flanged size 4”. , light resin bounded pads 1.64x1.22x50mm thick.(per sheet of 02 mtr) , becon make teco generator as per serial no. given by you. , becon make teco indicator as per your sr. no. , stainless steel nozzle for de superheating turbine type. , cast steel gauge glass assembly for reflex gauge klinger , pvc tail end flanged heavy duty size 8” , rubber insertion sheet size 5mm , pvc heavy duty end cap size 4” , power grip make heavy duty tin cutter size 12” , chisel , leader make ci butterfly valve with aisi 304 quality wafer size 4”. , leader make ci butterfly valve with aisi 304 quality wafer size 6”. , isi marked ci nrv with gm working part size 6” , teflon rod size 60mmx300mm , imported ph meter. , imported tds meter. , brass connector with 2 nut+2 ferrule 10mm , brass connector with 2 nut + 2 ferrule size 3/8”x3/8” , brass 3/8 male x ¼” female. , brass 1/4” male x 3/8 female. , brass connector complete size ¼”x1/4” , ci pulley close grain 7” -5 groove – b –section. , ci pulley close grain 10”-5 groove – b- section. , ci pulley close grain 13”-5 groove – c- section. , ci pulley close grain 16”-5 groove-c section. , brass connector with 2 nut + 2 ferrule complete. , copper coil size 3/8” od. , plaster of paris. , high pressure hose flexible with female end fitting size 3/8”x1 ½” , -do size ¼”x1 mtr. , dewrance plug sleeve set of 3 pcs size ¾” , rubber conical washer size ¾” , ci nrv with gm working part size 2 ½” , protector for gauge glass size ¾”x16” , v. belt pulley “c” section 4 groove size 7” , teflon rod size 35mmx300mm , -do-12x40 , high pressure hose pipe with both side size ½”x1 mtr. , -do- size ½”x2 mtr. , high pressure hose with bolt side size 3/8x1 mtr. , high pressure hose pipe with both side 3/8x2 mtr. , h.guru/hap make temperature gauge size 6” range 0-350c. , -do- 0-300c. with 3 mtr. capillary stem length 14” , isi marked ci sluice valve flanged end size 1 ½” , leader make gauge glass cock set size ¾” with ibr tc , m.s. nut bolt with washer , m.s. bolt full thread/half thread inch size 1/4 “ to 3/8” , -do- size 1/2 “ to 1 ½ “ , -do- mm size 6 to 10 mm , -do- mm size 12 to 24mm , ms nutsize ¼” to 1 1/2 “ , ms nut mm size 6mm to 24mm , ms washer different size , spring washer bbbb make different size . , h.t. bolt unbrako make different size , split pin champion make different size , ms rivet different size. , alluminium rivit size ¼”x1/2” , nylock nut size 1” , nylock nutsize 24mm , nylock nutsize 27mm , stainless steel allenkeybolt size 8x 25 mm , stainless steel allenkeybolt size 12 x 25 mm , stainless steel allenkeybolt size 12x40 mm , stainless steel allenkeybolt size 12x50 mm , steel screew , s.s. bolt with nut size- 5/8 x 1-1/2apl make , s.s. bolt size- 8 x 25 mm apl make , s.s. bolt size- 8 x40 mm apl make , s.s. bolt size- 8 x50 mm apl make , s.s.nut size- 8 mm apl make , g.i.bolt size- 8 x 80 mm , g.i.bolt size- 6 x75 mm , g.i.bolt size- 10 x100 mm , m.s. fastner bolt size- 12 mm

