Filters

List of cl-item Tenders

List of latest cl-item Tenders in Indian Tenders. Click on any cl-item Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for cl-item Tenders.

All-Tenders (153)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35224642 | 22 Sep, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for supply of 1 set of spare for te/be meter of three phase loco as per clw specification no clw/es/3/0071. a set consist of 05 items in 05 nos. as follows i upper and lower jewel assembly, qty- 01 no. ii moving coil assembly, qty-01 no. iii dial, qty-01 no. iv glass, qty-01 no. v led board, qty-01 no. 2 set of spares for catenary voltmeter of three phase loco as per clw specification no clw/es/3/0070. a set consist of 05 items in 05 nos. as follows: - i upper and lower jewel assembly, qty- 01 no. ii moving coil assembly, qty-01 no. iii dial, qty-01 no. iv glass, qty-01 no. v led board, qty-01 no..

Central Government/Public Sector

TRN :35225414 | 18 Sep, 2025

Tender Value : 0

Gorakhpur - Uttar Pradesh

Tender for supply of set of miniature circuit breaker comprising of 06 item in 11 nos. each set as per sketch no.els/aq/wag-9/sk no.0032/rev.03 & clw specn. no.clw/es/3/0096 alt.l for wag-9 loco..

Central Government/Public Sector

TRN :35226720 | 16 Sep, 2025

Tender Value : 3.22 Crore

Ranchi - Jharkhand

Tender for gem bids for providing operation and maintenance services for 1st year, providing operation and maintenance services for 2nd year, testing bdv value of transformer oil for 1st year, testingbdv value of transformer oil for 2nd year, dehydration andfiltration of transformer oil for 1st year, dehydration andfiltration of transformer oilfor 2nd year, servicing, maintenance and testing of air circuit breaker for 1st year, servicing, maintenance and testing of air circuit breaker for2ndear, servicing, maintenance and calibration of earthfault for 1st year, servicing, maintenance and calibration ofearth fault for 2nd year, servicing, maintenance and testingof 33 kv ht for 1st year, servicing, maintenance andtesting of 33 kv ht for 2nd year, calibration of followingequiments annually clinometer for papi, repair of led type15w search light, painting of perimeter or street light poleupto 5.0 m, painting of perimeter or street light pole above5.0 m upto 9.0 m, painting of lt panels with syntheticenamel, painting of elevated type runway edge light, repair of siren upto 3 hp etc., repair of crash bell etc., sitc of slim type guidance sign board of various sizes, identifying cable fault of the defective power cable by usingcable tracer lt cable, identifying cable fault of thedefective power cable by using cable tracer lt cable htcable 33 kv grade, supply of 4.00 sqmm 3 core flat cablepvc, supply of following size multicore flexible cable, 2 x2.5 sqmm, supply of following size multicore flexible cable, 3 x 2.5 sqmm, supply of medium intensity aviationobstruction light, supply of cable trench cover of 10 mmthick, supply of siren minimum audible upto 1 km, supplyof crash bell or gong bell 12 inch, supply of 200 w 6.6 abipin runway halogen type lamp, supply of 105 w 6.6 ahalogen lamp for inset fittings, supply of 200 w 6.6 aelevated approach halogen type lamp, supply of runwaybi pin lamp holder, supply of 6 sq.mm 5 kv grade plug andrecaptable, supply of 16 sq.mm 5 kv grade plug andrecaptable, supply of secondary 2 pin lead of 0.3 mtrlength, supply of two pin secondary plug assembly forpapi, supply of led signage converter capable to drive ledstrips of 5.5w, supply of led signage strip of 0.5 w for 11nos. in one strip, supply of medium intensity elevated typeomni directional, supply of breakable coupling for amamake glf light fittings, supply of isolating transformer 200w, 20, supply of isolating transformer 200 w, 6.6, supplyof isolating transformer 45 w, 20, supply of isolatingtransformer 45 w, 6.6, supply of isolating transformer 15w, 20, supply of isolating transformer 15 w, 6.6, supply ofisolating transformer 300 w, 6.6, supply of 360 clear innerlens filter for runway edge light fitings, supply of 360 clearouter lens filter runway edge light fitings, supply of 180deg clear inner lens filter runway edge light fitings, supplyof 180 deg red lens filter runway edge light fitings, supplyof 180 deg yellow lens filter runway edge light fitings, supply of red lens for papi, supply of clear lens for papi, supply of red spreader lens for end light fiting, supply ofgreen spreader lens for threshold light fiting, supply ofreflector for papi, supply of ht tape for afl cable, supplyof pvc tape, supply of airfield signage facia sheet 4 mmthick made of poly carbonate sheet, dsr 2022 cpwdelectrical items rs. 1000000

