Filters

List of ms-frame Tenders

List of latest ms-frame Tenders in Indian Tenders. Click on any ms-frame Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-frame Tenders.

All-Tenders (36)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35365135 | 22 Sep, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for bid number gem2025b6673881 dated 11-09-2025 bid document1 41 1 1 self tapping screws with ppdm washer 50mm long, weldingrod pkt of 100 electrodes, metal cutter disc 6 inch dia, metal cutting disc 14 inch dia, ms square pipe 1 ft 5 inch x1.5 inch thickness 5mm, plywood commercial 18 oblique19mm bwr 8 ft x 4 ft, pvc insulated sheathed unarmouredcable 10sqmm twin core aluminium conductor isi markedwith working voltage upto 1100 volt roll of 90 mtrs, synthetic enamel paint high gloss superiour quality whitecolour, synthetic enamel paint high gloss superiour qualitygreen colour, synthetic enamel paint high gloss superiourquality black colour, synthetic enamel paint high glosssuperiour quality wooden primer, thinner, iron angle 10 ftlong thick of size 50mmx50mmx3mm, pvc sheathedunarmoured stranded copper conductor cable of size2.5sqmm conforming to isi marked 90m roll, mcb 32 ampdp 240 volts, pvc sheathed unarmoured stranded copperconductor cable of size 4sqmm conforming to isi marked90m roll, mcb 32 amp 4p 240 volts, bricks sub class b oldsize best locally available minimum compressive strength75 kg oblique sqcm water absorption not more than 20percentage, ordinary portland cement 43 grade in hdpebags of 50kg each confirming to is 269-1976, coarse sanddimapur sand conforming to is 383 -1978, coarseaggregate crushed stone 20mm graded conforming to is383-1979, non skid ceramic coloured tiles of size 600mm x600mm x 9-10mm thick, glazed ceramic coloured tiles ofsize 300mm x 300mm x 7-8mm thick, led batten surface 4ft long 18w output 1600 lumens per watt with suitablepowder coated frame end caps and connector, changeover switch 32 amp two pole, led bulb 13w 220-240 volt, led bulb 18w 220-240 volt, pvc insulated sheathedunarmoured cable 6sqmm twin core aluminium conductorisi marked with working voltage upto 1100 volt roll of 90mtrs, plywood commercial bwr grade isi marked of size 8ft x 4 ft x 12mm thick, pr-laminated wall panelling woodenboard of size 8 ft x 4 ft x 6mm thick as approved colour foraccociated work with complete finish, cp cast copper alloybib cock long body 15mm bore, vitreous china urinal potbowl type including spreader cp waste coupling and pvcwaste pipe, nylon rope 24mm, pvc flexible pipe 25mm diagarden pipe, ppgi profiled sheet of size 10 ft x 3.5 ft0.50mm thick, hdpe sand bags of size 14 inch x 36 inchweight not less than 60 gms, ms square pipe 2 inch x 2inch thickness 5mm, exhaust fan 300mm sweepconforming to is, pvc insulated sheathed unarmouredcable 25sqmm 4 core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtrs, distemperoil emulsion acrylic distemper, painting brush 100mmstandard quality, painting brush 75mm standard quality, mild steel corrugated galvanised cgi sheet 6 ft x 3 ft 0.63mm thick isi marked, mcb 32 amp sp 240 volts, mcbdistribution box 4 way conforming to is 13032, mcbdistribution box 12 way conforming to is 13032, modularsocket outlet multi purpose 5 pin, 6 amps 240 volt isimarked, self taping screwwith ppdm washer 75mm long, binding wire, modular switch 6 amps 240 volt isi marked, ppgi profiled sheet of size 12 ft x 3.5 ft 0.50mm thick, mildsteel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mmthick isi marked, pvc sheathed unarmoured strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll

Central Government/Public Sector

TRN :35372331 | 04 Oct, 2025

Tender Value : 0

Jaipur - Rajasthan

Tender for gem bids for rectangular mild steel ms framed dustbins, plasticdustbin with two wheel base, plastic dustbin pedal type, plastic dustbin flip top

