Filters

List of carbon-block Tenders

List of latest carbon-block Tenders in Indian Tenders. Click on any carbon-block Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for carbon-block Tenders.

All-Tenders (10)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35756641 | 21 Nov, 2025

Tender Value : 62.75 Lacs

Jaisalmer - Rajasthan

Tender for gem bids for local, adhesive incise drape 25 by 30cm adhesive incise drape 5by 15cm apparatus anaesthitic face mask with air cushiontransparent size 0 infant apparatus anaesthetic facemaskwith air cushion transparent size 1 paediatric apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium apparatus anaesthetic facemask antistatic with air cushion transparent size 3 adultwith valve apparatus anaesthetic face mask antistatic withair cushion transparent size 4 apparatus oxygen inhalationportable tubing 1 meter with connector for angiocath 15 gover the needle 4 and half inch catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10 length 45 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm chest drainage system disposable gown disposable shoe cover ecg electrodesdisposable laryngoscope adult bulb for laryngoscopeinfant bulb for long iv line 15 g 100 cm long iv line 18g of 70 cm long iv line 18 g of 100 cm endotrachealtube with bronchial blocker 6 point 0 mm to 9 point 0 mm mapleson non rebreathing system bains circuit nasalcannula adult nasal cannula paediatric needle epiduralanaesthesia with luer lock fitting with styllet 15 g ss needle epidural anaesthesia with luer lock fitting with styllet18 g ss needle spinal anaesthesia with luer lock fittingwith styllet 25 g ss mask for nebulizer outfit venouspressure manometer complete paediatric anaestheticcircuit complete non-rebreathing system pressuremonitoring line 100 cm or 200cm male or female rapidinfusion set short ledercath 20g 8 to 10 cm long withintroducer needle and guide wire three way stop cock bid number gem2025b6822692 dated 31-10-2025 bid document1 134 1 1 plastic, triple lumen catherer kit cannula guide wiredilator introducer needle, tube rubber left and rightendotracheal intubation with 2 ballons and 2 pilot bags withsuction tube size large, tube endotracheal reinforced pvcsize 3 point 0 with out cuff, tube endotracheal reinforcedpvc size 3 point 5 with out cuff, tube endotrachealreinforced pvc size 4 point 0 with out cuff, tubeendotracheal armoured styllet for, tube endotrachealcatheter mount for, tube endotracheal nasal size 2 point 5without cuff, tube endotracheal nasal size 3 point 0 withoutcuff, tube endotracheal nasal size 3 point 5 without cuff, tube endotracheal nasal size 4 point 0 without cuff, tubeendotracheal nasal size 4 point 5 without cuff, tubeendotracheal nasal size 5 point 0 with cuff, tubeendotracheal nasal size 5 point 5 with cuff, tubeendotracheal nasal size 6 point 0 with cuff, tubeendotracheal nasal size 6 point 5 with cuff, tubeendotracheal nasal size 7 point 0 with cuff, tubeendotracheal nasal size 7 point 5 with cuff, tubeendotracheal nasal size 8 point 0 with cuff, tubeendotracheal oral with inflatable cuff tube and pilot bag 7point 5 mm internal diameter, tube endotrachealreinforced pvc size 7 point 5 with cuff, tube endotrachealreinforced pvc size 8 point 0 with cuff, tube tracheostomywith inflatable cuff size 35 fg, tube tracheostomy withinflatable cuff size 39 fg, laproscopic coliscytectomyprocedure drape sheet, foleys balloon catheter 2 waysilicon 16 g, foleys balloon catheter 2 way silicon 18 g, foleys balloon catheter 2 way silicon 20 g, foleys ballooncatheter silicon size 8 fr, hand gloves size 6 and half pairof, hand gloves size 7 pair of, knife bard parker blade size1 fitting commercial no 10 packet of 6, knife bard parkerblade size 1 fitting commercial no 11 packet of 6, knifebard parker blade size 1 fitting commercial no 12 packet of6, knife bard parker blade size 1 fitting commercial no 15packet of 6, knife bard parker blade size 2 fittingcommercial no 20 packet of 6, knife bard parker blade size2 fitting commercial no 22 packet of 6, knife bard parkerblade size 2 fitting commercial no 