Filters

List of pipe-tap Tenders

List of latest pipe-tap Tenders in Indian Tenders. Click on any pipe-tap Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pipe-tap Tenders.

All-Tenders (106)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35364505 | 23 Sep, 2025

Tender Value : 4.90 Lacs

Gurdaspur - Punjab

Tender for gem bids for cat, bid number gem2025b6641081 dated 13-09-2025 0 0 bid document1 60 0 0 2 2 aeroflexible pipe 16sq mm super 25 mtr roll, aeroflexiblepipe 20sq mm super 25 mtr roll, sleeve heat shring 5 sqmm15 mtr roll, sleeve heat shring 10 sq mm 15 mtr roll, battery lugs size 779 copper, battery lugs size 780acopper, battery lugs size 780g copper, battery terminalnegave h duty brass 12 pcs in pkt, battery terminalnegative brass small 12 pcs in pkt, bulb 12v 2w anchor 10pcs in pkt isi or bis marked, bulb 24v 10w 10 pcs in pkt isior bis marked, bulb 24v 21w single filament 10 pcs in pktisi or bis marked, bulb 24v 4w 10 pcs in pkt isi or bismarked, bulb 2w edge base 10 pcs in pkt isi or bis marked, crocodile clamp copper, earth strip copper 18 inch, earth strip al copper 18 inch y type, fuel tank unit fixingscrews 8mm 2x15, fuse 05 amp blade type 50 pcs in pkt, fuse 10amp blade type 50 pcs in pkt, fuse 15 amp bladetype, insulation tape size point 5 inch length 25 meterblack, insulation tape size 1 inch length 25 meter, loomtape 25 meter, pivot bolt for starter motor for 7m14, rectifier assembling kit for lucas sa45, oil seal suja 3872, pol screw 13 mm for lucas 7m14, isopropyl 500 ml, rust cleaner spray wd 40, self starter mounting stud a, soldering wire, soldering flux paste type, soldering fluxliquid type, thimble 14mm copper 10 pcs in pkt, thimble15mm copper 10 pcs in pkt, thimble 16mm copper 10 pcsin pkt, thimble 17mm copper 10 pcs in pkt, thimble18mm copper 10 pcs in pkt, thimble 19mm copper 10 pcsin pkt, tie clam plastic 03mm x 50mm 50 pcs in pkt, tieclam plastic 04mm x200mm 50 pcs in pkt, tie clam plastic05mm x 50mm 50 pcs in pkt, tie clam plastic 6mm x300mm 50 pcs in pkt, wire terminal copper size 18 50 pcsin pkt, wire terminal copper size 18a 50 pcs in pkt, ringterminal copper size 4a 50 pcs in pkt, ring terminalcopper size 5a 50 pcs in pkt, ring terminal copper size 6a50 pcs in pkt, ring terminal copper size 8a 50 pcs in pkt, wire push thimble female copper 50 pcs in pkt, wire pushthimble male copper 50 pcs in pkt, bush 236 brass, bush7167 011 brass, bush 430s brass, bush 031 031s brass, bush 471 brass, bush 057 brass, bush 1088 brass, bush235 brass, bush egt inner brass 6316, bush egt outerbrass 058, coupler 1 pin male and female 10 set in pkt, coupler 2 pin male and female 10 set in pkt, coupler 3 pinmale and female 10 set in pkt, battery 9 volt, screw fordash board with lock, oil pressure transducer, selectorswitch, element contact no, hrs meter 24 v, hrs meter12 v, tail light assy led lh tata, illumination lamp assy24 v, illumination lamp assy 12 v, round lamp alu, cabin light 24v, cabin light 12v, fog light 12 v, fan 24v remi, wiper blade 22 inch, wiper blade 17 inch, keyswitch

Central Government/Public Sector

TRN :35364556 | 22 Sep, 2025

Tender Value : 25.0 Thousand

New Delhi - Delhi

Tender for gem bids for ordnance, loom tape big, insulation tape, clip, push button, wire pipe 8mm, wire pipe 10mm, wire pipe 12mm, wirepipe 14mm, thumble, window glass, lt wire 4mm, ribits bolt, lt wire 8mm, cabin light, rubberbidding, outer handle, inner handle, head lightframe, head light bulb, head light cover

