Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of ms-cover Tenders

List of latest ms-cover Tenders in Indian Tenders. Click on any ms-cover Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-cover Tenders.

All-Tenders (38)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35137503 | 04 Sep, 2025

Tender Value : 0

Jaisalmer - Rajasthan

Tender for gem bids for barrack, acrylic shelf plain 450 mm long x 150mm wide and 5 point5 mm thick make prayag shakti cera or equivalent acrylicside corner self size 10 inch x 5 point 5mm thick makeprayag shakti cera or equivalent aium bow handle 200mmmake classic or equivalent aium hasp and staple 150mmlong alum tower bolt 200mm make classic or equivalent aluminium handle 100 mm make classic or equivalent aluminium handle 150 mm make classic or equivalent bath cabinet mirror 450x350mm make prayag shakti ceraor equivalent butt hinges 200mm butt hinges 50mm butt hinges 75mm cement bag of 50 kg each make accambuja ultratec or equivalent cp angle cock 15 mm makeprayag shakti cera seiko or equivalent cp angle cock 2way 15mm make prayag shakti cera seiko or equivalent cp bib cock 15 mm make prayag shakti cera seiko orequivalent cp bib cock 15mm with wall flange make prayagshakti cera seiko or equivalent cp bib cock 2 way 15mmwith wall flanged make prayag shakti cera seiko orequivalent cp bib cock 15mm long body make prayagshakti cera seiko or equivalent cp central hole mixture 15mm for wash hand basin make prayag shakti cera seiko orequivalent cp concealed stop cock 15mm make prayagshakti cera seiko or equivalent cp coupling 38mm dia forurinal make prayag shakti cera seiko or equivalent cpgrating 100mm with hole make prayag shakti cera seiko orequivalent cp grating 100mm without hole make prayagshakti cera seiko or equivalent cp health faucet 15mm x8mm dia 1 point 2 mtr tube make prayag shakti cera seikoor equivalent cp jet spray 15mm with 1 point 5 mtr tubemake prayag shakti cera seiko or equivalent cp pillar cock15mm make prayag shakti cera seiko or equivalent cppillar cock 15mm swan neck make prayag shakti cera seikoor equivalent cp sink coupling 50mm dia make prayag bid number gem2025b6546108 dated 14-08-2025 0 0 bid document1 81 0 0 2 2 shakti cera seiko or equivalent, cp sink mixture 15mm withregular spout wm make prayag shakti cera seiko orequivalent, cp stop cock 15 mm make prayag shakti ceraseiko or equivalent, cp telephonic shower 15mm with armsand wall flange make prayag shakti cera seiko or equivalent, cp toilet paper holder 6 inch with screw make prayagshakti cera seiko or equivalent, cp towel rail 25mm x600mm long, cp towel ring 10 x 10 inch make prayagshakti cera seiko or equivalent, cp wall mixture 15 mmtelephonic with l bend provision for over head shower, cpwaste coupling 32 mm dia full threaded make prayagshakti cera seiko or equivalent, cpvc coupling 15mmmake prayag shakti cera seiko or equivalent, cpvc elbow15mm, cpvc female adopter brass 15mm, cpvc femaleadopter plastic 15mm, cpvc male adopter brass threadsize 15 x 25mm dia, cpvc pipe 15mm 10 ft length, cpvctee 15mm, cp curtain bracket fancy type 25mm, cpcurtain bracket plain chromium plated 25mm dia fancy, cpcurtain rod 20mm dia, cp curtain rod 25mm dia, doubleaction floor spring hydraulically regulated 1 point 25 thickalum alloy sheet foundation box main body with stoppersheet make godrej ozone plaza or equivalent, epoxy resinprimer transparent for roof leakage crack seal agent, fastener 8mm x 150mm long for wash hand basin 6 pcs perset excluded washer, floor door spring alum 150mm makegodrej ozone plaza or equivalent, flushing cistern pvcbend small for ewc make prayag shakti cera seiko orequivalent, gi check nut 20mm isi mark, gi check nut25mm isi mark, gi elbow 15 mm isi mark, gi elbow 20 mmisi mark, gi nipple 15 x 100 mm isi mark, gi nipple 15 x150 mm isi mark, gi nipple 15 x 200 mm isi mark, ginipple 15 x 250mm isi mark, gi nipple 15 x 300 mm isimark, gi nipple 15 x 50 mm isi mark, gi nipple 20 x100mm isi mark, gi nipple 20 x 200mm isi mark, gi plug15 mm isi mark, gi plug 20 mm isi mark, gi reducer 25 x15mm socket isi mark, gi socket 15 mm isi mark, gisocket 20 mm isi mark, gi socket reducer 20 x 15 mm isimark, gi socket reducer 25 x 20 mm isi mark, gi tee 15mm isi mark, gi tee 20mm isi mark, gi tubing 15mm diamedium grade 20 ft length isi mark make zindal tata suryaprakash or equivalent, gi union 15mm isi mark, gi union20mm isi mark, gi union 25mm isi mark, gi wire mesh 2 ftwide, gi wire mesh 4 ft wide, grating round ss floor draintrap 5 inch 127mm make prayag shakti cera seiko orequivalent, grating round ss floor drain trap 5 inch127mm with waste hole make prayag shakti cera seiko orequivalent, helical door spring 150 mm make godrejozone plaza or equivalent, holding bracket 600mm long forwhb 24 inch, hydraulic door closer classic 90 degreeuniversal make godrej ozone plaza or equivalent, internalkit for flush cistern with dual flush pvc make prayag shakticera seiko or equivalent, internal kit for flushingcisternsingle flush pvc make prayag shakti cera seiko orequivalent, looking mirror 450 x 600 mm aluminum frameor pvc make prayag shakti cera seiko or equivalent, mshandle for window, m seal 90 gm pkt, oil putty, peg set of06 make prayag shakti cera seiko or equivalent, pianotype hinges ss 20 mm thick and 6ft long, pvc angle cock15 mm make prayag shakti cera seiko or equivalent, pvcangle cock 15 mm two way make prayag shakti cera seikoor equivalent, pvc ball cock 15 mm with ball and rod makeprayag shakti cera seiko or equivalent, pvc ball cock 20mm with ball and rod make prayag shakti cera seiko orequivalent, pvc bib cock 15 mm make prayag shakti cera //bid details2 / 81 seiko or equivalent, pvc connection 15 x 450 mm makeprayag shakti cera seiko or equivalent, pvc connection 15x 600 mm make prayag shakti cera seiko or equivalent, pvc flushing cistern 10 ltr cap make prayag shakti ceraseiko or equivalent, pvc health faucet 15mm with tube 1point 5 mtr and hook make prayag shakti cera seiko orequivalent, pvc jet spray 15mm with 1 point 5mtrsconnecting tube make prayag shakti cera seiko orequivalent, pvc overhead shower round 3 inch makeprayag shakti cera seiko or equivalent, pvc pillar cock 15mm make prayag shakti cera seiko or equivalent, pvc pillarcock 15 mm swan neck make prayag shakti cera seiko orequivalent, pvc pipe 75 or 80mm dia 3 mtr long, pvc rawlplug 50 mm and 6mm dia, pvc stop cock 15 mm makeprayag shakti cera seiko or equivalent, pvc tank cover lid, pvc toilet seat cover for ewc make prayag shakti ceraseiko or equivalent, pvc waste coupling 32mm dia fullthreaded make prayag shakti cera seiko or equivalent, pvcwaste pipe 32 mm, rubber beading 75mm wide 15mm, sink without drainage board made of ss 1mm thick forkitchen size 915 x 460mm make prayag shakti cera seikoor equivalent, sink with drainage board made of ss 1mmthick for kitchen with plugs overall size 915x460mm bowlsize 410x330x160mm make prayag shakti cera seiko orequivalent, sliding bolt handle 300mm aluminium, soapdish holder 6 inch make prayag shakti cera seiko orequivalent, ss concealed curtain socket 25mm, ss curtainsupport set 25mm, steel but hinges 150mm, tankconnection nipple 25mm, tank nipple 20mm, teflon tape20 to 40mm width 21 to 30m long, tower bolt aluminium100 mm, tower bolt aluminium 150 mm, urinal bowls flatback size full stall 440mmx365mmx355mm, vitreous chinawash hand basin size 530x425mm make hindware cera orequivalent, vitreous china squatting pan orissa pattern ofsize 580 x 440mm make hindware cera or equivalent, wallputty powder asian paints, wash hand basin 46 x 33 cmmake hindware cera or equivalent, water storage tank1000 ltr cap dl make sintex vectus or equivalent, waterstorage tank 500 ltr cap d l make sintex vectus orequivalent, white cement make birla ultratec jk white orequivalent, aluminium door stopper single, aluminiumdoor stopper double, iron pipe clip 20mm, iron pipe clip15mm, iron hook for gi pipe 15mm, iron hook for gi pipe20mm, leakage repair water proof tape 5cm x 5m alu foiltape water proof adhesive for water tank and pipe, pvcbend 75 or 80mm dia, pvc tee 75 or 80mm dia, pvcsocket 75 or 80mm dia

