Filters

List of ci-rod Tenders

List of latest ci-rod Tenders in Indian Tenders. Click on any ci-rod Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ci-rod Tenders.

All-Tenders (35)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35392685 | 06 Oct, 2025

Tender Value : 0

Burdwan - West Bengal

Tender for gem bids for contactor, elr with cbct 50ma to 750 ma, pt, contactor mnx 185, pwr, 3p, 185a, circuit breaker, mccb, 100a, 415v, 3p, circuit breaker, mccb, 400a, 440v, 3p, 3ph, ictp switch 415 550v, 100a, 3p, ictp switch 415 550v, 300a, 3p, analog voltmeter 0-600v, 96x96m m, contactor, mn x110, 3p, ac3-110a, ac1-16 0a, lux meter with measuring range o to 2000lux, discharge rod 33kv, discharge rod 11kv, dgmultimeter, circuit breaker, mccb, 630a, 415v, 3p, icdpmain switch, ictpn switch, bend pipe ms 90 degree150 mm, bolt with nut full thread ms 5 by 8x2in, cast steel non return valve 150 mm, bolt with nuthalf thread ms 5 by 8x2in, bolt with nut halfthread ms 5 by 8x2.5in, bolt with nut half threadms 5 by 8x3in, bolt with nut half thread ms 5 by8x4in, foot valve cast steel 150 mm, sluice valvecast iron 150mm, packing asb 5 by 8 in round, valvegt sluice, cst stl, 150mm, bolt with nut full threadms 5 by 8x2.5in, bolt with nut full thread ms 5 by8x3in, packing cord rope, abs, 22mm, sheetjointing, 0.25 in, rbr, coupling f-140, tyre, tyrecoupling f-140 with tyre, fenner fenaflex-120 tyrecoupling, 120 spare tyre for tyre coupling, slingchn endlss, 5m, 5ton, as, bearing ball 6413, dpgrv, sngl, 65mm, 160mm, bearing rllr n321, cylndrcl, sngl, 105m m, bearing rllr n318, cylndrcl, sngl, 90m m, bearing ball 6318, dpgrv, sngl, 90mm, bearing rllr nu224mc3, cylndrcl, sngl, bearing ball 6320 dp grv, sngl, 100mm

Central Government/Public Sector

TRN :35393957 | 06 Oct, 2025

Tender Value : 5.00 Lacs

Aizwal - Mizoram

Tender for gem bids for armr, screw driver, plastic box for component, iron frame trolley, revolving working stool iron, circlips pliers, drill bit, aluminium sheet for working table, brass rod 5mm, brassrod 8mm, 7 lever lock, 5 lever lock, weapon rack cap 50

Central Government/Public Sector

TRN :35394054 | 25 Sep, 2025

Tender Value : 1.90 Crore

Mumbai - Maharashtra

Tender for gem bids for sacrificial anode kit, raw water pump impeller witho ring, complete set of belts, return filter, breather filter, suction filter, raw water aj245zink anode kit for aj245, emergency wire rope forlimit switch or emergency wire rope, wire rope 35x7non-comp 2160, dia- 16 mm, l-18 m, drain filter ordrain filter, hydraulic hose for frame in out, oilfilter alamarine jet filter 245, steyr motorscoolant, engine control wiring harness, cylinderhead valve stem seals, transmission fluid, unitinjector plus sealings, telescopic cylinderspherical seal kit or telescopic cylinder sphericalbearing, boat support cylinder spherical bearings, boat support cylinder seal kit, telescopic cylinderseal kit, hydraulic hose for drain, load holdingvalve boat support cylinder, boat supportcylinder rod, battery charger make defa capacity42vac or 12v dc, freq coolant, end module fordcv, spherical bearing for pitch cylinders, shockabsorber cyl. seals kit, hp pressure switch, lppressure switch, main wire rope dia 18mm eachroll 24 mtrs, phase monitoring relay, flexiblehydraulic hose 5 by 8 inch, flexible hydraulic hose3 by 8 inch, flexible hydraulic hose 1 by 2 inch, relay delta contactor, drain filter, hoisting limitswitch, pressure filter, hydraulic hoses, acdcconverter, i-120 or 500vac, o-24vdc, make-schnider, coolant for yanmar engine, 100 hrlyroutine kit propulsion, turbocharger assembly, inlet valve, rod push l-178, v belt, insulator, gasket nozzle, contactor 45kw, leveltemperature switch, konrad oil 660, circuitbreaker, shaft collar, anode gimbal housing, anode gasket, anode trim cylinder, screw, anode, konrad hose, complete set of hoses, siemhoofdsch 125a compl siemens mainswitch 125acomplete, wire rope 35x7 compacted 2160 dia- 18mm, l- 23m, accumulator charge and dischare valve, flexible hydraulic hose 3 by 4 inch 19 mm l 540 mm, flexible hydraulic hose 3 by 4 inch 19 mm l 1100 mm, timer make siemens, relay 24v dc make omron, accumulator bladder, painter boom load holdingvalve, circlip telescopic cylinder rod eye bearingguide, revolution sensor, oil filter return filter, coolant for enginesacrificial anode kit, part no.- konrad660-anode, rawwater pump impeller with o ring, part no.-yan6ly2autp- impeller, complete set of belts, partno.- yan6ly2autp-belts, sacrificial anode kit, part no.-yan6lay2autp- anode, return filter, part no.- bl1-35110, breather filter, part no.- bl1-10158/ bi1-10158, breather filter, part no.- bl1-10106, suction filter, part no.- bl1-35181/35109/ bi1-35181, raw water aj245zink anode kit for aj245, part no.- k9919, emergencywire rope for limit switch/ emergency wire rope, partno.- 41620, main wire rope, part no.- 40898, returnfilter, part no.- bl1-35502, suction filter, part no.- bl1-35002, hydraulic hose for frame in/out, part no.-31653, oil filter alamarine jet filter 245, part no.-10560, steyr motors coolant, part no.- z011785/0, engine control wiring harness, part no.- b12-30563

