Filters

List of note Tenders

List of latest note Tenders in Indian Tenders. Click on any note Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for note Tenders.

All-Tenders (186)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49021106 | 21 May, 2025

Tender Value : 1

Mysore - Karnataka

Tender for tender for providing architectural, design consultancy including project management services for construction of multipurpose building and trainee hostel with vip transit house building at beml township, mysuru; 1 basic engineering shall include topographic survey, complete building layout and plan for both the buildings (multipurpose building & trainee hostel with vip transit house) with suitability to cater the required facility & 3d walk through presentations. 03 (three) different optional layout plans in 2d with elevations, shall be presented for discussion & approvals from beml. 3d walkthrough presentations to be made for approved /corrected option. the selected one option shall be used for detailed design and execution. i) 15 days from scheduled date of commencement of work for submission of building layouts in 2d 20% of the total quoted amount shall be paid on completion of jobs mentioned at sl. nos (i) & (ii) (ii) 21 days from the date of acceptance of plant layout by beml for submission of 3d walk-through presentation. 2 soil testing and borewell points: (i) conducting soil testing in both the locations by a reputed agency and submission of the report. (ii)hydrogeological investigation for identification borewell points on both the locations and submission of the report. 30 days from the date of commencement mentioned in the po. 10% shall be paid after completion of soil testing and submission of report 3 complete design / calculations & detailed engineering for multipurpose building & trainee hostel with vip transit house sufficiently rigid to take wind & seismic load as applicable in that area and shall also include analysis and design of civil, architectural and structural for foundation structures, drainage system, roads, waste water treatment plants, firefighting system, mechanical works like interiors, air-conditioning, furniture, electrical works including substation, dg set, dg room, & allied required works, utility services pump house, ug sump, oht, rain water harvesting, garden , drinking water system, sanitary lines, office area, material store etc., complete for all that is required as per the required mentioned in the page 13 and 14. the above description is for information purpose and beml ltd., may add or delete additional utilities, facilities, during the tenure of the project. the green building concept may be opted in the design, wherever applicable. preparation and submission of estimates based on latest mes ssr & market rates, boq, detailed specification and assisting m/s beml ltd., for finalization of contract for execution. 4 liasoning works: i)preparation & submission of all relevant documents and obtaining approvals/license from mysuru city corporation authorities, forest department, electricity board, or any statutory approval from govt. bodies/quasi/local acts as required before starting of project and after completion of the work for completion of the project in all respects. note: beml ltd., shall pay all the statutory fees/payments as applicable to the concerned agencies / departments on production of documentary proofs. concurrent activity 10% of the total quoted amount shall be paid on submission of the approvals/license from the statutory bodies before execution. 10% of the total quoted amount shall be paid on submission of the approvals/license from the statutory bodies after completion of the project. 5 third party design certification: preparation & submission of all relevant documents and obtain approvals from third party certification for structural design calculations from iit’s/iisc. concurrent activity 10% of the total quoted amount shall be paid on submission of the certification report. 6 project monitoring: preparation and release of good for construction drawings, 3d views for interior works (as hard copies and soft copy -03 copies), preparation of pert chart activity wise using software and monitoring of weekly progress by submitting the progress report. the consultant has to verify, certify the quality and quantities or any relevant document essential for the rar & final bills claimed by executing contractor/s before those bills are submitted to beml ltd., the consultant has to prepare/certify deviation order, rate analysis for non-tender items, if any and completion certificate for executing contractor/s.