Central Government/Public Sector

TRN :35137520 | 04 Sep, 2025

Tender Value : 0

Barmer - Rajasthan

Tender for gem bids for barrack, looking mirror 450 x 600mm with aluminum angle framefancy type make prayag modi guard commander orequivalent stainless steel sink 1mm thick with plugswashers and wastes of size 140mmx330mm x 160mm maketasnya dimond nirali prayag or equivalent pillar cock cp15mm bore dia make cera prayag johnson or equivalent cp stop cock 15mm bore make cera prayag johnson orequivalent window glass panes plains 42cm x 27cm makemodi gurad modi float or equivalent cp bip tap long body15mm bore fancy type make cera prayag johnson orequivalent cp brass chromium plated wall mixer 15 mmbore make cera prayag johnson or equivalent windowglass panes plain 27cm x 52cm make modiguard modifolt orequivalent cp bib tap 15mm dia short body make ceraprayag johnson or equivalent brass spindle face for cppiller cock and bib cock 15 mm dia isi marked windowglass panes plain 18cm x 36cm make modiguard modi floator equivalent ms bracket for wash basin sink isi marked hydraulic door closure steel aluminuim digination no 3universal type make everest sandhu godrej or equivalent bib tap cp l shape 15mm bore make cera pragraj johnsonor equivalent cp angle cock 15mm bore make cera prayagjohnson or equivalent window glass panes plain 20cm x40cm make modi gurad modi float or equivalent pvcflushing cistern 10 ltr cap make cera prayag johnson orequivalent cp bathroom water shower abs make ceraprayag johnson or equivalent cp wash basin mixer 15mmmake cera prayag johnson or equivalent cp brasschromium plated sink mixer 15mm bore make cera prayagjohnson or equivalent cp end bulb for curtain rod fancytype vitreous china urinal bowl type flat back make cerahindware johnson or equivalent bip tap cp long bodymakecera prayag johnson or equivalent aluminum tower bid number gem2025b6547350 dated 14-08-2025 0 0 bid document1 64 0 0 2 2 bolt 150mm long make isi marked, cp bracket for curtainrod fancy type, cp health faucet with cp flexible pipe 1 mtrlong makecera prayag johnson or equivalent, 20mm floatvalve with rod and ball make prayag shakti polyuf orequivalent, cp jet spray with tube unbranded, aluminumdoor stopper with double rubber bush, pvc waste pipe 32 x800mm, pvc connection 15 x 450mm, vitreous chinawash basin hand size 550x400mm, 15mm concealed stopvalve cp brass stop cock 15mm, cp curtain rod 20mm bore6m length, pvc seat cover pedestrian for ewc, pvc waterstorage tank 500ltr capacity triple layer whiter colour makesnitex ganga diplast or equivalent, oil putty for windowglass, pvc connection 15 x 600mm, pvc water tank cover500 ltr, unbranded bowl without flushing rimfor float valve, epoxy coated alm rod ball 25mm long for float valve, ginipple 15 x 125mm bore, gi tubing 20mm 6 mtr lengthbore of 6mm length, ms butt hinges 100mm long, aluminium handle 150mm, ms handle left right for window, pvc jet spray with 1m tube, bathroom cp hand showerleaded make cera prayag jhonson or equivalent, bathroomtoilet mirror with plastic frame 450 x600mm, cp gratingwithout hole 100 x 25mm, pvc flexible waste pipe length750mm, pvc connection 15 x 750mm, aluminum slidingbolt 250mm, cp 15mm swiling shower rose make ceraprayag hinhdware or equivalent, gi nipple 15 x 150 mm isimarked, gi pipe 15mm med grade isi marked 6m length, gi nipple 15 x 300mm isi marked, gi nipple 20 x 300mmisi marked, gi nipple 20 x 200mm isi marked, gi elbow20mm isi marked, wall care putty 5 kg isi marked, gitank nipple 20mm isi marked, cp fancy tap 15mm isimarked, pvc short l bend pipe 40mm dia for ewc, pvclong l bend pipe 40mm dia for ewc, pvc water tank cover1000 ltr, gi union 20mm bore isi marked, ptmt mirrorcabinet ptmt alloy 450 x 600mm isi marked, gi nipple 15 x100mm bore isi marked, gi socket 20mm bore isi marked, jumper washer for brass bib cock, gi nipple 15mm bore isimarked, waste fitting for wash basin waste coupling 32mmmake prayad cera hindware or equivalent, gi elbow 15mmbore isi marked, gi nipple reduced 15 x 25mm bore isimarked, gi tee 15mm bore isi marked, gi socket 15mmbore isi marked, gi union 15mm bore isi marked, runningnipple steel pipe fitting 20mm bore isi marked, gi barrelnipple steel pipe fitting 15mm bore isi marked, whitecement in 1 kg pkt, gi tee 20mm bore isi marked, pvcteflon tape bore isi marked, pvc waste pipe 900mm long, gi reducer socket 20 x 15mm isi marked, plastic seats andcover for warer closets make prayag cera hindware orequivalent, gi reducer 15mm isi marked, gi union15mmbore isi marked, pvc waste pipe 75cm long wpvc counting40mm suitable for sink make prayag cera hindware orequivalent, gi tee equal 15mm bore isi marked, gi socket15mm bore isi marked, gi elbow 20mm bore isi marked, malleable cast iron pipe fitting 100mm bore 6m long, pvctape 25m long, gi union 15mm bore isi marked, plywood12mm thick 6 ft x 3 ft, paint oxford blue, cp screw wood of35x7mm pkt of 250, paint synthetic enamal black colour, hasp and staple 75mm, paint red oxide, cp steel screw50mm pkt of 250, fench polish, knob round for side boardor book case, clear synthetic varnish, paint brush 125mm, fevicol sh, paint brush 75mm, teak wood bottom, nailsno 17 without head, cloth blaze green of width 48 inch, pink primer

