Filters

List of ms-cable Tenders

List of latest ms-cable Tenders in Indian Tenders. Click on any ms-cable Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-cable Tenders.

All-Tenders (34)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :36100083 | 15 Dec, 2025

Tender Value : 21.50 Lacs

Dibrugarh - Assam

Tender for construction of 11kv spur line with aaac covered conductor and xlpe cable and augmentation of 2nos of existing 100kva ss to 100kva and 500kva ss in respect of ms marwari arogya bhawan co mr ranjan lohia president arogya bhawan road jyoti n gm/dz/apdcl/uar/2025 26marwari arogya bhawan / 256

Central Government/Public Sector

TRN :36101262 | 20 Dec, 2025

Tender Value : 0

East Sikkim - Sikkim

Tender for gem bids for constructional, cut - off wheel q3, hollow steel sections for structuraluse q4, ms shuttering plate size 1 point 0x1 point 0 mtr, ms shuttering plate size 1 point 0x1 point 2 mtr, msshuttering plate size 1 point 0x0 point 5 mtr, ms shutteringplate size 1 point 0x1 point 5 mtr, ms pipe 40mm dia, mspipe 50mm, ms pipe 75mm, ms pipe 40mm, ms pipe40mm 03 mtr, ms pipe 40mm 02 mtr, ms pipe 40 mm 01mtr, ms nut and bolt, shuttering foam, steel propsscaffolding, adjustable strip head, base plate, right anglecoupler, swivel coupler, angle iron 75x75x6mm, angleiron 65x65x10mm, angle iron 50x50x6mm, angle iron25x25x6mm, ms sheet, ms pipe round, dunnage palate, chinese nails, chinese nails d size, screw black, screw8inch, screw 35 mm, nails 17 nos, self drilling screw, cable clips, gi pipe threading die 2inch complete set, pvcfisher guttka, nails 0 point 5inch, nails 1inch, nails 1point 5inch, nails 2inch, nails 3inch, nails 4inch, nails5inch, nails 6inch, welding rod 2 point 9 x 450mm, welding rod 2 point 5 x 350mm, hacksaw blade 0 point5inch, hacksaw blade 1inch, hacksaw frame

Central Government/Public Sector

TRN :36088755 | 20 Dec, 2025

Tender Value : 0

Mathura - Uttar Pradesh

Tender for gem bids for insulated cutting plier size 210mm 8 inch, screw driversize 904ibt comma 903 and 905, clamp meter with metravipro421 trms ac and dc digital, 818 corded electric testersize 1000v and 200mm, tool bag, hammer with handlesize 800 gm, fiber sheet plastic size 1and half feet, lugs70 amp copper, steel bolt size 3 inch, nut with bolt ironsize 2 and half inch, steel plan washer, soldering paste, bolt with nut iron size 2 inch, water bottle 20 ltr, wirecopper size 16 mm, lugs 35 amp copper, crocodile cliplarge, electrical cable wire thimble size 6mm nos 100piece each packet, drill bit set hand tool kit nos 50 toolseach set, name plate board size 6 inch by 12 inch, flexboard with ms frame size 4 inch by 3 inch, 2 core cablewire round size 16 mm

corporations/Associations/Others

TRN :36091110 | 20 Dec, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for frl unit 3 by 4 inch , frl unit one by 2 inch , cuc covers , solar cleaning , rov actuator servicing , cable route markers , lock and chain , hrc fuse link 20a , mnx12 contactor , 1 sqmm ms wire coil 95m , capacitor 12.5kver , mnx 140 contactor landt , hot air guns , hot air hose , hot air on off valve , hot air heating element , temperature controller , 47kg inner and outer o ring set , hiring of hydra , hiring of hydra extra hrs , solenoid valve , ac servicing , borewell pump servicing , battery 200ah,12v , 4 sqmm green earth wire , hand gloves ht , 1 by 2 inch ss ball valve , solid state kerk cell , load cell , supply and apply of white wash 20kg , insulation mats ht3mm thk , rubber mats 24mm thck , ups battery , 1 imch ss ball valve , 2 inch ms ball valve , 2 inch upvc pipe , 4 inch upvc pipe , spring support for mound , air audit , energy audit , lot valve adapter , lpg filling gun , adjustment bolt for carousel , pu o ring for kosan filling gun , non veg meals , vegmeals , led lights 50w , cotton waste , letter writing painting , sealant for rov , exhaust valve for rov , lock spring for rov , o ring for rov , repair and laying mastic floor , indicator lamps , mnx 140 contactor l and t , dummy plug flp 19mm , hand gloves lt