Central Government/Public Sector

TRN :35364683 | 22 Sep, 2025

Tender Value : 50.0 Thousand

Sriganganagar - Rajasthan

Tender for gem bids for stearing, stearing column rod, fog lamp lh, fog lamp rh, warning harness, map reading light, field coil, tapped cover gasket, high pressure pipe, air filter, harness cable, hose outlet, oil filter

Central Government/Public Sector

TRN :35365135 | 22 Sep, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for bid number gem2025b6673881 dated 11-09-2025 bid document1 41 1 1 self tapping screws with ppdm washer 50mm long, weldingrod pkt of 100 electrodes, metal cutter disc 6 inch dia, metal cutting disc 14 inch dia, ms square pipe 1 ft 5 inch x1.5 inch thickness 5mm, plywood commercial 18 oblique19mm bwr 8 ft x 4 ft, pvc insulated sheathed unarmouredcable 10sqmm twin core aluminium conductor isi markedwith working voltage upto 1100 volt roll of 90 mtrs, synthetic enamel paint high gloss superiour quality whitecolour, synthetic enamel paint high gloss superiour qualitygreen colour, synthetic enamel paint high gloss superiourquality black colour, synthetic enamel paint high glosssuperiour quality wooden primer, thinner, iron angle 10 ftlong thick of size 50mmx50mmx3mm, pvc sheathedunarmoured stranded copper conductor cable of size2.5sqmm conforming to isi marked 90m roll, mcb 32 ampdp 240 volts, pvc sheathed unarmoured stranded copperconductor cable of size 4sqmm conforming to isi marked90m roll, mcb 32 amp 4p 240 volts, bricks sub class b oldsize best locally available minimum compressive strength75 kg oblique sqcm water absorption not more than 20percentage, ordinary portland cement 43 grade in hdpebags of 50kg each confirming to is 269-1976, coarse sanddimapur sand conforming to is 383 -1978, coarseaggregate crushed stone 20mm graded conforming to is383-1979, non skid ceramic coloured tiles of size 600mm x600mm x 9-10mm thick, glazed ceramic coloured tiles ofsize 300mm x 300mm x 7-8mm thick, led batten surface 4ft long 18w output 1600 lumens per watt with suitablepowder coated frame end caps and connector, changeover switch 32 amp two pole, led bulb 13w 220-240 volt, led bulb 18w 220-240 volt, pvc insulated sheathedunarmoured cable 6sqmm twin core aluminium conductorisi marked with working voltage upto 1100 volt roll of 90mtrs, plywood commercial bwr grade isi marked of size 8ft x 4 ft x 12mm thick, pr-laminated wall panelling woodenboard of size 8 ft x 4 ft x 6mm thick as approved colour foraccociated work with complete finish, cp cast copper alloybib cock long body 15mm bore, vitreous china urinal potbowl type including spreader cp waste coupling and pvcwaste pipe, nylon rope 24mm, pvc flexible pipe 25mm diagarden pipe, ppgi profiled sheet of size 10 ft x 3.5 ft0.50mm thick, hdpe sand bags of size 14 inch x 36 inchweight not less than 60 gms, ms square pipe 2 inch x 2inch thickness 5mm, exhaust fan 300mm sweepconforming to is, pvc insulated sheathed unarmouredcable 25sqmm 4 core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtrs, distemperoil emulsion acrylic distemper, painting brush 100mmstandard quality, painting brush 75mm standard quality, mild steel corrugated galvanised cgi sheet 6 ft x 3 ft 0.63mm thick isi marked, mcb 32 amp sp 240 volts, mcbdistribution box 4 way conforming to is 13032, mcbdistribution box 12 way conforming to is 13032, modularsocket outlet multi purpose 5 pin, 6 amps 240 volt isimarked, self taping screwwith ppdm washer 75mm long, binding wire, modular switch 6 amps 240 volt isi marked, ppgi profiled sheet of size 12 ft x 3.5 ft 0.50mm thick, mildsteel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mmthick isi marked, pvc sheathed unarmoured strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll

