Filters

List of gi-bend Tenders

List of latest gi-bend Tenders in Indian Tenders. Click on any gi-bend Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for gi-bend Tenders.

All-Tenders (38)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35801770 | 21 Nov, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for supply of gi bend and clamp for electric pole with nut bolt for street light standard size as per attached

Central Government/Public Sector

TRN :35802377 | 19 Nov, 2025

Tender Value : 0

Leh Ladakh - Jammu And Kashmir

Tender for gem bids for mta, angle holder make havells oblique anchor or equipvalentwith isi marked batten holder havells oblique anchor bajaj bed switch make anchor oblique havells oblique legrandoblique indo asian bulk head fitting model nolhkl01160099 of havells or equivalent make in bajajoblique philips with cfl 08 watt change over 100 amp 4pole make havells oblique legrand oblique l and t changeover switch 32 amp 2 pole make havells oblique legrandoblique l and t change over switch 63 amp 4 pole makehavells oblique legrand oblique l and t mcb distributionbox 6 way double door spn 240 volts copper bus bar andneutral link earthing stud confo rming to is 13032 mcbdistribution box 8 way double door spn 240 volts copperbus bar and neutral link earthing stud conforming to is13032 mcb distribution box 12 way double door spn 240volts copper bus bar and neutral link earthing studconforming to is 13032 extension cord 6 oblique 16 ampmake havells oblique anchor flexible wire copperconductor 100m make finolex oblique plaza oblique polycaboblique havells gang box 4 way 4 switches 6 amp gangbox 6 way 6 switches 5 amp gang box 2 way 2 switches 5amp gang box 1 way 1 switches 5 amp gang box 8 way gi wire for earthing led bulb 7 oblique 8w make wiprooblique philips oblique syska led bulb 15 watt make wiprooblique philips oblique syska led bulb 20w make wiprooblique philips oblique syska led invertor rechargablebulb 10 watt with isi mark led bulk head fittings 10wmake bajaj oblique philips oblique crompton led flood andoutdoor lights ssk bln 50w make syska oblique wiprooblique oreva or equipvalent led tube light fitting1x20watt complete with all accessories internally pre wired andincluding connecting up with twin core twisted flexiblecopper conductor cable with suitable size led invertor bid number gem2025b6854424 dated 04-11-2025 bid document1 105 rechargable tube light fitting1x20 watt complete with allaccessories internally pre wired and including connecting led tube light fitting 1 x 9w oblique 10w 2 feet longcomplete with all accessories internally pre wired andincluding connecting main switch 32 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 63 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 100 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t mcb 6 amp make havells obliquel and t oblique standard oblique crompton greaves mcb10 amp make havells oblique l and t oblique standardoblique crompton greaves mcb 16 amp make havellsoblique l and t oblique standard oblique crompton greaves mcb 32 amp make havells oblique l and t obliquestandard oblique crompton greaves mcb 40 amp makehavells oblique l and t oblique standard oblique cromptongreaves mcb dp 32 amp make havells oblique l and toblique standard oblique crompton greaves mcb dp 40amp make havells oblique l and t oblique standard obliquecrompton greaves mcb dp 63 amp make havells oblique land t oblique standard oblique crompton greaves mcbtpn 40 amp make havells oblique l and t oblique standardoblique crompton greaves mcb tpn 63 amp make havellsoblique l and t oblique standard oblique crompton greaves ms screw full threaded 20mm 100pcs ms screw fullthreaded 25mm 100 pcs pendent holder make havellsoblique anchor or equipvalent with isi marked piano typeswitch 6 amp make anchor oblique havells oblique legrandoblique indo asian plastic body exhaust fan 200mmsweep with louvers make havells oblique cropmton obliquebajaj plastic body wall mounting fan sweep 300mm makehavells oblique cropmton oblique bajaj plug top 3 pin 16amp make anchor oblique havells oblique legrand obliqueindo asian plug top 3 pin 6 amp make anchor obliquehavells oblique legrand oblique indo asian pvc cable 10sqmm 2 core copper make finolex oblique plaza obliquepolycab oblique havells pvc cable 4 sqmm 2 core coppermake finolex oblique plaza oblique polycab oblique havells pvc cable 6 sqmm 2 core