Central Government/Public Sector

TRN :35127483 | 26 Aug, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for revolving chair v4 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, additional doc 1requested in atc, additional doc 2 requested inatc, additional doc 3 requested in atc, additional doc 4requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6526473; /dated: 13-08-2025 & & / bid document1 / 23 ; 9; 9 d d, , n n -- / / number of days for which bidwould be auto--extended7 p %p % ;5 ;5 ; ; /bid to ra enabledyesp %p % q q /ra quali cation ruleh1-highest priced bid elimination5 5 s s /itc available tobuyeryes 4 4 /type of bidtwo packet bid t t & v & v /time allowed for technicalclarifications during technical evaluation3 days w w b b x x w w 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno t t x x /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankidbi bank /emd amount10000 /epbg detail > /advisory bankidbi bank 4 %/epbg percentage%5.00 b /duration of epbgrequired months.14a. . ^ % & 4& % & % 4 > p 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , ` w < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. 2 / 23 ` ` /beneficiary : head of department, finance.finance department, moil limited, moil bhavan, 1a, katol road, nagpur-440013 the details of beneficiarybank for sending details of bg under sfms platform is advisory bank: idbi bank, idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001, advisory bank ifsc code: ibkl0000389 & currentaccount no. 041102000018027.moil limited /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3 / 23 . reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation.revolving chair v4 84 pieces 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively v v /technical specifications v / as per gem category speci cation /speci cation v v /specificationname b b t t /bid requirementallowed valuesgeneralrequirementtype of chairmid backunderstructuretilt mechanismrevolving with back tilting, center tilt mechanism, knee tilt mechanism, knee tilt synchronicmechanism, synchronic tilt mechanism, tilt workingwith torsion bar mechanism, active bio synchromechanism, front pivot synchro tilt mechanism orhigherlocking mechanismback tilt and locking, upright locking, tilt limiter, 3position locking, 4 position locking, 5 position locking, multi position locking or higherseat depth adjustmentadjustable, fixed type or higherrevolving mechanismdesigned with 360 degree-revolving typepedestal basemild steel chrome platedseatseat materialpu foamdensity of pu used in seatkg per cubic meter>40< 50thickness of pu used inseat mm>40< 50minimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm>450< 500depth of seat mm>450< 500seat upholstery materialleatherettebackrestbackrest typeflexi back, tilting type or higherbackrest heightfixed, adjustable or higher4 / 23 backrest support typecontoured back / without lumber supportbackrest base framematerialhot pressed plywooddensity of pu used inbackrest kg per cubicmeter>40< 50thickness of pu used inbackrest mm>40< 50width of backrest mm>450< 500backrest height from theseat level> 350< 450, >450< 550, >550armrestarmrest type and armmovementfixed /speci cation v v /specificationname b b t t /bid requirementallowed valuesadditional specification parameters - revolving chair v4 84 pieces specification parameternamebid requirement allowed values1 pre-qualificationcriteria:the equipment offered by the bidder shall be considered proven provided25 nos. of quantity under procurement, quoted model or similar equipment, must have been supplied by the bidder in india to the mining industryand/or to the other industries private or govt./ public sector undertakingwithin 5 years of the date of opening of the tender and performedsatisfactorily for a minimum period of one year from the date ofcommissioning.1.1 pre-qualificationcriteria:the performance of only that equipment would be considered for assessingprovenness which have been commissioned at least one year prior to thedate of opening of the tender but not prior to five years from the date ofopening of tender. satisfactory performance certificate issued by respectivebuyer organization along with the above orders should be uploaded with thebid2 eligibility criteria:the bidder should be an manufacturer or their authorized dealer. biddershould upload registration certificate for manufacturer and tender specificauthorization certificate for authorized dealer obtained from theirmanufacturer. selling agent/dealer/distributor authorized by themanufacturer shall submit manufacturer authorization as per annexure-i, failing which the offer shall be outrightly rejected.3 warranty :warranty period of the supplied products shall be 1 years from the date offinal acceptance of goods or after completion of installation, commissioning& testing of goods if included in the scope of supply, at consignee location.oem warranty certificates must be submitted by successful bidder at thetime of delivery of goods. the seller should guarantee the rectification ofgoods in case of any break down during the guarantee period. referwarranty clause mentioned in bid document* bidders offering must also comply with the additional specification parameters mentioned above. 5 / 23 5 ; 5 ; p %p % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //p ; e p ; e /consignees/reporting officer and quantity5. .5. ./s.no. //p ; e p ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1krishnachurachakraborty440013, moil limited, moilbhawan, 1-a, katolroad, nagpur-4400138460special terms and conditions-version:1 effective from 18-06-2024 for category revolving chair v41. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices. 5 5 : : h h/buyer added bid specific terms and conditions1. buyer added bid specific atcbuyer added text based atc clauses bidder to confirm clause mentioned in buyer atc in their offer:1: the sellers/bidders who are not in the category of emd exemption:step-i: the intending bidders should submit earnest money schedule/item wise mentioned in bid documents tomoil ltd., alongwith their offer otherwise their offer will summarily rejected. emd should be deposited electronically rtgs/neft from nationalised/ scheduled bank only in the designated account as under:a: name of bank & branch: idbi bank, civil lines branch, nagpurb: account no. 0041102000038465c: ifs code: ibkl0000041 bidder to indicate bid number and name of bidding entity in the transaction details eld at the time of online transfer. bidder has to upload scanned copy/proof of the online payment transfer along with bid. bidders are requested to upload the emd details in format mentioned below. emd should be deposited in one go and exact amount should be re ected in our bank statement on or before the opening date & time of tender, failing which the o er shall be rejec6 / 23 ted outrightly. bidder should note the due date & time of closing of tender & deposit the emd well in advance in the designated account. step-ii: after remittance of earnest money as above, utr no./reference no. in case of idbi bank should be submitted by participating bidder in their o er on gem portal. the receipt of emd shall be veri ed by moilltd., against details of the utr no. /reference no. in case of idbi bank and o ers of those participating bidders whose receipt of emd is con rmed by finance department, moil ltd., shall be considered for further evaluation. in short, mentioning the correct utr no. /reference no. in case of idbi bank in their o er on gem portal is mandatory, failing which the offer shall be rejected outrightly. note: emd of the successful bidder shall be returned within 30 days of submission of performance bank guarantee/security deposit as per contractual terms or thirty days of successful completion of contract, whichever occurs earlier. emd shall be forfeited if any bidder withdraws their offer before finalization of this tender. format for submitting details of emd deposited. bid number: details required for vendor registration at moil ltd. name of bidder: bidder pan no.: bidder location of despatch/invoicing gstin no. bidder bank account no. with cancelled cheque. bidder bank ifsc code: authorised person name : mobile no. & e-mail id of authorised person: 7 / 23 sndescription of item/category correct utr no. /reference nodate amount 1revolving chair v4 q2 10, 000.00 enclosed: payment receipt towards above utr no. /reference no. signed:designation:corporate seal : 2: for emd exemption bidders: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid may refer point no.4xiii of gtc general terms & conditions with amendments, if any. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy. in absence of valid emd exemption document, the bid will be out- rightly/summarily rejected and no correspondence in this regard shall be entertained. step i: the participating bidders under this category should mandatorily mention the exemption document type in their offer on gem portal. step-ii: upload the relevant document in the upload link on gem portal. the status of mse shall be decided based on the uploaded document and if found in line then only, their o er shall be considered for further evaluation. in short, mentioning the exemption document type in their offer on gem portal & uploading the same on gem portal is mandatory, failing which the offer shall be rejected outrightly. c: psus: all central/state government organization/psus are exempted from submission of emd/sd. however, they should mandatorily mention the document type in their o er on gem portal for getting exemption and upload the relevant document with their o er on gem portal, failing which the o er shall be rejected outrightly.3: security deposit: successful bidder will have to deposit security deposit @5% of total value of order. kindly therefore remit security deposit @5% of total value of order towards amount of security deposit by way of online payment/ neft/rtgs into moil limited, current account no. 0041102000038465, idbi bank, civil lines branch, nagpur, ifsc: ibkl0000041 within 15 days from date of notification of award or placement of order.supplier has to inform the utr no. and purchase order/contract no. to the o ce of gm fin. & gm mtls., moil ltd., moil bhawan, 1a, katol road, nagpur -440013 through letter/e-mail e-mail-id of concerned dealing finance officer krs@moil.nic.in & copy to material officer ajaykolte@moil.nic.in as under:security deposit rs...........deposited on dtd.......... vide utr no............ against purchase order/contract no.............8 / 23 untill the s.d. amount is deposited, invoice shall not be treated as admissible and shall not be processed for payment. all central/state government organization/psus are exempted from submission of security deposit.this is mandatory on part of supplier to remit the security deposit & submit details to gm fin., moil ltd., moil bhawan, 1a, katol road, nagpur-440013/ on e-mail: krs@moil.nic.in within 15 days from date of notification of award or placement of order.security deposit will be released within 30 days after acceptance of material, successful installation & commissioning if required and receipt of performance bank guaranteesif applicable.4: despatch/transportation through registered common carrier: in the event you are successful tenderer and you intend to dispatch/transport the ordered material by road, it will be through registered common carrier as per guidelines mentioned in the carriage by road act 2007 and subsequent amendments if any. in case of