Filters

List of indicator-tape Tenders

List of latest indicator-tape Tenders in Indian Tenders. Click on any indicator-tape Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for indicator-tape Tenders.

All-Tenders (28)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381064 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381125 | 25 Sep, 2025

Tender Value : 14.74 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35343099 | 22 Sep, 2025

Tender Value : 0

Tinsukia - Assam

Tender for gem bids for indicator light, cealing lamp 24v, ignition switch, spark plug, fuel cock assy, spark plug cap, cylinderical roller brg, rear view mirror, oil seal, fuel tank cap, carburator assy, front doorprimary seal, rear door primary seal, cross kit, grooved nut, locking plate, taper roller brg

Central Government/Public Sector

TRN :35344135 | 23 Sep, 2025

Tender Value : 0

Ahmednagar - Maharashtra

Tender for gem bids for rate, lignocaine hci ip inj 2 percent 30 ml vial bupivacaineheavy mixed with glucose solution inj 05percent plus75percent 4 ml amp cetrizine hydrochloride tab 10 mg cetrizine syrup 5 mgper5 ml 30 ml chlorpheniraminemaleate tab 4 mg atropine inj 06 mgperml 1 ml amoxycillin cap 250 mg amoxycillin cap 500 mg amoxycillin syrup 125 mg 60 ml bottle amoxycillin plusclavulanic acid dry syrup 200 mg plus 285 mgper5ml amoxycillin plus clavulanic acid tab 500 mg plus125 mg amoxycillin plus clavulanic acid inj 1000 mg plus 200 mgvial cefixime tab 200 mg ceftriaxone inj 500 mg vial ceftriaxone inj 1 gm vial cefotoxime inj 500 mg vial cefotoxime inj 1 gm vial meropenam inj 1 gm vial meropenam inj 500 mg vial doxycycline cap 100 mg gentamycine inj 40 mgperml 2 ml amikacin inj 500 mg 2ml vancomycin inj 500 mg vial ciprofloxacin tab 250 mg ciprofloxacin tab 500 mg levofloxacin iv inj 500 mg100 ml bottle linezolid inj 100 mgperml 100 ml azithromycin tab 250 mg azithromycin tab 500 mg metronidazole tab 400 mg metronidazole iv inj 500 mg100 ml bottle sy amoxycillin trihydrate 250 mg per 5 ml-bottle of 60 ml low molecular weight heparin parnaparin06 iu pfs low molecular weight heparin enoxaparin 04 iupfs metformin tab 500 mg glimiperide tab 2 mg glimiperide 1mg tab oral rehydration salt powder whoformula 205 gms sachet inj pralidoxime chloride 500 mgpam inj pralidoxime chloride 1 gm pam ondansetron tab4 mg ondansetron syrup 2 mgper5 ml 30 ml ondansetron inj 2 mgperml 2 ml amp inj levetiracetam500mg albendazole tab 400 mg albendazole susp 200mg 10 ml tab telmistrain 80mg tab telmisartan 40mg amlodepine tab 5 mg labetalol inj 20 mg 4 ml ranitidinetab 150 mg omeprazole cap 20 mg pantoprazole inj 40 bid number gem2025b6649477 dated 08-09-2025 bid document1 93 1 1 mg 10 ml vial, pantoprazole tab 40 mg, inj. paracetamoliv 1gm, 100ml, sodium hypochlorite solution 5000 ml, disp.n-95 mask, disposable scalp vein set no. 23, disp.spinal needle 23g, disp. spinal needle 25g, disposablesyringe sterile with needle 1inch 1 ml, disposable syringesterile with needle 1inch 2 ml, disposable syringe sterilewith needle 1inch 5 ml, disposable syringe sterile withneedle 1inch 10 ml, disposable insulin syringes 40iuper1ml, disposable delivery kit, disposable plastic gloves, tranexemic acid inj. 500mg, tranexemic acid tab 500 mg, dopamine inj 40 mgperml 5 ml, inj.dobutamine50mgperml-5mlampoule i.e.250mg, paradichlorobenzene plus chlorbutanol plus benzocaineplus turpentine oil ear drops 10 ml, insulin soluble plainhuman 40 iuperml 10 ml vial, premix insulin 30 70 inj 10ml, cholecalciferol granules sachet 60000 iu 1 gm, lactulose syrup 667 mgperml 100 ml, tab.ursodeoxycholic acid bp 300 mg, 