23 packet of 6, suctiondrain, syringe disposable plastic sterile 2 ml with needle, syringe disposable plastic sterile 5 ml with needle, syringedosposable plastic sterile 10 ml with needle, syringedisposable 20 ml, syringe disposable 50ml, strip indicatorsfor sterilisation control for testing sterility of drums, armband disposable tourniquet, percutaneous tracheostomy kitset complete with forceps or dilators and tracheostomy tube8 point 0 mm, clavicle brace small or medium or large, long knee brace large, long knee brace medium, kneecap elastic xl, knee cap elastic large, knee cap elasticmedium, knee cap elastic small, hinged knee brace withopen patella, flexible open patella knee brace large, flexible open patella knee brace medium, heel cup siliconor carbon copolymer, pelvic binder size m or l or s orxxl, lumbosacral belt support size s or m or l or xl orxxl, skin stapler remover, adhesive plaster zinc oxide 2point 5 cm by 1 mtr, adhesive plaster zinc oxide 7 point 5cm by 5 mtr, adhesive plaster micro porous tape 1 inch boxof 12, adhesive plaster micro porous tape 2 inches box of 6, adhesive plaster micro porous tape 3 inches box of 4, abdominal binder 10, bandage crepe 10 cm, bandagecrepe 15 cm, bandage open woven for plaster of paris10cmx5m, bandage open wove uncompressed 6 cm by 4metres, bandage open wove uncompressed 10 cm by 4metres, bandage plaster of paris 10 cm by 3 metres, //bid details2 / 134 / / 1 1 /item categorybandage plaster of paris 15 cm by 3 metres, bandage tshaped, bandage comfortable casting 7 point 5cm by 3point 6 cm, bandage comfortable casting 12 point 5cm by 3point 6 cm, bandage dvt stocking small, bandage dvtstocking medium, bandage dvt stocking large, cottonwool absorbent pkt of 500 gm, cotton wool non absorbentpkt of 500g, dressing medicated adhesive 25 cm by 6 cm ina single strip pack, dressing first aid unmedicated sterilepack, dressing medicated gauze paraffin 10 cm by 10 cmtin of 24, dressing, shell compressed, dressing woundcare occlusive and hydrocolloid dressing with flexible foampadding for optimum healing 10cm by 10cm box of 5, dressing wound care occlusive and hydrocolloid dressingwith flexible foam padding for optimum healing 20cm by20cm box of 3, dressing extra thin wound care 10cm by10cm box of 5, dressing extra thin wound care 20cm by20cm box of 3, preop adhesive drape 28 cm by 30 cm, dressing silicon gel sheet 5 inch by 4 point 5 inch, dressingwound care non adhesive 3 by 3 inches, dressing woundcare non adhesive 4 by 4 inches, dressing postopmedicated 6 by 7cm pack of 100 dressings flexigrid, dressing postop medicated 10 by 12 cm pack of 50dressings flexigrid, dressing wound 10 by 20 cm, dressingsterile 4 inch by 4 inch box of 5, dressing sterile 8 inch by 8inch box of 3, dressing collagen wound management size 2inch by 3 inch, dressing collagen wound management size8 inch by 14 inch, dressing collagen wound managementmaterial 5 ml, dressing collagen wound managementmaterial 15 ml, gauze absorbent folded 1 cm by 100metres, haemostatic gauze chitosan, pad abdominal swab25 by 25 cm with tape 30 cm, pad abdominal swab 40 by25 cm with tape 30 cm, suspensory scrotal, surgeons capsdisposable, surgeons mask disposable, haemostatic clipstitanium haemostatic clips extra large, haemostatic clipstitanium haemostatic clips large, haemostatic clipstitanium haemostatic clips medium, haemostatic clipstitanium haemostatic clips small, linear cutter reload unitblue cartidge for use with safety lock out 75mm, meshprosthesis for hernia small polypropylene mesh size 6 by 11cms composite light wt mesh of polypropylene andpolygalactin 910 polygycolic acid size 6 by 11 cms, monofilament polyglyconate synthetic absorbable suturesize 1 by 0 70 to 75 cm 1 by 2 circle taper cutting 20 to 30mm, monofilament polyglyconate synthetic absorbablesuture size 2 by 0 70 to 75 cm 1 by 2 circle taper cutting20 to 30 mm, monofilament polyglyconate syntheticabsorbable suture size 3 by 0 70 to 75 cm 1 by 2 circletaper cutting 20 to 30 mm, polyamide monofilament size 1by 0 100 cm 1 by 2 circle rb 40 mm, polyamidemonofilament size 2 by 0 70 