Filters

List of lt-meter-box Tenders

List of latest lt-meter-box Tenders in Indian Tenders. Click on any lt-meter-box Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lt-meter-box Tenders.

All-Tenders (13)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35749619 | 10 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for sheet bakelite , tape pvc , sheet bake , bell indication 12 way , pvc gang box , batten nails , pvc flexible , shadals various , telephone nails , plastic rawal plug , bulb 100 , false ceiling , bell cord less , bell indication , bus bar , electronic meter , fan hook , plug top 15 amp , pvc 200mm , pvc 250mm , pvc 300mm , pvc bulb holder angular type , pvc gang box 15 amp , hexa blade double ended , holder bipin rotraty , insulation tape , switch neon indicator , plywood mdf board 8x4x18mm , plywood , glass shelf , low level , pvc pipe 75mm , sink coupling 100mm , cp peg set of 06 , cp hand shower , curtain rod , pvc pipe 100mm , glass sheet frosted , waste pipe , door stopper , waste coupling , cp brass soap dish , handle aluminum 150mm , tower bolt ms 100 mm , bracket sider end doom , glass sheet clear , tower bolt , cp brass , bracket for fancy , mortice lock , aluminum hinges 100 mm , door seal 900mm long , grating cp , door seal 1200 mm long , thread for plumber , ms hinges 100mm , helical door spring , grating cp stainles , nipple hexa 15 mm , hamber drill bit , rawal plug , blade cutter iron , paper holder , m seal , washer for cistern , fevicol , ss handle , wire mesh , magnetic catcher , dr fixit , tarpentine oil , pvc ball , drip seal , angular stop cock , ms hasp and stapple , drain cover mm , drain cover , taflon tape , star bit for drill , glass shelf 600mm long , 15mm kitec elbow , 15mm kitec socket , 15mm kitec tee , 15mm kitec union , kitec connectore , electric insulation rubber mat , street light 120w , street light 90w , spot light green , spot light warm white , spot light cool white 12w , contractor 185 amp 415 v , contractor 40 amp 415 v , led recess , cable pvc 16 sqmm 1 core , cable pvc 2 point 5 sqmm 1core , cable pvc 1 point 5 sqmm 3 core , cable pvc 1 point 5 sqmm 1core , led lamp 12 watt , led lamp 9 watt , led recessed luminaire 12 watt , led surface celing , cable pvc flat , led spot light 12 , automatic star , dol starter , calling bell ding dong , insualtion tape , aluminium thimble 150 , aluminium thimble 400 , plug top 3 pin16 amp , modular fan regulator , switch board boxes 6 modular , aluminium inline , aluminium thimble , switch board boxes , cable jointing kit , aluminium inline connector 185 , modular bell push , aluminium inline connector 95 , aluminium inline connector , aluminuum thimble 95 , aluminium thimble 50 , aluminuum thimble 70 , pvc gang , aluminium thimble 35 sqmm , aluminium thimble 25 , insulation tape , batten holder 6 amp , connector 35 sqmm , inline connector , aluminium connector , junction box , bulb 100 w , industrial socket , aluminium inline 50 , pvc condute pipe 20 mm , pvc condute clamp , modular plate 3 module , modular plate 4 module , modular plate 6 module , hydraulic door closer , glass sheet , stainless steel curtain rod , glass sheet clear , copper sulphate , frame plate 6 module , aluminium door seal , nrv 150 mm , patchmat bitumen , cp brass extension nipple , hack saw blade double edge , brass nozzle 15 mm for fountain , frame plate 3 module , nrv 100 mm , hex nipple 20 mm x 50 mm , ht tape black roll of 20 mtr , brass spindle , particle board , brass nozzle , ms but hinge 100 mm , ball valve brass , hex nipple , bearing grease , magnetic door catcher , cp brass urinal , cp wall bracket l shape , insulated tape , cp end bracket , blanking plate , lime , industrial socket 63 amp , floor door closer , aluminim hasp and staple , wire clamp 10 mm , batten nail , pvc internal cistern10 ltr capacity , tank 1000 ltr , ss curtain rod , sliding bolt , cotton thread 1 pkt 60 pcs , aluminium sheet 1 mm thick , toilet seat covers (v2) (q4) , ptmt tap fitting (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type modular domestic fan regulator as per is 11037 (q3)