75gm glucose powder, saline nasal drop 10 ml, paracetamol inj 150 mgperml 2 mlamp, paracetamol tab 500 mg, paracetamol syrup 250mg per5 ml 60 ml, diclofenac sodium inj 25 mgperml 3 mlamp, diclofenac sodium tab 50 mg, diclofenac gel 1percent 30 gm, calcium carbonate tab plus vit d3 1.25gm, syrup calcium with phosphate, injection mvi, ironsucrose inj 50 mg in 2.5ml amp parenteral iron, isoxsuprine inj 5 mgperml 2 ml, anti-d immunoglobulin injmonoperpolyclonal 300 mcg pfs, dinoprostone gel 0.5 mg, misoprostol tab 200 mcg, oxytocin inj 5 iu 1 ml, pentazocine inj 30 mg 1 ml amp, ciprofloxacin eyepereardrop 5 ml, x-ray films green base 8 x 10 packet of 100 filmagfa, budesonide resp. solution 0.5mg per 1mg, etophylin plus theophylline inj 169.4 mg plus 50.6 mg 2ml, etophylin plus theophyillin sr tab 231 mg plus 69mg, salbutamol syrup 2 mgper5ml 100 ml, coughexpectorant diphenhydramine hydrochloride 15 mg ip plusammoniumchloride 150 mg ip plus sodium citrate ip - 60mg plus menthol -1 mg ip 30mg 100 ml, inj humanalbumin 20percent, vicryl 1 nw 2347, antisnake venomserum inj 10 ml, rabies immunoglobin - anti rabies seruminj 5 ml, caffine citrate 20mg inj., syp. caffine citrate20mgperml, 3ml amp., inj. lung surfactant 5ml, sodiumchloride - normal saline 0.9percent inj. i.v. 100ml, sodiumchloride normal saline 0.9percent iv 500 ml bottle, dextrose i.v 5 percent 500 ml bottle, dextrose i.v 10percent 500 ml bottle, dextrose i.v 25 percent 100 ml, dextrose with normal saline i.v 5percent 500 ml bottle, ringer lactate i.v 500 ml bottle, mannitol inj 100 ml, water for injection 5 ml, water for injection 10 ml, sodiumbicarbonate inj 7.5 percent 10 ml, gluteraldehyde solution2 percent 5 ltr, hydrogen peroxide ip 500 ml, surgicalspirit b.p., hydrocortisone sodium succinate inj 100 mgvial, dexamethasone inj 4 mg 2 ml, absorbent cotton wool500 gm packet, adhesive plaster cotton based and 40 hypoallergic and 41 7.5 cm x 5 mtr roll, paper adhesive plaster1inch x 5 mtr roll, elastic adhesive tape 10 cm x 4 mtr roll, autoclave indicator tape, bandage cloth as per schedulef-ii than 100 cm x 20 mtr, absorbant surgical gauze 50 cmx 18 mtr, elastic crape bandage 10 cm x 2.5 mtr, folleyscatheter 2way no. 12, folleys catheter 2way no. 14, folleys catheter 2way no. 16, i.v.cannula 20g each, i.v.cannula 22g each, i.v.cannula 24g each, i.v.cannula26g each, i.v.sets with hypodermic needle 21 g of 1.5 inchlength, microdrip i.v. sets with volumetric chamber, oxygen tube with nasal prongs, plaster of paris bandages //bid details2 / 93 cm x 2.7 m rolls, rolled cotton bandage as per schedulef-ii 10 cm x 4 mtr roll, makintosh double colour waterproof rubber width-110cm in meter, surgical gloves sterileno. 6.5 pair, surgical gloves sterile no. 7 pair, surgicalgloves sterile no. 7.5 pair, urine collection bag each, steril disp. umbilical cord clamp each, generalexamination gloves, triple layer face mask, hydrogenperoxide 11 percent plus silver nitrate 1percent, piperacillinplustazobactum 4.5mg, chromic catgut size 1length 76 cm box of 12 foils, chromic catgut size 1per0length 76 cm box of 12 foils, povidone iodine ointment 5percent 15 gm, povidone iodine solution 5 percent 500 ml, clotrimazole cream 1percent 15 gm, miconazole cream2percent 15 gm, silver sulphadiazine cream 250 gm, antirabies vaccine im human tissue culture 0.5 ml, tetanustoxoid 40 adsorbed 41 i.p., rabies human monoclonalantibody r-dna origin 100iuper2.5 ml, noradrenaline inj 2mgperml 2 ml, vitamine b complex tab, vitamin aconcetrated solution 100 ml, ascorbic acid vitamin c 500mg, amino acid iv 200 ml, glucometer strips with machine