Central Government/Public Sector

TRN :35396258 | 25 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for yag laser rod, transistor type du 12155 power regulator, semiconductor devices unitized dual n and p 7343, microcircuit 74hc4051b, micro circuit 1c lm2903 dual camp, micro circuit linear type lp2951cm, micro circuit digitaltype sr 4094b

State Government

TRN :35396507 | 25 Sep, 2025

Tender Value : 34.27 Lacs

Raigad - Maharashtra

Tender for borewell drilling 150 mm dia by dth machine including transporting of machine at worksite, providing & placing 180 mm dia 6 kg p.v c.casing pipe (l5:4985-1988) & fixing borecap after complation of borewell, yield testing of borewell by 90 degree v notch method for minimum 2 hrs .continously, providing cap for 180 mm dia p.v.c.casing pipe, casing pipe lowering & grouting, solar system, supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintained for 5 years. 3 bhp solar pump construction of bandhara, clearing cutting thorny shurbes, bushes , mooleyhills etc. complete, excavation in hard murum/hard man kankar/pebbles, exceeding 1.5m in width including depositing the material as directed with all lead upto 15m and lift into 1.5m including boulders of size less than 0.10cum including dressing etc complete. excavation in soft rock exceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10cum, dressing etc complete. excavation in hard rock exceeding 1.5m in width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of size exceeding 0.10cum including dressing etc complete providing and laying rubble soling below foundation in layers including fillinf with rubble chips murum etc. complete (excluding royalty material) providing and laying in situ cement concrete of grade m-150 of trap / granite / gneiss /quartzite graded metal for pcc with or without surface reinforcement rcc/concreting requiring heavy or spetial type of shuttering for works of gallery ,sluice,spillway crest,spillway down stream face,energy dissipating structure,inteke structure,training walls,piers abutments etc.with concrete mixture considering lead of 50 m with shuttering and scaffolding ,placing ,compacting,curing etc.complete with an initial lead of 50 m and lift of 1.50 m. providing & laying in position tor steel reinforcement including cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m providing casing embankment using selected previous material available directly from excavation in layers including cost of all other operations such as collection of material spreading material in layer of specified thickness sorting out breaking clods levelling sectioning edges sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1km for watering and 6m lift. providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. providing and fixing 90 cm x 60 cm marble plate engraving 10 cm.height letter ,figures including painting the lefters/ figures withapproved colour and shade complete " "rcc well providing and laying in situ cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete." providing & costing in constructing in situ. c.c of trap granite/ quartzite / gneiss/ metal of approved quality of r.c.c. work as per detailed drawing & design or as directed by engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with c.m. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( by weight batching & mix design for m-250 & m-300 only use of l&t, acc ambuja, birla gold, manikgad, rajashree etc. cement is permitted excluding m.s or tor reinforcement in r.c.c. m-250grade. 1) r.c.c. m-250for beam " 2) r.c.c. m-250 for vertical wall providing & fixing in position steel bar reinforcement of various diameters for r.c.c. pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). tor steel" providing & laying weep holes of 80 mm ac/pvc pipe as per drawing for abutment returns, return walls etc. complete. dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by engineer-in-charge (including cost of machinery labour fuel )etc complete. providing rubble stone paving 15cm thick in 1:3 cement mor tar over bedding of 15cm thick cement concrete of 1:4:8 propor t ion wi th t rap / grani te / quar tzi te / gneiss metal including st r iking joints and water ing etc. complete." providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete." reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. providing and fixing in position c.i. dapuri steps or 22 mm dia. m.s. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer- in-charge." providing and fixing 90 cm x 60 cm marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. lift 0.00 m to 1.50 m" "switch room excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a- 1/259)" excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-2/259) providing and laying in situ cement concrete in m – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. "providing second class burnt brick masonry with convent ional/ i.s.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. complete " providing and casiting in situ cc of trap /granite/quartzite/gneiss metal of approved quality for r cc work as per detailed drawing and designs or as diredcted by engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withcm 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. slabs b) in rcc m-200" providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. item no 8 :- filling the plinth & floors murum bedding in trenches with approved murum from excavatyed materials form foundation 15 cm. to 20 cm. layers including watering and compaction complete. providing and laying cement concrete flooring 40 mm thick wi th m15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. with natural sand providing and fixing frame wi th / wi thout ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete item no. 11 :- providing and fixing count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete item no. 12 :- providing and fixing count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete item no.13 :- providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. item no.14 :- providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. item no. 15 :- providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete item no. 16 :- providing and fixing in position steel bar reinforcement of various diamenters for rcc piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) "pumping machinery item no. 1 :- providing, erecting and giving test of submersible pump set conforming to is 8034 and motor conforming to is 9283, with water proof winding. pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415 v ± 10%, 3 ph, 50 hz a.c. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge out let as per manufacturer's design. antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages" "item no. 2 :- supplying and erecting, flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed. 3 core 10sqmm" "item no. 3 :- supplying and erecting fully automatic star delta starter to operate squirrel cage induction motor working on 380- 440 volt, 3 phase, 50 hz with no volt coil, over load element, and on off push buttons, with necessary material and connected to supply, etc complete. starter with original sheet steel encloser. > 7.5 hp & up to 12.5 hp" item no.4 :- providing , installing & commissioning main control pannel board including v.meter & a. meter of suitable range single phase prevention 8 nos. of phase indicater lamps with colour glass of 230 v rotary switch over load capacitor suitable for 7.50hp and 12.50bhp pump etc.complete. (market rate) "item no.5 :- providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. pressure gauge shall be installed as directed, with tapping on rising main. pressure gauge (100 mm dia)" item no.6 :- providing tools for pumping. item no. 7 :- main wiring work from m. s. e. b. cut out to the panel board 4 core x 459 mm 1100 grade with i. s. i. mark standard / aluminum armored cable (94.1 p.36) item no. 8 :- providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep "solar pump item no.1 :-supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintaince for 5 years " "rising main item no. 1:- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm item no.3 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no. 4 :- providing, erecting, connecting double flanged short body pattern tye manually operated butterfly valve having body, disc and end cover in graded cast iron to is 210 gr. cf 200 generally conforming in bs 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding c.c. foundation/ structural steel support confirming to is 3095-1991. sluice valves 80 mm dia for washout" "item no. 5 :- providing and supplying air valves as per is-10845 and mjp’s standard specifications of approved mark and quality of following diameters including all taxes (central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete. air valves 15 mm dia" "item no.6 :- excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (earth soil)" "item no. 7 :- excavation for foundation/pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (hard murrum)" "item no.8 :- excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. soft rock" "item no.9 :- excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. lift 0 to 1.5 m hard rock" item no. 10 :- filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. "item no. 11 :- lowering, laying and jointing h. d. p. e./ m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm "item no. 12 :- lowering laying and jointing in position following c.i.d/f reflux valves butterfly valves and sluice valves including cost of all labour joining material, including not bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of sluice valves) sluice valves 80 mm dia for washout" "item no. 13 :- lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. air valves 15 mm dia" "item no. 14 :- providing and fixing in position air valve shaft including providing and fixing gi medium class or 6 mm thick m.s. pipe shaft 2.70 m long over branch flange of air valve tee, providing pcc block of m-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in pcc m-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on murum & harder strata" item no 15 :- providing and laying in situ following grades of c.c. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. "item no. 15 :- providing and constructing b.b. masonry valve chamber with 15 cm thick 1:3:6 proportion pcc bedding, including excavation, b.b. masonry in c.m. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing c.i. manhole frame and cover in rcc 1:2:4 coping or cm thick slab etc. complete as directed by engineer-in-charge. size 0.90 x 0.60 x 1.20" item no. 16 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 17 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia hdpe pipe 8 kg/sqcm" "distribution system item no .1 :- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 2 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no.3 :- providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete sluice valves 50 mm dia" "item no 4 :- excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-1/259) earth soils" "item no. 5 :- excavation for foundation / pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bda-3/259) hmb" "item no. 6 :- excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking as directed by engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-4/259) soft rock" "item no. 7 :- excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (bd-a-6/259) hard rock" item no. 8 :- filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd-a-10/263) "item no. 9 :- lowering, laying and jointing h. d. p. e./m.d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 63 mm dia hdpe pipe 6 kg/sqcm" "item no. 10 :- lowering, laying and jointing in position following c.i.d/f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valves.) sluice valves 50 mm dia" "item no. 11 :- providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m-300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) a) 1:2:4 (m-150) grade " "item no. 12 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg) " item no. 13 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 14 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 15 :- providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x35 x3 mm frame with properly cross braced m.s.angles of size 35 mm x 35 mm x 3 mm duly painted including two m.s.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.spec. number as directed by engineer in charge morth 801 item no. 16 :- providing and making upvc/mdpe pipe consumer service connection on distribution main by drilling hole with suitable means , including all labour , upvc/mdpe pipe of required length with or without road crossing as described below, including cost of specials like saddle/clamp saddle of suitable material, and diameter suitable for distribution main, 15mm /20mm/ 25mm respective dia heavy duty brass/polyprophylyne(twin jacketed ) ferrule , male and female thread adapter elbow, bends,couplers ,tees, clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, gi casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by engineer in "trial run item no. 1 commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by mjp / local body and handing over the scheme to local body after completion of the above period as directed by engineer-in-charge.note: required chemicals to be supplied by department free of cost and electricity bill will also be paid by the department.for singlvillage" piped water supply scheme at - adnale tal- tala