to 80 cm 3 by 8 circle reservecutting 40 to 45 mm, polyamide monofilament size 3 by 070 to 80 cm 3 by 8 circle reverse cutting 25 to 30 mm, polyamide monofilament size 4 by 0 40 to 50 cm 3 by 8circle cutting 15 to 20 mm, polydioxanone size 1 150 cmsloop 1 by 2 circle rb needle 50 to 55 mm, polydioxanonesize 1 90 cms 1 by 2 circle needle 40 to 45 mm, polydioxanone size 1 by 0 70 to 75 cms 1 by 2 circle rb 40to 45 mm, polydioxanone size 4 by 0 70 to 75 cms 1 by 2circle rb needle 12 to 15 mm, polydioxanone size 5 by 070 to 75 cms 1 by 2 circle rb needle 12 to 15 mm, polyglicaprone size 3 by 0 70 to 75 cm 3 by 8 circle cutting20 to 25 mm, polyglicaprone size 4 by 0 70 to 75 cms 3 by8 circle reverse cutting 15 to 20 mm, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 1 by 2 circle //bid details3 / 134 taper cut 25 mm double needle, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 4 by 0 and 3 by 8 circle rb, polypropyleneblue monofilament 70 to75 cm size 1 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 1 by 0 and 3 by 8 circle reverse cutting 12mm, polypropylene blue monofilament 70 to75 cm size 4 to0 and 1 by 2 circle rb 13 mm double needle, polypropylene blue monofilament 70 to 75 cm size 4 by 0and 3 by 8 rb 12 mm, polypropylene blue monofilament 70to 75 cm size 5 point 0 3 by 8 rb 24 mm, polypropyleneblue monofilament 70 to 75 cm size 6 point 0 rb 26 mmneedle, polypropylene blue monofilament 70 to 75 cm size2 to 0 and 3 by 8 circle reverse cutting 12 mm, silkbraided size 1 by 0 70 to 76 cms taper cut 1 by 2 circleneedle 25mm, skin stappler with stainless steeel staples, synthetic absorbable polygalactin 910 rapid absorptionsize 2 by 0 and 80 to 90 cm circle cutting 30 to 40 mmdouble arm, synthetic absorbable polygalactin 910 orpolyglycolic acid coated with polycaprolate size 1by 0 and70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, syntheticabsorbable polygalactin 910 or polyglycolic acid coatedwith polycaprolate size 2 by 0 and 70 to 90 cms and 1 by 2circle rb 30 to 40 mm, synthetic absorbable polygalactin910 or polyglycolic acid coated with polycaprolate size 3 by0 and 70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, synthetic absorbable polygalactin 910 or polyglycolic acidcoated with polycaprolate size 4 by 0 and 70 to 90 cms and1 by 2 circle rb 16 to 20 mm, face mask 3 ply, tubefeeding smooth plastic infant 38 cm long 5 f with redflexible connector for nasogastric feeding, tube rectalflatus size 18 catheter gauge, urinary leg bag 540ml, nasogastric tube adult 100cm long 14g, naso gastric tube adult100cm long 16g, naso gastric tube adult 100cm long 18g, naso gastric tube adult 100cm long 20gadhesive incise drape 25x30cm, adhesive incise drape5x15cm, apparatus anaesthitic face mask with air cushiontransparent size 0 infant, apparatus anaesthetic facemaskwith air cushion transparent size 1paediatric, apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium, apparatus anaesthetic facemask antistatic with, air cushion transparent size 3 adultwith valve, apparatus anaesthetic face mask antistaticwith air cushion transparent size 4, apparatus oxygeninhalation portable tubing 1 meter with connector for, angiocath 15 g over the needle 4 1/2, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10, length 45 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm, chest drainage system, disposable gown, disposable shoe cover, ecg electrodesdisposable, laryngoscope adult bulb for, laryngoscopeinfant bulb for, long i v line 15 g 100 cm, long i v line 18g of 70 cm, long i v line 18 g of 100 cm, endotracheal tubewith bronchial blocker, 6.0 mm-9.0mm, mapleson nonrebreathing system bains circuit, nasal cannula adult, nasal cannula paediatric, needle epidural anaesthesia withluer lock fitting with styllet 15 g ss, needle epiduralanaesthesia with luer lock fitting with styllet 18 g ss, needle spinal anaesthesia with luer lock fitting with styllet25 g ss, mask for nebulizer, outfit venous pressuremanometer complete, paediatric anaesthetic circuitcomplete non-rebreathing system, pressure monitoring line //bid details4 / 134