Central Government/Public Sector

TRN :35353316 | 22 Sep, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for nasopharyngeal airway 6 point 5 mmoblique 28fr, nasopharyngeal airway 7point0 mmoblique 30fr, nasopharyngeal airway 7point5 mmoblique 32fr, nasopharyngeal airways sizedash 3point0, nasopharyngeal airways sizedash 3point5, nasopharyngeal airways sizedash 4, nasopharyngealairways sizedash 4point5, nasopharyngeal airwayssizedash 5, nasopharyngeal airways sizedash 5point5, nasopharyngeal airways sizedash 6, right angled chesttube size assorted 28oblique 32oblique 36, cautery platecompatible with covidien diathermy adult, cautery platecompatible with covidien diathermy paed, e-z endobronchial blocker 7fr pack of 5, disposable cautery leadoblique pencil, class v chemical indicator for eto, bowiedick pack for steam, hme filter adult, hme filter paediatric, chemical indicator tape for eto, chemical indicator tapefor steam, enzymatic detergent solution containingbacterial protease less than 8point5 percentage per 100ml, sodium hypochlorite 5percentage, chlorhexidine solutioncontaining chlorhexidine gluconate bp 7point5percentagevoblique v cetrimide bp 15percentage woblique v 500 mlbott, lma gastro airway with cuff pilot size 4, polyamidemonofilament size 2oblique 0 70dash 80 cm 3oblique 8circle reserve cutting 40dash 45 mm

Central Government/Public Sector

TRN :35324298 | 01 Oct, 2025

Tender Value : 0

Pondicherry - Puducherry

Tender for gem bids for consumables, duraclone sc mesenchyumal tube, 25test, pbs buffer, dxflex sheath fluid 10l, 5um sterile individually packer, syringe filter, 50 filter, calcium chloride 500g, mem 500ml, 2, phospho l ascorbic acid trisodium salt 10g, humanfibronectin, ethyl alcohol 500ml, autoclave indicator tape, syringe 10ml 100perbox, sodium hypochloride 500ml, hydrogen peroxide solution 30percnt for fumigation 500ml, forceps sharp end and blunt end stainless steel, dissectionneedle, stainless steel with plastic handle, 5perpack, permanent finetip marker pen black, permanent finetipmarker pen red, long amp r hot start taq 2x mastr mix100rxn, cryo labels 1 x 0point5, mini ice bucket, 1lit