non compliance, action shall be imposed as deemed fit, as per the above mentioned carriage by road act 2007 .5: supplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only. please provide details of contact person name, designation, mobile & e-mail id for correspondence.5.1: instruction to supplier for generating invoice:supplier to ensure that all contractual obligation is ful lled with respect to security deposit and performance bank guarantee before generating invoice on gem. pbg to be uploaded on gem and sd to be submitted within 15 days of award of contract.supplier to ensure that if possible they should upload digital e-signed supplier speci c invoice/e-invoice on gem to facilitate payment on priority.for head o ce: the material shall be despatched & invoiced from supplier s invoicing location & invoice should be generated on consignee chief manager per. moil ltd., moil bhawan, 1a, katol road, nagpur -440013 as per bid document. i.e. in the tax invoice to be issued by the supplier, ship to party & billed to party will be: consignee as per bid document with gstn: 27aaacm8952a1zl for maharashtra state supply. sndescription of item/categoryqtyaddress of consignee & gstnoff day/ authority to be contacted1revolving chair v4q284madam krishnachura palchief manager per.email: krishna.pal@moil.nic.inmobile: 7219552308moil limited, moil bhawan, 1-a, katol road, nagpur-440013, nagpur, maharashtra-440013, indiagstn: 27aaacm8952a1zl2nd saturday, 4th saturday & sunday --------------------------------------- chief manager per.moil limited, moil bhawan, 1-a, katol road, nagpur-440013, nagpur, maharashtra-440013, india 6: bidder to con rm location from where the materials shall be invoiced upto destination basis as per consignee mentioned in bid document complete address, name of the bidder company/firm along with telephone no. & fax no., name of person, mobile no., e-mail id of the bidder to be given.7: past supplies: bidders is requested to submit/upload the supply order copies for tendered items as documentary evidence towards past supplies from govt. dept/ govt. undertaking, enterprises/ customer.9 / 23 : taxes: payment of tax is primarily the responsibility of the seller and will not be paid unless it is clearly shown on the quotation as payable extra. any change in taxation during the tenure of contract, will be as per applicable statute. under gst regime registration under gst is made mandatory. you shall mention your gst provisional id s in case your supply is from more than one location mention all relevant gst s in the quotation. o ers received from company/ rm/individual without gst provisional id s are liable to be rejected provided they fall within the preview of gst. timely compliance of gst provisions and ling of gst returns is the responsibility of the bidder. any non-compliance may result in withholding of bills partly or fully until it is reflected in form gstr-2a.supplier must furnish/upload the necessary documents for availing of gst input tax credit itc as per gst law.8.1: tds under gst shall be deducted as per the applicable gst provision9: bidder/supplier to ensure that the validity of the statutory certi cate /competency certi cate shall be valid during tender finalization and execution stage.10: treds platform: it may be noted that government of india has implemented trade receivable discounting system treds to address challenges faced by msmes in delayed payments after receipt/acceptance of material/services from government buyers leading to shortfall of working capital. treds is an online electronic institutional mechanism for facilitating the nancing of trade receivables of msmes through multiple nanciers. moil ltd., is already registered on the following treds platform:m/s. a. treds invoicemart, mumbaimsme bidders are required to register on the treds platform. the msme vendors can avail the treds facility, if they want to.all mse vendors/suppliers are advised to get themselves registered on treds platform www.treds.in accordingly.11: bidders who have not performed satisfactorily in the earlier tenders/work orders or have violated the terms of nit, moil ltd. reserves the right to dis-qualify that bidder.12: arbitration clause:- disputes & arbitration for psus only- all the disputes and di erences arising out of or in any way touching or concerning this agreement between the parties shall be resolved by a reference to the permanent machinery of arbitrators pma i.e. to the sole arbitrator in the department of public enterprises as per the o.m.no. 41/2013-dpegm/fts-1835 dated 22/05/2018 issued by the department of public enterprises, ministry of heavyenterprises govt of india and for all purposes of the arbitration the rules and procedure prescribed therein shall beapplicable .13: declaration under companies act: the firm/individual while submitting the tender should submit the under mentioned declaration duly signed. we declare that none of our proprietor / partner / director of the rm/ company has any relationshipwithin the meaning of section 277 read with rule 4 of chapter 1 of the companies act 2013 with any of the employee working in moil ltd or director of moil . if the proprietor / partner / director of the rm/ company has any relationship within the meaning of section 277 read with rule 4 of chapter 1 of the companies act 2013 with any of the employee working in moil ltd or directorof moil shall declare the same in his bid.14: no deviation certi cate: we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us in toto as per bid document on gem . bidder to upload the no deviation certificate . 15: for technical clarifications if any, you may contact: madam krishnachura palchief manager per.10 / 23 landline: 0712-2806116email: krishna.pal@moil.nic.inmobile: 7219552308moil limited, moil bhawan, 1-a, katol road, nagpur-440013, nagpur, maharashtra-440013, india for commercial clarifications if any, you may contact: mr. ajay kolte, dy.g.mmaterialsmoil bhawan, 1a, katol road, nagpur-440 013.contact no. 0712-2806289mobile no. 09960638248/9112675559email: ajaykolte@moil.nic.in 16: revised public procurement preference to make in india: kindly upload the certi cate giving the percentage % of local content and give details of the locations/addresss at which the local value addition is made.as per revised public procurement preference to make in india, order 2017, on 16/09/2020, clause no.3, bidderto mention in which category their rm belong i.e. class-i local supplier/ class-ii local supplier/ non-local supplier. kindly upload the certificate by mentioning the class.in cases of procurement for a value in excess of rs.10 crores, the class-i local supplier / class-ii local supplier shall be required to provide a certificate fromi statutory auditor or cost auditor of the company in the case of companies orii a practicing cost accountant or practicing chartered accountant in respect of suppliers other than companies giving the percentage of local content.17: restrictions on public procurement from certain countries:in this regard bidder may please refer o ce memorandum no. 6/18/2019-ppd dt. 23-07-2020 & subsequent ordersissued by public procurement division, department of expenditure, ministry of finance, government of india towardsrestrictions on public procurement from certain countries.referring to the above, the local suppliers should upload the certificate as under: we have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such a country and is eligible to be considered or however, if any local supplier falls in the category of bidders as indicated in the de nitions clauses at cl no: 6, 7, 8, 9 and 10 of order f.no.6/18/2019-ppd, public procurement no. 1 dt.23-07-2020, should upload the certi cate as under: we have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our rm is from such a country and has been registered with competent authority specified in annexure -i of order f.no.6/18/2019-ppd, public procurement no. 1 dt. 23-07-2020 and further certify that our rm ful ls all requirements in this regard and is eligible to be considered. the evidence of valid registration by the competent authority is uploade11 / 23 d herewith note.1. bidder to choose any one of the above condition which is applicable and upload the same in upload link.2. in case of indian agents of the local suppliers quoting against the tender, both the indian agent and their principals should upload the above mentioned certificates.referring to the above, the local suppliers should submit the certificate as under: we have read the clauses regarding restrictions on procurement from a bidder of a country which shares aland border with india and we hereby certify that our rm is not from such a country and is eligible to be considered .you are requested to submit declaration / certificate as per following format towards compliance of public order on restrictions under rule 144 xi of the general financial rules gfrs, 2017. declaration format: declaration of compliance of order public procurement no.1, 2 & 3 dtd 23 jul 2020 & 24 jul 2020 on restrictions under rule 144 xi of the general financial rules gfrs, 2017 before completing this declaration, bidders must study the general conditions, definitions, govt directives applicable in respect of public procurement no.1, 2 & 3 dtd 23 jul 2020 & 24 jul 2020 on restrictions under rule 144 xi ofthe general financial rules gfrs, 2017& prescribed tender conditions. 12 / 23 the declaration by the authorised signatory of the firm. i, the undersigned, ..................................................................................................................... fullnames, do hereby declare, in my capacity as of m/s....................................................................................................... name of bidder entity, that:1 the facts contained herein are within my own personal knowledge. 2 i have read the order public procurement no.1, 2 & 3 dtd 23 jul 2020 & 24 jul 2020 on the subject ofrestrictions under rule 144 xi of the general financial rules gfrs, 2017 regarding restrictions on procurement from a bidder of a country which shares a land border with india and comply to all the provisions of the order3 i certify that m/s..................................................................................................... name of bidderentity is not from such a country or, is from such a country strike out whichever is not applicable, has been registered with the competent authority. i hereby certify that this supplier ful lls all requirements in this regard and is eligible to be considered. where applicable, evidence of valid registration by thecompetent authority is attached4 i understand that the submission of incorrect data and / or if certificate / declaration given by m/s...............................................................................................................name of bidder entity is found to befalse, this would be a ground for immediate termination and further legal action in accordance with law as per clause 12 of the public order on restrictions under rule 144 xi of the general financial rules gfrs, 2017 authorised signature: date: seal / stamp of bidder: 18: assignment and subletting: the supplier shall not, without the written permission of the purchaser, sublet or assign a portion or portions of the supplies, erection provided that any such consent shall not relieve the supplier from any obligation, duty or responsibility under the contract. provided further, this clause shall not apply to purchase by the supplier of standard products which have been approved by the purchaser. 