Filters

List of bricks Tenders

List of latest bricks Tenders in Indian Tenders. Click on any bricks Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bricks Tenders.

All-Tenders (51)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35951224 | 01 Dec, 2025

Tender Value : 12.72 Lacs

Kondagaon - Chhattisgarh

Tender for gem bids for fly ash bricks as per is 13757, is 12894 q3

State Government

TRN :35951434 | 22 Dec, 2025

Tender Value : 1.66 Lacs

Murshidabad - West Bengal

Tender for repairing of road by bricks bats from bahadur sk house to aktarul sk house at prodipdanga under humaipur gp apas/01/073/167/0023 repairing of road by bricks bats from bahadur sk house to aktarul sk house at prodipdanga under humaipur gp

State Government

TRN :35951820 | 22 Dec, 2025

Tender Value : 1.47 Lacs

Murshidabad - West Bengal

Tender for repairing of road by bricks bats from masjid to 120 icds centre at prodipdanga under humaipur gp apas/01/073/167/0021 repairing of road by bricks bats from masjid to 120 icds centre at prodipdanga under humaipur gp

Central Government/Public Sector

TRN :35957576 | 01 Dec, 2025

Tender Value : 0

Jalpaiguri - West Bengal

Tender for gem bids for boq, xlpe cable for working voltages up to and including 1.1 kvas per is 7098 part 1 q2, mcb - miniature circuit -breakers for a.c. operation as per is / iec 60898 part 1q2, modular piano type domestic electrical switches asper is 3854 q3, ceiling rose - is 371 q3, led battenq2, brick q3, surface excavation 30 cm deep andaveraging 15cm deep, excavating in post holes 0.5 cumgetting out, material and labour cement concrete 1 by 3 by6 type c2, returning filling incl spreading levellingwatering and ramming in layers, removing excavatedmaterial 50m and not exc 100m, material and labour forbrick works with fly ash bricks, material and labour forrendering 15mm thick in two coats, material and labourfor applying two coat of exterior emulsion paint, supply andfixing steel work in tubular trusses ms pipes in verticalcolumn, supply and fix galvalume alu coating gi basedsteel sheet 0.50mm thick in roof, s and f galvalume alucoating gi based plain steel sheet 0.50mm thick in ridges, material and labour for preparation of steel surfaces over 10cm width, material and labour for sand filling under floors, material and labour for hardcore of gauge 63 mm, materialand labour for 100 mm thick cement concrete type d2, providing and laying 80mm thick cement concrete paverblock of m40 grade, material and labour for pcc machinepressed precast apexstone kerb stone etc /bid number: gem/2025/b/6908397* /dated: 20-11-2025 & & / bid document1 / 24

State Government

TRN :35946503 | 28 Nov, 2025

Tender Value : 15.00 Lacs

Bikaner - Rajasthan

Tender for demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer-in-charge. demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar. dismantling tar felt over roofing complete including stacking of serviceable material and disposal of unserviceable material within 50-meter lead. grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) honey comb brick work half brick thick with bricks of class designation 75 upto five storey in:cement mortar1 : 6(1 cement : 6 coarse sand providing and applying acrylic emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification:paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.after the primer coat apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 kg/sqm on the surface of the interval of 3-4 hours. undulation on the surface is repair before the waterproofing work. p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-) providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : " pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand): flush/ ruled pointing " providing and fixing horizontal chajja of red/ white sand stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1 :4 ( 1 cement : 4 coarse sand) finishing walls with acrylic smooth exterior paint of required shade including all scaffolding.new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work " " labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. " providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia carriage of building rubbish stone metal (grit and ballast etc.) with a lead of 10 km

State Government

TRN :35947344 | 04 Dec, 2025

Tender Value : 38.75 Lacs

Dharmanagar - Tripura

Tender for protection of l.i scheme f i under mashauli gp from erosion of river manu at left bank under kumarghat block during the year 2024 25 sh supplying and placing of pvc wire crates filled with mixed class bricks bats on the left bank of river manu.