State Government

TRN :35314410 | 01 Oct, 2025

Tender Value : 0

Ahmednagar - Maharashtra

Tender for gem bids for absorbent cotton wool 100 gm absorbent cotton wool 300gm absorbent cotton wool 500 gm adhesive plaster 75cm x 5 mtr autoclave indicator tape bandage cloth 100cm x 20 mtr than absorbant surgical gauze 50 cm x 18mtr surgical blade no 11 ivsets with hypodermicneedle 21 g rolled cotton bandage 10 cm x 4 mtr rolledcotton bandage 75 cm x 4 mtr rubber makintosh doublecolour -90cm sterile disposable surgical gloves no 7 sterile disposable surgical gloves no 75 surgical rubbergloves7 surgical rubber gloves75 steril disp umbilicalcord clamp disposable scalp vein set no 23 disposablescalp vein set no 24 disposable syringes 2ml with needle21g disposable syringes 5ml with needle 21g- disposablesyringes 10 ml with needle 21g disposable insulin syringeswith needle40 iu per ml 1 ml chromic catgut size 1per0length 76 cm chromic catgut size 2-0 76cm injantisnake venum serum lyophilised asvs 10 ml injlignocaine 1percent 30 ml inj lignocaine 2percent 30 ml injlignocaine with adrenaline 30 ml inj neostigmine-1 ml tab diazepam 5 mg capomperazole 20 mg tabpantoprazole 40 mg pantoprazole inj 40 mg 10 ml vial tab domperidone 10 mg md syrup domperidone-30 ml tab ondansetron 4 mg inj ondansetron -2 ml syrupondansetron -30 ml inj promethazine 2 ml tabmetoclopramide 10 mg oral rehydration salt powder injadrenaline -1 ml tab cetrizine 10 mg syrup cetrizine-30ml tab chlorpheneramine maleate 4 mg tabparacetamol 500 mg tab paracetamol 650 mg paracetamol drops -150mgperml-15 ml sy paracetamol125 mgper5 ml 60 ml sy paracetamol 250 mgper5 ml 60ml injparacetamol 2 ml amp inj diclofenac sodium 25mgperml 3 ml amp tab diclofenac sodium 50 mg diclofenac gel 30 gm tab ibuprofen 400 mg syrup bid number gem2025b6643359 dated 10-09-2025 bid document1 121 1 1 ibuprofen-60 ml, tab. tramadol 50 mg, tab. cotrimoxazoleseptran ds trimethoprim plus sulphamethoxazole ds, tab.cotrimazole perseptranss trimethoprim plussulphametaxazole s s, syrup.septran-50 ml sy.cotrimaxazole -trimethoprim plus sulphamethoxazole susp, tab. amoxycillin d t 125 mg, cap. amoxycillin 250 mg, cap. amoxycillin 500 mg, syrup. amoxycillin 60 ml, syrup.amox plusclavulanic acid- 30 ml, tab. amoxycillin i p500 mg plus clavulanic acid i p 125 mg 625 mg, tab.amoxycillin 250 mg plus clav 125 mg 375 mg, amoxycillinplus clavulanic acid inj 250 mg plus50 mg vial, amoxycillinplus clavulanic acid inj 500mg plus 100 mg vial, tab.cefixime 200 mg, syrup cephalexin 60 ml, inj.ceftrixone 1000 mg, inj. cefatoxime 1 gm, inj.pentazocine-1 ml, inj. amikacine sulphate 500 mg, inj.gentamycin 40 mgperml 2 ml amp, i. v. ciprofloxacin 100ml, tab. ciprofloxacin 250 mg, tab. ciprofloxacin 500 mg, cappertab. doxycycline 100 mg, tab.azithromycin 250 mg, tab.azithromycin 500 mg, sy. azithromycin 100 mg per 5ml-15 ml bottle, tab. metronidazole 200 mg, tab.metronidazole 400 mg, syrup. metronidazole 60 ml, inj.benzathine penicillin 12 lac, tab. norfloxacin 400 mg, tab.tinidazole 300 mg, tab.clotrimazole vaginal pessaries 100mg, tab. flucanazole 150 mg, tab. furazolidine 100 mg, sy. furazolidine 60 ml bottle, inj. atropine sulphate 1 ml, tab. enalapril 5 mg, tab. amlodepin 2.5 mg, tab.amlodepin 5 mg, tab. atenolol 25 mg, tab. atenolol 50 mg, inj. frusemide 2 ml, tab. glibenclamide 2.5 mg, tab.glibenclamide 5 mg, tab. metformin 500 mg, tab.metformin 1000 mg, tab glimepiride 1 mg, tabglimepiride 2mg, inj.etophylline plus theophylline 2 ml, tab.salbutamol sulphate 4 mg, syrup. salbutamol 100 ml, cough expectorant 100 ml bottle, tab.phenobarbitonesodium 30 mg, tab. phenytoin sodium 100 mg, tab.acetylsalicylic acid aspirin 75 mg, inj. menadion bisulphatetrihydrate vitamin k1 -10 mgperml, inj.tetanus toxoid 0.5ml, inj.anti rabies vaccine im 0.5 ml, inj.anti rabiesvaccine 1 ml imperid, inj. iron sucrose 50 mg in 2.5mlampule, inj magnesium sulphate 2 ml amp, tabmisoprostol 200 mcg, inj. oxytocin 1 ml, inj carboprost 1ml, tab. prednisolone 5 mg, inj. hydrocortisone sodiumsuccinate 100mg, tab dexamethasone 0.5 mg, inj.dexamethasone sodium 2 ml, i. v. sodium chloride normalsaline 100 ml, i. v. sodium chloride normal saline 500 ml, i. v. dextrose 5percent i.v.d5 500 ml, i. v. dextrose 25percent i.v.d25 500 ml, i.v.dextrose with normal salinei.v.dns 500 ml, i.v.ringers lactate 500 ml, sterile waterfor injection 5 ml, inj. sodabicarbonate 7.5 mg-10 ml vial, inj.atracurium besyalte 2.5 ml, inj.dopamine 40 mgperml 5ml, syp.carbamezapine 100 ml, tab.carbamezapine 200mg, tab.diethylcarbamazine citrate tab 100 mg, tab.digoxin 0.25 mg, tab.isosorbide dinitrate 5 mg, hydrogen peroxide 500 ml, surgical spirit 500 ml, tincturebenzoin 500 ml, tab folic acid 5 mg., tab. ifa iron 60mgplus folic acid 500mcg iron plus folic acid, tab.ifairon100per 60 mg plus folic acid 500 mcg-wifs bluecoloured tablet, tab.ifa iron 45 mg plus folic acid 400mcg-sugar coated junior perpink, inj. cyanocobalamin 10ml vial, tab. calcium carbonate with vit d3, tab.spironolactone 25 mg, tab.chloroquine 250 mg, tab.clopidogrel 75 mg, cap.fluoxetine 20 mg, tab.imipramine 25 mg, syrup .calcuim with phosphate 200 ml, inj. calcium gluconate 10 ml, tab. vitamin b complex, cap. vitamin a 50000 iu, concentrated vitamin a solution //bid details2 / 121 ml bottle, tab. ascorbic acid 500 mg, oint. povidoneiodine 15 gm, povidine lodine scrub solution 500 ml, clotrimazole cream 15 gm, clotrimazole cream 30 gm, miconazole cream 30 gm, oint. framycetin 30 gm, benzylbenzoate lotion 100 ml, tr. iodine 450 ml bottle, oint.clobetesol 15 gm, ciprofloxacin eyeperear drop 5 ml, ciprofloxacin plus dexamethasone eye drops 5 ml, inj.pralidoxime chloride 500 mgper 20 ml, inj. pralidoximechloride 1gper 20 ml, inj. antiscorpion venum serum 10ml, tab hydrochlorthiazide 25 mg, tab. dicyclomine 10 mg, inj. dicyclomine - 2 ml, tab. telmisartan 40mg, tab.albendazole 40mg, syrup.albendazole 10 ml, tab.zincsulphate 20 mg dt, syrup.zinc gluconatepersuplate 60 ml, dichloronetaxinol plus terpineol soap solution 5 litre jar, sodium hypochlorite sol 200 ml, sodium hypochlorite sol5000 ml, microcuvettes for digital h.b.meter, orthotoludine soln 500 ml bott, capsule oseltamivir 30 mg, capsule oseltamivir 45 mg, capsule oseltamivir 75 mg, syp. oseltamivir 75ml bottlle, sanitization spray 100ml, 2act adult, 3 act 0-1 years, 4 act 1-4 years, 5 act 5 - 8years, cholecalciferol granules sachet 60000 iu 1 gm, 75gm glucose powder

