Filters

List of electrical-network Tenders

List of latest electrical-network Tenders in Indian Tenders. Click on any electrical-network Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for electrical-network Tenders.

All-Tenders (17)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49053205 | 15 May, 2025

Tender Value : 5.56 Lacs

Simdega - Jharkhand

Tender for tender for construction of high yield drilled tube well (hydt) with supply & installation of electrical submersible motor pump set 1.5 hp with rising pipe line upto existing water tank, distribution network with stand post etc. phe work at kasturba gandhi balika vidhyalaya, bolba.

Central Government/Public Sector

TRN :49054062 | 16 May, 2025

Tender Value : 1.94 Lacs

Delhi - Delhi

Tender for repair and maintenance damaged 33 kv cable and electrical breakdown including fault detection, localization, rectification underground cable network at butchery near asc kirby place shekhwati ckt no 2 from nariana 220 kv grid to shekhwati grid under

Central Government/Public Sector

TRN :49054604 | 13 Jun, 2025

Tender Value : 70.50 Crore

Kochi - Goa

Tender for tender for provision of cgsd (kochi) at willingdon island, kochi; 1 schedule a part - i (building & structure works)details of prepriced schedule is given in tender documents. 2 schedule a part-ii ( site clearence/development & earth works) details of prepriced schedule is given in tender documents. 3 schedule a part-iii (internal water supply) details of prepriced schedule is given in tender documents. 4 schedule a part-iv (internal electrification) details of prepriced schedule is given in tender documents. 5 schedule a part-v (fire fighting)details of prepriced schedule is given in tender documents. 6 schedule a part-vi (road/path/ hard standing/culvert)details of prepriced schedule is given in tender documents. 7 schedule a part-vii (external water supply) details of prepriced schedule is given in tender documents. 8 schedule a part-viii (external electrification) details of prepriced schedule is given in tender documents. 9 schedule a part-ix (sewage disposal) details of prepriced schedule is given in tender documents. 10 schedule a part-x (area drainage) details of prepriced schedule is given in tender documents. 11 schedule a part-xi (compound wall) details of prepriced schedule is given in tender documents. 12 schedule a part-xii (organic waste converter and smart energy meter) details of prepriced schedule is given in tender documents. 13 schedule a part -xiii (miscellanious items) note:- this schedule is not pre-priced by mes and the pre-priced rate indicated as rs 0.00 under col. e signifies this fact only. 14 internal water supply s & f for 15 mm dia bore cp two way bib cock with cp wall flange (make : jaquar model no. opp15041pm / eqvlt in kohler/grohe), cast copper alloy, screwed down high pressure with crutch screwed both ends for cpvc pipes or for union and fixed complete all as specified and directed by engr-in-charge. 15 s & f for 15 mm dia bore cp bib cock with cp wall flange (make : jaquar model no. opp15037pm / eqvlt in kohler/grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for cpvc pipes or for union and fixed complete all as specified and directed by engr-in-charge. 16 s & f for 20 mm bore concealed stop cock reqular brass body with spindle extnwith exposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange (compatible with ald-083cqt & ald-089cqt)(make : jaquar model no. ald 089 cqt/ eqvlt in kohler/grohe), cast copper alloy, screwed down high pressure with crutch , screwed both ends for cpvc pipes or for union and fixed complete all as specified and directed by engr-in-charge. 17 s & f for 25 mm dia bore concealed stop cock reqular brass body with spindle extn with flush cock & wall flange 25mm ceramic disc cartridge) with plain knob (make : jaquar model no. ald 081/ eqvlt in kohler/grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for cpvc pipes or for union and fixed complete all as specified and directed by engr-in-charge. 18 s & f 20mm bore cp angular stop cock with cp wall flange (make : jaquar model no. cqt 23053 / eqvlt in kohler/grohe), cast copper alloy, screwed down, high pressure with crutch, screwed both ends for iron pipe or for union and fixed 19 s & f for 100 mm overhead shower rose round shape single flow (abs body chrome plated with gray face plate (make : jaquar model no. 1989 with sha 479l300s / eqvlt in kohler/ ess ess) with shower arm ø20mm & 300mm long round shape with 90° bend for wall mounted showers with stainless steel connected to pipe complete all as specified and directed by engr-in-charge. 20 cooling appliancesdesign, supply, installation, testing and commissioning of invertor type floor mounted packaged ac units of specified capacities, combination of energy efficient inverter compressor plus fixed compressors, nominal capacity condensing unit with all standard fittings, safety devices, like hp/lp cutout, single phase preventor, overload relays, r-410a gas, vibration isolation pads etc. suitable to work till 50 deg ambient, blue fin condensor and corrosion resistant body, wide voltage range 360v - 440v, the quoted rate shall include group controller also asrequired for controlling ac from a single point and timer option for load sharing of ac units complete all as specified and as directed by engineer - in - charge, of following capacities.note: design report shall be submitted before execution of work at site by the contractor to ge for his scruitiny/comments and further submitted to ao for his approval.make: blue star/daikin/haeir/godrej/voltas/equivalent. (high side (machines))(outdoor unit) 21 a) 22 tr inverter package ac units 22 b) 16.5 tr inverter package ac unit 23 design, supply, installation, testing and commissioning of normal type floor mounted packaged ac units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like hp/lp cutout, single phase preventor, overload relays, r-410a gas, vibration isolation pads etc. suitable to work till 50 deg ambient, blue fin condensor and corrosion resistant body, wide voltage range 360v - 440v, the quoted rate shall include support works for outdoor units with necessary catwalk for service access complete all as specified and as directed by engineer - in - charge, of following capacitiesnote: design report shall be submitted before execution of work at site by the contractor to ge for his scruitiny/comments and further submitted to ao for his approval.make: blue star/daikin/haeir/godrej/voltas/equivalent. low side (machines))(indoor unit) 24 a) 22 tr inverter package ac units 25 b) 16.5 tr inverter package ac unit 26 supply, installation and testing of refrigerant pipingwith necessary clamping (suction & discharge) hard/soft drawn copper tube of suitable sizes, with copper elbows, tees, tubular nitrile insulations etc as required complete all as specified and as directed by engineer - in - charge. 27 s & f control cabling b/w indoor & outdoor units 28 m & l refrigerant gas - r410a 29 supply, installation and testing of hard pvc drain piping. drain piping with tubular nitrile rubber insulation: complete in all respects, well clamped till drain points complete all as specified and as directed by engineer - in - charge. for all units 30 ductingsupply, fabrication, installation, testing of gi rectangular ducts, complete with all fittings such as tee, bends, special off shoots, inspection doors, transformation pieces etc. as required as per is 655 including suspension and supporting arrangement for plenum, duct etc. required complete all as specified and as directed by engineer - in - charge. 31 a) using 0.63 mm (24 gauge) gi sheet 32 b) using 0.80 mm (22 gauge) gi sheet 33 c) using 1.00 mm (20 gauge) gi sheet 34 duct insulation & liningsupply and installation of acoustic insulation of ducts using 9mm open cell nitrile rubber, well adhesived, 150 - 180 kg/cm2 complete all as specified and as directed by engineer - in - charge. 35 supply, installation & testing of thermal insulation of ducts using 9mm closed cell nitrile rubber, well adhesived, 40-60 kg/cm2 complete all as specified and as directed by engineer - in - charge. 36 s & f canvas connection 37 air distribution productssupply and fixing of powder coated aluminium grills/ diffusers (supply/ return) complete all as specified and as directed by engineer - in - charge. 38 s & f collar dampers 39 supply and installation of fire dampers complete all as specified and as directed by engineer - in - charge. 40 supply, installation, testing and commissioning of heater bank plus humidistat arrangement complete all as specified and as directed by engineer - in - charge. 41 supply and fixing, testing and commissioning water coolerhaving stainless steel body with inbuild purifier hima 7 nhc, dispencing capacity 125 ltr/hr and storage tank capacity 40 ltr normal and 40 cold electric driven (single phase), 230 volt, ac power supply with all connecting accessories complete all as specified and directed. 42 supply and fixrefrigerator, electric driven (single phase), 220 v,50 hz, capacity 195 litres, 3 star rated direct cool inverter, single door all as specified and directed by the engineer-in-charge. 43 supply and install, testing and commissioning of split type air conditioner 1.5 tr capacity of invertertechnology 5 star rating with cordless remote control single phase 240 volts complete with all accessories such as indoor and outdoor units and refrigerent tubing of adequete length as required at site indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables, etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed (cooling appliances- qty 4, air conditioning- qty 10) 44 supply and fix voltage stabilizer 3 kva for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 v to 280 v with output voltage stabilized at 230 v with accuracy of ± 2.5% 45 supply and fix voltage stabilizer 4 kva for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 v to 280 v with output voltage stabilized at 230 v with accuracy of ± 2.5% (cooling appliances-qty4, air conditioning- qty 10) 46 air conditioningsupply and install,testing & commissioning of split type air conditioner 2 tr capacity of inverter technology 5 star ratingwith cordless remote control, single phase 240 volts complete with all accessories such asindoor and outdoor units and refrigerent tubing of adequete length as required at site, indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables etc and making good the surace by matching with adjoining surface complete all as specified and directed. 47 supply and fix voltage stabilizer 5 kva for automatic operation,single phase naturally air cooled indoor type, wall mounted type & designed for input variation between 170 v to 280 v with output voltage stabilized at230 v with accuracy of ± 2.5% 48 internal electrifications & f led mirror light 1 x 5w lumos ecco 1 feet make: luker or equivalent 49 s & f modular mcb dbox 3 pin socket with mcb sp 20 amp, 240 v including plastic enclosure as per manufacturer instruction fixed on wall surface complete for air conditioner all as specified and as directed. (make:-havells, model-dhdmcsn0251016 or equivalent) 50 supply and fix air circulator of 600 mm sweep ac single phase. 230v, 1440 rpm complete all as specified and as directed. (make: havells model, turbo force wall or equivalent) 51 s & fvertical triple pole & neutral (vtpn), double door, 16-way metallic modular distribution board conforming to iec 61439-3, suitable for flush / surface mounting with provision for fpmccb as incomer and tpn/sp mcbs as outgoing, reversible metal door, 200 a copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having ik 09 & ip 43 protection complete all as specified and directed. 52 s & fvertical triple pole & neutral (vtpn), double door, 4-way metallic modular distribution board conforming to iec 61439-3, suitable for flush / surface mounting with provision for fpmccb as incomer and tpn/sp mcbs as outgoing, reversible metal door, 200 a copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having ik 09 & ip 43 protection complete all as specified and directed. 53 m & l for flame proofmcb distribution board spn 12 way, with case iron body, powder painted, with 200 amps rated bus bar etc. including provision of one 32 amps spn mcb as incoming and 6 amps sp mcb -10 nos as outgoingcomplete all as specified and as directed. 54 m & l for flame proofmcb distribution board spn 8 way, with case iron body, powder painted, with 200 amps rated bus bar etc. including provision of one 32 amps spn mcb as incoming and 6 amps sp mcb- 6 nos as outgoingcomplete all as specified and as directed. 55 supply and fix engage light with green & red led complete all as specified and as directed 56 supply and fix of cs mounted high intensity led search light, long range, manually swivel in all direction, 250 w, minimum range 700 meters, single, led efficiency> 140 lm/w, pf> 0.95, cct 5500k - 6500k, optical grade pmma/pc lens/reflector efficiency>95%, multiple circuit to avoid complete run down, anti uv, narrow beam 5 degree, die cast lm6 body with air fins, powder coated, constant current, an average lux at 10 meter - 8000 lux with circle of approx 600 mm, working temp: -20 to +60 degree c, input volt 100-300 vac, 50 hz, pf >0.95, ip-66, confirming to lm79/ lm80 and type tested as per is: 10322/ is: 13383, bis approved and govt lab tested for lux intensity. the search light is completed with manual revolving cs stand d20cm x h15cm (min.) with 3 nos. foundation holes for mounting of searchlight on watchtower structure, manual rotation of light on horizontally 360 degree with 45 degree tiltable with provision of both instant locking arrangement at desired position. model no. cs-lrfll-25pc25 of kalin make or equivalent 57 supply, install, testing and commisisong of outdoor floor/wall mounted thermoplastic polycarbonatefeeder pillar panel, enystar emptyenclosures, ip-65, weatherproof, corrosion free, halogen and silicon free, frame retardant with opaque lid size-[276 x 546 x 186]mm and transparent hinged lid, completed all as specified and directed. 58 m & l for tv socket module metal flushed including flushed box cover plate box for 2 way module complete all as specified. 59 m & l for telephone jack with module metal flushed including flushed box cover plate box for 2 way module complete all as specified. 60 supply and lay coaxial cable for tv cabledrawn through conduit 61 s & f flame proof exhaust fan 300 mm sweep, single phase, 1440 rpm complete all as specified and as directed. 62 fire fightingsupply and fix foot valve conforming to is 4038, 100 mmdia. 63 supply and fix foot valve conforming to is 4038, 150 mmdia. 64 supply and fix cast iron air valves with single air outlets, conforming to is 14845 of size 100 mm dia bore and fixing up in cast iron water supply mains of size 100 mm dia. 65 s & f sprinkler flexible drop pipe 1 mtr long. 66 s & f sprinkler rossette 25 mm dia. 67 supply and installation, testing and commissioning of analog addressable type active loop repeater (loop power/external power) fire terminal with inbuit turbo isolator, backlit lcd display 6x40 characters display, having controls for reset, mute, accept, silence alarms and self test, with programmable free keys and duly approved byen54/lpcb/vds/fm make: siemens/notifier/bosch 68 m & l for low smoke zero helogen flame retardent fire alarm cable2 core, 1.5 mm² copper conductor confirming to bs7629-i, bs6387 & rated for 500 v grade having plaine sraded copper coductutor with priming insulation of glass mica fire resistance tape & secondery insulation of high performancesilicon rubber with electrostatic screen of aluminium fire barrier type lt53 outer sheath confirming to bs 7655, red in colour drawn through & including concealed steel conduit including laying,fixing,connecting complete all as specified and directed. 69 staircase signage down of make bajaj cat part no. 111499 model no. dsdwbb 3w double side display for staircase downwards (with 2 hours built in battery backup) complete all as specified and directed at site complete all as specified and directed. 70 s & f wall mounted led emergency exit signage luminaire lit up using regular mains supply comes with a unique rechargeable ni-cd battery capable of emergency back up upto 05 hours(cat no. 220211 make bajaj or equivalent to cg/havells. 71 supply, installation, test and commissioning cpri approved factoryfabricated, indoor type, lt panel board , made out of 2 mm thick crca sheetsingle door withboth side opening including neoprene rubber gasket, suitable for 440 volt 3 phase 4 wire system, including danger plate, earthing strip point and ventilation louvers at rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. and embeddedwith 50x50x6mm mild steel angle iron frame and 750 mm above the normal ground level complete withinternal connection with suitable size of cable, cable lugs and cable glandspcc foundation in cement concrete 1:3:6 (20 mm graded stone aggregate) and testing after installation includingcomplete all as specified and comprising of the following:- make of mccb/mcb -mds/legrand/l&t/hegger (main fire fighting panel)incoming(i) mccb 4 pole 160 amp 50 hz, 415 v with reputing capacity 35 ka with microprocessor based release - 01 no.(ii) voltmeter digital type 0-500 volts range flush type with selector switch- 01 no(iii) aluminium bus bar tpn - 200 amps- 1setoutgoing(i) mccb 3 pole 125 amp 50 hz, 415 v with reputing capacity 35 ka with microprocessor based release- 01 no.(iii) mcb tpn 32 amp -02 nos(iv) 80 hp s/d starter- 01 nos(v) dol starter 7.5 hp- 01 nos(vi) motor protection relay32-88 amps- 1 no. (vii) motor protection relay2-5.5 amps- 1 no. (viii) on/off/trip indication lamps, 220 v ac- 6 nos.(ix) start/stop push button, 2 no. (x) phase indicating lamps ryb for incoming and each outgoing connection.(xi) digital type ammeter 0- 150 amps with selector switch and ct coils of suitable capacity for incoming and each outgoing connection- 1 no. 72 m & l for coating and wrapping of under ground steel pipe buried in soil shall have protection against corrosion as per is-10221.the coating and wrapping shall be carried out in systamatic manner to get uniform thickness of coating as per is specification 73 supply, installation, test and commissioning cpri approved factoryfabricated, indoor type, lt panel board, made out of 2 mm thick crca sheetsingle door withboth side opening including neoprene rubber gasket, suitable for 440 volt 3 phase 4 wire system, including danger plate, earthing strip point and ventilation louvers at rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. and embeddedwith 50x50x6mm mild steel angle iron frame and 750 mm above the normal ground level complete withinternal connection with suitable size of cable, cable lugs and cable glandspcc foundation in cement concrete 1:3:6 (20 mm graded stone aggregate) and testing after installation includingcomplete all as specified and & directedby engr-in-charge comprising of the following :– ( booster terrace pump panel)incoming:-(a) incoming mccb 40 a 25 ka, 4 pole- 01 no.