copper make finolex anchorhavells pvc casing caping elbow 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent casing caping double locked box type 25mm x1800mm long with all fiitings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 32mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 20mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark pvc casing capnig t feet 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent pvc casing capnig l bend 25mm dia make slite oblique pressfit oblique plaza or equivalent obliqueplaza or equivalent pvc casing capnig square box 4 x 4make s lite oblique pressfit oblique plaza or equivalentoblique plaza or equivalent pvc ceiling rose 2 oblique 3terminal make anchor oblique pressfit oblique havells pvccopper cable 1 point 5 sqmm black sc 90 mtr make finolexoblique plaza oblique polycab oblique havells pvc coppercable 1 point 5 sqmm red sc 90 mtr make finolex obliqueplaza oblique polycab oblique havells pvc copper cable bid details2 105 1 1 2.5 sqmm black sc 90 mtr make finolex oblique plazaoblique polycab oblique havells, pvc copper cable 2.5sqmm green sc 90 mtr make finolex oblique plaza obliquepolycab oblique havells, pvc copper cable 2.5 sqmm redsc make finolex oblique plaza oblique polycab obliquehavells, pvc copper cable 4 sqmm green sc 90 mtr makefinolex oblique plaza oblique polycab oblique havells, pvcswich bd 8 x 10 make havells oblique anchor, pvc switchbd 4 x 6 make havells oblique anchor, pvc tape insulation25 mm wide 9 mtr long make steelgrip oblique anchoroblique kinjal, socket 3 pin 16 amp make anchor obliquehavells oblique legrand oblique indo asian, socket 3 pin 6amp make anchor oblique havells oblique legrand obliqueindo asian, street light led 120w make philips obliquesyska oblique bajaj oblique havells, street light led 30wmake philips oblique syska oblique bajaj oblique havells, street light led 60w make philips oblique syska obliquebajaj oblique havells, sunmica bd with wooden bd 4 x 4, sunmica bd with wooden bd 4 x 6, sunmica bd withwooden bd 8 x 10, switch 15 oblique 16 amp make havellsoblique anchor oblique bajaj, switch 5 oblique 6 amp makehavells oblique anchor oblique bajaj, switch socketcombination 5 pin 16 amp with gang box make anchoroblique havells oblique legrand oblique indo asian, switchsocket combination 5 pin 6 amp with gang box makeanchor oblique havells oblique legrand oblique indo asian, smoke alarm, xlpe insulated pvc seathed heavy dutyarmoured multi core cable 6 sqmm 2 core aluminumconductor for working, xlpe insulated pvc seathed heavyduty armoured multi core cable 10 sqmm 2 core aluminumconductor for working voltage, xlpe insulated pvc seathedheavy duty armoured multi core cable 16 sqmm 2 corealuminum conductor for working voltage 1100 volt, xlpeinsulated pvc sheathed heavy duty armoured multi corecable 35 sqmm 3.5 core aluminium conductor for workingvoltage, xlpe insulated pvc sheathed heavy dutyarmoured multi core cable 50 sqmm 3.5 core aluminiumconductor for working voltage, fd water heating tank 500ltr with motor bhatti, water hammam 50 ltr, ppr socketouter dia 40 mm, silicon tape, insulation for 40mm outerdia pp r pipe pn 20 oblique sdr 63 layers of size 28mm x19mm with isi mark, insulation for 32mm outer dia pp rpipe pn 20 oblique sdr 63 layers of size 28mm x 19mmwith isi mark, glass shelf of toughned glass with chromiumplated steel frame, corner shelf of toughned glass withchromium plated steel frame, cp towel rail 600mm long20mm dia, waste pipe for wash basin, pvc s trap 75mmmake prince oblique supreme with isi marked, pvc sheetgreen, m seal 200 gm pkt make pidilite oblique fevicoloblique m seal, cp bib cock 15mm short body make ceraoblique prayag oblique polytap or equipvalent, cp bib cock20mm make cera oblique prayag oblique polytap orequipvalent, distemper, plastic emulsion paint make asiannerolac, waste pipe for urinal pot, alu tower bolt 75mmwith isi marked, looking mirror frameless of size600x450x5mm with 4mm ply baking make prayag obliquesaint gobin oblique modigaurd, puff wall panel 2900x1000mm both side white, vitreous china wash hand basinwhite flat back size 550 x 450mm long pvc connection withptmt nut 1m long pvc flexible waste pipe and bracket forholding whb, wc indian type make cera oblique hindwareoblique parryware, european wc with s feet or p feet trapconcealed of size 650 x 405 x 770mm with sheet covermake cera oblique hindware oblique