Filters

List of lt-power-cable Tenders

List of latest lt-power-cable Tenders in Indian Tenders. Click on any lt-power-cable Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lt-power-cable Tenders.

All-Tenders (19)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government / Public Sector

TRN :35245708 | 17 Sep, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for ei, supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6616597* /dated: 27-08-2025 & & / bid document1 / 46 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Central Government/Public Sector

TRN :35230468 | 16 Sep, 2025

Tender Value : 3.63 Crore

Ranchi - Jharkhand

Tender for gem bids for armo, job contract for round the clock o and m for 1st year jobcontract for round the clock o and m for 2nd year transportation of diesel from aai authorised petrol pump topower house coordination for renewal of cea licence amc of hydraulic crash rated bollards and tyre killer for 1styear amc of hydraulic crash rated bollards and tyre killerfor 2nd year annual maintenance contract of rockwellautomation plc for 1st year annual maintenance contractof rockwell automation plc for 2nd year providing andfixing of vinyl sticker painting of electrical ht and ltpanels illumination decoration of city side of the airportfor 1st year illumination decoration of city side of theairport for 2nd year painting of street light poles of upto10 mtr height for 1st year painting of street light poles ofupto 10 mtr height for 2nd year inspection overhaulingservicing of siemens make 33 kv ht vcb for 1st year inspection overhauling servicing of siemens make 33 kv htvcb for 2nd year inspection overhauling servicing of land t make 800 or 1000 or 1250 amps acb for 1st year inspection overhauling servicing of l and t make 800 or1000 or 1250 amps acb for 2nd year inspectionoverhauling servicing of l and t make 2500 amps acb for1st year inspection overhauling servicing of l and t make2500 amps acb for 2nd year breakdown service visits forattending complaints of siemens make 1250 amps vcbs breakdown service visits for attending complaints of l and tmake acbs testing of transformer oil sample for powertransformer for 1st year testing of transformer oil samplefor power transformer for 2nd year dehydration andfiltration of transformer oil for 1st year dehydration andfiltration of transformer oil for 2nd year servicingchecking overhauling and testing of 1600kva 33kvtransformer for first year servicing checking overhauling bid number gem2025b6613333 dated 26-08-2025 bid document1 52 1 1 and testing of 1600kva 33kv transformer for second year, servicing testing and calibration of numerical relays at33kv ht panel for first year, servicing testing andcalibration of numerical relays at 33kv ht panel forsecond year, servicing testing and calibration of auxillaryrelays for first year, servicing testing and calibration ofauxillary relays for second year, providing lettering upto50mm letter height, providing lettering excedding 50mmletter height but not excedding 100mm letter height, lifting and lowering of submersible pump set of upto 5 hpcapacity, repairing servicing of submersible openwellborewell pumpset of capacity upto 3 hp, repairingservicing of submersible openwell borewell pumpset ofcapacity above 3hp upto 5hp, rewinding of submersibleopenwell borewell pumpset of capacity upto 3 hp, rewinding of submersible openwell borewell pumpset ofcapacity above 3hp upto 5hp, dismantling overhauling andservicing of all type of centrifugal pumpsets from 7.5 to 10hp, dismantling the existing centrifugal pumpset andrewinding from 7.5 to 10 hp, fabrication and supply ofstainless steel board with suitable ss stand of approx 4 ftheight, providing and fixing danger plates made of 1.6 mmmild steel for hv of size 250 mm x 200 mm, providing andfixing danger plates made of 1.6 mm mild steel mv of size200 mm x 150 mm, providing single line diagram on 5mmthick aluminium sheet in a0 size, supply and fixing of anticondensation panel space heater flat type of min 80 w, supply and fixing of anti condensation panel space heaterjaali type of min 100 w, supply and fixing of capillarythermostat for panel space heater, suppy fixing wiringand programming of the microprocessor based intelligentapfc controller, fabrication supply and installation of wallmounted street light panel, supply and fixing of fireretardant electrically insulated synthetic mat suitable for 33kv ac grade, supply and fixing of fire retardant electricallyinsulated synthetic mat for voltage not exceeding 3.3 kv ac, identifying detecting cable fault for lt cable, identifyingdetecting cable fault for ht cable 33kkv grade, dismantling of the faulty high bay led light fitting, installation testing and commissioning of repaired new ledhigh bay light fittings, supply of following sizes isi markedfrls pvc insulated single core 1.5 sqmm copper cable, supply of following sizes isi marked frls pvc insulatedsingle core 2.5 sqmm copper cable, supply of followingsizes isi marked frls pvc insulated single core 4 sqmmcopper cable, supply of following sizes isi marked multicorefrls pvc insulated 3core x 1.5 sqmm copper cable, supply of following sizes isi marked multicore frls pvcinsulated 3core x 2.5 sqmm copper cable, supply offollowing sizes isi marked multicore frls pvc insulated3core x 4 sqmm copper cable, supply of led batten lightof 20w, supply of single phase wall mounted oscillatingtype fan with 3 blade, supply of single phase oscillatingtype pedestal fan with 3 blade, supply of shunt release coilfor l and t make upower fp acb, supply of 3hp dol panelboard pump starter, supply of heavy duty sealedmaintenance free battery of 12v 180 ah, supply of heavyduty sealed maintenance free battery of 12v 18 ah, supply of heavy duty sealed maintenance free battery of12v 7 ah, supply of heavy duty sealed maintenance freebattery of 12v 2.5 ah, supply of 10 mtr led rope light withip 65 protection, supply of constant current led driver of36 watts, supply of constant current led driver of 60watts, supply of constant current led driver of 120 watts //bid details2 / 52, supply of 12 feet height a type self supported foldablealuminium step ladder, supply of digital earth resistancetester, supply of artificial resuscitator, supply of singlephase highly insulated frp earth discharge rods, supply oftransformer oil conforming to is 335, supply of silica gelcrystals for power transformer, supply of first aid box, supply of caution board of 1.6 mm ms sheet and size 450mm x 300 mm, supplying of rubber hand gloves for 33 kv, providing excavater jcb including operator and fuel, providing hydra machine including operator and fuel, providing one welder alongwith electric welding machineand welding rods, dsr-2022 electrical of rs. 500000.00

Central Government/Public Sector

TRN :35232539 | 23 Sep, 2025

Tender Value : 79.00 Lacs

Ernakulam - Kerala

Tender for addition / alteration and improvement to lt power supply distribution by conversion of over head lt lines to under ground cable at varuna residential area of npol, kochi