Central Government/Public Sector

TRN :35741351 | 11 Nov, 2025

Tender Value : 0

Sriganganagar - Rajasthan

Tender for gem bids for boq, adhesive plaster micro porous tape 2 inch box of 6 adhesive plaster micro porous tape 3 inches box of 4 antid rho immunoglobulin monoclonal vial of 100 by 150 mcg anti d rho immunoglobulin monoclonal vial of 300 by 350mcg bain circuit paed set single use complete bandage tshaped bandage elastic adhesive 6 cm into 3 mtr bandage triangular bandage open woven uncomp 10 cminto 4 mtr bandage open woven uncomp 6 cm into 4 mtr bandage plaster of paris 10 cm into 3 metres bandageplaster of paris 15 cm into 3 metres cannula iv withinjection port and wings size 18 g cannula iv with injectionport and wings size 20g cannula iv with injection port andwings size 24g catheter suction endobronchial non toxicpvc tubing size fg 14 length 50 cm central venouscatheter triple lumen s 7 cervical collar soft l cordclamp cotton wool absorbent pkt of 500 gm cotton woolnon absorbent pkt of 500 gm cr film 10 into 8 dryfixsmart cart of 125 film cr film 12 into 10 dryfix smart cartof 125 film cr film 12 into 10 for trimax 40 cart of 125film disposable gown disposable labour kit disposableplastic infusion set for iv fluids pyrogen free nylon disposable plastic infusion set for plasma blood pyrogenfree nylon disposable shoe cover first aid medicatedbandage single strip waterproof ecg electrodesdisposable ecg recording paper 210mm into 20mm extension tubing with three way stop cock 10 cms in length film x-ray 30point 5 cm into 25point 4 cm 12into 10 highspeed foleys balloon catheter 2 way silicon 16g foleysballoon catheter 2 way silicon 20g gauze surgical openwoven unmedicated 60 cm wide hand gloves size 7 1by2pair of hand gloves size 7 pair of hme filters insulindisposable syringe 1 ml knife bard parker commercial no15 pkt of 6 knife bard parker commercial no 10 pkt of 6 bid number gem2025b6806994 dated 30-10-2025 bid document1 68 1 1 knife bard parker commercial no 11 pkt of 6, knife bardparker commercial no 12 pkt of 6, knife bard parkercommercial no 20 pkt of 6, knife bard parker commercialno 22 pkt of 6, liquid developer for automatic processorpack of 6 ltr, liquid fixer for automatic processor pack of6ltr, lung exerciser spirometer, medium and highconcentration o2 masks pvc 7 ft oxygen supply tubing paed, medium and high concentration o2 masks pvc 7 ft oxygensupply tubing adult, naso gastric tube adult 100 cm long16g, naso gastric tube adult 100 cm long 18g, padabdominal swab 25 into 25 cm with tape 30 cm, padabdominal swab 40 into 25 cm with tape 30 cm, preknotted surgical suture catgut endoloop, pressuremonitoring line 100cm by 200cm, serum albumin 20 perclow salt bott of 100 ml, serum albumin 20 perc bott of 50ml, skin stapler for wound closure, spinal needle size 26gquinkee, supraglotic device non inflat cuff gastric drainport size 1 1point 5 2 2point5, supraglotic device non inflatcuff gastric drain port size 3 4 5, surgeons caps disposable, surgeons mask disposable, syringe disposable 20 ml, syringe disposable 50 ml, syringe disposable plastic sterile2 ml with needle, syringe disposable plastic sterile 5 mlwith needle, syringe disposable plastic sterile 10 ml withneedle, three way stop cock plastic, t piece in three sizes, tube endo tracheal pvc size 5 point 0 with cuff, tubeendo tracheal pvc size 6 point 0 with cuff, tube endotracheal pvc size 4 point 5 with cuff, tube endo trachealpvc size 5 point 5 with cuff, tube endo tracheal pvc size 6point 5 with cuff, tube endo tracheal pvc size 7 point 0with cuff, tube endo tracheal pvc size 7 point 5 with cuff, tube endo tracheal pvc size 8 point 0 with cuff, tube endotracheal pvc size 8 point 5 with cuff, tube feeding smoothplastic infant 38 cm long 5f with red flexible, tube feedingsmooth plastic infant 38 cm long 8f with red flexible, ultrasound jelly tube of 250 gm, urine collecting bag withvolume meter, vaccum blood collection tubes with needlesk3edta in tubes of vol 02 ml, vaccum blood collectiontubes with needles sterile tube with gel 5ml, vaccumblood collection tubes with needles edta 3 ml, vaccumblood collection tubes with needles sodium citrate 3ml, ventilator circuit adult, ventilator circuit paedadhesive plaster micro porous tape 2 inch box of 6, adhesive plaster micro porous tape 3 inches, box of 4, antid rho immunoglobulin monoclonal vial of 100 by 150 mcg, anti d rho immunoglobulin monoclonal vial of 300 by 350mcg, bain circuit paed set single use complete, bandage tshaped, bandage elastic adhesive 6 cm into 3 mtrstretched, bandage triangular, bandage open wovenuncomp 10 cm into 4 mtr, bandage open woven uncomp 6cm into 4 mtr, bandage plaster of paris 10 cm into 3 metres, bandage plaster of paris 15 cm into 3 metres, cannula ivwith injection port and wings size 18 g, cannula iv withinjection port and wings size 20g, cannula iv with injectionport and wings size 24g, catheter suction endobronchialnon toxic pvc tubing size fg 14 length 50 cm, centralvenous catheter triple lumen s 7, cervical collar soft l, cord clamp, cotton wool absorbent pkt of 500 gm, cottonwool non absorbent pkt of 500 gm, cr film 10 into 8 dryfixsmart cart of 125 film, cr film 12 into 10 dryfix smart cartof 125 film, cr film 12 into 10 for trimax 40 cart of 125film, disposable gown, disposable labour kit, disposableplastic infusion set for iv fluids pyrogen free nylon, disposable plastic infusion set for plasma blood pyrogenfree nylon, disposable shoe cover, first aid medicatedbandage single strip waterproof, ecg electrodes //bid details2 / 68

