Filters

List of lp-sheet Tenders

List of latest lp-sheet Tenders in Indian Tenders. Click on any lp-sheet Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lp-sheet Tenders.

All-Tenders (21)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35351585 | 26 Sep, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of set of lavatory door arrangement for non set of lavatory door arrangement for non ac coaches to drg no. icf/std- 5-6-011, alt c col-iii & iv. one set consists col-iii qty - 01 no. & col-iv qty - 01 no. note: the colour, shade and pattern of panels shall be as per lp sheet sample code no. nac-sp05..

Central Government/Public Sector

TRN :35322479 | 30 Sep, 2025

Tender Value : 0

Medinipur - West Bengal

Tender for gem bids for lp, varnish, distemper white isi mark, super mop refills, polish metal brass, duster cloth, feather broom phooljhadu, cloth stocknite mutton cloth, sponge cloth, cleaner white toilet harpic, broom country, cotton waste, brush sweeping hand, glass cleaner five hundred ml, disinfectant fluid white black phenol, cleaning liquid forutensils, hand towel, steel cleaning liquid, spin mop set, cotton rags, cleaning bar for utensils five hundred gmspack, brush with long handle, abrasive paper twohundred thirty mm x two hundred eighty mm, naphthalene balls, plastic mugs, bag biodegradable forgarbage, dust bin, detergent powder inone kgs pack isimark, deodriser odonil refill, soap liquid toilet, roomfreshner, pest seal, hand wash liquid, paint brush fourinch, paint brush two inch, mosquito repellent gelodomos, spray hand liquid insecticide, mosquitorepellent machine, refill for automatic air freshmer twohundred fifty ml, rat sticking gel, ncml solution teepol, ncml solution oxalic acid, ncml solution thiourea, envelope size ten inch x fourteen inch, envelope size sixinch x twelve inch, envelope size four inch x ten inch, toilet paper, brown sheet laminated, paint roller fourinch, paint roller seven inch, paint roller twelve inch, paint roller nine inch, paint roller six inch, teflon tape, tape insulation twenty five mm steel grip, wonder tapetwo inch, antirust spray, tape transparent two inch, tape transparent one inch, dvd, envelope cloth coatedtwelve inch x sixteen inch, envelope cloth coated ten inchx fourteen inch, envelope cloth coated nine inch x twelveinch

