Filters

List of mini-bus Tenders

List of latest mini-bus Tenders in Indian Tenders. Click on any mini-bus Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for mini-bus Tenders.

All-Tenders (1051)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35195033 | 08 Sep, 2025

Tender Value : 0

Morbi - Gujarat

Tender for request for proposal rfp for selection of bus operator for bus procurement, operation and maintenance of 30-nos. midi diesel/cng buses on net cost contract basis for morbi muncipal corporation under â€œswarnim jayanti mukhya mantri shaheri vikas yojana for the scheme chief minister urban bus service cmubs in the municipa corporation of gujarat

Central Government/Public Sector

TRN :35190610 | 01 Sep, 2025

Tender Value : 1.25 Lacs

Jodhpur - Rajasthan

Tender for gem bids for provision, days ministrystate nameministry of defence department namedepartment of military affairs organisation nameindian army office name total quantity180 air cleaner filter of dozer d 80 size ii model no 2010, fuelfilter of dozer d 80 size ii model no 2010, oil filter ofdozer d 80 size ii model no 2010, cylander seal kit ofdozer d 80 size ii model no 2010, bottom straner ofdozer d 80 size ii model no 2010, fuel shut off valve ofdozer d 80 size ii model no 2010, hoze of dozer d 80size ii model no 2010, cable tarcho meter of dozer d 80size ii model no 2010, smart alram of dozer d 80 size iimodel no 2010, o ring of dozer d 80 size ii model no2010, screw of dozer d 80 size ii model no 2010, masterpin of dozer d 80 size ii model no 2010, guard board ofdozer d 80 size ii model no 2010, washer of dozer d 80size ii model no 2010, pin piot of jcb 3dx super model no2019, bolt m10 x70 of jcb 3dx super model no 2019, nutlock 3 bue 8 inches of jcb 3dx super model no 2019, bushjcb of 3dx super model no 2019, grease nipple of jcb 3dxsuper model no 2019, piot pin 306mm of jcb 3dx supermodel no 2019, spacer locking of jcb 3dx super model no2019, nut lock m10 of jcb 3dx super model no 2019, fuelfilter of jcb 3dx super model no 2019, breather of jcb 3dxsuper model no 2019, element filter, light of jcb 3dxsuper model no 2019, hing of jcb 3dx super model no2019, catch window of jcb 3dx super model no 2019, lock assembly right side of jcb 3dx super model no 2019, reflector reflex of jcb 3dx super model no 2019, screw ofjcb 3dx super model no 2019, piot pin of jcb 3dx supermodel no 2019, whiper assembly of jcb 3dx super modelno 2019, hoze cb of 3dx super model no 2019, seal kit of3dx super model no 2019, fuel filter of 3dx super modelno 2019, element filter of 3dx super model no 2019, airelement of 3dx super model no 2019, rock breaker switchof 3dx super model no 2019

Central Government/Public Sector

TRN :35172585 | 08 Sep, 2025

Tender Value : 0

Rajouri - Jammu And Kashmir

Tender for gem bids for medicines, tab meftal spas, tab lanzol junier, tab emset, tabbuscogest, tab drotiflag mf, tab lopaleen, tab dulcoflex, tab bifilac, tab itradila 200mg, tab fluka 150 mg, tabacivir 400 mg, tab levocet m, tab dafo 6 mg, cap genvolplus, tab vertin 16 mg, tab preganor m, tab tryptometer10 mg, tab chymolet plus, tab urimax 0 point 4 mg, tabursoflag 300, tab minipress xl 5mg, tab livogen, sypmeftal spas, syp davercof ls junior, syp oflox 100 mg, syp amoxyclav 457mg, eye drop ciplox, ear dropclearvax, otrivin adult drop, oint pilogo plus, ointthrombophobe, oin orosore gel, lot caladryl 125 ml, injatropine, inj ryloc, inj buscogast, inj dexona, injneurobion, inj deriphyllin, inj starmol 2ml, tab digene, liq digene, inj dopamine, inj calcium gluconate, injpantop, inj eptoin, inj sylate, inj drotin, tab sorbitrate5mg, inj adreline, cap unizyme, clocip dusting powder, oint fourderm 10gm, e oblique d ciplox d, ear dropcandibiotic plus, tab amlosafe 3d, ors liquid