Central Government And Public Sector

TRN :35725984 | 10 Nov, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6827905* /dated: 27-10-2025 & & / bid document1 / 47 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Central Government/Public Sector

TRN :35702907 | 13 Nov, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for front axle oil seal sml 4x4 truck, wheel cylinderassy sml truck, wheel cylinder assy 7853sml truck, wheel cylinder assy 7850 sml truck, wheelcylinder assy 7851 sml truck, wheel cylinder assy7852 sml truck, wheel cylinder assy 7826 sml truck, speedo meter sensors sml truck, front axle oilseal sml truck, front hub oil seal sml truck, glassmachine sml rh smltruck, brake shoe with rivetsml truck, wheel cly assy 7833 sml truck, wheelcly assy 7835 sml truck, radiator cap sml truck, king pin bearing sml truck, power steering pipe smltruck, front main leaf spring sml truck, frontcenter bolt sml truck, brake pipe sml truck, brakedrum front sml truck, clutch plate assy sml truck, wiper arm sml truck sml truck, boost pressuresensor sml truck, regulator handle sml truck, pressure plate assy sml truck, crank positionsensor sml truck, wheel cylinder assy front smltruck, king pin bearing sml sml truck, oil filtersml truck, by pass filter sml truck, fuel filetr sethalf ltr sml truck, fan belt sml truck, fan belt smazada truck, side indicator assy bigtata 1212, side indicator assy small tata 1212, wiper motor 24volt tata 1212, tail light assy lh and rh tata -1212, king pin lower tata 1212 tc, front hub oil sealtata 1212 tc, clutch plate gb 60 tata 1212 tc, sleave cylinder assy gb 60 tata 1212 tc, gear boxoil seal gb 60 tata 1212 tc, gear box gas kit gb60tata 1212 tc, power steering container tata 712bus, king pin bush tata 1212, king pin bearing 4x4tata 1212, head lamp relay tata 1212, wiper bladetata 1212, wiper arm tata 1212, clutch slavecylinder assy tata 1212, timing oil seal tata 1212, timing gasket euro tata 1212, air comp ring tata1212, dai fram 331 tata 1212, oil filter tata 1212 tctata 1212, fuel water separator fs 1275 tata 1212, oil filter 1512 bus tata 1512, king pin bearing 4x4tata 407 truck, wheel cylinder 407 rh and lh tata407 truck, reverse gear switch tata 407 truck, airpipe jainner 6no tata 407 truck, wheel cyl assytata 407 bus, speedo meter sensor tata 407 truck, wheel cylinder assy tata 407 truck, right side huboil seal tata 407 truck, rear stock adjusterautomatic tata 407 truck, rear brake lining a and btata 407 truck, brake adjuster 407 lh and rh tata407 truck, oil filter 470 bs iii tata 407 truck, wiperblade lh and rh scorpio s11, vibration damperpully m and m scorpio, oil fiter scorpio m and mscorpio, oil filter maruti gypsy, timing oil sealmaruti gypsy, front axel oil seal maruti gypsy, front needle bearing maruti gypsy, front hub oilseal maruti gypsy, c v joint oil seal maruti gypsy, dicky lock assy maruti gypsy, baby filter marutigypsy, fuel tank motor maruti gypsy, fuel filtermaruti gypsy, uj cross maruti gypsy, hub bolt withnut maruti gypsy, clutch plate and pressure platemaruti gypsy, clutch release bearing maruti gypsy, fly wheel bearing maruti gypsy, oil filter tata sumo, anabond exp items, black tap exp items, doublebrake volve switch exp items, emery paper exp items, cutting blade exp items, hose pipe clamp exp items, tail lamp glass lh and rh tata exp items, benjo

