Filters

List of m-s-scrap Tenders

List of latest m-s-scrap Tenders in Indian Tenders. Click on any m-s-scrap Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for m-s-scrap Tenders.

All-Tenders (43)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for mspan>ajor repair work under state budget head at govt. sss bilona kalan -demspan>olishing stone rubble mspan>asonry mspan>anually/ by mspan>echanical mspan>eans including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge: in cemspan>ent mspan>ortar. dismspan>antling stone slab roofing over wooden karries and battens (dismspan>antling karries and battens to be paid for separately) including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>eter lead: demspan>olishing cemspan>ent concrete mspan>anually/ by mspan>echanical mspan>eans including disposal of mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mspan>ix. dismspan>antling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumspan>ping ground within 50 mspan>eter lead. providing and laying in position cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. mspan>10 grade nomspan>inal mspan>ix 1: 3: 6 (1 cemspan>ent : 3 coarse sand : 6 graded stone aggregate 20mspan>mspan> nomspan>inal size). randomspan> rubble stone mspan>asonry for with hard stone in foundation and plinth in cemspan>ent sand mspan>ortar above 30 cmspan> thick wall in:cemspan>ent mspan>ortar 1:6 ( 1-cemspan>ent : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and remspan>oval of formspan>work for upto floor five level for : columspan>ns, pillars, posts and struts etc. providing and laying in position specified grade of cemspan>ent concrete for rcc structural elemspan>ents upto floor five level including curing, comspan>paction, finishing with rendering in cemspan>ent sand mspan>ortar 1:3 (1 cemspan>ent: 3 coarse sand) and mspan>aking good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcemspan>ent for beamspan>s, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.mspan>20 grade nomspan>inal mspan>ix / design mspan>ix providing and fabricating reinforcemspan>ent for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all comspan>plete up to floor five level. thermspan>o-mspan>echanically treated bars (conformspan>ing of relevent is code) kota stone slab flooring 25 mspan>mspan> thick over 20 mspan>mspan> (average) thick base laid over and jointed with grey cemspan>ent slurry mspan>ixed with pigmspan>ent to mspan>atch the shade of the slab including rubbing and polishing comspan>plete with base of cemspan>ent mspan>ortar 1 : 4 (1 cemspan>ent : 4 coarse sand) for area of each slab fromspan> 2001 to 5000 sq.cmspan> : kota stone slabs 25 mspan>mspan> thick in risers of steps, skirting, dado and pillars laid on 12 mspan>mspan> (average) thick cemspan>ent mspan>ortar 1:3 (1 cemspan>ent 3 coarse sand) and jointed with grey cemspan>ent slurry mspan>ixed with pigmspan>ent to mspan>atch the shade of the slabs, including rubbing and polishing comspan>plete for area of each slab upto 2001 sqcmspan> grading roof for water proofing treatmspan>ent with water proffing comspan>pound cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 graded stone aggregate 20 mspan>mspan> nomspan>inal size) gola providing gola 75x75 mspan>mspan> in cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 stone aggregate 10mspan>mspan> and down gauge) including finishing with cemspan>ent mspan>ortar 1:3 (1 cemspan>ent : 3 fine sand) as per standard design : plaster (ceiling): 6 mspan>mspan> thick cemspan>ent plaster to ceiling of mspan>ix 1:3 (1cemspan>ent : 3-fine sand) internal plaster : plaster on new surface on walls in cemspan>ent sand mspan>ortar 1:6 including racking of joint etc. comspan>plete fine finish :12mspan>mspan> thick. plaster on new surface on walls in cemspan>ent sand mspan>ortar 1:6 including racking of joint etc. comspan>plete fine finish :20mspan>mspan> thick. providing and applying white cemspan>ent based putty over plastered surface to prepare the surface even and smspan>ooth comspan>plete finishing walls with acrylic smspan>ooth exterior paint of required shade including all scaffolding. new work (two or mspan>ore coat applied @ 1.67 ltr/10 sqmspan> over and including base coat of water proofing cemspan>ent paint applied @ 2.20 kg/ 10 sqmspan> ). distemspan>pering with oil bound washable distemspan>per of approved brand and mspan>anufacture to give an even shade including all scaffolding:new work (two or mspan>ore coats) over and including scrapping and primspan>ing coat with cemspan>ent primspan>er. panting on doors & windows :- painting with synthetic enamspan>el paint of approved brand and mspan>anufacture to give an even shade : two or mspan>ore coats on new work "copping : providing and laying cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in retaining walls, return walls, walls (any thickness) including attached pilasters, columspan>ns, piers, abutmspan>ents, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. mspan>20 grade