19: the right to alter our requirements or to reject any or all the tenders without assigning any reasons is reserved with company. 20: format for undertaking to be submitted/uploaded by bidder along with the tender documents refer annexure-a. 13 / 23 annexure-a: format for undertaking to be submitted/uploaded by bidder along with the tender documents14 / 23 i name and designation appointed as the attorney/ authorized signatory of the bidder including its constituents m/s. hereinafter called the bidder the purpose of the tender documents for .as per the tender no of moil, do hereby solemnly affirm and state on the behalf of the bidder including its constituents as under: 1. i/we the bidders am/are signing this document after carefully reading the contents of the above mentioned tender. 2. i/we declare and certify that i/we have not made any misleading or false representation anywhere in the tender submitted including the annexures thereto. 3. i/we also understand that my/ our offer will be evaluated based on the documents/ credentials submitted along with the offer and same shall be binding upon me/us. 4. i/we declare that the information and documents submitted along with the tender documents by me/ us are complete and correct and i/we are fully responsible for the authenticity and correctness or the information and documents, submitted by us. 5. i/we understand that at any time during process for evaluation of tenders, if any information / document submitted by me / us are found to be suppressing facts / forged / false / fabricated / fudged or incorrect, it shall lead to forfeiture of the emd, if submitted and initiating any legal action as deemed fit the moil. further, i/we ........................... name of the bidder and all my/ our constituents understand that my/ our offer shall be summarily rejected. 6. i/we also understand that at any time after award of contract, if the certi cates submitted by me / us are found to be suppressing facts / false/ forged/ fabricated / fudged or incorrect, it may lead to termination of the contract, along with forfeiture of emd / sd and performance guarantee if submitted, besides any other action provided in the contract and initiating any legal action as deemed fit by moil. 7. we declare that none of our proprietor / partner / director of the firm/ company has any relationship within the meaning of section 277 read with rule 4 of chapter 1 of the companies act 2013 with any of the employee working in moil ltd or director of moil . 8. we have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such a country and is eligible to be considered . 9. bidder nancial standing undertaking: we certify that we are not under liquidation, court receivership or similar proceedings, not bankrupt to this effect with bid . 10. we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us in toto as per bid document on gem . seal and signature of the bidderplace:date:15 / 23 21: format for non-collusive tendering certificate to be submitted/uploaded by bidder along with the tender documents format of non-collusive tendering certificateto be signed by an authorised person on the tenderer s behalf to, moil limited, nagpurdear sir/ madam, non-collusive tendering certificate for tender no. date . 1: we, names of the tenderers of address es of the tenderers refer to the bid/ offer against the tender . 2: non-collusionwe represent and warrant that in relation to the tender: a our bid was developed genuinely, independently and made with the intention to accept the contract it awarded;b our bid was not prepared with any agreement, arrangement, communication, understanding, promise of undertaking with any person including any other tenderer or competitor regarding:i prices;ii methods, factors or formulas used to calculate prices;iii an intention or decision to submit a bid;iv an intention or decision to withdraw a bid;v the submission of bid that does not conform with the requirements of the tender;vi the quality, quantity, specifications or delivery particulars of the products or services to whichthis tender relates; andvii the terms of the bid, and we undertake that we will not, prior to the award of the contract, enter into or engage in any of the foregoing. 2: disclosure of in case of job/ project contracts 16 / 23 we understand that we are required to disclose all intended sub-contracting arrangements relating to the tender tothe plants/ mines--------, moil limited, place , including those which are entered into after the contract is awarded. we warrant that we have duly disclosed and will continue to disclose such arrangements to the plants/ mines , moil limited, place --. 3: consequences of breach or non-compliancewe understand that in the event of any breach or non-compliance with any warranties or undertakings in this certificate, the plants/ mines, moil limited, place may, at its discretion, invalidate our bid, exclude us in future tenders, pursue damages or other forms of redress from us including but not limited to damages for delay, costs and expenses of re-tendering and other costs incurred, and /or in the event that we are awarded the contract terminate the contract. signed for and on behalf of the tenderersignature:name:position:date: note: para 2b is not applicable to agreements, arrangements, communications, understandings, promises or undertakings with:a the plants/ mines, moil limited, place;b a joint venture partner, where joint venture agreements, arrangements, relevant to the bid exist and which are notified to the plants/ units-, moil limited, place ;c consultants or sub-contractors, provided that the communications are held in strict confidence and limited to the information required to facilitate that particular consultancy arrangement or sub-contract;d professional advisers, provided that the communications are held in strict confidence and limited to the information required for the adviser to render their professional advice in relation to the tender;e insurers or brokers for the purpose of obtaining an insurance quote, provided that the communications are held in strict confidence and limited to the information required to facilitate thatparticular insurance arrangement; andf banks for the purpose of obtaining financing for the contract, provided that the communications are held in strict confidence and limited to the information required facilitating that financing. 22: detailed technical literature/lea ets/brochure should be submitted along with the tender containing complete specification. drawings wherever necessary be also submitted.17 / 23 23: it is mandatory on part of supplier to submit the performance bank guarantee@5% of total value of order for period of 14 months as mentioned in bid document.advisory bank details:- advisory bank: idbi bank- name of the advisory bank & branch: idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001- advisory bank ifsc code: ibkl0000389- current account no. 041102000018027.- the pbg will be submitted through structured financial management systemsfms platform- performance bank guarantee to be uploaded on gem portal within 15 days of award of contract on gem, as per general terms and conditions gtc on gem, refer clause no. 7, ii . hard copy to be submitted to gm fin., moil ltd., moil bhawan 1a katol road, nagpur-440013. performance bank guarantee is to be furnished by a specified date generally fifteen days after notification ofaward and it should remain valid for a period of sixty days beyond the date of completion of all contractual obligations of the supplier, including warranty obligations. the performance security will be forfeited in the event of a breach of contract by the bidder/contractor. it shall be refunded to the bidder/contractor without interest, after he duly performs and completes the contract in all respects but not later than sixty days of completion of all such obligations including the warranty under the contract.24: in the event of placement order it shall be essential for successful tenderer to submit all relevant document required i.e. test certificate, valid copy of bisif required, guarantee/warranty certificate etc along with the supply.25: technical requirements: the items shall be of the best quality and workmanship and comply with the contract in all respects and shall be to the technical & commercial satisfaction of the purchaser/representative as per ordered terms and condition. the tenderer shall be deemed to have fully examined and to have the knowledge of the general and special technical requirements of the items for which he has submitted his tender. the tenderer, if he so desires, shall seek clari cation from the purchaser/ representative on any aspects of the technical requirements, before submission of the tender, and ignorance of any aspects of the technical requirements, before submission of thetender, shall not absolve the supplier of his responsibility. 26: payment term: 80% payment on receipt & acceptance of materials at site & receipt of pbg as per bid document and balance 20% after satisfactory commissioning and presentation of successful commissioning certi cate, signed by the consignee. 27: manufacturer authorization: wherever selling agent/dealer/distributor authorized by the manufacturer are submitting the bid, tender speci c authorization & undertaking certi cate by manufacturer on letter head of principal/manufacturer as per annexure-i must be submitted. note: i the authorization should be pre- dated from tender opening date, properly signed and valid.the validity should corresponds to the delivery period stipulated in tender enquiry. ii selling agent/dealer/distributor authorized by the manufacturer shall submit manufacturer authorization as per annexure-i, failing which the offer shall be outrightly rejected. 18 / 23 annexure- iauthorization & undertaking certificate by manufactureron letter head of the principal / manufacturerto, moil limitedmoil bhavan, 1-a, katol road, nagpur 440013. sub: gem bid no.: dear sir whereas we, m/s name of manufacturer who are established and reputable manufacturers of tendered/offered items having factories at addresses of factoryies, do hereby authorize m/s name & address our agent to submit a bid and execute the resultant contract with you on our behalf against the above tender. we, m/s name of manufacturer also undertake the following: i that, as a matter of our corporate policy, we do not directly quote/ market our products directly to any organization in india except in situations like supplies to oem /oes/ opm, supplies of spares and consumables bundled with supply of equipment, supplies to customers not covered by dealer network due to geographical/ logistics constraints. ii that we will accept the responsibility for the satisfactory execution of orders placed on our authorized agent including warranty/ guarantee obligations. iii that, wherever necessary, we will provide requisite inspection and testing facilities at our works in respect of orders placed on our authorized agent. iv our authorized agents price will not exceed that which we would have quoted. v we hereby accept to extend our full support and commitment for all the terms and conditions including guarantee and warranty as per the conditions of contract, technical speci cations for the goods and se19 / 23 rvices offered for supply by the above bidder on our behalf against this tender for the entire

