Filters

List of ci-valve Tenders

List of latest ci-valve Tenders in Indian Tenders. Click on any ci-valve Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ci-valve Tenders.

All-Tenders (82)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35384423 | 03 Oct, 2025

Tender Value : 47.52 Lacs

Agra - Uttar Pradesh

Tender for gem bids for mh, dermi marker pen sterile pack bone wax manual vaccumaspiration syringes disposable vascular tape red disposable vascular tape yellow bandage suspensoryscrotal disposable lap ports trocar optical 10mm gasports on off valve disposable lap ports trocar optical5mm gas ports on off valve polypropylene bluemonofilament 70 75cm 4 0 half circle rb 25 mm needle isopropanol 60 65 percentage and benzalkonium chloride skindisinfectant 63gm 025gm in 100gm apparatus oxygeninhalation portable tubing 1 meter with connector for apparatus oxygen portable light weight tubing 122 cmwhite mask adapter and bayonet connection for cathetersuction endobronchial with terminal transparent non toxicpvc tubing size fg 10 length 45 cm catheter suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm catheter suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm medium and highconcentration oxygen seethrough masks pvc with 7 ftoxygen supply tubing adult medium and highconcentration oxygen seethrough masks pvc with 7 ftoxygen supply tubing paediatric mapleson non rebreathingsystem bain circuit pressure monitoring line 100 cm 200cm male female tube endo tracheal oral nflatable cufftube pilot bag 50 mm internal diameter tube endotracheal oral inflatable cuff tube pilot bag 55 mm internaldiameter tube endo tracheal oral with inflatable cuff tubeand pilot bag 75 mm internal diameter tube endotracheal oral with inflatable cuff tube and pilot bag 80 mminternal diameter tube endo tracheal oral with inflatablecuff tube and pilot bag 90 mm internal diameter disposable sterile tourniquet bandage triangular lintabsorbent cotton tube feeding smooth plastic infant 38 bid number gem2025b6654001 dated 11-09-2025 bid document1 131 1 1 cm long 8f with red flexible connector for nasogastricfeeding, tube feeding smooth plastic infant 38 cm long 5fwith red flexible connector for nasogastric feeding, markingpen, aluminium foils, paediatric vol. admn set, foleyballoon three way 26 fr, ultrasound jelly bottle of 250 ml., extension tubing with three way stop cock 10 cms in length, glucostrips one touch select bott of 25 strips, glucostripsfor accucheck active bott of 50 strips, endotrachealtube pvc cuffed size 2, mucus sucker, swab sticks, disposable urinal female, disposable urinal male, paeditric urine collection bags, pencil cell aa, sheathprotective condom, body wipes pkt of 100 wipes, rifaximin 400 mg cap, silodosin 4mg tab, ipratropiumbromide respirator soln 500 mcg 2 ml respule, injondansetron 4 mg, cefixime syp 50 mg 5ml bott of 30 ml, ondansetron syp 2 mg 5ml in bott of 30 ml, ondansetron 8mg tab, natural micronised progesterone 200 mg tab, clobazam 5 mg tab, ear drop acetic acid 2 percentage bottof 10ml, tab methylergometrine 0.2 mg, zolpidem 10 mgtab, tab nifedipine retard 10 mg, mometasone nasalspray 0.1 percentage, tab mifepristone 25 mg, dinogest 2mg tab, fentanyl citrate 50 mcg ml 2 ml inj, vasopressin20 units ml inj 1ml ampoule, diltiazem 5mg ml inj, terlipressin 1mg plus 10ml diluent zero point 10mg ml, injthiamine 100 mg ml 2 ml amp, inj clindamycin 600 mg, tranexamic acid 500 mg 5ml inj, inj doxycycline 100 mg, inj ceftriaxone 1 gm plus salbuctam 500 mg plus disodiumadetate 37 mg, oint gentamycin 0.1 percentage tube of 15gm, lotion carbolic acid bott of 400 ml, formaldehyde 40percentage w v, hydrogen peroxide solution with stabilizerip 20 volume 500 ml bott, continuous glucose monitoringsystem free style libre sensor, tab tenofovir disoproxilfumarate 300 mg plus tab lamivudine 300 mg plus tabdolutegravir 50 mg, clindamycin 600 mg cap, lotchlorhexidine gluconate 2.5 percentage w v in ethyl alcohol70 percentage v v bott of 500ml, lma i gel size 4, i gelsize 5, disposable sterile nerve stimulator needle forregional anaesthesia size 21g 100mm length, microlaryngeal oral nasal tracheal tube cuffed s 5.00mm, microlaryngeal oral nasal tracheal tube cuffed s 6.00mm, supraglotic airway device lma bockbuster size 1, supraglotic airway device lma bockbuster size 2, supraglotic airway device lma bockbuster size 3, supraglotic airway device lma bockbuster size 4, supraglotic airway device lma bockbuster size 5, baskamask size 3, baska mask size 4, baska mask