nomspan>inal mspan>ix 1: 1.5: 3 (1 cemspan>ent : 1.5 coarse sand : 3 graded stone aggregate 20 mspan>mspan> nomspan>inal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized mspan>odular box with earth termspan>inal, 6 a mspan>odular switch, mspan>odular face plate with grid plate, 3 pin ceiling rose / lamspan>p holder/ 3 pin connector , screws etc, mspan>aking connections,all as per pre approved by engineer in charge, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mspan>tr.) mspan>ediumspan> point (up to 6 mspan>tr) long point (up to 10 mspan>tr) wiring of 3/5 pin 6 amspan>p. light plug point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth termspan>inal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mspan>mspan> thick isi mspan>arked phenolic lamspan>inated sheet (is : 2036 - 1995), al. alloy/ cadmspan>iumspan> plated iron screws 20 mspan>mspan> cup washers etc. all as per pre approved by engineer in charge, mspan>aking connections, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and mspan>aking good the samspan>e as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submspan>itted before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . mspan>mspan>s (9537 p-111)pvc condute.25mspan>mspan>. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmspan>mspan> supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmspan>mspan> providing & fixing of 240/415 v ac mspan>cb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requiremspan>ent) 4kv imspan>pulse withstand voltage, as per pwd specification for electrical works with isi mspan>arked is 8828(1996) / conformspan>ing to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mspan>echanisumspan> , energy limspan>iting of class 3 as per iec, mspan>inimspan>umspan> phase termspan>ination capacity of 35sq.mspan>mspan>. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, mspan>in. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including mspan>aking connections, testing etc. as required. . oemspan> shall have submspan>it nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smspan>d mspan>id power led batten type integrated light fixture mspan>ade fromspan> polycarbonate /extruded alumspan>iniumspan> powder coated housing with in built driver , power consumspan>ption of 18w/20w ,systemspan> lumspan>en efficacy = 120 lmspan>/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life timspan>e of mspan>inimspan>umspan> 50000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. 1170mspan>mspan>(+/-10%) led batten with mspan>in. lumspan>en output 2200 lmspan> providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with systemspan> lumspan>en efficacy =100 lmspan>/watt output ,pf 0.95 , cri >70, mspan>inimspan>umspan> life timspan>e of mspan>inimspan>umspan> 25000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for led fixtures. (lmspan>79/lmspan>80) certificate / report fromspan> oemspan> shall be submspan>itted. all as per pre approved by engineer in charge . for additional technical paramspan>eters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmspan>oured alumspan>iniumspan> cable confirmspan>ing to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic alumspan>iniumspan> conductor confirmspan>ing to is 8130 of purity >99.6 %, inner / outer sheath confirmspan>ing to is:5831 in existing rcc / humspan>e / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oemspan> mspan>ust have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mspan>mspan> 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, alumspan>iniumspan> body & mspan>etallic blade ceiling fan conformspan>ing to all the performspan>ance requiremspan>ents laid down in is 374:2019 including all amspan>endmspan>ents, as applicable ; & carry bis licensing (i.e. isi mspan>arking) with down rod up to 80 cmspan> with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mspan>mspan> pvc insulated flexible copper conductor mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi mspan>arked (is:1258) batten/angle lamspan>p holder with cmspan>/l no. printed and mspan>ade out fromspan> industrial grade polycarbonate or fire resistant abs mspan>aterial, brass termspan>inal & captive screwsincluding mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mspan>mspan> thick mspan>.s. recessed fan box, hexagonal/ round of size 130 mspan>mspan> dia, depth 75mspan>mspan>, 12 mspan>mspan> dia rod fan hook with 100 mspan>mspan> length extended on each side . all as per pre approved by engineer in charge. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi mspan>arked is:13947-iii/conformspan>ing to iec 60947-3, suitable for ac22a utilization catagory, 4kv imspan>pulse withstand voltage, true contact indication, red colour dolly / lever shall have single mspan>ould covering over all poles for operation , two position din rail mspan>ounting, mspan>inimspan>umspan> phase termspan>ination capacity of 35sq.mspan>mspan>. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including mspan>aking connections, testing etc. as required. oemspan> shall have submspan>it nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 30/40 amspan>p rating . providing & fixing of mspan>odular type 120 w step fan regulator duly isi mspan>arked (is 11037:1984 ) with cmspan>/l no. printed mspan>ade out of unbreakable and fire retardant vergin poly carbonate with brass termspan>inals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,mspan>aking connections, testing etc. as required. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 mspan>odule 360 dgree rotating p & f isi mspan>arked (is:3854) 6 amspan>p. flush type non mspan>odular switch with cmspan>/l no. printed and mspan>ade out fromspan> industrial grade polycarbonate or fire resistant abs mspan>aterial including cutting hole in tile and mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amspan>p. flush type non mspan>odular socket mspan>ade out fromspan> industrial grade polycarbonate or fire resistant abs mspan>aterial, brass termspan>inal with porcelain based back cover & captive screws including cutting hole in tile and mspan>aking connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demspan>olishing stone rubble mspan>asonry mspan>anually/ by mspan>echanical mspan>eans including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge: in cemspan>ent mspan>ortar. dismspan>antling stone slab roofing over wooden karries and battens (dismspan>antling karries and battens to be paid for separately) including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>eter lead: demspan>olishing cemspan>ent concrete mspan>anually/ by mspan>echanical mspan>eans including disposal of mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mspan>ix. dismspan>antling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumspan>ping ground within 50 mspan>eter lead. earth work in excavation by mspan>echanical mspan>eans (hydraulic excavator )/ mspan>anual mspan>eans in foundation trenches or drains (not exceeding 1.5 mspan> in width or 10 sqmspan> on plan) including dressing of sides and ramspan>mspan>ing of bottomspan>s, lift upto 1.5 mspan>, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramspan>mspan>ing and disposal of surplus excavated soil as directed with in a lead of 50 mspan>eter. all kinds of soils providing and laying in position cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cemspan>ent : 4 coarse sand : 8 graded stone aggregate 40 mspan>mspan> nomspan>inal size). providing and laying in position cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. mspan>10 grade nomspan>inal mspan>ix 1: 3: 6 (1 cemspan>ent : 3 coarse sand : 6 graded stone aggregate 20mspan>mspan> nomspan>inal size). supply & stacking good soil of earth at site comspan>plete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cmspan>. in depth, consolidating each deposited layer by ramspan>mspan>ing and watering including lead up to 50 mspan>eter and with all lift. randomspan> rubble stone mspan>asonry for with hard stone in foundation and plinth in cemspan>ent sand mspan>ortar above 30 cmspan> thick wall in:cemspan>ent mspan>ortar 1:6 ( 1-cemspan>ent : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and remspan>oval of formspan>work for upto floor five level for :columspan>ns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and remspan>oval of formspan>work for upto floor five level for : columspan>ns, pillars, posts and struts etc. providing and laying in position specified grade of cemspan>ent concrete for rcc structural elemspan>ents upto floor five level including curing, comspan>paction, finishing with rendering in cemspan>ent sand mspan>ortar 1:3 (1 cemspan>ent: 3 coarse sand) and mspan>aking good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcemspan>ent for beamspan>s, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.mspan>20 grade nomspan>inal mspan>ix / design mspan>ix providing and laying in position specified grade of cemspan>ent concrete for rcc structural elemspan>ents upto floor five level including curing, comspan>paction, finishing with rendering in cemspan>ent sand mspan>ortar 1:3 (1 cemspan>ent: 3 coarse sand) and mspan>aking good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcemspan>ent for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columspan>ns, pillars, piers, abutmspan>ents, posts and struts etc.mspan>20 grade nomspan>inal mspan>ix / design mspan>ix roviding mspan>-25 grade concrete by using cemspan>ent as per codal provision instead of mspan>-20 grade design mspan>ix. providing and fabricating reinforcemspan>ent for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all comspan>plete up to floor five level. thermspan>o-mspan>echanically treated bars (conformspan>ing of relevent is code) kota stone slab flooring 25 mspan>mspan> thick over 20 mspan>mspan> (average) thick base laid over and jointed with grey cemspan>ent slurry mspan>ixed with pigmspan>ent to mspan>atch the shade of the slab including rubbing and polishing comspan>plete with base of cemspan>ent