State Government

TRN :35947962 | 01 Dec, 2025

Tender Value : 35.00 Lacs

Barmer - Rajasthan

Tender for supply of ghadla/kankar/jhajhra mortar - clay/mud mixture kiln lime for lime masonry work cement ppc white cement fine aggregate sand/gravel gravel - local fly ash surkhi stone dust (for masonry use) gitti stone/brick (for other than road work) 40mm stone crushed grit (hand-crushed grit) (voids cut 1/11) 40mm stone crushed grit (crushed grit) (voids cut 1/11) 20mm stone crushed grit (crushed grit) 12/10/6mm stone crushed grit (crushed grit) brick crushed grit road material (including 5 km lead) 63-40mm crusher crushed stone crushed (voids cut 1/11) 63-40mm hand-crushed stone crushed (voids cut 1/11) 90-45 mm. hand-broken stone aggregate (1/11" voids cut) quarry rubbish (1/6" voids cut) gravel (1/6" voids cut) kankar (1/6" voids cut) binding material (pi 4-6) (1/6" voids cut) brick (22.5 x 11 x 7.50 cm) first class (1st class) second class (2nd class) soling/kharanja/masonry stone masonry berada (rr) masonry rudda (cr) kharanja soling (for floor work up to 15 cm height) kharanja soling (for road/kharanja work up to 23 cm height) jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12', thickness 2.5-3.5') stone chips (flaky material) (3-4" thick & length and width 1-2") sandstone (dpc, sill, coping, lintel, tand, almirah, etc.) up to 25mm thick up to 25-40mm thick up to 40-50mm thick up to 50-75mm thick up to 75-100mm thick up to 100-150mm thick flooring/strip paving katla stone floor paving up to 35mm thick, min. 3 sqft or more area strip paving katla 60-75mm thick, min. 3 sq ft or more area unpolished rough kota stone up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm polished kota stone (one side polished) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble stone (makrana adanga 20 mm thick) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble chips marble powder marble stone (rajnagar ii quality/local 20 mm thick) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm stone frame single patam size 100 x 75 mm. double patam size 125 x 75 mm. stone slabs up to 1.5 m length, minimum 40 mm thick 1.5 m to 2.4 m length, minimum 50 mm thick 2.4 m to 3.0 m length, minimum 65 mm thick above 3.0 m length, minimum 75 mm thick precast tiles / blocks glazed size - 30 x 45 cm mosaic size - 40 mm thick vitrified size - 60 x 60 cm interlock tiles/bricks/blocks for road work cement interlocking block m-30 grade, 60 mm thick cement interlocking block m-30 grade, 80 mm thick cement interlocking block m-30 grade, 100 mm thick fr pvc insulated copper conductor single core cable, isi marked 1.50 sq mm 2.50 sq mm 0.50 sq mm 1.00 sq mm 4.00 sq mm 6.00 sq mm local wood with fittings (for doors, windows, and furniture) mango acacia other factory-made doors (30 mm thick, solid core, single-pane) structural steel iron (tor steel fe 415/500 for reinforcement) winding wire 18 gauge iron girders conical iron/square rebar/patti/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strand/12 gauge wire and 14 gauge strand/14 gauge mesh iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick glass 3 mm thick glass paint enamel paint distemper (water bound) lime - for painting (saw / bud) primer (for iron/wood) petroleum products diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) gi sheet 24 gauge (0.63 mm) ms sheet 22 gauge (0.80 mm) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick gi sheet 22 gauge (0.80 mm) asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) green & yellow litheroof expo sheet (183x90) pipe gi 15 mm diameter (b class) gi 20 mm diameter (b class) gi 25 mm diameter (b class) ac 75 mm diameter ac 100 mm diameter pvc 90 mm diameter (with ring) pvc 110 mm diameter (with ring) pvc 140 mm diameter (with ring) pvc 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. orrisa w.c. european w.c. foot rest porcelain urinal with lipped hole (430350300mm) coupling, bracket, and pvc waste pipe washbasin (450x300mm) with coupling, bracket, and pvc waste pipe stone beam (sw) pipe 100 mm diameter, 0.6 m long cp pillar cock (15 mm diameter) (is mark) cp bib cock (15 mm diameter) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter 1000 mm diameter 750 mm diameter 600 mm diameter 450 mm diameter 300 mm diameter steel conduit (isi marked) 20 mm diameter 25 mm diameter charcoal pvc water tank with cover ( (conforms to is:12701-1989) 13/0.20 mm twin core pvc sheathed flat flexible copper cable steel fasteners 6 mm x 75 mm pvc conduit isi marked 25 mm diameter 20 mm diameter junction box 20 mm two-way 20 mm one-way 25 mm two-way 20 mm one-way (pvc) module gi box for 3 modules for 2 modules module base and cover plate for 2 modules for 3 modules modular switch one-way, isi marked sp 15/16 amperes sp 5/6 amperes

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

Central Government/Public Sector

TRN :35941411 | 11 Dec, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for item# 1: std refractory bricks is-8 size: 9 length x4.5 width x 3 t, item# 2: accoset cement-50 acemake or equivalent, item# 3: hfk insulation bricks size:9 lenth x 4.5 width x 3 t, item# 4: insulation bricksis-2042 size 9 x4.5 x3, item# 5: ceramic fibreblanket supercera l- 7 meters approx. x w-610 mm xt- 25 mm density: 128

State Government

TRN :35942437 | 28 Nov, 2025

Tender Value : 1.00 Crore

South Tripura - Tripura

Tender for finalization/approval of rate and empanelment of vendors for supply of 1st class bricks and 1st class over burnt bricks for various construction worksites under bc nagar rd block

Related Searched Keywords : bricks

List of bricks Tenders

Tender for gem bids for fly ash bricks as per is 13757, is 12894 q3

Tender for repairing of road by bricks bats from bahadur sk house to aktarul sk house at prodipdanga under humaipur gp apas/01/073/167/0023 repairing of road by bricks bats from bahadur sk house to aktarul sk house at prodipdanga under humaipur gp

Tender for repairing of road by bricks bats from masjid to 120 icds centre at prodipdanga under humaipur gp apas/01/073/167/0021 repairing of road by bricks bats from masjid to 120 icds centre at prodipdanga under humaipur gp

Tender for protection of l.i scheme f i under mashauli gp from erosion of river manu at left bank under kumarghat block during the year 2024 25 sh supplying and placing of pvc wire crates filled with mixed class bricks bats on the left bank of river manu.

Tender for finalization/approval of rate and empanelment of vendors for supply of 1st class bricks and 1st class over burnt bricks for various construction worksites under bc nagar rd block

Get bricks Tender Alert...

Related Searched Keywords : bricks

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us