Central Government/Public Sector

TRN :35226765 | 16 Sep, 2025

Tender Value : 87.59 Lacs

Haridwar - Uttaranchal

Tender for gem bids for custom bid for services - schedule a manpower minimum17 nos of manpower should be provided in 3 shifts per dayas per scope of work, custom bid for services - schedule bsupply and provision of cooking & serving of food includingtea and coffee as per the menu for meals note rates areinclusive of all taxes and charges including gst, custombid for services - schedule c provision of lpg 19kg cylindersfor preparing meals for running room occupants as perscope of work note rates are inclusive of all taxes andcharges including gst, custom bid for services - scheduled provision and supply of newspapers magazines cleaningand other items washing of linens supply of uniform andexpenditure on plantation note rates are inclusive of alltaxes and charges including gst

Central Government/Public Sector

TRN :35227236 | 16 Sep, 2025

Tender Value : 0

Hojai - Assam

Tender for gem bids for wire claw as per item 1 of attached specification document, magnetic base rail thermometer as per item 2 of attachedspecification document, hydraulic bottle jack as per item 3of attached specification document, hand rake ballast asper item 4 of attached specification document, raiwlaytrack aligner as per item 5 of attached specificationdocument

Central Government And Public Sector

TRN :35227821 | 15 Sep, 2025

Tender Value : 0

Rangiya - Assam

Tender for gem bids for supply and b-assembly, s-clip, different types of pin andother items detailed as per attached docum