Local Bodies

TRN :49022842 | 16 May, 2025

Tender Value : 8.07 Lacs

Raebareli - Uttar Pradesh

Tender for tender for construction work of 04 m.m.i.g. buildings in amol vihar yojna - earth workinfoundation in ordinary soil ( loamclay,or sand) including lift upto 1.5 metre ( 5fts) and lead upto 30m. (100fts.)andincludingfilling watering and raming of excavatedearthintotheplinth and removal anddisposalof surplus earth and directedby the engineer - in - chargeupto a distance of 30m. ( 100 fts ) from the foundation trenches. 2 earth work in cutting or in embankment in ordinary soil, excavation to be in form of regularpitsnotexceeding1/2 mt (20) in depth and earthwork inembankmenttobein20cm (8) layers, including ramming anddressingthesurfaceto requiredlevelsandslopesand alsoincluding1.5mts(5fts)lifts and 30mt (100fts) lead. the earth from cutting to be used in makingembankmentsortobe deposited as spoil banks with in30mts(100fts)distanceas directedbytheengineerin charge,includingcartageof8km. 3 concrete with4cm. (1*1/2) gauge brick ballast, fine local sand of 1.25 fineness modulous andcementin proportion of 8: 4:1infoundationsand under floors, includingsupply of allmaterials,labourand t&p etc.requiredforpropercompletion of the work. 4 providingandlayinginposition specified grade of reinforced cement concrete, excluding cost of centering, shuttering, finishing and reinforcement in 1: 11/2 : 3 ( 1 cement, 11/2 coarse sand , 3 20mm graded stone aggregate. 5 foundations,footings,basesof columns, etc. for massconcrete 6 columns,pillars,piers,abutments, posts and struts 7 suspended floors, roofs, landings, balconies and accessplatform 8 mildsteelorironinplain worksuchasreinforced concreteorreinforced,brick work(when notincluded inan over all rates ) wroughtto required shapeasnecessary includingbendingforproper completion of the work and including supply of steel its wastagebendhooksand authorised over lapping shallbemeasured. 9 brick work in comman burnt clay (non-modular)bricks of class 150 in super structure aboveplinthlevelincluding supplyoflabour,materialand t&prequiredforproper completionofworkincement mortar 1:6 ( 1 cement: 6 coarsesand) 10 class150 brick work in1:4 cementand coarsesand mortarinsuper - structureforwallthickness 12 cms 11 12mmthickcementplasterof mix1:4(1cement:4coarsesand) 12 providing &layingof lightcinderfillingunderfloorof toilets & other sunken roofs. 13 providingandfixinginwall unplasticisedrigidpvcrain waterpipesconformingtois: 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermalexpansion,(i)singlesocketed pipes. 110 mm dia 14 providingwoodworkinframe ofdoors,windows,celerestory windowsandotherframes, wrought frames and fixed in positionwithholdfastlugsor withdashfastnersofrequired dia and lenghts (hold fast lugs or dashfastnersshallbepaidforseperately): sal wood 15 providingandfixingangleiron framesfordoors,windowsand ventilatorsofmildsteelangle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t- ironframeortothewallwith dash fastener, including fixing of necessary butt hinges and screwsandapplyingapriming coatofapprovedsteelprimer, all complete as per the direction ofengineer-in-charge.(fordoorframes) 16 providingandfixingisimarked flush door shutter confirming to is:2202(part1)non-decorative type, core of blockboard constructionwithframeoffirst classhardwood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face vineers on both facesof shutters:35mm thick including isi marked stainlesssteelbutthingeswithnecessary screws. 17 providingandfixingwiregauge shutterusinggalvanisedms wiregaugeofaveragewidthof apurture1.4mminboth directionwithwireofdia 0.63mm for doors, windows and celestorywindowswithhinges and necessary screws. 35mm thick shutter, with isi marked mspressedbutthingesbright finished of required size withsecond class teak wood. 18 steelworkweldedinbuiltup sections/framedwork, including cutting, hoisting, fixing inpositionandapplyinga primingcoatofapprovedsteel primer using structural steel etc. asrequired.ingratings,frames, guard bar, ladder, railings, brackets,gatesandsimilarworks(forwindow grills) 19 providingandfixingaluminium towerbolts,isimarked, anodised (anodic coating not lessthangradeac10asper is:1868) transperent ordyed to required colour or shed, withnecessary screws etc. complete. 