Filters

List of conductor-bar Tenders

List of latest conductor-bar Tenders in Indian Tenders. Click on any conductor-bar Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for conductor-bar Tenders.

All-Tenders (32)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35765989 | 10 Nov, 2025

Tender Value : 50.00 Lacs

Jalore - Rajasthan

Tender for supply of construction material - ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash patal 40 mm thick, glass, 3 mm. coarse glass, paint, enamel paste, dipping paper, 7 lime - for whitewashing (saw/bud), primer (for iron/wood), petroleum products

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35756804 | 10 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for universal batten with g-13 lamp holder for t-8 lamps 20watt single side connection as per zonal specification led2 feet x2 feet 42 watt electronic drive recess mountedfitting warmwhite oblique coolday white make philipsoblique wipro oblique cg oblique bajaj oblique surya andeqivalent ultra modern recess mounting luminaire highbrightness leds 42 watt led 6000k led green lamp 05watt make philips oblique wipro oblique cg oblique bajajoblique surya and equivalent led white lamp 05 wattmake philips oblique wipro oblique cg oblique bajaj obliquesurya and equivalent ledyellow lamp 05 watt makephilips oblique wipro oblique cg oblique bajaj oblique suryaand equivalent led red lamp 05 watt make philipsoblique wipro oblique cg oblique bajaj oblique surya andequivalent runway lamp 200watt as per zonalspecification aviation lights alumimium led neon as perzonal specification globe led as per zonal specification city 3 decorative wall light fitting make philips oblique wiprooblique cg oblique bajaj oblique surya and equivalent mcbdb 2 way make siemens oblique l and t oblique hageroblique abb and equivalent isolator 100 amps 4 pole tpnmake siemens oblique l and t oblique hager oblique abband equivalent change over swtich 63 amp 415 volt makehavells oblique legrand oblique abb and equivalent cableflexible copper conductor 23 oblique 0076 make finolexoblique rr kable oblique kei oblique polycabe and eqivalentas per buyer reqmt cable flexible copper conductor 14oblique 0076 make finolex oblique rr kable oblique keioblique polycabe and eqivalent as per buyer reqmt pvcround cable 3 core 23 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent pvcround cable 3 core 40 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent bid number gem2025b6797642 dated 31-10-2025 bid document1 120 1 1 250mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, 200mm exhaust fan plasticbody make bajaj oblique cg oblique sudhir and eqivalent, 150mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, ht barrel fuse 20 amp pkt of10 nos make denson oblique rashtriya oblique m-3 andequivalent, ht barrel fuse 10 amp 10nos pkt as per zonalspecification, barrel fuse suitable for ht 11 kv ratedcapacity 60 amps as per zonal specification, ht barrel fuse5 amp 10 nos pkt as per zonal specification, ht barrel fuse15 amp 10 nos pkt as per zonal specification, capacitor forcelling fan 2.5 mfd make universal oblique anchor andeqivalent, lugs copper alloy 150 sqmm make denseenoblique raychem oblique m-3 and equivalent, lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copperalloy 120 sqmm as per zonal specification, lugs copperalloy 70 sqmm as per zonal specification, lugs copperalloy 50 sqmm as per zonal specification, lugs copperalloy 35 sqmm as per zonal specification, lugs copperalloy 25 sqmm as per zonal specification, lugs copperalloy 240 sqmm as per zonal specification, lugs copperalloy 400 sqmm as per zonal specification, plug top 3 pin 5oblique 6 amp make anchor oblique schnieder obliquehager and equivalent, pinao socket 16 amp, 5 pin makeanchor oblique schnieder oblique hager and equivalent, 5amps socket make anchor oblique schnieder oblique hagerand equivalent, pvc batton holder make anchor obliqueschnieder oblique hager and equivalent, pvc angle holdermake anchor oblique schnieder oblique hager andequivalent, pvc pendent holder make anchor obliqueschnieder oblique hager and equivalent, modular fanregulator 1200 oblique 1400 mm make as per sample, thread bulb big led as per zonal specification, threadbulb small led make philips oblique wipro oblique cgoblique bajaj oblique surya and equivalent, pvc ceiling rose2 oblique 3 terminal make anchor oblique schnieder obliquehager and equivalent, insulation tape roll 38 mm x 25 mlong as per zonal specification, insulation tape roll 20 mmx 25 m long as per zonal specification, insulation tape roll15 mm x 25 m long as per zonal specification, insulationtape roll 25 mm x 25 m long as per zonal specification, ampere tape 15mm width as per zonal specification, pvcswitch board 8 feet feet x6 feet feet make presto plastoblique finolex oblique kalinga and equivalent, pvc switchbd 4 inch x4 inch make presto plast oblique finolex obliquekalinga and equivalent, pvc switch bd 7 inch x 4 inch makepresto plast oblique finolex oblique kalinga and equivalent, pvc switch bd 12 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc switch bdrectangular 8 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping15mm make presto plast oblique finolex oblique kalingaand equivalent, pvc cassing capping 20 mm make prestoplast oblique finolex oblique kalinga and equivalent, pvccasing capping 25 mm x 12mm make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping32 mm make presto plast oblique finolex oblique kalingaand equivalent, pvc conduit pipe 25 mm make presto plastoblique finolex oblique kalinga and equivalent, pvcconduit pipe 20 mm make presto plast oblique finolexoblique kalinga and equivalent, pvc flexible pipe 20 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 25 mm //bid details2 / 120 corrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 32 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, tarpentine oil make asian andequivalent, paint og of 04 ltr container make asian obliqueberger oblique dulux and equivalent, paint black of 04 ltrcontainer make berger oblique asian oblique shalimar andequivalent, synthetic enamel paint white of 04 ltrcontainer 1st grade make dulux oblique berger obliqueasian, timber scantling 1st class 50x50mm teak wood, timber scantling 1st class 100x50mm teak wood, plywoodcommercial bwr grade 7 