Central Government/Public Sector

TRN :35397286 | 24 Sep, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for oil, oil filter, fuel filter, blower assy bearing, bearing, oilpressure guage, temp gauge, benjo, o ring, tappetgasket, hub assy seal, push button, fuel fillter, rubbercoupling, mounting pad, adjusting nut, miniature circuitbreaker, fuse, tie rod end, nipple, nut bolt, bolt, clamp

Central Government/Public Sector

TRN :35397601 | 25 Sep, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for copper alloy tapsstop valves v2 conforming to is 8931q3 plastics bib taps pillar taps angle valves and stopvalves as per is 97632000 latest q3 connection pipewith nuts v2 q3 tower bolts ferrous metals as per is204 q3 wire mesh fabric or cloth v2 as per is 1568q3 alm hydraulic door closer brass internal fittingspindle for 15mm bib tap gi pipe med grade 20mm kitchen rack stainless steel 24inch x 24inch x 10inch plainglass sheet 3mm thick size 4 feetx 3feet pvc internalfitting for llc cistern 10 ltrs capacity pvc swr pipe110mm 3 mtr length wc indian type vitreous china whiteorrissa pattern size 580x440mm alm door stopper floor75mm aluminium sheet 063mm thick in 4feet width x10mtr roll cement of 50 kg bag cp brass ss towel rail20mm dia 450mm long flashing tape bitumen sealingtape of size 15mtr x 100mm x 1 point 5mm thick frostedglass sheet 3mm thick size 6 feetx4feet gi pipe med grade15 mm isi marked gi pipe med grade 25mm isi marked gi socket 15mm ms door spring rat rail type 200mm mspowder coated curtain rod 20mm dia in 12 feet length oilputty wood pvc swr pipe 75mm type b 3mtr length tower bolt almn 200 mm vitreous china urinal white flatback of size 465x355x265mm wash hand basin whitevitreous china of size 550x400mm wc european typewhite vitreous china alm butt hinge 100mm brassinternal fitting spindle long for 15mm dia concealed stopcock ss grating round 100mm dia ss grating round100mm dia with waste hole gi elbow 15mm gi elbow20mm gi union socket 15mm gi union socket 20mm ms butt hinges 100 mm ms butt hinges 75 mm ms nailswire 25mm ms plug 15mm ms plug 20mm ms screwwood 25mm in 100nos pkt ms screw wood 35mm in100nos pkt ms sliding door bolt 250mm complete with nut bid number gem2025b6638053 dated 15-09-2025 bid document1 137 1 1 bolt, m seal 100gm pack, pvc handle suitable for llflushing cistern 10ltrs capacity, pvc swr bend 100mmwith access door, pvc swr bend 75mm with access door, sliding door bolt almn 250mm, sliding door bolt ms 300mm, white cement 1 kg pack, ss brackets for 20 mm curtainrods, ss wall to wall brackets for 20 mm curtain rods, ssfinials for 20 mm curtain rods, full turn spindle 3 no, mixture spindle, tank cover for 500 or 1000 ltr tank, whbglass shelves 8 mm thick in rectangular shape of 45x12 cm, yellow color road stud of abs material, solar light roadstud of aluminium material, convex mirror of size 40 inchfor