corporations/Associations/Others

TRN :35177742 | 27 Aug, 2025

Tender Value : 0

Tonk - Rajasthan

Tender for auction sale of mini bus swaraj mazda

Central Government/Public Sector

TRN :35179216 | 29 Aug, 2025

Tender Value : 22.97 Lacs

Jharsuguda - Orissa

Tender for gem bids for mineline, bid number gem2025b6583715 dated 19-08-2025 0 0 bid document1 45 0 0 2 2 isolator assembly k3 on off, shunt trip assemblycomplete, no volt coil assy under voltage coil as, shunt trip coil, current transformer for ammeter, ammeter 100 5 for acb, limit switch 2no plus 2ncfor breaker, overload assembly breaker 110a 200a, ammeter 200 5 for acb, busbar, push buttonactuator for el test, push button actuator for elreset, air circuit breaker with wiring and assy, power cable for 200a for breaker chamber, powercable for 200a for isolator chamber, ct for ol, dashpot oil per litre, brass terminal withinsulator dmc, brass terminal with dmc insulator, brass terminal for cp, brass terminal for og, moving contact assembly for isolator, fixedcontact assmbly for isolator300a, moving contactassembly for breaker 300a, fixed contact assemblyfor breaker 300a, ct with ammeter 0 400a ctr 3005a type, ammeter 300 5 for acb, air circuit breakerwith wiring assy, on off isolator 300a, earthleakage relay 50 750ma with time l, on delay timer, control relay 110v, aux contactor with coil, actuator no, miniature circuit breaker, restrained type plug and socket complete, on offrev isolator, indicating lamp with pcb mounting, ct for over load, single phasing preventor withmodule, copper terminal bushing cp og, terminalbushing assly with brass termin, rectifier, brasscone and gland assembly, glass fuse with holder, core balance transformer, potential transformer80 va, brass stud with dmc bushing for og, auxiliary contactor220v ac, potentialtransformer, hrc power fuse, currenttransformer for o l 15va, thermal overload relay, under voltage relay 110v, isolator on off rev100a, h t h r c p t fuse, fuse holder plus glassfuse, toggle switch, off delay timer, single poletwo way toggle switch, annunciating led panel, 22 point 5 dia led indicator yellow, 30 point 5 mm diapush button red, 30 point 5 mm dia push buttonyellow

State Government

TRN :35152279 | 25 Aug, 2025

Tender Value : 38.99 Lacs

Birsinghpur - Madhya Pradesh

Tender for hiring of one no mini bus 20 seater running in good condition for operation emergency duty of unit no 5 ph iii at sgtps, for period of 02 years

Central Government/Public Sector

TRN :35154419 | 01 Sep, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for toilet, bid number gem2025b6446814 dated 18-08-2025 bid document1 44 1 1 modular piano type domestic electrical switches as per is3854 q3, toilet seat - indian style squatting pan q3, mcb - miniature circuit - breakers for a.c. operation as peris / iec 60898 part 1 q2, door handles as per is 208q4, toilet seat covers v2 q4, ceiling rose - is 371q3, piano type modular domestic electrical sockets - is1293 q3, piano type modular domestic fan regulator asper is 11037 q3, flushing cistern q3, gang box suitablefor 05 oblique 06 amp switch and socket, union gi 20 mm, direct on line starter in steel sheet enclosure type commamotor rating ac 3 duty comma 415 v comma 3 ph commasingle phase starter suitable for 3 hp comma mf 1monoblock pump, on load changeover switch 4 pole withsteel enclosure 160 amp, plug gi 15 mm, tee reducing 20by 15 mm, socket gi reducing 25 by 20 mm, modular typeblanking plate 1m, modular type frame plates withmatching cover plates 6m, modular type metal flush boxes3m, modular type switch board boxes one module 2 m box, plug top 5 amps 230 volts white polycarbonate body 3 pintype, 9v duracell lithium battery, 1 point 5v duracell aabattery, brass butt hinges 125mm long, night latchcomplete with triplicate key 7 lever, kick plate of 200 to300 mm wide and 80 to 100 cm long using transparentacrylic sheet 3 mm thick, 150 mm size ss door stopper, non skid ceramic tile any size, switch socket combinationwhite polycarbonate body 6a 230 v 3 pin combined, modular type frame plates with matching cover plates 8m, pvc insulated flexible copper wire 4 sqmm 3 core, pvcinsulated flexible copper wire 2 point 5 sqmm 3 core, sensor for urinal, senser based hand dryer stainless steelfinish, ss finish paper towel dispenser of capacity 400 to600 c oblique z towels, 15 mm bore sensotronic sensorfaucet for wash basin with 175 mm extension body, pvcbox suitable for fixing of modular switches sockets of 3modules complete, distribution board double door typemade out of sheet metal enclosure crca sheet mcb tpn 12way with 200 amps copper busbar 415 volts built mccb 125amps comma 10 ka, wall mounting bracket decorativeluminaire powder coated housing comma ss finish fixturewith opal glass diffuser suitable for gls b 22 lamp inclconnection make havells or equivalent, 6 lever mortise lockwith ss plate, hasps and staple 125 mm, bracket for 25mm drapery oblique curtain rod, flushing handle pvc for llcistern, gi pipe med grade 20 mm, istribution boarddouble door type made out of sheet metal enclosure crcasheet and mcb tpn 8 way with 200 amps 415 volts with inbuilt mccb 125 amps 10 ka, cast iron body sluice valvestainless steel stem non raising wedged gates with ironwheel head pn 1 point 6 as per is14846 including flangedjoints of the 250 mm dia pn