parryware, vitreous //bid details3 / 105 china dry urinal bowl flat back water free odour free stainfree white colour with coupling including hdpe waste pipeand fixing accessories complete, looking mirror with pvcframe 21 x 15, hdpe water storage tank 1000 ltr 3 layermake sintex oblique polycon oblique polywell alongwith clid., hdpe water storage tank 500 ltr 3 layer make sintexoblique polycon oblique polywell alongwith clid., adhesiversolution sh make fevicol, hinges 100mm make spider withisi marked, nut bolt and washer 12mm x 4, taflon taperoll isi marked make supreme oblique omega obliqueasbestos, white cement confirming to is 8042 oblique1989 make acc oblique birla white oblique ambuja, acrylicsheet 3 feet x4 feet x3mm, bow handle oblique doorhandle make jindal oblique classic, ppgi sheet 12 feet x 3feet x 0.63mm tata oblique jindal oblique sail with isimarked, ppgi sheet 8 feet x 3 feet x 0.63mm tata obliquejindal oblique sail with isi marked, curtain rod steel, clamp for curtain, curtain ball, fire extinguisher 4.5 kg, fire extinguisher 1 kg ball type, hdpe sand bags with thinplastic inner length 630mm and width 350mm and weight80 gms minimum colour sand, kero heater batti, nailsassorted 0.5 6, paint brush 2 make spartan oblique orsonoblique laxmi, paint brush 3 make spartan oblique orsonoblique laxmi, paint red oxide make berger obliquenerolac oblique asian, plywood 6 feet x3 feet x12mm makecentury oblique duro oblique green, plywood 8 feet x4 feetx4mm make century oblique duro oblique green, plywood8 feet x4 feet x12mm make century oblique duro obliquegreen, screw full thread 1 oblique 2 75 pices, screw fullthread 1 75 pices, screw full thread 2 75 pices, screw fullthread 3 75 pices, screw full thread 4 75 pices, sliding bolt100mm with isi marked make classic, synthetic enamelpaint colour black in 20 oblique 10 ltr containers makeberger oblique nerolac oblique asian paints oblique aqualac, synthetic enamel paint colour blue in 20 oblique 10 ltrcontainers make berger oblique nerolac oblique asianpaints oblique aqualac, synthetic enamel paint colourgreen in 20 oblique 10 ltr containers make berger obliquenerolac oblique asian paints oblique aqualac, syntheticenamel paint colour white in 20 oblique 10 ltr containersmake berger oblique nerolac oblique asian paints obliqueaqualac, synthetic enamel paint colour yellow in 20oblique 10 ltr containers make berger oblique nerolacoblique asian paints oblique aqualac, cp butt hinges100mm, door hinges size 4 long medium weight steel, hydraulic door closer, peg stay, salt coarse for lighteningconductor, screw black color 1 oblique 2 feet, self tapingscrew 1 long, self taping screw 2 long, self taping screw 3long, soap dish chromium plate, steel screw 1 oblique 2size half thread isi marked 100 nos pkt, sunmica sheet 8feet x 4 feet x 3mm make shalimar, cement make ambujaoblique ultratech oblique acc, non skid ceramic tiles 300x 300mm make somany oblique kajaria oblique nitcooblique oriental oblique cera, non skid ceramic tiles 600 x600mm make somany oblique kajaria oblique nitco obliqueoriental oblique cera, angle iron 65x65x6mm thick maketata oblique sail oblique jsw, ms y pole of size65x65x6mm thick make tata oblique sail oblique jsw 8feet long, plier side cutting make taparia oblique jcboblique stanley, iron welding rod confirming to is 8142002 isi marked 3.15mm thick. 100 nos pkt, hand glovesinsulated with 2 rubber, de spanner 15 x 16 make tapariaoblique stanley oblique tata, de spanner 17 x18 maketaparia oblique stanley oblique tata, drill bits 1 oblique 8 //bid details4 / 105 in packet of 10 nos make taparia oblique bosch, drill bits 9oblique 6 in packet of 10 nos make taparia oblique bosch, drill bits metal 10 mm in pkt, drill bitt adopter 10 mmmake generic oblique bosch oblique jpt, drill bitt adopter12 mm make generic oblique bosch oblique jpt, drillingmachine portable type electrical driven make bosch obliquetiger, hacksaw blade make bosch oblique jcb, handgloves rubber, pipe wrench 14, ratchet spanner 14 x 15make vertex oblique stanley oblique tata, ratchetspanner 16 x 17 make vertex oblique stanley oblique tata, spanner ojde 14 15 make hira oblique taparia, spanner ojde 16 17 make hira oblique taparia, star bitmake generic oblique bosch oblique jpt, steel gurumala asper is code 8205, wooden gurumala as per is code 16301984, digitel clamp meter make g tech oblique flukeoblique meco, hydrometer brand ssu