(b) busbar tpn of size 100 apms - 1 setoutgoings:-(a) mcb 3 pole tpn 32 amps,10 ka-2 nos.(b)dol starter for 7.5 hp pump set-1 nos.(c) ammeter class-1, digital panel mounting type 96mmx96mm l & t cat no wds301fca00 including ct 50x5 amps 3 nos & selector switch-4 nos(d) voltmeter class- 1, digital panel mounting type 96mmx96mm l&t cat no.wds301fev00 & selector switch - 1 no.(e) led type indicator lamp 1 set (set of three for r,y,b)(f) mini protecrionrelay 4-11 amp - 1 nos. 74 fire extinguisher mechanical foam type trolly mouted of 9 liters capacity. ceasefire 9 litrs fire extinguisher afff foam type, external cartridge type, pressure guage gross weight 14.6 kg, empty weight5.6 kg, can height 611 mm, diameter 175 mm, discharge time less than 60 secs controllable discharge mechanism, minimum 6 mtrs, applicable on class a, b, can construction deep down & co2 mig welded valve construction: forging & machining, internal coating of can: epoxy powder coating, external coating of can: epoxy poyster powder coating sheet metal thickness 2.0mm,1 year warranty. make cease fire or equivalent. (pol store) 75 supply, installation,testing & commissioning of carbon dioxide (co2) type fire extinguisher of 4.5 kg confirm to is: 15683, with isi marked/tac approved fitted with required accessories including wall suspension brackets. 76 supply, installation,testing & commissioning ofdry chemical powder (abc) stored pressure type fire extinguisher of 9 kg confirm to is: 15683, with isi marked/tac approved fitted with required accessories including wall suspension brackets. 77 supply, installation,testing & commissioning of water mist high pressure stored pressure type fire extinguisher of 9 kg confirm to is: 15683, with isi marked/tac approved fitted with required accessories including wall suspension brackets. 78 supply and installation at approved location approved make fire sand bucket of 24 gauge galvanized steel sheet, each set shall have 4 buckets with stand & showel etc, complete. 79 special equipments for storesdesign, manufacture, supply, installation, testing and commissioning of automated storage and retrieval system with storage racks, pallets, stacking crane, computer hardware with compatible inventory software as a turnkey solution complete all as specified and directed. automated storage and retrieval system shall consist of computer controlled & plc stacker crane driven system for automatically placing & retrieving materials from defined storage locations. the crane shall be capable of lifiting, stacking and retriveing the pallet loads weight upto 1125 kg (max) complete all as specified and directed by the engineer-in-charge. technical data for design of heavy duty asrs:-(a) dimensions:-height:10 mtrs for racking system which shall be designed and constructed to store the required no. and size of pallets.(b)storage capacity:-pallet size: 1300 (w) x 1200(d) x 1250 (h) in mmpallet nos.: 480pallet load capacity: 1125 kgtotal capacity: 540 tons(c) stacker crane: single mast automated stacker crane for handling pallet, size 1300mm(w) x 1200mm (d) x 1250mm (h) and pay load (including pallet self weight) of 1125 kg max. the stacker crane shall be capable of picking up the pallet from in-feed conveyor or loading station and stacking it into empty slots of racking system. similarly, it shall also be capable of retrieving the palltet from racking system and putting it on the same conveyor or unloading station. stacker crane will be mounted on single rail at the bottom to traverse the length of the storage system. a single top rail mounted on the racking system shall also support it.general technical parameters of stacker crane:technical parameters/type- single mast(i) operation mode (networking)- on-line automatic / single automatic (ground/boarding) /manual operation (boarding) / maintenance (ii) communication means- wireless 80 (iii) power supply mode- 380 to 415 v, 50 hz, three phase five wire (iv) addressing mode- horizontal and verticle operation: photo electrical sensor + bar code scanners(v) positioning / reduction accuracy (mm) level- lifting ± 3 - 5, fork : ± 3(vi) fork unit- 1 double deep fork(vii) load unit- ms pallet (viii) total height- 10 mtr(ix) the normal lifting speed (m/min) - 10 mpm(x) the normal running speed (m/min) - 65 mpm(xi) rated load- 1125 kg(xii) receipt equipment fixed platform/conveyor/lifting /platform(electric/manual)- conveyor(d) pallets: to stack and retrieve the pallet weighing up to loaded pallet weight 1125 kg at height up to the last loading level in the racking system. it should have retrieval mechanism to enable stacking & retrieval of pallet from either side of the rack and also to pick up the load directly from the loading station.pallet details:-(i) dimensions - 1300mm(w) x 1200mm(d)(ii) pallet height- 1250 mm(e) racking system :- two aisle having two row racking system each with 05 verticle levels for storage of material. racking for double deep type storage of 480 pallet of size 1300mm(w) x 1200mm (d) x 1250mm (h). loaded pallet weight: pay load with pallet 1125 kg max. system details:-working aisle -01 nos. (double deep)store rack -24 nos./rowtotal rack in 1 aisle-24 (left) + 24 (right)= 48 nos.no. of level- 5 nos/racktotal pallet-48 x 5 x 2 = 480 nos.load capacity- 1125 kg/levelsingle mast stacker crane-01 no. 81 (f)aisle equipment:-this will consist of electrical as well mechanical aisle equipments and willl be designed as per the pallet requirement. the mechanical aisle equipment of bottom rail shall consist of i beam and will be provided with adjustable calmps for holding the rail in position to ensure proper alignment. top rail shall be mounted on the racking. the electrical aisle equipment shall consist of power rail (fully enclosed bus bar having 7 pole system), which is mounted on the racking system below the first loading level.(g) details of rack members:-the racking system shall consist of cold-rolled steel sections as per manufacturers design to accommodate and store pallets and connected systems.(h) loading- unloading station/ conveyor(i) pallet load 1125 kg max.(ii) bearing- skf equivalent make(iii) motor- seimens/sew euro drive/nord sew/ bonfiglioli or equivalent(iv) gear box- bonfiglioli make or equivalent(v) v.f.d.- yashkawa make or equivalent(j) all steel surface shall be powder coated finish with 8 tank treatment process.(k) maintenence: the annual maintenence of complete asrs system duyring the defect liability period of two years shall be included in the rate quoted for the system and the amc contract duly signed with the manufacturer of the asrs system shall be submitted at the time of handling over the system. the amc shall include all spares and consumables etc required during the period of two years and nothing extra shall be paid on this accountnote- 1mechanical safety provision (i) end of aisle shock absorbers / bumpers for stacker crane.(ii) end of travel buffer for the lifting crane.(iii) safety catches on lifting carriage.(iv) anti-tilt mechanism for the stacker crane.(v) continuous rail cleaning brush for floor rail.(vi) adjustable rail clamp to ensure alignment. 82 (vii) resilient rubber pads on adjustable clamps for vibration dampening.(viii) profile check on lifting carriage to check all three dimensions (width, depth & height) of the pallet. note - 2 electrical safety provision (i) there shall be emergency stop push button at all panels and stations.(ii) optical light beam amd mechanical safety sensor to stop the operation in case of improper storage or obstruction in the operator window either internal or external reasons like operator hand or material placed at edge of the tray.(iii) back up circuitry for proper system operation.(iv) an electromagnetic brake shall be used to avoid the slippage of the hoist.(v) stopper shall be provided for the maintenance door.(vi) load cells shall be provided for the over weight of tray.(vii) automatic door shall be provided for operator safety while machine in operating condition.note - 3 physical safety provision (i) the asrs system shall comprise of safety fences having grid size of max. 40 x 40mm & wire dia should be of min. 3 mm. height of the fencing should be minimum 2.0 meter.(ii) one no. of electromagnetic aisle access door shall be provided. it should cover the complete length of the system on one side.(iii) a manual locking system to restrict the movement of unauthorised personnel shall be provided.note: design report shall be submitted before execution of work at site by the contractor toge for his scrutiny / comments and futher submitted to ao for obtaining approval. item no. 13.070 below shall be compatible with this item/ system and both should be integratedmake of asr system:armstrong ltd/ godrej koerber/ kardex india storage solutions pvt ltd/ daifuku india pvt ltd/ addverb technologies ltd/ craftsman automation ltd/ tech-mark 83 supply, installation, testing and commissioning of advance inventory management system with computer hardware with compatible inventory software complete all as specified and directed by the engineer-in-charge. technical specification of the system(i) system height : 6400 (±100) mm(ii) system width : 3150 (±100) mm(iii) system depth : 2300 (±100) mm(iv) system base : 7.24 sq.mtr(v) tray int. size: 300 (h) x 2450(w) x 500 (d) in mm(vi) tray dead weight - 57 kg (approx.)(vii) per tray weight capacity - 300 kgtechnical specification of the system:-(viii) tray quantity : 32 nos.(ix) usable net load - 9.6 ton(x) storage surface area per system - 39.2 sq mtr(xi) door - automatic(xii) power consumption - 3.7 kw(xiii) power supply - 440v, 50/60 hz, 3 phase(xiv) motor 3 phase 1440 rpm - seimens make or equivalent(xv) chain - diamond makeor equivalent(xvi) bearing - skf/ntn make or equivalent(xvii) external cladding - epoxy powder coatedsafety features:1. photo curtain at access port, 2. motor protection relays, 3. limit switch at door, 4. single phase preventer,5. switch mode power supply, 6. 15 min battery backup for plc, 7. noise less than 60db, 8. emergency stop various safety alertsnote: the system and software provided under this item shall be of same make as for item 13.069 or a compatible system and software as recommended by the chosen manufacturer of asr system. this system shall be integrated with asr system. 84 supply, installation and testing of car traffic boom barrier 6 mtr suitable to working on power supply 230 volt, 50 hz, 24v dc electric motor, adjustable with cams, operating ambient temperature from -20 to +55 degree celsius, uses cycle 2000/day, air cooling, type of beam is rectangular with skirt, effective torque 280-290 nm open/close time 2 to 4 sec complete all as specified and as directed by engineer-in- charge.make: faac/parkilo/skidata/bft 85 external water supplysupply and fix foot valve conforming to is,100 mm dia complete all as specified and directed. 86 supply and fix cast iron air release valve with 100 mm bore and two outlets as per is:14845 complete all as specified and directed. 87 supply, installing, testing and commissioning of electrically driven horizontal centrifugal pump set 9.0 lps at 50 meter head as per specification, motor tefc type, 2880 rpm, 415 v, 50 hz, 3 phase, class f insulation, ip 55 protection, starting on suitable star delta starter. the pump shall be horizontal, end suction, top discharge. the pump shall have cast iron casing, cast iron/bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on rcc (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 550 lpm at 45 mtr head inclusive of suitable rated three phase starter as recommended by the manufacturer, pvc insulated copper cable connection from starter to the motor terminals all as specified and directed by the engineer-in-charge.(01 no. working + 01 no stand by)make:- kirloskar brothers/crompton or equivalent. 88 supply, install, test and commissioning of lt panel, indoor type, powder coated, 2.0 mm thick crca sheet, cpri approved having, ip 43, ms angle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply, bus bar chamber with horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 2.0 mm thick crca sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables. providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, track resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. andcomprising as under: lt panel for pump house. the lt panel comprising of the following:- 89 incoming:-mccb, thermal magnetic release, 4 pole, 415 volts, 100 amps, breaking capacity 36 ka- 01 no. ics =100% icumetering unit:- (a) r y b indications (led type)- 01 sets(b) digital multi function meter - 01 no.(c) cts - 100/5a, cl-1, 15 va - 01 set(d) horizontal aluminium busbar for 3 phase, 440 volts, 50hz, 4 wire system of rating 350 amps for phase and 350 amp for the neutral baroutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 63 amps, breaking capacity 16 ka- 02 no. ics =100% icu -2 nos.(b) mcb, tpn 40 amp, 415 volt, c curve - 02 nos.(c) star delta starter 12.5 hp, 3 phase, 415 volt- 02 nos.(d ) digital ammeter - 2nos.(e) single phase preventer - 2 nos. 90 m & l valve chamber of internal size 0.90m x 0.90m x 0.90m (internal dimensions) including excavation of earth work in any type of soil, 150mm thick pcc in 1:4:8 type d2 foundation, brick work in cm 1:6, 15 mm thick rendering in cm 1:4 to internal surfaces and external surfaces upto 150mm depth below gl, pcc 1:3:6 type c1 as in coping, cover with two nos. of hinges and one no. handle made out of ms round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. note:- the quoted rate shall include all earthwork and connected items. 91 m & l earthing complete with galvanized steel earth plate electrode of size 600mmx600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal gl and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in electrical plate no. 3 connecting to earthing test point, including necessary earth work in any type of soil, pcc earth chamber made in pcc 1:3:6 type c1 (using 20mm graded aggregate), common salt, charcoal, ci funnel, earth pit cover in rcc 1:2:4 type b1 (using 20mm graded aggregates), with 8mm ctd bars @ 100mm c/c in both ways, including necessary form work complete including necessary test on completion all as specified and as directed. 92 external electrificationm & l for ht/lt ms cable route indicator, engraved the description on the disc not less than 6 dia welded with 40x6xmm ms strip of approx length 90 cm duly painted on the steel parts as per colour code and provision of pcc 1:4:8 type d-2 using 40 mm grade stone aggregate of not less than 0.05 cum in each at base under the ground including necessary earth work and formwork complete all as specified and directed.note: ht route indicator shall be painted as under:-(i) for ht 11 kv cables - “brown”(ii) for lt cables - “blue” 93 supply and fix compact air insulated bus bar trunking system with copper busbar 1600 amps, 50 ka breaking capacity, ip54 protection, bus duct 1600 a, 415 volt, capacity sandwich type, set rybn complete with accessories such as flange ends, vertical bends, supporting brackets etc from transformer to lt panel board complete all as specified and directed. 94 supply, install, testing and commissioning of distribution transformer step-down level 2 (previously ee level 3 before amendment no 4 to is 1180), 11kv0.433kv, three phase complying withis: 1180/iec-76(part-1) 2014 with latest amendments, indoortype double copper wound suitable for 50 hz system of capacity 800 kva, oil immersed naturally cooled delta connected on ht side and star connected on lt side, vector group dyn11, provided with off load tap changer to vary secondary voltage from -7.5% to + 7.5 % in step of 2.5 %.losses should be confined to the limits specified as follows: maximum allowable losses atfull load (100 %) & half load (50 %) shall not be exceeded 5838 watts & 2147 wattsrespectively as per grlha rating, percentage impedance: 4.5%. losses and impedance are subjected to tolerance as specified in is 1180. the transformers should be supplied with first filling of oil confirming to is 335. the transformer should have both side cable end box with neutral brought out complete all as directed by engineer - in -charge, and installation of transformer shall be carried out as per is-10028and comprising with the following standard fittings/technical specifications:-(a) lifting lug for transformer and tank.(b) earthing terminal rating and diagram plate.(c) air release device.(d) oil filling inlet pipe with plug.(e) drain outlet pipe with brass gate valve.(f) conservator tank with oil level indicator(g) silica jel breather(j) first fill of oil upto level including conservator tank with fresh new oil conforming to is335.(k) type of connection delta/star(l) type of cooling: oil and natural air.(m) vector group: dyn 11.(n) temperature rise over an ambient of 50 °c maximum.(o) cable end box on both side for ht/lt cables of suitable size.(p) provision of thermometer with pocket.(q) provision of oil and winding temperature gauge. 95 supply, install, test and commissioning of lt panel, indoor type, powder coated, 2.00 mm thick crca sheet, cpri approved having, ip 43, msangle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply,bus bar chamber with horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 1.6 mm thick crca sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables. providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, track resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. andcomprising as under: the lt panel comprising of the following:- main lt panelhorizontal copper busbar for 3 phase, 440 volts, 50 hz, 4 wire system of rating 1600 amps for phases and 1600 amps for neutral. 96 incoming:-incomer:-acb 4 pole, 415 v, 50 ka with thermal magnetic release (manual draw out type) of capacity 1250 ampmetering unit:- (a) r y b indications (led type)- 1 sets(b) digital multi function meter - 01 no.