road, factory made flush shutter of size 900 x 2100 x35 mm, plain glass sheet 4mm thick size 2feetx 3feetfrosted, glass pane 3 feetx2feetx4 point 8mm plain, glasspane 3feetx2feetx4mm plain, wire mesh zero point 36mmnormal dia, double spring floor machine, door springhelical 150mm, putty for fixing glass, gi tee 20mm, gitank nipple 15 mm dia, gi tank nipple 15 mm dia, haspand staple 75mm dia, gi tee 15mm dia, stainless steelknob for curtain rod 25mm, stainless steel bracket forcurtain rod 25mm, ss wall to wall bracket for 20 mm forcurtain rod isi marked, gi tank nipple 20mm dia, hasp andstaple 100mm size, rubber strip for door seal, 30mm thickwire gauge shutter of size 900 x 2100 mm factory madesolid core s steel 36 gauge, stainless steel knob lock fordoor lock, kitchen plate rack stainless steel 24 inch x 36inch x 10 inch, cp hand shower rose 150mm, pvc pipe32mm, towel rack cp, double action spring hinges mswith steel wire spring stove enamelled black 150mm, rubber beading for ai door, galavanised ms wire clothzero point 63mm dia and average width of aperture 1 point4mm, m.s screws 3 oblique 4inch, gi socket reducer 15 x20mm dia, piano type butt hinges flap 3 oblique 4inch, cpvc pipe 16mm outer diameter 5 mtr length, ms haspand staple wire type stove enamelled 100mm size, mshasp and staple wire type stove enamelled 75mm size, cpvc pipe 20mm outer diameter 5 mtr length, non returnvalve 150mm isi marked, gi tubing 50mm med grade, gitubing 25mm med grade, gi tubing 20mm med grade, gitubing 40mm med gde, gi tubing 15mm med grade, gisocket 25mm, gi union 50mm, gi tee 15mm, gi tee50mm, gi union 15mm, gi union 20mmalm hydraulic door closer, brass internal fitting spindle for15mm bib tap, gi pipe med grade 20mm, kitchen rackstainless steel 24 x 24 x 10, plain glass sheet 3.00mmthick size 4x 3, pvc internal fitting for low level flushingcistern 10 ltrs cap, pvcswr pipe 110mm 3 mtr length, wci type vitreous china white orrissa pattern size580x440mm, alm door stopper floor 75mm, aluminiumsheet 0.63mm thick in 4 widthx10mtr roll, cement of 50 kgbag, cp brass/ ss towel rail 20mm dia 450mm long, flashing tape bitumen sealing tape of size 15mtr x 100mmx 1.5mm thick, frosted glass sheet 3.00mm thick size 6x4, gi pipe med grade 15 mm, gi pipe med grade 25mm, gisocket 15mm, ms door spring rat rail type 200mm, mspowder coated curtain rod 20mm dia in 12 length, oil puttywood, pvcswr pipe 75mm type b, 3mtr length, towerbolt almn 200 mm, vitreous china urinal white flat back ofsize 465x355x265mm, wash hand basin white vitreouschina of size 550x400mm, wc e type white vitreouschina, alm butt hinge 100mm, alm hasp & staple 100mm, brass internal fitting spindle long for 15mm dia concealedstop cock, cpms/ss grating round 100mm dia, cpms/ssgrating round 100mm dia with waste hole, gi elbow 15mm, gi elbow 20mm, gi long screw nipple 15mm- 200mm long //bid details2 / 137