Central Government/Public Sector

TRN :35287791 | 25 Sep, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for biological indicator rapid readout h2o2 containinga standardized viable population of bacillusstearothermophilus should have fda or isoclearance 30 pcs per box, bowie dick test packclass2 chemical indicator designed for testing airremoval efficiencyof 132 to 1340 c dynamic airremoval steam sterilizers, casp agent 1 bottle is100ml, chemical indicator class iv to verifyallparameters of plasma sterilization together i.etime temperature colour change when exposed toh2o2 should be compliant to bs en or iso 11140 1250 pcs per box, chemical indicator class v forsteam to verify parameters of steam sterilizationtime temperature steam quality should becompliant with bs en or iso 011140 1 100 per box, chemical indicator integrator for steam sterilizerclass 5 packet of 1000, chemical indicator selfadherent tape for h2o2 sterilization class i heatsensitive should not leave any adhesive residue, chemical indicator strips 250 per pack, chemicalindicator tape to monitor eto sterilization byindicating a colour change applicable to bothwarm and cool temperature cycles run at 370 c or500c should be lead free size 18mm x 55mtrs, chemical indicator to verify all parameters of etosterilizationtogether i.e time temperature colourchange when exposed to eto should be compliantto bs en or iso 11140 1 class iv480 pcs per box, etogas cartridge 40gm, flat rolls for eto orautoclave 10cm x 200mtr, flat rolls for eto orautoclave20cm x 200mtr, flat rolls for eto orautoclave 40cm x 200mtr, medical instrument lubricantnon silicon based for metal instruments 4x1 gal per case, packing paper tyvek 100 x 80mtr, ink cartridge for3 line labellar machine, packing paper tyvek 200mmx 80mtr, print papers h2o2, wrapping sheet sms35gsm 100cm x 100cm, attest autoreaderbiological indicators for plasma box of 50