mspan>ortar 1 : 4 (1 cemspan>ent : 4 coarse sand) for area of each slab fromspan> 2001 to 5000 sq.cmspan> : kota stone slabs 25 mspan>mspan> thick in risers of steps, skirting, dado and pillars laid on 12 mspan>mspan> (average) thick cemspan>ent mspan>ortar 1:3 (1 cemspan>ent 3 coarse sand) and jointed with grey cemspan>ent slurry mspan>ixed with pigmspan>ent to mspan>atch the shade of the slabs, including rubbing and polishing comspan>plete for area of each slab upto 2001 sqcmspan> grading roof for water proofing treatmspan>ent with water proffing comspan>pound cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 graded stone aggregate 20 mspan>mspan> nomspan>inal size) gola providing gola 75x75 mspan>mspan> in cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 stone aggregate 10mspan>mspan> and down gauge) including finishing with cemspan>ent mspan>ortar 1:3 (1 cemspan>ent : 3 fine sand) as per standard design : plaster on new surface on walls in cemspan>ent sand mspan>ortar 1:6 including racking of joint etc. comspan>plete fine finish :20mspan>mspan> thick. finishing walls with acrylic smspan>ooth exterior paint of required shade including all scaffolding. new work (two or mspan>ore coat applied @ 1.67 ltr/10 sqmspan> over and including base coat of water proofing cemspan>ent paint applied @ 2.20 kg/ 10 sqmspan> ). distemspan>pering with oil bound washable distemspan>per of approved brand and mspan>anufacture to give an even shade including all scaffolding:new work (two or mspan>ore coats) over and including scrapping and primspan>ing coat with cemspan>ent primspan>er. "copping : providing and laying cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in retaining walls, return walls, walls (any thickness) including attached pilasters, columspan>ns, piers, abutmspan>ents, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. mspan>20 grade nomspan>inal mspan>ix 1: 1.5: 3 (1 cemspan>ent : 1.5 coarse sand : 3 graded stone aggregate 20 mspan>mspan> nomspan>inal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized mspan>odular box with earth termspan>inal, 6 a mspan>odular switch, mspan>odular face plate with grid plate, 3 pin ceiling rose / lamspan>p holder/ 3 pin connector , screws etc, mspan>aking connections,all as per pre approved by engineer in charge, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mspan>tr.) mspan>ediumspan> point (up to 6 mspan>tr) long point (up to 10 mspan>tr) wiring of 3/5 pin 6 amspan>p. light plug point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth termspan>inal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mspan>mspan> thick isi mspan>arked phenolic lamspan>inated sheet (is : 2036 - 1995), al. alloy/ cadmspan>iumspan> plated iron screws 20 mspan>mspan> cup washers etc. all as per pre approved by engineer in charge, mspan>aking connections, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and mspan>aking good the samspan>e as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submspan>itted before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . mspan>mspan>s (9537 p-111)pvc condute.25mspan>mspan>. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmspan>mspan> supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmspan>mspan> providing & fixing of ip20 smspan>d mspan>id power led batten type integrated light fixture mspan>ade fromspan> polycarbonate /extruded alumspan>iniumspan> powder coated housing with in built driver , power consumspan>ption of 18w/20w ,systemspan> lumspan>en efficacy = 120 lmspan>/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life timspan>e of mspan>inimspan>umspan> 50000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. 1170mspan>mspan>(+/-10%) led batten with mspan>in. lumspan>en output 2200 lmspan> providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with systemspan> lumspan>en efficacy =100 lmspan>/watt output ,pf 0.95 , cri >70, mspan>inimspan>umspan> life timspan>e of mspan>inimspan>umspan> 25000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for led fixtures. (lmspan>79/lmspan>80) certificate / report fromspan> oemspan> shall be submspan>itted. all as per pre approved by engineer in charge . for additional technical paramspan>eters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, alumspan>iniumspan> body & mspan>etallic blade ceiling fan conformspan>ing to all the performspan>ance requiremspan>ents laid down in is 374:2019 including all amspan>endmspan>ents, as applicable ; & carry bis licensing (i.e. isi mspan>arking) with down rod up to 80 cmspan> with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mspan>mspan> pvc insulated flexible copper conductor mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi mspan>arked (is:1258) batten/angle lamspan>p holder with cmspan>/l no. printed and mspan>ade out fromspan> industrial grade polycarbonate or fire resistant abs mspan>aterial, brass termspan>inal & captive screwsincluding mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mspan>mspan> thick mspan>.s. recessed fan box, hexagonal/ round of size 130 mspan>mspan> dia, depth 75mspan>mspan>, 12 mspan>mspan> dia rod fan hook with 100 mspan>mspan> length extended on each side . all as per pre approved by engineer in charge. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi mspan>arked is:13947-iii/conformspan>ing to iec 60947-3, suitable for ac22a utilization catagory, 4kv imspan>pulse withstand voltage, true contact indication, red colour dolly / lever shall have single mspan>ould covering over all poles for operation , two position din rail mspan>ounting, mspan>inimspan>umspan> phase termspan>ination capacity of 35sq.mspan>mspan>. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including mspan>aking connections, testing etc. as required. oemspan> shall have submspan>it nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 30/40 amspan>p rating . providing & fixing of mspan>odular type 120 w step fan regulator duly isi mspan>arked (is 11037:1984 ) with cmspan>/l no. printed mspan>ade out of unbreakable and fire retardant vergin poly carbonate with brass termspan>inals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,mspan>aking connections, testing etc. as required. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 mspan>odule 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demspan>olishing stone rubble mspan>asonry mspan>anually/ by mspan>echanical mspan>eans including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge: in cemspan>ent mspan>ortar. dismspan>antling stone slab roofing over wooden karries and battens (dismspan>antling karries and battens to be paid for separately) including stacking of serviceable mspan>aterial and disposal of unserviceable mspan>aterial within 50 mspan>eter lead: demspan>olishing cemspan>ent concrete mspan>anually/ by mspan>echanical mspan>eans including disposal of mspan>aterial within 50 mspan>etres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mspan>ix. randomspan> rubble stone mspan>asonry for with hard stone in foundation and plinth in cemspan>ent sand mspan>ortar above 30 cmspan> thick wall in:cemspan>ent mspan>ortar 1:6 ( 1-cemspan>ent : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and remspan>oval of formspan>work for upto floor five level for : columspan>ns, pillars, posts and struts etc. providing and laying in position specified grade of cemspan>ent concrete for rcc structural elemspan>ents upto floor five level including curing, comspan>paction, finishing with rendering in cemspan>ent sand mspan>ortar 1:3 (1 cemspan>ent: 3 coarse sand) and mspan>aking good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcemspan>ent for beamspan>s, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.mspan>20 grade nomspan>inal mspan>ix / design mspan>ix providing and fabricating reinforcemspan>ent for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all comspan>plete up to floor five level. thermspan>o-mspan>echanically treated bars (conformspan>ing of relevent is code) grading roof for water proofing treatmspan>ent with water proffing comspan>pound cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 graded stone aggregate 20 mspan>mspan> nomspan>inal size) gola providing gola 75x75 mspan>mspan> in cemspan>ent concrete 1:2:4 (1 cemspan>ent : 2 coarse sand : 4 stone aggregate 10mspan>mspan> and down gauge) including finishing with cemspan>ent mspan>ortar 1:3 (1 cemspan>ent : 3 fine sand) as per standard design : plaster on new surface on walls in cemspan>ent sand mspan>ortar 1:6 including racking of joint etc. comspan>plete fine finish :20mspan>mspan> thick. finishing walls with acrylic smspan>ooth exterior paint of required shade including all scaffolding. new work (two or mspan>ore coat applied @ 1.67 ltr/10 sqmspan> over and including base coat of water proofing cemspan>ent paint applied @ 2.20 kg/ 10 sqmspan> ). distemspan>pering with oil bound washable distemspan>per of approved brand and mspan>anufacture to give an even shade including all scaffolding:new work (two or mspan>ore coats) over and including scrapping and primspan>ing coat with cemspan>ent primspan>er. "copping : providing and laying cemspan>ent concrete including curing, comspan>paction etc. comspan>plete in retaining walls, return walls, walls (any thickness) including attached pilasters, columspan>ns, piers, abutmspan>ents, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. mspan>20 grade nomspan>inal mspan>ix 1: 1.5: 3 (1 cemspan>ent : 1.5 coarse sand : 3 graded stone aggregate 20 mspan>mspan> nomspan>inal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized mspan>odular box with earth termspan>inal, 6 a mspan>odular switch, mspan>odular face plate with grid plate, 3 pin ceiling rose / lamspan>p holder/ 3 pin connector , screws etc, mspan>aking connections,all as per pre approved by engineer in charge, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mspan>tr.) mspan>ediumspan> point (up to 6 mspan>tr) long point (up to 10 mspan>tr) wiring of 3/5 pin 6 amspan>p. light plug point as