corporations/Associations/Others

TRN :35733384 | 17 Nov, 2025

Tender Value : 2.44 Lacs

Kalpakkam - Tamil Nadu

Tender for gem bids for supply and safe delivery of 100 gpd reverse osmosis romembranes, suitable for use in 50 lph ro plants. makes-hi-tec, konvio neer, film tec, aqua, aqua dove, supply andsafe delivery of 20inchx2.5 inch granular activated carbongac filter cartridges for use in commercial ro filtrationsystems makes-kr plus, hi tech, konvio neer, doc, ampereus, supply and safe delivery of20inch x2.5 inch cto chlorine, taste, odor block carbon filter cartridges for use incommercial ro filtration systems.makes-kr plus, hitech, konvio neer, doc, ampereus, supply and safe deliveryof 20-inch x 2.5-inch wound sediment filter polypropyleneyarn cartridges for, commercial ro filtration systems., supply and safe delivery of 10 inch standard inline postcarbon filter cartridges for domestic, commercial ro waterpurification systems, supply and safe delivery of membranehousing suitable for 100 gpd ro membranes used incommercial ro systems., supply and safe delivery of 20-inch slim type filter housing suitable for standard 2.5 inchdiameter sediment, carbon, or pre-filters used in rosystems, supply and safe delivery of 10mm pvc flexibletube suitable for ro water systems ., supply and safedelivery of 6 mm pvc flexible tube suitable for ro watersystems ., supply and safe delivery of jumbo filter housingbig blue type suitable for 20-inch x 4.5-inch filter cartridgesfor commercial ro systems., supply and safe delivery of10-inch x 2.5-inch sediment filter polypropylene cartridgesfor domestic ro filtration systems., supply and safedelivery of 10inch x2.5 inch granular activated carbon gacfilter cartridges for use in industrial, commercial ro filtrationsystems makes-kr plus, hi tech, konvio neer, doc, ampereus, supply and safe delivery of wall-mountable ro filtercabinets suitable for 25 lph systems, including mountingbrackets and all necessary wall-mounting accessories make-whale 25lph, supply and safe delivery of 20-inch x 4 -inchjumbo wound sediment filter polypropylene yarn cartridgesfor commercial ro filtration systems. //bid details2 / 22

corporations/Associations/Others

TRN :35736873 | 17 Nov, 2025

Tender Value : 2.44 Lacs

Chengalpattu - Tamil Nadu

Tender for supply of ro spares - suitable for use in 50 lph ro plants. makes-hi tec,konvio neer,film tec,aqua,aqua dove , supply and safe delivery of 20inchx2.5 inch granular activated carbon gac filter cartridges for use in commercial ro filtration ??? ??? ? ?? ??? /item category systems makes-kr plus,hi tech,konvio neer,doc,ampereus , supply and safe delivery of20inch x2.5 inch cto chlorine, taste, odor block carbon filter cartridges for use in commercial ro filtration systems.makes-kr plus,hi tech,konvio neer,doc,ampereus , supply and safe delivery of 20-inch x 2.5-inch wound sediment filter polypropylene yarn cartridges for ,commercial ro filtration systems. , supply and safe delivery of 10 inch standard inline post carbon filter cartridges for domestic,commercial ro water purification systems , supply and safe delivery of membrane housing suitable for 100 gpd ro membranes used in commercial ro systems. , supply and safe delivery of 20 inch slim type filter housing suitable for standard 2.5 inch diameter sediment, carbon, or pre-filters used in ro systems , supply and safe delivery of 10mm pvc flexible tube suitable for ro water systems . , supply and safe delivery of 6 mm pvc flexible tube suitable for ro water systems . , supply and safe delivery of jumbo filter housing big blue type suitable for 20-inch x 4.5-inch filter cartridges for commercial ro systems. , supply and safe delivery of 10-inch x 2.5-inch sediment filter polypropylene cartridges for domestic ro filtration systems. , supply and safe delivery of 10inch x2.5 inch granular activated carbon gac filter cartridges for use in industrial,commercial ro filtration systems makes-kr plus,hi tech,konvio neer,doc,ampereus , supply and safe delivery of wall-mountable ro filter cabinets suitable for 25 lph systems, including mounting brackets and all necessary wall-mounting accessories make whale 25lph , supply and safe delivery of 20-inch x 4 -inch jumbo wound sediment filter polypropylene yarn cartridges for commercial ro filtration systems