150 x 10mm+ 20 250 x 10 21 providingandfixingaluminium sliding door bolts, isi marked anodised anodic coating not less thangradeac10asperis: 1868),transparentordyedto requiredcolourorshade,with nutsandscrewsetc.complete:250x16 mm 22 providingandfixingaluminium hangingfloordoorstopper,isi markedanodised(anodic coatingnotlessthangradeac-10asperis:1868)transparent ordyedtorequiredcolourand shed, with necessary screws etccomplete. twin rubber stopper. 23 mildsteelorironwork of heavy sizes and sections such as holdingdownbolts,holdfast, tie, rods gratings etc (when not included in an over all rates) wrought to required form, includingsupplyofsteel,bolts, nutsandwastageetcandtheir fixingrequiredtoproper completionofwork.(fortubular stair case railing) 24 providingandlayingvitrified floortilesindifferentsizes (thickness to be specified by the manufacturer) with water absorptionlessthan0.08%and conforming to is : 15622, of approved make, in allcolours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand),includinggrouting the joints with white cement and matching pigmentsetc.,complete. size of tile 600x600 mm 25 providingand laying vitrified tilesin differentsizes (thickness tobespecifiedby manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in allcolours &shade,inskirting,riserof steps,over12mmthickbedof cement mortar 1:3 (1 cement: 3 coarsesand),includinggrouting thejointwithwhitecement& matching pigments etc.complete. size (600x600) 26 marblestoneflooringwith18 mmthickmarblestone,asper sampleofmarbleapprovedby engineer-in-charge, over 20 mm (average)thickbaseofcement mortar 1:4 (1 cement : 4 coarse sand) laid and jointedwith grey cement slurry, including rubbingand polishing complete with : udaipur green marble 27 providingandfixingfirstquality ceramic glazed wall tile confirmingtois:15622 (thickness to be specified by the manufacturer)ofapproved makeinallcolours,sheds exceptburgandy,bottlegreen, black of any size as approved by engineerincharge,inskirting, rizersofstepanddados,over 12mmthickbedofcement mortar1:3(1cement:3coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mix with pigment ofmatching shed complete. 28 providing and laying ceramic glazed floor tiles of size 300x300 mm(thicknesstobespecified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours suchaswhite,ivory,grey, fume red brown, laid on 20 mm thickcementmortar1:4(1 cement : 4 coarse sand), includingpointingthejoints with white cement and matchingpigment etc, complete. 29 providing and applying white cementbasedputtyofaverage thickness1mm,ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. 30 finishing walls with acrylic smoothexteriorpaintof required shade on new work (twoormorecoatapplied@1.67ltr/10sqmoverand includingprimingcoatof exterior primer applied @ 2.20kg/ 10 sqm) 31 wallpaintingwithacrylic emulsionpaint,havingvoc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture,includingapplying additional coats wherever required, to achieve even shadeand colour. two coats 32 paintingwithsyntheticenamel paint of approved brand and manufactureofrequiredcolour togiveanevenshade:twoor morecoatsonnewworkover an undercoatofsuitable shade with ordinary paint of approvedbrand and manufacture 33 providing and fixing white vitreouschinapedestaltype water closet (european type) withseatandlid,10litrelow level white vitreous china flushingcistern&c.p. flush bend with fittings & c.i.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proofcouplingofapproved municipaldesigncomplete, including painting of fittings and brackets, cutting and making good thewallsandfloorswherever required : w.c. pan with isi markedwhitesolid plastic seat and lid 34 providingandfixingwashbasin withc.i.brackets,15mmc.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making goodthewallswhereverrequire: whitevitreouschinawash basin size 630x450 mm with a pairof15mmc.p.brasspillartaps 35 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittingscomplete. semi rigid pipe 32 mm dia 36 providing and fixing cp brass bibcock of approved quality confirming to is: 8931 15mm nominal bore. 37 s/f of 15mm nominal bore cpvc pipe all complete. 