Central Government/Public Sector

TRN :35387390 | 04 Oct, 2025

Tender Value : 96.9 Thousand

Bangalore - Karnataka

Tender for gem bids for repair, clutch cable m gypsy, hose pipe clamp m gypsy, petroloverflow reservoir m gypsy, pinion assy m gypsy, ce debush m gypsy, niddle bearing m gypsy, lathe work caramb, wheel bearing car amb, seat belt full assy swiftdzire, fly wheel ring als, solenoid switch als, bush setals, pilot bearing als, shock absorber m gypsy, roadspring assy front m gypsy, suspension kit m gypsy, centre bolt m gypsy, air filter m gypsy, crank shaft oilseal als, chain sprocket hero honda, cushion rubberhero honda, wheel bearing hero honda, oil filter royalenfield, seat repair tata safari, side mirror indicatorrepair tata safari, rear break shoe royal enfield, fuelpipe royal enfield, break light switch spring royal enfield, air compressor gas kit seal als, ac filter maruti ciaz, airfilter maruti ciaz, pressure pipe 2 mtr atf, pipe adapteratf, accelerator cable hero honda, ignition switch herohonda, solenoid switch army bus, bush set all army bus, pinion lock army bus, break shoe rear royal enfield, dooractuator with latch assy swift dzire, labor charge swiftdzire, belt water pump maruti ciaze, air filter maruti ciaze, freedom service camp maruti ciaze, head light bulbmaruti ciaze, nozzle washer maruti ciaze, brake pad frontmaruti ciaze, brake liner rear maruti ciaze, balance rodbush maruti ciaze, ac filter maruti ciaze, relay 12v maruticiaze, oil filter maruti ciaze, fuel filter maruti ciaze, fuse12v maruti ciaze, spark plug maruti ciaze, gas kit maruticiaze, labour charge maruti ciaze, km cable royal enfield, cabin lifting pump o h als, cabin ramp assy o h als, wiper set army bus, wiper linkage set army bus, wipermotor gear 2.5 ton, break booster diaphragm rubber 2.5ton, knuckle post bolt 2.5 ton, combination switch als, rotary switch als, clutch plate liner with reviting als, clutch km cable als

Central Government/Public Sector

TRN :35387930 | 24 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for mt, fog lamp bulb, relay assy, jalwa horn, wiper blade front600 m s bcs, fog light bulb, bulb for fog lamp, bulb h3fog lamp, fan belt engine, relay solid state, wiper bladeof ciaz, assy combination switch, solenoid, head lampbulb a 12v 45 40wd in 72601, terminal base assy, steering tie rod end, steering ball joint, air filter element, ac filter, dash board lock, element oil filter, air filterelement, brake shoe assy, brake shoe assy front wheel, rear view mirror rh, chain sprocket kit, stand comp mainnh 1, dash board lock for ciaz, hose water inlet

State Government

TRN :35365771 | 27 Sep, 2025

Tender Value : 0

Dhar - Madhya Pradesh

Tender for gem bids for gi pipe 32 mm, gi pipe socket 32mm, handpump nutbolt, handpump bearing, handpump complete, handpump assembly complete, handpump head, handpump handle, ms rod 10 feet, handpump standt, starter 75 hp, starter 30 hp, starter 15 hp, cinon return valve 6 inch, sluice valve 4 inch, flange rubber washer 4 inch, flange rubberwasher 6 inch, gi pipe 6 inch 6 meter, gi pipe 3 inch 6meter, vertical open well motor pump 50 hp 6 stage, open well horizontal motor pump 30 hp

Related Searched Keywords : ci rod

List of ci-rod Tenders

Tender for gem bids for armr, screw driver, plastic box for component, iron frame trolley, revolving working stool iron, circlips pliers, drill bit, aluminium sheet for working table, brass rod 5mm, brassrod 8mm, 7 lever lock, 5 lever lock, weapon rack cap 50

Tender for gem bids for yag laser rod, transistor type du 12155 power regulator, semiconductor devices unitized dual n and p 7343, microcircuit 74hc4051b, micro circuit 1c lm2903 dual camp, micro circuit linear type lp2951cm, micro circuit digitaltype sr 4094b

Get ci rod Tender Alert...

Related Searched Keywords : ci rod

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us