(c) cts - 1600/5a, cl-1,15 va - 1 setoutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 630 amps, ics =100% icu, breaking capacity 35 ka, ics =100% icu- 02 no. (for dg amf panel & spare)(b) mccb, thermal magnetic release, 4 pole, 415 volts, 400 amps, ics =100% icu breaking capacity 36 ka- 02 no. (for apfc panel & fpb 2 near bulk store) (c) mccb, thermal magnetic release, 4 pole, 415 volts, 320/315 amps, ics =100% icu breaking capacity 36 ka- 01 no. (for fpb 1 near adm block) (d) mccb, thermal magnetic release, 4 pole, 415 volts, 200 amps, ics =100% icu breaking capacity 36 ka- 01 no. (for existing load)(e) mccb, thermal magnetic release, 4 pole, 415 volts,125 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for fpb 3 near auction disposal store)(f) mccb, thermal magnetic release, 4 pole, 415 volts, 32 amps, ics =100% icu breaking capacity 25 ka- 03 no. (for mt complex, watch tower no 2, guard room)(g) digital ammeter with suitable ct for each outgoing 97 supply, install, test and commissioning of lt panel, outdoor type, powder coated, 3.00 mm thick crca sheet, cpri approved having, ip 54, ms angle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply,bus bar chamber with horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 2 mm thick crca sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables. providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, crack resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. feeder panel no.1 (near admn bldg) 98 horizontal aluminium busbar for 3 phase, 440 volts, 50hz, 4 wire system of rating 600 amps for phases and 600 amps for neutral.incoming:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 400 amps, breaking capacity 36 ka - 01 no. ics =100% icumetering unit:- (a) r y b indications (led type) - 1 sets(b) digital multi function meter - 01 no.(c) cts - 600/5a, cl-1,15 va - 1 setoutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 200 amps, ics =100% icu breaking capacity 36 ka- 02 no. (for 2nd floor & spare)(b) mccb, thermal magnetic release, 4 pole, 415 volts, 160 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for 1st floor)(c) mccb, thermal magnetic release, 4 pole, 415 volts, 63 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for g floor)( d) digital ammeter with suitable ct for each outgoing 99 supply, install, test and commissioning of lt panel, outdoor type, powder coated, 3.00 mm thick crca sheet, cpri approved having, ip 54, msangle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply,bus bar chamber with horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 2 mm thick crca sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables.providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, crack resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. feeder panel no.2 (near bulk store) horizontal aluminium busbar for 3 phase,440 volts, 50hz, 4 wire system of rating 600 amps for phases and 600 amps for neutral. 100 incoming:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 400 amps, breaking capacity 36 ka - 01 no. ics =100% icumetering unit:- (a) r y b indications (led type)- 1 sets(b) digital multi function meter - 01 no.(c) cts - 600/5a, cl-1,15 va - 1 setoutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 200 amps, ics =100% icu breaking capacity 36 ka- 02 no. (for equipment load & spare)(b) mccb, thermal magnetic release, 4 pole, 415 volts, 125 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for bulk store)(c) mccb, thermal magnetic release, 4 pole, 415 volts, 32 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for watch tower no. 1)( d) digital ammeter with suitable ct for each outgoing 101 supply, install, test and commissioning of lt panel, outdoor type, powder coated, 3.00 mm thick crca sheet, cpri approved having, ip 54, msangle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply,bus bar chamber with horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 2 mm thick crca sheet, duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables.providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, crack resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. feeder panel no.3 (near auction disposal store) 102 horizontal aluminium busbar for 3 phase, 440 volts, 50hz, 4 wire system of rating 200 amps for phases and 200 amps for neutral.incoming:-(b) mccb, thermal magnetic release, 4 pole, 415 volts, 125 amps, breaking capacity 25 ka- 01 no. ics =100% icumetering unit:- (a) r y b indications (led type) - 1 sets(b) digital multi function meter - 01 no.(c) cts - 200/5a, cl-1,15 va - 01 setoutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 100 amps, ics =100% icu breaking capacity 25 ka- 02 no. (for store dispatch complex & spare)(b) mccb, thermal magnetic release, 4 pole, 415 volts, 32 amps, ics =100% icu breaking capacity 25 ka- 03 no. (for pol store, auction disposal store, covered hard standing)(c) digital ammeter with suitable ct for each outgoing 103 supply and fixing poly carbonate street light junction boxes ip 66/67 weather proof suitable for outdoor installation having minimumsize255 x 355 x 122 including suitablecable connecting terminals, cable lugs, including provn of one no. mcb sp 6 amps for operating the street light fittings, suitable cable glands as per site requirement, all as directed by the engineer-in-charge. 104 s & f street light bracket made out of gi tubing 32/40 mm dia, light grade of length1.2 mtr long bend to shape suitable for security light fitting with necessary ms clamp-02 nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers and 3 core frlsinsulated sheathed, multistranded copper conductor of size 1.5 sqmm for phase and neutral and 1.5 sq mm for earthing drawn throughthe poles for connection from junction box to light fitting complete etc all as specified.note: phase should be red/yellow/blue, neutral should be black and earthing wire should be green in colour. two runs of cable for phase and neutral and one run of cable for earth will be measured and paid as one unit length. 105 supply and fixing of led ?ood light, 200w, watt 230 v, ac outdoor type with thermal management in multiple optics and equipped with ip66 protection, with impact and corrosion resistant complete with driver and lamp and made up of pressure die cast aluminium housing with toughened glass and high power leds and secondary lenses with ip protection incl system efficiency >110/120lpw 10kv spd included energy saving, environmental friendly and general purpose lighting complete all as specified and directed engineer-in-charge. make : make : crompton/philips/wipro 106 supply and fix high mast panel outdoor type, suitable to take load up to 6 kw, conforms to is/iec 60947-4-1, provided with protection degree ip 54, extended wide band (150 vac - 300 vac) coil, frls (fire retardant low smoke) internal wiring, in-built short-circuit protection, class h insulation, 3 phase 415 volts ac with the following accessories:phase : 3 phase, 415 voltsmax load capacity : 6 kwtimer type: astronomicalcontactor rating : 32 a tpmcb rating : 63 a tpnmake : crompton/ philips/wipro 107 supply and laying dwc (double wall corrugated) duct pipe outer dia 63 mm and inner dia 50 mmconforming is 16205 (part 24 ) for protection ofelectric cable complete all as specified and directed. ( for 10 sqmm st light cable & 16 sqmm cable) 108 aviation obstruction lightsupply and fix aviation obstruction light integral aviation light comprising of aluminium housing with polycarbonate enclosure, 240 volt with timer switch and one no.10 a, mcb, spn 230 v with fixed enclosure complete all as specified and directed by engineer-in-charge.make:- bajaj cat no bgav 302 led or equivalent in philips/crompton/surya 109 incineratorsupply, fixing and testing of solid waste electric incinerator, single chamber type having a combustion chamber supported with electric coil for generating sufficient heat to burn 100kg/hr solid waste, retains and re-burns the exhaust gases for minimum of 2 seconds at 850°c, stainless steel stack for longevity, fitted with a velocity cowl as standard, chamber designed for maximum air flow and circulation which in turn improves efficiency and total burn time, easy to open and close loading door, designed to increase operator safety, steel cladding to reduce risk of infection and increase longevity of system with working temperature not less 450 degree celsius mounted on foundation as recommended by oem including electrical control panel with suitable size mccb, relays & contactor recommended by oem complete all as complete all as specified and directed.note:(a) the electrical works including electrical lt panel, internal wiring of the lt panel, suitable size copper wires from panel to solid waste electric incinerator as recommended by oem to operate the solid waste electric incinerator of capacity 100 kg/hr to make solid waste electric incinerator operational is deemed to be included in the rate quoted. (b) all electrical works shall be carried out as per relevant bis/ls equivalent standard norms only and also in accordance with the latest edition of the indian electricity act / rules formed there under and as amended from time to time.(c) any other works (mechanical, electrical & civil) connected to installation, testing & functional requirement of solid waste electric incinerator of capacity 100 kg/hr all as mentioned above and which is not mentioned or included in this schedule but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same.(d) foundation/plinth/base: shall be provided as per manufactures recommendations, however minimum 0.5m space should be available all around the solid waste electric incinerator and height of plinth shall not be less than 0.5 m 110 supply & fixing mccb, thermal magnetic release, 4 pole, 415 volts, 200 amps, breaking capacity 36 ka- 01 no.ics =100% icu with sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 111 electric sirensupply and fixing sirens electronic type horizontal double mounting three phase 400/440v, 2800 rpm 50 c/s flame proof, audible range 3.5 km, 2 hp, continuous normal operation for at least 50 minutes with on/off system complete all as specified and directed. 112 supply and fix advance sirens controller electronic type suitable to operate on 3 phase, 415 volt ac 50 hzcomplete all as specified and directed. 113 supply & fixing mccb, thermal magnetic release, 4 pole, 415 volts, 63 amps, breaking capacity 25 ka- 01 no.ics =100% icu with sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 114 solar power plantdesign, supply, installation testing and commissioning of roof top solar photovoltaic power plant (on-grid) on roof top of existing bldg of capacity 150 kwp, power evacuation at 415 volt 3 phase system all as per guidelines/norms issued by mnre & indian metrological deptt approved solar radiation data viz direct normal irradiance, global horizontal radiance etc complete comprising with the following solar photo voltaic plant.(a) design, supply, installation, testing and commissioning of solar pv modules capable of generating 150 kwp (ac) electricity at 415 volt 3 phase system. these solar pv modules of 540 watt perc with a modular efficiency of 17-19.84% as per iec and mnre standard or as per approved design parameters with poly/multi crystalline silicon solar cells of minimum wattage of 540 watt with minimum 144 cells & efficiency not less than 17 -19.84%, conforming to iec 61215, iec 61730, iec 61701. solar pv module should be of approved indian brand only and qualify under the domestic content requirement (dcr) norms of nvvn/seci and testing requirement fixed by mnre. the pv modules shall be warranted for a period of minimum 25 years, solar pv modules used in system shall be warranted for their output peak watt capacity, which should not be less than 90% at the end of ten years and 80% at the end of twenty five years. each solar pv module must use rf identification tag. the following information must be mentioned in the rfid used in each module:name of manufacture of pv module, name of manufacturer of solar cell, month & year of manufacturer (for solar cell and module), country of origin (lt is mandatory to use cells and modules manufactured in india). i-v curve of the module, wattage, lm, v-m, & ff for the module, unique serial no & model no of the module, date & year of iec pv qualification certificate, name of the test lab issued iec certificate. the pv modules used in the solar power projects must qualify to the latest edition of the following international electro technical commission (iec) p module qualification test or equivalent bis standards. the pv module must be tested and approved by one of the iec authorized test centres. 115 (b) material and labour for module mounting structure (mms) fabricated from hot dip galvansied iron section of suitable size with specified tilt angle according to site requirement & optimum angle to achieve maximum benefit of solar energy and suitable to withstand 180 kmph wind speed all as per approved design parameters as per mnre standards and to match with the existing site conditions. necessary roof treatment to avoid any seepage in future shall be done by the contractor and the amount included in the rate quoted. the roof tiles shall be dismantled and refixed back in original position. structure shall be built with brick masonry basement of adequate size as per direction at site including all necessary civil work required for the foundation.(c) supply, laying & testing of dc cable minimum size 4/6sq mm multi stranded copper conductor, conforming to relevant is, weather proof uv resistant with operating temperature up to 120 degrees, minimum rated voltage 1100 volt for inter connection of spv modules to array junction box including suitable size of cable lugs, male & female mc4 connectors & joints etc.(d) supply, installation test and commissioning of protection devices mccb 400 a, isolator and three phase 4 wire lt energy meter, array junction boxes having rating 150 kwp with over voltage protection and surge protection.(e) supply, installation, test and commissioning of grid tie solar power conditioning unit / inverter of minimum capacity 150 kwp(dc to ac 415 v in three phase system) all as per approved design parameters & capable of generating output voltage 415 v ac at rated load condition with efficiency not less than 98 %, conforming to iec 600682-2 nde standards with power reduction, lvrt with protections for anti-islanding, ground fault monitoring, grid monitoring, ac & dc over voltage and under voltage protection, ac & dc short circuit lover current protection and dc reverse polarity protection, graphic display etc. all as specified and as directed.(f) material and labour for earthing for lightning protection for spv modules etc as per ie rule, mnre guide line & bis all as per approved plan complete with galvanised earth plate electrode 600x600x6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including gl strip 32x6mm size protected with gl medium grade pipe 40mm dia for earth electrode up to test point by means of gi nuts, bolts, check nuts and washers including earth work excavation, pcc (1:3:6) type cl pit and rcc cover ( 1:2:4) type bl and funnel, with necessary charcoal, salt etc complete. 116 (g) supply and fixing aluminium strip of size 25 x 3mm thick for roof / down conductor fixed on insulators/ saddles of suitable size for spv modules lightning protection upto interconnection between roof top la to ground earthing system. (h) ac cable: supply and laying of 150 sqmm lt xlpe insulated, screened pvc bedded, sheathed with multi-stranded aluminium conductor armoured with galvanised steel wire 1100 volts grade heavy duty conforming to is 150 sqmm x 3.5core as per site requirement.note (i) :-(a) before quoting the bid, contractor or his authorised engineer/consultant must visit the proposed site to study the site condition.(b) before commencement of work, contractor shall submit drawings & lay out plan with scale including required qty to accepting officer for approval.note(ii):-(a) the mechanical structures, electrical works and overall workmanship of the grid solar power plant must be warrented for a minimum of 5 years.(b) all mechanical, electrical works shall be carried out as per relevant bis/ls equivalent standard norms only and also in accordance with the latest edition of the indian electricity act / rules formed thereunder and as amended from time to time.(c) any other works (mechanical, electrical & civil) connected to installation, testing & functional requirement of solar photovoltaic power plant of capacity 150 kwp (ac) all as mentioned above and which is not mentioned or included in this schedule a but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same(d) contractor shall provide adequate spares/items required for minimum period of 1 year maintenance including dc & ac items under scope of work.note (iii) : design report shall be submitted before execution of work at site by the contractor toge for his scrutiny / comments and futher submitted to ao for obtaining approval. 117 dg setsupplying, installing, testing and commissioning, factory assembled silentdiesel engine driven generator set, fully wired alternator ac to give an out put of 400 kva continuously rating at a power factor 0.8 lagging, 3 phase 4 wire, 415 volts 50 hzsupply, 1500 rpm, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, pcc foundation work as per manufacturers instructions, vibration damper pads, control panel & other accessories etc and comprising of following.(a)diesel engine: liquid cooled turbo charged with after cooler to deliver suitable bhp at 1500 rpm under ntp conditions of bs 5514 and conforming to is 10001/ 10002, din 6271 & iso 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories:. diesel engine of rated speed at full load electric start developingwithsystem with radiator and including electronic governor control of class a1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries ofadequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete.(a) radiator with blower fan or heat exchanger with guard.(b) pipe coupling for engine cooling system piping.(c ) corrosion inhibitor coolant(d) paper element filters(i) fuel filter(ii) lube oil filter(iii) by pass(e) fly wheel housing and fly wheel to suit alternator.(f) engine bearing mechanism in fly wheel housing.(g) shut off coil with safeties for llop/hwt/over speed.(h) dry type air cleaners and vacuum indicators.(j) residential silencers.(k) stainless steel exhaust flexible bellows. 118 (l) motor driven priming pump.