Central Government/Public Sector

TRN :35787682 | 26 Nov, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for 3m surface type pvc box with plate make roma, 6msurface type pvc box with plate make roma, 6 and16a pinsocket 2m make roma, 16 20a switch, 1m make roma, 8way spn double door db mcb enclosure box with necessaryaccessories such as links busbars etc, 32a single pole ctype mcb make legrand, 32a two pole c type mcb makelegrand, 25a single pole c type mcb make legrand, 10 sqmm frls copper wire, copper wire, copper wire green, insulation tape red yellow blue black, 1heavy dutyelectrical pvc conduit pipe, 1 heavy duty electrical pvcconduit pipe, suitable gi u-clamp for 1 heavy dutyelectrical pvc conduit pipe, i pvc bend, pvc flexible hosepipe, 10 sq mm copper lugs pin type, 6 sq mm copper lugspin type

Central Government/Public Sector

TRN :35789376 | 15 Nov, 2025

Tender Value : 20.00 Lacs

Firozpur - Punjab

Tender for gem bids for plastics bib taps pillar taps angle valves and stop valves asper is 97632000 latest q3 showerr rose cp 12 inch isimarked wash basin without padestal size 550 x 400mmisi marked european water closet isi mark spindle forconcealed stop cock 15mm isi marked orissa pattern watercloset 580x440mm isi marked ball pvc for 15mm floatvalve isi marked urinal spreader cp isi marked push tap15mm cp bore for urinal isi marked half stall urinal sizevitrous china isi marked 1 piece vitrous china water closetwith monolithics flushing cistern isi marked urinal pot flatback size 465x355x265mm isi marked pvc seat and backfor chair varandah map isi marked copper sulphatepowder caustic soda for swimming pool ferric alum forswimming pool mortise door lock and handle set 200mmoblique 8 inch isi marked cpvc pipe 50mm bitumen roadpatch pack of 25kg isi marked pvc water tank triple layercylindrical type of 500ltrs capacity isi marked stainlesssteel wire mesh 4 feet wide 15mtr isi mark pvc cover forwater storage tank 500 ltr isi marked pvc water tanktriple layer cylindrical type of 1000ltrs capacity isi marked cpvc pipe 32mm pvc seat for chair dinning map isimarked cushion with cover for sofa set 100mm thick 40density of cushion size 21x22x4 inch tapestry cloth rate notless than rs 220 per mtr aluminium door handle 125mmisi marked nipple gi med wt 15mm x 50mm isi marked stainless steel wire mesh 35 feet wide 15mtr isi marked glass panes clear sheet 1200x 900mm x 5mm isi marked continous piano hinges 30mm cpvc pipe 15mm cabinetmirror pvc size 450 x 600mm ptmt isi marked self closinghinges 100mm self closing hinges 75mm cpvc pipe20mm dressing table mirror wooden frame size1570x690mm isi marked cpvc 15mm male brassthreaded adapter gi pipe 20mm isi marked aluminium bid number gem2025b6852881 dated 04-11-2025 bid document1 82 1 1 plain sheet 22 gauge 4 feet wide isi marked, glass panesclear sheet 1200x 900mm x 8mm isi marked, cpvc 15mmbrass tee, bend gi with socket 20mm isi marked, aluminium door handle 100mm isi marked, gi tank nipple20mm isi marked, bend gi with socket 15mm isi marked, union gi 15mm isi marked, gi tank nipple 