State Government

TRN :35722522 | 18 Nov, 2025

Tender Value : 0

Shahdol - Madhya Pradesh

Tender for gem bids for r410 gas, r 32 gas, r 22 gas, lpg gas, lpg, lpg flame, shampoo, copper tube, cotton waste, clamp meter, nitrogen pressure gas, refrigeration oil, capacitor, relay, control board, polyurethine foam, abs plastic, sheetalluminium, copper wire for wiring, silicon chipscapacitor, chalk, duster, photocopy paper, file cover, paper pin steel, nirma powder, modular plate, modularplate, modular switch, modular switch, modular socket, ceiling rose, angle holder, modular dummy, round plate, insulation tape, packing tape, condensor, sleeve, winding sheet, thread for winding, tarpin oil, grease, giwire, soldering wire, pvc clip, led bulb, straight holder, plug top, electrical wiring board, mcb box, single doormcb distribution box, mcb, insulator, modular board, modulate switch, fan regulator, led, copper wire, powerswitch, power socket, diode 4007, transistor, igbt, ujt, resistance, mosfet, pcb plate, soldering iron, desoldering pump, solder wire, solder paste or flux, general purpose pcb blanks, copper clad board, conecting wires, carbon film resistors various wattageand resistance values, capacitors different types ceramic, electrolytic, tantalum and voltage capacitance values, diodes general purpose, rectifiers, zener diodes, amplifieric, digital ic ex-nor gate, single phase center tappedstepdown transformer, spst switch, single way switch, two way switch, audio video cable, bnc connector, kitkat fuse, mcb fuse, rj45 connector, sata connector, scr, diac, triac, microcontrollers, battery, regulated ics, timer ic, ic base, dry cells, led bulbs, neon tester, ldr, opto coupler ic, logic gates ic, fip flop ic, counteric, decoder ic, op amp ic, function generator ic, fmtransmitter ic, receiver ic, piezo buzzer, frequencymultiplier ic, digital ics, optical fibre cable, ms flate, msround bar, power hexa blade, cutting tool, ms block, msgear blank piece, ms gear blank piecce, ms gear blankpiece, ms bar, ms sheet, ms filler rod