Central Government/Public Sector

TRN :35365355 | 22 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for hydraulic pressure hose, air hose, fuel pipe, highpressure pipe, hyd oil filter, hyd oil filter for tractor, fuelfilter primary and secondery, tie rod lh rh, air cleanerassy, pto oil seal, clamp, tapper roller bearing big, oilseal push rod, oil seal, axle bush, steering shaft, kingpin, spindle arm rod, hyd cylinder service kit, thrustbearing, return spring lever, hyd filter assy big

Central Government And Public Sector

TRN :35368090 | 29 Sep, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for plumbing, 4 inch swr non isi pipe plasto 2.5kg, 3 inch swr nonisi pipe plasto 2.5kg, 50mm pl pvc pipe 3mtrcommercial, 40mm pl pvc pipe 3mtr commercial, 4inch swr door bend, 4 inch swr bend plain, 4 inchswr door tee, 4 inch swr tee plain, 3 inch swrbend plane, 3 inch swr tee plane, 3 inch swrcoupler isi, 3 inch swr door bend, 3 inch swr doortee, 4 inch swr vent cowl, 3 inch swr vent cowl, 50mm pl pvc elbow, 50mm pl pvc coupler 6kg, 40mmpl pvc elbow, 40mm pl pvc tee, 40mm pl pvc fta, 4inch nicco clamp u, kaju clamp 1.25 inch upvc, 3inch swr nahani trap 4x3 hy, 3 inch swr multi trap, lubricant 250ml ls, 4 inch swr shoe bend isi, 3 inchswr shoe bend isi, 50mm pl pvc shoe bend, 40mm plpvc shoe bend, kaju clamp 1.5 inch upvc, 3 inch giclamp heavy, 4 inch swr coupler isi, 50mm pl pvctee, 1.5 inch pl cpvc pipe 13.5 sdr ft, 1 inch pl cpvcpipe 13.5 sdr ft, 0.75 inch pl cpvc pipe 13.5 sdr ft, 1.5 inch pl cpvc elbow, 1.5 inch pl cpvc tee, 1.5 inchpl cpvc coupler, 1.5 inch pl cpvc fta brass, 1.5 inchpl cpvc mta brass, 1.5x1 inch pl cpvc reduser, 1.5x1 inch pl cpvc r tee, 1.5x1 inch pl cpvc r-bush, 1inch pl cpvc elbow, 1 inch pl cpvc tee, 1 inch plcpvc copler, 1x0.75 inch pl cpvc r tee, 1x0.75 inchpl cpvc reducer, 1x0.75 inch pl cpvc bush, 0.75 x 0.5inch pl cpvc brass elbow, 0.75 x 0.5 inch pl cpvcbrass mta, 0.75 x 0.5 inch pl cpvc brass fta, 0.75inch pl cpvc elbow, 0.75 inch pl cpvc tee, 0.75 x 0.5inch pl cpvc brass tee, 0.75 inch pl cpvc copper, 1.5inch pl cpvc ball valve, 1 inch pl cpvc ball valve, 0.75 inch pl cpvc ball valve, 1.5 inch pl cpvc union, 1 inch pl cpvc union, 0.75 inch cpvc union, 1.5 inchpl cpvc shoe bend, 1 inch pl cpvc shoe bend, 0.75 /bid number: gem/2025/b/6680369* /dated: 13-09-2025 & & / bid document1 / 66 inch pl cpvc shoe bend, cpvc solution 250ml, kajuclamp 1.5 inch cpvc, kaju clamp 1 inch cpvc, kajuclamp 0.75 inch cpvc, 0.75 inch pl cpvc step overbend, cera metropole 40mm f8010111c, cera flushcock body f4060101, cera flush cock platef1015751, cera chevron concealed cistern, ceracontrol plate b1120101, cera cistern compassb1020106, cera wyh campbell s104313137 w, ceraconcealed comod s1053103, cera one piece capstan, cera divertor hf f4030101, cera wall mountedhot and cold mixer f4065103, cera upper plate hotand cold kit wall mounted f1015473, cera sensorjents urinal s4010102, cera ladies urinal s4040101, cera down plate victor 1015721 h, cera sesnordeck mounted high neck f601, cera 21 inch op whitecalina, cera con body victor f1015361, cerashower 8x8 f7010503ab, cera diverter 5 wayf8015743 ch, cera angle cock vic, cera 2 way bibcock vic f10151, pvc connection 18 inch jsn heay, cera hand shower f730101abta, cera h faucetf8030105 ab hy, cera button spout f1019662, jetspray multi, ancor bolt 88 exhy, rack bolt hy, basin west coupling extra heavy, tapelon tape, birla white cement, cera 2 way wall mixer f101540, pressure pump tesla with tank, havelees gyseer, cera basin caffie, bath tub size 5x2.5 with ss framejacuzzi system with 1.5 hp pump, shower head 3 way2x2, jaq shower pannel shp-wh-st861, steiner 1.5inch king brass, shower tube h 1.5 mtr hevy, jaq 1flush flv-chr-1073c, jaq 1 flush plate, body jetshower, hp printer m329dw, speaker audimex 180w15 inch woofer