feet x3 feet x12mm thick makearchid oblique globe oblique green ply and equivalent, prelaminated mdf board 8 feet x4 feet x 18 oblique 20 mmmake bhutan oblique novapam oblique green ply andequivalent, block board bwr 8 feet x4 feet x19 mm thickmake archid oblique globe oblique green ply and equivalent, ply wood bwr 8 feet x 4 feet x 12 mm thick make archidoblique globe oblique green ply and equivalent, ply woodbwr 8 feet x 4 feet x 6mm thick archid oblique globeoblique green ply and equivalent, ply wood one side teakface size 8 feet x 4 feet x 4mm thick archid oblique greenply and equivalent, ply wood bwr 8 feet x 4 feet x 4mmthick archid oblique globe oblique green ply and equivalent, pre-laminated mdf board 8 feet x4 feet x12mm bhutanoblique novapam oblique green ply and equivalent, headboard pf bed ply top as per zonal specification, foot boardof bed ply top as per zonal specification, timber scantling1st class 75mm x 40mm teak wood, timber scantling 1st coblique h oblique w 30mm x 25mm teak wood, timberscantling 1st class 25x50 mm teak wood, laminated sheet8 feet x 4 feet x 1 mm thick make green ply oblique kitoblique archid and equivalent, beading teak wood size4mm x40mm as per zonal specification, teak woodenbeading 12x25mm, teak wood beading 20x25mm, teakwooden beading half round 20mm as per zonalspecification, teak wooden beedings1 inch x1 inch x6 feetlong as per zonal specification, looking mirror size 365mm x 1220mm x 5mm thick make modi guard andequivalent, looking mirror size 380 mm x 760mm x 5mmthick modi guard and equivalent, mirror of size1200x600x5mm thick modi gurad oblique gold fish andequivalent, glass panes size 3 feet x2 feet x5mm modiguard and equivalent, pvc beading 4mm x 20mm as perzonal specification, pvc beading 4mm x 15mm as perzonal specification, pvc seat for chair varamdah as perzonal specification, pvc seat for chair dining jco feet soblique ors as per zonal specification, nails wire 75mm asper zonal specification, nails wire 100mm as per zonalspecification, nails wire 40mm as per zonal specification, nails wire 60mm as per zonal specification, nails wire50mm as per zonal specification, nails wire 25mm as perzonal specification, nailes wire 150 mm as per zonalspecification, ms screw 35 mm as per zonal specification, ms screw 50 mm as per zonal specification, ms screw20mm as per zonal specification, ms screw 25 mm as perzonal specification, ms piano hinges 50mm x 5 feet longeach pkt 100 nos as per zonal specification, steel screw35mm each pkt 100 nos as per zonal specification, steelscrew 3 oblique 4 inch flat head as per zonal specification, machine screw full thread 35mm each pkt 100 as per zonalspecification, machine screw full thread 20mm each pkt100 as per zonal specification, machine screw 75mm withnut 100 nos of pkt as per zonal specification, hinges ms 50 //bid details3 / 120 mm to 100 mm as per zonal specification, hexa bladedouble edge as per zonal specification, gi check nut32mm as per zonal specification, gi lock 6 levers foralmirah four 04 holes godrej pattern and equivalent, gilock 6 levers for almirah two 02 holes godrej pattern andequivalent, lock for cup board godrej oblique norexoblique priya and equivalent, gi elbow 3 way 32 mm as perzonal specification, thinner 4 ltr in each container asianand equivalent, varnish 4 ltr container asian andequivalent, touch wood 1 ltr container asian andequivalent, dendrite 1 kg in container pidilite andequivalent, fevicol make - pidilite and equivalent, copalvarnish make - peacock and equivalent, pila mati as perzonal specification, basanti colour powder pkt 10 gms asper zonal specification, black colour powder as per zonalspecification, brown clolur powder as per zonalspecification, sand paper no 60 10 mtr as per zonalspecification, panel pin 25mm as per zonal specification, panel pin 20mm as per zonal specification, hasp andstaple steel 100mm as per zonal specification, slidingwheel for glass shutter as per zonal specification, aluminium peg as per zonal specification, cp knob 40 mmas per zonal specification, tapestry cloth best quality asper zonal specification, cloth malmal white 1.2 mtr wideas per zonal specification, cloth green blaizer1.5 mtr asper zonal specification, latherised rexin cloth best qualityas per zonal specification, nylon tape newar 50 oblique 55mm width. best quality as per zonal specification, bowhandle 100 mm as per zonal specification, broom sticks forsweeping as per zonal specification, hard rubber shoe forchair verandah as per zonal specification, hard rubbershoe for steel table as per zonal specification, aluminiumsheet 22 gauge as per zonal specificationuniversal batten with g-13 lamp holder for t-8 lamps 20watt, led 2x2 42 watt electronic drive recess mounted, ultra modern recess mounting luminaire leds 42 watt led6000k., led green lamp 0.5 watt make :philips/wipro/cg/bajaj /surya, led white lamp 0.5 wattmake : philips/wipro/cg/bajaj /surya, ledyellow lamp 0.5watt make : philips/wipro/cg/bajaj /surya, led red lamp0.5 watt make : philips/wipro/cg/bajaj /surya, runwaylamp 200watt as per zonal specification, aviation lightsalumimium led neon as per zonal specification, globeled as per zonal specification, city 3 decorative wall lightfitting make : philips/wipro/cg, mcb db 2 way make :siemens/l&t/hager/abb & equivalent, isolator 100 amps 4pole tpn make : siemens/l&t/hager/abb, change overswtich 63 amp 415 volt make : havells/legrand, cableflexible copper conductor 23/.0076 as per buyer reqmt, cable flexible copper conductor 14/.0076 as per buyerreqmt, pvc round cable, 3 core 23/.0076 make : finolex/rrkable/kei, pvc round cable, 3 core 40/.0076 make :finolex/rr kable/kei, 250mm exhaust fan plastic bodymake:bajaj/cg/sudhir & eqivalent, 200mm exhaust fanplastic body make : bajaj/cg/sudhir & eqivalent, 150mmexhaust fan plastic body make : bajaj/cg/sudhir &eqivalent, ht barrel fuse 20 amppkt of 10 nos make :denson/rashtriya/m-3, ht barrel fuse 10 amp10nos pktas per zonal specification, barrel fuse suitable for ht 11kv rated capacity 60 amps, ht barrel fuse 5 amp10 nospkt as per zonal specification, ht barrel fuse 15 amp10nos pkt as per zonal specification, capacitor for cellingfan 2.5 mfd make : universal/anchor, lugs copper alloy150 sqmm make : denseen/raychem/m-3 , lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copper //bid details4 / 120