38 providing and fixing cp brass angle valve for basin mixer and geyser points of approved quality confirming to is:8931 15mm nominal bore. 39 15mm nominal boare 40 providing and fixing cp brass shower mixer of 15 or 20mm bore including cp brass connection with angle valve of standard design and approved make confirming to is:8931 41 providing and fixing cp brassover head shower with 15 or 20 mm inlet including connection complete: 100mm diameter. 42 providing and fixing trap of selfcleansing design with screwed down or hinged grating with or with out vent arm complete, including cost of cutting chases and making good the walls and floors:100mm inlet and 100mm out let pvc 43 100mm inlet and 75mm outlet pvc 44 providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 45 providing, fixing and jointing pvc pipes of different diameters with with pvc solvent cement (or as per manufacturers specifications) with or without sockets (if sockets are provided with pipe length) in vertical sewage line, waste water line and vent line with all necessary bends, angle bends, tees, elbows ms bat clamps along with all necessary fastners and bolt with cutting chases and making good the walls and floors wherever required including testing of the same all as per direction and satisfaction of engineer in charge.6kg per sqin pressure pipe75mm inner dia. 46 6kg per sqin pressure pipe110mm inner dia. 47 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings, including fixing the pipe with clamps 1.00m spacing. this includes jointing the pipes and fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. 15mm nominal outer dia pipes. 48 25mm nominal outer dia pipes. 49 constructing masonary chamber 30x30x50cminside,inbrick workincementmortar1:4(1 cement:4coarsesand),with ci surface box 100x100x75 mm(inside)withhingecover fixed in cement concrete slab 1:2:4 ( 1 cement : 2 coarse sand:4 graded stone aggregate 20mm nominal size) including necessary excavation, foundationconcrete1:5:10(1cement:5finesand:10graded stoneaggregate40mmnominal size)andinsideplasteringwith cement mortar1:3 ( 1 cement : 3coarsesand)12mmthick, finishedwithafloatingcoatof neat cement complete as perstandard design: 50 supply delivery errection the fabricatedmsboardofsuitable sizeonwhichthefollowing supplieditemsshallbefixedas per the direction of enggincharge. 51 (a)supply and fixing 63 ampdoublepole(singlephase &neutral)240voltresidual currentcircuitbreakerrccb havingasensivitycurrentup to300 ma on the existing ms board complete with connection testing&commissioningetcas required. 52 (b)supplying & fixing 2+8way single door prewired sp&n mcb distribution board of sheet steel for240voltonexistingms board complete with dpmcb isolator40amp240volt1no& 25amp single pole240 volt spmcb(c)series5nos completeduly wired with 4sqmm fr pvc insulated copper conductorupto terminal box tinned copper busbar ditachable gland plate, inter connection phosphotized &powder coated includingearthingetcasreq( for power distribution ) 53 (c)supplying & fixing 2+8way single door prewired sp&n mcb distribution board of sheet steel for240voltonexistingms board complete with dpmcb isolator40amp240volt1no& 10amp single pole240 volt spmcb(c)series5nos completeduly wired with 4sqmm fr pvc insulated copper conductorupto terminal box tinned copper busbar ditachable gland plate, inter connection phosphotized &powder coated includingearthingetcasreq( for light distribution ) 54 wiring point for lightwith 1.5sq mmfrpvcinsulated multistrandsinglecorecopper conductorcableinpvcconduit concealedinthewallcomplete with modulartype switch &ceilingrose/angle/batten holderon3mmthickphenolic laminated backalite sheet etc comp in all respect 55 wiringpointforfan 1.5sq mmfrpvcinsulated multistrandsinglecorecopper conductorcableinpvcconduit concealedinthewallcomplete with modulartype switch &ceiling roseon3mmthick phenolic laminated backalite sheet &fan boxetccompin all respect 56 wiringpointfor freshairfan with 1.5sq mmfrpvc insulated multistrandsinglecorecopper conductorcableinpvcconduit