State Government

TRN :36078502 | 30 Dec, 2025

Tender Value : 0

Mohali - Punjab

Tender for gem bids for supply of stand mounted fabricated prefabricated sub maindistribution board smdb, itc and labelling of floor mountedpre fabricated, supply of surface recess, itc of prefabricated 3 phase 415v 6 way tp surface, supply of prefabricated 240 v rated 6 way, itc of pre fabricated 240 vrate 6 way sp, supply of 4 pole 160a manual changeoverswitch disconnector, itc of 4 pole 160a manualchangeover switch disconnector with terminal shrouds, laying of pvc insulated and pvc sheathed xlpe, laying ofpvc insulated and pvc sheathed xlpe power cable, layingof one number pvc insulated and pvc sheathed xlpe, supply of 4c x 10 sq mm stranded copper conductor, laying of 4c x 10 sq mm stranded copper conductor, supply of indoor end termination, making indoor endtermination, supplying 300 mm width x 50 mm depth x 1 6mm, installing 300 mm width x 50 mm depth x 1 6 mm, supplying 100 mm width x 50 mm depth x 1 6 mm, installing 100 mm width x 50 mm depth x 1 6 mm, supplying 25 mm x 6 mm g i strip, laying 25 mm x 6 mmg i strip, supply of 6 swg dia g i wire, fixing 6 swg dia g iwire, supply of maintenance free earth kit, itc ofmaintenance free earth kit, supply of frls pvc insulatedstranded copper conductor, drawing of frls pvc insulatedstranded copper conductor, supply of 20mm size of isimarked hgms ms black painted conduit, installation of20mm size of isi marked hgms ms black painted conduit, supply of 25mm size of isi marked hgms ms black paintedconduit, installation of 25mm size of isi marked hgms msblack painted conduit, supplying 1 or 2 module75mmx75mm size gi box with modular base, fixing 1 or 2module 75mmx75mm size gi box, supplying 4 module125mmx75mm size gi box, fixing 4 module125mmx75mm size gi box, supplying 6 module /bid number: gem/2025/b/6962998* /dated: 09-12-2025 & & / bid document1 / 49 & & /item category200mmx75mm size gi box, fixing 6 module200mmx75mm size gi box, supplying 8 module125mmx125mm size gi box, fixing 8 module125mmx125mm size gi box, supplying 5 6 amps modularswitch, fixing 5 6 amps modular switch, supplying 3 pin 56 amp modular socket outlet, fixing 3 pin 5 6 amp modularsocket outlet, supplying 15 16 a modular switch, fixing 1516 a modular switch, supplying 6 pin 15 16 a modularsocket, fixing 6 pin 15 16 a modular socket outlet, supplying 3 pin 5 a ceiling rose, fixing 3 pin 5 a ceiling rose, supply of 1 phase 230v 35w or better batten type, installation of 1 phase 230v 35w or better batten, itc ofceiling fan, supply of 300 mm sweep heavy duty sizeexhaust fan, itc of 300 mm sweep, supplying 20 a 240 vspn industrial type socket outlet, fixing 20 a 240 v spnindustrial type socket outlet, supply of 2cx1 5mm2 copperextruded pvc inner sheath armoured, laying of 2cx15mm2 copper extruded pvc inner sheath armoured, supply of addressable photo thermal multi sensor smokedetector ivory, itc of addressable photo thermal multisensor smoke detector ivory, supply of addressable flexmanual call point, itc of addressable flex manual call point, supply of addressable intelligent wall mounted sounderstrobe, itc of addressable intelligent wall mountedsounder strobe, supply of junction box with elmex typeterminal block, installation of junction box at ceiling wallsurface recess, integration of the fire detectors mcpsounders, dismantling of one 01 no existing floor mountedelectrical panels, dismantling of cables of size upto 150 sqmm, dismantling of incoming cables of size 16 35 sq mm, dismantling and removing of existing switchboard industrialsockets, dismantling of existing g i strip upto size of 25mmx 6mm, dismantling of existing conduits sizes 20mm 25mm32 mm, dismantling of existing fire detector mcp sounderfire panel