15mm isimarked, gi pipe med gde 15mm isi marked, flush tankvessel washer 32mm, cpvc 15mm female brass threadedadapter, butt hinges alumn pressed 100mm isi marked, bracket ss for 20mm curtain rod isi marked, union gi40mm isi marked, helical door spring closer ms 150mm isimarked, ss curtain rod 20mm dia isi marked, tee equalgi 15mm isi marked, polish sealed in 1 ltr container isimarked, aluminium anodised slidding bolt 250mm withstapple complete isi marked, wall mixer brass leg 15mm, cpvc 32mm brass elbow, elbow gi redg 15x20mm isimarked, cp bib tap handle, wire mesh beading size 15x12mm, magnetic catcher, socket gi redg 25x20mm isimarked, plug gi 32mm isi marked, tee equal gi 40mm isimarked, paint smoke grey in 1 ltr container isi mark, paintwhite in 1 ltr container isi mark, paint black in 1 ltrcontainer isi mark, aluminium tower bolt 150mm withstapple isi mark, aluminium door stopper double leg isimarked, ptmt tower bolt 200mm isi marked, socket gi15mm isi marked, thinner isi marked, fevicol sh isimarked, ptmt hinges 100mm isi marked, aluminium doorstopper single leg isi marked, socket gi redg 20 x 15mmisi marked, cpvc 15mm brass elbow, glass panes clearsheet 1200 x 900 x 4mm isi marked, butt hinges alumnpressed 75mm isi marked, cushion for dressing stool350mm x 350mm x 75mm, cpvc 20mm brass tee, nipplegi size 25mm x 150mm isi marked, nipple gi size 20mm x50mm isi marked, touch wood isi marked, tarpentine oilisi marked, softwood scantling 3 inch x 4 inch, cpvc32mm brass tee, cpvc 20mm brass elbow, nail wire25mm long isi marked, nail wire 40mm long isi marked, nail wire 50mm long isi marked, multi trap 110mm, aluminium tower bolt 200mm with stapple isi mark, ptmthandle 125mm isi marked, tee gi reducing 20x20x15mmisi marked, aluminium tower bolt 100mm with stapple isimark, polish melamine in one ltr container isi marked, padlock brass 7 levers comma 65mm comma 4 keys isi marked, hardwood cupboard beading 20mm x 6mm, stainlesssteel screw full thread 35mm isi marked 50 nos each pkt, stainless steel screw full thread 25mm isi marked 50 noseach pkt, pvc bend 110mm isi marked, m seal isi marked, fine sand, aggregate 12.5mm, pvc 110mm dia rwp pi 6mtr long isi marked, cpvc 15mm tank adapter, pvcsocket 110mm isi marked, cpvc 15mm union, aluminumanodise hydrolic door closure regulated desination number02 weight between 36 to 60 kg isi mark, teak woodbeading 20 x 4mm width 6 feet long, cement ppc grade 4350 kg pack, pvc board 8x4 feet x 18mm isi marked, pvcsocket 75mm isi marked, teak wood beading 25x4mm x 6feet long, teak wood beading 1.5 inch x 4mm x 6 feet long, ms wood screw 50mm isi marked 100 nos each pkt, pvcbend 75mm isi marked, plug gi 25mm isi marked, plug gi20mm isi marked, paint brush 2 inch isi marked, pvc75mm dia rwp pi 6 mtr long isi marked, epdm rubberbeading for alumnium window and door isi marked, wallputty isi marked, paint brush 1 inch isi marked, paintbrush 1.5 inch isi marked, pvc board 8x4 feet x 12mm isimarked, screw black cross 1 inch isi marked 100 nos eachpkt, glass putty, cement white 1 kg pack, nut and bolt