Central Government/Public Sector

TRN :35233905 | 08 Sep, 2025

Tender Value : 8.00 Lacs

West Kameng - Arunachal Pradesh

Tender for gem bids for santoshi, plain copier paper v3 isi marked to is 14490 q4 photography paper v2 q4 black lead pencils v2 asper is 1375 q4 eraser q4 pins paper straight as peris 5653 q4 clips paper as per is 5650 q4 fluidcorrection pen v2 q4 rollerball pen v3 q4 gel penv3 q4 ball point pens v2 as per is 3705 q4 stamppads q4 stamp - pad ink as per is 393 q4 sketch penv2 q4 stapler pin staples v2 q4 permanentmarker pen q4 highlighter pen q4 glue stick v2 q4 self adhesive flags v2 q4 desktop calculator -electronics q4 register v2 q4 metric scales plasticfor general purposes as per is 1480 q4 markers for whiteboard v2 q4 drawing pins v2 as per is 5205 q4 paper weights q4 plotter paper size a0 36 inch 45 mtrslong 80 gsm 2 inch core tracing paper size a0 36 inch 45mtrs long 80 gsm 2 inch core bond paper a4 100 gsm500 sheets checking pencil for bold and non erasablemarking blue pack of 10 nos sharpner pack of 20 nos fevicol gum 200 gram bottle cd or dvd re writable cdor dvd mailor 6 pt 5 inch by 6 pt 5 inch brown tag white tag green stapler hd 10 kangaro stapler hp 45 kangaro paper cutter 18 mm stainless steel duster cloth white 2ftby 2ft binder clip 19 mm pack of 12 nos binder clip 25mm pack of 12 nos binder clip 32 mm pack of 12 nos transparent tape 1 by 2 inch transparent tape 1 inch transparent tape 2 inch brown tape big 2 inch tixo tapeblue file cover printed with mes logo blue maroon yellowand green white file cover printed with mes logo scissor large 8 point 25 inch scissor medium 6 inch pokerwith wooden handle note pad office diary note bookcover roll brown 15 inch by 8 mtrs long mouse pad lever arch box file 3 inch file binder box type stick pad 4inch by 3 inch dry bty 1 pt 5v aa pack of 10 envelop a4 bid number gem2025b6604219 dated 26-08-2025 bid document1 119 1 1 size for do pack of 100 nos, envelop 11 inch by 5 inchpack of 100 nos, envelop 12cm by 27cm with cloth pack of100 nos, envelop 10 inch by 8 inch pack of 100 nos, damper sponge pad, first sight dak folder leather, service folder leather, round mesh pen stand, analogwall clock 32cm by 32cm by 3 pt 5cm white, hp laser jetprint cartridge w1002yc, cartridge hp 77 a, cartridge plh 2612a canon, epson printer ink bk 774, epson 664 inkset four colour in pack, ink of printer model epson008colour black, ink of printer model epson008 colour yellow, ink of printer model epson008 colour magenta, ink ofprinter model epson008 colour cyan, hp 738 130 mlmagenta designjet ink cartridge, hp 738 130 ml yellowdesignjet ink cartridge, hp 738 130 ml cyan designjet inkcartridge, hp 738 130 ml black designjet ink cartridge, ink btl black btd60bk 108 ml for brother printer, ink btlcyan bt5000c 48 pt 80 ml for brother printer, ink btlmagenta bt5000c 48 pt 80 ml for brother printer, ink btlyellow bt5000c 48 pt 80 ml for brother printer, roomfreshener lavender mist 220ml, broom soft, bucket spinmop stick rod with microfiber refill pocha cleaner 42 inch, disinfectant surface and floor cleaner liquid 1 ltr, phenoylfloor cleaner 1 ltr, glass and surface cleaner 500 ml, antiseptic liquid 1000 ml, tissue paper, hand towel bigsize, toilet cleaner 500ml, bathroom air freshner blocks 75gm, broom hard, air power pocket bathroom freshenerpack of 3, borosil glass medium pack of 6 nos, twin jutesutli, liquid hand wash 200 ml, foot mat jute type, kentro membrane in welded housing, kent ro sediment filter, kent ro inline carbon filter, kent ro uf filter, kent ro10 inch membrane, kent ro 10 inch span candel, kent rosediment filter 10 inch thread, kent ro 10 inch ctocarbon, smps for kent ro, extension cord 4 sockets, 2port printer selector switch for computer alongwith 2 pcsprinter cable, serving tray rrectangular, serving traysmall 8 inch, car dashboard polish 500 ml, microfibrecloth 400 gsm, tyre polish 350 ml, car air freshener coolsurface blue 45 gm, plastic floor wiper 30 cm w handle, toilet cleaner brush, urinal cubes 120 gm, mosquito killermachine w 2 refills 45ml, office almirah steel largestandred size 198cm h by 91 pt 5cm w by 48 pt 6 cm d 22gauge sides and 20 guages doors grey colour and 4compartments, pad lock 7 levers w 2 keys, sprint highspeed 450mm pedestal fan white, name board acwecontract and cwe, heating rod for room heater usha, heating rod for room heater bajaj, table top glass 3 pt 5 ftby 2 ft by 12mm, notice bd 3 ft by 2 ft cushion type, notice bd 4 ft by 3 ft white, quarter plate white pack of 6nos, plastic bucket with mug, modular table with particleboard table top and wooden 600mm d by 1200mm l by25mm thick, executive high back revolving chair ofadjustable hieigh with wheels 600mm w by 710mm d by1220mm h, runner visitors chair 560mm w by 600mm dby 970mm h, room heater 1500w pacifio mica, momentoas per sample approved, coaster set pack of 6 nos, usbcable male to male 5 mtr long, self ink stamp cwe, stamp date and year, note pad diary for offrs with leathercover, curtains 7 ft by 4 ft with rod and bracket, curtain 4ft by 4 ft with rod and bracket, brass letters for cwe tenurebdplain copier paper legal size 75 gsm, plain copier paper a4size 75 gsm, glossy photo paper a4 180 gsm pack of 50sheets, plotter paper size a0 36 inch 45 mtrs long 80 gsm 2inch core, tracing paper size a0 36 inch 45 mtrs long 80gsm 2 inch core, bond paper a4 100 gsm 500 sheets