State Government

TRN :35289459 | 25 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for gem bids for electrical, study of self and mutual inductance measurment trainer kit, battery charger, inverter, battery for inverter, colour coded resistances, sliding rheostats, induction coil, dc regulated power supplies, multipurpose wire stripperand cutter, combination plier insulated 8 inch, roundwire gauge, voltage or line tester, voltage or line testernon contact, tape roll, rccb 40 amps 4 pole, singlecore wire 4 sqmm roll, single core wire 2.5 sqmm roll, single core wire 1.5 sqmm roll, single core wire 1 sqmmroll, 3 phase 4 core cable 10mm square roll, 3 phase 4core xlpe cable 35mm square roll, display boarddifferent wires and cable, display board different switches, desert cooler, room heater, electric kettle, voltagestabilizers, digital megger, single phase powermeasurment kit, three phase switch fuse unit, dol starter, electric drill kit, l key set, soldering gun kit, model cutsection ceiling fan, power cable jointing kit, single phaselamp load, three phase lamp load, led street light, heavy duty power extension board, pvc casing capping, flexible pvc pipe, pvc conduit pipes, motor coil windingmachine, heat convector, electric oven, digital clip onmeter, measuring tape, screw driver mains voltage tester, trainer board to study chopper, trainer board to studydual converter, trainer board to study cycloconverter, study of mosfet trainer kit, scr based lamp intensitycontrol, parallel operation of alternator, dc series motor, single phase transformer, sepratly excited dc generator, tachometer, synchronous generator, rs flip flop, t flipflop, multiplexer and demultiplexer trainer kit, portablemoving iron voltmeter, portable moving iron ammeter, portable wattmeter, portable standard energy meter, thermocouple trainer kit, portable frequency meter, model cut section of refrigerator, cut section model of air /bid number: gem/2025/b/6640554* /dated: 05-09-2025 & & / bid document1 / 127 & & /item categoryconditioner, mercury vapor lamp kit, sodium vapor lampstudy kit, halogen lamp study kit, neon lamp study kit, compact fluorescent lamp cfl study kit, resistancewelding machine, 8085 microprocessor trainer kit, 3 corecopper cable roll, 4 core copper cable roll, 2 corealuminium cable roll, double pole mcb with box, 4 polemcb with box, led tube lights, galvanized iron wire 100mtr, nut bolt with washer, circle cable clip, heavy dutyswitch socket with gang box, thimbles, anvil 50 kg withstand, ball peen hammer 500gm, basted file 12 inch, bench type drill machine capacity 13 mm, bench vice, divider 12 inch, flat file 12 inch, flat file rough 10 inch, grinder, hand hacksaw frame, hs twist drill 5, 6.8, 8.5, 10.5, 12.5, 5 or 8, 3 or 4, pipe vice, pipe wrench 8 inch, screw driver kit, sledge hammer 5 kg, smooth file 12 inch, square face hammer 500 gm, steel foot rule 300mm, steel foot rule 600mm, steel number punch 5mm, trysquare 8 inch, vernier caliper lc 0.02mm, 150mm, acetylene cylinder, acetylene pipe 15 meter, acetyleneregulator with spanner, chipping hammer, circle cuttingmachine, edge folding machine, foot shear machine, foundry bellow, funnel stake, gaggers, gate cutters, gloves pair, hand rammer, hand stake, ladle, ladleholder, leg vice 4 inch, lifter or tong 2 in 1, millingmachine conventional, molding board, molding boxesflasks, oil fired tilting type, oxygen regulator withspanner, oxygen cylinder, oxygen pipe 15 meter, planner, pneumatic rammer, riddle, rivet set, rivet snap, round die handle, round stake, sand mix muller, scriber 8inch, shaper, sheet steel wire gauge, shovel, single snip, slick, swab, swage block 4 inch, tap wrench 5 or 16 in 1in, taper stake, tong 12 inch flat, trowel, welding screen, welding torch high pressure, welding torch low pressure, gear tooth vernier, sling psychrometerstudy of self and mutual inductance measurment trainerkit, battery charger scr based automatic 12 v, ac inputvoltage 230 v, output dc voltage 0-12 v, 0-2 amp. ratingprovided with voltmeter, ammeter of suitable range, inverter pure sine wave inverter of rating 1500 va ormore, compatible with one 12 volts battery and noiselessoperations., battery for inverter tubullar lead acidbattery min 180 ah, colour coded resistances resistancesof different values viz 5ohm, 10 ohm, 50 ohm 200 ohm, 250ohm, 500 ohm, 1000 ohm with 50 pieces each, slidingrheostats wound with evenly oxidised iron free nickelcopper wire on vitreous enamelled round steel tube.contactors should be of laminated phosphor bronze sheet, resistance tolerance ranges + 20% or 5% double tube, induction coil induction coil of 50 turns and 100 turns woundon non-magnetic material cylindrical surface with provisionto connect galvanometer., dc regulated power supplies 0-30v, 5a, dc and also with short circuit and over leadprotection with measuring devices, multipurpose wirestripper and cutter stripper should automatically adaptsitself to wires from 10 to 24 awg. capable of striping, cutting and crimping copper, aluminum, sheathed core wireand cable. handle made of thermoplastic rubber., combination plier insulated, 8 inch 8 inch combination pliersmade from high grade steel with high quality insulationsleeves., round wire gauge measuring range - 1 to 36mm, material - stainless steel, shape round, voltage/linetester 12v-220v ac/dc contact type plastic digital testerwith lcd display and neon bulb, voltage/line