Central Government/Public Sector

TRN :35128937 | 03 Sep, 2025

Tender Value : 0

Almora - Uttaranchal

Tender for gem bids for spare, bid number gem2025b6567016 dated 13-08-2025 0 0 bid document1 82 0 0 2 2 sushpension bush kit, brake shoe with rivit, wheelcyclinder assy, u j cross inner lock, hub oil sealrear inn out, hub oil seal front, oil filter, hubwheel brg rear inner, hub wheel brg rear out, hub wheel brg front inner, combination switch, tie rod end, drag link rod end, uj cross out lock, hub wheel chack nut lock, hand brake cable, steering u j cross, power steering oil pipe, boostpressure sensor, clutch pressure plate set, rooflight led, gear lever dust boot, fan belt, brakeshoe set, sleeve cyl air, feed pump, fuel stanner, uj cross, centre bolt, door lock sml lh rh, flywheel ring gear, side morror, door lock lh innercatch, clutch pressure plate rel brg, drag linkkit, tail ligh assy, king pin set 4x2, air pressurepipe line compressor to ddo, front right sidebrake actuator, tata back led light bsvi, wheelcyclinder, disc pad, complete sushpension bush kit, hvac filter, fuel filter scorpio, wiper blade, u jcross, rear brake shoe set, ball joint set, clutchpressure plate release brg set, stub liser end, fuel filter, door glass machine lh rh, prop shaftnut bolt with lock, fuel filter element, wipermotor, wiper blade big, self bendex, brakepressure switch bs6, air filter, rear brakeactuator, fan belt tata, hydrolic pump assy, pannal board cover, acc cable, chain withspocket set, back light glass, fuel pump, fuelinjector, fuel strainer, carburator house pipe, emery paper p180, pop rivit, welding holder heavy, welding wire heavy, wind shield for arc welding, filter openner adjustment type, rexine black, cutting blade hand cutter4, nut bolt mix 10 12 17no, blub 67 no, blub 2441, meter blub, fuse minimix, araladite, lt wire 4mm 1 5mm, welding rod 10swg, welding rod 12 swg, dosing unit filter assybsvi, clutch sleev cyl, clutch master, door lockassy lh rh, indicator assy front lh rh, airpressour pump electrical //bid details2 / 82