Central Government And Public Sector

TRN :35717518 | 14 Nov, 2025

Tender Value : 12.87 Lacs

Chamba - Himachal Pradesh

Tender for gem bids for d shackle 2 ton , d shackle 3 ton , d schackle 5 ton , d schackle 10 ton , d shackle 15 ton , u clamp 20mm for wire rope , u clamp 25mm for wire rope , u clamp 1-1by2 inch for wire rope , u clamp 1-1by4inch for wire rope , u clamp 16mm for wire rope , ms hex nipple dia 50 mm, length 150 mm , ms flange 6inch dia , ms flange 4inch dia , flange 5inch with nipple ms , gate valve 4inch flange inner dia 100mm outer dia 215mm , gas cutting nozzle 1by16inch , gas cutting nozzle 3by64inch , brass street elbow both end female with button head grease nipple 12mm , brass nipple dia 12mm length 3inch npt fitting , buffing wheel ms 4inch for angle grinder grit-80 , polishing and buffing wheel 4inch for ss material , grinding wheel 4inch , grinding wheel stone 8inch for bench grinder grit-60 , grinding wheel stone 8inch for bench grinder grit-150 , grinding wheel 5inch , grinding wheel 180mm , carbon brush for ag4 grinder , carbon brush for ag-5 grinder , carbon brush for ag-7 grinder , cutting wheel 100mm , cutting wheel 125mm , cutting wheel 180mm , hacksaw blade 1x12l double edge , emery paper fine , emery paper rough , welding copper cable 600amp , welding electrode ms e-6013 size 3.15x350mm , welding electrode ms e-6013 size 4x350mm , welding electrode mild steel e-7018 low hydrogen, size 2.5x350mm in kg , welding electrode mild steel e7018 low hydrogen, size 3.15mm x 450mm in kg , welding electrode mild steels e-7018 low hydrogen, size 4.00mm x 450mm in kg , welding electrode ss e-308 dia 3.15mm , welding electrode ss e-308 dia 4x350mm , welding electrode ss e-309-m 015 size 3.15mm x 350mm in kg , welding electrode e- 309 mo-15 4.0 mm , welding electrode ss e-309, mo15, size 2.5mm , hose clamp 0.5 inch , pneumatic hose pipe 1 rubber , plastic tarpaulin size 18x30inch , plastic tarpaulin 12ft x 12ft , tap set with adjustable handle 6 to 24mm , metric tap hss m16x2 set of 3 , tap set 22mm set of 3 , tap set 24mm set of 3 , drill bit 2mm hss , drill bits, 4mm hss , drill bit, 6mm hss , drill bit, 8 mm hss , drill bits, 10mm hss , drill bit, 14mm hss , drill bit, 16mm hss , drill bit, 18mm hss , drill bit, 22mm hss , drill bit 28mm hss , drill bit 30mm hss , drill bit hss with carbide tip, straight shank, 3 mm dia. , drill bit hss with carbide tip, straight shank, 5 mm dia. , drill bit hss countersink 1-1by2inch taper shank for sink hole , drill bit hss 16x2mm tapershank spiral flute taping , drill bit, spiral fluted tapping 22x2.5 mm hss, tapper shank , drill bit, spiral fluted tapping 24x3 mm hss, tapper shank , tungsten carbide brazed tip crancked turning and facing lathe tool bit 10mm length 100 mm set of 11pcs , tungsten carbide brazed tip for lathe machine , spring caliper inside outside divider 8inch set of 3 , ball pin hammer 500gm , chipping hammer , allen key 3by8 inch size , allen key 10mm size , allen key set sizes, 1.5mm to 10mm , slide wrench 12inch , slide wrench 15inch , round file 12 inch rough , file full round 12inch smooth , file half round rough 10 inch , file half round smooth 12 , file flat rough 12 , file flat smooth 12 , impact hex allen bit socket 3by8inchx1by2inch square drive female , impact hex allen bit socket 10mm x 1by2inch square drive female , chiesel 6 inch , chiesel 8 inch , screw driver kit consisting of 8 screw drivers , combination plier 8inch , long nose plier 215mm , wire stripper and cutter , spirit level 300mm 0.5mm accuracy magnetic , steel metal a-z alphabet letter and 0-9 number punch mark stamp , oxyzen regulator double stage , da regulator double stage , gas cutting torch , gas hose-oxyzen cylinder , gas hose-da cylinder , cutting wheel 355x3x25.4 mm , ball valve 3by4inch ss , welding holders 600amp , grease gun bucket type 10kg capacity , electric paint spray gun 750wby950mlby2.5mm nozleby32000rpm , black paint , white paint , yellow paint , blue paint , alluminium paint , smoke grey paint , epoxy coal tar paint black , epoxy primar coat gray base , red-oxide primar for enamel paint , p. o. red paint , thinner for epoxy paint , turpentine oil tarpin oil , painting brush 2inch , painting brush 3inch , painting brush 4inch , painting brush 5inch , twisted knot wire cup wheel brush 3inch , wire brush , anticorrosive solution wd-40 , rubber solution 200ml , loctite bonding 495, 20 ml vial , loctite 577 thread sealant 50ml , loctite 262 thread locker 50ml , m-seal gp epoxy compound , taflon tape , caution red tape polyster, 250 mtrs length , nylone rope 1inch , nylone rope 1by2inch , steel wire rope sling plain loop eye at both end rope size 24 mm length 3m , polyster endless round sling capacity 5 ton 8 mtr long , polystr nylon endless round sling 2 ton 5 mtrs , line tester length 130mm , rechargeable havy duty 10w led torch with emergency light , scissors 12inch , measuring tape 5 mtr , measuring tape 30mtrs , packing tape brown 2inch , steel scale 12inch , soap 125 gm , battery 1.5v dry cell , battery 1.5v iec lr-14 , permanent marker black , permanent marker red , permanent marker white , cotton waste , duster cloth , gum boot size 6 no , gum boot size 7 no , gum boot size 8 no , gum boot size 9 no , rubber hand gloves pair , welding gloves , cotton hand gloves , welding gogles , grinding goggle , face shield for welding works , industrial raspiratery protection mask dustbymist , safety belt full body with rope hook and shock absorber , hot oil protection suit , carbon brush for magnetic drill machine model swc-50 15.8x20x6.2, 220v , armature for magnetic drilling mc model swc-50 1500wby220v , ball bearing 6006 zz , wire rope pully block 5 ton rope dia 22 mm , ball bearing 6003 2rs , pipe wrench 18inch , ms elbow 90-degree dia 100mm , ms elbow 90- degree dia 2inch , drill bit countersink 1-1by4inch taper shank for sink hole , cutting electrode e-901 3.15mm x 450mm , pad-lock for doorsbygates 65mm round brass , earmuffs for noise reduction