tester non-contact non-contact voltage tester, 12-1000v ac voltage //bid details2 / 127 detector with sound and light alarm, digital display, autopower off, capable of identifing live/null wires and locatesbreakpoints without touching wire, tape roll pvc insulationtape roll fire retardant self-extinguishing, durable, waterproof and weatherproof insulation, rccb 40 amps 4pole rccb a type 4 pole ac, residual current - 300ma, rated current - 40a, horizontal din rail mount type, singlecore wire 4 sqmm flexible single core 4 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, singlecore wire 2.5 sqmm flexible single core 2.5 sqmm copperstranded wire with 1100 v, , flame retardant, wetherresistant having minimum 90 meter wire in roll, singlecore wire 1.5 sqmm flexible single core 1.5 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, singlecore wire 1 sqmm flexible single core 1 sqmm copperstranded wire with 1100 v, , flame retardant, weatherresistant having minimum 90 meter wire in roll, 3 phase 4core cable 10mm square 10 sqmm flexible cable, having 4cores of stranded copper with current rating of minimum73 amp and voltage rating of minimum1100 volts, 3 phase4 core xlpe cable 35mm square 4 core aluminumconductor, xlpe insulated, galvanised steel strip / wirearmoured cables as per is 7098 with voltage rating of 1100volts or more and current rating of 117 amp or more, display board - different wires & cable display board withboard size 4 feet x 3 feet, having good strength, minimum12 types of wire and cables, actual components mountedright across the place with name plate., display board -different switches display board having following types ofswitches toggle, slide, push button piano key, rotary, spst, spdt, dpst, dpdt, band selector, multi-way mastermains switch and actual components mounted right acrossthe place with name plate, desert cooler desert cooler with18 gauge galvanized sheet metal body with 35l tankcapacity, 14 200w isi fan motor, honeycomb pads withstand., room heater wire wound type, 1000 watts, 230 v, 50 hz supply, electric kettle 750 watts, 230v single phaseac, 50hz, capacity 1 litre, voltage stabilizers 500 va, input170/260 volts, output 210- 240 volts automatic withvoltmeter, digital megger portable digital megger/ in testvoltage 1000v with range of 0.01m ohms to 4000 m ohms, with 0.1m ohm resolution, battery operated, hand held, single phase power measurment kit single phase 230 voltssingle phase power measurment kit with completeaccessories and operation manual and single phasesuitable load, three phase switch fuse unit surfacemounting type 415v, 100a rewireable switch fuse unitwith separate bus bar unit having 4 aluminum bus bars, dol starter 10 hp-7.5kw dol starter, operating voltage: 415v ac 3-phase, operating mode :auto / manual display :7 segment 3-digit overload range : 2 -50amp indicationat motor on by lamp start -stop by push button metalbody, electric drill kit drill capacity, 5-22 mm in concrete, 5-10 mm in steel rated voltage 235 volts, 50 hz, ac, fullload input 450 watt, full load speed 650 rpm. impact rate3270 blows/minute, l-key set hex key size: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, anti-corrosion, anti rust, soldering gun kit instant actionsoldering device trigger controlled with built in illuminationof soldering butt bakelite housing, normal power 45 watts, with approx. 2 mts supply cord suitable for electric supply of230 volt ac, single phase 50 hz. accessories: i fine bit ii //bid details3 / 127 bit for plastics, model cut section ceiling fan model cutsection of ceiling fan showing its internal parts, powercable jointing kit epoxy based cable jointing kit, singlephase lamp load portable single phase 230v, 50hz, 3kwelectrical lamp load, front panel built with high classinsulated bakelite sheet with sticker well printed circuitsand symbols, voltmeter, ammeter, on board switches tovary the load as per requirment and with wheels installedon bottom to move, three phase lamp load portable threephase 440v, 50hz, 5kw electrical lamp load, front panelbuilt with high class insulated bakelite sheet with stickerwell printed circuits and symbols, voltmeter, ammeter, onboard switches to vary the load as per requirment and withwheels installed on bottom to move, led street lightmaterial-aluminium, input voltage-90-305v, lighting type-led, ip rating-ip65, power watt - 100w , heavy dutypower extension board single phase 220v, 3 socket 15aheavy duty power extension board with surge protector and3.5 meter long 3 core pure copper wire, pvc casingcapping pvc casing and caping with 1 inch width and 12 ftlength for electric wire installation, flexible pvc pipe ltelectrical wiring flexible pipe 20 mm with 30 mtr length, pvc conduit pipes lt 32mm pvc electrical conduit pipe, 3mtr length, motor coil winding machine motor coil windingmachine, bench mounted, power driven, wire diameter 0.02to 1.2mm, lcd display, 50-6000 rpm, 0.5 hp, 230v, 50 hz, single phase ac motor,, heat convector operating on 230v, 50hz single phase power supply, 1000/ 2000w power ratingwith thermostat for temperature control, isi mark., electricoven electric oven 15l capacity with heat convection, double heating rods 1000 watts each with glass door andstainless steel body., digital clip on meter i display 3.5digits ii max. reading 1999 iii ac current resolutionaccuracy range 200 amps to 100 ma +1.25 to 5 digit 100amps to amp iv ac