Filters

List of ms-steel Tenders

List of latest ms-steel Tenders in Indian Tenders. Click on any ms-steel Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-steel Tenders.

All-Tenders (57)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :36099961 | 01 Jan, 2026

Tender Value : 11.68 Lacs

New Delhi - Delhi

Tender for gem bids for "providing and fixing stainless steel (grade s 304) sheet cutouts with the light facing towards the background and foreground in dark embossed letter to be fitted on main stone signage present on press enclave road. " providing and fixing qutab golf course signage at main entrance gate made up of acp sheet fitted on mild steel frame, embossed acrylic back lit letters. frame will be fix on ms triangular truss steel pillar side pillers embedded into the ground for atleast 4 feet and fixed with concreting. ms triangular truss steel pillar frame having atleast 15 ft clear height from ground and signage having top face size of approx 22 feet wide and 3 feet high, and 1.5 feet x 4 feet approx on both the sides. providing and fixing qutab golf course signage at main entry of clubhouse building having size approximately 15 feet x 2.0 feet made up of acp sheet on ms frame back lit embossed acrylic letters all complete with necessary acp sheet on ms frame back lit embossed acrylic letters all complete with necessary fittings. providing and fixing driving range signage board of size approx 21 feet x 1.5 feet made up of acp sheet on ms frame back lit embossed acrylic letters all complete with necessary fittings. providing and fixing qutab golf driving range signage on side wall of new club house building on ramp towards golf driving range made up of acp sheet on m.s. frame with back lit embossed acrylic letter. providing and fixing 3 inch ms pipe with powder coating acp sheet with acrylic letters backlit with leds installed on rcc base and fixed at site with all connections and completing & installation all complete as per the directions of engineer in charge.

Central Government/Public Sector

TRN :36100988 | 22 Dec, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for misc, plywood for general purposes marked to is 303 v3 q2 bathroom cabinet ptmt of size 450x350 mm bathroom cabinet ptmt of size 500mm x 400 mm withhanging system bathroom cabinet ptmt of size555mm x 350 x 120 mm beading wooden 15 x 15mm cement base paint snowsom corner beading teakwood 05 x 6 feet long corner shelves glass withcp guard rail of 6 mm thick 200 x 200 mm cushionsofa of size 21 inch x 22 inch x 4mm thick x 40density with cover glass frosted of size1200x1200 in thickness of 4mm glass plain of size1200x1200 in thickness of 4mm glass plain of size1800x1800 in thickness of 4mm glass putty oilbound stanadard quality glass shelf corner forbathroom of size 250 x 250 mm with cp guard glass shelf corner for bathroom of size 300 x 300mm with cp guard glass shelf of size 450 x 125 mmwith cp double protection rail glass sheet size1200 x 900 mm 3 mm thick glass sheet size 1200 x900 mm 4 mm thick looking mirror of size 1220mm x420mm x 4mm with wooden frame looking mirrorof size 450 x 600 glass thickness 5 mm with itchingand studs without frame looking mirror of size720mm x360mm x 4mm thick with wooden frame looking mirror shelf with guard rail ss of size450x 125 mm magnet catcher 50mm or 75mm mdfboard high density of size 8x 4x 9 mm mdf boardhigh density of size 8x 4 x 6 mm mdf board of highdensity of size 8 x 4 x 12 mm thick mdf board ofsize 8x 4 of 18 or 19mm thick paint apex white 1ltrpack paint hi glossy enamel paint black 1 ltr pack paint hi glossy synthetic enamel paint gray 1 ltrpack paint og synthetic 1 ltr pack paint synthetic bid number gem2025b6900815 dated 11-12-2025 bid document1 132 0 0 enamel white 1 ltr pack, paint weather coat white1 ltr pack, plate rack ss of size 36 x 36, plate rackstainless steel of size 24 x 30 x 10, plate rackstainless steel of size 24 x 24 x 10 of 0.8 mm thick, plate rack stainless steel of size 31x30x10, platerack stainless steel of size 31x36x10, plate rackstainless steel of size 36 x 24 x 10 of 0.8 mm thick, prelaminated particle board exterior grade 19 mmthick of size 8ft x 4 ft, prelaminated particleboard exterior grade of 12 mm thick of size 8 x 4 ftbtf, prelaminated particle board exterior grade of12 mm thick of size 8ft x 4 ft ostf, veneeredplywood 3mm teakface size of 8 x 4, veneeredplywood 4mm teakface size of 8 x 4, water storagetank 500 ltrs double layer isi mark, water storagetank of capacity 1000 ltrs double layer isi mark, water storage tank of capacity 5000 ltrs 3 layer isimark, water storage tank 200 ltrs with lid doublelayer isi mark, water storage tank 2000 ltrs withlid double layer isi mark, water tank cover 1000ltr 3 layer for maintaining of water temprature isimark, water tank cover 500 ltr with pvc screwand hinges isi mark, glass frosted of size 1800x 1200mmx 4mm thick, glass plain 1800x 1200x 4mm thick, glasssheet plain size 1800x900x3mm thick, looking mirror ofsize 600x600x4mm thick, plastic paint 1ltr pack white, shelf mirror 800x600mm, gi union 25 mm isi marked, gi union of size 20 mm isi mark standard quality, helical door spring ms of standard size with rail, hydroulic for chair revolving, jet sparay cp brasswith 1.5 m tube, jet spray l type cp with 1m and 1.5mtube, knob ss 20 to 25mm, m seal, mortice lock 6lvr with ss plate, ms hook for gi pipe 15 or 20mm, pvc board 18mm thick x 8 x 4, pvc board 20mm thickone side pre lam and other side plain size 8 x 4, pvcelbow 50mm, pvc pipe 50mm 10 feet long, pvcsocket 50mm, pvc socket 110mm, readymix cementplaster bag of 40 kg, robe hook ss, sencer typeurinal pot with battery and spreader, sliding doorbolt 300 mm almn, sliding door bolt ms 250mm, solenoid valve stern 07230003 make pearl, surgical mixer cp in one hand made, taflon tape, tank nipple gi 15 mm standard quality, tank nipplegi of size 20 mm isi marked, toilet paper holder cpbrass, wall putty superior quality 1kg pack, whbfastner 12mm or 16mm, white cement, shower rosecp 15mm x 225mm dia, upvc pipe 15mm, urinal spreader15mm cp, wpc board 8x4x18mm prelaminated, bathroom body shower abs plastic, bathroombody shower brass, bathroom mirror 600x600mm, brass elbow 20mm for cpvc pipe, brass union for20mm cpvc pipe, cpvc pipe 20mm, ms door boltaldrop bolt 250mm, door bolt sliding door ms250mm, gi pipe 25mm medium grade, glass sheet plainsize 1800x1200x3mm thick, pvc connection pipe15x450mm nozzle type, pvc connection pipe15x600mm nozzle type, urinal spreader brass fromfinish, brass door handle 200mm, overheadshower arm square 380mm with wall flange, sluicevalve 50mm, gi elbow 40 mm isi marked, gi elbow 50mm isi marked, gi elbow 80 mm isi marked, gi tee 50mm isi marked, gi socket 40mm, gi union 40 mm isimarked, gi union 50 mm isi marked, gi union 80 mmisi marked, gi plug 50 mm standard quality, gi pipe