Central Government And Public Sector

TRN :35677693 | 08 Nov, 2025

Tender Value : 1.00 Lacs

Godavari - Andhra Pradesh

Tender for gem bids for electrical service wire, 3 core 4 sqmm copper wire, 7 20single core wire, 2 point 5 sqmm copper wire, 63 a fusecut outs, electrical meter box waterproof, motor windingcharges, submersible motor pipe jointing kit, motor panelboard, capacitor, 32 amp mcb, tape rolls, plastic tags, gl clamps, motor lifting and install, electrician charges, 1inch garden hose pipe, 32 mm upvc pipe, 20 mm upvcpipe, cpvc ball valve, upvct bends l bends, providing1000 ltrs syntax water tank over iron stand including costof necessary plumbing fixture and labour charges etccomplete including taxes

State Government

TRN :35653275 | 05 Nov, 2025

Tender Value : 0

Latur - Maharashtra

Tender for supply medicine, surgical and chemical kits items - tab.amitriptyllin 25mg tab.amlodipin 5mg cap.amoxycillin 500mg tab.amoxy 500+clavulanic acid 125 tab.ascorbic acid 100mg tab.aspirin 75mg tab.atenelol 50mg tab.atrovastatin 10mg tab.azithromycin 500mg tab.calcium lactate +vit d3 tab. carbamazepine 200mg tab.cetrizine 10mg tab. ciprofloxacin 500mg tab.clonazepam 0.5 mg tab.diclofenac sodium 50mg cap.doxycyllin 100mg tab.escitalopram 10mg tab.fluconazole 150mg tab.frusemide 40mg cap.iron & folic acid (ferofolla) tab. itroconazole 100mg tab. ivermectine 12mg tab. isorbitrate 10mg tab. labetalol 100mg tab. lorazepam 2mg tab.metformin 500mg tab.metronidazole 400mg tab.misoprostal 200mcg cap. multivitamin tab. nefidepin 10mg tab.norflox 400mg tab.olenzapine 5mg tab.pantoprazole 40 mg tab.paracetamol 500mg tab.phenytoin sodium 100mg tab.prednisolone 5mg tab. sertaline 100mg tab.salbutamol 4mg tab.sodium valproate 200mg tab.trihexyphenidyl +trifluperazine tab.clopidogrel 75mg tab.glimipride 1gm (inj. & iv ) adrenaline bitartrate inj 1 mg/ml adenosine inj. amikacin inj 500mg 2ml amiodarone injection amoxycilline with clavulanic acid inj 1.2 gm anti rabies serum 1500iu inj anti rh d inj 300 mcg anti rabies vaccine 1ml atracurium 2.5ml asyclovir 500mg inj. atropine inj 1ml inj. asvs bupivacaine + dextrose 4ml butrophenol inj buprenorphine inj caffiene inj. calcium gluconate 10ml carboprost 250mcg cefotaxime 1gm injection clindamycin 600mg injection colisthimithate 10lakh iu inj. dexamethazone inj 2ml dexmedetomidine inj deriphylline 2ml inj. diclofenac sodium 1 ml injection diclofenac sodium 3 ml injection diltiazem injection diazipam inj dobutamine 5ml inj dopamine 5ml inj. drotavarine 40mg frusemide inj 2ml gentamycin inj glycopyrrolate inj 1ml haloperidol inj. heparin 25000iu inj. hyluronidase 1500iu inj. hydrocortisone sodium succinate inj 100mg hepamerz inj. human actrapid insuline 10ml iron sucrose 5ml ketamine inj. labetalol 20mg, 4ml inj low molucular heparine 0.6ml lignocaine hydrochloride 2% 30ml lignocaine with adrenaline(1:80000) 30ml levetiracetam 500mg inj lorazepam inj loxicard 4% 50ml inj. magnesium sulphate inj 2 ml menadione sodium bisulphite inj 1ml (vit k) mephentermine inj 10ml meropenum 1gm inj inj. methyl prednisolone 500mg(iv use) midazolam 10ml mucinac (n-acetyl cysteine) neostigmine inj 1ml noradrenaline 2ml inj. nitroglycerin octriotide 100mg inj ondonsetron 2mg inj. oxytocin 5iu/ml 1ml pantoprazole 40mg inj pentazocine lactate inj 1ml inj. phenobarbotone phenaramine maleate inj 2ml phenytoine sodium inj 2ml piperacillin sodium 4gm + tazobactam inj