Local Bodies

TRN :49021824 | 17 May, 2025

Tender Value : 42.42 Lacs

Davanagere - Karnataka

Tender for corrigendum : tender for annual supply of stationery, forms, registers, cleaning agents, printing materials and other necessary store items to city corporation office for the year 2025-26 - form no 55, 100pages pad equal to1 no,trade license form, 100pages pad equal to1 no,kmf-50 accountancy register,kmf-60 advance register,resolution book,trade license notice 1plus 1, 100pages pad equal to 1 no,kmf-26a register trade license demand book,supply of xerox papers a3 size (80gsm),supply of xerox papers legal size (80gsm),supply of xerox papers a4 size (80gsm),supply of tapal file board (best quality foldable).,supply of lase file.,supply of box file,supply of single hole punching machine,supply of gum bottle camel (250ml),supply of ink pad (medium),supply of spiral binding book (40 pages),supply of uniball pen (green/blue/black),supply of add gel pen (green/blue/black),supply of bangalore mudranalaya table calendar (2026),supply of bangalore mudranalaya wall calendar (2026),supply of stapler machine 10inch no,supply of stapler machine 24inche no,supply of stapler 10inches pin,supply of stapler 24inches pin,cl register,case register mar-4,case worker diary mar-19,case worker personal register mar-94,muddam register mar-9,birth and death application form 100pages pad equal to 1 no,e-asthi application form 100pages pad equal to1 no,aknowledgement form 1 plus 1. 100pages pad equal to1 no,kmf-24 register / b-khata register,kmf-25 register,kmf-15 register,kmf-22 form 100pages pad equal to 1 no,kmf-58 register / log book,kmf 48 register,kmf 49 register,kmf 45 register,kmf 46 register,kmf 53 register,kmf 65 register,kmf-59 form 100pafes pad-1 no,pump house log book,indent book 1plus 2. 100pages pad equal to1 no,sas notice 1 plus 1. 100pages pad equal to 1 no,water notice book 1 plus 1. 100pages pad equal to 1 no,form no 54, 100pages pad equal to 1 no,lifebuoy or branded company hand wash liquid 200ml,fen oil 1 liter good quality,broom monkeys branded,toilet brush branded company,pen stand branded company,steel cup and cap branded company,steel tray branded company,plastic tray branded company,steel tank. 20 ltr branded company,steel jug. 2 ltr branded company,cup and saser. branded company. good quality,vacuum cleaner,both room freshener good quality,jaala stick,harpick 01 ltr,tapal box with belt bag,medium size plastic dust holder,aluminum ladder 8 feet,khata file wrapper,file wrapper thick,file wrapper thin,postal cover 10l and 24b,postal cover 12l and 30b,office note first sheet,office note second sheet,table cloth 6l and 4b inches size blue and red color woolen cloth,red color cotton cloth good quality,yellow color cotton cloth good quality,green color cotton cloth good quality,white color cotton cloth good quality,hand cloth 1.6l and 2b in inches size white &color cotton cloth.(napkin),big size towel 3l 5b inches,lotion tablets. round shape. good quality,tharmas flask 1 ltr capacity. branded company,tharms flask half ltr capacity. branded company,wall clock. citizen or equivalent,godrage locker (7 lever),mop. branded company. good quality,door mat size 3l and 1.5b inches make in cooknut fiber,fiber bucket 10 ltr capacity round shape bucket,fiber jug.1 ltr capacity round shape with hand backet,air weik room sper freshaner 250 ml,attendance register

Central Government/Public Sector

TRN :49022670 | 13 May, 2025

Tender Value : 0

Samastipur - Bihar

Tender for supply of 13 pin uic coupler plug assembly consist of 1.3 mtrs cable and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev-2 note-uic plug as per clw drawing no - clw/es/3/sk-4/0047/e similar to schaltbau part no - uic st 13p eo d2 and polyamide conduit as per rdso specification rdso/pe/spec/ac-0138-2009 rev-213 pin uic coupler plug assembly consist of 1.3 mtrs cable and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev-2 note-uic plug as per clw drawing no - clw/es/3/sk-4/0047/e similar to schaltbau part no - uic st 13p eo d2 and polyamide conduit as per rdso specification rdso/pe/spec/ac-0138-2009 rev-2,13 pin uic coupler plug assembly consist of 1.3 mtrs cable and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev-2 note-uic plug as per c lw drawing no - clw/es/3/sk-4/0047/e similar to schaltbau part no - uic st 13p eo d2 and polyamide con duit as per rdso specification rdso/pe/spec/ac-0138-2009 rev-2 [ warranty period: 30 months after th e date of delivery ] ]

Central Government/Public Sector

TRN :49022819 | 21 May, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for supply of bolster land surface linerbolster land surface liner,bolster land surface liner of size [105x24x3 mm] as per drawing no. jhs/sk-2441, s.no.7. material is silico-manganese steel to is-3885, part-1 (reaffirmed-2022), gr iv. note :(i) all silico- mangan ese liners shall be marked for manufacturer initial and month and the year of manufacturing by metal laser engravin g in 6 mm size and 0.1 mm minimum.(ii) liners shall be fitted in such a way that marking lies on opposite to wearing surface. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] => limited

Government Departments

TRN :49022896 | 26 May, 2025

Tender Value : 0

Noida - Uttar Pradesh

Tender for tender for licensing of inside station advertisement rights at 09 (nine) metro stations in nmrc network - license fee in terms of per sqm per month rate for 1st year of license period in rupees, payable to nmrc 2 sec – 50, sec – 101, sec – 81, sec – 83, sec – 144, sec – 145,sec – 147,sec – 148& gnida 3 note:- 4 a) bidder must fill their financial quote in terms of license fee rate per sqm per month for the minimum chargeable area mentioned in the table – 1 of rfp. 5 b) the selection of successful bidder will be done of h1 financial quote basis among all financial quote received with respect to nmrc’s reserve price 6 c) potential bidder must quote financial offer in terms of license fee rate per sqm per month against the offered space. 7 d) the quoted license fee rate will be escalated @ 6% annually on compounding basis

Central Government / Public Sector

TRN :49023081 | 29 May, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for supply of supply and installation of waterless urinal in electric locomotivesupply and installation of waterless urinal in electric locomotive,supply and installation of waterless urinal in electric locomotive as per drg no. wcr/tkd/el /3-gen- 105 confirming to rdso frs no. rdso/2023/el/frs/0034 (rev-0), enclosure made of ss-304, puff filled wall panels arrangement with powder coated & matt finish with (1)door handle, (2)door latch, (3)led light, 8w, 110 v, fitting inside from icf / clw approved source, (4)exhaust fan, 24 w,110v (5)grade ss 30 4 wall mounted enclosure fitted with perfume dispenser air freshener. .note: dimensions tolerance +/- 50 mm in height as per the availability of the space in the locomotive. [ warranty period: 30 months after th e date of delivery ] ] se(trs)/angl, ecor odisha 14.00 set