Central Government/Public Sector

TRN :36101262 | 20 Dec, 2025

Tender Value : 0

East Sikkim - Sikkim

Tender for gem bids for constructional, cut - off wheel q3, hollow steel sections for structuraluse q4, ms shuttering plate size 1 point 0x1 point 0 mtr, ms shuttering plate size 1 point 0x1 point 2 mtr, msshuttering plate size 1 point 0x0 point 5 mtr, ms shutteringplate size 1 point 0x1 point 5 mtr, ms pipe 40mm dia, mspipe 50mm, ms pipe 75mm, ms pipe 40mm, ms pipe40mm 03 mtr, ms pipe 40mm 02 mtr, ms pipe 40 mm 01mtr, ms nut and bolt, shuttering foam, steel propsscaffolding, adjustable strip head, base plate, right anglecoupler, swivel coupler, angle iron 75x75x6mm, angleiron 65x65x10mm, angle iron 50x50x6mm, angle iron25x25x6mm, ms sheet, ms pipe round, dunnage palate, chinese nails, chinese nails d size, screw black, screw8inch, screw 35 mm, nails 17 nos, self drilling screw, cable clips, gi pipe threading die 2inch complete set, pvcfisher guttka, nails 0 point 5inch, nails 1inch, nails 1point 5inch, nails 2inch, nails 3inch, nails 4inch, nails5inch, nails 6inch, welding rod 2 point 9 x 450mm, welding rod 2 point 5 x 350mm, hacksaw blade 0 point5inch, hacksaw blade 1inch, hacksaw frame