(m) battery charging alternator.(n) exhaust piping made out of stic c class, ms pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturers recommendations to sustain back pressure with rain cap.(o) mineral wool insulation 2 inch thick suitable for 400 degree celsius temperature cladded with aluminium sheet o30 gauge for the entire length of exhaust pipe.(p) first fill of oil, coolant and diesel during commissioning and 12 hours testing.(q) interconnecting copper cabling of adequate capacity batteries control.(r ) fuel pipe class stic 1 /1.5 /2 dia - 01 lot(s) self starter 12 volts dc.(t) electric operated electronic governor.(u) fuel injection pump.(v) no of cylinders - 12 no vee(w) electronic instrument panel, complete with all accessories as per manufacturers specifications displaying the following:-(i) 12vx2 nos -24v battery. (ii) water temperature.(iii) lubricating oil pressure.(iv) engine speed -1500rpm(v) engine hours(vi) frequency.(vii) voltage.(w) safety control (trip and indication).(i) high water temperature(ii) low lube oil temperature(iii) overspeed stop 119 (x) base frame: sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturers design alonwith avm pads.(y) battery:-24 volts(2x12v battery) dc, 180ah, maintenance free battery conforming to is:14257 with leads & terminals (make- excide/amron).(z) fuel tank:12 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick hr/ms sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, in let arrangement for diesel filling fro exterior canopy (without opening its panel) etc complete all as specified and directed.(aa) isolator panel with 250 amp mccb(ab) auto logic panel for automatic stat(b) alternator: alternator suitable rated for 400 kva, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 hz at 1500 rpm, self excited and self regulated with avr brushless, screen protected, drip proof , insulation class-h, ip -23, voltage regulationgrade - vg 3 self ventilated and conforming to bs: 5000 / is: 4722 suitable for engine as mentioned here-in before, conformig to is: 13364(part-1)make: koel green / stampford/crompten/kirloskar/greaves(c) acoustic enclosure:- m & l for acoustic enclosure for the above 400 kva dg set to reduce noise level to 75 db measured at 1.0 meter distance for audible frequencies as per guide of central pollution control board andmanufacturers specification and comprising of following from authorised goems of gen set manufacturers specified :-(i) sound insulation : 100mm thick rock wool (density 64 kg/cum).(ii) outer body : 1.6mm thick crca(iii) door : 1.6mm thick crca(iv) base frame : ismc 300(v) inside illumination : 1 no.- 1 x 18 watt led fitting of make phillips/ bajaj/ crompton.(d) amf control panel:- factory fabricated cubicle type, free standing, floor mounted, indoor type, ip-43, amf control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.0mm thick crca sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: 120 (e) amf control circuit with 4 pole mccb 630 amps - 2 nos, with ultimate breaking capacity icu-50 ka at 415 volts and microprocessor release conforming to iec 60947 part-i with breaking capacity ics=icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 nos. for main supply & dg set supply with hrc back up fuse complete with all dc control relays/ line voltage monitor (lvm) as per oem specifications incorporating motorised stored energy operating engine start, stop, three attempt starting facility and failure to start etc.(f) digital load manager : three phase 4 wire indicating v,i,pf, kva, kw, f of enercon make with serial communication port model no.em6400 with class 1.0 accuracy meter or equivalent make suitable rating of ct per phase- one no.(iii) indication lamp r, y, b with 3 nos. of 2a hrc fuses-10 sets.(iv) bottom gland plate for incoming and outgoing cables.(v) circuit diagram plate.note :- dg set should be as per cpcb -4 latest norm wef 01 july 2023 of national clean air programme (nacp) act 1981. 121 supply, install, test and commissioning of lt panel, indoor type, powder coated, 2.00 mm thick crca sheet, cpri approved having, ip 43, msangle iron section of 50x50x6 mm frame, suitable for 3 phase 415 volts 50 hz, ac supply,bus bar chamber with horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natuaral flow of air.the bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. the inner shell be made out of 1.6 mm thick crca sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing mccbs/mcbs and metering devices and suitable busbar chamber for passing and connecting ug cables.providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size f class insulators made on non hygroscopic, non combustile, track resistant, high strength frp/smc/dmc material at an interval of not more than 300 mm through out the length of the tpn bus bar all as specified and directed by the engr-in-charge. feeder panel no.1 (dg panel ) 122 incoming:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 630 amps, breaking capacity 36 ka - 01 no. ics =100% icumetering unit:- (a) r y b indications (led type) - 1 sets(b) digital multi function meter - 01 no.(c) cts - 800/5a, cl-1,15 va - 1 setoutgoing:-(a) mccb, thermal magnetic release, 4 pole, 415 volts, 400 amps, ics =100% icu breaking capacity 36 ka- 02 no. (for package ac bulk store & spare)(b) mccb, thermal magnetic release, 4 pole, 415 volts, 160 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for pump house & fire pump)(c) mccb, thermal magnetic release, 4 pole, 415 volts, 80 amps, ics =100% icu breaking capacity 25 ka- 01 no. (for incianator)(d) mccb, thermal magnetic release, 4 pole, 415 volts, 32 amps, ics =100% icu breaking capacity 25 ka- 07 no. (for terrace pump 1, terrace pump 2, power house, high mast 1, high mast 2, street light)(e) digital ammeter with suitable ct for each outgoing(f) astro time switch for 3 phase 20a- 1 no(g) 3 phase power contactor 20 amps, with 230 coil 123 sewage disposalm & l for laying of dwcpe sewage pipes line 200 mmdia borepipe sftiffnessclass sn 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 124 m & l for laying of dwcpe sewage pipes line 150 mmdia borepipe sftiffnessclass sn 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 125 compound walls & f concertina coil of 600/700 mm outer dia made out of 2.60 mm dia spring steel wire dipped in corrosion preventive fluid (rusilo 901) of castrol make each coil having min 50 turns (circles) covering 6 m and an average weight not less than 8.57 kg (plus or minus 5 %) incl handle and spike at both ends of coil erected in position on top of mild steel angle by fixing with 1.70 mm gi wire for securing, coil with fish hook bars, incl necessary welding to ms sections etc all as specified and directed. 126 green building norms(griha concept)supply and install organic waste converter fully automatic having capacity 50kg/day, having internal tank made of high quality stainless steel while external panels are powder coated for enhanced product life with necessary electric control panel, cabling necessary civil works for installing machine etc with following requirements:-type of machine: fulley automatic in-vessel compostercomposting method: 24 hrs. micro-organisms-based compostingmachine type of microganism used: heat resistant thermophilic bacteria final output: dry organic soil conditioner/soil supplementscycle time: 24hrs volume reduction in 24hrs: 80-85% internal tank: stainless steel type main agitator shaft: stainless steel type input voltage: 415vspecial features: vfd as standard across all models, touchscreen standards daily waste processing: 150kgs rated capacity: 7kwpower consumption (kwh par cycle): 13-15length: 1650, width: 850,height: 1455 127 supply, installation, testing and commissioning three phase energy meter with the following specifications: microprocessor based three phase, smart electricity meter, equipped with a bi-directional cellular (nb-iot) communication that allows it to interact with the head end system (hes) for data collection and configuration with adequate security including electronic static pre paid cum postpaid energy meter rating 415 volts, 50 hz of range 10-100 amps, complying to is16444:2015 (reaffrimed 2020) and conforming to is 3779 with led display and parameters like voltage, current, frequency, power, power factor, kwh/kva, default in built dual source, inbuilt long range (lorawan) communication suitable for outdoor lora data accumulator and also compatible for prepaid and postpaid online energy monitoring billing system with disconnection /reconnection through remote software / data export to erp complete with 5 years warranty.note:(a) the contractor would be responsible for removing the existing meter, noting down the reading and depositing it with the mes age e/m store complete all as specified & directed.(b) the energy meter to be capable of running in both prepaid and postpaid mode.(c) the meters to carry 5 year warranty. (for entire system) 128 supplying, fixing, commissioning and testing of configuration of cloud hosted multi user web based software with following modules:(i) head end system (hes): to acquire meter data automatically from dcu sand monitor parameters acquired from meters.(ii) meter data management modulethe meter data management module would be responsible for collecting the data from the data concentrator and make the data available to the billing system. the system would support offline meter(a) 30 min instantaneous data from all the meters for seven parameters cumulative energy. cumulative apparent energy (as applicable), power, current, voltage, power factor and frequency(b) monthly billing survey data for cumulative energy and max demand(iii) billing module: the billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data/billing data available to admin and end users. the billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing. it would allow postpaid and prepaid functionality as required.(iv) occupation and vacation module: the system would support occupation/vacation based on the unit catagories. the system would support automatic data capture on occupation and vacation events.(v) website: there would be a dedicated website forage/ge and bso team to view all the data and information alongwith customer portal for use of customer. the designated users in mes would have the admin access to the application. the mes staff would also have the access to the key information on mobile app (androiandios based) for admin use complete all as specified and directed.(vi) customer module: the system would include a customer portal for the resident/occupants to login and view their own energy /billing data and recharge facility. there shall be consumer app (android and ios based) also to log in and view their own energy/billing data and recharge facility.(vii) communication module :the system would provide communication of energy data and bills via print, email and sms methods. 129 (viii) meter master data: the system would support meter data repository. the system would support meter replacement process.(ix) excel export: the system would support export of metering and billing data in excel and pdf format.(x) energy accounting module: the system would include features of energy accounting, the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available.(xi) prepayment/recharging facility:the system should periodically monitor the energy consumption of prepaid consumers and decrease the available credit based on the consumption. the system should allow online/digital recharging through consumer app (androidand iosbased) and web portal. the configuration and necessary arrangement for payment gateway and e-mro facility shall be deemed to be included in the quoted rate. the system should sendconnect/disconnect command on the basis of available credit.low credit alarm: the system will give an alarm over the consumer app and sms to the registered mobile number in case the credit in the meter goes down be low apredefined limit.emergency credit: the meter will work even when the credit falls down to zero to prevent disconnection. this limit shall be configurable. the system should support happy hours inorder to prevent disconnection in non working hours and on holidays. the happy hours should be configurable complete all as specified and directed. 130 supply, installation, testing and commissioning of dcus/gateways and the arrangement of sim cards or internet to enable reliable medium for two-way communication between smart meter & hes. the data acquisition (push/pull) frequency shall be, configurable. it shall push events such as tamper, power off etc. to hes immediately on occurrence/receipt from meters. it shall have provision for the cellular, wifi and ethernet communication for the backhaul to hes. it shall be capable to handle data of minimum 1000 nos. of any type of smart meter (1ph/3ph).it shall be able to communicate with the nearest meters at a distance of at least 500 m, depending on topographical features. communication of the nearest meters with other meters shall be established through appropriate mesh formation. rf mesh shall support self-forming and self-healing features. the equipment shall be weather proof and dust proof (minimum rating: ip54 for indoor and ip65 for outdoor installation). it shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc complete all as specified and directed. 131 hosting gprs (4g) charges for gateway for five years from the date of completion f including 2 years waranty and 2 years maintinance after warranty) make:-airtel/jio/vodafone 132 supply and installation of digital water flow meter 50mm suitable for domestic and commercial applications complete all as specified and directed. 133 supply and installation of digital water flow meter 40mm suitable for domestic and commercial applications complete all as specified and directed. 134 arboriculturem & l for excavation of pits size 30cm x 30cm x 30cm in loose soil and filling the pit with mixture of river sand and approved top soil in the proportion of 1:3 mixed with 30% of cow dung powder, 100gms of bone meal and 100gm of neem cake powder 135 all as per item no 13.121 above but pit size 60cm x 60cm x 60cm 136 supplying and planting red palm or royal palm healthy sapling having 45cm height and shall have a minimum height of 65cm after 6 months 137 supplying and planting coconut tree healthy sapling having 75cm height and shall have a minimum 95cm after 6 months. 138 supplying and planting flower plants(champa/ hybrid hibiscus/ hybrid west indian jasmine/ hybrid plumeria white plant/ panama yellow plant/ oleander) healthy sapling having 10cm minimum height and shall have a minimum 25cm to 30cm height after 6 months. 139 supplying and planting phylanthus healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 140 supplying and planting bougainvillea colour flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 141 supplying and planting song of india flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 142 supplying and planting dracaena flower plants healthy sapling having 15cm to 30 cm height and shall have a minimum 60cm height after 6 months. 143 supply and planting mexican grass including providing manure as directed. 144 pile foundationboring 450 mm dia piles to any depthin any type of soil/ strata by anyapproved method, complete all as shown on drawings and as specified anddirected.note:- the quoted rate shall include for mobilization and demobilisation of piling equipment, making approaches to site or point of pile boring if necessary. nothing extra shall be paid on this account. 145 boring for bored cast in situ pile 600 mm dia to any depth through any type of soil / strata, using dmc method (direct mud circulation)and getting out & disposal of spoil to any distance outside of md land , complete all as specified and as directedby the engineerin charge 146 m & l reinforced cement concrete of grade m-35 design mix (rmc) as per is-456using 20 mm graded stone aggregate in cast in situ dmc bored pile of any length / any sectionscomplete all as specified and as shown on drg 147 m & l reinforced cement concrete of grade m-35 design mix (rmc) as per is-456using 20 mm graded stone aggregate in pile caps / grade beams complete all as specified and as shown on drg 148 providing tmt bars (crs/hcrm/crm) in reinforcement 10 mm dia and over for bored cast in situ piles of any length and any dia all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with and including 0.9mm dia ms wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (fe-500d). 149 providing tmt bars (crs/hcrm/crm) in reinforcement 10 mm dia and over for pile caps and grade beams, cut to length, bent to shape required, hooking ends and binding with and including 0.9mm dia ms wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (fe-500d). 150 all as per item no 13.136 here-in-before but5mm dia and over upto and including 10mm dia as in helicals for piles and stirrups for grade beams complete all as specified and directed. 151 m & l for providing pcc (1:4:8) type d-2 using 40 mm graded stone aggregate for concrete layer below pile caps foundation complete all as specified and directed. 152 formwork to sides of pile caps/ grade beams and similar work, rough finished surface of concrete flat all as specified and as directed. 153 m & l for carrying out non destructive integrity test all as per is 2911 (part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. 154 m & l for carrying out initial load test (vertical load test) cast in situ piles of 600 mm dia as per is 2911 (part 4) 2013 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(note :- providing and installing test piles shall measured and paid separately) 155 m & l for carrying out initial (lateral load test) cast in situ piles of 600 mm dia as per is 2911 (part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(note :- providing and installing test piles shall measured and paid separately) 156 m & l for carrying out initial load test ( pull outtest) of cast in situ piles of 600 mm dia as per is 2911 (part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(note :- providing and installing test piles shall measured and paid separately) 157 m & l for carrying out routine load test (vertical load)all as per is 2911 (part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed 158 testing of piles (initial load test) for 450mm dia cast in situ bored piles all as per is including removing the testing equipments from the site after testing is completed all asspecified and as directed