Central Government/Public Sector

TRN :35226720 | 16 Sep, 2025

Tender Value : 3.22 Crore

Ranchi - Jharkhand

Tender for gem bids for providing operation and maintenance services for 1st year, providing operation and maintenance services for 2nd year, testing bdv value of transformer oil for 1st year, testingbdv value of transformer oil for 2nd year, dehydration andfiltration of transformer oil for 1st year, dehydration andfiltration of transformer oilfor 2nd year, servicing, maintenance and testing of air circuit breaker for 1st year, servicing, maintenance and testing of air circuit breaker for2ndear, servicing, maintenance and calibration of earthfault for 1st year, servicing, maintenance and calibration ofearth fault for 2nd year, servicing, maintenance and testingof 33 kv ht for 1st year, servicing, maintenance andtesting of 33 kv ht for 2nd year, calibration of followingequiments annually clinometer for papi, repair of led type15w search light, painting of perimeter or street light poleupto 5.0 m, painting of perimeter or street light pole above5.0 m upto 9.0 m, painting of lt panels with syntheticenamel, painting of elevated type runway edge light, repair of siren upto 3 hp etc., repair of crash bell etc., sitc of slim type guidance sign board of various sizes, identifying cable fault of the defective power cable by usingcable tracer lt cable, identifying cable fault of thedefective power cable by using cable tracer lt cable htcable 33 kv grade, supply of 4.00 sqmm 3 core flat cablepvc, supply of following size multicore flexible cable, 2 x2.5 sqmm, supply of following size multicore flexible cable, 3 x 2.5 sqmm, supply of medium intensity aviationobstruction light, supply of cable trench cover of 10 mmthick, supply of siren minimum audible upto 1 km, supplyof crash bell or gong bell 12 inch, supply of 200 w 6.6 abipin runway halogen type lamp, supply of 105 w 6.6 ahalogen lamp for inset fittings, supply of 200 w 6.6 aelevated approach halogen type lamp, supply of runwaybi pin lamp holder, supply of 6 sq.mm 5 kv grade plug andrecaptable, supply of 16 sq.mm 5 kv grade plug andrecaptable, supply of secondary 2 pin lead of 0.3 mtrlength, supply of two pin secondary plug assembly forpapi, supply of led signage converter capable to drive ledstrips of 5.5w, supply of led signage strip of 0.5 w for 11nos. in one strip, supply of medium intensity elevated typeomni directional, supply of breakable coupling for amamake glf light fittings, supply of isolating transformer 200w, 20, supply of isolating transformer 200 w, 6.6, supplyof isolating transformer 45 w, 20, supply of isolatingtransformer 45 w, 6.6, supply of isolating transformer 15w, 20, supply of isolating transformer 15 w, 6.6, supply ofisolating transformer 300 w, 6.6, supply of 360 clear innerlens filter for runway edge light fitings, supply of 360 clearouter lens filter runway edge light fitings, supply of 180deg clear inner lens filter runway edge light fitings, supplyof 180 deg red lens filter runway edge light fitings, supplyof 180 deg yellow lens filter runway edge light fitings, supply of red lens for papi, supply of clear lens for papi, supply of red spreader lens for end light fiting, supply ofgreen spreader lens for threshold light fiting, supply ofreflector for papi, supply of ht tape for afl cable, supplyof pvc tape, supply of airfield signage facia sheet 4 mmthick made of poly carbonate sheet, dsr 2022 cpwdelectrical items rs. 1000000