Central Government/Public Sector

TRN :36086043 | 20 Dec, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse confirming to , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , hard core of broken stone aggregate of size 45 to 63 mm , tmt steel bar 12mm dia , binding wire 20 gauge 0 point 9 mm annealed , pre cast pcc block type c1 , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8feet x 5feet , trowels as per isi mark , water level pipe 4mm 15 mtr long , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , gum boot , hand gloves rubber , drilling machine portabled , steel cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , portable generator set 5 kva , welding rod , welding goggles , welding gloves , portable concrete pump , 10 kl underground fol storage tank , columns , trusses , purlins , roof sheet , ms plate 5 mm thick , ms angle iron , self tapping screw 4 inch , self tapping screw 3 inch , industrial fuel transfer pump , electric wire 2 point 50 sqmm , modular switch and socket combination 05 amp , lightening conductor , pvc pipe 110 mm dia , pvc flexible hose water pipe 20 mm dia , gi elbow 20 mm , gi gate valve connector , gi socket 20 mm with thread , gi union 20 mm , fire extinguisher

Central Government/Public Sector

TRN :36088755 | 20 Dec, 2025

Tender Value : 0

Mathura - Uttar Pradesh

Tender for gem bids for insulated cutting plier size 210mm 8 inch, screw driversize 904ibt comma 903 and 905, clamp meter with metravipro421 trms ac and dc digital, 818 corded electric testersize 1000v and 200mm, tool bag, hammer with handlesize 800 gm, fiber sheet plastic size 1and half feet, lugs70 amp copper, steel bolt size 3 inch, nut with bolt ironsize 2 and half inch, steel plan washer, soldering paste, bolt with nut iron size 2 inch, water bottle 20 ltr, wirecopper size 16 mm, lugs 35 amp copper, crocodile cliplarge, electrical cable wire thimble size 6mm nos 100piece each packet, drill bit set hand tool kit nos 50 toolseach set, name plate board size 6 inch by 12 inch, flexboard with ms frame size 4 inch by 3 inch, 2 core cablewire round size 16 mm

Central Government/Public Sector

TRN :36093302 | 18 Dec, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for stainless steel shoe rack q3 * * // ./ ./ % %/years of past experience required forsame/similar service1 year s 1 1 % % 7 87 8 /mse exemption for years of experienceand turnoveryes | complete& % & % 1 1 % % 7 7 / startup exemption for years ofexperience and turnoveryes | complete : : & & /document requiredfrom sellerexperience criteria*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer< < > > ? ? @ @ & > & > a a > > @ @ c c? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & g g h h / minimum number ofbids required to disable automatic bidextension3 h /bid number: gem/2025/b/6975708@ /dated: 08-12-2025 & & / bid document1 / 8 @ >@ > h h, , . . -- / / number of days for which bidwould be auto--extended7 < a < a @ @ @ @ / /number of auto extension count2 t %t % @: @: @ @ /bid to ra enabledno 7 7 /type of bidtwo packet bid u u & w & w /time allowed for technicalclarifications during technical evaluation2 days / / g g x x / / 7 7 / % % a > a > ? ? /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u x x /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail g /requiredno /epbg detail g /requiredno @ / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes \ ^ % a7, @ u l1+x% a /purchase preference to mse oems available uptoprice within l1+x%152 / 8 \ ^ a 7 7 / maximumpercentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the productoffered in the bid themselves or through resellers should have regularly, manufactured and supplied same or

Central Government/Public Sector

TRN :36080127 | 19 Dec, 2025

Tender Value : 0

East Khasi Hills - Meghalaya

Tender for gem bids for cp kitchen sink mixer, wire mesh 0.56 mm 15 mtr each roll, kitchen plate rack stainless steel 31inch x 30inch, hydraulic door closer, fancy curtain rod 3 mtr, fancycurtain bracket, ss wire mesh 0.36 mm dia 15mtr each roll1.40 mm apreture, center hole basin mixer without popupcp, bracket for curtain rod long neck, tower bolt alu 200mm, front glass shelves 500 x 125mm, tower bolt alu 150mm, glass panes 2ft x 4ft x 3mm clear glass, kitchen sinkss 940 x 460 x 203 bowl size 405 x 354 x 203 with drainboard, mortrise lock brass, sliding door bolt alu 250 mm, waste coupling for sink 40 mm, curtain rod 19 oblique20mm 3mtr long, door seal bottom, air gap rubber shield36inch x 93 cm, anti rust, black rubber, m seal in 1 kgpack, kitchen sink 610 x 460 x 203 bowl size 560 x 405 x203, cp grating rectangle slots with round grating atmiddle 150x150mm, c p waste coupling 32 mm., gi wiremesh 0.63 mm dia 15mtr each roll 1.40 mm apreture, tower bolt stainless steel 150 mm, glass pane 2ft x 4ft x4mm frosted glass, cp grating 100mm dia with rectangleslots, sliding door bolt ms 300 mm, kitchen sink bowl size560mm x 405mm x 203mm, pvc waste pipe 40mm for sink900mm long, tower bolt alu 100 mm, helical door springipssa, sliding door bolt alu 300 mm, bow handle alu 100mm, brass bow handle 150mm, brass sliding bolt 300mm, bow handle 150 mm alu, cp grating 100mm dia with onebig hole, butt hinges 100 mm, butt hinges 75 mm, urinalflat back 390x375x590mm, brass sliding bolt 200mm, cpgrating 100mm dia with normal hole, brass tower bolt150mm, brass bow handle 100mm, brass tower bolt100mm, nut and bolt for steel window for fixing of wiremesh, teflon ptfe tape roll thread seal tape, bow handle200 mm alu, door stopper alu, hasp and staple c p 100mm, bow handle 75mm alu, alu handle 125mm, decorative curtain rod finials wooden, ms angle size50x50x4mm 500mm long, knob 32 mm cup board, haspand staple cp 75mm