voltage 2000 v to 0.1 v : +1% to 5 digit1000 v to 0.1 v : + 1% to 5 digit v resistance 200 m ohmsto 0.1 ohms + 1.00% , measuring tape pocket measuringtape of steel spring return device, flexible, clearly graduatedin metric readings 2 mts long, screw driver mains voltagetester flat tip screw driver with built in new test lamptransparent plastic handle insulated block, metal pocket clipsuitable upto 400 v. ac blade 4 x 100 mm overall length180 mm, trainer board to study chopper single phase 230volts trainer board with complete accessories andoperation manual, trainer board to study dual convertersingle phase 230 volts trainer board with completeaccessories and operation manual, trainer board to studycycloconverter single phase 230 volts trainer board withcomplete accessories and operation manual, study ofmosfet trainer kit single phase 230 volts trainer boardwith complete accessories and operation manual, scrbased lamp intensity control single phase 230v, 50hztrainer board with scr-triac ac voltage controller kit withscr, triac, ac source voltage, inbuilt analog basedtriggering pulse unit, lamp load and fused protection., parallel operation of alternator 2no. 3 phase 3kva 415v, 50 hz alternators with suitable prime mover and panelhaving analog voltmeter: 03 nos analog ammeter: 03 nosanalog frequency meter: 02 nos lamp board bank forlamp method: 01 no phase sequence meter: 02 nos 3 pointdc starter: 02 nos alternator excitation unit: 02 nos fieldrheostat: 02 nos. connected externally with rpm meter, necessary switches, fuses with all terminal brought out, dc series motor dc series motor, 230 v, 3 hp, 1440 rpm //bid details4 / 127 with breaking eddy current or drum pulley arrangementand appropriate panel board and over speed safetyprecautions e.g. light shunt winding etc, single phasetransformer single phase transformer, 230/115 v, 50 hz, 3kva housed in a metal tank with all terminal brought out, three phase lamp load 4 kw three phase lamp load withmetallic housing and available with suitable mcb, switches, voltmeter and ammeter. front panel built with high classinsulated bakelite sheet with sticker well printed circuitsand symbols, sepratly excited dc generator separatelyexcited dc generator, 230 volt, 5 h.p, 1440 rpm completewith appropriate panel board with voltmeters, ammeters, switches, indicators, starter and field regulator withappropriate panel board with voltmeters, ammeters, switches, indicators, starter and field regulator and allterminal brought out, tachometer digital non-contact typetachometers 0-10, 000 rpm, 3 1/2 digit, synchronousgenerator 3 phase, 415 volt, 5 h.p., with prime mover, 110volts dc shunt generator as excitor, starter, outputterminals brought out with 3 phase 3kw lamp load, rs flipflop single phase 230v, 50hz trainer board to study rsflip flop, t flip flop single phase 230v, 50hz trainerboard to study t flip flop, multiplexer and demultiplexertrainer kit single phase 230v, 50hz trainer board with, 8:1multiplexer, 1:8 demultiplexer, 4:1 multiplexer, 1:4demultiplexer, portable moving iron voltmeter 0-300 volts, ac voltmeters portable moving iron 150 mm uniform scalewith anti parallax mirror, knife edge pointer, housed in ateak wood/ebonite case, accuracy +1.5%, portable movingiron ammeter 0-5 ampere ac ammeters portable movingiron, 150 mm uniform scale with anti parallax, mirror, knifeedge pointer, housed in a teak wood/ebonite case, accuracy+1.5%, portable moving iron ammeter 0-10 ampere acammeters portable moving iron, 150 mm uniform scale withanti parallax, mirror, knife edge pointer, housed in a teakwood/ebonite case, accuracy +1.5%, portable wattmeterportable dynamometer type, housed in teak wood/ebonitecase, scale 150 mm knife edge pointer with anti parallax, current range 0-5-10 amp voltage range 0-250-500 volt, portable standard energy meter single phase, inductiontype 50 hz, 5a/10a 250 v, portable standard energy meter3 phase, induction type, 4 wire.440 v 10 a, 50 hz., thermocouple trainer kit thermocouple trainer kit witharrangements of thermocouple sensor for copperconstantan thermocouple, oven for heating, lcd display, 2no.s thermometers suitable to measure temperature from0 c to 200 c., portable frequency meter digital, 4 digit leddisplay frequency meter suitable for use on 230 v ac mainsupply range 20-99 hz, portable frequency meter vibratingreed type 230 v, having 21 reed 40-60 hz. abs body, portable frequency meter moving coil type, portablehoused in phenolic moulded body with antiparallax mirror.scale and knife edge pointer, range 40-60 hz, 230 v, modelcut section of refrigerator model cut section of refrigeratorfor study electrical circuit of refrigirator, cut section modelof air conditioner cut section model of domestic window airconditioner to study electrical circuit of air conditioner, mercury vapor lamp kit mercury vapour lamp 120 watt, 230v, 50 hz ac supply complete with choke, lamp holderand power factor capacitor, sodium vapor lamp study kitsodium vapour lamp 120 watt/250 watt, 230 volts, 50 hzwith choke and lamp holder, halogen lamp study kit 1000watts/1500 watt, 230 v, 50 hz complete with fittings, neonlamp study kit single phase 230 volts neon lamp study kit //bid details5 / 127

Related Searched Keywords : indicator tape

List of indicator-tape Tenders

Get indicator tape Tender Alert...

Related Searched Keywords : indicator tape

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us