Central Government/Public Sector

TRN :35733237 | 19 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for lv1 vt-72b 5340-174932 belt drg no 54-27-014 lv1vt-72b gost-16214-70 1 clamp strip 15x021 trmodra lv1 vt-72b 1548-248-295 gasket 100x82x212 lv1 vt-72b 1181-31-9112 pipe with connection lv1 vt-72b1102-62-0160 piston lv1 vt-72b 5340-174933 belt drgno 54-28-27sb lv1 vt-72b 1181-45-0016 idler gear pin lv1 vt-72b 1181-78-9203 pipe lv1 vt-72b 1181-78-9158 connecting body lv1 vt-72b 1181-78-9207 pipe lv1 vt-72b 1181-91-9206 stirrup with lock lv1 vt-72b 1181-78-0446 banjo bolt lv1 vt-72b 1181-78-9081closure lv1 vt-72b 1181-78-9082 closure lv1 vt-72b 1181-78-9089 pipe lv1 vt-72b 3040-022397 flangedrg no 1181-57-0021 lv1 vt-72b 1221-31-9101 pipe lv1 vt-72b 1181-34-9100 air filter lv1 vt-72b 1221-70-9100 dvrs instrument panel lv1 vt-72b 1181-70-0255 gasket lv1 vt-72b csn-02-2930 105 ring 105 lv1 vt-72b d1-1-9-00-00-03 gasket lv1 vt-72b 1181-70-0326 hose lv1 vt-72b svp1-s23 01-0 electrohydraulic servo valve lv1 vt-72b svp 1-s20 01-0electro hydraulic servo valve x2 vt-72b misc-1181-70-9309 plug z6 vt-72b 1181-70-9221 1 conductor c352 z6 vt-72b misc-086233 socket g-std is lv1 vt-72b 0175-50-009 spacer bush lv1 vt-72b 138-s70 c2var 050 printed wiring board lv1 vt-72b 1181-91-9203 rod lv1 vt-72b 1181-91-9212 holder lv1 vt-72b 1211-95-9138 spanner for valve h1 h2 lv1 vt-72b 1211-95-9145 socket wrench lv1 vt-72b 1172-70-1028 device lv1 vt-72b 5310238798 nut m20x15 spcnno stn-02-1412-05 lv1 vt-72b 5310-238801 nutm12x125 spcn no stn-02-1402-55 lv1 vt-72b4730077691 plug m18x15 drg no 1172-00-3077 lv1vt-72b 5306056860 bolt m20x15x78 drg no 960-243 lv1 vt-72b 2910160034215 filter drg no 701-06sb-183 bid number gem2025b6833265 dated 29-10-2025 bid document1 93 1 1 , lv1 vt-72b 9649999997 container water 40 litres, x2 vt-72b vs-16-2602-a8 switch breaker machanical, x2 vt-72b misc-1226-70-0004 fuse 60a, x2 vt-72b misc-naz-604-010sp button, x2 vt-72b misc-1183-70-0127front shield, x5 vt-72b misc-21-13-122 bulb 2.5v0.25a, x5 vt-72b misc-54-26-043-1 bulb 28v 5w, x5 vt-72b misc-tu37-003-749-76 head light fg-127, x5 vt-72b misc-npn blub halogen h3-24-70w pk 22s, y3 vt-72b misc-stn-34-6541 insulating tape black 15 mm, y3vt-72b misc-tdp-032-62 pvc tape 15x0.20c, z1 vt-72bmisc-1172-70-1080 glass temperature control, z1vt-72b misc-rio t-143 resistor odpor r6, z1 vt-72bmisc-1226-70-9107 positive wire, z1 vt-72b misc-bn-733375-15-09 1 diode byp 680-300r, z1 vt-72b s13-365-030ty transistor p215, z1 vt-72b misc-schm3-365-037tu transistor p 210a, z6 vt-72b misc-1221-70-0123emergency panel new version, z6 vt-72b misc-k-35-933-co pcb, z6 vt-72b misc-k-50-725-co -k-50-726 cojoy stick 011 012, z6 vt-72b misc-rsg-10m1-040sbcover assy, z6 vt-72b misc-vd-8-955-001 filter withyellow lens, z6 vt-72b misc-csn-34-6551 insulatingtape, z6 vt-72b misc-kpk-11-2-000-tu sat of controldevice 11-2, z6 vt-72b 1053-95-9103 1 outsidestarting cable, z7 vt-72b rus-al-8-892-031 wrenchspanner, v5 vt-72b 1240-002457 filter lightabsorbing, v5 vt-72b 6650-006180 filter lightoptical instrument, lv1 vt-72b 1226-91-9100 box forspta 1st external, lv1 vt-72b stn 23-0777 monkeywrench 30, lv1 vt-72b 1181-91-9112 bracket, lv1 vt-72b 1181-91-9245 funnel, lv1 vt-72b 1181-88-9118 pinassy, lv1 vt-72b 1183-91-1093 hook, lv1 vt-72b 729-93-sb-70 pin 25 w ith lock, lv1 vt-72b 729-93-sb-15universal wrench, lv1 vt-72b 19-28-296-1 cces list cs 372 insert, lv1 vt-72b 1172-00-3051 plug m 18x1.5, z6 vt-72b ba20-is-170 sb panel, z7 vt-72b 5365-183387spacer sleeve drg no al6-210-027 cb, lv1 vt-72b1181-83-0006 rope, lv1 vt-72b 1181-58-9173 rope, lv2slk 258103-p29 cotter pin 8x100mm, lv2 slk 258 056 2cotter pin 3.6x40, lv2 slk 351-06 6 ces-219 ring13x16, lv2 slk gost b 18644-73 end piece, lv2 slkgost-5918-73 1 nut m16-4-019, lv2 slk 763419 specialscrew, lv2 slk pp-3 squib, lv2 slk 1704-ma-g 3 lightmarker gst-64k, lv2 slk 4911-10 case firstaid kit no4911-65, lv2 slk 757-16-11-675 wrench special, lv2slk br5-886-022 filter t 1.50, lv2 slk 575- 16-14-875 1casing for feeler gauge, lv2 slk 7798-70 cces-543bolt 2m 12x65.36.019, lv2 slk 575-1240050 