per pwd specification for electrical works with isi mspan>arked 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mspan>mspan> nomspan>inal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth termspan>inal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mspan>mspan> thick isi mspan>arked phenolic lamspan>inated sheet (is : 2036 - 1995), al. alloy/ cadmspan>iumspan> plated iron screws 20 mspan>mspan> cup washers etc. all as per pre approved by engineer in charge, mspan>aking connections, testing etc. comspan>plete as required. for specification of copper conductor, phenolic lamspan>inated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi mspan>arked mspan>mspan>s ( is:9537 p - iii ) vergin mspan>aterial pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and mspan>aking good the samspan>e as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submspan>itted before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . mspan>mspan>s (9537 p-111)pvc condute.25mspan>mspan>. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmspan>mspan> supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi mspan>arked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be mspan>ade fromspan> 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppmspan>) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flamspan>e retardant as per is 10810-53, better amspan>perage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ mspan>s conduit/casing capping including all as per pre approved by engineer in charge,mspan>aking connections, etc. as required. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for wires. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmspan>mspan> providing & fixing of ip20 smspan>d mspan>id power led batten type integrated light fixture mspan>ade fromspan> polycarbonate /extruded alumspan>iniumspan> powder coated housing with in built driver , power consumspan>ption of 18w/20w ,systemspan> lumspan>en efficacy = 120 lmspan>/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life timspan>e of mspan>inimspan>umspan> 50000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. 1170mspan>mspan>(+/-10%) led batten with mspan>in. lumspan>en output 2200 lmspan> providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with systemspan> lumspan>en efficacy =100 lmspan>/watt output ,pf 0.95 , cri >70, mspan>inimspan>umspan> life timspan>e of mspan>inimspan>umspan> 25000 burning hours with , 70% of intial lumspan>en mspan>aintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , mspan>aximspan>umspan> power consumspan>ption should not mspan>ore than the specified rating and fixture shall be of bis standard and trade mspan>ark certificate ( t.c.). mspan>anufactures word mspan>ark/ namspan>e engraved/ emspan>bossing/ screen printing on housing. oemspan> mspan>ust have its own in house nabl lab setup for all testing facilities for led fixtures. (lmspan>79/lmspan>80) certificate / report fromspan> oemspan> shall be submspan>itted. all as per pre approved by engineer in charge . for additional technical paramspan>eters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, alumspan>iniumspan> body & mspan>etallic blade ceiling fan conformspan>ing to all the performspan>ance requiremspan>ents laid down in is 374:2019 including all amspan>endmspan>ents, as applicable ; & carry bis licensing (i.e. isi mspan>arking) with down rod up to 80 cmspan> with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mspan>mspan> pvc insulated flexible copper conductor mspan>aking connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mspan>mspan> thick mspan>.s. recessed fan box, hexagonal/ round of size 130 mspan>mspan> dia, depth 75mspan>mspan>, 12 mspan>mspan> dia rod fan hook with 100 mspan>mspan> length extended on each side . all as per pre approved by engineer in charge. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi mspan>arked is:13947-iii/conformspan>ing to iec 60947-3, suitable for ac22a utilization catagory, 4kv imspan>pulse withstand voltage, true contact indication, red colour dolly / lever shall have single mspan>ould covering over all poles for operation , two position din rail mspan>ounting, mspan>inimspan>umspan> phase termspan>ination capacity of 35sq.mspan>mspan>. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including mspan>aking connections, testing etc. as required. oemspan> shall have submspan>it nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical paramspan>eters of products/ work , refer annexure "a" attached with this bsr . 30/40 amspan>p rating . providing & fixing of mspan>odular type 120 w step fan regulator duly isi mspan>arked (is 11037:1984 ) with cmspan>/l no. printed mspan>ade out of unbreakable and fire retardant vergin poly carbonate with brass termspan>inals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,mspan>aking connections, testing etc. as required. for additional technical paramspan>eters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 mspan>odule 360 dgree rotating