Central Government/Public Sector

TRN :35112229 | 01 Sep, 2025

Tender Value : 7.59 Lacs

Ahmedabad - Gujarat

Tender for gem bids for mild steel sheet q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 / startup exemption for years ofexperience and turnoveryes | complete 5 5 & & /document requiredfrom sellercertificate requested in atc, additional doc 1 requestedin atc, additional doc 2 requested in atc, additional doc3 requested in atc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension2 d /bid number: gem/2025/b/6547840; /dated: 12-08-2025 & & / bid document1 / 14 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation rule50% lowest priced technically qualified bidders 4 4 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation2 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q /estimated bid value759111 q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount22775 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.24a. . % & 4& % & % 4 > \ o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , t < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : 2 / 14 gsrtc collection accountgujarat state road transport corporation, purchase division : 1st floor, central office, nearranip bus terminal, ranip, ahmedabad 382480.cao and fa /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.2. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 3. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 4. purchase preference to micro and small enterprises mses from the state of bid inviting authority : purchasepreference will be given to mses as micro and small enterprises from the state of bid inviting authority. if thebidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product incase of bid for supply of goods. traders are excluded from the purview of public procurement policy for micro andsmall enterprises. in respect of bid for services, the bidder must be the service provider of the offered service.relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offeredproduct or service. if l-1 is not an mse and mse seller s has/have quoted price within l-1+ 20% of margin ofpurchase preference /price band defined in relevant policy, such seller shall be given opportunity to match l-1price and contract will be awarded for percentage of 50 % of total quantity as defined/ decided in relevant policy.5. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any3 / 14 impact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 6. reverse auction would be conducted amongst first 50% of the technically qualified bidders arranged in theorder of prices from lowest to highest. number of sellers eligible for participating in ra would be rounded off tonext higher integer value if number of technically qualified bidders is odd e.g. if 7 bids are technically qualified, then ra will be conducted amongst l-1 to l-4. in case number of technically qualified bidders are 2 or 3, ra willbe between all without any elimination. if buyer has chosen to split the bid amongst n sellers, then minimum nsellers would be taken to ra round. in case primary products of only one oem are left in contention forparticipation in ra based on lowest 50% bidders qualifying for ra, the number of sellers qualifying for ra wouldbe increased to get at least products of one more oem directly participated or through its reseller if available.further, if bids of any sellers eligible for mse preference is / are coming within price band of 15% of non msel-1 or if bid of any sellers eligible for make in india preference is / are coming within price band of 20% of nonmii l-1, then such mse / make in india seller shall also be allowed to participate in the ra process.mild steel sheet 517 pieces 5 5 1 2 & & % % % % < < % % 4 `4 ` b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesspecificationisi markedyes, nodesignation andgrade qualitiesgradecr0, cr1, cr2, cr3, cr4, cr5, isc270c, isc270d, isc270e, isc270f, isc270g, isc340p, isc370p, isc390p, isc440p, isc270b, isc300b, isc320b, isc340b,, , , , , isc440b, isc360b, isc390b, isc280r, isc320r,, isc360r, isc400r, isc340w, isc370w, isc390w, isc440w, isc310la, isc320la, isc350la, isc380la, isc410la, isc440la, isc470la, isc510la, isc550la, isc590la, isc600la, isc700la, isc780t, isc600c,, , , , isc780c, isc980c, isc900m, isc1100m, isc1300m, isc1500m, isc480hf, 260y, 300y, 340y, 380y, 420y, 490y, 550y, hr0, hr1, hr2, hr3, hr4, ish270c, ish270d, ish270e, hs235, hs265,, , , , , , hs295, hs345, ys250, ys300, ys350, ys450, ys550, is 2062 grade a, hrconditionsurface conditionsurface quality a, surface quality b, hot rolled, annealed, normalized, pickled, pickled and oiled, skinpassed, skin passed and oiled, cold rolled, shotblasted, hot rolled and pickled, cold rolled, coldrolled and annealedfinishingsurface finishingskin passed, normal, strain ageing, matt finish, bright finish, dull finishdimensionlengthmm500, 600, 700, 800, 900, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250, 3500, 3750, 4000, 4250, 4500, 4750, 5000, 5250, 5500, 5750, 6000, 6250, 6500, 6750, 7000, 7250, 7500, 7750, 8000, 8250, 8500, 8750, 9000, 9250, 9500, 9750, 10000, 203.2, 300widthmm200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 1250, 101.64 / 14 thickness mm0.08, 0.10, 0.12, 0.14, 0.16, 0.18, 0.20, 0.22, 0.25, 0.28, 0.30, 0.32, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.70, 0.80, 0.90, 1.00, 1.20, 1.25, 1.40, 1.50, 1.60, 1.80, 2.00, 2.50, 2.65, 3.00, 3.15, 3.25, 3.50, 4.00, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 25.0 /speci cation s s /specificationname b b q q /bid requirementallowed valuesadditional specification parameters - mild steel sheet 517 pieces specification parameternamebid requirement allowed valuesgsrtc code no.61192size of the sheet in mm2440x1220x.06mmgsrtc detailed specificationpre-painted g.p. sheet 2440 x 1220 x 0.6 mm/ 8x4x23g confirming tois:no:277 zinc coating should be of 120 gsm. coating standard confirmingto is:14246 top coat of regular modified polyester 25 micron tol.