major atracked link assy, lv4 slk 01-167 2a10 link doorassy, lv2 slk 5297050-gost-397-79 coter pin vehcont linkage3.2x20.016, lv2 slk 575-1611-700 socketwrench s-14, lv2 slk gost 882-64 feeler gauge no 2blade type, lv2 slk 4898-10 gun grease, lv2 slk 575-10-41-008 bar support assy, lv2 slk 575-1614150cross bar assembled, lv2 slk tn28-40-1 bulb 28v40w head light, lv2 slk 7810-0397 gost 17199 screwdriver, lv2 slk 7810-393 gost 17199- screw driver200 mm, lv2 slk 7798-70 ces- 544 bolt2 m 12x25, 019, lv2 slk 575-16-11-675 special wrench, lv2 slk 575-1614-645 puller for coupling sleeve, lv2 slk gost -5915-70 nut m6-4.019, z6 misc p15m.3s.070 plate, z6misc p15m.3s.280 cover, z6 misc pf1.280 plate, z6 miscphe22, 27b relay, z6 misc pht.055 wire resistance, z6misc bas6.250 unit, z6 misc bas6a.030 unit, z6 miscbas6a.040 unit, z6 misc edm 14.010 armature, z6 misc //bid details2 / 93 elea 685211.513 brush, z6 misc b13.110 plug, z6 miscb13.220 unit, z6 misc b13.240 unit, z6 misc b13.310unit, z6 misc bas6a.020 unit, lv1 r90 bky.075transporting cap, z6 kvd nnk clr gost520.89 2398.20bearing 76-80029 2s2, z7 r90 rus-odo-335-451-ty ictube ep6, k9 t90s nbc ee 2-323-000 cii detector, z6r90 175000511060 unit hyd booster, lv1 r72 172-36-001sb-1 pre-heater 172-36-001sb-1, z6 r72 misc-t-72-035-sb-109 induction sensor, k9 t-72 nbc 99997204495101190000009 roentgenometer 102, z6 r72 bk2-369-113unit gyro, lv3 icvs sb-20-27-00-4 fuel injection pump fip, lv3 icvs sb-20-27-09 delivery valve assylv1/vt-72b 5340-174932 beltdrg no 54-27-014, lv1/vt-72b gost-16214-70/1 clamp strip 15x0.21 tr.modra, lv1/vt-72b 1548-248-295 gasket 100x82x21.2, lv1/vt-72b 1181-31-9112 pipe with connection, lv1/vt-72b1102-62-0160 piston, lv1/vt-72b 5340-174933 belt drgno 54-28-27sb, lv1/vt-72b 1181-45-0016 idler gearpin, lv1/vt-72b 1181-78-9203 pipe, lv1/vt-72b 1181-78-9158 connecting body, lv1/vt-72b 1181-78-9207 pipe, lv1/vt-72b 1181-91-9206 stirrup with lock, lv1/vt-72b1181-78-0446 banjo bolt, lv1/vt-72b 1181-78-9081closure, lv1/vt-72b 1181-78-9082 closure, lv1/vt-72b1181-78-9089 pipe, lv1/vt-72b 3040-022397 flange drgno 1181-57-0021, lv1/vt-72b 1221-31-9101 pipe, lv1/vt-72b 1181-34-9100 air filter, lv1/vt-72b 1221-70-9100dvrs instrument panel, lv1/vt-72b 1181-70-0255gasket, lv1/vt-72b csn-02-2930 105 ring 105, lv1/vt-72b d1-1-9-00-00-03 gasket, lv1/vt-72b 1181-70-0326hose, lv1/vt-72b svp1-s23/01-0 electro hydraulicservo valve, lv1/vt-72b svp 1-s20/01-0 electrohydraulic servo valve, x2/vt-72b misc-1181-70-9309plug, z6/vt-72b 1181-70-9221#1 conductor c 352, z6/vt-72b misc-086233 socket g-std is, lv1/vt-72b0175-50-009 spacer bush, lv1/vt-72b 138-s70 c2 var050 printed wiring board, lv1/vt-72b 1181-91-9203rod, lv1/vt-72b 1181-91-9212 holder, lv1/vt-72b 1211-95-9138 spanner for valve h1 & h2, lv1/vt-72b 1211-95-9145 socket wrench, lv1/vt-72b 1172-70-1028device, lv1/vt-72b 5310238798 nut m20x1.5 spcn nostn-02-1412-05, lv1/vt-72b 5310-238801 nut m12x1.25spcn no stn-02-1402-55, lv1/vt-72b 4730077691 plugm18x1.5 drg no 1172-00-3077, lv1/vt-72b 5306056860bolt m20x1.5x78 drg no 960-243, lv1/vt-72b2910160034215 filter drg no 701-06sb-183, lv1/vt-72b 9649999997 container water 40 litres, x2/vt-72bvs-16-2602-a8 switch breaker machanical, x2/vt-72b misc-1226-70-0004 fuse 60a, x2/vt-72b misc-naz-604-010sp button, x2/vt-72b misc-1183-70-0127 frontshield, x5/vt-72b misc-21-13-122 bulb 2.5v/0.25a, x5/vt-72b misc-54-26-043-1 bulb 28v/5w, x5/vt-72bmisc-tu37-003-749-76 head light fg-127, x5/vt-72bmisc-npn blub halogen h3-24-70w pk 22s, y3/vt-72bmisc-stn-34-6541 insulating tape black 15 mm, y3/vt-72b misc-tdp-032-62 pvc tape 15x0.20c, z1/vt-72b misc-1172-70-1080 glass temperature control, z1/vt-72bmisc-rio t-143 resistor odpor r6, z1/vt-72b misc-1226-70-9107 positive wire, z1/vt-72b misc-bn-73/3375-15-09/1 diode byp 680-300r, z1/vt-72b s13-365-030tytransistor p215, z1/vt-72b misc-schm3-365-037tutransistor p 210a, z6/vt-72b misc-1221-70-0123emergency panel new version, z6/vt-72b misc-k-35-933-co pcb, z6/vt-72b misc-k-50-725-co &-k-50-726 cojoy stick 011 & 012, z6/vt-72b misc-rsg-10m1-040sbcover assy, z6/vt-72b misc-vd-8-955-001 filter