Central Government/Public Sector

TRN :49055023 | 12 Jun, 2025

Tender Value : 4.85 Crore

Bengaluru Urban - Karnataka

Tender for tender for provision of deficient smqs at af stn chimney hills; 2 general summary note: schedule ‘a’ part i to xii are prepriced by mes under ser no. 1 to 12. bidders shall insert their lumpsum amount in the green coloured field under col-6 only. 3 lumpsum price worked out by the contractor for “internal water supply” as listed in schedule ‘a’part–ii 4 lumpsum price worked out by the contractor for “internal electric supply as listed in schedule ‘a’part–iii 5 lumpsum price worked out by the contractor for site clearance and development as listed in schedule ‘a’ part - iv . 6 lumpsum price worked out by the contractor for road / path / culvert as listed in schedule ‘a’ part - v . 7 lumpsum price worked out by the contractor for area drainage as listed in schedule ‘a’ part - vi . 8 lumpsum price worked out by the contractor for sewage disposal as listed in schedule ‘a’ part - vii . 9 lumpsum price worked out by the contractor for “fencing” as listed in schedule ‘a’ part – viii. 10 lumpsum price worked out by the contractor for “protective works” as listed in schedule ‘a’ part – ix. 11 lumpsum price worked out by the contractor for “external water supply” as listed in schedule ‘a’ part – x 12 lumpsum price worked out by the contractor for “external electric supply” as listed in schedule ‘a’ part – xi 13 lumpsum price worked out by the contractor for “hot water supply” as listed in schedule ‘a’ part – xii 14 schedule a part - idesign and construction of married accommodation building in 3 storey (ground+2 storey)in framed construction with permanent specifications in rcc of grade as per structural drawings, aac block masonry walls, att, pu based wpt, earthquake resistance as per latest is, green building norms with minimum 3 star griha rating etc complete all as specified and as shown on drawings. 15 design and construction of car and scooter parkingshed in rcc framed construction with permanent specifications in rcc of grade as per structural drawings, aac block masonry walls, pu based wpt, earthquake resistance as per latest is, green building norms with minimum 3 star griha rating etc complete all as specified and as shown on drawings. 16 sch a part - xiii : fittings / fixtures & misc items. internal water supply supply and fix 15mm bore kitchen sink tap, brass chromium plated dual flow pattern with silicon black flexible hose swivel type complete all as specified and as directed. 17 supply and fix 3 in 1 chromium plated wall mixer for mixing hot and cold water (for shower) screwed down for iron pipe and fixed complete all as specified and as directed. 18 internal electric supplysupply and fix modular tv socket, one module all as specified and directed by engineer in charge. 19 supply and fix modular telephone socket, rj-11, one module all as specified and directed by engineer in charge. 20 material and labour for telephone wiring with unarmoured solid annealed bare copper industrial cablein concealed of size 0.5 mm, 3 pair with pvc conduit 25 mm diaall as specified and directed by engineer in charge 21 material and labour for tv wiring with unarmoured coaxial cable, rg-11 in concealedwith pvc conduit 25 mm diaall as specified and directed by engineer in charge . 22 material and labour for mild steel box for telephone wiring including blocks, suitable for 30 pair all as specified and directed by engineer in charge. 23 material and labour for earthing complete with galvanised steel pipe electrode of size 40 mm bore, medium grade, 2.5 meter length, burried directly in ground in bore 350 mm dia vertically to a depth not less 3.2 meter below ground level with top edge of the pipe not less than 60 cm below normal ground level connected to galvanised earth lead wire 4.0mm dia by meanswith bolts, nuts check nuts and washers protected by gl light grade pipe of size 15 mm dia and connecting up with the db as the case may be upto a maximum distance of 7.5m away from the earth electrode including test point junction, excavation, earthwork, pcc chamber, rcc cover(yellow painted) with handle, watering pipe 20mm dia gi medium grade with funnel and wire mesh, charcoal dust , salt, mild steel earth markerwith earthing result, date all as per plate no.2 of ssr 1991 and as directed by engineer in charge. note:-boring charges are included in the above quoted rates 24 smart meter systemdesign, supply, installation, integration, testing and commissioning of smart meter with prepaid metering facility, ac single phase, two wire, 240 volts, 50 hz , 10 to 60 amps all as per bis 16444:2015 (reaffirmed 2020) with plug in type bi- directional communication module (the plug in module shall be field swappable /replaceable), includingnecessary communication infrastructure suitable for integration with approved communication technology gprs/rf/hybrid (gprs+rf) /any other advance technology as per cea /trai regulations etc.easily adaptable for network interface and integration with advance metering infrastructure (ami) of the project area complete in all respect all as specified and as directedby engineer-in-charge. 25 tv & telesupply and fix pvc conduit 25 mm diaconcealed in wall all as specified and directed by engineer in charge . 26 material and labour for tvwiringwith rg-6 solid copper coaxial audio and video cable for tv antenna, satellite, dvr devices, safe for using in door and out door and drawn through pvc conduit upto required length,all as specified and directed by engineer in charge. 27 material and labour for telephonewiringwith 0.4mm pvc telephone switchboardcablefor telephone , safe for using in door and out door and drawn through pvc conduit upto required length, all as specified and directed by engineer in charge. 28 supply and fix telephone distribution box ,junction box with krone module for multiple connection, all as specified and directed by engineer- in- charge. 29 external water supplymaterial and labour for drilling and tapping gi/ci water mains (in position) for branch connection of 150/100mm including all fittings such as bend, elbows, tees, reducers and unions etc all as directed by engineer in charge. 30 supply and fix brass-metal, 100 mm diaglobe gate valves, with iron wheel head, screwed both ends for iron pipe all as specified and directed by engineer in charge 31 material and labour for construction of brick masonary valve chamber of size 900mm x 900mm x 600mm internal size including necessary earth work excavation, pcc 1:4:8 type d2 for foundation, brick work in cement mortar 1:4, pcc 1:2:4 type b1 for coping, 15mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3mm thick on 40 x 40 x6 mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangements complete all as specified and as directed. 32 material and labour for construction of brick masonary valve chamber of size 600x600x600mm internal size including necessary earth work excavation, pcc 1:4:8 type d2 for foundation, brick work in cement mortar 1:4, pcc 1:2:4 type b1 for coping, 15mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3mm thick on 40 x 40 x6mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangements complete all as specified and as directed. 33 external electric supplymaterial and labour for cutting road / hard standing to depth not exceeding 60 cm and to width not exceeding 45 cm for laying hdpe pipes and making good the disturbed surfacesby 1:3:6 type c1 using 20 mm graded stone aggregate complete all as specified and as directed. 34 supply, install, testing and commissioning of cpri approved lt panel outdoor type of size 1.5x1.2x0.60 mtr suitable size recommended by manufacturercubical floor mounted type (ip-65 degree of protection ) made out of 3 mm thick ms sheet duly painted with two coats of synthetic enamel paint powder coated, bus bar 200 amps rating made of aluminium strip (40x5mm) duly drilled holes for connections and mounted on epoxy based post insulatorsfor 3 phase 4 wire 415 volts 50 hz ac supply ,hibling , cable entry boxes , cable gland incl 50x50x6 mm frame (bottom portion of the panel), grouted by using foundation 1:2:4 type c1 with 20 mm graded stone aggregates totally tested as per iec 61439-i with the following accessories. 35 incomingmccb 125 amps 25 ka adjustable type 4 pole -01 no@ as in/comingoutgoing(i) mccb 63 amps 25 ka adjustable type 4 pole -03 nos@ as out/going (working-02 , spare-01)(ii) mcb 32 ampstpnamps adjustable type as per - 03 nos@ as out /going(working-02 , spare-01)(iii)multifunctional digital type timer switch230v 50 hz, single phase40amps cap with bay pass system including power cotactor suitable 40 amp mcb 40amps toggle switch cut out of40amps. (iv) powercontactor for rex timer switch 4 pole 40 amps -01 no(v)multifunctional digital type adwancedthree phase meter volt/amp/kva/kw/ +/- 1.0% rated current, auto and manual scrooling,site selectable ct/pt ratios 80/5 etc.housing in ms sheet 1.6 mm thick duly painted with enameled paint over a coat of primer complete in all respect all as directed & specified(vi) phase indicators led type set of 3 - r,y,b -o1 setnote :- foundationfor fixing of lt/feeder pillerboard in ground floor pcc (1:4:8) type b-1 using 20mm graded stone aggregate, measured and paid separately 36 supply and fix smc loop in loop out pvc water proofjunction box of internal size 200 x 140 x 95 mmincluding mcb 6 amps,b class ,connector necessary ms clamps, nuts & bolts with washers etc required at site all as specified and as directed. 37 material and labour for pvc insulated, pvc round sheathed multicore industrial cable of size 3 core,1.5 sqmmfor voltage grade upto 1100 v, as per is 694 all as specified and directed by engineer in charge. 38 returning and filling in two parts (i) using riddled soil obtain from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. note:- excavated soil shall be riddled by using sieve to separate composite particles etc as per is 1255 1983 and refilling in trenches as in cable cushioning. 39 supply and fix gi bracket made out of light grade pipe of size 40 mm dia 1.2 mtr long bent to shape including ms clamp of suitable size nut bolt washer for fixed along the wall/pcc pole with ms clamp etc complete all as specified and as directed. 40 supply and fix mccb 3 pole, 415 v, adjustable type, 125 amps with breaking capacity 25 ka, at existing lt panel and making good connectionwith nut bolts and washers and wire connections etc. to be fixed in theexisting tr panel complete all as specified and as directed. 41 m & l for earthing complete with gi earth plate electrode 60 cm x 60 cm x 6 cm thick buried directly in ground vertically at a depth not less than 2.25 m belownormal ground level with top level of earth plate at depth not less than 1.5 m below normal ground level surrounded form all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using 25x4mm gi stripby means of bolts, nuts, check nuts and washers of galvanized iron upto test pointand protected by gi pipe light grade 40 mm bore up to 7.5 mtr connected to a main switch board or main control board and gi pipe light grade 20 mm bore for watering and including funnel, wire mesh, 80 mm thick pre-cast rcc 1:2:4, type b-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4 kg/sqm in lieu of ci cover, pcc 1:3:6 type c2 pit / chamber including all necessary excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m all as specified and as shown in electrical plate no3 of mes schedule part – i of 2009.

Central Government/Public Sector

TRN :49059620 | 29 May, 2025

Tender Value : 0

Korba - Chhattisgarh

Tender for limited tender for furnishing work of chetma branch premise => limited; 1 wires/cables: only frls wires/cables are to be used strictly. 6 total for electrical works of branch & atm 11 total for computer networking of branch & atm

Corporations / Associations / Others

TRN :49061934 | 22 May, 2025

Tender Value : 8.31 Lacs

Palakkad - Kerala

Tender for e tender for the furnishing work at palakkad - 1 prelaminated board workl7 mm &9rnm board work - table wobk with one drawer & one cupboard etc...size5x2.5x2.5 feet(7 nos x 50 sqft=350 ) 2 prelaminated board work -side table -l7mm&9mm board work with double door size2.5x2x1. 5 feet (5 nos x 20 sqft =l0osqft) 3 prelaminated board worktable work - 17mm&9mm board work with one drawer&one cupboard etcsize 6x2.5x1.5 feet (2 nos x 60sqft = l2osqft) 4 prelaminated board workcash counter - l7mm&9mm.board workwith one drawer&one cupboard etc size 8x3.5x2.5(112 sqft) 5 prelaminated board work cash counter side box work17mm &9 mm board work with double door size:3 x2. 5x2 feet( 3 0 sqft ) 6 aluminium partition work manager cabin - powder coating2.5x1.5 inch section5 mm plain glass etc size:10 x13 ft &10x9.5 ft(130+95=225 sqft) 7 aluminium partition work -front sidepartition work 12mm glass worksize: 9.5x13.5=128 sqft 8 aluminium partition workcash counterwork. 2.5 x 1.5 inch aluminium powder coating sectionaluminium grill &5mm plain glass etcsize: 10x8 ft 2 nos(160sqft) 9 medium back revolving chair-computer chair 10 executive highback revolving chair 11 electrical and lan networkingclamp 20 mm (400 nos),20 mm pipe ivory lsl (80 nos) bend 20mm (150 nos), junction box (60 nos) cable 2.5 vguard 90 mtrs(4 nos)1.5 cable v-guard 90 mts(7 nos)1 , 0 mm cable v-guard 90 mts(6 nos) my linc plate 4 md(10 nos) surface box 4 md (10 nos)my linc plate 6 md (10 nos)surface box legrend 6 md(10 nos) .12 md plate legrend(10 nos)my linc plate 8md (8 nos)surface box legrend 8 md (8 nos)2 md sheet legrend(8 nos)surface box legrend 2 md (8 nos) one way switch mylinc (60 nos)20a switch mylinc (10 nos) 20a socket mylinc(10 nos)l6a 3 pin top (6 nos), 6a 3 pin top (2 nos)surfacd led round 15 watt(15 nos)led batern 4 ft lumns(7 nos)dry wall screws 1.25 inch (500) pvc grip 6 mm(700nos) 6 waytpn db havells (1 nos)mcb 6 /10/16/20(30 nos)rccb havells 40/30a(l nos) -lsolator40a (l nos),lnsulation tape (10 nos)fan hook (10 nos), 10a socket legrend(40 nos) 8 way db havells (1 nos)20a socket my linc (8 nos) elcb v-guard 40a (l nos) lloyd 3 star lnvertor air conditioner 1 ton(l nos)lynes linear light 4 ft 48 watt (8nos) ceiling fan 1200 crompton(7 nos) with lnstallation 12 loading and delivery charges