Central Government/Public Sector

TRN :35772314 | 24 Nov, 2025

Tender Value : 0

Jamnagar - Gujarat

Tender for gem bids for mcb - miniature circuit - breakers for a.c. operation as peris / iec 60898 part 1 q2, copper alloy gate valve forwaterworks purpose as per is 778 q3, modular pianotype domestic electrical switches as per is 3854 q3, giclamps for 75 or 80mm tubing, gi plug 40mm, gi plug50mm, sluice valve 100mm, sluice valve 200mm, sluicevalve 80mm, gi nipple 50x150mm, sluice valve 150mm, gi tee reducing 50x25mm, gi tee reducing 50x50x15mm, gi socket screwed 40mm, gi tee equal gi 40mm, gi teeequal gi 50mm, gi union socket 50mm, gi nipple40x150mm, gi plug 25mm, gi socket screwed 50mm, copper sulphate, gi nipple 25mm, gi reducer socket40x25mm, gi bend 90 deg 25mm, gi reducer socket40x15mm, gi bend 90 deg 20mm, gi elbow screwed40mm, gi socket 25mm, gi union 40mm, gi elbow 25mm, gi union 25mm, alum commercial, gi tubing 100 mm, gi tubing 40mm, gi tubing 80 mm, gi tubing 25mm, gitubing 50mm, alum crystall, calcium hypochlorite, gielbow 15mm, gi elbow 20mm, gi nipple 15x100 mm long, gi nipple 20x100 mm long, gi nipple 20x150 mm long, ginipple 20x75 mm long, gi nipple 25x75 mm long, gi plug15mm, gi plug 20mm, gi bend 90 deg 15mm, gi claimps20mm dia tubing, gi elbow reducing 20x15mm, gi elbowreducing 25x15mm, gi elbow reducing 25x20mm, gisocket 15 mm, gi socket reducing 20 x 15 mm, gi socketreducing 25 x 20 mm, gi socket reducing 25x 15 mm, gisocket 20 mm, gi tee equal 15 mm, gi tees equal 20 mm, gi tubing 15 mm, gi tubing 20 mm, astronomical timeswitch based on lux level, bell ding dong call bell, cablelugs alumn 120 sqmm, cable lugs alumn 150 sqmm, cable lugs alumn 185 sqmm, cable lugs alumn 25 sqmm, cable lugs alumn 35 sqmm, cable lugs alumn 50 sqmm, cable lugs alumn 70 sqmm, cable lugs alumn 95 sqmm, pvc tape adhesive 20 mm x 25 mtr, pvc tape adhesive 25mm, pvc tape adhesive 35 mm, led 7 watt bulb 6500k

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35763699 | 10 Nov, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for black paint, yellow paint, orange paint, white paint, redpaint, turpentine paint, paint brush bracket 3p, paintbrush bracket 2p, paint brush 12 no, paint brush 6 no, emery paper bracket 220 no, golden paint, silver paint, green paint, brown paint, white cement powder, gardenwater pipe 200 ft, snowcem paint, terracotta, flex kwick, white cement, copper cable, wire 1 point 5 mm 90 mtr, 1 inch pipe di plast, 1 inch bend, tape roll big, casingcaping pv 3 oblique 4 10 feet, pvc saddle 1 inch, pvc wallplug oblique gitti 32 mm, foxtall palm, seasonal flowerplants, marble and granite cleaning and polishing, nameplates coloring

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

Central Government/Public Sector

TRN :35765733 | 14 Nov, 2025

Tender Value : 7.99 Lacs

Belgaum - Karnataka

Tender for gem bids for patch cord 2 mtrs bracket lc to lc connector bracket, patch cord 2 mtrs bracketsc e2k bracket, patch cord 2 mtrsbracket e2k to e2k bracket, patch cord 2 mtrs bracket e2kto lc connector bracket, ip bottle, ofc joint closer, splicing paper, pipe gi 3 inch, ac 1.5 ton, mcv tripper 16amp, io box with female rj 45 connector, rj 45 connector100 per pkt, lan switch 8 port unmanned, lan switch 16port unmanned, lan switch 24 port unmanned, rack ubracket junction box bracket, crimping tool, casing obliquecapping 3 inch x 3 inch, casing oblique capping 1 inch x1inch, l bend 3 inch x 3 inch, corner bend 3 inch, threeway 3 inch, l bend 1 inch x 1 inch, corner bend 1 inch, strait cover 1 inch, three way 1 inch, screw 1 inch, gitti 1inch, utp cable cat 6 bracket 305 mtrs bracket, earthing, sitc incl manpower support and installation

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Related Searched Keywords : gi bend

List of gi-bend Tenders

Tender for supply of gi bend and clamp for electric pole with nut bolt for street light standard size as per attached

Get gi bend Tender Alert...

Related Searched Keywords : gi bend

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us