Filters

List of metal-bin Tenders

List of latest metal-bin Tenders in Indian Tenders. Click on any metal-bin Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for metal-bin Tenders.

All-Tenders (27)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35394593 | 25 Sep, 2025

Tender Value : 0

Amreli - Gujarat

Tender for gem bids for brush sweeping hand soft broom, cloth stocknite muttoncloth, broom country, super mop refils, cleaner whitetoilet, polish metal brass, duster cloth a, cloth sponge14x16, feather broom phool jhadu, pest seal, disinfectantfluid white black phenoil, cotton rags coloured, cottonwaste, red oxide iron geru, cleaning bar for utensil 500gms, room freshner, white cleaner colin, blue laundryisi mark, plastic mug, soap liquid toilet, spray handliquid insecticide, rat sticking gel, distilled water, napthalene balls, gash bag 24x30x75 micron, dust binwith covercombined, detergent powder in 01 kg pack isimark

State Government

TRN :35396507 | 25 Sep, 2025

Tender Value : 34.27 Lacs

Raigad - Maharashtra

Tender for borewell drilling 150 mm dia by dth machine including transporting of machine at worksite, providing & placing 180 mm dia 6 kg p.v c.casing pipe (l5:4985-1988) & fixing borecap after complation of borewell, yield testing of borewell by 90 degree v notch method for minimum 2 hrs .continously, providing cap for 180 mm dia p.v.c.casing pipe, casing pipe lowering & grouting, solar system, supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintained for 5 years. 3 bhp solar pump construction of bandhara, clearing cutting thorny shurbes, bushes , mooleyhills etc. complete, excavation in hard murum/hard man kankar/pebbles, exceeding 1.5m in width including depositing the material as directed with all lead upto 15m and lift into 1.5m including boulders of size less than 0.10cum including dressing etc complete. excavation in soft rock exceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10cum, dressing etc complete. excavation in hard rock exceeding 1.5m in width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of size exceeding 0.10cum including dressing etc complete providing and laying rubble soling below foundation in layers including fillinf with rubble chips murum etc. complete (excluding royalty material) providing and laying in situ cement concrete of grade m-150 of trap / granite / gneiss /quartzite graded metal for pcc with or without surface reinforcement rcc/concreting requiring heavy or spetial type of shuttering for works of gallery ,sluice,spillway crest,spillway down stream face,energy dissipating structure,inteke structure,training walls,piers abutments etc.with concrete mixture considering lead of 50 m with shuttering and scaffolding ,placing ,compacting,curing etc.complete with an initial lead of 50 m and lift of 1.50 m. providing & laying in position tor steel reinforcement including cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m providing casing embankment using selected previous material available directly from excavation in layers including cost of all other operations such as collection of material spreading material in layer of specified thickness sorting out breaking clods levelling sectioning edges sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1km for watering and 6m lift. providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. providing and fixing 90 cm x 60 cm marble plate engraving 10 cm.height letter ,figures including painting the lefters/ figures withapproved colour and shade complete " "rcc well providing and laying in situ cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete." providing & costing in constructing in situ. c.c of trap granite/ quartzite / gneiss/ metal of approved quality of r.c.c. work as per detailed drawing & design or as directed by engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with c.m. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( by weight batching & mix design for m-250 & m-300 only use of l&t, acc ambuja, birla gold, manikgad, rajashree etc. cement is permitted excluding m.s or tor reinforcement in r.c.c. m-250grade. 1) r.c.c. m-250for beam " 2) r.c.c. m-250 for vertical wall providing & fixing in position steel bar reinforcement of various diameters for r.c.c. pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). tor steel" providing & laying weep holes of 80 mm ac/pvc pipe as per drawing for abutment returns, return walls etc. complete. dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by engineer-in-charge (including cost of machinery labour fuel )etc complete. providing rubble stone paving 15cm thick in 1:3 cement mor tar over bedding of 15cm thick cement concrete of 1:4:8 propor t ion wi th t rap / grani te / quar tzi te / gneiss metal including st r iking joints and water ing etc. complete." providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete." reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. providing and fixing in position c.i. dapuri steps or 22 mm dia. m.s. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer- in-charge." providing and fixing 90 cm x 60 cm marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. lift 0.00 m to 1.50 m" "switch room excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a- 1/259)" excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-2/259) providing and laying in situ cement concrete in m – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. "providing second class burnt brick masonry with convent ional/ i.s.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. complete " providing and casiting in situ cc of trap /granite/quartzite/gneiss metal of approved quality for r cc work as per detailed drawing and designs or as diredcted by engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withcm 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. slabs b) in rcc m-200" providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. item no 8 :- filling the plinth & floors murum bedding in trenches with approved murum from excavatyed materials form foundation 15 cm. to 20 cm. layers including watering and compaction complete. providing and laying cement concrete flooring 40 mm thick wi th m15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. with natural sand providing and fixing frame wi th / wi thout ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete item no. 11 :- providing and fixing count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete item no. 12 :- providing and fixing count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete item no.13 :- providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. item no.14 :- providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. item no. 15 :- providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete item no. 16 :- providing and fixing in position steel bar reinforcement of various diamenters for rcc piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) "pumping machinery item no. 1 :- providing, erecting and giving test of submersible pump set conforming to is 8034 and motor conforming to is 9283, with water proof winding. pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415 v ± 10%, 3 ph, 50 hz a.c. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge out let as per manufacturer's design. antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages" "item no. 2 :- supplying and erecting, flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed. 3 core 10sqmm" "item no. 3 :- supplying and erecting fully automatic star delta starter to operate squirrel cage induction motor working on 380- 440 volt, 3 phase, 50 hz with no volt coil, over load element, and on off push buttons, with necessary material and connected to supply, etc complete. starter with original sheet steel encloser. > 7.5 hp & up to 12.5 hp" item no.4 :- providing , installing & commissioning main control pannel board including v.meter & a. meter of suitable range single phase prevention 8 nos. of phase indicater lamps with colour glass of 230 v rotary switch over load capacitor suitable for 7.50hp and 12.50bhp pump etc.complete. (market rate) "item no.5 :- providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. pressure gauge shall be installed as directed, with tapping on rising main. pressure gauge (100 mm dia)" item no.6 :- providing tools for pumping. item no. 7 :- main wiring work from m. s. e. b. cut out to the panel board 4 core x 459 mm 1100 grade with i. s. i. mark standard / aluminum armored cable (94.1 p.36) item no. 8 :- providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep "solar pump item no.1 :-supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintaince for 5 years " "rising main item no. 1:- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm item no.3 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no. 4 :- providing, erecting, connecting double flanged short body pattern tye manually operated butterfly valve having body, disc and end cover in graded cast iron to is 210 gr. cf 200 generally conforming in bs 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding c.c. foundation/ structural steel support confirming to is 3095-1991. sluice valves 80 mm dia for washout" "item no. 5 :- providing and supplying air valves as per is-10845 and mjp’s standard specifications of approved mark and quality of following diameters including all taxes (central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete. air valves 15 mm dia" "item no.6 :- excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (earth soil)" "item no. 7 :- excavation for foundation/pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (hard murrum)" "item no.8 :- excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. soft rock" "item no.9 :- excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. lift 0 to 1.5 m hard rock" item no. 10 :- filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. "item no. 11 :- lowering, laying and jointing h. d. p. e./ m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm "item no. 12 :- lowering laying and jointing in position following c.i.d/f reflux valves butterfly valves and sluice valves including cost of all labour joining material, including not bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of sluice valves) sluice valves 80 mm dia for washout" "item no. 13 :- lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. air valves 15 mm dia" "item no. 14 :- providing and fixing in position air valve shaft including providing and fixing gi medium class or 6 mm thick m.s. pipe shaft 2.70 m long over branch flange of air valve tee, providing pcc block of m-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in pcc m-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on murum & harder strata" item no 15 :- providing and laying in situ following grades of c.c. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. "item no. 15 :- providing and constructing b.b. masonry valve chamber with 15 cm thick 1:3:6 proportion pcc bedding, including excavation, b.b. masonry in c.m. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing c.i. manhole frame and cover in rcc 1:2:4 coping or cm thick slab etc. complete as directed by engineer-in-charge. size 0.90 x 0.60 x 1.20" item no. 16 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 17 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia hdpe pipe 8 kg/sqcm" "distribution system item no .1 :- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 2 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no.3 :- providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete sluice valves 50 mm dia" "item no 4 :- excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-1/259) earth soils" "item no. 5 :- excavation for foundation / pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bda-3/259) hmb" "item no. 6 :- excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking as directed by engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-4/259) soft rock" "item no. 7 :- excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (bd-a-6/259) hard rock" item no. 8 :- filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd-a-10/263) "item no. 9 :- lowering, laying and jointing h. d. p. e./m.d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 63 mm dia hdpe pipe 6 kg/sqcm" "item no. 10 :- lowering, laying and jointing in position following c.i.d/f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valves.) sluice valves 50 mm dia" "item no. 11 :- providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m-300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) a) 1:2:4 (m-150) grade " "item no. 12 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg) " item no. 13 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 14 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 15 :- providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x35 x3 mm frame with properly cross braced m.s.angles of size 35 mm x 35 mm x 3 mm duly painted including two m.s.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.spec. number as directed by engineer in charge morth 801 item no. 16 :- providing and making upvc/mdpe pipe consumer service connection on distribution main by drilling hole with suitable means , including all labour , upvc/mdpe pipe of required length with or without road crossing as described below, including cost of specials like saddle/clamp saddle of suitable material, and diameter suitable for distribution main, 15mm /20mm/ 25mm respective dia heavy duty brass/polyprophylyne(twin jacketed ) ferrule , male and female thread adapter elbow, bends,couplers ,tees, clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, gi casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by engineer in "trial run item no. 1 commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by mjp / local body and handing over the scheme to local body after completion of the above period as directed by engineer-in-charge.note: required chemicals to be supplied by department free of cost and electricity bill will also be paid by the department.for singlvillage" piped water supply scheme at - adnale tal- tala