Central Government/Public Sector

TRN :35311798 | 22 Sep, 2025

Tender Value : 0

Jorhat - Assam

Tender for gem bids for boq, alum crystal alum ferric gde i ht tape 20 mm x 25 mtrlong make- hevalls anchor kinjal batten holder deluxemake- havells anchor cona blower fan motor for watercooler 120 or 150 ltrs cap as per sample blower fan motorfor window type ac 1 point 5 tr as per sample butter flyvalue ci of size 80 mm make- zoloto kirloskar leader butter fly valve ci of size 100 mm make- zoloto kirloskarleader by metal for refrigerator 310 ltrs make- zolotokirloskar leader cabinet bulbs for refrigerator as persample cable flexible twin twisted copper conductor ofsize 23 oblique 0076 make- havells finolex polycab kei caulcium hypochlorite call bell buzzer 230 volts 50hzmake- havells anchor cona call bell ding dong make-havells anchor cona call bell switch 5 amps make-havells anchor cona ceiling fan regulator electronic 5step switch type make- havells anchor cona chiller trayfor refrigerator 300 oblique 170 oblique 165 ltrs as persample cooling coils air blower fan blads for split typeacs 1 point 5 oblique 2 tr cap as per sample changeoverswitch in ss enclosure 100 amps 415 volt 4 pole make-legrand havells abb fan capacitor 2 point 5 mfd make-anchor tubco havells fan motor capacitor 4 mfd make-anchor tubco havells fan motor capacitor 6 mfd make-anchor tubco havells float valve 25 mm make- prayagjainko prima float valve three fourth inch make- prayagjainko prima float valve 40 mm make- prayag jainkoprima float valve 50 mm make- prayag jainko prima flood light led fitting 150 watt make- wipro cromptonorient flood light led fitting 200 watt make- wiprocrompton orient flood light led fitting 250 watt make-wipro crompton orient front grill for window type ac asper sample fuse wire copper 10 or 30 amps as per sample gate light 24 watt led postop make- wipro crompton bid number gem2025b6633238 dated 09-09-2025 bid document1 96 0 0 orient, gate light 25 watt led postop make- wipro, crompton, orient, gi elbow 25 mm isi marked, gi elbowreducer 20 x 15 isi marked, gi flange 100 mm isi marked, gi flange 80mm set of 2 isi marked, gi nipple 15 mm x 150mm isi marked, gi nipple 15 mm x 25 mm long isi marked, gi nipple 15 mm x 40 mm long isi marked, gi nipple 15mm x 75 mm long isi marked, gi nipple 15 x 100 mm longisi marked, gi nipple 20 mm isi marked, gi nipple 20 mmx 50 mm isi marked, gi nipple 20 x 100mm long isi marked, gi nipple 25 mm x 100 mm isi marked, gi nipple 25 mm x150 mm isi marked, gi nipple 40 mm x 150 mm long isimarked, gi nipple 50 mm x 80 mm long isi marked, gireducer socket 1 point 5 x three fourth inch isi marked, gireducing socket 20 x 15 mm isi marked, gi reducingsocket 25 x 20 mm isi marked, gi reducer socket 1 point 5x 1inch isi marked, gi reducer socket 1 x three forth inchisi marked, gi socket 40 mm isi marked, gi socket 50 mmisi marked, gi socket reducer 2 x 1inch isi marked, gistop nut oblique end cap 25mm isi marked, gi stop nutoblique end cap 20mm isi marked, gi stop nut obliqueend cap 40mm isi marked, gi stop nut oblique end cap50mm isi marked, gi union 1 point 5 isi marked, gi union20 mm dia isi marked, gi union 20 mm, 4 inch long isimarked, gi union 25 mm isi marked, gi union 40 mm isimarked, gi union 50 mm isi marked, gi union 80 mm diamed grade isi marked, hensel cable junction box of size130x180x77 mm, high pressure gauges, ht cable joint kitcold shrinkable end joint 3 core 120 sqmm make- denson, raychem, m-seal, ht cable joint kit cold shrinkable endjoint 3 core 95 sqmm make- denson, raychem, m-seal, httape 50 mtr roll make- hevalls, anchor, kinjal, ice tray forrefrigerator 300 or 240 or 170 or 165 ltrs cap as persample, insulation tape 25 mtr long, 25 mm wide make-hevalls, anchor, kinjal, isolator 63 amps, 4 pole make-legrand, havells, abb, jute, led batten 10 watt make-wipro, crompton, orient, led bulb 12 watts make- wipro, crompton, orient, led bulb 15 watts make- wipro, crompton, orient, led bulb 7 watts make- wipro, crompton, orient, led bulb 9 watts make- wipro, crompton, orient, led fittings with rod 10 or 12 wattsmake- wipro, crompton, orient, led fittings with rod 18 or20 watts make- wipro, crompton, orient, led garden light20 watt make- wipro, crompton, orient, led lamp 7 wattmake- wipro, crompton, orient, led lamp 18 watt make-wipro, crompton, orient, led luminaire light 250w make-wipro, crompton, orient, led street light 100 watt make-wipro, crompton, orient, led street light 110 watt make-wipro, crompton, orient, led tube rod 10 or 12 wattsmake- wipro, crompton, orient, led tube rod 18 or 20watts in liue of fluorescent tube rod 36 or 40 watts 4 inchmake- wipro, crompton, orient, lime unslaked, lowpressure gauges, lp and hp cut out of ac, lugs terminal120 sqmm aluminium isi marked, lugs terminal 150 sqmmaluminium isi marked, lugs terminal 16 sqmm aluminiumisi marked, lugs terminal 25 sqmm aluminium isi marked, lugs terminal 35 sqmm aluminium isi marked, lugsterminal 50 sqmm aluminium isi marked, lugs terminal 70sqmm aluminium isi marked, lugs terminal 95 sqmmaluminium isi marked, mcb and tpn 63 amp make-legrand, havells, abb, mcb db 4 way spn, single doormake- legrand, havells, abb, mcb db 8 way spn, singledoor make- legrand, havells, abb, mcb dp 32 amps make-legrand, havells, abb, mcb sp 16 amps make- legrand, havells, abb, mcb sp 20 amps make- legrand, havells, //bid details2 / 96 abb, mcb sp 25 amps make- legrand, havells, abb, mcbsp 32 amps make- legrand, havells, abb, mcb spn obliquedp 16 amps make- legrand, havells, abb, mcb spnoblique dp 20 amps make- legrand, havells, abb, mcbspn oblique dp 25 amps make- legrand, havells, abb, mcb spn oblique dp 40 amps make- legrand, havells, abb, mcb spn oblique dp 32 amps make- legrand, havells, abb, mcb tpn 32 amps make- legrand, havells, abb, mccb 63 amps, 4 pole, 18 ka make- legrand, havells, abb, mccb 100 amps 18 ka, 4 pole make- legrand, havells, abb, mccb 100 amps tp, ac 415 volt, 50 ka make- legrand, havells, abb, mccb 100 amps, 18 ka, 3 pole 415 voltbreaking capacity make- legrand, havells, abb, mccb 100amps, 4 pole, 415 volt, breaking capacity 16 ka make-legrand, havells, abb, mccb 160 amps tpn, 415 volt, 25ka make- legrand, havells, abb, mccb 4 pole, 415 volt, 125 amps, 25 ka make- legrand, havells, abb, mccb 63amps, 18 ka, 4 pole make- legrand, havells, abb, mccb 63amps, 25 ka, 4 pole adjustable type make- legrand, havells, abb, ms nut and bolt half inch x 3 inch long isimarked, ms nut and bolt five eighth inch x 4 inch long isimarked, ms nut and bolt 5inch x 8inch isi marked, overload protectors, pig lead, plug top 5 amps make- havells, anchor, cona, plugs and sockets industrial type, pvcboard of size 4inch x 4inch isi marked, pvc board of size4inch x 7inch isi marked, pvc board of size 6inch x 8inchisi marked, pvc board of size 8inch x 10inch isi marked, pvc cable flexible twin twisted copper conductor of size40 oblique point 0076 make- havells, finolex, polycab, kei, pvc insulated and sheated aluminum cable conductor 1point 1 kv grade of size 10 sqmm, 2 core btc conformingis-694 oblique 1990 make- havells, finolex, polycab, kei, pvc insulated and unsheathed multiflexible copper cableconductor 2 point 5 sqmm, single core as per is-394oblique 1990 make- havells, finolex, polycab, kei, pvcinsulated and unsheathed multiflexible copper cableconductor 4 sqmm, single core as per is-394 oblique 1990make- havells, finolex, polycab, kei, pvc insulated andunsheathed multiflexible copper cable conductor 1 point 5sqmm single core as per is-394 oblique 1990 make-havells, finolex, polycab, kei, pvc insulated aluminiumstranded cable conductor 1.1 kv grade of size 6 sqmm, 2core conforming to is-694 oblique 1990 make- havells, finolex, polycab, kei, pvc insulated tape half inch x 25mtrs isi marked, pvc insulated tape 20 x 25 mtrs isi marked, rubber gasket 3mm thick, running capacitor 45 mfdmake- anchor, tubco, havells, sheet metal enclosure with 2pin and earth plug and socket complete with on singlephase with mcb 32a sp, single pole contractor for split, socket 5 amps, 5 pin multipurpose make- havells, anchor, cona, socket universal 15 or 16 amps multipurpose make-havells, anchor, cona, speed regulator electronic forceiling fan 5 step socket type make- havells, anchor, cona, speed regulator for ceiling fan resistant type make-havells, anchor, cona, starting capacitor 80-100 mfdmake- anchor, tubco, havells, starting relay forrefrigerator 300 or 170 or 156 ltrs cap, street light ledfittings 60watt make- wipro, crompton, surya, street lightled fittings 70watt make- wipro, crompton, surya, streetlight led fittings 90watt make- wipro, crompton, surya, switch piano type 15 or 16 amps, 1 way make- havells, anchor, cona, switch selector for window ac make-havells, anchor, cona, switch socket combination 15 ampsf t make- havells, anchor, cona, switch socket //bid details3 / 96 combination 5 or 6 amps, 2 in one ft make- havells, anchor, cona, thermostate for deep freezers isi marked, thermostate for water coolers isi marked, three pin plugtop 15 or 16 amp make- havells, anchor, cona, ledluminaire for road and street lights v2 conforming to is10322 part 5 / section 3 q3, non - modular piano typedomestic electrical switches as per is 3854 q3, ledbatten q2