Central Government/Public Sector

TRN :35127922 | 30 Aug, 2025

Tender Value : 49.00 Lacs

Mumbai - Maharashtra

Tender for repair/ maintenance to certain b/r marine assets incl replacement of pcc and ms cover, ss railing, chain, at cg dock and k and l berth and associate areas at nd mumbai under age b/r-i under ge nw kunjali

Central Government/Public Sector

TRN :35112229 | 01 Sep, 2025

Tender Value : 7.59 Lacs

Ahmedabad - Gujarat

Tender for gem bids for mild steel sheet q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 / startup exemption for years ofexperience and turnoveryes | complete 5 5 & & /document requiredfrom sellercertificate requested in atc, additional doc 1 requestedin atc, additional doc 2 requested in atc, additional doc3 requested in atc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension2 d /bid number: gem/2025/b/6547840; /dated: 12-08-2025 & & / bid document1 / 14 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation rule50% lowest priced technically qualified bidders 4 4 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation2 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q /estimated bid value759111 q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount22775 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.24a. . % & 4& % & % 4 > \ o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , t < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : 2 / 14 gsrtc collection accountgujarat state road transport corporation, purchase division : 1st floor, central office, nearranip bus terminal, ranip, ahmedabad 382480.cao and fa /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.2. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 3. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 4. purchase preference to micro and small enterprises mses from the state of bid inviting authority : purchasepreference will be given to mses as micro and small enterprises from the state of bid inviting authority. if thebidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product incase of bid for supply of goods. traders are excluded from the purview of public procurement policy for micro andsmall enterprises. in respect of bid for services, the bidder must be the service provider of the offered service.relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offeredproduct or service. if l-1 is not an mse and mse seller s has/have quoted price within l-1+ 20% of margin ofpurchase preference /price band defined in relevant policy, such seller shall be given opportunity to match l-1price and contract will be awarded for percentage of 50 % of total quantity as defined/ decided in relevant policy.5. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any3 / 14 impact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 6. reverse auction would be conducted amongst first 50% of the technically qualified bidders arranged in theorder of prices from lowest to highest. number of sellers eligible for participating in ra would be rounded off tonext higher integer value if number of technically qualified bidders is odd e.g. if 7 bids are technically qualified, then ra will be conducted amongst l-1 to l-4. in case number of technically qualified bidders are 2 or 3, ra willbe between all without any elimination. if buyer has chosen to split the bid amongst n sellers, then minimum nsellers would be taken to ra round. in case primary products of only one oem are left in contention forparticipation in ra based on lowest 50% bidders qualifying for ra, the number of sellers qualifying for ra wouldbe increased to get at least products of one more oem directly participated or through its reseller if available.further, if bids of any sellers eligible for mse preference is / are coming within price band of 15% of non msel-1 or if bid of any sellers eligible for make in india preference is / are coming within price band of 20% of nonmii l-1, then such mse / make in india seller shall also be allowed to participate in the ra process.mild steel sheet 517 pieces 5 5 1 2 & & % % % % < < % % 4 `4 ` b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesspecificationisi markedyes, nodesignation andgrade qualitiesgradecr0, cr1, cr2, cr3, cr4, cr5, isc270c, isc270d, isc270e, isc270f, isc270g, isc340p, isc370p, isc390p, isc440p, isc270b, isc300b, isc320b, isc340b,, , , , , isc440b, isc360b, isc390b, isc280r, isc320r,, isc360r, isc400r, isc340w, isc370w, isc390w, isc440w, isc310la, isc320la, isc350la, isc380la, isc410la, isc440la, isc470la, isc510la, isc550la, isc590la, isc600la, isc700la, isc780t, isc600c,, , , , isc780c, isc980c, isc900m, isc1100m, isc1300m, isc1500m, isc480hf, 260y, 300y, 340y, 380y, 420y, 490y, 550y, hr0, hr1, hr2, hr3, hr4, ish270c, ish270d, ish270e, hs235, hs265,, , , , , , hs295, hs345, ys250, ys300, ys350, ys450, ys550, is 2062 grade a, hrconditionsurface conditionsurface quality a, surface quality b, hot rolled, annealed, normalized, pickled, pickled and oiled, skinpassed, skin passed and oiled, cold rolled, shotblasted, hot rolled and pickled, cold rolled, coldrolled and annealedfinishingsurface finishingskin passed, normal, strain ageing, matt finish, bright finish, dull finishdimensionlengthmm500, 600, 700, 800, 900, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250, 3500, 3750, 4000, 4250, 4500, 4750, 5000, 5250, 5500, 5750, 6000, 6250, 6500, 6750, 7000, 7250, 7500, 7750, 8000, 8250, 8500, 8750, 9000, 9250, 9500, 9750, 10000, 203.2, 300widthmm200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 1250, 101.64 / 14 thickness mm0.08, 0.10, 0.12, 0.14, 0.16, 0.18, 0.20, 0.22, 0.25, 0.28, 0.30, 0.32, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.70, 0.80, 0.90, 1.00, 1.20, 1.25, 1.40, 1.50, 1.60, 1.80, 2.00, 2.50, 2.65, 3.00, 3.15, 3.25, 3.50, 4.00, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 25.0 /speci cation s s /specificationname b b q q /bid requirementallowed valuesadditional specification parameters - mild steel sheet 517 pieces specification parameternamebid requirement allowed valuesgsrtc code no.61192size of the sheet in mm2440x1220x.06mmgsrtc detailed specificationpre-painted g.p. sheet 2440 x 1220 x 0.6 mm/ 8x4x23g confirming tois:no:277 zinc coating should be of 120 gsm. coating standard confirmingto is:14246 top coat of regular modified polyester 25 micron tol.+5inclusive primer back coat 12 micron tol.+2 inclusive paint ral:9002without guard film 1 no peeling and no cracking should be observedduring bending test. 2 colour should be grey.note:material supply as per gsrtc specifications.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; b o ; b /consignees/reporting officer and quantity5. .5. ./s.no. //o ; b o ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1parmar prahladbhaibabubhai382346, gujarat state roadtransport corporationcentral store division, central workshopcompound, krishnnagar, naroda road, ahmedabad.5173655 5 : : e e/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional delivery5 / 14 time shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. forms of emd and pbgbidders can also submit the emd with account payee demand draft in favour ofgsrtc collection accountpayable atahmedabad.bidder has to upload scanned copy / proof of the dd along with bid and has to ensure delivery of hardcopyto the buyer within 5 days of bid end date / bid opening date.3. forms of emd and pbgbidders can also submit the emd with fixed deposit receipt made out or pledged in the name of a/cgsrtc collection account. the bank should certify on it that the deposit can be withdrawn only on the demand or with the sanctionof the pledgee. for release of emd, the fdr will be released in the favour of the bidder by the buyer aftermaking endorsement on the back of the fdr duly signed and stamped along with covering letter. bidderhas to upload scanned copy/ proof of the fdr along with bid and has to ensure delivery of hardcopy to thebuyer within 5 days of bid end date/ bid opening date4. forms of emd and pbgbidders can also submit the emd with banker s cheque in favour ofgsrtc collection accountpayable atahmedabad.bidder has to upload scanned copy / proof of the bc along with bid and has to ensure delivery of hardcopyto the buyer within 5 days of bid end date / bid opening date.5. forms of emd and pbgbidders can also submit the emd with payment online through rtgs / internet banking in beneficiarynamegsrtc collection accountaccount no.30169841063ifsc codesbin0000301bank namestate bank of indiabranch addresslal darwaja, ahmedabad.bidder to indicate bid number and name of bidding entity in the transaction details field at the time of on-line transfer. bidder has to upload scanned copy / proof of the online payment transfer along with bid.6. forms of emd and pbgsuccessful bidder can submit the performance security in the form of account payee demand draft alsobesides pbg which is allowed as per gem gtc. dd should be made in favour ofgsrtc collection accountpayable atahmedabad6 / 14 . after award of contract, successful bidder can upload scanned copy of the dd in place of pbg and has toensure delivery of hard copy to the original dd to the buyer within 15 days of award of contract.7. forms of emd and pbgsuccessful bidder can submit the performance security in the form of fixed deposit receipt also besidespbg which is allowed as per gem gtc. fdr should be made out or pledged in the name ofgsrtc collection accounta/c name of the seller. the bank should certify on it that the deposit can be withdrawn only on thedemand or with the sanction of the pledgee. for release of security deposit, the fdr will be released infavour of bidder by the buyer after making endorsement on the back of the fdr duly signed and stampedalong with covering letter. successful bidder has to upload scanned copy of the fdr document in place ofpbg and has to ensure delivery of hard copy of original fdr to the buyer within 15 days of award ofcontract.8. forms of emd and pbgsuccessful bidder can submit the performance security in the form of payment online through rtgs /internet banking also besides pbg which is allowed as per gem gtc. on-line payment shall be inbeneficiary namegsrtc collection accountaccount no.30169841063ifsc codesbin0000301bank namestate bank of indiabranch addresslal darwaja, ahmedabad. successful bidder to indicate contract number and name of seller entity in the transaction details field atthe time of on-line transfer. bidder has to upload scanned copy / proof of the online payment transfer inplace of pbg within 15 days of award of contract.9. scope of supplyscope of supply bid price to include all cost components : only supply of goods10. purchase preference centrepurchase preference linked with local content pp-lc policy:the bid clause regarding preference to make in india products stands modified in this bid and shall begoverned by the pplc policy no. fp-20013/2/2017-fp-png dated 17.11.2020 issued by mop&ng asamended up to date. accordingly, bidders with local content less than or equal to 20% will be treated as non local supplier . the prescribed lc shall be applicable on the date of bid opening. sanctions on thebidders for false / wrong declaration or not fulfilling the local content requirement shall be as per the pplcpolicy. further following additional provisions are added in the certification and verification of local contentprovision of the preference to make in india clause:i. in case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office orsubsidiary in india giving the percentage of local content is also acceptable. in case office orsubsidiary in india does not exist or indian office/subsidiary is not required to appoint statutoryauditor or cost auditor, certificate from practicing cost accountant or practicing charteredaccountant giving the percentage of local content is also acceptable.ii. along with each invoice: the local content certificate issued by statutory auditor on behalf ofprocuring company shall be submitted along with each invoice raised. however, the % of localcontent may vary with each invoice while maintaining the overall % of local content for the totalwork/purchase of the pro-rata local content requirement. in case, it is not satisfied cumulatively inthe invoices raised up to that stage, the supplier shall indicate how the local content requirementwould be met in the subsequent stages.iii. the bidder shall submit an undertaking from the authorized signatory of bidder having the power ofattorney along with the bid stating the bidder meets the mandatory minimum lc requirement and7 / 14 such undertaking shall become a part of the contract.11. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.12. certificatesthe bidder is required to upload, along with the bid, all relevant certificates such as bis licence, type testcertificate, approval certificates and other certificates as prescribed in the product specification given inthe bid document.13. purchase preference statepurchase preference to micro and small enterprises mses: purchase preference will be given tomses from the state of bid inviting authority having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro andsmall enterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and mediumenterprises and its subsequent orders/notifications issued by concerned ministry / state of bid invitingauthority. if the bidder wants to avail themselves of the purchase preference, the bidder must be themanufacturer / oem of the offered product on gem. traders are excluded from the purview of publicprocurement policy for micro and small enterprises and hence resellers offering products manufactured bysome other oem are not eligible for any purchase preference. in respect of bid for services, the biddermust be the service provider of the offered service. relevant documentary evidence in this regard shallbe uploaded along with the bid in respect of the offered product or service and buyer will decide eligibilityfor purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 is notan mse and mse seller s has / have quoted price within l-1+ 20 % of margin of purchase preference/price band defined in relevant policy, such mse seller shall be given opportunity to match l-1 price andcontract will be awarded for 50 percentage of total quantity. the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrentapplication of public procurement policy for micro and small enterprises order, 2012 and publicprocurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted.14. buyer added bid specific atcbuyer added text based atc clausespre qualification criteria. - documentary evidence required to fulfill criteria.1. the bidder should be dealer/distributor / manufacturer either of class-i gujarat mse/ class-i local supplier / class-ii gujarat mse / class-ii local supplier of tender items. - to verify manufacturer status: commissioner of industries certificate dic/n.s.i.c/cspo/ m.s.m.e./ factory registration certificate. in case of supplier document to be submit their manufacturer. and to verify local content: to provide self-certi cation that the item o ered meets the local content requirement at the time of tender bidding or solicitation. they shall also provide details of the locations at which the local value addition is being done in case of tender value up to rs. 10 crore. to provide a certi cate from the statutory auditor or cost auditor of the company, if entity is registered under company act. while in case of other entity, supplier shall provide certi cate from a practicing cost accountant or practicing chartered accountant certifying the percentage of local content. in case of tendervalue more than rs. 10 crore.2. the minimum average annual financial turnover or actual production of bidder/during the last three years, ending on 31st march of the previous nancial year, should be at least twice the bid value. in case the date of constitution / incorporation of the bidder is less than 3 year old, the average financial turnover or actual production in respect of the completed nancial years after the date of constitution shall be taken into account for this criteria. - documentary evidence in the form of certified audited balance sheets with profit& loss statement of relevant periods or a certi cate from the chartered accountant /cost accountant indicating the financial turnover or actual production details for the relevant period shall be uploaded with the bid. 3. the bidder or its oem themselves or through re-seller should have supplied same or

Central Government/Public Sector

TRN :35119267 | 01 Sep, 2025

Tender Value : 8.44 Lacs

New Delhi - Delhi

Tender for gem bids for white cement, cement ppc, granite stone, oil bounddistemper, wall putty, enamel paint brown, enamel paintwhite, enamel paint green, enamel paint black, enamelpaint grey, turpentine oil, old dhoti, yellow oxide, al.door stopper, marandi wood, anti termite oil, cp head, pvc ball cock, pvc cistern, pvc tank cover lid, pvc tee 3inch, pvc tee 4 inch, gypsum screw 19mm, gypsumscrew 25mm, gypsum screw 38mm, self screw 19mm, self screw 25mm, fiber sheet, al. tower bolt, ms hinges75mm, ms hinges 100mm, urinal partition plate, curtainrod 25 mm, curtain rod bracket, al. handle 4inch, al.handle 6inch, al. tower bolt 6inch, european wc, indianwc, m seal, cp angle valve 15mm, floor tile, brass gatevalve 20mm, brass gate valve 25mm, brass gate valve32mm, brass gate valve 40mm, wall tile, pvc tankcover lid, nails 2.5inch, nails 3inch, nails 3.5inch, nails4inch, pvc gitty, cp health faucet, gi nipple 15x50mm, bricks