Central Government/Public Sector

TRN :35368955 | 27 Sep, 2025

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for gem bids for electric wire 2 pt 5 sqmm double core each roll 90 mtrs, electric wire 04 sqmm double core each roll 90 mtrs, retroreflective tape red colour 3 inch 25 mtrs lengh each roll, retro reflective tape white colour 3 inch 25 mtrs lengh eachroll, ben pipe for heat king bukhari

Central Government/Public Sector

TRN :35369766 | 23 Sep, 2025

Tender Value : 65.0 Thousand

Udhampur - Jammu And Kashmir

Tender for gem bids for hero, front brake shoe hero honda, rear brake shoe herohonda, tappet cover seal hero honda, brake shoe springhero honda, dickey box loc hero honda, tool box kit lockhero honda, tappet cover seal royal enfield, spark plugconnector royal enfield, battery strap royal enfield, brakelight spring royal enfield, battery box lock royal enfield, air pressure fan belt, pressure hose pipe, pressure pipeconnector 8mm and 10mm mix, battery terminal post rod, air pressure pipe nozzle, reverse gear buzzer, batteryterminal, spanner set stanley, impact screw driver, monkey spanner, installation of items in active counterinsurgency area

Central Government/Public Sector

TRN :35370627 | 22 Sep, 2025

Tender Value : 64.0 Thousand

Ri Bhoi - Meghalaya

Tender for gem bids for spare, knob gear shifting lever, lock nut, bulb for above24 v 21 w bai ss, hose pipe, washer sealing 14 mm, master cyl power unit clutch master cyl, repair kitmsp3, wheel cyl assy, spark plug m14w5dc, kit rrbrake shoe lining, clutch slave cylinder, chaintensioner, kit caliper major, spacer tensioner, fuel deliver valve, clutch cover assembly, blub h412v 55 60 w, relay, taper roller bearing

Related Searched Keywords : pipe tap

List of pipe-tap Tenders

Tender for gem bids for stearing, stearing column rod, fog lamp lh, fog lamp rh, warning harness, map reading light, field coil, tapped cover gasket, high pressure pipe, air filter, harness cable, hose outlet, oil filter

Tender for gem bids for electric wire 2 pt 5 sqmm double core each roll 90 mtrs, electric wire 04 sqmm double core each roll 90 mtrs, retroreflective tape red colour 3 inch 25 mtrs lengh each roll, retro reflective tape white colour 3 inch 25 mtrs lengh eachroll, ben pipe for heat king bukhari

Get pipe tap Tender Alert...

Related Searched Keywords : pipe tap

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us