potassium chloride inj 10ml pralidoxime chloride inj 500gm promethazine hcl inj propofol 10ml inj. ropivcaine 20ml. rituximab 500mg/50ml injection sodium bicarbonate 10ml sodium valporate inj. streptokinase 15lac inj. succinyl choline tetanus immunoglobuline 500iu inj. tetanus toxoid 5ml tetanus toxide 0.5ml tramadol 50mg inj. tranexamic acid inj thiamine inj. valenthamide bromide inj vancomycine 1gm inj. vecuronium 4mg inj. iv human immunoglobulin 5%, 100ml iv human albumin 20% hepatetis b immunoglobulin 100iu iv amino acid 500ml iv fat emulsion 250ml iv sodium chloride 0.9% 500ml iv sodium chloride 0.9% 100ml iv ringer lactate 500ml iv dextrose with sodium chloride 500ml iv ciprofloxacin 100ml iv metronidazole 100ml iv manitol 100ml iv linezolid 200mg/100ml inj. suggamadex(inj. reversal) iv glycine irrigation solutin 3liter iv sodium chloride solution 3liter jar iv livofloxacin 500mg/100ml iv paracetamol 100ml (liquid and orals)amoxy+potacium clavunic oral susp. 30ml antacid syrup betadine povidone iodine 5% solution 500ml budesunide respulses 0.5mg 2ml calamine lotion calcium phospate + vitd3 syp. 200ml carboxymethyl cellulose eye drop 10ml cetrizine syrup 30ml ciprofloxacin + dexamethazone e/d ciprofloxacin eye/ ear drop clobetasol ointment 30gm clotrimazole cream 15gm dinoprostone gel 30gm desflurane liquid 240 flurbiprofen eye drop 5ml formaldehyde solition 400ml glycerin ip hydrogen peroxide 100ml hydrogen peroxide+ silver nitrate 1 ltr. (sanishield) lignocaine jelly 2% 30gm liquid parafine 500ml liquid sevoflurane 250ml lulliconazole ointment magnesium sulphate 400gm miconazole nitrate cream 2% 15gm moxifloxacin eye drop 5ml multivitamin syrup paediatric o-d spirit 1000ml ondensetron oral solution paracetamol syrup 60ml polymeric biagonide 1000ml (sanihygen) potasium permagnate (kmno4) powder povidone iodine ointment 15gm sanidex opa 5 ltr jar saniquid -m 20 handwash saniquid-p/ benzalconium 500ml saniscrum -m silver sulphadiazine cream sodium hypochlorite 200ml sodium hypochlorite 5ltr. jar (medichlore) surgical spirit 500ml wax solvant ear drop 5ml zinc sulphate syrup 60ml proparacain eye drop 0.5% 5ml tropicamide + phenylephrine eye drop tropicamide eye drop 5ml silver sulphadiazine ointment 250gm framycetin sulphate cream 30gm surfuctant 3ml vial duoline respulses duphilac syp. (suture, sergical and dressing material)absorbent cotton wool i.p packet of 500 gm net bandage cloth as per schedule fii of drugs and cosmetics act 1940 than of 100cm x 20 mtrs. absorbent gauze cloth as per schedule f-ii of drugs and cosmetics act.1940 than of 90cm x 18 mtrs mask triple layer face (disposable) intravenous infusion set adult urine bag 2000 ml disposable catheter foleys self retaining 2 ways size-8fr catheter foleys self retaining 2 ways size-10fr catheter foleys self retaining 2 ways size-12fr catheter foleys self retaining 2 ways size-14fr catheter foleys self retaining 2 ways size-16fr catheter foleys self retaining 2 ways size-18fr disposable insulin syringe u-40/1 ml each disposable syringe sterile with needle 2 ml disposable syringe sterile with needle 5 ml disposable syringe sterile with needle 10 ml disposable syringe sterile with needle 50 ml elastic adhesive bandage with adhesive mass (ip/usp/bp.) weight nlt (not less than) 145 gsm % stretch-not less than 75%, % regain ?not more than 65% size 10 cm x 4 mtrs cannula intra venous with needle in cannula i.p. with