Central Government/Public Sector

TRN :36073962 | 18 Dec, 2025

Tender Value : 1.50 Lacs

Bhubneshwar - Orissa

Tender for gem bids for multifunction machine mfm v2 q2 * * % % 2 32 3 /mse exemption for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup exemption for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom sellercertificate requested in atc, additional doc 1 requestedin atc, additional doc 2 requested in atc, additional doc3 requested in atc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & c c d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6961379< /dated: 08-12-2025 & & / bid document1 / 15 < :< : d d, , n n -- / / number of days for which bidwould be auto--extended7 8 8 < < < < / /number of auto extension count1 q %q % <6 <6 < < /bid to ra enabledno6 6 s s /itc available tobuyeryes 2 2 /type of bidtwo packet bid t t & v & v /time allowed for technicalclarifications during technical evaluation7 days w w c c x x w w 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno t t /estimated bid value150000 t t x x /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail c /requiredno /epbg detail c /requiredno < / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes2 / 15 \ ^ % 2, < t l1+x% /purchase preference to mse oems available uptoprice within l1+x%15 \ ^ 2 2 / maximumpercentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 6. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation.multifunction machine mfm v2 6 pieces v v /technical specifications3 / 15 v / as per gem category speci cation /speci cation v v /specificationname c c t t /bid requirementallowed valuesgenericdescription of storesmultifunction machine printer with minimum 1 year onsite warranty, including cartridge and powercord/adapterprint technologylasertype of printingmonochrome black, colour or higheroperating systemcompatibilitywindows 10 and above, linux, mac os, windowsserverprintingprint paper sizea4 and legalminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm21 to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to 120, 121 to 140, 141 to160, 161 to 180 or higherminimum print speed perminute as per iso/iec 24734in a4 size-colour in ppmnot applicable, 1 to 5, 6 to 10, 11 to 15, 16 to 20, 21to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to 180 or higherminimum speed per minuteas per iso/iec 24734 in a3size-mono in ppmnot applicable or higherminimum speed per minuteas per iso/iec 24734 in a3size-color in ppmnot applicable or higherauto duplexingprinting/coping 2-sidedfeatureyes or higherscanningmaximum scan areaplaten/flatbed sizea4paper handlingoriginal document feedertype for scanning andcopyingautomatic document feeders adf, reverse/duplexautomatic document feeders radf/dadf, single-pass document feeders spdf or highernumber of main paper tray1connectivityconnectivityusb port, ethernet port, wi-fiadditional specification parameters - multifunction machine mfm v2 6 pieces specification parameternamebid requirement allowed valuesethernet10/100ram128 mb4 / 15 duty cycleminimum 10000 pages per monthwarranty3 years on sitespecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 6 < 6 < q %q % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na //q < c q < c /consignees/reporting officer and quantity6. .6. ./s.no. //q < c q < c /consigneereporting/officer /address /quantity< < < < /deliverydays1arunswamyparshapu751013, central mineplanning and designinstitute limited regionalinstitute vii, plot no e4near gandhi parksamantapuri po rrlbhubaneswar 751013630special terms and conditions-version:4 effective from 31-01-2025 for category multifunctionmachine mfm v21. for buyers1productverificationthe buyer/consignee shall verify the complete product details, includingconfiguration, through the oem website. the buyer/consignee should be able toperform these verifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcentre to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the multifunctionmachine printer at the time of delivery to ensure that the product has not beenin use prior to delivery to the buyer and may be verified using themultifunction printer s built-in print counter or an equivalent tracking system asavailable with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers5 / 15 oem websitelink/part nofor productverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. adevice serial number must also be provided at the time of supply, which must also bementioned on the product supplied. the buyer/consignee must be able to verify thecomplete product details, including configuration, through the provided oem websitelink. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digitalformat from the oem to the purchaser, guaranteeing the products coverageunder the specified warranty terms. the warranty certificate should beverifiable through the oem website/customer care centre.2. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within thewarranty period, whichever is earlier, i.e. once the printer meets either theminimum number of prints within the warranty period or the time durationspecified, the warranty coverage will end.3. the actual number of prints completed by the printer during the warrantyperiod may be verified using the printer s built-in print counter or an equivalenttracking system.