+5inclusive primer back coat 12 micron tol.+2 inclusive paint ral:9002without guard film 1 no peeling and no cracking should be observedduring bending test. 2 colour should be grey.note:material supply as per gsrtc specifications.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; b o ; b /consignees/reporting officer and quantity5. .5. ./s.no. //o ; b o ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1parmar prahladbhaibabubhai382346, gujarat state roadtransport corporationcentral store division, central workshopcompound, krishnnagar, naroda road, ahmedabad.5173655 5 : : e e/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional delivery5 / 14 time shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. forms of emd and pbgbidders can also submit the emd with account payee demand draft in favour ofgsrtc collection accountpayable atahmedabad.bidder has to upload scanned copy / proof of the dd along with bid and has to ensure delivery of hardcopyto the buyer within 5 days of bid end date / bid opening date.3. forms of emd and pbgbidders can also submit the emd with fixed deposit receipt made out or pledged in the name of a/cgsrtc collection account. the bank should certify on it that the deposit can be withdrawn only on the demand or with the sanctionof the pledgee. for release of emd, the fdr will be released in the favour of the bidder by the buyer aftermaking endorsement on the back of the fdr duly signed and stamped along with covering letter. bidderhas to upload scanned copy/ proof of the fdr along with bid and has to ensure delivery of hardcopy to thebuyer within 5 days of bid end date/ bid opening date4. forms of emd and pbgbidders can also submit the emd with banker s cheque in favour ofgsrtc collection accountpayable atahmedabad.bidder has to upload scanned copy / proof of the bc along with bid and has to ensure delivery of hardcopyto the buyer within 5 days of bid end date / bid opening date.5. forms of emd and pbgbidders can also submit the emd with payment online through rtgs / internet banking in beneficiarynamegsrtc collection accountaccount no.30169841063ifsc codesbin0000301bank namestate bank of indiabranch addresslal darwaja, ahmedabad.bidder to indicate bid number and name of bidding entity in the transaction details field at the time of on-line transfer. bidder has to upload scanned copy / proof of the online payment transfer along with bid.6. forms of emd and pbgsuccessful bidder can submit the performance security in the form of account payee demand draft alsobesides pbg which is allowed as per gem gtc. dd should be made in favour ofgsrtc collection accountpayable atahmedabad6 / 14 . after award of contract, successful bidder can upload scanned copy of the dd in place of pbg and has toensure delivery of hard copy to the original dd to the buyer within 15 days of award of contract.7. forms of emd and pbgsuccessful bidder can submit the performance security in the form of fixed deposit receipt also besidespbg which is allowed as per gem gtc. fdr should be made out or pledged in the name ofgsrtc collection accounta/c name of the seller. the bank should certify on it that the deposit can be withdrawn only on thedemand or with the sanction of the pledgee. for release of security deposit, the fdr will be released infavour of bidder by the buyer after making endorsement on the back of the fdr duly signed and stampedalong with covering letter. successful bidder has to upload scanned copy of the fdr document in place ofpbg and has to ensure delivery of hard copy of original fdr to the buyer within 15 days of award ofcontract.8. forms of emd and pbgsuccessful bidder can submit the performance security in the form of payment online through rtgs /internet banking also besides pbg which is allowed as per gem gtc. on-line payment shall be inbeneficiary namegsrtc collection accountaccount no.30169841063ifsc codesbin0000301bank namestate bank of indiabranch addresslal darwaja, ahmedabad. successful bidder to indicate contract number and name of seller entity in the transaction details field atthe time of on-line transfer. bidder has to upload scanned copy / proof of the online payment transfer inplace of pbg within 15 days of award of contract.9. scope of supplyscope of supply bid price to include all cost components : only supply of goods10. purchase preference centrepurchase preference linked with local content pp-lc policy:the bid clause regarding preference to make in india products stands modified in this bid and shall begoverned by the pplc policy no. fp-20013/2/2017-fp-png dated 17.11.2020 issued by mop&ng asamended up to date. accordingly, bidders with local content less than or equal to 20% will be treated as non local supplier . the prescribed lc shall be applicable on the date of bid opening. sanctions on thebidders for false / wrong declaration or not fulfilling the local content requirement shall be as per the pplcpolicy. further following additional provisions are added in the certification and verification of local contentprovision of the preference to make in india clause:i. in case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office orsubsidiary in india giving the percentage of local content is also acceptable. in case office orsubsidiary in india does not exist or indian office/subsidiary is not required to appoint statutoryauditor or cost auditor, certificate from practicing cost accountant or practicing charteredaccountant giving the percentage of local content is also acceptable.ii. along with each invoice: the local content certificate issued by statutory auditor on behalf ofprocuring company shall be submitted along with each invoice raised. however, the % of localcontent may vary with each invoice while maintaining the overall % of local content for the totalwork/purchase of the pro-rata local content requirement. in case, it is not satisfied cumulatively inthe invoices raised up to that stage, the supplier shall indicate how the local content requirementwould be met in the subsequent stages.iii. the bidder shall submit an undertaking from the authorized signatory of bidder having the power ofattorney along with the bid stating the bidder meets the mandatory minimum lc requirement and7 / 14 such undertaking shall become a part of the contract.11. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.12. certificatesthe bidder is required to upload, along with the bid, all relevant certificates such as bis licence, type testcertificate, approval certificates and other certificates as prescribed in the product specification given inthe bid document.13. purchase preference statepurchase preference to micro and small enterprises mses: purchase preference will be given tomses from the state of bid inviting authority having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro andsmall enterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and mediumenterprises and its subsequent orders/notifications issued by concerned ministry / state of bid invitingauthority. if the bidder wants to avail themselves of the purchase preference, the bidder must be themanufacturer / oem of the offered product on gem. traders are excluded from the purview of publicprocurement policy for micro and small enterprises and hence resellers offering products manufactured bysome other oem are not eligible for any purchase preference. in respect of bid for services, the biddermust be the service provider of the offered service. relevant documentary evidence in this regard shallbe uploaded along with the bid in respect of the offered product or service and buyer will decide eligibilityfor purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 is notan mse and mse seller s has / have quoted price within l-1+ 20 % of margin of purchase preference/price band defined in relevant policy, such mse seller shall be given opportunity to match l-1 price andcontract will be awarded for 50 percentage of total quantity. the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrentapplication of public procurement policy for micro and small enterprises order, 2012 and publicprocurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted.14. buyer added bid specific atcbuyer added text based atc clausespre qualification criteria. - documentary evidence required to fulfill criteria.1. the bidder should be dealer/distributor / manufacturer either of class-i gujarat mse/ class-i local supplier / class-ii gujarat mse / class-ii local supplier of tender items. - to verify manufacturer status: commissioner of industries certificate dic/n.s.i.c/cspo/ m.s.m.e./ factory registration certificate. in case of supplier document to be submit their manufacturer. and to verify local content: to provide self-certi cation that the item o ered meets the local content requirement at the time of tender bidding or solicitation. they shall also provide details of the locations at which the local value addition is being done in case of tender value up to rs. 10 crore. to provide a certi cate from the statutory auditor or cost auditor of the company, if entity is registered under company act. while in case of other entity, supplier shall provide certi cate from a practicing cost accountant or practicing chartered accountant certifying the percentage of local content. in case of tendervalue more than rs. 10 crore.2. the minimum average annual financial turnover or actual production of bidder/during the last three years, ending on 31st march of the previous nancial year, should be at least twice the bid value. in case the date of constitution / incorporation of the bidder is less than 3 year old, the average financial turnover or actual production in respect of the completed nancial years after the date of constitution shall be taken into account for this criteria. - documentary evidence in the form of certified audited balance sheets with profit& loss statement of relevant periods or a certi cate from the chartered accountant /cost accountant indicating the financial turnover or actual production details for the relevant period shall be uploaded with the bid. 3. the bidder or its oem themselves or through re-seller should have supplied same or

Private Sector

TRN :35106854 | 01 Sep, 2025

Tender Value : 0

Kullu - Himachal Pradesh

Tender for gem bids for days ministrystate nameministry of power department namecontracts and materials organisation namena office namep and c rampur hps sjvn ltd total quantity120 upper bush housing, distance ring lower, lower bushhousing, distance ring upper

Related Searched Keywords : mini bus

List of mini-bus Tenders

Tender for auction sale of mini bus swaraj mazda

Tender for hiring of one no mini bus 20 seater running in good condition for operation emergency duty of unit no 5 ph iii at sgtps, for period of 02 years

Tender for gem bids for days ministrystate nameministry of power department namecontracts and materials organisation namena office namep and c rampur hps sjvn ltd total quantity120 upper bush housing, distance ring lower, lower bushhousing, distance ring upper

Get mini bus Tender Alert...

Related Searched Keywords : mini bus

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us