injection port, with wings size-18g cannula intra venous with needle in cannula i.p. with injection port, with wings size-20g cannula intra venous with needle in cannula i.p. with injection port, with wings size-22g cannula intra venous with needle in cannula i.p. with injection port, with wings size-24g cannula intra venous with needle in cannula i.p. with injection port, with wings size-26g cannula intra venous with needle in cannula i.p. with injection port, with wings size-23g cannula intra venous with needle in cannula i.p. with injection port, with wings size-27g catheter suction disposable size-8fr catheter suction disposable size-10fr catheter suction disposable size-12fr catheter suction disposable size-14fr catheter suction disposable size-16fr catheter suction disposable size-18fr gloves latex examination size-medium gloves latex examination size-large gloves rubber sterile, powder free isi mark size-6.5 inch gloves rubber sterile, powder free isi mark size-7 inch gloves rubber sterile, powder free isi mark size-7.5 inch plastic gloves disposable ryles tube sterile disposable size-14fr ryles tube sterile disposable size-16fr ryles tube sterile disposable size-18fr sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-3 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-3.5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-4 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-4.5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-5.5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-6.5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-7 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-7.5 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-8 mm id sterile disposable endotracheal tube cuffed/plain pvc transparent for adult use size-8.5 mm id infant feeding tube no. 7 infant feeding tube no. 8 plaster of paris bandages (ready made) size 15 cm x 2.7 m plaster of paris bandages (ready made) size 20 cm x 2.7 m adhesive tape cloth based with porous and hypoallergenic adhesive mass having uniform spiked impression size 10cm x 5mtr mask oxygen (adult) mask oxygen (paediatric) mask nebulizer adult mask nebulizer paediatric diaper adult disposable cap surgeon disposable evacuated tubes k2 edta with double cap 2 ml clot activator double cap non vacuum 4.0 ml (13 mm x 75 mm) evacuated tubes 3.2% buffered sodium citrate with double cap 2 ml tubes non vacuum disposable hiv kit autoclave indicator strip (label) pack of 100 lables (2.5 cm x 6 cm) oxygen nasal cannula adult oxygen nasal cannula neonatal rubber makintosh colour :green,blue, red, thickness-0.4mm, width 110cm. roll of 30 meters i.s.o. certified, isi markwidth cord clamp sterile biomedical waste container red colour 60 ltr. biomedical waste container yellow colour 60 ltr. biomedical waste container blue colour 60 ltr. biomedical waste container black colour 60 ltr. biodegradable bio medical waste bags colour red size 33inch x 36inch 51 micron (per kg) biodegradable bio medical waste bags colour yellow size 33inch x 36inch 51 micron (per kg) biodegradable bio medical waste bags colour blue size 33inch x 36inch 51 micron (per kg) biodegradable bio medical waste bags colour black size 33inch x 36inch 51 micron (per kg) airway plastic latex free size 3 airway plastic latex free size 4 airway plastic latex free size 5 dial flow regulator extension set venous extension line with 3way size-10cm