Central Government / Public Sector

TRN :49023140 | 29 May, 2025

Tender Value : 0

Waltair - Andhra Pradesh

Tender for supply of twin beam led head light for wap7/wag9twin beam led head light for wap7/wag9,twin beam led head light for wap7/wag9 type three phase electric locomotive as per rdso specification no. rdso/2017/el/spec/0134 (rev-03) issued on 13-06-2024 or latest. note: each set consisti ng of 02 units. [ warranty period: 60 months after the date of delivery ] ] se(trs)/angl, ecor odisha 46.00 set

Central Government/Public Sector

TRN :49023542 | 05 Jun, 2025

Tender Value : 0

Ahmedabad - Gujarat

Tender for supply of (hassdac) high availability single section digital axle counters(hassdac) high availability single section digital axle counters,high availability single section digital axle counters (hassdac) with dual sensor system as per rdso/spn/177/2012 version 3 or latest. thi s includes the supply of high frequency web mounting type tx coil/rx coil, vr/pr box duly wired, vital relays, pr relays, clamp with deflector plates & har dware. dual display reset box with auto resetting facility, surge voltage protection devices and filter card to be mounted on din rail etc as per oem for co mplete installation & testing & commissioning of (hassdac) system note; one set of hassdac system will include equipment required to monitor one u p line or one dn line of a full block section between two stations. [ warranty period: 30 months after the date of delivery ] ] , high availability single section digital axle counters (hassdac) with dual sensor system as per rdso/spn/177/2012 version 3 or latest. thi s includes the supply of high frequency web mounting type tx coil/rx coil, vr/pr box duly wired, vital relays, pr relays, clamp with deflector plates & har dware. dual display reset box with auto resetting facility, surge voltage protection devices and filter card to be mounted on din rail etc as per oem for co mplete installation & testing & commissioning of (hassdac) system note; one set of hassdac system will include equipment required to monitor one u p line or one dn line of a full block section between two stations. [ warranty period: 30 months after the date of delivery ] ] senior section engineer (signal/store) gujarat 1.00 set , high availability single section digital axle counters (hassdac) with dual sensor system as per rdso/spn/177/2012 version 3 or latest. thi s includes the supply of high frequency web mounting type tx coil/rx coil, vr/pr box duly wired, vital relays, pr relays, clamp with deflector plates & har dware. dual display reset box with auto resetting facility, surge voltage protection devices and filter card to be mounted on din rail etc as per oem for co mplete installation & testing & commissioning of (hassdac) system note; one set of hassdac system will include equipment required to monitor one u p line or one dn line of a full block section between two stations. [ warranty period: 30 months after the date of delivery ] ] senior section engineer (const.) sabarmati, gujarat 1.00 set

Government Departments

TRN :49023569 | 14 May, 2025

Tender Value : 0

Visakhapatnam - Arunachal Pradesh

Tender for supply of heavy duty copper crimping socket 16 sqmheavy duty copper crimping socket 16 sqm,heavy duty copper crimping socket 16 sqmm [ warranty period: 30 months after the d ate of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , heavy duty copper crimping socket size 150 sqmm with 16sqmm stud hole suitable for 150 s qmm ebm copper cable make- ascon/dowells/chetna [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , heavy duty copper crimping socket size-95sqmm with 16mm stud hole suitable for 95sqmm ebm cable make- ascon/dowells/chetan [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , 70 sq mm copper crimping socket (lug) l type (90 degreee bend) as per icf specification no. edts 105 rev-e amndt 1,2&3, as per rcf drg no. lw71329 for earth termination. make :- kamlesh/ chetna/ dowells/ ascon/ jaico/ jaison/ kmw/ multi/swastik. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , 95 sq mm copper crimping socket with 90 degree bend as per spec. no : edts-200, i tem no.19 for lhb coaches. make/brand: ascon/chetna/kamlesh industries/venus/brass coppe r and alloy india limited [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , copper crimping socket for 25sqmm cable [ warranty period: 30 months after the da te of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] , : led light fitting for corridor, doorway & gangway area for conventionalac/non ac & lhb non ac coaches & passanger area (cabin) of conventional & lh b non accoaches & conv. non-ac/ac chair car coachesas per drawing/spec. rdso/pe/spec/tl/0 091-2016,rev-1, as per drg no. cc76453, type-b1 (9 watt), rcf, annex-1. note: material procured thr oughicf/rcf/mcf/rdso approved vendor list only. make : dr auto, ensave, rt vision or rdso approved s ources [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Related Searched Keywords : note

List of note Tenders

Get note Tender Alert...

Related Searched Keywords : note

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us