State Government

TRN :35355189 | 27 Sep, 2025

Tender Value : 12.37 Lacs

Anuppur - Madhya Pradesh

Tender for provision for construction of rcc framed m.s. gate with rcc column and construction of r.c.c. framed brick massonary 1.75 mtr hight boundry wall based on open fotting foundation . above baundary wall fixed providing and fixing 1.2 m high gi barbed

Central Government/Public Sector

TRN :35363479 | 23 Sep, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for integrated, 55in led video wall 0.44 mm bezel gap, installation pushpull mounts with ms structure removable, video wallcontroller with audio controller 16x16, video conferencingcamera, hdmi cable 15 mtr normal 8k, hdmi cable 15 mtroptical, audio system 8 channel, speakers, all in one pci7 win 11 512 tb hdd, workstation with gpu with 34 inchcurved screen, restructure of av speaker power controland electric cables, rack with alll accessories 37u, dpduframe with surge protection and digital earthing, modification and wood work including central control room, cable tray including restructuring of ceiling frame includingducting and raceways, installation commissioningprogramming and testing

State Government

TRN :35344091 | 19 Sep, 2025

Tender Value : 83.9 Thousand

Panchkula - Haryana

Tender for pf of 1mm m.s. sheet door with frame of 40x40x6mm angle and 3mm m.s. gusset plates at the junctions and corner, all necessary fittings complete, including applying a priming coat of approved steel primer using m.s. angle 40x40x6mm for diagonal brace

Central Government/Public Sector

TRN :35349376 | 25 Sep, 2025

Tender Value : 0

Ambala - Haryana

Tender for supply and installation of retro sign board with acp 3mm sheet affixed on ms frame..