State Government

TRN :35740326 | 10 Nov, 2025

Tender Value : 45.00 Lacs

Sikar - Rajasthan

Tender for material supply - ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash patal 40 mm thick, glass, 3 mm. coarse glass, paint, enamel paste, dipping paper, 7 lime - for whitewashing (saw/bud), primer (for iron/wood), petroleum productsin gram panchayat binjasi ps dhod for mgnrega and other scheme in financial year 2025-26 binjasi 04

State Government

TRN :35740492 | 16 Nov, 2025

Tender Value : 50.00 Lacs

Bharatpur - Rajasthan

Tender for supply of civil constriction goods - ghadla/kankar/jhajhra mortar - clay/mud mixture kiln lime for lime masonry work cement ppc white cement fine aggregate sand/gravel gravel - local fly ash surkhi stone dust (for masonry use) gitti stone/brick (for other than road work) 40mm stone crushed (hand-crushed grit) (voids cut 1/11) 40mm stone crushed (crushed) (voids cut 1/11) 20mm stone crushed (crushed) 12/10/6mm stone crushed (crushed) brick crushed road material (including 5 km lead) 63-40mm hand-crushed stone crushed (voids cut 1/11) 90-45mm hand-broken stone aggregate (1/11" voids cut) quarry rubbish (1/6" voids cut) gravel (1/6" voids cut) kankar (1/6" voids cut) binding material (pi 4-6) (1/6" voids cut) brick (22.5 x 11 x 7.50 cm) first class (1st class) second class (2nd class) soling/kharanja/masonry stone masonry berada (rr) masonry rubble (cr) kharanja soling (for floor work up to 15 cm height) kharanja soling (for road/kharanja work up to 23 cm height) stone arch (width 10-12", length 2-3', thickness 2.5-3.5") stone arch (flaky material) (3-4" thick & length, 1-2" width) sandstone (dpc, sill, coping, lintel, stand, almirah, etc.) up to 25mm thick up to 25-40mm thick up to 40-50mm thick up to 50-75mm thick up to 75-100mm thick up to 100-150mm thick flooring/strip paving catalog stone flooring catalogs up to 35mm thick, min. 3 sqft or more area catalogs for strip paving 60-75mm thick, min. 3 sq ft or more area unpolished rough kota stone up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm polished kota stone (one side polished) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble stone (makrana adanga 20 mm thick) 901 to 2300 sq cm up to 900 sq cm more than 2300 sq cm marble chips marble powder marble stone (rajnagar ii quality/local 20 mm thick) 901 to 2300 sq cm up to 900 sq cm more than 2300 sq cm stone frame single patam size 100 x 75 mm. double patam size 125 x 75 mm. stone slabs up to 1.5 m length, minimum 40 mm thick 1.5 m to 2.4 m length, minimum 50 mm thick 2.4 m to 3.0 m length, minimum 65 mm thick above 3.0 m length, minimum 75 mm thick precast tiles / blocks glazed size - 30 x 45 cm mosaic size - 40 mm thick vitrified size - 60 x 60 cm interlock tiles/bricks/blocks for road work cement interlocking block m-30 grade, 60 mm thick cement interlocking block m-30 grade, 80 mm thick cement interlocking block m-30 grade, 100 mm thick fr pvc insulated copper conductor single core cable, isi marked 1.50 sq mm 2.50 sq mm 0.50 sq mm 1.00 sq mm 4.00 sq mm 6.00 sq mm local wood with fittings (for doors, windows, and furniture) mango acacia other factory-made doors (30 mm thick, solid core, single-pane) structural steel iron (tor steel fe 415/500 for reinforcement) winding wire 18 gauge iron girders conical iron/square rebar/patti/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strand/12 gauge wire and 14 gauge strand/14 gauge mesh iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick glass 3 mm thick glass paint enamel paint distemper (water bound) lime - for painting (saw / bud) primer (for iron/wood) petroleum products diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) gi sheet 24 gauge (0.63 mm) ms sheet 22 gauge (0.80 mm) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick gi sheet 22 gauge (0.80 mm) asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) green & yellow litheroof expo sheet (183x90) pipe gi 15 mm diameter (b class) gi 20 mm diameter (b class) gi 25 mm diameter (b class) ac 75 mm diameter ac 100 mm diameter pvc 90 mm diameter (with ring) pvc 110 mm diameter (with ring) pvc 140 mm diameter (with ring) pvc 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. orrisa w.c. european w.c. foot rest porcelain urinal with lipped hole (430350300mm) coupling, bracket, and pvc waste pipe washbasin (450x300mm) with coupling, bracket, and pvc waste pipe stone beam (sw) pipe 100 mm diameter, 0.6 m long cp pillar cock (15 mm diameter) (is mark) cp bib cock (15 mm diameter) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter 1000 mm diameter 750 mm diameter 600 mm diameter 450 mm diameter 300 mm diameter steel conduit (isi marked) 20 mm diameter 25 mm diameter charcoal pvc water tank with cover ( (conforms to is:12701-1989) 13/0.20 mm twin core pvc sheathed flat flexible copper cable steel fasteners 6 mm x 75 mm pvc conduit, isi marked 25 mm diameter 20 mm diameter junction box 20 mm two-way 20 mm one-way 25 mm two-way 20 mm one-way (pvc) module gi box for 3 modules for 2 modules module base and cover plate for 2 modules for 3 modules modular switch, one-way, isi marked sp 15/16 ampere sp 5/6 ampere modular socket outlet, isi marked 3 pin 5/6 ampere 6 pin 15/16 ampere mcb db 2+2 they, spn, siunder mnrega and other scheme for session 2025-26 gram panchayat mundiya panchayat samiti nagar