Central Government/Public Sector

TRN :35397221 | 03 Oct, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for gem bids for procurement, paper a4 size make jk easy copier spectra green, paperlegal size make jk easy copier spectra green, dustingcloth, 4 color paper flag with 40 sheets make aerotix neonsticky, steel paper cutter make kangaro taparia deli, cutter blade make deli natraj wizards taparia, laminatedfile cover white printed as per sample given by consignee, file cover printed as per sample given by consignee, cellopen bluepacket of 10 nos make cello gripper cello pin pointcello technotip, cello pen black packet of 10 nos makecello gripper cello pin point cello technotip, cello pen redpacket of 10 nos make cello gripper cello pin point cellotechnotip, register 100 pages for office purpose, register200 pages for office purpose, register 500 pages for officepurpose, transparent tape 2 inch, transparent tape 1 inch, transperent tape 1 point two inch, transparent tape 3inchs, red tape1 point two inchs, red tape 1 point twoinchs, green tape 1 point two inchs, green tape 1 inchs, blue tape 1 point two inchs, blue tape 1 inchs, yellow tape1 point two inchs, orange tape 1 point two inchs, blacktape 1 point two inchs, black tape 1 point inchs, browntape 3 inchs, browntape 2 inchs, file tag large, erasernon dust, sharpnermake natraj apsara, do envelope whitecolor 12cm into15 cm, envelope fs cloth type 27 cm into12 cm, yellow envelope a4 size, envelope white 9 into 4, envelope yellow large f5, paper weight, white envelope 27into 13 centimeter, oddy multipurpose scissors 8 point 5inch, drawing sheet yellow make kaleela lakeer kartmennavneet youva pg creations, talc sheet big roll meter, permanent marker black make luxor camlin reynolds, white board marker of colour black make cello whitematefaber castell camlin, white board marker of colour bluemake cello whitemate faber castell camlin, white boardmarker of colour red make cello whitemate faber castell /bid number: gem/2025/b/6673633* /dated: 13-09-2025 & & / bid document1 / 57 camlin, white board marker of colour green make cellowhitemate faber castell camlin, highlighter pack of 05multicolor make cello luxor camlin, uniball pen eye fineub157 blue, blue pen v5 make hi-tecpoint, blue pen v7make hi tecpoint, red pen v7 make hi tecpoint, blue inkfor pad 28 ml make camlin acgl, blue ink stamp pad makefaber castell, fevistik glue stik 15 grams, paper gum 700ml make camlin, paper clip 32mm packet of 12 pcs makebambalio ela dahsha, paper clip 25mm packet of 12 pcsmake bambalio ela dahsha, pape clip 19 mm packet of 12pcs make bambalio ela dahsha, pape clip 12 mm packetof 12 pcs make bambalio ela dahsha, pape clip 51 mmpacket of 12 pcs make bambalio ela dahsha, pape clip 41mm packet of 12 pcs make bambalio ela dahsha, metalpaper clips 25 into 35mm steel u clip plastic packet of 100pcs make kkesetko, stainless steel paper pin t type25mm in plastic box of 250 pcs make kesetko, staplersmall no 10 make kangaro, stapler small pin no 10 makekangaro, stapler pin large make kangaro, stapler pin 23into 10 make kangaro, stapler large of make kangaro hp45 desk, correction pen whitner make reynolds fabercastell luxor, apsara drawing pencils, 2b pack of 10, restick pad 2 into 2, re stick pad 3 inchs into 3 inchs makepost it, re stick pad 3 iinchs into 5 inch make post it, calculator large m19710 make casio orpat, stainlessscale 30 cm make kangaro kabeer, fevicol mr 250 ml, classmate colour crew sketch pens 12 shades, omegaexecutive clip board, sukeshcraft army dak file folderrfid protected black colour, vms photography paperglossy 150 gsm 50 pages, jk bond paper a4 size 500 sheet, marker pen black, brush 0 into 5 inchs 1 inchs 2 inchs 3inchs 4 inchs, poker for paper hole, apsara glass markingpencils white 10 pencils, sprial binding machine