concealedinthewallcomplete with modulartype switch &ceiling roseon3mmthick phenolic laminated backalite sheetetc comp in all respect 57 supply&fixing5ampmodular switch & 5amp 5pin modular socketontheexistingmodular plateandswitchboxincluding connection etc as reqd. 58 supply&fixingofpowerplug 20amp250voltflushtype modular switch& 5pin 20amp 250voltmodular socket on concealedmsbox etc.asrequered 59 supply & wiring for power pointwith2no4sqmmfrpvc insulated1100voltgrade multistrandsinglecorecopper conductor cable in 20mm dia heavydutypvcconduitwith1 no2.5sqmmfrpvcinsulated multistrandcopperconductor cable as earth continuity wire in conduit etc as required 60 wiringofcircuitalongwith earth wire with the following size of fr pvc insutated copper conductorsinglecorecablein recessed medium class 20mm dia pvc conduit as required 61 1x1.5sqmm+1x1.5sqmm 62 supply & fixing of electronic fan regulatormodular400w 120v-- 280v isi marked on existing switchboard includingmaking connection etc for proper completion of work 63 supply&burryingofsafe earthingelectrodet-19zn-zinc coated,lengthupto3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mmx2.6mm, terminaldia12mm,coating80- 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc)capable of reducingthe soilresistivitywith good mixture of retaining capacityandoneearthinglead of 20mmx3mmg.i. strip,up to switch board (from apron to switchboard,thecostofg.i. strip will be extra)along with 30cm square c.i. frame with hinged cover & masonary housing 64 supplying&layingof 20mmx3mm g.i. strip directly in ground&onwallasrequired complete in all respect (from apron to switch board. 65 wiring for submain withthe 2x10sqmm size fr pvc insulated copper conductor cable in recessedmediumclasspvcconduit as required 66 boring with hydraulic piling rigs with power units, providing and installingcastinsitusingleunder reamedpilesofspecifieddiameter andlengthbelowpilecapinm-25 cementconcrete,tocarryasafe working load not less than specified, excluding the cost of steel reinforcement but including thecostofboringwithbentonite solutionandthelengthofthepile to be embedded in pile cap etc. all complete.(lengthofpilefor payment shall be measured upto tothe bottom of pile cap) : 300 mm dia piles 67 s/f of kitchen sink including all labour and t&p all complete. 68 15mm thick plaster in 1:4 (1 cement and 4 coarse sand) including all labour complete. 69 s/f of gate valve including all labour and t&p all complete 70 s/f pvc bulb holder including all labour and t&p all complete 71 s/f aluminium door handle including all labour and t&p all complete 72 s/f of chequered tiles on ramp of house including all labour and t&p all complete 73 s/f flange bib cock with z spray including all labour and t&p all complete 74 s/f of kota stone on rear court yard anf front porch of house including all labour and t&p all complete 75 s/f of granite stone on kitchen top of house including all labour and t&p all complete 76 s/f of basin mixture including all labour and t&p all complete 77 s/f of 25mm cpvc pipe including all labour and t&p all complete

State Government

TRN :49022950 | 15 May, 2025

Tender Value : 38.84 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for tender for providing and fixing of water supply in affordables houses sector 22 d ,(group h i),yea. wc-02 - providing & fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plane and brass threated fittings, i/e fixing the pipe with clamps at 1 mtr spacing. this including jointing of pipes and fitting with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chase and making good the walls etc 20mm nominal outer dia pipes ar/sor 2020/uppwd item 18.8.2 2 providing and fixing ppr unions 20mm dia dar-18/18.6a.1 3 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) up pwd sor 2020/dar-18/15.2.1 4 cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (uppwd/sor-2020/279(a)) 5 providing & fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) 20 mm nominal bore 18.17.2

Related Searched Keywords : pr gauge

List of pr-gauge Tenders

Get pr gauge Tender Alert...

Related Searched Keywords : pr gauge

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us