Filters

List of poles Tenders

List of latest poles Tenders in Indian Tenders. Click on any poles Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for poles Tenders.

All-Tenders (202)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35765894 | 27 Nov, 2025

Tender Value : 43.33 Lacs

North 24 Paragana - West Bengal

Tender for supplying and delivery of led street light 45 watt in exiting poles at different road and place ward no. 01 to 18 under panihati municipality. 1026 nos. pm/pwd/elec/2025-26/39 sl.no-2

corporations/Associations/Others

TRN :35766045 | 18 Nov, 2025

Tender Value : 61.56 Lacs

Dausa - Rajasthan

Tender for supply, installation, testing, commissioning of octagonal poles with street lights from sdm office to police station on state highway in municipal board area.

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766155 | 29 Nov, 2025

Tender Value : 1.58 Lacs

Hooghly - West Bengal

Tender for supply, erection, fitting and fixing of 4.5 mtr. swaged steel tubular poles for proposed illumination work through 30 watt led street light near back side of bhoja saha house at rajiv gandhi road ward no 19, under konnagar municipality

corporations/Associations/Others

TRN :35766398 | 27 Nov, 2025

Tender Value : 42.58 Lacs

North 24 Paragana - West Bengal

Tender for supplying and delivery of led street light 30 watt in exiting poles at different road and place ward no. 01 to 18 under panihati municipality. 1656 nos. pm/pwd/elec/2025-26/39 sl.no-1

corporations/Associations/Others

TRN :35766528 | 14 Nov, 2025

Tender Value : 46.81 Lacs

Barmer - Rajasthan

Tender for maintenance of 15-20/40/72/90/100-120 / 200 watt and all other lights installed in nagar parishad barmer, rectifying faults, fixing pvc wire in direct lights, rectifying faults in the cable going to octagonal poles installed on main roads, and taking down and raising high mast lights, rectifying faults, re-wiring the half wire fallen on the course arm, repairing the half wire entangled with other electrical wire/guard wire, re-wiring the half wire fallen due to opening of the wiring, re-wiring the broken pin/cycle insulator on the pole, re-fitting the broken half wire in place of the broken half wire etc. maintenance along with levers and materials, maintaining the public light system of the city etc. and all the works as per the tender conditions.

Corporations And Associations And Others

TRN :35767574 | 10 Nov, 2025

Tender Value : 4.06 Lacs

New Delhi - Delhi

Tender for improvement and development of electrical installation on existing gi poles at dera mandi road in ward no.158 bhati under sz

Central Government/Public Sector

TRN :35768473 | 29 Nov, 2025

Tender Value : 1.39 Crore

Jabalpur - Madhya Pradesh

Tender for repair and maint of lt ug cable and other connected works and maintenance of internal electric services and allied work in aor of mh, mdc, echs and repair and maint of lt poles, acsr conductor, cross arm, jumpers, lt panel, apfc panels etc

Central Government/Public Sector

TRN :35768641 | 22 Nov, 2025

Tender Value : 40.00 Lacs

Darrang - Assam

Tender for repair/maintenance of lt cables, panels, poles and other connected items at saa under ge s tezpur

Central Government/Public Sector

TRN :35768658 | 14 Nov, 2025

Tender Value : 29.90 Lacs

Siliguri - West Bengal

Tender for repair replacement of street lights poles automatic switches connection cables periodical service repair maintenance of dg sets automatic control panels alternator earthing and connected works at electric installations at baisakhi grn under ge 859 ew

Related Searched Keywords : poles

List of poles Tenders

Tender for supplying and delivery of led street light 45 watt in exiting poles at different road and place ward no. 01 to 18 under panihati municipality. 1026 nos. pm/pwd/elec/2025-26/39 sl.no-2

Tender for supply, installation, testing, commissioning of octagonal poles with street lights from sdm office to police station on state highway in municipal board area.

Tender for supply, erection, fitting and fixing of 4.5 mtr. swaged steel tubular poles for proposed illumination work through 30 watt led street light near back side of bhoja saha house at rajiv gandhi road ward no 19, under konnagar municipality

Tender for supplying and delivery of led street light 30 watt in exiting poles at different road and place ward no. 01 to 18 under panihati municipality. 1656 nos. pm/pwd/elec/2025-26/39 sl.no-1

Tender for improvement and development of electrical installation on existing gi poles at dera mandi road in ward no.158 bhati under sz

Tender for repair and maint of lt ug cable and other connected works and maintenance of internal electric services and allied work in aor of mh, mdc, echs and repair and maint of lt poles, acsr conductor, cross arm, jumpers, lt panel, apfc panels etc

Tender for repair/maintenance of lt cables, panels, poles and other connected items at saa under ge s tezpur

Tender for repair replacement of street lights poles automatic switches connection cables periodical service repair maintenance of dg sets automatic control panels alternator earthing and connected works at electric installations at baisakhi grn under ge 859 ew

Get poles Tender Alert...

Related Searched Keywords : poles

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us