size 5, disposable buffet cap, opening pack containing sheetlarge 3 trolley cover 2 surgeon gown 4, lot povidoneiodine 10 percentage solution bottle opf 500ml, lotpovidone iodine 10 percentage solution bottle opf 100ml, 2propanol 45gm 1 propanol 30gm ethyl hexadecyl dimethylammonium ethyl sulphate 0.2gm with skin protectingsubstances 500ml bottle with dispenser, lot propanol 2 and1 propanol macetronium ethylsulphate 0.2 percentage45gm 30gm 10 100gm bottle of 500ml, liq formaldehyde40 percentage, lot povidone iodine 5 percentage bottle of100ml, lma i gel size 3, disposable sterile spinal needle26g adult, shi gowns operating hiv kit, bowle dick testpack for steam sterilisation, biological indicator geobacillus sterio thermophilus for steam sterilization, unglignocaine 2.5 percentage plus prilocaine 2.5 percentagetube of 30gm, betascrub lotion betadine 7.5 percentagewith surfactant bottle of 500ml, steam chemical integratorcomlpy sterigauge 3m 100 in each packet, disposable //bid details2 / 131 sterile bougie for difficult intubation adult size, disposablesterile bougie for difficult intubation neonate size, rapidplasma reagin test kit the kit contain i rpr antigensuspension ii positive control serum iii negative controlserum iv disposable plastic cards v disposable plasticdropper, widal latex test kit of 4 x 5ml, westergren tubefor esr disposable, ra factor 100 test, stool occult blood50 test, enterocheck kit 50 test, cover slip 22 x 50mm, crp latex test 5.0ml, multistic 10sg reagent strip for urineanalysis bottle of 100, uristicks strips albumin and glucosestrips 100 strips, ketostick bottle of 100 test, glass slide75 x 25mm, bio rad control l1 12 x 5 ml for biochemical, bio rad control l2 12 x 5 ml for biochemical, lipocheckdiabetic control, absolute alcohol bottle of 500ml, paraffinwax for histopath mp 50 degree c, xylene, acetone 1 x500ml, poly l lysine bottle of 50ml, rapid haematoxylinharris stain 1 x 500ml bottle, pulv lithium carbonate, stain phloxine bottle of 25gm, disc optochin, bacitracindisc 50 disc, rapid scrub typhus igg plus igm test of 20, leptospira igg and igm card test of 10, petri dish, acidsulphuricum sp. gravity 1.820 1.825, amyl alcohol, tourniquet, johnson and johnson band aid for use aftersample collection, aaa power cell, micro pipette tip for 500to 1000ml packet of 1000 tips, improved neubauercounting chamber, tissue paper roll, pas stain, highprofile blade, mac conkey agar, inj monoclonal, eye dropsdorzolamide 2 percentage plus timolol 0.5 percentagebottle of 5ml, eye drops bimatoprost 0.03 percentagebottle of 3ml, eye drops travoprost 0.004 percentage plustimolol 0.5 percentage bak plus 0.015 percentage withdrop tainer, eye oint sodium chloride 6 percentage w w, moxifloxacin hydrochloride 0.5 percentage plusdexamethsone 0.1 percentage ophthalmic solution bottleof 5ml, eye drops bromofenac 0.9mg ml bottle of 5ml, eyedrops nepafenac sodium 0.1 percentage, eye ointmoxifloxacin, eye drops azelastine 0.05 percentage bottleof 5ml, eye oint hypromellose 2 percentage, eye dropslatanoprost 0.005 percentage with dropper applicator, edsystane complete propylene glycol 0.6 percent polyquad0.001 percentage sorbitol oil heavy 1 percenthydropxypropyl gaur boric poyoxyl 40 sterate sorbitoltristerate editate disodium dimyristol, eye drops systanehydration sodium hyaluronate plus peg 400 plus pg, systane gel, eye drops ripasudil 0.4 percentageophthalmic solution bottle of 5ml, eye drops neetarsudilophthalmic solution 0.02 percentage bottle of 3ml, cap ofocular antioxident containing vitamin c 500mg vitamin e400 iu copper 2mg zinc 80mg luetin 10mg andzeaxantithin 2mg, cap i site vitamin c zinc l glutathionemangenese lutein copper selenium caretenoids betacarotene vitamin e acetate, eye gel genteal gel hpmc, eye drops levofloxacin ophthalmic solution, cooling eyepatch, evolve eye mask, cellulose sponge spears forophthalmic surgery pack of 5, wet amniotic membrane, amniotic membrane sheet dry sterile, adhesive patches foramblyopia for 10 years age, pfs pre filled syringehydroxy propyl methyl cellulose 1 percentagedermi marker pen sterile pack, bone wax, manual vaccumaspiration syringes, disposable vascular tape red, disposable vascular tape yellow, bandage suspensoryscrotal, disposable lap ports trocar optical 10mm, gasports on, off valve, disposable lap ports trocar optical5mm, gas ports on/off valve, polypropylene bluemonofilament 70-75cm size 4/0, circle rb 2, iso-propanol60-65% and benzalkonium chloride skin disinfectant 63gm, //bid details3 / 131