Central Government/Public Sector

TRN :35100037 | 22 Aug, 2025

Tender Value : 30.00 Lacs

Cachar - Assam

Tender for gem bids for pvc, pvc door 6 fit x 2 pt 5 fit with choukat for bathroomalongwith all accessories wooden door 6 feet x 3 pt 5 withchoukat teak wood verfified ceramic floor tile 2 feet x 2feet x 10 mm thick make kajaria oblique somany ceramicsoblique stn ceramic bathroom floor tile 1 feet x 1 feet x08 mm thick make kajaria ceramics oblique somanyceramics oblique stn ceramic bathroom wall tile 1 feet x1 feet x 08 mm thick make kajaria ceramics obliquesomany ceramics oblique stn ceramic geyser 25 ltr capmake havells oblique bajaj oblique jaguar connecting pipefor geyser make havells oblique bajaj oblique jaquar wash basin size l14 x w14 x h11 inch make hindwereoblique jaquaroblique hindustan connecting pipe washbasin make hindwere oblique jaquar hindustan washbasin coupling make hindwere jaquar hindustan stainlesssteel inart designer pure brass single lever hot and coldwater basin mixer oblique table mounted tap for washbasin- silver finish make hindwere oblique jaquar obliquehindustan angle cock stainless steel make hindwereoblique jaquar oblique hindustan sink cover stainlesssteel size 5 x 5 inch make hindwere oblique jaquar obliquehindustan nani trap as per isi mark stainless steel wallmixer 3 in 1 for bath make hindwere oblique jaquar obliquehindustan wc european size 47 cm x 37 cm x 40 cm makehindwere oblique jaquar oblique hindustan wc trap asper isi mark waste pipe as per isi mark upvc 1 inch 10 ftlong make supreme oblique prince oblique ashirvad upvc1 oblique 2 inch 10 ft long make supreme oblique princeoblique ashirvad cpvc pipe 1 oblique 2 inch makesupreme oblique prince oblique ashirvad water tank 3layer insulated 1000 ltr cap make sintex oblique bajajoblique himgiri upvc t socket 1 oblique 2 inch makesupreme oblique prince oblique ashirvad upvc elbow 1 bid number gem2025b6555232 dated 11-08-2025 bid document1 81 1 1 oblique 2 inch as per isi mark, cpvc elbow 1 oblique 2 inchas per isi mark, union socket 1 oblique 2 inch as per isimark, gate valve 1 inch as per isi mark, plain socket 1oblique 2 as per isi mark, nipple 1 oblique 2 as per isimark, pvc solution make astral oblique neo seal obliquefinolex, wash basin fixer hindwere oblique jaquar obliquehindustan, geyser fixer as per isi mark, m seal makepidilite oblique hindustan oblique hi tech, 8 inch 200 mmenergy efficient exhaust fan make havells oblique bajajoblique khaitan, fan regulator modular speed controllerfor ceiling fans make havells oblique bajaj oblique orient, switch 5 amp modular make havells oblique bajaj obliqueanchor, switch board 4x4 inch pvc as per isi mark, switchboard 3x3 inch pvc as per isi mark, switch board 6x8 inchpvc as per isi mark, 16 amp switch and socket modularcombined make havells oblique bajaj oblique anchor, mcb16 amp with box modular make havells oblique bajajoblique anchor, electric wire 1 pt 5 mm 90 mtr long makehavells oblique bajaj oblique polycab, electric wire 2 pt 5mm 90 mtr long, make havells oblique bajaj obliquepolycab, casing caping 1 inch make havells oblique greatwhite oblique polycab, tube light 4 fit long make havellsoblique philips oblique crompton, led light 2 ft x 2 ft forceiling make havells oblique philips oblique crompton, 4sqm btc copper wire 90 mtr roll make havells obliquegreat white oblique polycab, pannel box mcb distributionbox 4 way make havells oblique great white obliquepolycab, wall putty make jk oblique birla oblique berger, wall primer 20 ltr pack make asian oblique dulux obliqueberger, white paint 10 ltr pack make asian oblique duluxoblique berger, thinner 05 ltr pack make paxol obliqueasian oblique berger, pre painted cgi sheet 10 ft x 3 ftmake tata oblique bansal oblique everest, false ceilingboard 4 ft x 4 ft make havells oblique great white obliqueanchor, l channel 12 feet long make tata oblique bansaloblique everest, t channel 12 feet long make tata obliquebansal everest, wire nails 2 inch, screw 1 inch, grasscutter powerful 2 hp petrol machine make balwaan obliqueshakti oblique bhavyata, chain saw 16 inch heavy dutypetrol make ibell oblique makita oblique samnantools, fogging machine aluminium body make green max obliquesprayman oblique dvi, fevicol ddl in 01 ltr pack obliquemake fevicol oblique pidilite, fevicol sh in 01 ltr packoblique make fevicol oblique pidilite, hussain cloth heavyduty jute gunny curing cloth roll 36 inch width x 50 yardslong, hand towal cotton multicolour make jockey obliquedollar oblique raymond, looking mirror with frame 24 inchx 48 inch x 6mm make hindware oblique universal obliqueurban ladde, looking mirror with fram bathroom size 2 ft x1 pt 5 ft make hindware universal urban ladde, stainlesssteel hanger 6 pin hook make kkn plus oblique promixooblique cossimo, poultry carrier crate plastic size 90 pt 5cm x 55 pt 5 cm x 28 pt 5 cm make lapo oblique nilkamaloblique supreme, poultry carrier crate plastic size 75 cm x29 pt 5 inch x 55 cm oblique 21 pt 7 inch make lapooblique nilkamal oblique supreme, plastic vegtableoblique fruit carrier crate size 600 x 450 x 400mm makelapo oblique nilkamal oblique supreme, plastic vegtableoblique carrier crate size 600 x 400 x 310mm make lapooblique nilkamal oblique supreme, plastic vegtableoblique carrier crate size 540 x 360 x 290mm make lapooblique nilkamal oblique supreme, plastic vegtableoblique fruit carrier crate size 810 x 570 x 430mm makelapo oblique nilkamal oblique supreme, plastic vegtable //bid details2 / 81 oblique fruit carrier crate 540 x 360 x 350mm make lapooblique nilkamal oblique supreme, plastic vegetableoblique fruit carrier crate 600 x 400 x 425 mm make lapooblique nilkamal oblique supreme, big size steel almirahsize 72 inch x 36 inch x 18 inch comma 18g make godrejoblique tata oblique slimline, almira medium size 34 inchx 18 inch x 60 inch comma 18h make godrej oblique tataoblique slimline, bed side locker stainless steel minimumthick 0 pt 8 mm size 400 mm w x 400 mm d x 820 mm hmake godrej oblique tata oblique slimline, plat formelectronic weighing balance cap 500 kg with warranty 2years make tata oblique kingstar oblique voda, plat formelectronic weighing balance cap 200 kgs make tataoblique kingstar oblique voda, plat form electronicweighing balance cap100 kgs make tata oblique kingstarobliquevoda, plat form electronic weighing balance cap 50kgs with warranty 2 years make tata oblique kingstaroblique voda, connection pipe 2 ft long as per isi mark, connection pipe 1 oblique 2 ft long as per isi mark, desertair coller tank cap 65 ltr plastic body with warranty 3 yearsmake havells oblique bajaj oblique khaitan, ms squarepipe bed with top 19 mm ply wood size 6 feet x 3 feet, mattress 6 ft x 3 ft 5 inch coir make sleepwell obliquekurlon oblique magic, wall clock oblique make titanoblique ajanta oblique tata, deep freezer double door520 ltrs cap make voltas oblique blue satar oblique lg, water cooler cap 150 ltr steel body make voltas obliqueblue satar oblique lg, inverter with battery complete setwith trolley zelio 150ah tubular battery oblique makeluminous oblique v guard oblique amaron, wall fanswing 300mm wall mounted fan high performance 100present copper motor 3 speed control 2 year warrantymake havells oblique bajaj oblique khaitan, gate valve 50mm g i make kirloskar oblique kartar oblique leader, transparent plastic sheet size 2 pt 5 ft x 4 pt 5 ft x 3mmthick make everest polymers r v plast ashmita, steelconcrete chute adjustable as isi mark, rope nylon 1 oblique2 dia good quality, lock with key 40 mm tala makeharrison oblique tata oblique godrej, rope nylon 1 inchdia good quality, curtain rods 1 inch adjustable lengthcurtain rod with um finials and brackes 36 inch to 72 inchas per isi mark, kemflw 20 inch, copper flexible 2 corewire 1 pt 5 mm 90 mtr roll make havells oblique greatwhite oblique polycab, copper wire 4 pt 5 sq mm 90 mtrroll make havells oblique great white oblique polycab, copper wire 1 pt 5 sq mm 90 mtr roll make havells obliquegreat white oblique polycab, copper wire 1 sq mm 90 mtrroll make havells oblique great white oblique polycab, copper wire 2 pt 5 sq mm 90 mtr roll make havells obliquegreat white oblique polycab, black twin core copper 10 sqmm 90 mtr roll make havells oblique great white obliquepolycab, pvc copper wire 0 pt 75 sq mm 90 mtr roll makehavells oblique great white oblique polycab, four coreheavy duty 17 mm wire 90 mtr roll oblique make havellsoblique great white oblique polycab, switch 6 ampmodular make havells oblique great white oblique anchor, switch 15 oblique 16 amp modular make havells obliquegreat white oblique anchor, socket 15 oblique16 ampmodular make havells oblique great white oblique anchor, plug 15 oblique16 amp modular make havells oblique greatwhite oblique anchor, combined switch socket 15oblique16 amp modular make havells oblique great whiteoblique anchor, combined switch socket 5 oblique 6 ampmodular make havells oblique great white oblique anchor, //bid details3 / 81 led light 18 watt make philips oblique havells oblique bajaj, led tube light 22 watt 4 ft make philips oblique havellsoblique bajaj, led tube light 20 watt 2ft make philipsoblique havells oblique bajaj, led bulb 12 watt makephilips oblique havells oblique bajaj, led bulb 09 wattmake philips oblique havells oblique bajaj, bulb zero wattred make philips oblique havells oblique bajaj, bulb zerowatt blue make philips oblique havells oblique bajaj, ledstreet light 60 watt make philips oblique havells obliquebajaj, led security light 60 watt make philips obliquehavells oblique bajaj, exhaust fan make havells obliquebajaj khaitan, fan regulator make havells oblique greatwhite oblique anchor, fan capicitor 2 pt 5 wat makehavells oblique great white oblique anchor, mcb 16 ampmake havells oblique great white oblique anchor, mcb32aamp make havells oblique great white oblique anchor, mcb 63 amp make havells oblique great white obliqueanchor, pendent holder make havells oblique great whiteoblique anchor, angle holder make havells oblique greatwhite oblique anchor, batten holder make havells obliquegreat white oblique anchor, pvc insulation tape 1 inchweight long mtr 10 make stick tapes oblique aipl zorrooblique euro tapes, pvc insulation tape 1 oblique 2 inchweight long mtr 11 make stick tapes oblique aipl zorrooblique euro tapes, pvc board 4 inch x 4 inch make havellsoblique great white oblique anchor, pvc board 6 inch x 8inch make havells oblique great white oblique anchor, change over switch 100 amp make havells oblique greatwhite oblique anchor, bed switch 5 oblique 6 amp makehavells oblique great white oblique anchor