Central Government / Public Sector

TRN :35204082 | 12 Sep, 2025

Tender Value : 0

Aluva - Kerala

Tender for gem bids for all in one pc v2 q2, entry and mid level laptop -notebook q2, multifunction machine mfm v2 q2, lineinteractive ups with avr v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, additional doc 3 requested inatc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6569411; /dated: 22-08-2025 & & / bid document1 / 21 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryall in one pc v2 r r & t & t /time allowed for technicalclarifications during technical evaluation3 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methoditem wise evaluation/ x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail b /requiredno /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials are2 / 21 validated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. r r r r / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: r / evaluation schedules & / / item/category / quantityschedule 1all in one pc v22schedule 2entry and mid level laptop - notebook2schedule 3multifunction machine mfm v21schedule 4line interactive ups with avr v24all in one pc v2 2 pieces t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warranty3 / 21 processor numberintel core i5-12400, intel core i5-12500, intel core i5-13400t, intel core i7 12700t, intel core i5-12600, intel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900, intelcore ultra 5-235, intel core ultra 7-265 or higheroperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemoryram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches53.1 - 58 20.91 - 22.83 /speci cation t t /specificationname b b r r /bid requirementallowed values //n ; z n ; z /consignees/reporting officer and quantity5. .5. ./s.no. //n ; z n ; z /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1akhil p. a683106, dco stores, muttomdepot kmrl, aluva230entry and mid level laptop - notebook 2 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed values4 / 21 constructiondescription of storeslaptop with on site 1 year oem warranty, biospassword, 1- inbuilt rj45 gigabit ethernet port 1-rj45 adapter in case not inbuilt, minimum 2 number ofusb type a 3.0 ports 1- type c to type a compatibleadapter in case only 1 usb type a 3.0 port isprovided, minimum 1 type c usb 3.0 port, 1- hdmiport, wi-fi 5 802.11ac or higher, bluetooth 5.0 orhigher, dc adapter jack, built-in stereo speakers withhigh definition audio support, built-in microphone, keyboard with touchpad, minimum li-ion batterycapacity -36 watt hour with minimum 8 hour batterybackup and integrated webcamprocessorlaptop typemid levelprocessor numberamd ryzen 5 5625u, intel core i5 - 1245u or higheroperating systemoperating system factorypre-loadedwindow 11 professionalmemoryram size gb16.0 or higherdisplaydisplay size in cm -diagonal35.56 to 38.09 14 in to 14.99 instoragecapacity of storage drivein gb1024, 2048 or higher /speci cation t t /specificationname b b r r /bid requirementallowed values //n ; z n ; z /consignees/reporting officer and quantity5. .5. ./s.no. //n ; z n ; z /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1akhil p. a683106, dco stores, muttomdepot kmrl, aluva230multifunction machine mfm v2 1 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescription of storesmultifunction machine printer with minimum 1 year onsite warranty, including cartridge and powercord/adapterprint technologylasertype of printingcolour or higher5 / 21 printingprint paper sizea4, a3 and legalminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to180 or higherminimum print speed perminute as per iso/iec 24734in a4 size-colour in ppm26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to180 or higherminimum speed per minuteas per iso/iec 24734 in a3size-mono in ppm11 to 15, 16 to 20, 21 to 25, 26 to 30, 31 to 35, 36 to40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90 or higherminimum speed per minuteas per iso/iec 24734 in a3size-color in ppm11 to 15, 16 to 20, 21 to 25, 26 to 30, 31 to 35, 36 to40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90 or higherauto duplexingprinting/coping 2-sidedfeatureyes or higherpaper handlingoriginal document feedertype for scanning andcopyingsingle-pass document feeders spdf or highernumber of main paper tray2connectivityconnectivityusb port, ethernet port, wi-fi /speci cation t t /specificationname b b r r /bid requirementallowed values //n ; z n ; z /consignees/reporting officer and quantity5. .5. ./s.no. //n ; z n ; z /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1akhil p. a683106, dco stores, muttomdepot kmrl, aluva130line interactive ups with avr v2 4 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0, 1.5, 2.0, 3 or higher6 / 21 technologymosfet-pwminverter efficiency %70% or better or higherminimum guaranteedbattery backup timeminutes on full load120, 180, 240 or higherwarranty for lineinteractive ups3 years, 4 years, 5 years or higherbattery/backupbankwarranty for the batteryfrom the date of delivery2 years or higherfeaturesrated output volt withtotal harmonic distortion%single phase quasi sinewave 230 v ac 50 hz withtotal harmonic distortion as < 40%, single phasesinewave 230v ac 50hz with total harmonicdistortion as <3% or highervariation in avr output inac mode avr voltageregulation230 volts +/-15% /speci cation t t /specificationname b b r r /bid requirementallowed values //n ; z n ; z /consignees/reporting officer and quantity5. .5. ./s.no. //n ; z n ; z /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1akhil p. a683106, dco stores, muttomdepot kmrl, aluva430buyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1item schedule 1technicalspecification of all indesktopviewitem schedule 1 technical specificationof all in desktopall in one pc v222item schedule 2technicalspecification oflaptopviewitem schedule 2 technical specificationof laptopentry and mid level laptop -notebook27 / 21 item schedule3technicalspecification ofprinterviewitem schedule 3 technical specificationof printermultifunction machine mfm v214item schedule4technicalspecification of upsviewitem schedule 4 technical specificationof upsline interactive ups with avrv245. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. itemsthe uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:4 effective from 28-07-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.8 / 21 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft or hold a valid authorisation frommicrosoftb. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that the authorisation from microsoft shall not bemade a mandatory requirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system9 / 21 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.10 / 21 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.11 / 21 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:5 effective from 28-07-2025 for category entry and mid levellaptop - notebook1. for buyers 12 / 21 the category has been created in accordance with the model technical specificationissued by the ministry of electronics and information technology meity vide letterno. w-43/4/2020-iphw dated 19th august 2024, and is based on the parametersdefined therein. the specifications applicable to this category are as per the meitymodel technical specification dated 19th august 2024. accordingly, buyers shall notspecify or mandate any particular processor, processor brand, or manufacturer in theadditional terms and conditions atc. in this context, reference may also be madeto clause 2e of the gem general terms and conditions gtc, which inter aliastates: the specifications shall identify the key parameters defining the productswith all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering /buying the goods / services shall have to comply with the validation rules /restrictions provided for in the category specification. buyers / sellers cannot addparameters and / or drop down values not provided for in category specification. inview of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure fullcompliance with the predefined category specificationsproduct verificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.operating system1. there is no requirement that the oem of the laptop should be a devicepartner of microsoft or hold a valid authorisation from microsoft 2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that the authorisation from microsoft shall not be made amandatory requirement in bids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check the laptopoem website to verify the os by entering the pcs serial number and part codenumber. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supply hardware is compatible with windowsoperating systemstorage retentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the laptop-notebook under atc clause.requirement ofoem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.processors intel and amd processors are added as per model technical specification of laptop -notebook issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 202413 / 21 warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcenter to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes witha minimum standard on site warranty of one year. in case the seller hasstandard warranty more than one year, the same may be mentioned in thecatalogue including in the model name and in such case higher warrantyoffered shall prevail/supersede the minimum one year warranty.om related to mii, local content andmeity advice onmodel technicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.check points duringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.battery backupbuyer may check/validate battery backup time with appropriate benchmark.for sellers oem websitelink/part no forproduct verification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.changing oraltering theconfigurationseller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecenter.compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.mandatory /statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.operating systemit shall be the responsibility of oems to ensure that supplies are made with genuineoperating systems.14 / 21 special terms and conditions-version:4 effective from 31-01-2025 for category multifunctionmachine mfm v21. for buyers1productverificationthe buyer/consignee shall verify the complete product details, includingconfiguration, through the oem website. the buyer/consignee should be able toperform these verifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcentre to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the multifunctionmachine printer at the time of delivery to ensure that the product has not beenin use prior to delivery to the buyer and may be verified using themultifunction printer s built-in print counter or an equivalent tracking system asavailable with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers3oem websitelink/part nofor productverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. adevice serial number must also be provided at the time of supply, which must also bementioned on the product supplied. the buyer/consignee must be able to verify thecomplete product details, including configuration, through the provided oem websitelink. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digitalformat from the oem to the purchaser, guaranteeing the products coverageunder the specified warranty terms. the warranty certificate should beverifiable through the oem website/customer care centre.2. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within thewarranty period, whichever is earlier, i.e. once the printer meets either theminimum number of prints within the warranty period or the time durationspecified, the warranty coverage will end.3. the actual number of prints completed by the printer during the warrantyperiod may be verified using the printer s built-in print counter or an equivalenttracking system.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogueparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.5 5 : : /buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the original15 / 21 delivery period while exercising the option clause. bidders must comply with these terms.2. genericactual delivery and installation & commissioning if covered in scope of supply is to be done atfollowing addresssdgm procurement, kochi metro rail limited, dco stores, muttom depot, aluva, kochi, kerala - 683106mobile no. 9188957943, e mail id : procurement @kmrl.co.in.3. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take anyresponsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.4. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.5. genericmanufacturer authorization:wherever authorised distributors/service providers are submitting thebid, authorisation form /certificate with oem/original service provider details such as name, designation, address, e-mail id and phone no. required to be furnished along with the bid6. genericsupplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only.7. genericwhile generating invoice in gem portal, the seller must upload scanned copy of gst invoice and thescreenshot of gst portal confirming payment of gst.8. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods9. buyer added bid specific atcbuyer added text based atc clauses1 important note: some technical parameters are auto-mapped in gem category speci cation of the tender document from the existing reference product . however all participants shall quote for the item in line with bid speci c technical speci cations and scope of work provided in the bid document.2 repeat order clause: the contract will have repeat order clause, wherein kmrl can order under the contract within six months from the date of completion of supply under the original po. the repeat order will have rates on not exceeding basis while the terms and conditions will remain unchanged. it will be entirely the discretion of kmrl to exercise the repeat order or not16 / 21 .3 the quoted line items shall be in accordance with the bureau of indian standards as per mohua noti cation no. v-11/15/2020-bis dated 01.02.2021 if applicable4 public procurement preference to make in india as per ministry of commerce & industry dpiit noti cation no. dpiit order no. p-45021/2/2017-pp be-ii dated 16.09.2020 and any amendments thereof will be applicable.5 warranty period: the successful bidder shall provide a warranty for all theitems from the date of acceptance by the purchaser/ consignee and warranty certi cate to be submitted along with the material while supplying the item.details are as follows:a item schedule 1 all in desktop : 12 monthsb item schedule 2 laptop : 12 monthsc item schedule 3 printer : 12 monthsd item schedule 4 ups : 36 months6 valid oem authorization/ maf/dealership certi cate issued by the oem to be submitted.7 the successful bidder whose aggregate turnover in any preceding nancial year starting from 2017-18 exceeds rs. 5 crores, has to mandatorily submite-invoice along with the supply of items. in case e invoicing is not applicable, e - invoice exemption declaration form shall be submitted by bidder along with invoice. if the above mentioned form cannot be led due to non-enablement of e- invoicing as turnover is less than 5 cr, proof of the same shall be submitted along with invoice. 8 rejection of materials/items/ equipment: materials/items/ equipment supplied shall be new, unused and the specifications in line with the purchaseorder/contract issued by kmrl. in case of any rejection of material due to poor quality/ faulty design/ transit damages, vendor s shall take back rejected products immediately within 07 days after receiving the intimation from kmrl and the rejected item to be replaced with new product/ recti ed product immediately at vendors expense, including all freight costs. payment will be released only after the successful replacement of the rejected materials/items by the vendor. in case of any fail in collecting the rejected items from kmrl store within 30 days, from the date of receipt of rejection intimation from kmrl, item will be scrapped without any further intimation.9 bidder shall submit the following documents while bidding, i. appendix 1 tender check listii. appendix 2: company profileiii. appendix 3: compliance with technical speci cation & scope of work andbuyer added bid additional terms and conditions .iv. sealed and signed document of technical specification & special conditions document attached in buyer added bid speci c additional scope of work. 17 / 21 v. make/model and data sheet / catalogue of offered item.vi. valid oem authorization/ maf/dealership certificate issued by the oem.10 determination of responsiveness:bid of those tenderers shall be considered as non-responsive & shall be rejected post clarification if any if:a the quoted item fails to meet the specified technical requirements.b non-submission of documents as per clause 9 of buyer uploaded atc document.11 payment terms : payment will be released after all statutorydeductions, retention / deduction due to penalty/ liquidated damages as applicable after acceptance of item/work done. the following documents must be submitted for payment.a original tax invoiceb warranty certificate.c for materials: acceptance of material by the purchaser or consignee.d any other document if requested by kmrlnote: no advance payment will be made. in the case of msme bidders, payments shall be released within 45 days from the date of acceptance of the goods or successful completion of the work, as applicable by kmrlsubmission of invoicea invoices submitted by successful bidders should be e invoices i.e, invoices electronically uploaded and authenticated with a unique irn and digitallysigned qr code. in case e invoicing is not applicable, e invoice exemption declaration form shall be submitted by vendor along with invoice. if the above mentioned form cannot be led due to non-enablement of e- invoicing asturnover is less than 5 cr., proof of the same shall be submitted along with invoice.b the gstin of kochi metro rail ltd is 32aaeck5274h1zlc while generating invoice in gem portal, the seller must upload scanned copy of gst invoice and the screenshot of gst portal con rming payment of gst.d gst at actuals shall be paid on the quoted base value as per gst law in india after submission of appropriate gst invoices with gstin of the bidder and gstin of kochi metro rail ltd - 32aaeck5274h1zl.e under gst law the contractor shall also comply regarding filing of all the returns to the gst network/government departments within the stipulated time every month or such other period as required by the government. if the contractor does not comply with any of the gst laws and procedures and if kmrl incurs any liability on this account or does not get the input credit from the gst network/government as goods and/or service receiver due to thecontractor s failure to comply with the procedures of ling / uploading of data/submissions of documents etc in time then all such liability including the18 / 21 input credit of the gst lost by kmrl and the penalties and interest incurred by kmrl would be the liability of the contractor and the same shall be recovered either by recovery from security deposits / any other amount payable by the contractor to kmrl or through direct payment. the contractor shall submit the copy of latest filed return - gstr1 along with the invoice.12 terms of pricea the quoted price shall be inclusive of gst, all other applicable taxes, duties, transportation, packing, forwarding, loading & unloading, installation andother charges if any.b bidders are advised to check applicable gst on their own before quoting. buyer will not take any responsibility in this regards. gst reimbursementwill be as per actuals or as per applicable rates whichever is lower, subjectto the maximum of quoted gst %.c contract price will be the total price quoted inclusive of all taxes and including gst.d the tax liability as per gst act rests with the contractor, ambiguity if any regarding the percentage for that particular work or services accounting code sac/hsn etc. shall be cleared before offering of rates.e any liability on account of wrong classification of goods or services for arriving at taxes will be on the bidder.13 retention amount: a retention amounting to 5% of the gross amount of each bill will be deducted at the time of each payment, for the due execution and completion of the supply and warranty obligation. this retention amount is liable to be forfeited, partly or wholly, if the contractor fails to carry out the assignment or to keep up the desired rate of progress as per contract.the retention amount will be released after 60 days on successful completion of warranty/dlp/