Central Government/Public Sector

TRN :35324808 | 29 Sep, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for general, tiles 300x300mm tiles 600x600mm tiles anti skid600x600mm inter locking tiles coloured pcc 60 mm thick hollow block 400mmx200mx200mm cement opc 43grade pbs roll 1 mtr and 20 mtr long water prooftarpaulin polythene 30x30 ft acrylic sheet 6x4 ft x 4mm paint black paint white paint og paint red paint yellow paint green paint red oxide paint brush 1 inch paintbrush 2 inch paint brush 3 inch paint brush 4 inch paintbrush 6 inch pvc door pvc door for toilet pvc doortoilet size 700x2000mm pvc door 700x1850mm thinner tower bolt 8 inch pp nylone rope 12mm 100 mtr long plywood 8x4 ft 6mm thick plywood 8x4 ft 12mm thick pag hood steel cgi sheet 810x2410 mm long 0 point 63mm thick ft cgi sheet 810x3050 mm long 10 ft led tubelight fitting 1x 18 or 22 w 4 ft led tube light 20 w 4 ftlong led tube light fitting 1 x 18 or 22 w 4 ft loong warm led tube light fitting 1 x18w 4 ft long complete with allaccessories including led tube rod led bulb 5 w ledbulb 9 w led bulb 9 w warm led bulb 12w led bulb18w led security light 20 watt led security light 50watt mirror led light 10 w led light 150 watt wirelesselectric bell flexible wire pvc insulated twin core of size 23or 0 point 0076 with copper conductor confirming torelevant is pvc insulated cable 1 sqmm single corecopper conductor pvc insulated cable 1 point 5 sqmmsingle core copper conductor pvc insulated cable 1 point5 sqmm 2 core copper conductor cable pvc insulatedunsheathed single core flexible copper conductor 1100vgrade of size 2 point 5 sqmm cable pvc insulatedunsheathed twin core flexible copper conductor 1100vgrade of size 2 point 5 sqmm pvc insulated service cablealuminium conductor 70 sqmm 4 core pvc switch bd 4x4inch pvc switch bd 6x4 inch pvc switch bd 7x4inch pvc bid number gem2025b6658787 dated 09-09-2025 bid document1 95 0 0 sitch bd 6x8 inch, pvc switch bd 8x10 inch, switch board, switch socket 5 amp, switch 5 amp, switch 15 amp withbox, switch 15 amp, socket 5 amp, socket 15 amp, switch socket combination 3 or 5 pin amp, switch socketcombination 5 or 3 pin 15 or 16 amp, socket 3 pin 15 or 16amps, modular switch socket combination 3 or 5 pin 16amp with box, modular socket 6 amp 2 or 3 pin combinedtwo module, modular socket 3 pin 10 amp, modular socket3 pin 20 amp, modular switch 3 pin 10 amp, modularswitch 3 pin 20 amp, plug 3 pin 5 or 6 amp, plug 3 pin 15amp top, pvc insulation tape 2 cm wide 10 mtr long, mcb6 amp sp, mcb 6 amp 240 v, mcb 20 amp 240 v, mcb 10amp sp, mcb 16 amps sp with box, mcb 20 amp sp, mcb32 amp sp with box, mcb 40 amp sp, mcb 32 amp dp, mcb 63 amp dp 240 v, isolator 40 amp dp 240 v, mcbbox metal, mcb ditribution boards in sheet metal enclosure4 ways double door with blanks confirming to is 8623, mcbdistribution bd sheet metal 8 way, mcb distribution bdsheet metal 10 way, mcb single pole 230 v ac 50 hz 16amps 10 ka confirming to relevant is suitable for lightingother domestic loads, pvc exhaust fan 250mm sweep, pvc exhaust fan 300mm iron, pvc exhaust fan 400mm, pvc exhaust fan 450mm, bed switch on off, piano switch5 amp, piano switch 15 amp, piano switch modular 10amp, piano switch modular 20 amp, white cover plate withframe 2 module, white cover plate with frame 3 module, casing caping 3 oblique 4 inch length 6 ft, pendent holder, angle holder with skirt, angle holder, button holder, change over switch 32 amp 2 pole, pvc ceiling rose 2oblique 3 terminal, ppr pipe 15 mm dea 6 mtr long, pprpipe 20mm 3 mtr long, ppr pipe 25 mm dia 3 mtr long, ppr pipe 3 layer dia 32 mm 3 mtr long, ppr pipe 3 layer dia40 mm 3 mtr long, ppr socket 40mm, ppr tee 40mm, ppr elbow 40mm, pvc elbow 15mm, pvc elbow 20mm, pvc socket 15mm, pvc socket 20mm, pvc union 15mm, pvc union 20mm, pvc socket reducer 20 or 15mm, pvcsocket reducer 20 or 25mm, towel rail cp 750mm long, toilet seat ws, syntex 1000 ltr, hdpe tank 200 ltr, hdpetank 500 ltr, water storage tank double layer 500 ltr, water storage tank double layer 1000 ltr, bib cock brass 15mm, bib cock steel 15 mm, pvc bib cock 15 mm, ptmtpiller cock 15mm, cp pillar cock 15mm, stop cock brass15mm, stop cock brass 20mm, stop cock brass 2mm, mseal 100 g each pkt, snow whit colour european wc with sor p trap concealed of size 650x405x770m with sheet cover, wc india type, wash basin, waste pipe for wash basin, vitreous china wash hand basin whb white flate back5050x400mm including coupling of ptmt 15mm deai450mm long pvc connection, whb steel, vitreous chinaurinal pot, stainless steel sink, gun metal gate valve40mm, loking mirror cum cabinet 450mm x 300mm, loking mirror cum cabinet 450mmx 1800mm, loking mirrorcum cabinet 600mmx 450mm, hdpe jerricane 20 ltrs, fireextinguisher 2 kg, laip 6 ft, saip 2 ft