Central Government/Public Sector

TRN :35214002 | 12 Sep, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for gem bids for sodium hypochlorite solution v2 as per is 11673 part 1q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, additional doc 1 requested in atc, additional doc2 requested in atc, additional doc 3 requested inatc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6600304; /dated: 23-08-2025 & & / bid document1 / 12 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation3 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankicici /emd amount300000 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.14a. . % & 4& % & % 4 > \ o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , t < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : chief manager financethal, department of fertilizers, rashtriya chemicals and fertilizers limited rcf, ministry of chemicals and2 / 12 fertilizerscm finance /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.3 / 12 ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1sodium hypochlorite solution v2 as per is 11673 part 1 300000 liter 5 5 1 2 & & % % % % < < % % 4 `4 ` b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesstandards &certificationgoverning standardgenerally confirming to is 11673-part 1 latestrequirementchemical/physicaltype of gradesgrade 2 for industrial userelative density at 25 deg / 25deg c, min1.20available chlorine as cl2, percent, mass by volume12.5 to 15.0total chlorine as cl2, percent, mass by volume12.5 to 15.0free alkali as naoh, g/l, min5.0free sodium carbonate asna2co3, g/l, max0.5packaging &markingnet content of eachcontainer/ pack50 litertest reportstype of lab which carried outtest of complete product toprove the conformity of productas per specificationfrom central govt. lab, nabl accredited lab, manufacturer in-house testadditional specification parameters - sodium hypochlorite solution v2 as per is 11673 part 1 300000 liter specification parameternamebid requirement allowed valuessodium hypochloritethe chemical specification is as follows: sodium hypochlorite naocl as peris 11673 latest grade 2 1. relative density at 25 c/25 c: 1.20 min 2.available chlorine as cl, % by mass/volume: 12.5 to 15.0 3. total chlorine, % by volume as cl: 12.5 to 15.0 4. free alkali as naoh, g/l, min: 5.0 totalquantity 3, 00, 000 litre +/- 25 %* bidders offering must also comply with the additional specification parameters mentioned above. 4 / 12 //o ; b o ; b /consignees/reporting officer and quantity5. .5. ./s.no. //o ; b o ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1sushil kumar402208, stores, rcf ltd thal, alibag, district raigad300000365special terms and conditions-version:1 effective from 22-01-2025 for category sodium hypochloritesolution v2 as per is 11673 part 11. the product may also carry an isi mark/standard mark as per the bis standard governing this category. assuch buyers may also opt for isi marked product while creating bid. in such cases buyer shall verify validbis license for the same at the time of evaluation of bid and check isi marking at the time of receipt ofmaterial before issuing crac. 5 5 : : e e/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clausestender au-85726 for supply of sodium hypochlorite 300, 000 liter earnest money deposit emd for rs. 3, 00, 000 /- is to be deposited as per following instructions: online deposit: emd to be deposited online in rashtriya chemicals and fertilizers ltd rcf s accountthrough payment gateway available on our website at: www.rcfltd.com under portals emd payment click here for emd payment. submit the acknowledgement/receipt of online emd payment along with your offer.if exempted from submission of emd, then upload a valid exemption details.please note emd and integrity pact shall not be accepted after bid submission due date and non-submission of the same along with bid shall lead to rejection of your o er. no communication shall be done for the same.pre-qualification criteria:a. experience criteria: a. for manufacturer only: bidder shall submit self- attested po copies and / or invoice copies as evidence of manufacture and supply of 150 kl of sodium hypo chlorite solution is as per is 11673 latest grade 2, manufactured and supplied during an5 / 12 y one of the last 3 years. b. for non-manufacturers: po copy of sodium hypo chlorite solution as per is 11673 latest grade 2 supplied during last seven years from the date of tender satisfying minimum one criteria as follows: i. single po copy of minimum quantity 240 kl.ii. two po copies of minimum quantity 150 kl each.iii. three po copies of minimum quantity 120 kl each.. c. relaxation in experience criteria for eligible mses/ startups1. for mses- relaxation of 25% in prior experience shall be provided to the qualifying mses.2. for start-ups no prequali cation criteria except for criteria de ned by government of india for de nition as start up like certi cate from dipp, maximum years from incorporation and turnover criteria. vendor shall be start up for item under procurement and maximum 10% additional qty. to be awarded to them. for detail kindly refer annexure-v of buyer added atc.b. financial criteria: i. ca certified turnover during last three financial years 2021-22, 2022-23, 2023-24 or 2022-23, 2023-24, 2024-25 required minimum avg. turnoverof rs. 82.12 lakh. the turnover should be issued by practicing ca with membership number, seal and signed with udinin case the date of constitution / incorporation of the bidder is less than 3 years old, the average turnover in respect of the completed financial years after the dateof constitution shall be taken into account. in this case, the financial turnover during last nancial year / the average nancial turnover during preceding two nancial years should be at least rs. 82.12 lakh. ii. relaxation in experience criteria for eligible mses/ startups1. for mses- relaxation of 25% in annual nancial turnover shall be provided to the qualifying mses.2. for startups no prequali cation criteria except for criteria de ned by government of india for de nition as start up like certi cate from dipp, maximum years from incorporation and turnover criteria. vendor shall be start up for item under procurement and maximum 10% additional qty. to be awarded to them.for detail kindly refer annexure-v of buyer added atc. iii. the net worth of the bidder rm manufacturer or principal of authorizedrepresentative should not be negative on the relevant date . it means the net worth of the bidder should not be negative in the balance sheet of last nancial year.andnet worth of bidder should have not eroded by more than 30% thirty percent in the lastthree years, ending on the relevant date . it means the net worth of last nancial year should not be less than 70% compared to the 3rd last financial year.in case the date of constitution/ incorporation of the bidder is less than 3 years old, the following will be applicable: the net worth in each of these years should not be negative. net worth in respect of the immediate previous financial year should not have eroded more 30 per cent than that of its previously audited nancial statement. in case the bidder has completed financial statements of only preceding year, the clause of net worth erosion will not be applicable the relevant date means 31-03-2024 for block of fy 2021-22, 2022-23& 2023-24 and 31-03-2025 for block of fy 2022-23, 2023-24, 2024-25.the nancial soundness should be ca certi ed or audited nancial statement certified by cac. make in india clause: as per revision dt 19.07.2024 of public procurement policy 2017, non-local suppliers cannot participate in tenders having estimates less than r6 / 12 s. 200 crores. offers of