Central Government/Public Sector

TRN :35100948 | 22 Aug, 2025

Tender Value : 0

West Tripura - Tripura

Tender for gem bids for cable jointing kit 11kv 95 sqmm 3 core out door campactswitch disconnector fuse unit of current ratting ac 32 amp2 pole 415 v capacitor 4 mfd change over switch 100amp tpn 415 v with sheet metal encloser decorative typeled fitting 18 watt 6000k drop out copper tinned barrelfuse element of capacity 20 amps 11 kv heating element1500 watt p type led post lantern ideal to lit up parksgarden ways ip 65 20 watt led post top lantern integralpole mounted led post of light with ip-65 protection with 25watt led lamp multi core round pvc insulated pvc cable15 sqmm copper conductor three core piano type switch16 amp piano type switch two way 5 oblique 6 amp 230volt 50 hz pl-l lamp led 18 watt plug top outlet 15 amp3 pin plug top outlet 5 amp s oblique t poly cab flexiblecable 3 core 15 sqmm pressure die cast alluminium roadway lumanaries led light fitting 60 watt pvc adhesive tape20 mm x 10 mtr long pvc adhesive tape 20mm 25 mtrlong pvc board 4 inch x4 inch pvc board 4 inch x7 inch pvc board 8 inch x10 inch x2 inch with isi marked pvccable almn conductor 15 sqmm 1100v s oblique c pvccasing caping 25mmx 2 mtr pvc insulated lamp holderwith back side backelite plate angular type pvc insulatedsingle core sheathed with solid cable 4 sqmm with alumncable conductor pvc insulated twin twisted copperconductor flexible wire with copper conductor of size 23oblique 00076 rccb having ip 20 protection 6 oblique 10ka breafing cap with scpo current rating 63 ampssensitively regulator for celing fan electronic type 100watt sheet metal enclouser with two pin and earth plugwith 20 amp spn mcb socket 5 oblique 6 amp 5 pin socket out let multi purpose socket flush 5 pin 6 oblique 16amp socket outlet flush type 6 amp star - delta starterfor 25 hp motor fully automatic contractor size 32 over load bid number gem2025b6384693 dated 11-08-2025 bid document1 89 1 1 relay, star delta for 15 hp motor make-havells cosmic star-fully automatic star delta starter asd, switch single polepiano type 06 amp, accessories for exhaust fan 300 mmsweep but ventilator lower shouter, adjustable sleaves forrefrigerator 286 ltr, adjustable sleaves for refrigerator 300ltr, compressor for refrigerator 300 ltr, compressor forwater cooler 300 ltr, exhaust fan motor for water cooler 1oblique 5 hp, 25w, fan blade for refrigerator, fan motorfor deep freezer, gas refrigerant r-134 450 gm bottle, gasrefrigerant r-22, heating element 230 v 2 kw triangle type, ice tray plastic, lead connection for geyser 600 mm asper sample, olp 1 oblique 6 hp for refrigerator 300 ltrs, olp for window type ac, over load protector for watercooler, over load relay for refrigerator, pvc air filter for 1.5oblique 2 ton cap split air condition to suitable for coolingcoil unit, relay for deep freezer 230 v 50 hz, relay ptc for1 oblique 3 hp motor, running capacitor 45 mfd for watercooler, running capacitor for ac 50 oblique 60 mfd 230volts 50 hz, thermostate switch for window type ac 1.5oblique 2 ton cap 230 v, 50 hz, cotton waste, lead pig, lead wool, non return valve 100mm dia with gm workingparts, ppr elbow 32mm, ppr elbow 90, of size 32mm., ppr tee 32mm., ppr union 32mm., pvc water tank 500 ltr, rubber tubing for joint leakage, sodium carbonate forwater treatment, anti termite treatment, bib tap brass20mm, butt hinges ms oblique alluminium 100mm, cppush cock 15 mm, curtain rod cp with bracket 25 mmbracket 25 mm 1 pair, fill roofing bitumenious in roll of 1mtr x 20mtr long type-iii grade-i, glass pane clear obliquefrosted 3mm thick, glass pane clear oblique frosted 5mmthick, glass shelf 600 mm length, glass shelf with cpbracket, hydroulic door closer, looking mirror of size600x600mm, looking mirror with pvc frame 24 x 18 inch, m seal, ms oblique steel handle for steel window 100mm, non return valve brass horizontal type size 15 mm, paintenamel white, plywood 12mm thick size 8 feet x 4 feet, plywood 4mm thick size 8 feet x 4 feet, ppr femalethreaded socket of size 25mm - 1 inch dia, ppr gate valve25mm., ppr male threaded socket of size 25mm - 1 inchdia, ppr socket 25mm., ppr union 25mm., prelaminatedparticle board 18 oblique 19mm thick 8 feet x 4 feet, puttyblack, putty white, pvc water tank cover 500 ltr, pvcboard 12 inch x10 inch x2 inch with isi marked, roadmarking paints yellow, self adhesive insulation tape 25mmx25 mtr long, steel wire brush 150 mm long, teflontape 12 mmx 8 mtr long pack of 10 white, thinner, towelrail 900mm long cp, urinal pan flat back 31.5x26.5x44 cmmake hindware, wash hand basin of size 63x45x85cmchina ware white colour, washer for low level flushingcistern of 10 each pkt, wc european s type, wc orissapattorn 580 x 440 mm, white cement, wire mesh stainlesssteel 0.56x1.8x15 mtr lengthcable jointing kit 11kv, 95 sqmm 3 core out door, campact switch fuse unit of current ratting, ac 32 amp, 2pole 415 v, capacitor 4 mfd, change over switch 100 amptpn 415 v with sheet metal encloser, decorative type ledfitting 18 watt 6000k, drop out copper tinned barrel fuseelement of capacity 20 amps 11 kv, heating element 1500watt p type, led post lantern ideal to lit up parks, gardenways . ip 65 20 watt, led post top lantern with ip-65protection with 25 watt led lamp, multi core round pvcinsulated pvc cable 1.5 sqmm copper conductor 3 core, piano type switch 16 amp, piano type switch two way 5/6amp 230 volt 50 hz, pl-l lamp led 18 watt, plug topoutlet 15 amp 3 pin, plug top outlet 5 amp s/t, poly cab //bid details2 / 89

Central Government/Public Sector

TRN :35104509 | 21 Aug, 2025

Tender Value : 0

Narsipatnam - Andhra Pradesh

Tender for gem bids for high performance power supplies q3 * * % % 2 32 3 /mse exemption for years of experienceand turnoveryes | complete& % & % * * % % 2 2 /startup exemption for years ofexperience and turnoverno -- 9 9 : : ; ; < < / minimum number ofbids required to disable automatic bidextension1> ?> ? < <, , a a -- / / number of days for which bidwould be auto--extended7 c %c % >; >; > > /bid to ra enabledno 2 2 /type of bidtwo packet bid d d & f & f /time allowed for technicalclarifications during technical evaluation2 days g g 9 9 i i g g 2 2 / % % l ? l ? m m /inspection required byempanelled inspection authority / agenciespre-registered with gemno < /bid number: gem/2025/b/6549976> /dated: 11-08-2025 & & / bid document1 / 6 d d i i /evaluation methodtotal value wise evaluation u & u & /arbitration clauseno /mediation clauseno //bid details /emd detail 9 /requiredno /epbg detail 9 /requiredno /splitting > / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption. 3. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to match2 / 6 l-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. high performance power supplies 4 pieces f f /technical specifications* f / as per gem category speci cation /speci cation f f /specificationname 9 9 d d /bid requirementallowed valuesgenericpower supply typebenchtop dcnumber of outputs3output voltagedual valueoutput currentdual valuewarranty year>/ 1 yearfunctionalmultiple steps to cover thevoltage and current rangesyesacnumber of output phase forac power supplynacertificationsavailability of type testsreports from centralgovernment lab or ilac ortheir worldwide affiliated/recognised labs or nablapproved lab showingconfirmity to the specificationsyesadditional specification parameters - high performance power supplies 4 pieces specification parameternamebid requirement allowed values1 power supply type 2channels 3 total output power4 channel 1 & 2 output 5channel 3 output1 programmable linear dc power supply 2 3 independent outputs2x30v/3a + 1x5v/3a 3 210 w max or better 4 voltage- 0 to 30 v current-0 to 3 a or better 5 voltage- 0 to 5 v current- 0 to 3 a or better6 load regulation 7 ripple &noise v 8 display type 9display resolution 10protection features6 voltage- < 0.01% + 2 mv current- < 0.01% + 250 a or better 7 ? 350 vrms / ? 2 mvp-p or better 8 4.3 tft lcd or better 9 voltage: 10 mv, current: 1 ma or better 10 ovp, ocp, otp11 series/parallel mode 12connectivity 13 certifications14 warranty11 supported ch1 & ch2 12 usb host, usb device, lan 13 ce, fcc 14 1years* bidders offering must also comply with the additional specification parameters mentioned above. 3 / 6 //c > w c > w /consignees/reporting officer and quantity;. .;. ./s.no. //c > w c > w /consigneereporting/officer /address /quantity> > > > /deliverydays1joseph paularackalan801103, iit patna, kanpa road, bihta420; ; m m z z/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer uploaded atc document click here to view the file.3. oemimported products: in case of imported products, oem or authorized seller of oem should have aregistered office in india to provide after sales service support in india. the certificate to this effect shouldbe submitted.4. genericmanufacturer authorization:wherever authorised distributors/service providers are submitting thebid, authorisation form /certificate with oem/original service provider details such as name, designation, address, e-mail id and phone no. required to be furnished along with the bid5. past project experiencethe bidder / oem themselves or through resellers, should have executed project for supply andinstallation / commissioning of same or

Central Government/Public Sector

TRN :35104811 | 30 Sep, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for supply of m.s. modified terminal box cover with hinges and two fixing holes with captive screws, suitable for use in 4.5 kw alternators of train lighting coaches, conforming to rdso drawing no. rdso/pe/sk/tl/0027-2002 rev. 1..

1
2
3
4

Related Searched Keywords : ms cover

Get ms cover Tender Alert...

Related Searched Keywords : ms cover

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com. Read Policies