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogueparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.6 6 ; ; f f/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder shall submit the following documents along with their bid for vendor code creation: a. copy of pan card. b. copy of gstin. c. copy of cancelled cheque. d. copy of eft mandate duly certified by bank.3. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.4. genericinstallation, commissioning, testing, configuration, training if any - which ever is applicable as per scopeof supply is to be carried out by oem / oem certified resource or oem authorised reseller.6 / 15 . genericmalicious code certificate:the seller should upload following certificate in the bid:-a this is to certify that the hardware and the software being offered, as part of the contract, does notcontain embedded malicious code that would activate procedures to :- i inhibit the desires and designed function of the equipment. ii cause physical damage to the user or equipment during the exploitation. iii tap information resident or transient in the equipment/network.b the firm will be considered to be in breach of the procurement contract, in case physical damage, lossof information or infringements related to copyright and intellectual property right iprs are caused dueto activation of any such malicious code in embedded software.6. genericit equipment shall be ipv6 ready from day one.7. genericthe successful bidder has to supply all essential accessories required for the successful installation andcommissioning of the goods supplied. besides standard accessories as per normal industry practice, following accessories must be part of supply and cost should be included in bid price:vendor has to provide all the necessary items associated with it like cable, toner cartridge etc..8. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods9. inspectionnominated inspection agency: on behalf of the buyer organization, any one of the followinginspection agency would be conducting inspection of stores before acceptance:pre-dispatch inspection at seller premises applicable only if pre-dispatch inspection clause has beenselected in atc:n/apost receipt inspection at consignee site before acceptance of stores:cmpdi ri vii inspection committe10. buyer added bid specific atcbuyer added text based atc clausesannexure-a specification, minimum for mfd technology: lasercolour: mono/ b&wethernet: 10/100, speed: 20ppm or more, 03 years warrantyram 128 mbprint paper size a4 & legal7 / 15 scan size a4adf yesduplex printing yesduty cycle 10, 000 pages per monthoperating system windows 10 & abovewarranty 3 years onsitedelivery period 30 days. vendor has to provide all the necessary items associated with it like cable, toner cartridge etc.additional points:1.vendor must have registered office/firm/company in &/or around local vicinity of bhubaneswar puri, cuttack, khurda etc. all call logins etc with oem / service centres will be done by the vendor/ vendor representative. vendor should have oem authorization / dealership / partnership for selling the product. 2. technical values of the items supplied /offered by the vendors must be covering all the parameters & their respective values as per annexure a irrespective of bid parameters/values.3. installation will be done by vendor / vendor representative/oem.4. date of acceptance of the material will be counted from the date of completion of installation and fulfilment of all the requirement of the supply order.5. warranty should be backed by oem.checklist: these documents are mandatory to submit while bidding.failure to submit the documents as mentioned below while bidding, will lead to the disqualification in the bidding process.1 registered office/firm/company details address, contact number, gst number.2 previous supply order, preferably one year old from the date of the bid publishing, in support of past performance of the offered model. supply order should be of same offered products model/series in the bidding.3 gst, pan, msme certificate, emd, authorisation, dealership as applicable. msme should be proper relevant category.4 minimum certification to be submitted by the bidder on demand by the user- bis/iec/iso, rohs compliance, malicious code certification from the oem. proven-ness criteria.procurement shall be made only for proven product.the equipment o ered by the tenderer shall be considered proven provided the one nos. of quoted model which includes same series model/equivalent series model or similar equipment, as de ned below, or combination thereof, must have been supplied by the bidder ormanufacturer themselves or through their re seller in case bidder is not the manufacturer in india to mining industry and/or to the other industries private or government/ public sector undertaking and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. the performance of only those equipment would be considered for assessing provenness which have been commissioned 1 years prior to the date of opening of tender but not prior to 5 from the date of opening of tender window period.in case the quoted model or similar equipment has not been supplied by the bidder or manufacturer in case bidder is not the manufacturer in india, or if supplied and commissioned in india, but the same has not completed