Boards / Undertakings / PSU

TRN :49067628 | 30 May, 2025

Tender Value : 0

Dhanbad - Jharkhand

Tender for purchase of miscellaneous items list attached , laying and jointing pvc pipe. heading , abir /kg (best quality) , alluminiun utensils in kg. (best quality) , baby receiving tray 18”x12” – steel / pc (standard quality) , battery big no. 1050 leak proof / pc (everyday/ nippo/duracell) , battery medium 1035 leak proof/ pc (everyday/ nippo/duracell) , battery small 1015 leak proof / pc (everyday/ nippo/duracell) , battery small 1012 r03 (aaa) leak proof / pc (everyday/ nippo/duracell) , biodegradable bags for120 ltr. bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , biodegradable bags for70 ltr. bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , biodegradable bags for 60 ltr.bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , blade shaving/ pkt of 05 pc. (willkingson /topaz/7o’clock) , bleaching powder / 25kg bag. isi marka , candle 200 gm (6 pc. packet) (standard quality) , coloured paper thin / zista (standard quality) , cup plate set bone china / set of 06 , detecto wall mounted / ft (standard quality) , display white board / sft. (standard quality) , display bord digital electric running/sft , door closer automatic standard– godrej / dorset/ pc , door matt 36”x18”coir / pc (standard quality) , door matt 36”x18”pvc grass type / pc (standard quality) , door matt 36”x18”rubber / pc (standard quality) , door matt 4’x2’ coir/ pc (standard quality) , door matt 4’x2’ pvc grass type (standard quality) , door matt 4’x2’ rubber / pc (standard quality) , four bins set 60 ltr.- different colour with trolley / set (standard quality) , french chalk / pkt. of 400gms (isi marka) , glass (water) set / set of 06 pc. (brocil/trew/xera) , hammer/pc (standard quality) , hawai chappal p.vc. front cut/ pair (standard quality)- rubber sole , hawai chappel different size / pair (relaxo/lakhni/bata/ajanta) - rubber sole , hight scale big size/pc. (standard quality) , hindalium utensil / kg (standard quality) , induction kettle for warm water and tea – 2 ltr. / pc. (standard quality) , induction suspen with cover – 2 ltr. capacity (standard quality) , iron utensils in kg. (standard quality) , g.i. box 60”30”30” 26g per pcs. , lifebouy soap 125gm / pc , liquid handwash 200 ml. (detol/lifeboy/savlon) , lock 50 mm / pc (linkatoot/link round , lock 65 mm/ pc (linkatoot/ link round , match box / pkt of 10 pcs. (home light/ aim) , measuring cup steel 200ml / pc (standard quality) , measuring cup steel 250 ml / pc (standard quality) , measuring cup steel 400ml / pc (standard quality) , mechanical height rod / ft (standard mark) , mixer grinder heavy duty 700 wt./ pc (bajaj/ havels/sumeet) , mosquito coil / pkt.(good night/maxo/mortein) , mosquito repellent machine / pc. – (good night, maxo, mortien, allout) , naphtahline ball / 100 gm pkt. (bengal chemical) , needle cum syringe destroyer 3 ltr./ pc. , nil blue / 900 gms pkt. (robin) , oxygen key / pc. , p.v.c. dustbin25 ltrs. in different colour / pc , plastic stool , donor questionnaire and consent form (new format double page double side printed , plastic chair witharm , plastic chair withoutarm , p.v.c. plastic water drum 100ltr. capacity with cover / pc.- cello, milton , p.v.c. plastic water drum 50ltr. capacity with cover / pc.- cello, milton , plastic bucket 20 ltr. capacity(cello, milton) / pc. , plastic dustbin with cover 60 ltrs./ pc- cello, milton , plastic mug – standard size 1000ml (cello, milton) / pc. , plastic tub 20” diameter best quality (cello, milton) / pc. , plastic waste bins 120 ltr. – different colour / pc. (neelkamal/ supreme ) , pressure cooker 10 ltr. – united, hawkins , prestige / pc , pressure cooker 5 ltr. – united, hawkins, prestige / pc , refill liquid for mosquito repellant / pc- good night, maxo, mortien, allout , rice keeping box – g.i. sheets 24g , 35”x20”x12” with cover / pc. (standard quality) , rice keeping box steel - 26g , 35”x20”x12” with cover / pc. (standard quality) , salai wrench for opening oxygen cylinder 10 inch / pc. (taparia ) , shoe boots different size/pc.(standard make) , shoe plastic/pc. , shoe rack steel big size/pc three self/pvc size- 36”x36”x15” , soda tata / 50 kg. bag (tata) , steel utensils / kg. (standard quality) , sutri / kg. (standard quality) , tea container – 10 ltr.capacity / pc. (maharaja/anapurna) , tools kit (speners, screw drivers set, slyrinch, pliers set + electric tester) / set (toparia) , torch 3 cell bras body (l.e.d.) / pc. (eveready/nippo) , urinal male /female / - steel /pc.- (standard make) adult , vimpowder 1000 gm for washing utensil / kg , wall mounting measuring scale / pc (standard make) , washing powder best quality 1000gm / kg. (ghari/panki/wheel active) , whiting / kg. (standard quality) , antivirus total security compatible for win7, win 8, win 10 with installation. quick heal, bit defender, kaspersky , aphaeresis consent from , aphaeresis register , arch file / pc , attendance register- 24 page per pc (bhakka) , blank c.d per pc (sony) , cartidges for toshiba e-studio 3518 a per pc , cartidges for workcentre pe 220 per pc , cartidges for xerox phaser 3260 , cartidges for xerox phaser 3020 , cartidges h.p 88a per pc (h.p) , cartidges h.p. 12a per pc (h.p) , cartidges toshiba 457per pc , cartidges for xerox versa link b 7035 per pc , cartidges h.p. laser mfp 1200 a per pc (h.p) , cartidges h.p. laser 108 a per pc (h.p) , cartidgesnpg- 76 black canon xerox machine. , cartidgeslaser shot lbp 2900b , cartidges pantum m660n , toner for work centre xerox machine model 415 per pc , toner for work centre xerox workcentre 5020 per pc , drum cartidges of xerox machine , drum of xerox machine with blade , clip file pvc per pc (standard quality) , cover file folding per pc (standard quality) , carbon paper –koresblue/ black , rubber stamp different size per pcs. , marking ink 30ml per pcs. , diet calculation register – 400pages. (standard quality) , dot pen cello griper per pc. (cello/ montex) , envelopbest quality 16”x12” per pc (best paper) , envelopbest quality brown paper 10”x4 ” per pc (best paper) , envelopbest quality brown paper with inside laminated 10”x4” per pc (best paper) , envelop best quality 11”x5 ½” per pc (best paper) , envelop coated with cloth 10”x12” per pc. (best paper) , envelop coated with cloth 12”x15” per pc (best paper) , file guard + file folding withprinted hospital name & monogram on cover long thread (best paper) , flat file standard size per pc. (best paper) , fly leaf cloth binding with monogram – as per our sample per pc. (best paper) , guard file 100 stick per pc. (best paper) , gum700 ml per bottle (camel) , marker pen – different color per pc. , office – t.pin per pkt , online ups- 4 kva2 hour backupwith complete installation – exide, microtech, sukam , online ups with inductive load with ½ hour battery backup.- exide, microtech, sukam , p.v.c. cover file bag per pc (best quality) , paper weight standard per pc. , pen drive for computer – 32 gb per pc. (h.p/sony/sandisk) , pen for white board per pc , pen whitener eraser per pc , pin- bell per pkt. (bell/ kisan) , plastic scale 12” , steel scale 12” , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -06 no. per pc(as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -08 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -12 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -20 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -30 no. per pc (as per our sample) , register component preparation 20 no.(as per our sample) , register component storage 20 no.(as per our sample) , register binding , patient’s cross matching register 20 no. , thalassemia pts. register 20 no. , donor defferal register 20 no. , whole blood stock register 20 no. , blood donor register 20 no. , patient’s grouping register 20 no. , donor gruping register 20 no. , master record register wb 20 no. , blood component stock register 20 no. , tti record register 20 no. , issue record register 20 no. , blood component discard register 20 no. , donor consent form both side printing 100 pcs per book , human whole blood/blood component single side printing book of 100 pcs. , color plastic coated labal crad with adhesive paper size 4”x3”per 100 pcs. , humen whole blood ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , packed red blood cell concentrated ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , random donor platelet concentrated ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , fresh frozenplasma ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , goods weight machine digital 50gm to 150 kg avove with stand havy duty- brand make per pcs. , stamp ink best quality 700ml per bottle , stamp pad self inking big per pc , stamp pad self inking medium per pc , stamp pad self inking small per pc , staplerbig24/10 per pc (kangaroo) , staplerbig24/6 per pc (kangaroo). , staplerbig24/8 per pc (kangaroo) , stapler pin big24/10 per pkt (kangaroo) , stapler pin big24/6 per pkt (kangaroo) , stapler pin big24/8 per pkt (kangaroo) , tag best quality per bundle , tape cutter per pc machine , white paper d.f.s. best quality per rim(500 sheets) (hanuman/ agro) , white paper s.f.s. best quality per rim (500 sheets)(hanuman /agro) , xerox paper white – a3 75 gsm per pkt (500 sheets) (century star/j.k) , xerox paper white – a4 75 gsm per pkt (500 sheets) (centurystar/j.k.) , xerox paper white – u-1 75 gsm per pkt (500 sheets) (century star/ j.k.) , anaesthetics note form single side printing century white paper– 11 ½” x 8” (book of 100 pc) (century 75gsm) , application cum consent form for sterilization operation book of 2 pages both side b/w (century 75gsm) , bed head ticket form double page both side printing- century white paper – size a3 (book of 100 pcs) (century 75gsm) , blood doner card for blood bank size – 5”x4” (100 pcs) (century 75gsm) , blood doner certificate card – multicolour printing for blood bank size 6”x6” plastic coated paper (100 pcs) (century 75gsm) , blood donor card with printing, best quality paper size 4”x6”(100 pcs) (century 75gsm) , blood donor questionnaire and consent form both side printing for blood bank- size 11 ½” x 8”. (book of 100 pc)(century 75gsm) , blood grouping label card group a, b, o,ab – size 5”x4”with adhesive sticker paper colour (100 pcs) (century 75gsm) , blood report form for blood bank 13”x8” .(book of 100 pcs) (century 75gsm) , born certificate form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , client dose sheets (o.s.t.) - century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , colour paper for blood bag 6”x6” (100 pcs) (century 75gsm) , cross match receipt book with duplicate copy for blood bank (100 original + 100 duplicate) per book (century 75gsm) , death certificate form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , department of pathology , obs.& gynae (bedside) – report form size a4 (book of 100pcs) (century 75gsm) , diet chart form a4. (book of 100 pc) (century 75gsm) , discharge ticket in best paper a4 general. (book of 100 pcs) (century 75gsm) , e.o.p.d. slip form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , flex banner multicolor with iron frame per sft.- with fitting (standard make) , flex banner multicolor without iron frame per sft.- with fitting (standard make) , for maternity facility case sheet of multiple coloured book of 11 pages both side as per sample/book (century 75gsm) , haemodialysisbook for patient plastic coated front & back page with 12 page 134mmx210mm (per book) (century 75gsm) , indoor continuation sheets form single side printing century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , injury report form best paper size 12”x7” with triplicate copy printing and winding and triplicate numberingfor surgery (book of 50 pcs) (century 75gsm) , investigation report form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , investigation report form for pathology both side printing – 11 ½” x 8” (book of 100 pc) (century 75gsm) , labor room register book of 100 pages as per sample/book (standard size & make) , medical record & check list for female /male sterilization book of 3 pages both side b/w (century 75gsm) , medico legal form single side printing century white paper for pathology& others departments11 ½”x 8” (book of 100 pc) (century 75gsm) , money receipt book of radiology, pathology, medicine,blood bank, office & others department(100 original + 100 duplicate) (century 75gsm) , monthly diet calculation register chart kitchen (book of 100 pcs) (century 75gsm) , name plate rewriting with materials per inch. stand with fitting (standard quality) , number writing of bed/roomper pcround/sq (standard quality & size 6”) , p.v.c. folder files inside pocket & clip with printing & monogram (per pc) (standard quality) , partograph chart form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , patient satisfaction survey-laqshya book of 100 pages b/w (century 75gsm) , pre-anaesthetic record form both side printing on yellow paper (book of 100 pc) (century 75gsm) , radiology report form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , blood requisition form for whole human blood i.p. single side printing- 11 ½ ”x8” for blood bank. (book of 100 pc) (century 75gsm) , risk bond form both side printing – century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , a4 size paper single side printing with paper , a4 size paper both side printing with paper , sign board painting & rewriting with material,iron & wood per sft. (standard quality & paints) , sncu bht format – set of 19 page (per set) black & white (century 75gsm) , sncu bht format colour with pocket plastic coated paper – set of 9 page (per set) (century 75gsm) , stock ledger for store printing & binding as per sample 450 page per pc.(as per our sample) , treatment chart form both side printing century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , wall painting and writing with materials per sft. (standard quality & paints) , wall painting with materials per sft. (standard quality & paints) , x-ray film envelops printed best paper -10 ½”x8 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper -9”x7” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 12 ½”x10 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 12 ½”x12 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 15 ½”x12 ½”. (per 100pc) (standard quality) , bed sheet 100”x60” exclusive cotton / pc (best quality) , bed sheet 108”x76” exclusive cotton / pc (best quality) , blanket red (weight 2 kg) / pc (best quality) , door for curtain synthetic/cotton printed best quality 48” / 6’x4’ stitching +ring +complete fitting(best quality) , door curtain fancy double layer with stitching +ring +complete fitting– per/ pc. (best quality) , donor questionnaire and consent form (new format double page double side printed , cotton clothes green cashment (dosuti) 46” permtr. (best quality) , markin cloth 48 / permtr. (best quality) , mosquito net cotton full bed size 7’x5’x3’ / pc (best quality) , pillow cover 17”x26” excl. cotton c flap / pc (best quality) , pillow with rubber foam standard size 16”x24” / pc (best quality) , tericot cloth- white / per mtr (best quality) , towel big size 29”x 58” / pc (best quality) , towel hand 15”x25” / pc (best quality) , eye towel green cloth material reusable - per/pc. , leggins reusable green cloth material standard size – per/pc. , surgeon cap reusable green cloth material– per/pc. , waste lillen bag standard size – per/pc. , connection pipe for wash besin /pc (standard make & quality) , drain pipe for wash basin/pc (standard make & quality) , plastic angle cock for bathroom /pc (standard make & quality) , plastic bib/piller cock for bathroom /pc (standard make & quality) , supply & fixing of overhead water tank capacity 2000 ltr. & making a platform with masonry enclosures / pc. , supply fixing & connection of necessary water pipe line including all required accessories size ½” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size ¾ ” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size 1 ¼ ” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size 1 ½” -p/feet, , supply fixing & connection of necessary water pipe line including all required accessories size 1 -p/feet, , supply fixing & connection of necessary water pipe line including all required accessories size 2 -p/feet, , supply fixing & connection of c.p. bib cock/c.p angle cockfor bathroom , supply fixing & connection of doctor c.p. bib cock/c.p angle cockfor bathroom , supply fixing & connection of halfa set , supply fixing & connection of fta/mta size ½” , supply fixing & connection of fta/mta size 1” , supply fixing & connection of fta/mta size1 ½” , supply fixing and connecting of valve – ½” complete set , supply fixing and connecting of valve – ¾” complete set , supply fixing and connecting of valve – 1” complete set , supply fixing and connecting of valve – 2” complete set , supply fixing and connecting of valve – 3” complete set , supply fixing and connecting of valve – 4” complete set , supply fixing installation & connection of wash basine / pc. , supply, fixing & connection of cistern for bathroom / pc. , frame work of anodized material per sqft. , bookcase four door book case,rigid knock down construction, prime quality crca steel – panels & frame. . each door is provided with transparent glass for clear inside vision secured in a metal frame through rubber gasket inside the top of respective compartment & ensures parallel and smooth movement. each door has a scissor mechanism for receding inside the tip of respective compartments. each door has plastic side end caps as handle which is easy to grip epoxy polyester powder coated.(catalogue must be attached with tender) (authorization required) , filling cabinet: four drawer filling cabinet – rigid knock down constructions easy to grip full length handle recess integrated into metal drawer having centralized locking and anti-tipping arrangement to ensure that when one drawer is opened for use, it does not allow other drawers to be opened. high quality precision ball slide.(catalogue must be attached with tender) (authorization required) , high back chair cushioned high back revolving chair, pu moulded cushion seat and back with arm .(catalogue must be attached) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , high back executive chair: high back executive chair – torsion bar mechanism, single seat & back, high density foam. (catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , medium back chair cushioned medium back revolving chair, pu moulded cushion seat and back with arm.(catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , executive office table- size in mm :- 1800(w) x 900(d)x 750 (h) material ;- block board (19mm) |(make: green ply/century ply/kit ply), is 1659:2004 and termite proof, covered with wood finish laminate thickness i mm (is 2046), set of one side drawers with anti-rust telescopic slider and anti-rust monolithic handle, and central locking facility. other side should have the storage box with two self and have a door with anti-rust handle and lock. all edges to be surrounded by teak bead and polished. (durian/ dumro/ zuari/ neelkamal (authorization required) , office table office steel tablemade of pre-laminated particle board with one side drawer unit , size- 4’x2’ approx. (catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , executive table made of pre-laminated particle board with one side drawer unit , size- 5x3x2.5 approx. (catalogue must be attached with tender)(make- durian/ dumro/ zuari/ neelkamal (authorization required) , sofa set three setter (make- durian/dumro/zuari/ neelkamal) (authorization required) , sofa set single setter (make- durian/dumro/zuari/ neelkamal) (authorization required) , six setter dining table with chari (make- durian/ dumro/ zuari/ neelkamal) (authorization required) , center table (make- durian/ dumro/ zuari/ neelkamal) (authorization required) , coir mattress 6.5 feet. x 3feet. , steel plain almirah – steel almirah. size – 78”x34”x19”x22g with locking systems apoxy coated colour.(catalogue must be attached with tender) (authorization required) , steel rack steel rack of 6shelves, size –height 6’ and panelsize – 72”x36”18” , 4+2 base and head, adjustable with sloted angle.(catalogue must be attached with tender) (authorization required) , three seater chair –black chrome plated.(catalogue must be attached with tender) (authorization required) , three seater chair –silver: chrome plated base. (catalogue must be attached with tender) (authorization required) , training chairs withgood quality and finish : student chair, fixed back, hd foam; prelaminated particle writing board, round crc pipe (catalogue must be attached with tender) (authorization required) , visitors chair with handle: full arm visitors chair, fb/capsule pipe mechanism, pu moulded cushion seat and back, capsule pipe crc base. white terycot cloth full back cover. (catalogue must be attached with tender) (authorization required) , revoling bar stool long size , aluminium partition with acp sheets (standard quality & make) , aluminium partition with glass/particle/jali (standard quality & make) , aluminium sliding for window & doors / sq. ft. (standard quality & make) , bht frame – standard steel / pc (12”x 15” standard make & quality) , carpet material with laying labour charges/sqft. (p.v.c. 1.5 mm standard quality & make) , collapsible gate grill with fitting and fixing/ kg(standard quality) , goods carrying trolley/ pc (standard quality & make) , waste segregation trolley 15 ltrs. foot operated double bucket in different colour / pc , baby cradle m.s. 36”x15”x39” with mattress / pc (authorization required) , back rest / pc (authorization required) , basin stand steel / pc (authorization required) , bed pan – steel / pc (standard size & make) , bed side bowl – steel / pc(22 g 18” standard size & make) , wheel chair (authorization required) , bed side screen fourfold with curtains. (authorization required) , bed side locker (authorization required) , wash basin stand (single)(authorization required) , obstetrics delivery table (3 section) (authorization required) , emergency trolley (authorization required) , dispenser stand with foot pedal (operated by pressing the foot pedal) (authorization required) (22 g 18” standard size & make) , dressing drum seamless15”x12” / pc (authorization required) (22 g 18” standard size & make) , dressing drum seamless 11”x15 / pc (authorization required) (22 g 18” standard size & make) , dressing drum seamless 9”x9” / pc (authorization required) (22 g 18” standard size & make) , iron safety gril for all purpose per sft. , eclamptiabed / pc (authorization required)(22 g 18” standard size & make) , examination couch with three upper box, three sliding drawers ,sliding footstep,b.p. apparatus tray & mattress standard size / pc (authorization required) (22 g 18” standard size & make) , foot rest standard sizem.s. / pc. (authorization required) (22 g 18” standard size & make) , foot step standard double m.s. /pc (authorization required) (22 g 18” standard size & make) , gadda for labour table thickness 3” / pc. (neelkamal/ sleepwel, kaulon) , gynae examination couch. (authorization required) , high end fibrebed semifowler (abs pannel) with mattress , i.v. rodand over bed table 6” wheel with side railing/ pc. (authorization required) , high end fibrebed semifowler (abs pannel) with mattress , i.v. rod / pc (authorization required) , i.v. stand s.s. with plastic base / pc. (authorization required) , instrument tray ss6”x8” with cover / pc (authorization required) , instrument tray ss 10”x12” with cover / pc (authorization required) , instrument tray ss 8”x10”with cover / pc (authorization required) , kidney tray big size / pc. (authorization required) , kidney tray middium size / pc. (authorization required) , kidney tray small size / pc. (authorization required) , labour table s.s. telescopic hydraulic height adjustable with mattress / pc. (authorization required) , mattress high density foam (40 density) – 4” for semifowler bed / pc (neelkamal/ sleepwel) , oxygen cylinder stand cum trolley standard / pc. (authorization required) , p.v.c. dustbin trolley with two wheel standard size 120 ltr. branded in different colour / pc (authorization required) , patient stool m.s. powder coated / pc. (authorization required) , pediatric bed with four sides railing & mattress / pc. (authorization required) , revolving stool with s.s. top. / pc (authorization required) , stretcher trolley approx. dimension 2010mm 1 x570mm w x 810 mm. h trolley made of s.s. tubular frame mounted on 200 mm dia four swivels castors. heavy duty with side railing s.s. , o2 cylinder carriage with mattress. / pc. (authorization required) , trolley instrument s.s. / pc. (authorization required) , trolley instrument s.s./ pc.