State Government

TRN :35332829 | 25 Sep, 2025

Tender Value : 1.81 Crore

Prayagraj - Uttar Pradesh

Tender for gem bids for interior, bid number gem2025b6652665 dated 10-09-2025 bid document1 69 1 1 grid ceiling, gypsum ceiling, stage platform, woodenflooring, vinyl flooring, flush door, door laminate, wallpanelling, acoustic panelling, wood skirting, woodbeading, roller blinds, wall painting, cnc lettering, vinylprinting, storage cabinet, whiteboard mdf 6x4, blueboardmdf 4x2, lab whiteboard 6x4, whiteboard mdf 4x2, galaxy blueboard 6x4, pvc frame tv side 6x4, pvc framefull board 11x4, pvc frame lab whiteboard 6x4, pvcframe tv 6x4, pvc frame small 4x2, pvc frame entranceboard 6x4, whiteboard new 6x4, curtain rod set, curtains crush fabric, acrylic nameplate 16x8, decorativemirror 2.5x1.5, photo frame standard, front row deskonly, middle row desk bench cushioned, back row benchcushioned, cassette ac, ac installation cassette tower, copper piping with insulation 3 to 4 tr, drain pipe upvc 3-4inch, cable 4c x 2.5 sqmm, ms stand outdoor unit 3 to 4tr, freight hvac supply, outstation charges hvac, lightpoint wiring 7m, 2 light with 6a switch, 3 light with 16aswitch, 4 light with 16a switch, light point shifting, conduit mms fr 25mm, wiring 2x1.5 plus 1x1.0 sqmm, wiring 2x2.5 plus 1x1.5 sqmm, wiring 2x4 plus 1x2.5sqmm, earthing wire 1x10 sqmm, 6a switch socket set, 16a switch socket set, isolator 40a fp ip65, industrialsocket 20a, cable 3.5c x 70 sqmm al xlpe, cable 3.5c x50 sqmm al xlpe, cable 3.5c x 16 sqmm al xlpe, cable4c x 10 sqmm al xlpe, cable 4c x 4 sqmm cu xlpe, cable3c x 2.5 sqmm al xlpe, cable termination 3.5c 70 sqmmal, cable termination 3.5c 50 sqmm al, cable termination4c 16 sqmm al, cable termination 4c 10 sqmm al, cabletermination 4c 4 sqmm cu, cable termination 3c 2.5sqmm al, led downlight 20 to 24w, led rope light 9wper mtr, led recessed 2x2 36w, wall fan 400mm, bldcceiling fan 1200mm, exhaust fan 8 inch, removal of lightfans, installation of old light fans, chemical earthingelectrode 80mm x 3m, gi strip 25x5mm, gi wire 8g, copper wire 10 sqmm, main incomer db 12 way vtpn, main lpdb 6 way tpn, pdb 6 way etpn 63a, spn db 16way 32dp, cable tray 100x50mm, cable tray 200x50mm, cable tray 300x50mm, tray cover 100x50mm, traycover 200x50mm, tray cover 300x50mm, cat6 datacable, telephone cable 2 pair, telephone connector 20pair, telephone jack rj11, data outlet rj45, popup box3m to 4m, popup box 6m to 8m, speaker 15 inch 2 way, amplifier 2 channel 800w, processor 2 in 6 out, speakerbracket, speaker cable 2 sqmm 2 core, patch cable, connector set, mixer 16 channel analog, installation andprogramming, av rack, wireless handheld microphone, wireless lapel microphone, podium microphone, conference microphone chairman, conference microphonedelegate, conference system controller, speaker 8 inch 2way plastic, mixer amplifier 450w, speaker cable 1.5sqmm 2 core, patching cable, interactive flat pannel withops and wifi smart class, interactive flat pannel with opsand wifi conference hall

Related Searched Keywords : ms frame

List of ms-frame Tenders

Tender for gem bids for rectangular mild steel ms framed dustbins, plasticdustbin with two wheel base, plastic dustbin pedal type, plastic dustbin flip top

Tender for provision for construction of rcc framed m.s. gate with rcc column and construction of r.c.c. framed brick massonary 1.75 mtr hight boundry wall based on open fotting foundation . above baundary wall fixed providing and fixing 1.2 m high gi barbed

Tender for pf of 1mm m.s. sheet door with frame of 40x40x6mm angle and 3mm m.s. gusset plates at the junctions and corner, all necessary fittings complete, including applying a priming coat of approved steel primer using m.s. angle 40x40x6mm for diagonal brace

Tender for supply and installation of retro sign board with acp 3mm sheet affixed on ms frame..

Get ms frame Tender Alert...

Related Searched Keywords : ms frame

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us