Central Government/Public Sector

TRN :35385892 | 25 Sep, 2025

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for gem bids for window dropper, circuit breaker 9432 020, clutch plate 430 gtz 4918 62521, switch trw 311 166, armature assy, assy face side rh, solenoid operated valve, assy face side lh, assy clutch disc pressure plate, timing device piston, roller ring assembly, electronic flasher kit, door lock front lh, ring retaining, thermostat, bolt fly wheel housing (m14x2x45), arm windshield wiper, stainless steel brush 5cm widthx20cm wit

Central Government/Public Sector

TRN :35388135 | 25 Sep, 2025

Tender Value : 0

Jalandhar - Punjab

Tender for gem bids for copper alloy taps/stop valves v2 conforming to is 8931q3, water fittings - copper alloy float valves horizontalplunger type as per is: 1703 q4, bathroom watershower v2 q3, plastics bib taps pillar taps angle valvesand stop valves as per is 9763:2000 latest q3, wastefittings for washbasin and sinks as per is 2963 q3, bathroom or toilet mirror v2 q4, wire mesh fabric orcloth v2 as per is 1568 q3, copper alloy gate valve forwaterworks purpose as per is 778 q3, towel rail / ringfor bathroom q3, soap dish - case q4, flushing cisternq3, rotational moulded polyethylene water storage tanksv2 conforming to is 12701 q3, sinks q3, connectionpipe with nuts v2 q3, waste pipe q3, tower boltsferrous metals as per is 204 q3 * * // ./ ./ % %/years of past experience required forsame/similar service3 year s 2 2 % % 8 8 /mse exemption for years ofexperience and turnoverno& % & % 2 2 % % 8 8 /startup exemption for years ofexperience and turnoverno 9 /bid number: gem/2025/b/6601818: /dated: 15-09-2025 & & / bid document1 / 50 c c & & /document requiredfrom sellerexperience criteria, past performance, bidderturnover, certificate requested in atc, oem authorizationcertificate, oem annual turnover, additional doc 1requested in atc, additional doc 2 requested inatc, additional doc 3 requested in atc, additional doc 4requested in atc, compliance of boq specification andsupporting document*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyerd d f f g g : : & f & f h h f f : : j j? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & n n 9 9 / minimum number ofbids required to disable automatic bidextension3: f: f 9 9, , . . -- / / number of days for which bidwould be auto--extended7 d h d h : : : : / /number of auto extension count1 8 % 8 % /past performance80 % s %s % :c :c : : /bid to ra enabledyess %s % t t /ra quali cation rule50% lowest priced technically qualified bidders 8 8 /type of bidtwo packet bid8 8 v v /primary product categorycopper alloy taps/stop valves v2 conforming to is 8931 w w & y & y /time allowed for technicalclarifications during technical evaluation2 days / / n n z z / / 8 8 / % % h f h f g g /inspection required byempanelled inspection authority / agenciespre-registered with gemno w w z z /evaluation methodtotal value wise evaluation \ & \ & /arbitration clauseno /mediation clauseno //bid details /emd detail j /advisory bankstate bank of india2 / 50 /emd amount33000 /epbg detail n /requirednoa. 2 ^ % & 8& % & % 8 j s f /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , ` / h : / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ` ` /beneficiary : sbsohq cwe jalandhar zone, department of military affairs, indian army, ministry of defenceb.h. mahendra kumar /splitting : / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the productoffered in the bid themselves or through resellers should have regularly, manufactured and supplied same or