required years of performance for provenness as mentioned above, theo ered equipment will be considered proven if the minimum worldwide population is of one nos. of o ered or similar equipment or combination thereof which have been commissioned 1 years prio8 / 15 r to the date of opening of tender but not prior to ve from the date of opening of tender and all ofthem performed satisfactorily for a minimum period of one year from the date of commissioning. the worldwide population of the bidder will be considered for provenness only when the bidder gives an undertaking that it has not supplied the quoted model or similar equipment in india or if supplied and commissioned in india, the same has not completed required years of performance for provenness as mentioned above at above sub clause. if the bidder claims provenness of the quoted model based on similar equipment, acceptance criteria for similar equipment shall be as per sub clause below.in case the indigenous manufacturer is quoting the same / similar type & model of the equipment as supplied by their foreign collaborator / foreign principal, worldwide, in the past, and the quoted model of indigenous manufacturer has either not been supplied in india or if supplied and commissioned in india, but the same has not completed the required years of performance for provennessas mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of quoted model or similar equipment or combination thereof which have beencommissioned 1 years prior to the date of opening of tender but not prior to 5 years in case of from the date of opening of tender and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide population, foreign collaborator s experience of supplying the offered or similar equipment worldwide shall be considered only if the indigenous manufacturer copy for documents submitted on eprocurement portal / self-certi ed copy for documents submitted in modes other than e-procurement portal of their collaboration agreement with the foreign collaborator which should be valid as on the date of opening of the tender and should also remain valid at least upto supply and commissioning of the last equipment covered in the contract. however, the principal manufacturer will confirm to ensure supply of spares & consumables and service support for smooth running of the equipment throughout its life. further, if any indigenous content is added by the indigenous manufacturer in the quoted model of the equipment, the foreign collaborator will give an undertaking for successful performance of the equipment with the indigenization carried out by the indigenous manufacturer during lifetime of the equipment.in case the indigenous manufacturer is quoting the same / similar type & model of the equipment as supplied by their licensor having valid ipr, for the same type & model of equipment being o ered worldwide in the past and the quoted model of indigenous manufacturer has either not been supplied in india or if supplied and commissioned in india, but the same has not completed therequired years of performance for provenness as mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of quoted model or similar equipment or combination thereof which have been commissioned 1 years prior to the date of opening of tender but not prior to ve years from the date of opening of tender and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide population, the bidder s and licensor s experience of supplying the o ered or similar equipment worldwide shall be considered only if the indigenous manufacturer submits copy for documents submitted on e-procurement portal / self-certi ed copy for documents submitted in modes other than eprocurement portal of their license agreement with the company having valid ipr for the equipment being offered, which should be valid as on the date of opening of the tender and should also remain valid at least upto supply and commissioning of the last equipment covered in the contract. the bidder and licensor for the equipment being o ered will also con rm to ensure supply of spares & consumables and service support for smooth running of the equipment throughout its life. further, if any indigenous content is added by the indigenous manufacturer in the quoted model of the equipment, the foreign collaborator will give an undertaking for successful performance of the equipment with the indigenization carried out by the indigenous manufacturer during lifetime of the equipment.indian manufacturing entity of foreign manufacturer and bidding as indigenous manufacturer: in case the indian manufacturing entity of foreign manufacturer who has su cient facility for manufacturing, supply and after sales service of same or similar equipment as supplied by their foreign principal manufacturer worldwide in the past, and the quoted model of indian manufacturing entityhas either, not been supplied in india or if supplied and commissioned in india, the same has not completed the required years of performance for provenness as mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of o ered model or similar equipment thereof which have been commissioned 1 years prior to the date of opening of tender but not prior to 5 years from the date of opening of tender and all of them have performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide equipment population, the bidder s and principal manufacturer s experience of supplying the quoted or similar equipment worldwide shall be considered only if the indian manufacturing entity submits copy for documents submitted on e-procurement portal / self-certi ed copy for d9 / 15 ocuments submitted in modes other than eprocurement portal of valid legal agreement / collaboration agreement / license agreement / mou with foreign principal manufacturer for the equipment being offered and a declaration from the foreign manufacturer that all related required intellectual property of quoted equipment are accessible by the indian manufacturing entity. further, the foreign manufacturer will give an undertaking for successful performance of the equipment to be manufactured by the indian manufacturing entity during lifetime of the equipment. the bidderand foreign principal manufacturer for the equipment being o ered will also con rm to ensure supply of spares & consumables and service support for smooth running of the equipment throughoutits lifeto encourage the overseas manufacturers to start manufacturing their equipment in india, relaxation in the provenness criteria for same model may be incorporated in nit, subject to the condition that a confirmation by foreign principal manufacturer as well as their indian counterpart shall be submitted that the o ered model is same having identical operation, equal capacity and same driveline/system to their proven foreign model whose documents have been submitted to establish the provenness even if there is a change in the nomenclature. if the bidder claims provenness of the quoted model based on similar equipment, acceptance criteria for similar equipment shall be as per sub clause-below. if the documents are related to the oem or principal, the self certification of oem or principal shall also be required. satisfactory performance means the supplied equipment must have achieved the guaranteed annual availability, if any, as per the performance guarantee clause of the supply orders / contracts for a minimum period of one year from the date of commissioning. in case supply orders / contracts do not have provision for guaranteed annual availability, the bidder will submit satisfactory performance report issued by end users as per benchmark regarding performance of equipment, if any, incorporated in the supply orders / contracts against which these equipment were supplied. in case, the performance reports of the end-users is not available, the bidder shall submit selfcertification claiming satisfactory performance of the equipment supplied. similar equipment shall be such equipment, which fulfills the following: a performs almost identical operations as the quoted model.b should be equal to or higher than the tendered capacity.c uses sub-components, sub-systems and major assemblies of substantially similar design & construction to the model quoted only ratings/ specifications may differ lower or higher. acceptance criteria for similar equipment:in case, the bidder claims provenness of the quoted model based on similar equipment, the similar equipment should have performed satisfactorily for a minimum period of one year from the date of commissioning and the quoted model should have worked for a minimum period of six months from the date of commissioning within the window period of 5 years.in case the bidder claims provenness of the quoted model based on similar equipment and the similar equipment has performed satisfactorily for a minimum period of one year from the date of commissioning, but the quoted model has not worked for a minimum period of six months, the o er may be accepted subject to the conditions mentioned under here under: a. the quoted model should have been designed, manufactured and supplied to the end user but has not been commissioned or if commissioned, has not completed six months of operation after the commissioning. documentary evidence for past supply of the quoted model is to be provided along with the offer.orthe quoted model is an upgraded version of the existing model with improved and the latest driveline/system etc. and has not been manufactured and/or supplied earlier. in such case, the basic model should remain the same. documentary evidence of past supply of the existing model whose upgraded version has been offered, is to be provided along with the offer. b. i the successful bidder will be allowed to supply the quantity or quantity of the rst lot as indicated in schedule of requirement.10 / 15 ii the rm shall be required to furnish additional performance bank guarantee of 100% of the total landed value of equipment along with spares & consumables for warranty period for thequantity. c. on satisfactory performance of all the equipment/ rst lot if applicable for one year from the date of commissioning to be certified by the head of the user dept., clearance shall be obtained from the order issuing authority for supply of the remaining quantity, if any, as per schedule of requirement. d. the additional 100% performance bank guarantee shall be returned only after satisfactory performance of all the equipment/first if applicable lot for one year from the date of commissioning. e. the original 10% pbg for the total contract value will be retained for entire