class-i and class-ii local suppliers as per make in india policy can only be considered for evaluation and award of contract.d. integrity pact duly signed with date and stamped on each page. upload in relevant packet of this tender.signing the integrity pact is a prerequisite for prequalification. integrity pact and nit conditions will form part of the contract. security deposit:the supplier receiving the loa is required to furnish the required performance security, in the prescribed form by the speci ed date; failing this necessary action including forfeiture of emd will be taken against the supplier. supplier shall submit the security deposit for 05% of the order value basic contract value without taxes within 15 days of the p.o. date in the form of dd or bank guarantee as per r.c.f. format from r.c.f. approved banker valid for a period of delivery period plus 60 days for claim period. or performance security may be furnished in the form of insurance surety bond, account payee demand draft, fixed deposit receipt from a commercial bank, bank guarantee issued/con rmed from any of the commercial bank in india, or online payment in an acceptable form. if the supplier / contractor fails to submit the performance security as indicated above, performance security will be deducted from running billsthe performance security will be forfeited and credited to the procuring entity s account in the event of a breach of contract by the contractor. it shall be refunded to the contractor without interest, after he duly performs and completes the contract in all respects but not later than 90ninety days of completion of all such obligations including the warranty under the contract.bank guarantee to be addressed and submitted to: chief manager finance, rcf thal unit, alibag, raigad 402208.technical conditions:1the chemical specification is as follows: sodium hypochlorite naoclas per is 11673 latest grade 21. relative density at 25 c/25 c: 1.20 min2. available chlorine as cl, % by mass/volume: 12.5 to 15.03. total chlorine, % by volume as cl: 12.5 to 15.04. free alkali as naoh, g/l, min: 5.0total quantity 3, 00, 000 litre +/- 25 % terms and conditions- 1. certi cate of analysis from nabl accredited lab/manufacture in-house/oem and msds shall be suppliedalong with supply.2. material received at rcf thal shall be inspected by rcf thal. rcf representative will draw sample and analysis will be carried out at rcf s laboratory. the results obtained at rcf s laboratory will be nal and binding. the consignment shall be rejected if it does not meet the po specification. delivery period:1. delivery period of naocl shall be within one year from gem po placement.2. delivery shall be in staggered manner as per rcf requirement. at single time minimum 15 kl to 20 kl sodium hypochlorite will be required.3. material delivery shall be done within ten days after rcf concern official information.7 / 12 . drum shall be delivered on wooden pallet.5. successful bidder shall take back the empty hypo drums within one month after use.6. material shall be supplied in drum having sodium hypochlorite solution in net volume of 50 litre drum.7. delivery at rcf thal site only.8. the shelf life of the sodium hypochlorite solution shall be a minimum of one 1 year from the date of delivery of the material. payment terms: payment shall be made on the 30th day from the date of receipt of material at rcf thal site, subject to acceptance of the material as per the acceptance/rejection criteria and submission of all required documents. acceptance / rejection criteria for sodium hypochlorite: 1. acceptance standard range 12.5% to 15%: if the active chlorine content of the supplied material is between 12.5% and 15%, the material shall be accepted. payment will be made considering 12.5% active chlorine content as the base i.e.100 percent payment. any excess concentration above 12.5% shall not be considered for additional payment.2. acceptance higher than 15%: if the active chlorine content exceeds 15%, the material shall still be accepted. however, payment will be restricted to 12.5% of active chlorine content only. example: if one bidder supplies sodium hypochlorite with 12.5% and another with >15% chlorine, both will be paid at the 12.5% base rate.3. acceptance with pro-rata payment 9.5% to <12.5%: if the active chlorine content lies between 9.5% and less than 12.5%, the material will be accepted, but payment shall be made on a pro-rata basis. payment formula:payable amount actual chlorine content % / 12.5% rate as per gem po per litreexample: if the actual chlorine content is 11%, then:payment 11 % / 12.5 % rate as per gem po per litre4. rejection below 9.5% : if the active chlorine content is below 9.5%, the entire lot shall be rejected and not accepted for delivery. integrity pact:rcf has accepted and agreed to the terms and conditions of the integrity pact.the bidder, as a token of acceptance of the terms and conditions of the integrity pact will sign and stamp the integrity pact and submit the same with nit documents.signing the integrity pact is a prerequisite for prequalification and integrity pact and nit conditions will form part of the contract. documents to be submitted along with offer:1. emd payment details8 / 12 . integrity pact duly signed with date and stamped on each page3. po copies as per above mentioned criteria4. ca certified turnover proofs of last three financial years mentioning udin5. net worth details as mentioned above6. make in india declaration as per make in india policy mentioning % of local content and place of value addition7. no deviation certificate as per format given in bid document please note emd and integrity pact shall not be accepted after bid submission due date and non-submission of the same along with bid shall lead to rejection of your offer. no communication shall be done for the same. additional information:1. the rates quoted shall be inclusive of all taxes, duties, freight, insurance and any other statutory charges.2. pre-bid meeting shall be conducted on 10th day of tender publishing at rcf thal, alibag, raigad maharashtra-402208. queries regarding pre-bid meeting shall be sent to rcf on following mail before 7 days of pre-bid meeting.3. any communication shall be done to mail id gshaha@rcfltd.com/ hemant.rao@rcfltd.com note: please note that any blank field un-marked in the preceding confirmation box will be treated as agreed only. no.descriptionbidder confirmationplease put in front of your confirmation1pl. ensure following documents are submitted along with bid document 1.1emd as per bid document submitted1.2po copy as per pqc submitted1.3turnover certificate as per pqc submitted1.4net worth certificate of last 3 years submitted1.5integrity pact duly filled, signed and stamped along with date on each page which is attached in buyer added atc.also signed and stamp copy of buyer added atc. submitted9 / 12 .6make in india declaration as per make in india policy mentioning % of local content and place of value addition submitted2pl. make sure that quoted rates are inclusive of all taxes i.e. gst, freight, packing and forwarding and insurance, statutory charges etc i.e. delivered price to rcf thal stores confirmed3please note that rcf will not accept any deviation in payment termpayment terms: payment terms: payment shall be made on the 10th day from the date of crac as per std. term & cond., subject to acceptance of the material as per the acceptance/rejection criteria and submission of all required documents. noted4mutually agreed damages clause for late delivery @ 0.5% per week or part thereof subject to maximum of 10% of total p.o./contract value. noted5firm price: price shall remain firm through out