Central Government/Public Sector

TRN :35390274 | 22 Sep, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for maint, bid number gem2025b6639110 dated 11-09-2025 bid document1 40 1 1 tower bolts ferrous metals as per is 204 q3, pvc flatcable, aluminium conductor with pvc insulation and sheathas per is 694 q3, mcb - miniature circuit - breakers fora.c. operation as per is / iec 60898 part 1 q2, propellertype ac ventilating fans - exhaust fans v2 as per is 2312q2, plastics bib taps pillar taps angle valves and stopvalves as per is 9763:2000 latest q3, towel rail / ringfor bathroom q3, metal alloy casting water tap withaerator v2 q3, pvc insulated unsheathed cable withflexible conductor as per is 694 q2, natural sand, pipeinsulation foam, wooden ballies of size 10 feet, cgi sheet10ft x 3ft long zero point 63mm thick, cgi sheet 12feet x3feet long zero point 63mm thick, cgi sheet ft x 3ft longzero point 63mm thick, ply wood 6ft x 3ft x 6 mm thick, plywood 6ft x 3ft x 12 mm thick, ply wood 8ft x 4ft x 6 mmthick, ratchet pipe threader dia 15 20mm, door handlesteel 8 inch, hand press gun, long iron picket, grinderbosch, water level pipe 30 mtr, bosch gsb 600 cordedclectric impact drill 600w motor, hand riverters 509mm, hand grinder blade 4 inch, hand grinder michine, slicon, cp stop cock 25mm, steel but hinges 75mm, hinges50mm, hinges 100 mm, pvc gate wall 15mm, ppr teereducer thread 20 to 15mm, ppr elbow thread 15mm, ppr elbow thread 20mm, ppr elbow thread 25mm, pprelbow reducer 20 to15mm, ppr socket 20mm, ppr socketreducer 20 to 15mm, reducer 15mm to 20 mm, ptmtpillar cock 20mm, ppr bib cock 15mm, bib cock withflange 20mm, ppr pipe 15mm dia, ppr pipe 25mm dia, ppr nipple 20mm 150mm long, pvc 4 inch dia bend, lbend 15mm, l bend 20mm, tap 20mm, pvc pipe 15mm, pvc water tap 20mm, tubing gi 15mm dia, ms doorspring rat rail, tubing gi 20mm dia, lime, lagging for gipipe 15mm dia, snowcerm cement paint white, tank coverpvc with locking arrangement for 1000 ltrs tank 3 layer, legging for gi pipe 20mm dia, plywood 8x4x6mm ost, pvc waste coupling sink 41x20x7mm, snowcerm cementpaint red, pvc elbow 110 mm, gi tubing wall hooks, 12mm thick plywood size 6ft x 3ft commercial bwr grade, foam cushion for sofa set size 555x530x 100mm 32 densityduly covered with velvette cloth, prelaminated particleboard 9x6x12mm exterior grade

State Government

TRN :35391340 | 25 Sep, 2025

Tender Value : 0

New Delhi - Delhi

Tender for supply of ci double flanged 600 mm dia non return valve at punjabi bagh bps in ac 26

Central Government/Public Sector

TRN :35374778 | 24 Sep, 2025

Tender Value : 0

Leh - Ladakh

Tender for gem bids for gasket cylinder head cover als, sealing ring als, sealrectangular ring als, gasket als, special washer als, drift oil seal fly wheel hsg als, halogen bulb 24v als, circlip als, house rubber als, pipe coolant pump als, shackle pin als, seal oil for crank shaft frt als, propellershaft sprocket bolt als, stud for inlet manifold mtg als, bushing blank als, fuel pipe feed pump to filter als, hosenonmetallic elbow hose demister als, washer flat als, repair kit als, special gasket for exhaust manifold als, brg tapered roller taper als, assy combination switch r hd arm tata, steering lever left tata, convey lamp tata, cylinder roller brg tata, ball bearing tata, gasket gearcover tata, seal o ring tata, gasket gear housing tata, gasket oil drain tata, assy pressure valve cap tata, bulb15 w tata, air filter element safety tata, pinion withbearing steel tata, suction house complete tata, cartridge lub oil filter tata, rubber house air filter endtata, shim 0.4 mm thick tata, sealing gasket tata, threaded ring tata, assy handle winding regulator tata, cap main brg tata, compression ring tata, ringretaining tata, bearing hub inner tata, crown wheel andtail pinion tata, halogen bulb 24 v tata, threaded pieceunion tata, fixing bracket assy tata, assy motorizedhead lamp 24 rh tata, locking plate tata, gasket turbocharger tata

State Government

TRN :35376123 | 01 Oct, 2025

Tender Value : 46.70 Lacs

Valsad - Gujarat

Tender for comprehensive operation, preventive maintenance & repairs of civil structures, various type of pipeline, various type of valves, storage structures, pumping machineries and electrical equipment etc. located at different head works and sub headwork sites including proper supply of potable water to all the villages/cities for 6 months