Central Government/Public Sector

TRN :36080266 | 19 Dec, 2025

Tender Value : 0

Mathura - Uttar Pradesh

Tender for gem bids for alumn door hings 100mm , alumn door hings 75 mm , alumn door hings 50 mm , alumn handle 100 mm , alumn handle 125 mm , alumn handle 150 mm , alumn bow handle 100 mm , alumn sliding door bolt 250mm , alumn slidding door bolt 300 mm , alumn tower bolt 50mm , alumn tower bolt 75mm , alumn tower bolt 150mm , alumn tower bolt 200mm , alumn door stoper double shoes 125 mm , door rubber seal , door rubber seal for snake guard , door stopper with rubber end for wall 150 mm , door stopper for wall , hydraulic door closer , helical door spring 300mm , ms bow handle 100mm , ms bow handle 125mm , ms butt hings 75 mm , ms butt hings 100 mm , ms tower bolt 50mm 12mm dia , ms tower bolt 75mm 12mm dia , ms tower bolt 100mm 12mm dia , ms tower bolt 125mm 12mm dia , ms tower bolt 150mm 12mm dia , ms tower bolt 200mm 12mm dia , ms tower bolt 250mm 12mm dia , ss tower bolt 100 mm round type , ss tower bolt 150 mm round type , paino type hinges 6 feet , paino type hinges 5 feet , paino type hings of open flap width 38,40 mm , ss paino type hings 32 size , ss handle 100 mm , ss handle 125 mm , ss handle 150 mm , mortise door lock handle , ss l drops round nuckle 300 mm , ss l drops round nuckle 250 mm , ss hydraulic floor spring , stainless steel sliding door bolt 300mm , auto close ss hinges for kitchen cabinet

State Government

TRN :36082470 | 23 Dec, 2025

Tender Value : 0

Thane - Maharashtra

Tender for gem bids for boq, flower bed with mattress and pillow, saline stand, patientfile pocket, examination table with foot step, three seaterwaiting chair, metal shelving rack ms, medicine cabinetdisplay type instrument cupboard, steel cup-board bigsize, office table, patient chair, three bucket wingertrolly red, blue, yellow colour, baby wheing machine digital, oxygen cylender trolly, hand wash basin with stand, dressing trolly, instrument trolly for ot

Central Government/Public Sector

TRN :36072369 | 17 Dec, 2025

Tender Value : 0

Tiruchirappalli - Tamil Nadu

Tender for supply of supply, commissioning & installation of battery operated motor trolley for broad gauge track inspection with following technical specifications 1. pay load capacity: 1 ton (2) wheels: mild steel wheels with 320 mm dia (3)transmission: through automatic gear box (4) battery : 48 volt lithium battery, minimum 100 ah (indigenous). (5 ) drive : bldc electric motor minimum 1500 watt with controller and converter. (6 ) charger : 25 amperes (indigenous) (7) brakes: drum brake system (8) base frame: stainless steel tubes (9) axle: 38 mm diameter, ms & ss made (10) bearings : bearings made from reputed isi manufacturers like skf & nrb (11) seating arrangement: comfortable 3 chairs made with stainless steel shall be arranged in front row & 3 seater sofa in second row additional seating for 3 persons shall be arranged at the back. (12) canopy: ss pipe 25 x25mm & canvas roof cover (13)running range with fully charged batteries- 80km to 100 km (14) speed: maximum speed-30 kmph. make & brand :- lakshmi, kelvin or similar

Related Searched Keywords : ms steel

List of ms-steel Tenders

Get ms steel Tender Alert...

Related Searched Keywords : ms steel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us