Central Government/Public Sector

TRN :35768434 | 11 Nov, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gemspan> bids for cordless brushless reversible imspan>pact wrench, headlamspan>prechargeable 1w led, scraping hose remspan>oval puller, mspan>agnetic pick up tools, socket set 8 to 32 mspan>mspan>, cuttingplier 8 inch, glass cutter, cushion grip screw driver set, cutting plier, synthetic flat tip paint brush, corded paintspray gun, allen key set black, paint spray electric

Central Government/Public Sector

TRN :35745104 | 13 Nov, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for gemspan> bids for repair, mspan>aintenance, and installation of plant/systemspan>s/equipmspan>ents version 2 - industry unit; contractfor scraper & slewing ring inspection in all thethree units of urea plant at rcf thal; buyer

Central Government / Public Sector

TRN :35746810 | 20 Nov, 2025

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for gemspan> bids for goods transport service per trip based service -transportation for collection of scrap fromspan>ordnance factory chanda chandrapur toordnance factory mspan>uradnagar ghaziabad by 25 mspan>tper trip truck on transporter risk as per termspan>s andconditions enclos.. /

Central Government / Public Sector

TRN :35749122 | 20 Nov, 2025

Tender Value : 0

Jalgaon - Maharashtra

Tender for gemspan> bids for goods transport service per trip based service -transportation of defence end product amspan>mspan>n boxescomspan>ponents mspan>aterial scrap etc to pune at differenctlocations; 9mspan>t 19 ft full body open top; 9mspan>t 19 ft

Central Government/Public Sector

TRN :35735737 | 14 Nov, 2025

Tender Value : 38.89 Lacs

Murshidabad - West Bengal

Tender for gemspan> bids for scrapper conveyor-100262327 itemspan> 10 mspan>5659150071, itemspan> 20 mspan>5600000058, itemspan> 30 mspan>5600000048, itemspan> 40 mspan>5600000049, itemspan> 50 mspan>5600000050

Co-operative

TRN :35739576 | 07 Nov, 2025

Tender Value : 55.00 Lacs

Mehsana - Gujarat

Tender for sale of cfp scrap mspan>aterial of various cattle feed products mspan>anufactured at ubkhal and jagudan locations of dudhsagar dairy, all types of jute bags, all types of woven/ plastic liner, 01/11/2025 to 31/12/2025 on as is, where is, what is basis.

corporations/Associations/Others

TRN :35742209 | 17 Nov, 2025

Tender Value : 0

Tirunelvelli - Tamil Nadu

Tender for specification for the sale of ferrous and non-ferrous scraps such as cond. transformspan>er, cond. lorry, cond. bus, emspan>pty steel drumspan>, mspan>s mspan>isc. scrap, rail pole cut bits scrap, other condemspan>ned ct, etc. cond. wind energy generating mspan>achines at mspan>upandal ce/d/tin/mspan>mspan>/scrap/eag02/25-26

Related Searched Keywords : m s scrap

List of m-s-scrap Tenders

Get m s scrap Tender Alert...

Related Searched Keywords : m s scrap

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us