Central Government/Public Sector

TRN :35729499 | 18 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for 10304489 lv6 mt6 2547 0913 5828 rubber hose scoopto tc 10351478 lv7 mpvy x 1102213 oil flinger 10351971 lv7 mpvy f 2400322 selector fork 1 2 10383768 k7 ikg bum bj 65 x 22 hammer sledgedouble face 6 5kg 10376863 k7 5305 011622 screwmild steel for cap je 10 10386928 k7 ikg bum bur 2016 head light 10383786 k7 ikg bum bj 65 x 24 barcrow with chisel and claws 8 kg 10379091 k7 f8600650 braided hose 60 mtr 10377967 k7 4210000079 adopter 100mm 4 female screw 10381136 k74210 000002 basket strainer suction100mm 4 10547348 k7 4210 000034 coupling instantaneousfemale 63mmx70mm 10383095 k7 4210 000571 brktext fire vapourising liquid halon 10381306 k7 ikgbum bur 21 24a front glass rh wind screen atulfuff 10381691 k7 4020 000222 rope manila 51mmcircum 30 mtr long 10341361 lv7 av 15 578 003 162252 28 fuse 10335309 lv7 av 15 578 003 101 752 16ring 10331499 lv7 av 15 578 003 109 952 85 packing 10332971 lv7 av 15 324 971 001 700 nut km 17 10348351 lv7 av 15 578 003 100 752 34 packing piece 10346885 lv7 av 15 578 003 107 952 38 reductingsocket 10335062 lv7 av 15 347 223 352 240 bulb 24v21w 10348601 lv7 av 15 578 903 912 452 60 oil guage 10565108 lv7 av 15 309 543 181 032 screw 10324158lv7 av 15 578 003 008 852 16 lamellas carrier 10326973 lv7 av 15 1102 01 0045 elastic ring 10314010 lv7 av 15 578 003 928 752 62 pipe 10311943lv7 av 15 578 003 914 552 30 bracket rear viewmirror 10328838 lv7 stln vf 5120 423974 p 2612547wrench socket 10340601 lv7 t 815 130 076 856 344tube and fittings metallic 10344389 lv7 t 815 5120410392 wrench open end 413 311 013 172 10333097 bid number gem2025b6829264 dated 28-10-2025 bid document1 145 1 1 lv7 t 815 443 965 621 003 bent tube, 10328552 lv7 t815 443 317 038 109 axle signal lamp, 10312481 lv7 t815 130 077 770 044 plus terminal, 10327074 lv7 t815 442 077 770 034 minus terminal, 10323243 lv7 t815 443 934 822 800 elastic ring, 10324410 lv7 t 815442 051 130 244 sealing washer, 10327370 lv7 t 815442 964 300 034 front covering bar 303mm, 10331640 lv7 t 815 443 654 002 000 hose tu 40 4x280dkl dkl, 10312685 lv7 t 815 130 054 161 914 rubberpacking, 10342871 lv7 t 815 443 857 044 002 sevenpole socket, 10319999 lv7 t 815 101 111 014 834sealing ring 280x3, 10325054 lv7 t 815 442 076 631664 surplus oil return tube, 10327899 lv7 t 815 443962 501 054 lid, 10346248 lv7 t 815 130 035 450 624clamp loop 130 035 450 624, 10342977 lv7 t 815 443857 019 012 socket 7 pole, 10328834 lv7 t 815 443933 925 160 sealing ring, 10318365 lv7 t 815 273 121015 560 bushing 7x1 csn 63 3881 1, 10342872 lv7 t815 443 851 278 001 switch of search lights, 10323346 lv7 t 815 442 076 825 174 tube assemblymetal 442 076 825 174, 10340702 lv7 t 815130054392034 rubber manifold washer, 10330914lv7 t 815 311 214 215 240 spring washer 24 csn02174105, 10324776 lv7 t 815 442 954 160 204 spacerspecial shaped 442 954 160 204, 10342763 lv7 t 815443 853 045 000 transfer gear box change overswitch, 10325901 lv7 t 815 442 052 260 154 distancebolt, 10331949 lv7 t 815 442 050 780 294 spacerinsert, 10326622 lv7 t 815 442 053 112 004 hose, 10565457 lv7 t 815 442 054 032 874 gasket 0 25mm, 10314757 lv7 t 815 309 505 140 637 screw m6x75 csn02 1150 50, 10337219 lv7 t 815 442 950 510 214spring5360 040468, 10320925 lv7 t 815 4x4 413 311013 000 double ended wrench 13x17, 10320901 lv7 t815 4x4 413 611 003 003 hammer with handle 27 300gm, 10324818 lv7 t 815 4x4 347 222 070 000 bulb 24 v1 2 w w2x46d 2741, 10326044 lv7 t 815 4x4 443 113632 000 wheel disc nut m22 x 1 5 din 74361 10, 10314668 lv7 t 815 4x4 442 052 382 314 screw, 10321392 lv7 t 815 4x4 007 400 020 307 tyre pressuregauge valve 0 10 kg cm2, 10331909 lv7 t 815 4x4 613229 185 000 rest brk shoe perrot, 10324970 lv7 t815 4x4 413 215 003 000 hand chain saw with cover, 10312003 lv7 t 815 4x4 110 841 233 000 twezers forfusible cutout 0100358, 10324468 lv7 t 815 4x4 323141 362 000 connecting rod bushing 6039 05 00 85mm, 10519256 lv7 t 815 hmv 442 028 512 864 tie rod, 10521752 lv7 t 815 hmv 