Filters

List of hand-set Tenders

List of latest hand-set Tenders in Indian Tenders. Click on any hand-set Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for hand-set Tenders.

All-Tenders (154)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :35376239 | 03 Oct, 2025

Tender Value : 5.00 Lacs

Aurangabad (Mh) - Maharashtra

Tender for gem bids for hard, hard brooms, soft brooms, sindhi brooms, dust bin, drycell box, rechargeable torch, torch plastic body, coirbrush, wire brush, plastic bucket, plastic mug, dustercloth, khurpee, plastic dustbin, black carry bag, bambooladder, safety belt small, safety belt big, cotton ropethick, cotton rope thin, jute rope, fiber stick, plasticwhistle, bleaching powder, special size brush, first aidbox, dust pan, door mat big, door mat small, rubber mat, floor wiper, phenyl, acid, liquid soap, hand gloves, choke up pump, sanicube, wet mop set, naphthaleneballs, odonil, harpic, wiper, hand wash dettol, hockeybrush, toilet brush, toilet plastic bucket, detergentpowder, toilet paper roll, toilet soap, mask, nylon brush, glycel, stick adhesive, koyta

Central Government/Public Sector

TRN :35378003 | 23 Sep, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for hand wash sink, camonet 4 by 9 feet, rucksack bag, borosil donga 1600 ml, bread basket, steel tart pie, borosil glass container 620 ml, trea transparent glass, crystal stainless steel serving spoon, glass waterdispenser 5 ltr, handmade crochet flower, crystal whiskyglass set of 6 pcs, non stick kadhai, non stick fry pan, kadhai, cooker 10 ltr, non stick tawa, tarkle pan, soupstrainer, prestige electric chopper, manual chopper, pulverlizer machine, kadhai with lid, patila with lid, saucepan, masala container, rice strainer, iron fry pan, ironponi, steel palta, steel poni

Central Government/Public Sector

TRN :35379038 | 22 Sep, 2025

Tender Value : 0

Guntur - Andhra Pradesh

Tender for gem bids for photo copier paper 210 mm by 297 mm a dash 4, pest sealor hit spray or aerosole spray, pencil cell 1 dot 5 v, paper napkin, paint roller 9 inch, paint roller 7 inch, paint roller 6 inch, paint roller 4 inch, paint roller 12inch, paint brush 4 inch, teflon tape, tape transparent2 inch, tape transparent 1 inch, tape insulation 25 mmsteel grip, synthetic mat red, synthetic mat green, superor spin mop refils, steel cleaning liquid, spray handliquid insecticide, spin mop set, wonder tape 2 inch, wiper long handle, varnish or touch wood, urinal screenmats, torch cell 1 dot 5 v medium size, toilet paper, telephone cable 4 core

Central Government/Public Sector

TRN :35379308 | 04 Oct, 2025

Tender Value : 8.21 Lacs

Darjeeling - West Bengal

Tender for gem bids for consumables, bid number gem2025b6646792 dated 13-09-2025 0 0 bid document1 46 0 0 2 2 clamp 4 inch heavy duty, conbextra gp2 cement, cotton cutting cloth, cutting wheel ag 4 1mm thk, cutting wheel ag 4 3mmthk, cutting wheel ag 5 1mmthk, cutting wheel ag 5 3mm thk, colgate powder100gm, d a hose pipe, dye penetrant test kit, detergent powder 1kg, duster cloth 30x30 inch, emery paper 1000grit 9x11 inch, emery paper 400grit9x11 inch, emery paper 600grit 9x11 inch, emerypaper 800grit 9x11 inch, emery paper 2000grit 9x11inch, emery roll tape grit 400 4 inch x50mtr, emeryroll tape grit 220 4 inch x50mtr, emery roll tapegrit 320 4 inchx50mtr, s.s. feeler gauge set 0.05 mmto 1 mm 18 inch long, feeler strip point 03 mm 300mmlength, feeler strip point 06 mm 300mm length, feelerstrip point 07 mm 300mm length, feeler strip point08mm 300mm length, feeler strip point 22 mm 300mmlength, grinding goggle white, grinding wheel dia 4inch, gumboot large size 8 uk, hand lamp 60 wattinsulated with cord length 10 m, holdtite 1 kgpack, hose clamp 3 heavy duty, hose clamp 2 heavyduty, imperial size o ring set, led bulb 9watt, malmal cloth white, markin cloth 1mtrx100, m-seal general purpose 250gms, nylon sling 1mtrlength 2 ton cap, nylon sling 6mtr length 2 toncap, oil stone combination, oxygen hose pipe, polypropylene rope 12mm, painting brush 2 inch, painting brush 3 inch, painting brush 4 inch, paintingroller 9 with handle, permanent marker, polystersling 2ton cap 5mtr lth, rain coat size xxl, rechargeable led torch light, rubber hand gloves, rust remover 1 ltr pack, s s wire brush, s.s shim0.02mm 300mm lth, s s shim 0.40mm 300mm lth, s sshim 0.50mm 300mm lth, s s shim 0.60mm 300mm lth, flap disc grit 60 dia 4 inch, flap disc grit 60 dia 5inch, teflon tape 1 inch, teflon tape 1 by 2, bluepaste 10g, feeler gauge set 0.05 mm to 1 mm 300mmlong, gland packing 10 mm ss wire braided., clamp1 1 by 2 inch, clamp 6 heavy duty for green flexiblehose, chalk box, cotton hand gloves standard, emery paper 1200grit 9x11 inch