Central Government/Public Sector

TRN :35201197 | 11 Sep, 2025

Tender Value : 46.50 Lacs

Siliguri - West Bengal

Tender for provn of lt feeder panel, lt cable network with connected items and provn of electrical power audit under power smart army mission psam of e/m under ge tenga.

Central Government/Public Sector

TRN :35166886 | 08 Sep, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for 19 ipad ltu shelf with single power supply, ncui4 cardfor ipda shelf, subscriber line module analog slamv, 24ports with license, 24 pair cable for subscriber card, luna2 power supply for ltu shelf

Central Government/Public Sector

TRN :35154641 | 15 Sep, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for proc, 10520620 lv7 t 815 hmv 6x6 558 106 750 6 mmu 1740 1set up gauge 10347251 lv7 av 15 578 903 911 752 26dash board of crane 10319234 lv7 av 15 578 003 911152 65 guide of support 10332780 lv7 av 15 345 411366 547 cable part of connection 10565086 lv7 av15 578 903 959 75226 cable s29 10565113 lv7 av 15578 003 109 05285 dog clutch 10338585 lv7 av 15112 418 700 000 filter element h22 10344978 lv7 av15 578 003 101 052 43 gear wheel idler vi 10319220lv7 av 15 578 003 911 152 15 leading screw 10313768 lv7 av 15 578 003 944 152 28 rope link2x3400 kg 10326979 lv7 av 15 110 228 9144 shovelarmy type 10344822 lv7 av 15 443 853 030 723 switchppn 45 10334968 lv7 av 15 578 003 035 652 30 torsionleaf 10323907 lv7 av 15 1102 04 0189 hydrogenerator coupling 10367427 lv7 av 15 578 003 910952 28 axle suspension 10334934 lv7 av 15 442 075070 047 complete clamp 10315018 lv7 av 15 578 003912 952 28 suspension tower transport 10565077lv7 av 15 578 003 024 05280 pin 10347831 lv7 av 15578 003 100 652 43 brake hub 10356156 lv7 av 15 578903 913 252 28 front suspension 10340080 lv7 av 15532 938 290 091 bearing 10346795 lv7 av 15 578 003108 252 43 tension pulley 10335002 lv7 av 15 153992carrier 10329001 lv7 av 15 578 003 103 752 43carrier 10565071 lv7 av 15 405 611 900 647thermostst od 500326 10324848 lv7 av 15 578 003016 352 80 cover 10344638 lv7 av 15 578 003 104 55216 packing 10340299 lv7 av 15 273 521 120 003 shaftsealing 80x110x13 10324158 lv7 av 15 578 003 008852 16 lamellas carrier 10340982 lv7 av 15 574 034048 401 bush 10347056 lv7 av 15 578 003 000 552 00plate lifting power 10346812 lv7 av 15 578 003 108 bid number gem2025b6576943 dated 18-08-2025 bid document1 145 38 socket 10340505 lv7 av 15 578 003 053 052 62socket 10339802 lv7 av 15 273 521 123 003 oil seal130 x160x15 stn 029401 1 10326058 lv7 av 15 147 712000 000 circuit breaker azs5tu16 526 10329039 lv7av 15 578 003 003 852 62 push button 10335027 lv7av 15 578 003 039 052 30 screw complete 10335327lv7 av 15 578 003 102 352 34 screw 10565431 lv7 av15 578 000 307 352 62 pressure hose 10339965 lv7 av15 273 521 017 503 oil seal 60x90x13 stn 029401 0 10340874 lv7 av 15 574 012 056 601 notched coupling 10565124 lv7 av 15 578 003 011 35260 frame ofthrust mechanism 10334919 lv7 av 15 371 512 110000 filter noise killer 10326686 lv7 av 15 101 638123 0 back up ring eqpt sno 141 and above 10340768lv7 av 15 578 003 111 652 85 piston 10325001 lv7 av15 578 003 016 152 66 screw 10336024 lv7 av 15 273112 490 541 1 manzeta 55x56 10332898 lv7 av 15 336632 521 070 hose 722 061 010 700 10319588 lv7 hrvav 15 578 003 911 652 16 splined shaft and fork 10340848 lv7 hrv av 15 578 003 174 952 28 packing 10346368 lv8 pinaka lcr 8305522 limit switch 10330401 lv7 t 815 336 676 155 215 servo steeringtank no 05 16 1 10336592 lv7 t 815 442 079 230 224inflation distributor assy 10326006 lv7 t 815 207278 305 4 casin 10325381 lv7 t 815 993 200 681 0bearing 10320156 lv7 t 815 207 879 088 4 bellowspring 10317200 lv7 t 815 130 079 001 414 undercarriage wire harness 10331636 lv7 t 815 130 075720 824 suspension yoke l h 10330271 lv7 t 815 443612 198 0 trailer control valve 10319679 lv7 t 815993 200 780 0 stator 10322813 lv7 t 815 5945 720335127 flasher solid state 131 412 028 001 10614855 lv7 t 815 442 976 620 404 side cushion rh 10330102 lv7 t 815 4820 72 0159402 valve check 336522 310 500 10331780 lv7 t 815 443 612 237 0control valve ac574 ax 10337873 lv7 t 815 442 954162 964 upper gasket 2106 mm 273 412 050 038 10346811 lv7 t 815 4730 079471 suction tube 10346781 lv7 t 815 130 016 940 324 gear shift rodfront part 10330183 lv7 t 815 442 070 890 574suction tube 10314327 lv7 t 815 8x8 2530 018229booster cylindrical 10315378 lv7 t 815 2520 720306146 yoke universal joint vehicular 130 073 5 10346962 lv7 t 815 130 011 650 734 exhaust manifoldrear rh 10337827 lv7 t 815 8x8 442 076 613 034injector line 10331616 lv7 t 815 130 050 520 164spring 10317994 lv7 t 815 321 821 202 024protective glass white 10320174 lv7 t 815 3110 720026129 cone and rollers tapered roller bearing 10341116 lv7 t 815 442 076 500 914 fuel tank 10339322 lv7 t 815 130 071 110 514 gear shift lever 10346993 lv7 t 815 130 011 651 834 exhaust manifoldrear lh 10315347 lv7 t 815 130 051 250 304 platformpad 10313806 lv7 t 815 130 054 391 164 threadlelining 10332037 lv7 t 815 442 070 141 000 ball joint 10326181 lv7 t 815 1680 72 0304990 lever control130 074 670 524 10322630 lv7 t 815 130 965 050 394front apron lh 10324587 lv7 t 815 150 190 004 003modification kit for hand operated air 10312935lv7 t 815 130 054 391 104 protective bag 10325355lv7 t 815 993 200 636 0 solenoid 10316867 