Central Government/Public Sector

TRN :35397323 | 29 Sep, 2025

Tender Value : 39.55 Lacs

Agra - Uttar Pradesh

Tender for gem bids for renewal, steel shelving cabinets adjustable type confirming to is3312 v4 q3, cafeteria chair q2, metal beds v3 q2, table centre fd 274, chair writing tp, table 1520mm x860mm x 760mm table dining tp, bin soil multipurpose fde6 map 09, table dressing ladies fd map ii 07, tablewriting fd 275, sofa set 05 seater fd 281

corporations/Associations/Others

TRN :35381928 | 15 Oct, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for procurement of 1100-liter capacity metallic waste bin for collection of solid waste for swm department under 15th finance commission for swm under bidhannagar municipal corporation. niq no.967/pwdbmc dt.16/09/2025 sl-1

Central Government/Public Sector

TRN :35387160 | 23 Sep, 2025

Tender Value : 0

Jaisalmer - Rajasthan

Tender for gem bids for proc, plain copier paper v3 isi marked to is 14490 q4, rollerball pen v3 q4, ball point pens v2 as per is 3705q4, binder clips v2 q3, self adhesive flags v2 q4, clips, paper as per is 5650 q4, tags for files v2 as peris 8499 q4, packaging tape q4, glue stick v2 q4, staplers v2 q3, desktop calculator - electronics q4, eraser q4, markers for white board v2 q4, permanentmarker pen q4, stamp pads q4, highlighter pen q4, portable sealed rechargeable single cells - nickel - metalhydride rechargeable batteries as per is 16048, 16046q3, knife blades q4, stamp - pad ink as per is 393 q4, compact disk cases - cd - dvd case q4, ink refills v2q4, moisteners v2 q3, paper or eyelet punches q4, register v2 q4, desk pads - writing v2 q4, filecover printed, white file cover printed, white file cover, dak folder, appreciation certificate, register for postalstamps, binder clip 15 mm, colorful sticky notes, pencil, cello white tape transparent, transprant tape, correctiontape, sharpener, colour pencil, glue, fevicol, pokhar, envelopes brown, envelope, envelope yellow, plasticscale, steel scale, paper wight, cloth for packing of dak, bag for dak, binding rop, dvd

Central Government/Public Sector

TRN :35379125 | 03 Oct, 2025

Tender Value : 0

Hyderabad - Andhra Pradesh

Tender for gem bids for white board markb2 b46er pens 4 colors, stickynote pad size 3 x 3 100 nos pack, dvd rw 4.7gb, tricolour sticky note pad 100 nos pack, masking tape2 inch 2 mtrs length, xerox paper a4 size 80 gsmream, binder clips 50mm 12 nos box, 60mtransparent tape cell tape 2 inch, neelgaganspring files no 1000, sharpener 20 nos box, classmate ruled notes pads, solo desk organiser, zip lock cover pack of 100 a4 size, 200 pagesregister books with cloth, apsara pencil 10 nosbox, white tape 2.5 inch width 60 meter length, ziplock cover 3 inch x 2 inch 100 nos pack, plasticscale 30cm, brown tape big size 2 inch roll, scissor 9.5 inch 242 mm zaino zd37, white fluidcorrection pen 7 ml, binder clip 32 mm 5 nos pack, register delux 150 pages ruled, zip lock cover 4inch x 6 inch 100 nos pack, stapler pin no 10, singlepunch shp 10 kangaro, battery cells 1.5v dura cellaa, box folder solo la511, ball pen, apsaraeraser, pvc spiral binding coil springs assortedsize white colour, colin 500 ml glass or windowcleaner container with inbuilt spray, punchdouble dp 480, calico file lcover flat files withdrdo logo printing, l shape folder solo, fabercastell highlighter marking pen, file folderprinted with drdl logo, cutting blade with handlesteel, stapler pin 24 by 6, cd 700 mb, strip file solo, permanent marker multi colour, cd marker, double punch dp 800, white colour pencil, electrical tape 1 by 2 inch black, teflon tape, bagfor carrying files, file rack, colour tape binding, spiral sheet, chargable tourch light standardmake, tea flask standard make, metallic scale 1mtr, kettle 1 liter standard make

Central Government/Public Sector

TRN :35379366 | 22 Sep, 2025

Tender Value : 4.31 Lacs

Chennai - Tamil Nadu

Tender for gem bids for metal storage bins (q3)

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Related Searched Keywords : metal bin

List of metal-bin Tenders

Tender for procurement of 1100-liter capacity metallic waste bin for collection of solid waste for swm department under 15th finance commission for swm under bidhannagar municipal corporation. niq no.967/pwdbmc dt.16/09/2025 sl-1

Tender for gem bids for metal storage bins (q3)

Get metal bin Tender Alert...

Related Searched Keywords : metal bin

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us