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35379586 | 23 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for items, locker dg godrej, almirah steel, white board 4x3 feet, carpet, blazer cloth, comforter, bed side carpet, centrecarpet, crockery dinner set, mail bag, in out tray fibreblack, brief case large, brief case small, humam dusta, wooden tray, blinds for window large, blinds for windowsmall, induction stove bajaj, prestige plating, paint black, brush 3 inch, umbrella large, hotcase, barber chair, hairbrush, trimmer razor, powder puff, shower small, shower large, white comb, comb, ustra razor, scissor, razor, gillette, massager, towel, apron self, aproncostumer, sog tool bag, trimmer moser, fresh matic airwick machine, sofa seat cover, office table plant, waterbottle cover, tiffin, soft board 3x4, weight machine, dhobi iron, hanging wall watch, cane, commanding offrstamp, pede fan, dustbin steel, toilet brush, borosil glassmedium, wiper, pencil cell everyday, cup soucer set, fullplate, quarter plate, bowl, tea stainer, lemon crushersteel, pad lock 40mm, pad lock 50mm, pad lock 65mm, harpic, colin, dettol liquid, pocha with handle, pochalarge, dusting cloth, stamp pad, ink bottle for stam pad, white phenyol, lizol, broom swiping full jhadu, roomfreshner automatic spray air wick, room freshner, cordless bell, bedsheet, bedsheet single bed with pillowcover, pillow, bucket 20 ltr, bucket 5 ltr, mug large, mugsmall, bond paper /bid number: gem/2025/b/6680426* /dated: 13-09-2025 & & / bid document1 / 58

Central Government/Public Sector

TRN :35380620 | 23 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for itmes, multi plug, power board, wire 1.5mm copper red and black, caping casing 6 feet, plug top 5 amp, plug top 15 amp, phone m-71 black, phone line planset, power board 15amp, mcb spn, mcb cover, wire roll, nut bolt, drillmachine bosch, 15 amp board, 5 amp board, screw 3x4, screw 1 inch, screw 2 inch, bed switch, strip light 20 mtr, wire roll 2.5mm black and red, wire clamp small, wireclamp medium, bulb 0 watt red and green, holder hanger, hanging holder, electric board two switch, gatti 3x4 inch, gatti 1 inch, gatti 2 inch, wire 1.5mm, wire roll flexible, crone tool pin, jumper wire, cutting plier, nipper, longnose plier, insulation tape, rozet box, tool bag, linelead, handset lead, crimping tool, lan tester, cd, dvdrw, exter cd drive hp, wireless keyboard and mouse, screw driver set, multimeter, utp cable, extension board

corporations/Associations/Others

TRN :35381009 | 25 Sep, 2025

Tender Value : 14.68 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35381018 | 25 Sep, 2025

Tender Value : 6.97 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase star 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4.0 mm 2 pvc single core copper wire

Related Searched Keywords : hand set

List of hand-set Tenders

Get hand set Tender Alert...

Related Searched Keywords : hand set

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us