lv7 t 815298 703 106 4 equipped front cover 10333364 lv7 t815 4320 004048 pump body i 10322613 lv7 t 815 993050 549 0 two part piston 10323085 lv7 t 815 207 bid details2 145 1 1 112 033 4 handle with thread, 10323207 lv7 t 815443 935 018 500 flange, 10570925 lv7 t 815 485 sk00117 complete wire harness for hyd portion c, 10325727 lv7 t 815 207 116 089 4 brake pedal, 10318440 lv7 t 815 292 201 769 4 front mudguard rh, 10318426 lv7 t 815 292 201 768 4 front mudguardlh, 10324796 lv7 t 815 442 076 632 144 oil supplytube, 10332025 lv7 t 815 442 055 810 584 inflationboosting cover, 10327790 lv7 t 815 443 400 238 0007 pole socket 8jb 003 833 001, 10312759 lv7 t 815 548615 031 0 cable t1021000, 10335153 lv7 t 815 443 332235 0 rear view mirror rh z320 10004p, 10325112 lv7t 815 442 076 852 694 line to b cyl, 10320696 lv7 t815 993 200 810 0 spider clutch, 10325203 lv7 t 815993 200 609 0 spring belleville, 10320604 lv7 t 815993 050 554 0 brace air compressor, 10324090 lv7 t815 207 901 503 4 cunductor circuit breakerbattery, 10334025 lv7 t 815 4240 000477 maskwithout ports, 10346860 lv7 t 815 443 990 126 013nozzle, 10312945 lv7 t 815 993 050 101 0 bearingconnecting 0 25mm, 10332645 lv7 t 815 441 054 390554 bag, 10354501 lv7 t 815 442 076 853 584 line to bcyl, 10317978 lv7 t 815 294 001 032 4 flat windshield, 10326389 lv7 t 815 443 400 097 0 control unitkzm002 b, 10330454 lv7 t 815 442 010 620 564 pumphousing, 10347438 lv7 t 815 129 928 300 034 handlecover, 10316258 lv7 t 815 207 558 415 4 rear enginebkt rh, 10325107 lv7 t 815 993 200 363 0 sensor, 10331649 lv7 t 815 443 654 042 000 hose8x1100 tu 40dkl dkl 16x1 5, 10340529 lv7 t 815 452 335 643 310clamping strip 9x235 csn 02 2757, 10336681 lv7 t 8158x8 5340 180641 bracket, 10338396 lv7 t 815 5120423452 combination pliers 180 is 365c, 10611019 lv7t 815 8x8 442 017 221 204 gear of speed 2, 10337008lv7 t 815 443 400 398 0 flash beacon klx7000fl, 10589587 lv7 t 815 448 104 461 226 clip, 10322452 lv7t 815 993 050 485 0 seal dust, 10326382 lv7 t 815 443400 099 0 microphone amd540l, 10342258 lv7 t 815452 330 368 408 tube wabco wsw lt 6x1 din 73378pa11, 10324072 lv7 t 815 442 600 537 000 spring washer, 10327986 lv7 t 815 442 976 250 134 guide bar lh, 10610131 lv7 t 815 130 079 015 294 conductor, 10332902 lv7 t 815 441 954 480 524 tie rod clamp, 10318412 lv7 t 815 296 438 007 9 control lever, 10322578 lv7 t 815 207 924 110 4 hose, 10320997 lv7 t815 993 200 837 0 housing clutch, 10326025 lv7 t 815207 285 082 4 run in pair of gears, 10614860 lv7 t815 990 115 009 000 shaft19024394, 10614977 lv7 t815 443 998 115 015 fastening frame881004, 10319707 lv7 t 815 990 100 941 0 injector body cv2830515, 10328058 lv7 t 815 443 312 032 0 reartacctical lamp 891054, 10615003 lv7 t 815 150 229078 009 sotrage battery12v 180ah, 10612346 lv7 t815 442 012 370 484 pump drive gear, 10316427 lv7 t815 993 050 390 0 gear cover, 10312509 lv7 t 815 273110 417 0 sealing ring 285x3 fkm 75, 10322715 lv7 t815 2990 72 0310035 cable assembly control 130 075063 654, 10343111 lv7 t 815 443 930 131 747 brush, 10312578 lv7 t 815 4x4 442 074 011 594 rear wheelhub, 10322405 lv7 t 815 4x4 107 113 950 000 ball pinzf 0501 204 714, 10335851 lv7 t 815 4x4 443 930 159970 stator, 10559543 lv7 t 815 8x8 483 512 014 000turbo blowerhx 50w 3850995, 10344661 lv7 t 8158x8 549 451 707 000 steering closure set 6009d //bid details3 / 145 a, 10331650 lv7 t 815 8x8 442 070 410 084 neck, 10345120 lv7 t 815 8x8 5340 72 0238020 snap hook 130046 410 014, 10517346 lv7 t 815 hmv 6x6 443 400 190 0pressure switch, 10329900 lv7 t 815 4x4 443 641 051000 electric valve 324411315, 10331607 lv7 t 815 4x4442 029 360 074 carrier head, 10330971 lv7 t 815 4x4442 979 430 174 seam cover, 10330085 lv7 t 815 4x4207 310 048 4 intermediate lever, 10329537 lv7 t 8154x4 483 zz0 206 1 seal kit for hand pump, 10322839lv7 t 815 4x4 442 073 560 374 handle assy for sparewheel, 10330086 lv7 t 815 4x4 443 654 120 000 hose4x400 dkl dkl 12x1 5mi, 10335455 lv7 t 815 4x4 urn020 341 573 909 720 6 wrench for nut 442052571324, 10524135 lv7 t 815 hmv 442 079 010 704 conductor, 10524989 lv7 t 815 hmv 442 072 502 364 rear axle 1st, 10524980 lv7 t 815 hmv 442 072 502 374 rear axle2nd, 10589501 lv7 t 815 hmv 442 987 420 924instrument panel, 10517763 lv7 t 815 hmv 442 987300 974 control panel, 10523807 lv7 t 815 hmv 442077 400 974 set of gasket for gear 19 items, 10516842 lv7 t 815 hmv 442 073 011 204 king pin lh, 10615182 lv7 t 815 hmv 442 960 110 074 wall rh, 10515368 lv7 t 815 hmv 207 026 047 4 lower cover, 10615219 lv7 t 815 hmv 442 071 098 000 king pin lh, 10615251 lv7 t 815 hmv 482 hp 02036 jib crane assy, 10520495 lv7 t 815 hmv 573 909 510 6 prm 3184extractor of crown wheel hub bearings and fron, 10522983 lv7 t 815 hmv 207 285 053 4 pair of gears lh, 10589502 lv7 t 815 hmv 442 078 990 964 electricinstallation, 10524513 lv7 t 815 hmv 442 925 810 184cover sheet lh, 10615321 lv7 t 815 hmv 990 300 413000 differential housingsp, 10615197 lv7 t 815 hmv442 017 640 754 rear cover, 10615218 lv7 t 815 hmv442 071 097 000 king pin rh, 10589622 lv7 t 815 hmv442 078 991 914 electric installation of cab, 10531207 lv7 t 815 hmv 2590 72 0307878 covervehicular components, 10523266 lv7 t 815 hmv 130011 300 074 holder, 10532479 lv7 t 815 hmv 442 030580 224 torsion bar arm rh, 10516411 lv7 t 815 hmv442 075 911 744 exhaust