(authorization required) , trolley medicine s.s. / pc. (authorization required) , trolley waste lilen standard size / pc. (authorization required) , ultra low volume fogger – 4 ltr. – 25000 rpm / pc. (authorization required) , verical blind with fixtures & installation/sqft. (standard quality & make) , weighing machine –paediatrics / pc , weighing machine – adult / pc , x-ray view box led / pc , 1.5 ton inverter split ac copper condenserwith installation/ pc. ( with standard warranty ) (catalogue must be attached with tender) (authorization required) , 2 ton inverter split ac copper condenserwith installation/ pc. ( with standard warranty ) (catalogue must be attached with tender) (authorization required) , d s l r camera – 24 mega pixel or more with high speed usb minimum shutter speed 1/4000 per second storage types sd/sdhc8/sdxc8 memory cards./ pc( with standard warranty ) (catalogue must be attached with tender) (authorization required) , geyser – copper –25 ltr / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required).- - havells, bajaj, voltas , geyser – copper – 15 ltr / pc ( with standard warranty ) (catalogue must be attached with tender) (authorization required) .- - havells, bajaj, voltas , inverter sinewave -1500 va/24 volt with double tubular battery 200 ah complete set–with installation & connection / pc. (authorization required).- microtech exide , led t.v. – 32 inch / pcbrand- sony, samsung, l.g.( with standard warranty ) (catalogue must be attached with tender) (authorization required) , photo copier machine – copy speed - 20 copy / min or above, display – 4line lcd display, warm up time approx 31 seconds or less, paper size – a3, a4, a5 (by-pass tray- a3,a4,a5,a6), memory – 256 mb ram, networking features – yes, resolution- 600dpi ( with standard warranty )/pc.(catalogue must be attached with tender) (authorization required) , photo copier machine – copy speed - 35 copy / min or above, display – 9” colour touch screen, warm up time approx 20 seconds or less, paper size – a3, a4, a5 (by-pass tray- a3,a4,a5,a6) memory –4 gb ram, networking features – yes, secure hdd – 320 gb, cpu – dual core ( with standard warranty ) / pc (catalogue must be attached with tender) (authorization required) , refrigerator – 175 ltr / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required).- l.g. samsung, voltas , refrigerator – 220 ltr. / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required). - l.g. samsung, voltas , refrigerator340 to 350 ltr. / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required). - l.g. samsung, voltas , freezer500 ltr and above /pc (authorization required)- voltas , deep freezer 500 ltr / pc (authorization required) - voltas , supply & fixing of tubular battery for inverter -200 ah,- exide , ups set for computer2kva / pc.- microtech , ups set for computer 1kva / pc. -microtech , ups set for computer 650 va / pc.- microtech , fully automatic washing machine 6 kg –pc( with standard warranty ) (catalogue must be attached with tender) (authorization required) l.g., sumsang , water purifier (r.o.) – 50 lph, 7 stage of purification and water recovery more than 55%. the manufacturer company should have iso 9001 , 14001 certified and service centre in dhanbad ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , water purifier (u.v.) – technical specification of water storage cooler cum inbuilt purifier :- water storage tank capacity – 120 ltr., no of faucets – 03. (two for cold & one for normal), storage tank material and body material-stainless steel 304, provision of last point purification (uv based), refrigerant- r134a, water recovery – 90-100% , manufacturer should be certified by iso 9001 certification for sales & service and 14001 for manufacturing., certificate of endorsement from indian medical association for manufacturer, and service centre in dhanbad (with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , water purifier r.o. + uv/ess with inbuilt cooling system with grilling , 60 lph, storage capacity – 80 ltr. with 08 stages of purification and water recovery more than 55% . the manufacturer company should have iso 9001 , 14001 certified and service centre in dhanbad ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , bulb led – 20 watt/ pc. brand- havells, bajaj, surya, crompton, panasonic , chemical earthing installation for machine equipment per pc , copper strip for earthing connection per mtr. , curtain pipe with steel clamp, ring supply & installation / rft. , fan capacitor (condenser) brand- usha/ universal. , glow sine board complete set with all fitting & fixing with material / sft. , hot air blower – electric – 2000 wt. / pc. brand- havells/ roxy/ bajaj/ crompton/ panasonic. , led tube light complete set 20 wt. / set brand- havells/ wipro/ bajaj/ great/ white surya, crompton/ panasonic , led tube light complete set 24 wt. / set. brand- havells/ bajaj/ surya/ great white / crompton/ panasonic , mcb box double pole – 32a with installation / pc. , mcb 32 a with installation / pc. , mcb 15a combind with installation / pc. , 6 a switch with installation / pc. , 6a socket with installation / pc. , 15 a top with installation / pc. , ordinary wire / coil , pedestal fan / pc. brand- havells/usha/khaitan/ bajaj/ polar. , slim led tube light36wt / pc. brand- havells/wipro/ bajaj/ surya/ great white/ panasonic , supply & fixing of battery for u.p.s. 12 volt / 650 va single / pc. - microtech, exide , supply & fixing of wall mounting fan/ pc. brand- havells/usha/khaitan/bajaj/ polar. , supply & fixing of wall mounting stabilizer double phase input to single phase output– 4 kva 90 /volte.- microtech, exide, opto , supply & fixing of wall mounting stabilizer double phase input to single phase output– 5 kva.90 volte. - microtech, exide, opto , supply & fixing of wall mounting stabilizer for a.c. digital 4 kva 90v suitable for 1.5 ton a.c.- microtech, exide, opto , supply & fixing of wall mounting stabilizer for a.c. digital 5 kva 90v suitable for 2 ton a.c. - microtech, exide, opto , supply fixing commissioning with necessary electrical connection of change over 100a /pc. , supply fixing commissioning with necessary electrical connection of change over 200a /pc. , supply fixing commissioning with necessary electrical connection of change over 500a /pc. , supply, fixing & necessary connections of ac box (metal body) complete set with mcb , supply, fixing, commissioning with necessary electrical connection ofbus bar – 100a /pc , supply, fixing, commissioning with necessary electrical connection ofbus bar – 200a /pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 100a/ pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 32a/ pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 63a/ pc , supply, fixing, commissioning with necessary electrical connection ofmain switch – 200a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch 400apc. , supply, fixing, commissioning with necessary electrical connection ofmain switch 500a per pc. , supply, fixing, commissioning with necessary electrical connection ofmain switch –– 32 a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch – 63 a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch –100 a / pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus bar-100a/ pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus-bar-200 a / pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus-bar400a , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus bar500a , supply, fixing, electrical connection & wall cutting with masonry enclosure ofheavy duty exhaust fan with installation and connection / pc , supply, installation & connection of isolation transformer 10 kva , supply, installation & connection of isolation transformer 5 kva , supply, fixing, commissioning with necessary electrical connection ofisulator /itpn200a/pc. , supply, fixing, commissioning with necessary electrical connection ofisulator /itpn400a/pc. , three phase cable wiring for machine equipments cable size- 25mmm sqmm. p/mtr. , tube light holder / pc , wire copper 3/20per coil , wire copper 7/20 per coil , computer – intel core i5 12th generation processor, ram: minimum 8gb or above, hdd : 01 terabyte or above, dvd writer, monitor – 19.5”, u.p.s. – full set ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , computer – intel core i5 12th generation processor, ram: minimum 8gb or above, hdd : 01 terabyte or above, dvd writer, monitor – 19.5”, u.p.s. – full set ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , laptop( core i5 12th gen, 8gb ram or more, 512gb or more ssd) (authorization required) , 2 in 1 laptop – core i5 12th gen, 8gb or more ram/ 128 g ssd/ 12.3 inch with windows 10, display- touch screen, sd card reader, 5 mp (1080p) front camera, 8 mp (1080p) autofocus rear camera, quad hd led backlit pixel sense touch screen display 10 point multi-touch, 3:2 aspect ratio. (authorization required) , printer laser- all in one laser printer (print,scan, copy & fax) , minimum – 33 ppm, memory – 32 mb, processor speed – 266 mhz or above, duty cycle – 10000 or above, paper tray can hold minimum 250 or above, both side copy capacity when both side printed paper inserted to copy, 33.6 kbps fax modem or above ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , printer laser-single function, minimum –25 ppm or above, memory – 32 mb, processor speed – 266 mhz or above, duty cycle – 10000 or above, paper tray can hold minimum 250 or above ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , scanner – a4, legal size( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , biometric finger print usb scanner suitable for aadhar based scanning , bio matric device (iris sensor)-iris scanner usb for aadhar authentication and ayushmand bharat. great for ayushman bharat yojna. provides faster scanning, larger depth of field, wider scanning angle and zero error rates. single iris scanner – usb. (authorization required) , 4g pocket router all sim supported - all 4g sim supported data card. it provides minimum up to 150 mbps speed.plug and play with intuitive web user interface adds to its smooth operation with up to 32 gb memory support. , bar code scanner-supported symbologies :- ean8, ean13, upca, upce, code 39, code 93, code 128, ean 128, codabar, i, intrleave 2 of 5, matrix 2 of 5, msi and all 1d bar codes. light source: - 650 mm laser, scan speed: - 300 scans/sec. scan type: - single laser , usb mso finger scanner(mini size) -all-in-one solution: superior performance enrollment, verification, and identification. government approved bio-metric fingerprint scanner for instant sim activation of all telecom operators. easy plug & play. no prior software installation required. auto detect in your respective application. , multimedia key board for computer / pc , optical mouse for computer (desktop) / pc , making roti tray g.i sheets 24g 60”x36”x6” per pcs , almirah / cabinent lock -painting. standard quality paints and materials. , almirah / cabinent lock -repairing & painting. standard quality paints and materials. , almirah / cabinent lock -changing. , bed iron- painting. standard quality paints and materials. , bed iron- repairing & painting. standard quality paints and materials. , bed side locker- painting. standard quality paints and materials. , bed side locker- repairing & painting. standard quality paints and materials. , bed side screen - painting. standard quality paints and materials. , bed side screen - repairing & painting. standard quality paints and materials. , cardiac bed - painting. standard quality paints and materials. , cardiac bed - repairing & painting. standard quality paints and materials. , dental chair – painting. standard quality paints and materials. , dental chair – repairing & painting. standard quality paints and materials. , examination table - painting. standard quality paints and materials , examination table - repairing & painting. standard quality paints and materials , file cabinet – painting. standard quality paints and materials. , file cabinet – repairing & painting. standard quality paints and materials. , food carrying trolley - painting. standard quality paints and materials. , food carrying trolley - repairing & painting. standard quality paints and materials. , foot step –painting. standard quality paints and materials. , foot step – repairing & painting. standard quality paints and materials. , steel almirah –painting. standard quality paints and materials. , steel almirah – repairing & painting. standard quality paints and materials. , glass painting . , goods carrying trolley -painting. standard quality paints and materials. , goods carrying trolley - repairing & painting. standard quality paints and materials. , installation of steel rod on metal hooks on the doors & windows for parda. , instrument cabinet – painting. standard quality paints and materials. , instrument cabinet – repairing & painting. standard quality paints and materials. , instrument trolley – painting. standard quality paints and materials. , instrument trolley – repairing & painting. standard quality paints and materials. , iron chair neted 3 seater – painting. standard quality paints and materials. , iron chair neted 3 seater – repairing & painting. standard quality paints and materials. , iron chair neted 5 seater – painting. standard quality paints and materials. , iron chair neted 5 seater – repairing & painting. standard quality paints and materials. , moulded chair 3 seater –painting. standard quality paints and materials. , moulded chair 3 seater – repairing & painting. standard quality paints and materials. , g.i. box painting , moulded chair 4 seater painting. standard quality paints and materials. , moulded chair 4 seater repairing & painting. standard quality paints and materials. , moulded chair 5 seater painting. standard quality paints and materials. , moulded chair 5 seater repairing & painting. standard quality paints and materials. , name plate painting , notice board – repairing , o.t. light stand – painting. standard quality paints and materials. , o.t. light stand – repairing & painting. standard quality paints and materials. , o.t. table – painting. standard quality paints and materials. , o.t. table – repairing & painting. standard quality paints and materials. , orthopaedic table- painting. standard quality paints and materials. , orthopaedic table- repairing & painting. standard quality paints and materials. , oxygen trolley – painting. standard quality paints and materials. , oxygen trolley – repairing & painting. standard quality paints and materials. , repair of aluminum door-fitting, fixing with all materials . , repair of aluminum windows - fitting, fixing with all materials. , repair of collapsible gate grill. , repair of door - fitting, fixing with all materials. (aluminum, wooden) , repair of window glass – fitting, fixing with all materials. (aluminum, wooden) , repair of windows - fitting, fixing with all materials. (aluminum, wooden) , repairing of damage mattress with rexene cover (foam where required) , revolving chair –wheel changing with painting , revolving chair – repairing & wheel changing with painting , revolving stool steel - repairing with painting , saline stand – painting. standard quality paints and materials. , saline stand – repairing & painting. standard quality paints and materials. , steel chair – painting. standard quality paints and materials. , steel chair – repairing & painting. standard quality paints and materials. , steel chair with writing pad – painting. standard quality paints and materials. , steel chair with writing pad – repairing & painting. standard quality paints and materials. , steel table painting. standard quality paints and materials. , steel table repairing & painting. standard quality paints and materials. , stretcher trolley / patient trolley -painting. standard quality paints and materials with wheal changing. , stretcher trolley / patient trolley - repairing & painting. standard quality paints and materials with wheal changing. , stretcher trolley / patient trolley - wheel changing. , stretcher trolley / patient trolley - repairing & wheel changing. , twin almirah – painting. standard quality paints and materials. , twin almirah – repairing & painting. standard quality paints and materials. , roofshading water proof metal sheets repairing per sft. , roofshading water proof metal sheets painting per sft. , inverter point wiring with all accessories per mtr. , necessary point wiring & others for machine equipments with all accessories size of wire –10 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 04 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 06 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 1.5 sq.mm / mtr. , re-installation of a.c. machine including old place wall packing, gas charging etc. complete job , repairing & fitting of ac voltage stabilizer single phase , repairing & fitting of ac voltage stabilizer double phase , three phase cable wiring for machine equipments , cable size – 35 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 95 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 120 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 300 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 50 sq.mm per mtr. , necessary point wiring & other, size- 2.5 sq. mm , bowl stand - painting. standard quality paints and materials. , bowl stand - repairing & painting. standard quality paints and materials. , medicine trolley- painting. standard quality paints and materials. , medicine trolley- repairing & painting. standard quality paints and materials. , steel rack big. - painting. standard quality paints and materials. , steel rack big. - repairing & painting. standard quality paints and materials. , steel rack small. - painting. standard quality paints and materials. , steel rack small. - repairing & painting. standard quality paints and materials. , labour table.- painting. standard quality paints and materials. , labour table.- repairing & painting. standard quality paints and materials. , visitor chair with cusuion.-painting. standard quality paints and materials. , visitor chair with cusuion.- repairing & painting. standard quality paints and materials. , revolving chair.- painting. standard quality paints and materials. , revolving chair.- repairing & painting. standard quality paints and materials. , book self almirah - painting. standard quality paints and materials. , book self almirah - repairing & painting. standard quality paints and materials. , steel stool- painting. standard quality paints and materials. , steel stool- repairing & painting. standard quality paints and materials. , over bed table. - painting. standard quality paints and materials. , over bed table. - repairing & painting. standard quality paints and materials. , steel chair - painting. standard quality paints and materials. , steel chair - repairing & painting. standard quality paints and materials. , repairing of – wheel chair , abspanel i.c.u bed.- painting. standard quality paints and materials. , abspanel i.c.u bed.- repairing & painting. standard quality paints and materials. , abs semi flower bed.- painting. standard quality paints and materials. , abs semi flower bed.- repairing & painting. standard quality paints and materials. , abs locker - painting. standard quality paints and materials. , abs locker - repairing & painting. standard quality paints and materials. , baby creadle - painting. standard quality paints and materials. , baby creadle - repairing & painting. standard quality paints and materials. , repairing of online ups – 1 kva , repairing of online ups – 2 kva , repairing of online ups – 4 kva , false ceiling with suitable lights- per/ sq. ft. , ply and sunmika work- per/ sq. ft. , floor carpetting – per/ sq.ft. , venyl flooring- per/ltr. , vertical swinds for window – per/ sq. ft. , draw sheet green cloth material reusable standard size – per/pc. , abdominal sheet green cloth material reusable standard size – per/pc. , roof shading waterproof metal asbestos sheet. – per/ sq. ft. , scissors for cloth cutting (shop scissors) , oxygen regulator , humidfier , perineal sheet green cloth material reusable standard size – per/pc. , surgeon apron green cloth material reusable standard size – per/pc. , surgeon kurta reusable standard size – per/pc. , surgeon pajama reusable standard size – per/pc. , surgeon mask green cloth material reusable standard size – per/pc. , surgeon gown impervious green cloth material reusable standard size – per/pc. , surgeon gown green cloth material reusable standard size – per/pc. , bed side screen curtain set of 3 green cloth material reusable standard size – per set , online ups- 2 kvawith battery 100 ah 6 pcs.with complete installation (excide/ microtech) , online ups- 5 kvawith battery 65 ah 15 pcs.with complete installation (exide, microtech) , online ups battery 100 ah , disposable paper plate big size , disposable glass , ball pen (multi colour) , induction cook-top (prestige, havells, bajaj) 2000w , change over – 625a , m.c.c.b 4k- 625a , ph cable 185sq mm , power d.b pannel fabrication 16 swg sheet 60”x30”x12” with 625a bur bar including painting plinth making internal pannel wiring cable socking etc. , survo control 20 kva (manual) , micro oven ( branded company) , cable tray per feet. (best quality) , battery for ups 60 ah with complete installation (excide/ microtech) (authorization required) , battery for ups 26 ah with complete installation (excide/ microtech) (authorization required) , cartridges for brother toner tn- b021 (original cartridge) , cartridges for xerox machine tn 225 (original cartridge) , cartridges for canon mf 3010 (original cartridge) , cartridges for toshiba toner e studio 2809a (original cartridge) , nebulizer machine (best quality) , fumigation machine (best quality) , stethoscope (best quality)