106 318 151 000 screw m8x26, 10518123 lv7 t 815 hmv 442 976 960 074 angularlever lh, 10523406 lv7 t 815 hmv 130 050 761 324thrust ring, 10531703 lv7 t 815 hmv 442 028 512 894tie rod, 10531778 lv7 t 815 hmv 442 050 660 704 lockring, 10531790 lv7 t 815 hmv 442 050 520 714 spring, 10532486 lv7 t 815 hmv 442 050 060 574 intermediatelever pin, 10531954 lv7 t 815 hmv 442 076 835 854line, 10530957 lv7 t 815 hmv 442 053 120 644 hose7x1 5x470, 10531237 lv7 t 815 hmv 443 851 011 000switch, 10524202 lv7 t 815 hmv 442 079 011 654 bodycontact conductor, 10348081 lv7 t 816 371 814 0370 cut out fuse 3wk 50301 10a, 10338929 lv7 t 816 993100 314 0 socket h3132 am 12x1 5x6 a3c, 10324960lv7 t 816 205 092 136 4 shim spacer, 10346126 lv7 t816 207 572 132 4 lock, 10339089 lv7 t 816 548 241070 0 clip torrow 70 90 12c7w2, 10348126 lv7 t 816 //bid details2 / 145 232 101 0 pistion ring 140x3 5 csn 02 7011 00, 10526573 lv7 sca 366303 seal ring, 10305355 lv7 sca387353 gasket, 10303154 lv7 sca 217990 sealing, 10301074 lv7 sca 394155 t nipple, 10300912 lv7 sca2530018696 203953 piston, 10300970 lv7 sca 202270connector, 10303021 lv7 sca 218522 hose, 10306448lv7 sca 165786 elbow tube, 10307366 lv7 sca 387223gasket, 10307004 lv7 sca 207606 elbow connector, 10306114 lv7 sca 808274 bolt, 10301581 lv7 sca131115 cam shaft bearing 2 3, 10305201 lv7 sca128825 gasket, 10306590 lv7 sca 217280 stop, 10305621 lv7 sca 300333 parts set terminal, 10301069 lv7 sca 229704 elbow connector, 10304600 lv7 sca 562653 connector, 10305120 lv7sca 14670 bulb24v 2w ba 9s l23 mm, 10304683 lv7 sca234112 sealing, 10305321 lv7 sca 387280 gasket, 10304727 lv7 sca 120252 rubber buffer, 10302470lv7 sca 260194 driving cable, 10304910 lv7 sca811289 tube, 10307362 lv7 sca 387219 gasket, 10307238 lv7 sca 217561 upper part, 10306386 lv7sca 172065 tee connector, 10305706 lv7 sca 387263gasket, 10304580 lv7 sca 234327 elbow connector, 10300967 lv7 sca 202237 flange tube, 10306089 lv7sca 5330384603 387210 gasket, 10305285 lv7 sca562516 hp hose 1250mm, 10302238 lv7 sca 1108223repair kit, 10306200 lv7 sca 154333 gasket, 10303265 lv7 sca 270122 o ring, 10302063 lv7 sca133005 elbow tube, 10300913 lv7 sca 397999 hose, 10301618 lv7 sca 244282 needle bearing, 10307346lv7 sca 387212 gasket, 10303588 lv7 sca 391724hose return, 10307423 lv7 sca 140543 elbowconnector, 10305738 lv7 sca 257829 hose, 10305629lv7 sca 387225 gasket, 10303245 lv7 sca 16352 bolt, 10307550 lv7 sca 384713 gasket, 10304797 lv7 sca141706 clamp, 10300838 lv7 sca 203919 push rodsealing, 10300193 lv7 sca 139915 hose, 10302099 lv7sca 221637 tee connector, 10301614 lv7 sca 244239valve, 10301750 lv7 sca 5340186543 303649 plug, 10305546 lv7 sca 297688 elbow nipple, 10305441 lv7sca 216551 seal ring, 10305533 lv7 sca 214471 sealcover, 10305832 lv7 sca 232748 spacer sleeve, 10301375 lv7 sca 189489 connector, 10301950 lv7sca 5331000056 o ring, 10305323 lv7 sca 387282gasket, 10305014 lv7 sca 145244 connector, 10302119 lv7 sca 193303 boot, 10301009 lv7 sca229321 o ring, 10303680 lv7 sca 241033 regulator, 10301172 lv7 sca 392702 o ring, 10305844 lv7 sca229353 sealing, 10302304 lv7 sca 1111298 259813hose, 10305725 lv7 sca 387265 gasket, 10304173 lv7sca 242537 air heater, 10304389 lv7 sca 562629module valve, 10302603 lv7 sca 279612 main bearingno4 ud2 101 12mm, 10307556 lv7 sca 239740 bearing, 10302508 lv7 sca 278364 lever, 10300836 lv7 sca203917 screw, 10305437 lv7 sca 215482 hose, 10301303 lv7 sca 255288 bolt m18x55, 10301953 lv7sca 5331000057 o ring, 10301002 lv7 sca 229249nylon strip, 10306315 lv7 sca 796360 hose clamp, 10301143 lv7 sca 255080 socket, 10303800 lv7 sca177943 bulb 24v 10w, 10524666 lv7 baz 5937 4209086gasket injector, 10344698 lv7 krz 502 3101040 nutwheel right thread, 10338674 lv7 krz 236 1701135bushing, 10324955 lv7 krz 236 1601107 lock plate, 10335354 lv7 krz p46 3710000a fog head lamp switch, 10316557 lv7 krz 255b 3501105 lining shoe, //bid details3 / 145 lv7 krz 255b 2402034 gasket housing, 10318160 lv7 krz 238k 1601168 a adjusting screw, 10317047 lv7 krz 255b 3105115 cable handle bar, 10327066 lv7 