corporations/Associations/Others

TRN :35273736 | 03 Oct, 2025

Tender Value : 22.61 Lacs

Narmadapuram - Madhya Pradesh

Tender for gem bids for portable water purifiers or filters, polyethylene pipes for water supply, dewatering pumps as per is 10001, reverse osmosis based water treatment system above 50 lph capacity (v2), aluminum foil wrapping rolls & sheetsis:8970, sluice valve for water works purposes (50 to 1200 mm size) (v2) as per is 14846, naphthalene (v2) as per is 539, bathroom water shower (v2), vehicle mounted air filter, alkaline water ionizer machine

Central Government/Public Sector

TRN :35252831 | 29 Sep, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for supply of shutter pannel for window of icf gs & cn coaches complete in assembled condition. the colour, shade and pattern of this material shall be as per l.p. sheet sample code no. nac-sp05 or as agreed to between the purchaser and supplier to drg. no.-crws/sk-677, alt.-2 material as per rdso/specn- c-k 513 with amendment 6 of august 2016 and corigendum-1 of june-2015..

Central Government/Public Sector

TRN :35327549 | 01 Oct, 2025

Tender Value : 0

Pune - Maharashtra

Tender for supply of non- asbestos non- metallic jointing sheet.

Central Government/Public Sector

TRN :35313061 | 27 Oct, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for supply of compressed asbestos fiber jointing sheet non-metallic 1.5/1.6mm thick sheet length 2000 mm +/- 5 %, width1500 mm +/- 5% in length and width to is:2712/1998, grade 0/1, rev.iii.

Central Government/Public Sector

TRN :35267774 | 27 Oct, 2025

Tender Value : 0

Abu Road - Rajasthan

Tender for supply of permionite jointing sheet oil treated, thickness 0.8 mm to size 1500 mm x 1650 mm, grade-o/1. is 2712:2024.

Related Searched Keywords : lp sheet

List of lp-sheet Tenders

Tender for supply of non- asbestos non- metallic jointing sheet.

Tender for supply of compressed asbestos fiber jointing sheet non-metallic 1.5/1.6mm thick sheet length 2000 mm +/- 5 %, width1500 mm +/- 5% in length and width to is:2712/1998, grade 0/1, rev.iii.

Tender for supply of permionite jointing sheet oil treated, thickness 0.8 mm to size 1500 mm x 1650 mm, grade-o/1. is 2712:2024.

Get lp sheet Tender Alert...

Related Searched Keywords : lp sheet

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us