State Government

TRN :35218272 | 15 Sep, 2025

Tender Value : 7.00 Lacs

Imphal - Manipur

Tender for gem bids for polo, invitation card, flex, stationery items, printing ofscore sheet, digital print of certificate for polo, lime powder for line marking of ground, makingand printing charge of drapery for release ofballoons, making charge of rosettes for vips, polo ball woodenpolo ball fibre, 9v battery forcordless mic, flower pot, nail, t shirt fullsleeves print on front, identity card pouches, clip, medals, trophy, gift items, hiring charge ofkokyet and kajenglei for chief guest, makingcharge of rosettes for prize wining horses, roller charge for ground maintenance, payemtnto ampa for gd charge tech assistance, publicityhoarding, construction of stage, welding chargeof lecture stand, tentage charge, culturalprogramme for opening and closing ceremony, payment of singer opening and closing ceremony, payment of music system opening and closingceremony, cash prize to winner men and women, cash prize to runner men and women, cash prizeto disciplined tem men and women, cash prize tobest pony, cash prize to best player, refreshement during opening ceremony of polotournament, refreshement during closingceremony of polo tournament /bid number: gem/2025/b/6604626* /dated: 24-08-2025 & & / bid document1 / 29

State Government

TRN :35218511 | 15 Sep, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for polo, invitation card, flex, stationery items, printing ofscore sheet, digital print of certificate for polo, lime powder for line marking of ground, makingand printing charge of drapery for release ofballoons, making charge of rosettes for vips, polo ball woodenpolo ball fibre, 9v battery forcordless mic, flower pot, nail, t shirt fullsleeves print on front, identity card pouches, clip, medals, trophy, gift items, hiring charge ofkokyet and kajenglei for chief guest, makingcharge of rosettes for prize wining horses, roller charge for ground maintenance, payemtnto ampa for gd charge tech assistance, publicityhoarding, construction of stage, welding chargeof lecture stand, tentage charge, culturalprogramme for opening and closing ceremony, payment of singer opening and closing ceremony, payment of music system opening and closingceremony, cash prize to winner men and women, cash prize to runner men and women, cash prizeto disciplined tem men and women, cash prize tobest pony, cash prize to best player, refreshement during opening ceremony of polotournament, refreshement during closingceremony of polo tournament /bid number: gem/2025/b/6604731* /dated: 24-08-2025 & & / bid document1 / 29

Central Government/Public Sector

TRN :35219596 | 15 Sep, 2025

Tender Value : 0

Bhusawal - Maharashtra

Tender for supply of set of miscellaneous items for earth ret set of miscellaneous items for earth return brush holder assembly of 3 phase locomotive as per spec. no. clw/es/3/0017 alt `d and clw drawing no. clw/es/3/sk-1/0017/d as follows 1 insulating bush-1 item no. 3, qty - 500 nos., 2 insulating bush-2 item no. 4, qty - 500 nos. 3 verbus rip screw m10 x 20 mm along with plain and spring washer item no. 7, qty - 50 nos., 4 hexagonal bolt m6 x 16 mm along with plain and spring washer item no. 8, qty - 50 nos., 5 safety nut nylock m10 item no.13, qty - 200 nos., 6 locking screw m10 x 48 mm item no.11, qty - 200 nos., 7 inbus rip screw m8 x 20 mm item no. 6, qty - 500 nos. one set consisting of 07 items in 2000 nos. material to be procured from clw approved sources only as per clw item id -2100414..

Related Searched Keywords : cl item

List of cl-item Tenders

Tender for supply of set of miniature circuit breaker comprising of 06 item in 11 nos. each set as per sketch no.els/aq/wag-9/sk no.0032/rev.03 & clw specn. no.clw/es/3/0096 alt.l for wag-9 loco..

Tender for gem bids for supply and b-assembly, s-clip, different types of pin andother items detailed as per attached docum

Get cl item Tender Alert...

Related Searched Keywords : cl item

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us