tube, 10519157 lv7 t 815hmv 442 170 535 029 trg aggr clutch disc zvs, 10520678 lv7 t 815 hmv 573 910 730 6 prl 0952 valveguide driver, 10615279 lv7 t 815 hmv 482 hp 02028seat cum box assy, 10337796 lv7 t 816 993 050 009 0alternator, 10356971 lv7 t 816 443 115 027 0 staterdelgo remy 42 mt 400, 10348181 lv7 t 816 443 400 5580 fan kysor 4735 42890 01, 10325227 lv7 t 816 993100 856 0 magnet solenoid switch, 10341812 lv7 t816 295 416 124 4 front glass gasket, 10323286 lv7 t816 993 101 176 0 fuel line, 10352065 lv7 t 816 207033 426 4 hose to turbo charger, 10340528 lv7 t 816207 532 015 4 control cylinder, 10339107 lv7 t 816549 451 703 0 steering lock 6009d, 10352809 lv7 t816 207 902 476 4 front cable assy abs, 10348177 lv7t 816 443 319 030 0 voltage transformer 24 12v, 10334246 lv8 pinaka lcr z 9926000915 coil, 10335726lv8 pinaka lcr til z 9372010165 repair kit compritems marked withlv7/t-815 hmv 6x6 558-106-750-6 mmu-1740.1 set upgauge, lv7/av-15 578-903-911-752-26 dash board ofcrane, lv7/av-15 578-003-911-152-65 guide of support, lv7/av-15 345-411-366-547 cable part of connection, lv7/av-15 578-903-959-75226 cable s29, lv7/av-15 578-003-109-05285 dog clutch, lv7/av-15 112-418-700-000filter element h22, lv7/av-15 578-003-101-052-43 gearwheel idler vi, lv7/av-15 578-003-911-152-15 leading //bid details4 / 145 screw, lv7/av-15 578-003-944-152-28 rope link 2x3400kg, lv7/av-15 110-228-9144 shovel army type, lv7/av-15 443-853-030-723 switch ppn 45, lv7/av-15 578-003-035-652-30 torsion leaf, lv7/av-15 1102-04-0189hydro generator coupling, lv7/av-15 578-003-910-952-28 axle suspension, lv7/av-15 442-075-070-047complete clamp, lv7/av-15 578-003-912-952-28suspension tower transport, lv7/av-15 578-003-024-05280 pin, lv7/av-15 578-003-100-652-43 brake hub, lv7/av-15 578-903-913-252-28 front suspension, lv7/av-15 532-938-290-091 bearing, lv7/av-15 578-003-108-252-43 tension pulley, lv7/av-15 153992 carrier, lv7/av-15 578-003-103-752-43 carrier, lv7/av-15 405-611-900-647 thermostst- od 500326, lv7/av-15 578-003-016-352-80 cover, lv7/av-15 578-003-104-552-16packing, lv7/av-15 273-521-120-003 shaft sealing80x110x13, lv7/av-15 578-003-008-852-16 lamellascarrier, lv7/av-15 574-034-048-401 bush, lv7/av-15578-003-000-552-00 plate lifting power, lv7/av-15 578-003-108-052-38 socket, lv7/av-15 578-003-053-052-62socket, lv7/av-15 273-521-123-003 oil seal 130x160x15 stn 029401.1, lv7/av-15 147-712-000-000circuit breaker azs5tu16-526, lv7/av-15 578-003-003-852-62 push button, lv7/av-15 578-003-039-052-30screw complete, lv7/av-15 578-003-102-352-34 screw, lv7/av-15 578-000-307-352-62 pressure hose, lv7/av-15273-521-017-503 oil seal 60x90x13 stn 029401.0, lv7/av-15 574-012-056-601 notched coupling, lv7/av-15 578-003-011-35260 frame of thrust mechanism, lv7/av-15 371-512-110-000 filter noise killer, lv7/av-15 101-638-123-0 back up ring eqpt sno 141 andabove , lv7/av-15 578-003-111-652-85 piston, lv7/av-15578-003-016-152-66 screw, lv7/av-15 273-112-490-541-1manzeta 55x56, lv7/av-15 336-632-521-070 hose 722061 010 700, lv7/hrv av-15 578-003-911-652-16 splinedshaft & fork, lv7/hrv av-15 578-003-174-952-28packing, lv8/pinaka/lcr 8305522 limit switch, lv7/t-815 336-676-155-215 servo steering tank no 05-16-1, lv7/t-815 442-079-230-224 inflation distributor assy, lv7/t-815 207-278-305-4 casin, lv7/t-815 993-200-681-0bearing, lv7/t-815 207-879-088-4 bellow spring, lv7/t-815 130-079-001-414 under carriage wire harness, lv7/t-815 130-075-720-824 suspension yoke l.h., lv7/t-815 443-612-198-0 trailer control valve, lv7/t-815993-200-780-0 stator, lv7/t-815 5945-72-0335127flasher solid state 131 412 028 001 , lv7/t-815 442-976-620-404 side cushion rh, lv7/t-815 4820-72-0159402 valve check336 522 310 500, lv7/t-815 443-612-237-0 control valve ac574 ax, lv7/t-815 442-954-162-964 upper gasket 2106 mm 273 412 050 038, lv7/t-815 4730 079471 suction tube, lv7/t-815 130-016-940-324 gear shift rod front part, lv7/t-815 442-070-890-574 suction tube, lv7/t-815 8x8 2530 018229booster cylindrical, lv7/t-815 2520-72-0306146 yokeuniversal joint vehicular130-073-5, lv7/t-815 130-011-650-734 exhaust manifold rear rh, lv7/t-8158x8 442-076-613-034 injector line, lv7/t-815 130-050-520-164 spring, lv7/t-815 321-821-202-024 protectiveglass white, lv7/t-815 3110-72-0026129 cone androllers tapered roller bearing, lv7/t-815 442-076-500-914 fuel tank, lv7/t-815 130-071-110-514 gearshift lever, lv7/t-815 130-011-651-834 exhaustmanifold rear lh, lv7/t-815 130-051-250-304 platformpad, lv7/t-815 130-054-391-164 threadle lining, lv7/t-

Related Searched Keywords : lt power cable

List of lt-power-cable Tenders

Tender for addition / alteration and improvement to lt power supply distribution by conversion of over head lt lines to under ground cable at varuna residential area of npol, kochi

Tender for provn of lt feeder panel, lt cable network with connected items and provn of electrical power audit under power smart army mission psam of e/m under ge tenga.

Tender for gem bids for 19 ipad ltu shelf with single power supply, ncui4 cardfor ipda shelf, subscriber line module analog slamv, 24ports with license, 24 pair cable for subscriber card, luna2 power supply for ltu shelf

Get lt power cable Tender Alert...

Related Searched Keywords : lt power cable

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us