venous extension line with 3way size-25cm venous extension line with 3way size-50cm venous extension line with 3way size-100cm venous extension line with 3way size-150cm j r circuit bain circuit adult ecg electrodes for adult ecg/ultrasonography jelly 250 ml central venous catheter kit size- 7 f x 16 cm type- triple lumen oxygen flow meter with rotameter & humidifier bottle abdominal drain kit 28 abdominal drain kit 30 abdominal drain kit 32 a.v.fistula needle set size 17g x 1 epidural anaesthesia set 16g epidural anaesthesia set 18g blood administration/ transfusion set drape disposable poly plain sheet 100cm x 150cm appron plastic disposable romovac drain set 12 f romovac drain set 14 f romovac drain set 16 f romovac drain set 18 f bactigauze (chlorhexidine gauze dressing) pack of 10 piece size- 10 cm x 10 cm picc line 22 colostomy bag dialyser adult hemodialysis tubing set lma [i gel] 3 lma [i gel] 4 lma [i gel] 5 bone wax (pack of 12 piece) collagen dressing 15cm x 30 cm (per piece) surgicel original 4 in x 8 in (12/box) skin stapler multidirectional 35 wides minivac drain 8 f minivac drain 10 f sideport 15 dg crescent 2.5 mm eye drape 70 cm x 70 cm (pack of 10) keratome blade 2.8 mm (chemical, diagnostic kits) glucose total bilirubin direct bilirubin sgot sgpt alkaline phosphatse total protein albumin urea creatinine total cholesterol triglycerides ldl cholesterol hdl cholesterol uric acid csf protein (microprotein) calcium phosphorus magnesium amylase lipase ckmb ldh ise module reagent na+/k+/cl-/li+ xl multical erba auto wash kit xl auto wash (a/al) erba norm erba path tubing kit pm kit h 360 dil-1 1 x 20 liters h 360 lyes- 3 x 500 ml elite h clean- 4 x 50 ml h-360 control l, n, h h-360 calibrator aspen ds diluent aspen m-6ld lyse aspen m-6fd dye aspen m-6lh lyse aspen m-6ln lyse aspen m-6fn dye aspen probe cleanser hbsag elisa kit (+10) hiv elisa 4 th gen.kit hcv elisa kit vdrl rpr kits (+10) antisera blood grouping kit abd igm (monoclonal) 3 x 10 ml denguecombo rapid test card hbsag rapid test card (antigen detection) (+10) abg cassette/strip calibration gas epoc bgem test card (pack of 25) syringe with needle 3 ml thermal roll 57 mm tsk gel b-thala his g8 filter element g8- thalassemia elution buffer kit hemolysis and wash solution (l) g 8 hemoglobin f & a2 control g 8 hemoglobin f & a2 calibrator ribbon, ebar printer bluing reagent hematoxylin 10x ssc solution, 2 l label, blank, flap, 540 roll lcs reaction buffer concentrate (10x) 10x ez prep solution, 2 l cell conditioning solution, cc1, 2l ultra view universal dab detection kit confirm anti-cd99 mouse mono confirm cytokeratin 20 rabit mono confirm anti-desmin (de-r-11) pab ventana anti-e cadherin (36) confirm cytokeratin 7 rabbit mono confirm anti-s100 (4c4.9) primary antibo ventana anti-p63 (4a4) mouse mono matrix gel card ahg (144 test) matrix liss solution (500 ml) uniplastin for prothromine time itinr cuvette formalin solution (37 to 40 %) xylene (sulpher free) micropipette tips 200 ul ethanol absolute alcohol paraffin wax confirm anti- pr (1 e2) confirm anti- er (sp1) pathway anti-her2/neu (4b5) rabbit mono confirm anti-ki-67 (30-9) rabbit monoclo confirm anti-p67 (d0-7) primary antibody lohexol dye 100ml

Related Searched Keywords : lt meter box

List of lt-meter-box Tenders

Get lt meter box Tender Alert...

Related Searched Keywords : lt meter box

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us