Central Government/Public Sector

TRN :35692220 | 07 Nov, 2025

Tender Value : 30.33 Lacs

Margao - Goa

Tender for gem bids for acmc, acmc of 500 lph old ro plant, acmc of 500 lph new roplant, annual comprehensive maintenance of drinkingwater fountains 15 nos model m8cry make oasis, annualcomprehensive maintenance of 100 ltrs storage capacitystandalone water purification and dispensing units - 1styear, annual comprehensive maintenance of 100 ltrsstorage capacity standalone water purification anddispensing units - 2nd year, annual comprehensivemaintenance of 10 ltrs storage capacity of waterpurification system with 20 lph with ultraviolet disinfection- 1st year, annual comprehensive maintenance of 10 ltrsstorage capacity of water purification system with 20 lphwith ultraviolet disinfection - 2nd year, supply of criticalspares 500 lph ro plant sediment filter wound filter 20inch, 5 micron, outer dia- 4inch, supply of critical spares100 litres capacity standalone water purification anddispensing units pp sediment filter 20 inch, supply ofcritical spares 100 litres capacity standalone waterpurification and dispensing units carbon block filter 20 inch, supply of critical spares 100 litres capacity standalonewater purification and dispensing units ro membranecapacity 100 gpd 10 inch, supply of critical spares 100litres capacity standalone water purification anddispensing units cartridge carbon filter 10 inch, supply ofcritical spares 10 ltrs storage capacity of water purificationsystem sediment filter 10 inch, supply of critical spares 10ltrs storage capacity of water purification system carbonblock filter 10 inch, supply of critical spares 10 ltrs storagecapacity of water purification system uf membrane, supply of critical spares 10 ltrs storage capacity of waterpurification system uv lamps 4 w, supply of critical spares10 ltrs storage capacity of water purification systembooster pumps 24v dc, 75 gpd capacity /bid number: gem/2025/b/6804910* /dated: 18-10-2025 & & / bid document1 / 22

Central Government And Public Sector

TRN :35593558 | 08 Nov, 2025

Tender Value : 0

Angul - Orissa

Tender for gem bids for custom bid for services - cathode carbon block sealing, ramming, patch repairing of pot shells, anode rodding operation and refractory lining & de-lining of electrolytic pots in pcrs

Related Searched Keywords : carbon block

List of carbon-block Tenders

Tender for gem bids for custom bid for services - cathode carbon block sealing, ramming, patch repairing of pot shells, anode rodding operation and refractory lining & de-lining of electrolytic pots in pcrs

Get carbon block Tender Alert...

Related Searched Keywords : carbon block

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us