Central Government/Public Sector

TRN :49019556 | 28 Jun, 2025

Tender Value : 0

Pondicherry - Puducherry

Tender for supply of advanced high energy linear accelerator system 01 unit supply of advanced high energy linear accelerator system 01 unit for the department of radiation oncology , advanced high energy linear accelerator system – 01 unit , high energy linear accelerator system with srs-sbrt-gating systems with one year warranty. (for details please refer technical specifications document) , dosimetric qa systems including all hardware and software with licenses with one year warranty , hardware accessories and related turnkey works - chiller, printers, compressor, chiller piping, hvac, networking, ups & batteries, air conditioning with one year standard warranty. , four years extended warranty for the items 1.01, 1.02 & 1.03 , immobilization accessories required for patient treatment at the machine with one year standard warranty , other turnkey works including civil works, electrical works, firefighting, furniture & other accessory systems

Government Departments

TRN :49026423 | 13 May, 2025

Tender Value : 0

Hazira - Gujarat

Tender for tender for structure dismentaling work at pwh_crm1 2000167357 10 10 10 dismantling of structure 200 to email : hitesh.prajapati@amns.in contact : name : hitesh prajapati item details : * scope of work for vendor: -dismantling existing structures as per requirement. -tools, tackles, grinding m/c etc. -supply of manpower with proper ppes -welding m/c, cutting set, cylinders. -consumables like welding electrodes, grinding wheels. -supervisor in contractor scope -job to be done as per instructions by line in-charge only. * scope of work- amns:- - essentials like electricity, water etc. - crane and hydra will be provided if required. - scaffolding or man lifter will be provided if required. - vehicle will be provided for scrap loading and disposal work. - specific penalty for safety violation and non-performance by vendor. specific penalty for nonperformance by vendor and must be cardinally measured. amns safety rule and regulation as per company policy: • all the persons working at height for exhaust pipe dismantling job should be healthy and medically fit and must be certified by the hospital(cnh). • all the workers have authorized work at height valid pass. • work should be started only after taking authorized work permit. • toolbox talk must be delivery before starting the job on daily basic. • use certified portable hand electric machine. • use certified lifting tools <(>&<)> tackles <(>&<)> it should be check before every use. • the person who is working at height should wear certified double lanyard full body harness (safety belt) <(>&<)> locked safety belt (both clamp) with lifeline. anchoring point must be check before every use. • use only certified two lanyards connected in a y configuration, which allows one lanyard to be attached to an anchor point while the second lanyard is being moved to a new anchor point, thus providing protection from falls at all times. • ensure that all persons are wearing safety helmet, safety shoe, safety goggles, face shield and cut resistance hand gloves, full body shock absorber double lanyard safety harness (for jobs above 4 metre height) / for job bellow 4 metre height full body double lanyard safety harness without shock absorber to be used. • work should be carried out in close supervision of competent supervisor. • the working at height job should be allowed in daytime only • while handling or shifting job of dismantle exhaust pipes with crane ensure that certified lifting belt are used <(>&<)> check the belt condition before every use. ensure exhaust pipes are lift in horizontal balance load condition <(>&<)> ensure guide rope are properly tied with bundles. • while fabrication activity ensure crane movement. crane movement must be restricted at working area when ever needed <(>&<)> for that working area must be barricade with danger tape <(>&<)> also manual stopper to be provided on both side of crane rail track minimum 8 meter away from page 2 of 2 arcelormittal nippon steel india pvt ltd am/ns hazira plant 27th km, surat-hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976ftc013787 request for quotation number 6000133471 date 05.05.2025 submission date 13.05.2025 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq mr. venkat sai taneeru contact email venkat.taneeru@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details working area. • while fabrication activity near dsl side, ensure dsl power supply must be cut off <(>&<)> for that lototo must be taken for isolation of dsl power supply. • while fabrication activity ensure that ground area should be barricade with danger tape to avoid unauthorized entry in work area • while scaffolding needed for work ensure that it must be certified <(>&<)> also ensure crane movement <(>&<)> if required crane movement must be restricted at scaffolding area. • the working area need to be cleaned to avoid the slipping hazards. • ensure gas cutting spark should not be fall on any electrical wires, trench cover <(>&<)> on any flammable material for that all wires /trench cover must be cover with fire blanket <(>&<)> all flammable materials should be removed from work area before starting the job. • ensure highly flammable material should not be store near working area <(>&<)> if any it should be removed immediately before starting the job. • always carry fe near workplace. • never transport cylinders with regulators and hose attached unless a proper trolley or carrier is used with locking chains. • ensure loose cylinder should not be kept at shop floor. • no oxygen or acetylene gas shall be used for pressure testing purpose. • no oxygen or acetylene gas shall be used for cleaning purposes. • always use red hose for acetylene and blue / black for oxygen, be careful to see they are never interchange. sop no:- amnsil/crm/pwh/19/sop/05 hirac no:- amnsil/crm/pwh/16.7/hirac/39

corporations/Associations/Others

TRN :49026548 | 27 May, 2025

Tender Value : 15.15 Lacs

Baghpat - Uttar Pradesh

Tender for tender for providing led street light network in dark zone at iidc baghpat. - supply & fixing 90 w led street light having die cast aluminium body and diffuser with driver set suitable for 90 watt confirming to ip 66 protection complete in all respect with surge protection device. minimum cat aa (crompton/philips with 5 year warrenty against defects,damaged & missing)make: cormpton/philips/bajaj/wipro. 2 supply & fixing steel tubular pole 9.50 metre long designated 410 sp-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 3 s/f of street light junction box made of smc material complete with 4 way terminal block, cable gland etc. 4 s/f of 6 amp to 32 amp sp mcb (10ka) b curve 5 supply & fixing 32mm dia,1.20m long gi bend pipe with 02 nos. clamp of 50x6mm ms flat suitable for fixing street light on st pole including cost of men and t&p. 6 supply & fixing upsida logo plate(retro-reflective) on st pole including cost of clamp and nut & bolt as per design of e/i. 7 supply & fixing pole earthling of pole by inserting ms rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 swg gi wire including cost of all material, men and t&p. in industrial area as per upsida/uppcl technical specification. 8 s/e of d clamps of 38mm x 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint 9 supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including g.i. bolts/ spindle nuts etc.complete in all respect.as pre uppwd sch. no. 621 10 supply, sagging & tensioning of 6 swg gi earth wire including cost of material, men and t&p 11 suppy,laying & drawing of3x1.5 sq mm pvc insulated copper cable for street/flood lights connection in existing pipe/surface/air as required including cost of material, men and t&p. (havells/polycab/grandlay) 12 supplying and laying of 25 sq.mm 3.5 core aluminium conductor pvc insulated, armoured, served, sheathed cable 1100 v grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. uppwd sch 510(j)-507 13 supply and laying of 16 sq mm 2 core aluminium conductor pvc insulated , armoured , served ,sheathed cable 1100 v grade in existing pipe/surface/pole etc.( havells/polycab/grandley) schedule 501©-507 14 supply & fixing of 25 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect. 15 supply & fixing of 16 sq. mm 2 core cable socket/lug with insulated tape in cable termination complete in all respect. 16 supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 17 supply & fixing of 16 sq. mm 2 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 18 providing & fixing 35mm x6mm g.i. earth strip on surface or in recess including cost of gi saddle/al. alloy/cadmium/pvc fastener etc.plated iron screw etc. as required for connections. 19 supply and fixing of ms/gi clamp as per design suitable for fixing shackle insulator, made out for 50x6mm m.s. flat including nut, bolt & washer.(for tun and t-points ) 20 supply , sagging & tensoning of overhead line with insulated acsr weasel conductor including binding etc complete in all respects. 21 supply,sagging,tensioning,jointing and binding of acsr weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiai,men an t&p for proper completion of work . 22 cleaning & spray painting of st bend pole and power st pole ( upto 7 mtr height in case of shut down) with one coat of red oxide primerand two coat of aliminium paint/pu paint as per direction of engineer incharge including cost of all material, men and hydraulic cran,other t&p ( burger/nerolac/asian mark) 23 painting letter ( pole no. ) 2.5 cmm up to 8.0 cm size complete on street light pole/panel/other electrical properties under upsida including cost of all material , men and t&p. uppwd civilsor sch item mno.817, ch-26 24 supply & fixing of 16 mtr high mast shaft of approved make with rising system hot dip glavanized inside & out sidedip,heavingpolesheetthickness3mm.topdia minium 150 mm, bottom dia 360 mmbase plate 32 mm thicksuitable forwindvelocity asperis 875part 3& havingnocircumferentialweld,withaccessoriesfor highmastsuchasheadframesuitablefor6to12 luminaries&its controlgearboxes 1.5hppowertool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch,including making suitable foundationaspermanufaturedrawing/sitereuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (bajaj/philips/wipro/crompton/bp & approved make in uppwd) all respect (bajaj/philips/wipro/bp & approved make in ppwd) with upsida acrylic glow shine prescribed logo 25 supply & fixing of factory wired integral 200 w led flood light luminaries with die cast aluminium housing built with driver set confirming to ip 66 protection complete in all respect, cat.-aa (bajaj/philips/wipro/crompton/approved make in uppwd) with labour. 26 supply and fixing 25a tpn capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering insteument & instrument box with cts etc. complete in all respect. (with labour) 27 supply and wiring of submain with 2 number 2.5 sqmm frlsh pvc insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete. 28 supplying and laying of 16 sq.mm 4 core aluminium conductor pvc insulated, armoured, served, sheathed cable 1100 v on serface the cable run shall be fixed on ms clamps etc of suitable size or as directed by the e.i. grade at a complete in all respects cable laying in existing pipe. (havells/polycab/grandley) 29 supply & laying of 63 mm hdpe pipe isi marked along with all accessories like socket, bend, couple etc. confirming to is 14930 part il complete with fitting and cutting jointing etc direct in grownd 75 cm below ground level including excavition and refilling the trench but excluding sand cushining and protective covering etc. 30 supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 31 supply & fixing of 16 sq. mm size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. 32 supply & fixing of 50 mm dia gi pipe b class for climbing up the cable from ground to over head line lt pole complete with gl fitting including material, labour and t&p as per upsidc sch item no. 25a. 1(ls 6.0 mtr for each hm) 33 supply and laying of 32mm x6mm g.i. earth strip from earth electroded directly in the ground level as required on surface or in recess including cost of gl saddle/al. alloy/cadmium/pvc fastener etc.plated iron screw etc. as required for connections. (5m for each) 34 s/b of 40 mm dia x 4.5 mtr. long g.i. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 swg gi wire in g.i.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction e/i complete in all respect as per drawing uppwd sch. no. 701 35 supply & erection of stay set at 3.5 metres away from the pole complete with galvanised 19 mm dia x1.80 metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm g.i. stay wire etc. in 1:3:6 cement concrete complete in all respect. 36 supply & fixing of led light strip with driver on street light pole at central verge road no. 1 &2 including cost work t&p men and material complete in all respect. the led strip should be in tri colour as red, white and green (each colour 6 mtr.respectively.) with 01 year warranty against defects/damage/missing. 37 supply and wiring of sub main with 02 nos.of 2.5 sq.mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and t&p required for proper completion of work as directed e/i 38 fabrication, supply and fixing of work information board in m.s. frame made by 50mm dia square pipe of stainless steel grade ss-304 & 16 mm thick base plate with back supporting of bracing by ms flat of 25x6mm and 2.85 mtr long supporting leg made from 65mm pipe ss-304 grade with proper grouting arrangement. the board should be retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 meter from ground by providing 0.45x0.45x0.60 mtr cement concrete stone pad as per drawing enclosed.the borad should be installed within 07 day of signing of contract boand.)

Related Searched Keywords : electrical network

List of electrical-network Tenders

Tender for tender for construction of high yield drilled tube well (hydt) with supply & installation of electrical submersible motor pump set 1.5 hp with rising pipe line upto existing water tank, distribution network with stand post etc. phe work at kasturba gandhi balika vidhyalaya, bolba.

Tender for repair and maintenance damaged 33 kv cable and electrical breakdown including fault detection, localization, rectification underground cable network at butchery near asc kirby place shekhwati ckt no 2 from nariana 220 kv grid to shekhwati grid under

Tender for limited tender for furnishing work of chetma branch premise => limited; 1 wires/cables: only frls wires/cables are to be used strictly. 6 total for electrical works of branch & atm 11 total for computer networking of branch & atm

Get electrical network Tender Alert...

Related Searched Keywords : electrical network

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us