Central Government/Public Sector

TRN :35379080 | 24 Sep, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for water, bid number gem2025b6622728 dated 13-09-2025 0 0 bid document1 65 0 0 2 2 angle valve pillar cock, angle cock 15mm, ball valve 1inch pvc, bib cock steel 15 mm, bib cock pvc 15 mm, cistern for western type, cp oblique steel jali 4 inch, cp jetspray health fauset 15 mm dia, cp towel ring, cpvc ballvalve 1 inch, cpvc ball valve 20 mm, cpvc basin elbow20mm, cpvc brass elbow 25mm x 20mm, cpvc brasselbow 15 mmx15 mm, cpvc bushing 1 inch x 3 by 4 inch, cpvc elbow 1 inch, cpvc end cap 15 mm, cpvc fabt 3 by4 inch x half inch, cpvc gum 118 ml pack, cpvc mabt 20x 15mm, cpvc mta 20mm, cpvc pipe 1 inch x 10 feetlong, cpvc pipe 20mm x10 feet, cpvc r socket20mmx25mm, cpvc r tee 20mm x 25mm, cpvc socket25mm x 25mm, cpvc tank nipple half inch, cpvc tee 1inch, cpvc tee half inch, cpvc tee 3 by 4 inch x half inch, cpvc union 1 inch, cp extension nipple 1 pt 5 inch, gielbow 25 mm dia, gi elbow 15 mm dia, gi gate valve 15mm, gi gate valve 25 mm, gi nipple 20 mm x 3 inch, ginipple 20 mm x 4 inch, gi nipple 20 mm x 6 inch, ginipple 25 mm x 3 inch, gi nipple 25 mm x 4 inch, ginipple 25 mm x 6 inch, gi pipe half inch by 15 mm dia isimark 6 mtr long, gi pipe 20 mm dia isi mark 6 mtr long, gipipe 25 mm dia isi mark 6 mtr long, gi reducer elbow 15 x25 mm, gi reducer elbow 25 x 20 mm, gi reducer socket15 mm x 25 mm, gi socket 15 mm, gi socket 20 mm, gisocket 25 mm, gi tee 20 mm dia, gi tee 25 mm dia, gitee 15 mm dia, gi union 20 mm dia, gi union 25 mm dia, gi union 15 mm dia, pvc bend size 4 inch, pvc connectionpipe half inch, pvc connection pipe for geyser size 15 mmdia, pvc flexible pipe 1 inch dia roll of 30 mtr, solventadhesive paste for upvc pipes 50 ml, steel sink 18 inch x16 inch, stop cock brass 20 mm, teflon tape 10 mtr white, upvc bali valve 15 mm, upvc bali valve 25 mm, upvcbend 12 mm, upvc bend 160mm, upvc bend 25 mm, upvc brass tee half inch, upvc bushing 1 inch x half inch, upvc elbow 1 inch, upvc elbow 15mm, upvc elbow 2 inch, upvc elbow 20 mm, upvc elbow 25 mm, upvc fabt halfinch, upvc fabt 1 inch, upvc fabt 2 inch, upvc gum 118ml pack, upvc mabt 1 inch, upvc mabt half inch, upvcnail clamp 1 inch, upvc nail clamp 2 inch, upvc pipe halfinch x 10 feet long, upvc pipe 3 mtrs length 20 mm with isimark, upvc pipe 6 mtrs length 20 mm with isi mark, upvcpipe 6 mtrs length 25mm with isi mark, upvc pipe 6 mtrslength 15mm with isi mark, upvc reducer 1 inch x halfinch, upvc reducer 2 inch x 1 inch, upvc reducer socket3 by 4 inch x half inch, upvc reducer socket 1 inch x halfinch, upvc socket half inch, upvc socket 1 inch, upvcsocket 20 mm, upvc tank nipple half inch, upvc tanknipple 1 inch, upvc tee 12 mm, upvc tee 25 mm, upvctee 3 by 4 inch, upvc union half inch, upvc union 1 andhalf inch, upvc union 3 by 4 inch, urinal pot flat back size440 x 270 x 160 mm with waste pipe with isi mark, washbasin 18 x 12 inch with isi mark, wastage jali 4 inch, waste pipe with clamp, water tank 1000 ltr cap with isimark, water tank 200 ltr cap with isi mark, water tank2000 ltr cap with isi mark, water tank 500 ltr cap with isimark

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Related Searched Keywords : ci valve

List of ci-valve Tenders

Tender for supply of ci double flanged 600 mm dia non return valve at punjabi bagh bps in ac 26

Get ci valve Tender Alert...

Related Searched Keywords : ci valve

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us