krz 256b1 3506249 pipe assy from aircyl to single safety, 10333500 lv7 krz 100 3514009repair set brake valve, 10326036 lv7 krz pr133722000 a fuse block pr 13a, 10349581 lv7 krz 2144501120 10 ring thrust winch drum, 10330902 lv7krz sp135 3802010 speedometer sp 135, 10317623 lv7krz 255b 3104036 seal, 10326666 lv7 krz 255bs1301010 radiator assy with frame, 10340474 lv7 krz256b 3410129 seal tank cover, 10341516 lv7 krz 53a2201033 brg gp 3804704k3 needle, 10337659 lv7 krz210 1803048 a ring oil seal gland, 10347197 lv7 krz214b 3506310 a tube air cross to rear axlerightbrake, 10315972 lv7 krz 255b 3901094threaded plug wrench 14x19, 10331316 lv7 krz255b 2902032 bolt centre spring, 10321119 lv7 krz255b 4502012 20 propeller shaft assy, 10352667 lv7krz 0180603 ks 9 ball bearing, 10347482 lv7 krz 214b1310172 rod sealing, 10333358 lv7 zil 130 3430139intermediate cover sealing ring, 10331940 lv7 zil130 3401487 b sealing ring, 10346074 lv7 zil 130t3704010 a ignition switch less facing nut, 10345173lv7 zil 300275 p8 through union, 10335486 lv7 zil164 3519050 diaphragm, 10319888 lv7 zil 131 3501105shoe friction lining, 10312627 lv7 zil 131 2902011 bfront spring clip assy, 10320155 lv7 zil 131 3506300pipe, 10324998 lv7 zil 131 1802029 gasket10304489 lv6-mt6 2547-0913-5828 rubber hose scoopto tc, 10351478 lv7/mpvy x-1102213 oil flinger, 10351971 lv7/mpvy f-2400322 selector fork 1&2, 10383768 k7 ikg/bum-bj-65-x/22 hammer sledgedouble face 6.5kg, 10376863 k7 5305-011622 screwmild steel for cap je-10, 10386928 k7 ikg/bum-bur-20-16 head light, 10383786 k7 ikg/bum-bj-65-x/24 barcrow with chisel and claws 8 kg, 10379091 k7 f-8600650 braided hose 60 mtr, 10377967 k7 4210-000079 adopter 100mm 4 female screw , 10381136k7 4210-000002 basket strainer suction100mm 4 , 10547348 k7 4210-000034 coupling instantaneousfemale 63mmx70mm, 10383095 k7 4210-000571 brktext fire vapourising liquid halon , 10381306 k7ikg/bum-bur-21-24a front glass rh wind screen atulfuff, 10381691 k7 4020-000222 rope manila 51mmcircum 30 mtr long, 10341361 lv7/av-15 578-003-162-252-28 fuse, 10335309 lv7/av-15 578-003-101-752-16ring, 10331499 lv7/av-15 578-003-109-952-85 packing, 10332971 lv7/av-15 324-971-001-700 nut km 17, 10348351 lv7/av-15 578-003-100-752-34 packing piece, 10346885 lv7/av-15 578-003-107-952-38 reductingsocket, 10335062 lv7/av-15 347-223-352-240 .bulb24v/21w, 10348601 lv7/av-15 578-903-912-452-60 oilguage, 10565108 lv7/av-15 309-543-181-032 screw, 10324158 lv7/av-15 578-003-008-852-16 lamellascarrier, 10326973 lv7/av-15 1102-01-0045 elasticring, 10314010 lv7/av-15 578-003-928-752-62 pipe, 10311943 lv7/av-15 578-003-914-552-30 bracket rearview mirror, 10328838 lv7/stlnvf 5120-423974/p-2612547 wrench socket, 10340601 lv7/t-815 130-076-856-344 tube and fittings metallic*, 10344389 lv7/t-815 5120 410392 wrench open end413-311-013-172, 10333097 lv7/t-815 443-965-621-003 bent tube, 10328552 lv7/t-815 443-317-038-109 axle signal lamp, 10312481 lv7/t-815 130-077-770-044 plus terminal, 10327074 lv7/t-815 442-077-770-034 minus terminal

corporations/Associations/Others

TRN :35730003 | 18 Nov, 2025

Tender Value : 1.31 Crore

Hisar - Haryana

Tender for augmentation of single bus bar to double bus bar arrangement with 0.4 acsr conductor along with bus coupler bay and allied equipments to accommodate 132 kv circuits at 132 kv substation charkhi dadri- ii. package-1 augmentation of single bus ...

State Government

TRN :35720004 | 10 Nov, 2025

Tender Value : 20.00 Lacs

Jaipur - Rajasthan

Tender for supply of construction materials- ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash

Related Searched Keywords : conductor bar

List of conductor-bar Tenders

Tender for augmentation of single bus bar to double bus bar arrangement with 0.4 acsr conductor along with bus coupler bay and allied equipments to accommodate 132 kv circuits at 132 kv substation charkhi dadri- ii. package-1 augmentation of single bus ...

Get conductor bar Tender Alert...

Related Searched Keywords : conductor bar

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us