State Government

TRN :36063980 | 22 Dec, 2025

Tender Value : 0

Nuapada - Orissa

Tender for gem bids for red full circle light, amber full circle light, green arrowfull circle light, green pedestrian walk light, redpedestrian stand, ms clamps for mounting 1 headsignals powder coated, junction box ms with clamppowder coated, count down timer 2 and 1 by 2 digit, traffic signal controller ms, powder coated, mounting arrangment 24v, traffic signal pole size6m height dia 100 mm with necessary holes, base plateand duly painted one coat of red oxide and two coats oftraffic yellow paint., cable, civil work, electricalwork, inverter connection pole installation

Central Government/Public Sector

TRN :36064699 | 15 Dec, 2025

Tender Value : 0

East Khasi Hills - Meghalaya

Tender for gem bids for mcb - miniature circuit - breakers for a.c. operation as peris / iec 60898 part 1 q2, led batton 20w, recessedled 40 oblique 36 w ceiling type provided with drop down600 x 600 mm modular ceiling, led street light 150 wtled ip 66, led street light fitting 60 watt ip 66, mccb 200amp 4 pole 35 oblique 36 ka, led street light fitting 45watt luminaire type ip 66, led lamp 5 wt, calcium hypochloride strenth required 65-70 percent available chlorine, mccb 250amp 36 ka 440 v 4 pole, led street light fitting25 watt luminaire type ip 66, pvc copper cable 4 point 0sqmm single core, sluice valve with flange ends inclstainless steel spindle and wheel 150 mm dia, led bulb 15wt, mccb 400 amp 36 ka 4 pole, pvc insulated single corewire 6 sqmm, mcb tpn 63 amp 440v 50hz, switch socketcombination unit 06 pin 06 oblique 16 amp, switch socketcombination 5 amp with gang box 240v 50hz, sluice valvewith flange ends incl stainless steel spindle and wheel 80mm dia, led bulb 12 wt, pvc insulated multi standardsingle core copper cable 2 point 5 sq mm 1100watt, pvcinsulated multi standard single core copper cable 1point 5sq mm 1100watt, mccb 100 amp 25 ka 4 pole, mccb125amp 25 ka 440v 4 pole, call bell ding dong type 230 v50hz, mccb 100 amp 25 ka 3 pole, led bulb 23 wt, socket multiple 6 pins 16 amp, ssc combination 16 oblique20a with fuse indicator and ganag box 240 v 50 hz, modular socket 15 amp, led batten 10w 2 ft long, ledlamp 7 w, led inverter bulb 12 watt, angle holder 6 amps, service wire 4 sqmm twin core, pvc board 4 inch x 4 inch, pvc board 7 inch x 4 inch, insulation tape 25 mtr long, switch piano type 5 amp, pendent holder 6a, led floodlight 90 oblique 100 watt ip 66, led invertor bulb 9 watt, socket multiple 5 pins 6 amp, service wire 6 sqmm twincore, led bulb 5 watt warm white, pvc insulated andsheated twin core flat aluminium conductor cable 1100 v 10sqmm, pvc board 8 inch x 6 inch, plug top 15 amp, plugtop 6 amp 3 pin, led flood light 30 watt led ip 66, ptswitch 15 amp, pvc copper wire twin core 0 point 5 sqmmpvc multicore, ms plug 25 mm

Central Government/Public Sector

TRN :36068329 | 16 Dec, 2025

Tender Value : 0

Bikaner - Rajasthan

Tender for gem bids for reloc cook house , trailer tyre , leaf of spring , arrangement , u channel , channel , axle , chequered sheet , ply , pivot joint , rhs , shs , angle , fi , cr stainless steel sheet , acp sheet , ms sheet , puf insulation , steel door , loft water tank , detachable ms steps , service counter , stove , wall mounted racks , refrigerator , deep freezer , microwave oven , ceiling light , exhaust fan , switch socket combination , cable , fire extinguisher , battery , 3.5 kva generator set , tools , spare items , change over switch , cable electric , aluminium lugs , distribution board

Central Government/Public Sector

TRN :36068654 | 17 Dec, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for gem bids for hdmi cable one and half mtr , hdmi cable 10 mtr , hdmi cable 5 mtr , power adaptor 9v , printer cable 3 mtr , dvd double layer 8 gb , power adaptor 12v , ups battery , epson ink 0057 , epson ink 008 , epson ink 003 , epson ink 664 , canon g70 pgbk , gt 52 and 53 ink , hp cartridge 277a , hp cartridge 12a , hp cartridge 88a , hp cartridge 87a , brother cartridge , cartridge for mfd , msp 270 cartridge , dvd r tdk , printer switch 4 port , hdmi switch 4 port , cd-r sony , usb extn cable 5m , usb splitter , vga to hdmi splitter , 4 port switch d link , 8 port switch d link

Related Searched Keywords : ms cable

List of ms-cable Tenders

Get ms cable Tender Alert...

Related Searched Keywords : ms cable

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us